Rod Pumps and Components - Production Solutions
Rod Pumps and Components - Production Solutions
Rod Pumps and Components - Production Solutions
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Rod</strong> <strong>Pumps</strong> <strong>and</strong> <strong>Components</strong>
table of contents<br />
Introduction 3<br />
About NOV Monoflo............................................................................................................................................4<br />
Sucker <strong>Rod</strong> Pump Overview...............................................................................................................................6<br />
API Pump Designation.........................................................................................................................................8<br />
Artificial Lift Systems Specifications...................................................................................................................10<br />
API <strong>Pumps</strong> 13<br />
API St<strong>and</strong>ard RH <strong>Pumps</strong>...................................................................................................................................14<br />
API St<strong>and</strong>ard RS <strong>Pumps</strong>...................................................................................................................................18<br />
API St<strong>and</strong>ard RW <strong>Pumps</strong>...................................................................................................................................20<br />
API St<strong>and</strong>ard RX <strong>Pumps</strong>...................................................................................................................................26<br />
API St<strong>and</strong>ard TH <strong>Pumps</strong>...................................................................................................................................28<br />
Pump <strong>Components</strong> 31<br />
Barrels............................................................................................................................................32<br />
Bushings............................................................................................................................................38<br />
Cages............................................................................................................................................42<br />
Connectors......................................................................................................................................48<br />
Couplings............................................................................................................................................50<br />
Guides............................................................................................................................................58<br />
Seating Nipples...................................................................................................................................................60<br />
Nipple Extensions...............................................................................................................................................64<br />
Plugs..............................................................................................................................................66<br />
Plungers............................................................................................................................................68<br />
Pullers............................................................................................................................................72<br />
Valve <strong>Rod</strong>s...........................................................................................................................................................74<br />
Seating Assemblies - Friction...........................................................................................................................76<br />
Seating Assemblies - Mechanical....................................................................................................................82<br />
Pull Tubes............................................................................................................................................................86<br />
Valves............................................................................................................................................88<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
1
about nov monoflo<br />
NOV Monoflo<br />
