General Accessories On The Road - Ifor Williams

General Accessories
Towing accessories • Loading skids • Load restraint
• Cleaning products • Safety & Security
Contents
Loading Skids Page 70
On the road accessories: towballs & covers, stabiliser, socket tester & towing guides 69
Loading skids in steel and aluminium for LT/LM, Beavertail, Tipper & Tilt-bed trailer ranges 70
Load restraint, rope and rope hooks, ratchet straps, boxvan shoring poles and tie downs 71
Fenwick’s dedicated trailer and caravan cleaning and protective products 72
Safety & Security 73
Page

1
2
3
4
5
6
7
8
9
General Accessories
On The Road
P0233 Standard flange towball. 50mm ball.
P0421 Combination towball. 50mm ball and pin arrangement.
B0083 Towball cover. To fit standard bolt on type of tow ball.
B0084 Socket cover. To keep your 12N, 12S or 13pin towing socket
clean and dry, preventing those annoying lighting problems.
B0001 Socket tester. Test for correct function from the towing
vehicles 12N socket, complete with 5m cable.
C95020 Towing & the Law. By the Society of Motor Manufacturers
and Traders (SMMT) this booklet gives a valuble insight into
trailer and towing law with sections on tyres, lighting, couplings
etc. As well as towing with commercial vehicles and hints on
correct and safe loading.
C95015 Horsebox Trailer Towing Guide. A booklet on towing horsebox
trailers. Provides advice on all aspects of towing a horsebox
trailer and caring for your horse whilst in transit.
C95010 The Complete trailer manual. This Porter manual covers in depth
all areas of trailer ownership, use and maintenance with workshop
sections covering topics from re-wiring the 7 pin plug to replacing
brakes and bearings. It includes a DIY Trailer 'MOT' to ensure that
everything is legal and in perfect working order.
B0119 Safety Kit. Gloves, safety goggles, pair of dust masks,
ear defenders and hooded overall. (Contents may vary from
illustration)
5
3
9
2
6 7
4
1
8
Page
69

Page
1
2
3
4
5
6
LM167/B with optional headboard, skids, electric winch, prop stands and
lashing rings.
Skids to suit other models
CT177 page 132
CT115/CT136 page 133
GX Range pages 136, 137 & 138
Eurolight page 142
KX5566 Loading Skids. A pair of 1.8m (6') formed steel loading skids
to fit 8' long LT/LM and tippers.
KX5568 Loading Skids. A pair of 2.5m (8') formed steel loading skids
to fit LT/LM and tipper models 10' and over.
KX5596 Loading Skids. A pair of 1.8m (6') lightweight aluminium
skids to fit LT/LM and tippers.
KX5598 Loading Skids. A pair of 2.5m (8') lightweight aluminium
skids to fit LT/LM and tipper models 10’ and over.
C11450 Skid Latch. This small toggle holds the skid in place on
LT/LM/DP models. (2 per trailer)
The formed steel
and lightweight aluminium
skids were introduced in
April/May 1996 and are
stowed side by side
KS0900 Skid Flap Kit. LT / LM & DP120G – Covers the skid opening and
doubles as a number plate holder. Suitable for trailers
manufactured before April 1996
KS0901 Skid Flap Kit. Beavertail - Covers the skid opening and
doubles as light plate and number plate holder.
Will fit pre 96 & current models
KX5569 Loading Skids. A pair of 1.8m (6') lightweight loading skids
with timber infill centres. Suitable for trailers manufactured
before April 1996
General Accessories
Loading Skids to suit the LT/LM, Tiltbed,
Beavertail & Tipper range
3
6
1
4
For prop stand kits
please see pages
57, 58, 133 & 142
5
2

General Accessories
Load Restraint
1
2
3
4
5
6
7
8
9
10
11
12
13
2
P1046 Cargo strap. 3 metre long cargo strap.
P1049 Cargo strap. 8 metre long ratchet cargo strap.
P1042 Wheel strap. Specially designed for lashing vehicle wheels
on car transporters.
P1113 Lashing ring. Fixes through the floor to chassis to provide a low
profile lashing point (under-floor reinforcement may be required).
KX0200 Lashing ring. Contains recessed lashing ring with all fixings
(should be welded to chassis)
KX0201 Lashing ring. With all fixings GX.
KX0651 Light duty lashing point. Supplied as a pair complete with fixing
bolts, ideal for unbraked trailers BV64E, HB510XL & HB610
6
8
4
5
P12451 Rope cleat. Round plastic cleat used on P5 model.
C04663 Rope Hook. Used on the Low loader range of trailers.
1
13
C04664 Rope hook. Formed rope hook used on general duty trailer models.
C04667 Rope hook. This rope hook is riveted to the trailer and has a
lower profile than those used on other models.
Used on the P6E & P7E
C04669 Rope Hook. Used on the Eurolight range.
KS0204 Lashing Lugs. 1 pair. Fitted to the GX range.
P1340 Rope. 6mm woven polypropylene rope. (per metre).
B0119 Safety Kit. Gloves, safety goggles, pair of dust masks, ear defenders
and hooded overall. (Contents may vary from illustration).
12
7
3
9
10
14
15
16
14
16
P1050 Shoring pole. BV4 Series spring loaded pole
that fits between the receiver tracks to secure upright loads.
P1047 Shoring pole. BV5 Series spring loaded pole that fits
between the receiver tracks to secure upright loads.
P1048 Shoring pole. BV6 Series spring loaded pole that fits
between the receiver tracks to secure upright loads.
B0102A Elastic strap. Ideal for use with the Tack Pack kit, or
general lashing requirements. 32” length
B0102B Elastic strap. Ideal for use with the Tack Pack kit, or
general lashing requirements. 36” length.
B0102C Elastic strap. Ideal for use with the Tack Pack kit, or
general lashing requirements. 42” length.
P1035 Receiver track. Allows for the use of shoring poles, 2.40m.
P1036 Receiver track. Allows for the use of shoring poles, 3.10m.
P1037 Receiver track. Allows for the use of shoring poles, 3.62m.
11
15
BV85 twin axle with roller shutter
Page
71

