You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
65<br />
Professional Boom Arms<br />
Professional<br />
Heavyweight<br />
Boom Arm<br />
STA010<br />
With an arm length<br />
of 282cm that is fully<br />
adjustable for both length and angle, and a<br />
5kg counterweight that can be adjusted for<br />
perfect weight balance, the boom arm is the<br />
perfect solution to the problems that arise<br />
whenever a light needs to be placed<br />
overhead and the stand that supports it<br />
needs to be kept out of shot.<br />
<strong>The</strong> recommended maximum load weight<br />
(lamp and any accessories used) is 10.5kg.<br />
This boom arm is ideal for nearly all flash<br />
heads, regardless of make, and can be used<br />
with heavy accessories such as beauty<br />
dishes. It comes complete with its own heavy<br />
stand, complete with castors. <strong>The</strong> height can<br />
be adjusted from 55-230cm at the swivel<br />
point. This boom arm should only be used<br />
with the heavy duty stand (supplied) and,<br />
as an additional safety measure, it should<br />
also be weighted.<br />
Professional Parallelogram Boom Arm<br />
This is a heavy duty Parrellegram Boom Set. Just set the flash head<br />
to the tilt angle you require and adjust the angle of the arm to the exact<br />
height you want to create the lighting effect you’re looking for (you can<br />
go up to a maximum height of just over 3 metres, and at its lowest<br />
setting it will nearly touch the floor. When you adjust the angle the<br />
parrellegram design maintains the exact angle, regardless of the setting.<br />
STA011<br />
<strong>The</strong> advantage of this is obvious for still photographers, because it<br />
will remove the need to change the angle of the flash head when the<br />
height is changed, which saves an enormous amount of time and<br />
greatly improves safety.<br />
And used with a simple double 5/8” female adapter & threaded<br />
spigot, a ball head or pan & tilt head can be added, the boom set<br />
can then be used with camcorders, dramatic effects can be obtained simply by raising<br />
and lowering the boom, changing the height of the shot whilst maintaining the angle of<br />
the camera!<br />
With a fixed arm length of 262cm that can be adjusted for angle, and a 9kg<br />
counterweight that can be adjusted for perfect weight balance, the boom arm is the<br />
perfect solution to the problems that arise whenever a light needs to be placed<br />
overhead and the stand that supports it needs to be kept out of shot. In addition to<br />
the 9kg counterweight, there is a sandbag to provide an additional counterweight<br />
if required.<br />
<strong>The</strong> recommended maximum load weight (lamp and any accessories used) is 10.5kg.<br />
This boom arm is ideal for nearly all flash heads, regardless of make, and can be used<br />
with heavy accessories such as beauty dishes.<br />
It comes complete with its own heavy duty wheeled stand, which must be weighted<br />
for extra safety. This boom arm can only be used with the stand supplied.
Change language