Since 1841, National Oilwell Varco ® has been dedicated to ensuring customers receive the highest quality oilfield<br />
products <strong>and</strong> services. National Oilwell Varco is a worldwide leader in the design, manufacture <strong>and</strong> sale of equipment<br />
<strong>and</strong> components used in oil <strong>and</strong> gas drilling <strong>and</strong> production operations, the provision of oilfield services, <strong>and</strong> supply<br />
chain integration services to the upstream oil <strong>and</strong> gas industry. NOV ® also provides supply chain services through its<br />
network of more than 200 distribution service centers located near major drilling <strong>and</strong> production activity worldwide.<br />
We continue to build upon our unlimited, customer-focused solutions <strong>and</strong> are proud to deliver our Artificial Lift<br />
Systems through the NOV Monoflo division.<br />
The NOV Monoflo division is a true partner <strong>and</strong> worldwide source for complete artificial lift equipment <strong>and</strong> packaged<br />
solutions. Our artificial lift professionals collaborate with you to determine customized artificial lift solutions that<br />
optimize your production.<br />
• Professional Well Evaluation<br />
• Surface <strong>and</strong> Subsurface Equipment<br />
• Controllers <strong>and</strong> <strong>Production</strong> Automation<br />
• All <strong>Production</strong> Accessories <strong>and</strong> Expendables<br />
• Global Supply Chain <strong>and</strong> Service <strong>Solutions</strong><br />
NOV Monoflo provides several Artificial Lift Systems to fit the many different well conditions <strong>and</strong> needs seen in the<br />
oilfield.<br />
Hydraulic <strong>Rod</strong> Pumping Systems<br />
NOV Monoflo hydraulic rod pumping systems are high performance<br />
production systems that are ideal for many oil <strong>and</strong> gas<br />
applications. These systems use patented technologies that will<br />
optimize your oilfield production, reduce production costs <strong>and</strong><br />
allow you to maximize the profitability of each well.<br />
Our complete hydraulic rod pump system includes surface level<br />
hydraulic pumping mast which mounts directly to the wellhead,<br />
an EPA certified power skid (natural gas or electric), downhole<br />
sucker rods pumps <strong>and</strong> components, <strong>and</strong> a revolutionary controller<br />
with an easy-to-use touch screen display.<br />
Common Applications<br />
• Oil <strong>and</strong> gas production<br />
• Dewatering gas wells<br />
• Highly deviated wells<br />
• Coal bed methane (CBM)<br />
• Remote locations<br />
Features <strong>and</strong> Benefits<br />
• Low Set up costs<br />
• Minimal install time (requires 3 hours <strong>and</strong> 1 ton picker truck)<br />
• Small footprint - minimal environmental impact<br />
• Quick <strong>and</strong> easy adjustments to stroke speed <strong>and</strong> length<br />
• Variable stroke speed for optimal pump filling<br />
• Manufactured in ISO 9001 certified facility<br />
4
Progressing Cavity Pump Systems<br />
NOV Monoflo is a leader in the design, manufacture <strong>and</strong> supply of progressing<br />
cavity pumps (PC pumps). With over 75 years of experience, 8 international<br />
sites <strong>and</strong> a global distribution network, we provide a range of PC pump solutions<br />
that fullfill many oilfield production needs. Our line of downhole PC pumps<br />
are designed for use in both oil production <strong>and</strong> dewatering applications where<br />
the economics of production dem<strong>and</strong> efficiency, reliability <strong>and</strong> low life-cycle<br />
cost from the production equipment.<br />
Common Applications<br />
• Heavy Crude<br />
• Medium Crude<br />
• Coal Bed Methane - CBM<br />
• Shale Oil <strong>and</strong> Water<br />
• High GOR Wells<br />
Features <strong>and</strong> Benefits<br />
• Lower Capital Cost<br />
• Lower Running Cost<br />
• Reliable<br />
• Environmentally Acceptable Profile<br />
Plunger Lift Systems<br />
NOV Monoflo plunger lift technology is an effective <strong>and</strong> efficient technique of<br />
increasing <strong>and</strong> optimizing oil <strong>and</strong> gas wells which have marginal flow trends.<br />
The plunger lift system harnesses the ability of a mechanical plunger to act as a<br />
sealing interface between the formation gas <strong>and</strong> the produced well bore liquids.<br />
Creating a turbulent seal between the gas <strong>and</strong> liquids <strong>and</strong> utilizing the well’s<br />
own energy for lifting, liquids are pushed to the surface virtually eradicating liquid<br />
fall back. This increases inflow by reducing the average flowing bottom hole<br />