Page
72
FENWICKS HORSEBOX AND
TRAILER CLEANER
When you have spent a lot of money on a horsebox or trailer,
it is important to keep it looking good and to protect it.
Fenwick’s Horsebox & Trailer Cleaner is specifically formulated
for cleaning both the interior and exterior of horseboxes and
trailers, with added fly repellent and sanitizer. It will remove
black streaks, diesel fumes, rust and drainage stains, algae,
moss, fungus, road and traffic film. It is safe on all surfaces
and all types of paintwork including airbrushed and
customised woodwork, aluminium, steel, galvanised steel,
rubber, fibreglass, decals, logos and mastics or sealant. There
is no other cleaner that is safer to use, or that is as economical
in use. The raw materials used for the manufacture of the
cleaner are also the most biodegradable in their class
regardless of cost, making sure that there is no other cleaner
that even comes close for biodegradability. Fenwick’s
Horsebox Cleaner cleans in a unique way, attracting dirt like a
magnet, it then surrounds the dirt and stops it from sticking.
Most other cleaners use aggressive agents e.g. sodium
hydroxide (caustic), metasilicates, acids, abrasives, or solvents
which can damage paintwork and metalwork.
3
2
1
2
3
4
General Accessories
Cleaning Products
B0112 Horsebox & trailer cleaner. For all trailer types. Effective removal
of black streaks, road traffic film, green algae, fungus, moss,
bird lime and drainage stains. This pleasant smelling solution
also contains fly repellent and sanitizer and can be used for
interior cleaning. (Up to 40 standard exterior washes from
this 1litre bottle). No acids, caustic, abrasives, silicon
or solvents
B0108 Caravan cleaner. Easily cleans all exterior surfaces including
acrylic windows. Removes black streaks, green algae and
road grime. (Up to 40 washes from this 1litre bottle).
Ideal for use on G.R.P surfaces such as those found on
our boxvan range.
B0110 Bobby Dazzler. A unique protective coating applied during
rinsing. No need to polish. Keeps vehicle cleaner for longer
and makes cleaning next time easier. Contains algae inhibitor.
(Up to 60 washes per bottle).
B0111 Overwintering. Cost effective winter protection.
Helps prevent green algae growth and water ingress.
The vehicle stays cleaner and makes spring cleaning easier.
When diluted this 1litre bottle will protect 50 square metres.
4
1
HB506

Safety & Security
Visual Deterrents
1
2
2
2
3
4
5
6
7
KX8105 Ifor Williams Coupling Head Lock. For all Ifor Williams trailers with
Avonride coupling heads, this lock is designed to encase the
operating handle and lock sections of the coupling head to prevent
unauthorised operation or tampering of the components within.
Tested and approved to the coveted Gold Standard by Sold Secure.
This means the product offers the top level of resistance against
the dedicated thief. Supplied with two keys, dummy ball and
waterproof cover.
B0025 Lock chain. Hardened square links with protective
nylon cover, 8mm - 0.91M.
B0026 Lock chain. Hardened square links with protective
nylon cover, 10mm - 0.91M.
B0027 Lock chain. Hardened square links with protective
nylon cover, 10mm - 2M.
B0028 Padlock. High security rating (shrouded shackle)
Size (Throat/diameter) 25/8.
B0029 Padlock. Laminated steel body and hardened shackle,
special bumper to prevent damage to locked item.
Size (Throat/diameter) 59/8.
B0030 Padlock. Solid brass body with hardened steel pin.
Square throat design. Size (Throat/diameter) 12/10.
B0031 Padlock. Set of 6 padlocks all keyed alike, ideal for
toolboxes or trailer ramps. Size (Throat/diameter) 24/6.
B0032 Padlock. Laminated steel body and hardened shackle,
cover to prevent damage to locked item.
Size (Throat/diameter) 18/6.
6
2
4
Available from
Autumn 2009
5
Coupling head
lock manufactured
by Ifor Williams
3
7
1
Page
73