pressure.<br />
The system is comprised of a well specific plunger, a bottom hole bumper<br />
spring, a specialized lubricator <strong>and</strong> catcher assembly, <strong>and</strong> our line of controllers<br />
for automation <strong>and</strong> arrival sensing. With Plunger Lift systems advanced controls<br />
<strong>and</strong> wide variety of optimization solutions, NOV Monoflo is able to offer a cost<br />
effective solution <strong>and</strong> environmentally friendly method of artificial lift.<br />
Common Applications<br />
• Dewatering liquid loading gas wells<br />
• Wells that are currently being soaped<br />
• Wells with high gas-to-oil ratio<br />
• Paraffin <strong>and</strong> hydrate control<br />
Features <strong>and</strong> Benefits<br />
• High Efficiency<br />
• Self-optimizing controllers<br />
• Sweet <strong>and</strong> sour equipment options<br />
• Built to API specifications<br />
• Environmentally friendly<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
5<br />
Int<strong>Rod</strong>uCtIon
sucker rod pump overview<br />
Subsurface <strong>Pumps</strong><br />
When the pressure in an oil reservoir is depleted to the point where the well will no longer flow, some artificial means<br />
of lift must be used to bring the oil to the surface. The most generally accepted means of artificial lift is the Subsurface<br />
Sucker <strong>Rod</strong> Pump, actuated by a pumping unit <strong>and</strong> a sucker rod string.<br />
There are two basic types of Subsurface <strong>Pumps</strong>, the Tubing Pump <strong>and</strong> the Insert Pump. The Tubing Pump Barrel is<br />
threaded directly onto the bottom of the production tubing, <strong>and</strong> is installed near the bottom of the well immersed in<br />
the oil within the well casing. The plunger is run into the tubing on the sucker rod string. Generally a st<strong>and</strong>ing valve<br />
puller is run between the bottom of the plunger as well as the separate st<strong>and</strong>ing valve. This makes the removal of the<br />
st<strong>and</strong>ing valve optional when pulling the sucker rods <strong>and</strong> plunger. The plunger, traveling valve, <strong>and</strong> st<strong>and</strong>ing valve<br />
can be serviced simply by pulling the rods, but it requires removal of the tubing to service the pump barrel.<br />
An Insert Pump is run into the well on the rods as a complete unit. A seating assembly on the pump engages a seating<br />
nipple on the tubing when the pump is run in, or installed. After the well has pumped up, the additional pressure<br />
of oil in the tubing combined with the flow line pressure holds the pump firmly in place. The entire <strong>Rod</strong> Pump is<br />
removable, <strong>and</strong> therefore may be serviced merely by pulling the sucker rod string.<br />
API Subsurface Pump designations<br />
The old API St<strong>and</strong>ard 11A defined elements which were primarily threads <strong>and</strong> critical dimensions of various parts<br />
to insure interchangeability of these parts among all pump manufacturers. The new API St<strong>and</strong>ard 11AX defines elements,<br />
but in addition defines pitch lengths of parts so that the pull tube, pull rod <strong>and</strong> maximum stroke lengths of any<br />
designated API pump are now interchangeable.<br />
This made it possible to designate a complete API pump assembly. The Letter Designations are the portion of the<br />
complete API part number most frequently used, <strong>and</strong> we will attempt to describe the use of these <strong>and</strong> the actual<br />
well conditions calling for the various types of pumps indicated in the letter designations. *Reference the API Pump<br />
Designation table on page 8.<br />
The first letter is either R or T, the R st<strong>and</strong>ing for <strong>Rod</strong> (commonly called insert) <strong>and</strong> the T for Tubing pumps. Usually<br />
Insert pumps are the first choice because they can be serviced simply by pulling the sucker rod string. Tubing pumps<br />
require pulling the tubing in order to service the pump barrel. Since Tubing <strong>Pumps</strong> do have a larger bore <strong>and</strong> consequently<br />
greater capacity, they are used where a large volume of production is the first requirement.<br />
The second letter is either H, or W. The H st<strong>and</strong>s for a heavy-wall barrel of one-piece construction. This barrel is externally<br />
threaded, permitting a pump to be spaced so that the plunger may stroke out both ends of the barrel if desired.<br />
The heavy wall designation may be applied to either Insert or Tubing pumps. With Insert pumps, the API sizes are<br />
1 1/16” <strong>and</strong> 1 1/4” for 2 3/8” tubing, 1 1/2” <strong>and</strong> 1 3/4” for 2 7/8” tubing <strong>and</strong> 2 1/4” for 3” tubing. In Tubing pumps, API<br />
sizes are 1 3/4” for 2 3/8” tubing, 2 1/4” for 2 7/8” tubing <strong>and</strong> 2 3/4” for 3 1/2” tubing.<br />
The W st<strong>and</strong>s for Thin Wall Barrel. The Thin Wall Barrel is 1/8” wall <strong>and</strong> is internally threaded. It is therefore, not possible<br />
to stroke the plunger out either end as it is in the smaller bore, but externally threaded heavy wall or tubing<br />
pump barrel. The Thin Wall Barrel is not used in Tubing <strong>Pumps</strong>. API sizes are 1 1/2” bore for 2 3/8” tubing, 2” bore<br />
for 2 7/8” tubing, <strong>and</strong> 2 1/2” bore for 3 1/2” tubing. A 1 1/4” bore for 2 3/8” tubing is also frequently furnished.<br />
The third letter (which is omitted for tubing pumps as the position of the holddown for these pumps is not variable)<br />
designates the location of the seating assembly, which can be either A, B or T as illustrated below:<br />
• A - Stationary barrel top anchor. This pump has the hold-down at the top of the barrel, so the entire barrel <strong>and</strong><br />
st<strong>and</strong>ing valve of the pump extend below the pump seating nipple.<br />
• B - Stationary barrel, bottom anchor pump. This pump has the hold-down on the bottom. The st<strong>and</strong>ing valve <strong>and</strong><br />
entire pump are above the hold-down inside the production tubing.<br />
• T - Traveling barrel bottom anchor pump. This pump has the hold-down on the bottom of a section of hollow pull<br />
tube below the plunger. The st<strong>and</strong>ing valve is at the top of the plunger. The entire pump is above the holddown <strong>and</strong><br />
remains inside the production tubing.<br />
6
Each of the three types has inherent advantages that require its use under certain pumping conditions. Each has at<br />
least one limitation that makes its use undesirable under other conditions. In many ways, any one of the three types<br />
may do equally well, but under difficult producing conditions selection of the proper type is of greater importance. In<br />
most cases, the experience of the operators in a given field will be the determining factor in selecting the proper type<br />
of pump for a well. For further information, please see the API PUMPS section beginning on page 13.<br />
The fourth letter is either C or M. A seating assembly employing seating cups is designated as C. A cup seating<br />
assembly has the lowest first cost, <strong>and</strong> is a reliable means of seating a pump (one time only). When a cup seating<br />
assembly is used, a slight interference fit between the cups <strong>and</strong> the seating nipple holds the pump down until the<br />
well pumps up. A cup seating assembly has the disadvantage that when the pump is unseated, portions of the cups<br />
frequently will tear away from the m<strong>and</strong>rel. A strainer nipple should be used to keep this debris from entering the<br />
pump. In addition, on a rod part fishing job when a cup seating assembly is used, it is usually desirable to retrieve<br />
the pump to change cups, even though the parted rod was at a shallow depth. This concern can be addressed with<br />
the use of steel or brass friction rings; this configuration can be seated <strong>and</strong> unseated a number of times without the<br />
danger of seating assembly failure. It is referred to as “FR” in the API designation nomenclature.<br />
A seating assembly employing a metal seal is designated M. In the case of the API Mechanical Bottom Lock seating<br />
assembly, the seal is generally brass or soft steel. Either of these can be reseated several times without replacing. A<br />
spring lock holds the pump down while the well is pumping up.<br />
In the case of the API Mechanical Top Lock seating assembly, these generally rely on precision ground stainless steel<br />
rings which serve as both the no-go <strong>and</strong> the sealing ring when they engage a second stainless ring in the top lock<br />
seating nipple in the tubing string. A spring lock holds the pump down while the well is pumping up. The Mechanical<br />
Top Lock, like the Bottom Lock, can be reseated numerous times without replacing.<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
7<br />
Int<strong>Rod</strong>uCtIon
api pump designation<br />
The basic types of pumps <strong>and</strong> letter designation covered by this specification are as follows:<br />
Complete pump designations include: (1) nominal tubing size, (2) basic bore diameter, (3) type of pump, including<br />
type of barrel <strong>and</strong> location <strong>and</strong> type of seating assembly, (4) barrel length, (5) plunger length, (6) length of<br />
upper extension (when used), <strong>and</strong> (7) length of lower extension (when used) as follows:<br />
8<br />
<strong>Rod</strong> <strong>Pumps</strong><br />
Type of Pump<br />
Metal Plunger <strong>Pumps</strong> Soft-Packed Plunger <strong>Pumps</strong><br />
Heavy-Wall<br />
Barrel<br />
Thin-Wall<br />
Barrel<br />
Stationary Barrel, Top Anchor RHA RWA<br />
Stationary Barrel, Bottom Anchor RHB/RXB RWB<br />
Heavy-Wall<br />
Barrel<br />
Thin-Wall<br />
Barrel<br />
Traveling Barrel, Bottom Anchor RWT RST<br />
Tubing <strong>Pumps</strong> TH TH<br />
XX - XXX X X X X X - X - X - X<br />
Tubing size:<br />
Pump bore (basic):<br />
Length of upper extension, whole feet.<br />
Nominal Plunger length, feet.<br />
Barrel length, feet.<br />
Type seating assembly:<br />
Location of seating assembly:<br />
(omitted for tubing pumps)<br />
Type Barrel:<br />
Type Pump:<br />
15 - 1.900 in. OD.<br />
20 - 2 3/8 in. OD.<br />
25 - 2 7/8 in. OD.<br />
30 - 3 1/2 in. OD.<br />
40 - 4 1/2 in. OD.<br />
106 - 1 1/16 in.<br />
125 - 1 1/4 in.<br />
150 - 1 1/2 in.<br />
175 - 1 3/4 in.<br />
178 - 1 25/32 in.<br />
200 - 2 in.<br />
225 - 2 1/4 in.<br />
250 - 2 1/2 in.<br />
275 - 2 3/4 in.<br />
H - Heavy-wall<br />
W - Thin-wall<br />
OS - Oversize<br />
S - Soft Packed<br />
X - Heavy-wall (Int. Threaded)<br />
R - <strong>Rod</strong><br />
T - Tubing<br />
(48.3 mm)<br />
(60.3 mm)<br />
(73.0 mm)<br />
(88.9 mm)<br />
(114.3 mm)<br />
(26.9 mm)<br />
(31.8 mm)<br />
(38.1 mm)<br />
(44.5 mm)<br />
(45.2 mm)<br />
(50.8 mm)<br />
(57.2 mm)<br />
(63.5 mm)<br />
(69.9 mm)<br />
C - Cup Type<br />
M - Mechanical<br />
FR - Friction Ring<br />
Length of lower extension, whole feet.<br />
A - Top<br />
B - Bottom<br />
T - Bottom, traveling barrel
Example: A 1 ¼ in. (31.8 mm) bore rod type pump with a 10 ft. (3.048 m) heavy wall barrel <strong>and</strong> 2 ft. (0.610 m) of<br />
upper extensions, 1 ft. of lower extension, a 4 ft. (1.219 m) plunger, <strong>and</strong> a bottom cup type seating assembly for<br />
operation in 2 3/8 in. (60.3 mm) tubing would be designated as follows:<br />
In addition to the pump designation described on page 8, it is necessary for the purchaser to provide the following<br />
additional information:<br />
a. Barrel material<br />
b. Plunger material<br />
c. Valve material<br />
d. Plunger fit<br />
e. Seating Cup material<br />
f. Fitting material<br />
20-125-RHBC-10-4-2-1<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
9<br />
Int<strong>Rod</strong>uCtIon
artificial lift systems specifications<br />
Form of Lift<br />
Maximum<br />
operating depth,<br />
tVd (ft/m)<br />
Maximum<br />
operating volume<br />
(BFPd)<br />
Maximum<br />
operating<br />
temperature<br />
(˚F/˚C)<br />
Corrosion<br />
H<strong>and</strong>ling<br />
10<br />
Capillary<br />
technologies<br />
22,000<br />
6,705<br />
ESP Gas Lift Hydraulic Jet Hydraulic Lift PCP Plunger Lift <strong>Rod</strong> Lift<br />
15,000<br />
4,572<br />
18,000<br />
4,572<br />
15,000<br />
4,572<br />
17,000<br />
5,182<br />
12,000<br />
3,658<br />
19,000<br />
5,791<br />
500 60,000 50,000 20,000 8,000 4,500 200 6,000<br />
400˚<br />
204˚<br />
400˚<br />
204˚<br />
450˚<br />
232˚<br />
550˚<br />
288˚<br />
Excellent Good Good to excellent Excellent Good Fair Excellent Good to excellent<br />
Gas H<strong>and</strong>ling Excellent Fair Excellent Good Fair Good Excellent Fair to good<br />
Solids H<strong>and</strong>ling Good Fair Good Good Fair Excellent Fair Fair to good<br />
Fluid Gravity<br />
(˚API)<br />
Servicing Capillary Unit<br />
Prime Mover<br />
offshore<br />
application<br />
>8˚ >10˚ >15˚ >8˚ >8˚ 15˚ >8˚<br />
Well’s natural<br />
energy<br />
Workover or<br />
pulling rig<br />
Wireline or<br />
workover rig<br />
550˚<br />
288˚<br />
Hydraulic or wireline<br />
250˚<br />
121˚<br />
Workover or<br />
pulling rig<br />
Electric motor Compressor Multicylinder or electric Gas or electric<br />
550˚<br />
288˚<br />
Wellhead catcher<br />
or wireline<br />
Well’s natural<br />
energy<br />
16,000<br />
4,878<br />
550˚<br />
288˚<br />
Workover or<br />
pulling rig<br />
Gas or electric<br />
Good Excellent Excellent Excellent Good Limited N/A Limited<br />
System efficiency N/A 35% to 60% 10% to 30% 10% to 30% 45% to 55% 50% to 75% N/A 45% to 60%
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
Int<strong>Rod</strong>uCtIon
api st<strong>and</strong>ard rh pumps<br />
RHAC/RHAM<br />
API type RHA pumps are heavy wall, stationary barrel, top anchor design insertable pumps. Available with either 3<br />
cup type hold down (RHAC) or with a mechanical lock hold down (RHAM), RHA pumps allow a greater operating<br />
depth due to their heavy wall barrel. Insertable pumps can be removed from the well without having to remove the<br />
production tubing. Top anchor design means ideal for s<strong>and</strong>y wells.<br />
diagram<br />
Reference no.<br />
14<br />
API Pump designations 20-125 RHAC 25-150 RHAC 25-175 RHAC 30-225 RHAC<br />
tubing Size<br />
2 3/8" 2 7/8" 2 7/8" 3 1/2"<br />
Pump Bore 1 1/4" 1 1/2" 1 3/4" 2 1/4"<br />
API Part no. description NOV Monoflo Part No.<br />
1 B21 Bushing, Valve <strong>Rod</strong> BU020A99 BU025A99 BU025A99 BU030A99<br />
2 B22 Bushing, Barrel Cage BU020B99 BU025B99 BU025B99 BU030B99<br />
3 C12 Cage, Top Plunger CA125B99 CA150X99 CA175B99 CA225B99<br />
4 C13 Cage, Closed Plunger CA125C99 CA150C99 CA175C99 CA225C99<br />
5 C14 Cage, Closed Barrel CA020D99 CA025D99 CA025D99 CA030D99<br />
6 G11 Guide, Valve <strong>Rod</strong> GU020A60 GU025A60 GU025A60 GU030A60<br />
7 P12 Plug, Seat PG125B99 PG150B99 PG175B99 PG225B99<br />
8 (RHAC)<br />
S11, 12, 13,<br />
14, 15<br />
Hold Down Assembly, Cup (Type HR) SC020K99 SC025K99 SC025K99 SC030K99<br />
9 (RHAM) S21 Hold Down Assembly, Mechanical Top Type SM020F99 SM025F99 SM025F99 SM030F99<br />
10 B12 Barrel, Heavy Wall (Chrome Plate) BA125B10* BA150B10* BA175B10* BA225B10*<br />
11 P21 Plunger, One Piece (Spray Metal) PN125A70* PN150A70* PN175A70* PN225A70*<br />
12 V11 Valve, Ball & Seat (Travelling) VA125A9811 VA150A9811 VA175A9811 VA225A9811<br />
13 V11 Valve, Ball & Seat (St<strong>and</strong>ing) VA175A9811 VA225A9811 VA225A9811 VA250A9811<br />
14 C31 Coupling, Extension (Upper) CU125A99* CU150A99* CU175A99* CU225A99*<br />
15 C31 Coupling, Extension (Lower) CU125A99* CU150A99* CU175A99* CU225A99*<br />
16 R11 <strong>Rod</strong>, Valve RV020A99* RV025A99* RV025A99* RV030A99*<br />
17 (RHAC) N11 Seating Nipple, Cup Type 1 SN020A99012 SN025A99012 SN025A99012 SN030A99012<br />
18 (RHAM) N14 Seating Nipple, Mechanical Top Lock 1 SN020D99 SN025D99 SN025D99 SN030D99<br />
* Length to be specified in whole inches (144 for a 12 foot length, Example: BA106B10144). Plungers will have an additional letter at the end representing clearance<br />
(fit) to be specified in thous<strong>and</strong>ths of an inch(B for a Pump Bore -0.001 inches, Example: PN106A70024B).<br />
1 Not included with assembly.<br />
For all of the above, see the Pump <strong>Components</strong> section of the catalogue for available lengths <strong>and</strong> materials (starting on page 31)
1<br />
16<br />
3<br />
11<br />
4<br />
12<br />
7<br />
6<br />
RHAC PuMP ASSEMBLY<br />
15<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
8<br />
14<br />
10<br />
15<br />
5<br />
13<br />
2<br />
9 (RHAM)<br />
17<br />
18 (RHAM)<br />
API PuMPS
api st<strong>and</strong>ard rh pumps<br />
RHBC/RHBM<br />
API type RHB pumps are heavy wall, stationary barrel, top anchor design insertable pumps. Available with either 3<br />
cup type hold down (RHBC) or with a mechanical lock hold down (RHBM), RHB pumps allow a greater operating<br />
depth due to their heavy wall barrel. Insertable pumps can be removed from the well without having to remove the<br />
production tubing. Bottom anchor design means ideal for deeper wells.<br />
diagram<br />
Reference no.<br />
16<br />
API Pump designations 15-106 RHBC 20-106 RHBC 20-125 RHBC 25-150 RHBC 25-175 RHBC 30-225 RHBC<br />
tubing Size<br />
1.900" 2 3/8" 2 3/8" 2 7/8" 2 7/8" 3 1/2"<br />
Pump Bore 1 1/16" 1 1/16" 1 1/4" 1 1/2" 1 3/4" 2 1/4<br />
API Part no. description NOV Monoflo Part No.<br />
1 B21 Bushing, Valve <strong>Rod</strong> BU015A99 BU020A99 BU020A99 BU025A99 BU025A99 BU030A99<br />
2 C12 Cage, Top Plunger CA106B99 CA106B99 CA125B99 CA150X99 CA175B99 CA225B99<br />
3 C13 Cage, Closed Plunger CA106C99 CA106B99 CA125C99 CA150C99 CA175C99 CA225C99<br />
4 C14 Cage, Closed Barrel CA015D99 CA020D99 CA020D99 CA025D99 CA025D99 CA030D99<br />
5 C21 Connector, Upper Barrel CN015A99 CN020A99 CN020A99 CN025A99 CN025A99 CN030A99<br />
6 G11 Guide, Valve <strong>Rod</strong> GU015A60 GU020A60 GU020A60 GU025A60 GU025A60 GU030A60<br />
7 P12 Plug, Seat PG106B99 PG106B99 PG125B99 PG150B99 PG175B99 PG225B99<br />
8 (RHBC)<br />
S11, 12,<br />
13, 14, 16<br />
9 (RHBM) S22<br />
10 B12<br />
11 P21<br />
12 V11<br />
13 V11<br />
14 C31<br />
15 C31<br />
Hold Down Assembly, Cup<br />
(Type HR) 2 SC015Z99 SC020L99 SC020L99 SC025L99 SC025L99 SC030L99<br />
Hold Down Assembly,<br />
Mechanical Bottom Type<br />
SM015K99 SM020K99 SM020K99 SM025K99 SM025K99 SM030K99<br />
Barrel, Heavy Wall (Chrome<br />
Plate)<br />
BA106B10* BA106B10* BA125B10* BA150B10* BA175B10* BA225B10*<br />
Plunger, One Piece (Spray<br />
Metal)<br />
PN106A70* PN106A70* PN125A70* PN150A70* PN175A70* PN225A70*<br />
Valve, Ball & Seat<br />
(Traveling)<br />
VA106A9811 VA106A9811 VA125A9811 VA150A9811 VA175A9811 VA225A9811<br />
Valve, Ball & Seat<br />
(St<strong>and</strong>ing)<br />
VA150A9811 VA175A9811 VA175A9811 VA225A9811 VA225A9811 VA250A9811<br />
Coupling, Extension<br />
(Upper)<br />
CU106Y99* CU106A99* CU125A99* CU150A99* CU175A99* CU225A99*<br />
Coupling, Extension<br />
(Lower)<br />
CU106Y99* CU106A99* CU125A99* CU150A99* CU175A99* CU225A99*<br />
16 R11 <strong>Rod</strong>, Valve RV020A99* RV020A99* RV020A99* RV025A99* RV025A99* RV030A99*<br />
17 (RHBC) N11 Seating Nipple, Cup Type 1 SN015A99012 SN020A99012 SN020A99012 SN025A99012 SN025A99012 SN030A99012<br />
18 (RHBM) N12<br />
Seating Nipple, Mechanical<br />
Bottom 1 SN015B99 SN020B99 SN020B99 SN025B99 SN025B99 SN030B99<br />
* Length to be specified in whole inches (144 for a 12 foot length, Example: BA106B10144). Plungers will have an additional letter at the end representing clearance<br />
(fit) to be specified in thous<strong>and</strong>ths of an inch(B for a Pump Bore -0.001 inches, Example: PN106A70024B).<br />
1 Not included with assembly.<br />
2 1.900 inch pump uses Type-O hold down<br />
For all of the above, see the Pump <strong>Components</strong> section of the catalogue for available lengths <strong>and</strong> materials (starting on page 31)
1<br />
16<br />
2<br />
11<br />
3<br />
12<br />
7<br />
RHBC PuMP ASSEMBLY<br />
17<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
6<br />
5<br />
14<br />
10<br />
15<br />
4<br />
13<br />
8<br />
17<br />
18 (RHBM)<br />
9 (RHBM)<br />
API PuMPS
api st<strong>and</strong>ard rs pumps<br />
RStC/RStM<br />
API type RST pumps are thin wall, soft packed travelling barrel, bottom anchor design insertable pumps. Available<br />
with either 3 cup type hold down (RSTC) or with a mechanical lock hold down (RSTM). Insertable pumps can be<br />
removed from the well without having to remove the production tubing.<br />
diagram<br />
Reference no.<br />
18<br />
API Pump designations 20-125 RStC 20-150 RStC 25-200 RStC 30-250 RStC<br />
tubing Size<br />
2 3/8" 2 3/8" 2 7/8" 3 1/2"<br />
Pump Bore 1 1/4" 1 1/2" 2" 2 1/2"<br />
API Part no. description NOV Monoflo Part No.<br />
1 C11 Cage, Top Open CA020A99 CA020A99 CA025A99 CA030A99<br />
2 C17 Cage, Top Plunger CA125G99 CA150G99 CA200G99 CA250G99<br />
3 C21 Connector, Upper Barrel CN020X99 CN020A99 CN025A99 CN030A99<br />
4 C32 Coupling, Pull Tube, Upper CU125B99 CU150B99 CU200B99 CU250B99<br />
5 C33 Coupling, Pull Tube, Lower CU125C99 CU150C99 CU200C99 CU225C99<br />
6 P11 Plug, Pull PG125A99 PG150X99 PG200X99 PG225X99<br />
7 (RSTC)<br />
S11, 12, 13,<br />
14, 16<br />
Hold Down Assembly, Cup (Type HR) SC020L99 SC020L99 SC025L99 SC030L99<br />
8 (RSTM) S22 Hold Down Assembly, Mechanical Bottom Type SM020K99 SM020K99 SM025K99 SM030K99<br />
9 T11 Tube, Pull PT125A99* PT150A99* PT200A99* PT225A99*<br />
10 B14 Barrel, Soft Packed (Chrome Plated) BA125D10* BA150D10* BA200D10* BA250D10*<br />
11 P24 Plunger, Soft Packed - Pressure Actuated (Spray Metal) PN125H70* PN150H70* PN200H70* PN250H70*<br />
12 V11 Valve, Ball & Seat (Travelling) VA175A9811 VA175A9811 VA225A9811 VA250A9811<br />
13 V11 Valve, Ball & Seat (St<strong>and</strong>ing) VA125A9811 VA150A9811 VA200A9811 VA250A9811<br />
14 (RSTC) N11 Seating Nipple, Cup Type 1 SN020A99012 SN020A99012 SN025A99012 SN030A99012<br />
15 (RSTM) N12 Seating Nipple, Mechanical Bottom 1 SN020B99 SN020B99 SN025B99 SN030B99<br />
* Length to be specified in whole inches (144 for a 12 foot length, Example: BA106B10144). Plungers will have an additional letter at the end representing clearance<br />
(fit) to be specified in thous<strong>and</strong>ths of an inch(B for a Pump Bore -0.001 inches, Example: PN106A70024B).<br />
1 Not included with assembly.<br />
For all of the above, see the Pump <strong>Components</strong> section of the catalogue for available lengths <strong>and</strong> materials (starting on page 31)
14<br />
15 (RSTM)<br />
8 (RSTM)<br />
7<br />
2<br />
13<br />
13<br />
11<br />
4<br />
9<br />
5<br />
RStC PuMP ASSEMBLY<br />
19<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
1<br />
12<br />
3<br />
10<br />
6<br />
API PuMPS
api st<strong>and</strong>ard rw pumps<br />
RWAC/RWAM<br />
API type RWA pumps are thin wall, stationary barrel, top anchor design insertable pumps. Available with either 3<br />
cup type hold down (RWAC) or with a mechanical lock hold down (RWAM), RWA pumps give the largest available<br />
bore size for an insert pump due to the thin wall barrel, meaning more displacement with each stroke <strong>and</strong> therefore<br />
greater production. Insertable pumps can be removed from the well without having to remove the production tubing.<br />
Top anchor design means ideal for s<strong>and</strong>y wells.<br />
diagram<br />
Reference no.<br />
20<br />
API Pump designations 20-125 RWAC 20-150 RWAC 25-200 RWAC 30-250 RWAC<br />
tubing Size<br />
2 3/8" 2 3/8" 2 7/8" 3 1/2"<br />
Pump Bore 1 1/4" 1 1/2" 2" 2 1/2"<br />
API Part no. description NOV Monoflo Part No.<br />
1 B21 Bushing, Valve <strong>Rod</strong> BU020A99 BU020A99 BU025A99 BU030A99<br />
2 B22 Bushing, Barrel Cage BU020B99 BU020B99 BU025B99 BU030B99<br />
3 C12 Cage, Top Plunger CA125B99 CA150B99 CA200B99 CA250B99<br />
4 C13 Cage, Closed Plunger CA125C99 CA150C99 CA200C99 CA250C99<br />
5 C14 Cage, Closed Barrel CA020W99 CA020D99 CA025D99 CA030D99<br />
6 G11 Guide, Valve <strong>Rod</strong> GU020A60 GU020A60 GU025A60 GU030A60<br />
7 P12 Plug, Seat PG125B99 PG150B99 PG200B99 PG250B99<br />
8 (RWAC)<br />
S11, 12, 13,<br />
14, 15<br />
Hold Down Assembly, Cup (Type HR) SC020K99 SC020K99 SC025K99 SC030K99<br />
9 (RWAM) S21 Hold Down Assembly, Mechanical Top Type SM020F99 SM020F99 SM025F99 SM030F99<br />
10 B11 Barrel, Thin Wall (Chrome Plate) BA125A10* BA150A10* BA200A10* BA250A10*<br />
11 P21 Plunger, One Piece (Spray Metal) PN125A70* PN150A70* PN200A70* PN250A70*<br />
12 V11 Valve, Ball & Seat (Travelling) VA125A9811 VA150A9811 VA200A9811 VA250A9811<br />
13 V11 Valve, Ball & Seat (St<strong>and</strong>ing) VA175A9811 VA175A9811 VA225A9811 VA250A9811<br />
14 R11 <strong>Rod</strong>, Valve RV020A99* RV020A99* RV025A99* RV030A99*<br />
15 (RWAC) N11 Seating Nipple, Cup Type 1 SN020A99012 SN020A99012 SN025A99012 SN030A99012<br />
16 (RWAM) N14 Seating Nipple, Mechanical Top Lock 1 SN020D99 SN020D99 SN025D99 SN030D99<br />
* Length to be specified in whole inches (144 for a 12 foot length, Example: BA106B10144). Plungers will have an additional letter at the end representing clearance<br />
(fit) to be specified in thous<strong>and</strong>ths of an inch(B for a Pump Bore -0.001 inches, Example: PN106A70024B).<br />
1 Not included with assembly.<br />
For all of the above, see the Pump <strong>Components</strong> section of the catalogue for available lengths <strong>and</strong> materials (starting on page 31)
1<br />
14<br />
3<br />
11<br />
4<br />
12<br />
7<br />
RWAC PuMP ASSEMBLY<br />
21<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
6<br />
8<br />
10<br />
5<br />
13<br />
2<br />
9 (RWAM)<br />
15<br />
16 (RWAM)<br />
API PuMPS
api st<strong>and</strong>ard rw pumps<br />
RWBC/RWBM<br />
API type RWB pumps are thin wall, stationary barrel, bottom anchor design insertable pumps. Available with either<br />
3 cup type hold down (RWBC) or with a mechanical lock hold down (RWBM), RWB pumps give the largest available<br />
bore size for an insert pump due to the thin wall barrel, meaning more displacement with each stroke <strong>and</strong><br />
therefore greater production. Insertable pumps can be removed from the well without having to remove the production<br />
tubing. Bottom anchor design means ideal for deeper wells.<br />
diagram<br />
Reference no.<br />
22<br />
API Pump designations 15-125 RWBC 20-125 RWBC 20-150 RWBC 25-200 RWBC 30-250 RWBC<br />
tubing Size<br />
1.900" 2 3/8" 2 3/8" 2 7/8" 3 1/2"<br />
Pump Bore 1 1/4" 1 1/4" 1 1/2" 2" 2 1/2"<br />
API Part no. description NOV Monoflo Part No.<br />
1 B21 Bushing, Valve <strong>Rod</strong> BU015A99 BU020A99 BU020A99 BU025A99 BU030A99<br />
2 C12 Cage, Top Plunger CA125B99 CA125B99 CA150B99 CA200B99 CA250B99<br />
3 C13 Cage, Closed Plunger CA125C99 CA125C99 CA150C99 CA200C99 CA250C99<br />
4 C14 Cage, Closed Barrel CA015D99 CA020W99 CA020D99 CA025D99 CA030D99<br />
5 C21 Connector, Upper Barrel CN015A99 CN020X99 CN020A99 CN025A99 CN030A99<br />
6 G11 Guide, Valve <strong>Rod</strong> GU015A60 GU020A60 GU020A60 GU025A60 GU030A60<br />
7 P12 Plug, Seat PG125B99 PG125B99 PG150B99 PG200B99 PG250B99<br />
8 (RWBC)<br />
S11, 12, 13,<br />
14, 16<br />
9 (RWBM) S22<br />
Hold Down Assembly, Cup (Type HR) 2 SC015Z99 SC020L99 SC020L99 SC025L99 SC030L99<br />
Hold Down Assembly, Mechanical Bottom<br />
Type<br />
SM015K99 SM020K99 SM020K99 SM025K99 SM030K99<br />
10 B11 Barrel, Thin Wall (Chrome Plate) BA125A10* BA125A10* BA150A10* BA200A10* BA250A10*<br />
11 P21 Plunger, One Piece (Spray Metal) PN125A70* PN125A70* PN150A70* PN200A70* PN250A70*<br />
12 V11 Valve, Ball & Seat (Travelling) VA125A9811 VA125A9811 VA150A9811 VA200A9811 VA250A9811<br />
13 V11 Valve, Ball & Seat (St<strong>and</strong>ing) VA150A9811 VA175A9811 VA175A9811 VA225A9811 VA250A9811<br />
14 R11 <strong>Rod</strong>, Valve RV020A99* RV020A99* RV020A99* RV025A99* RV030A99*<br />
15 (RWBC) N11 Seating Nipple, Cup Type 1 SN015A99012 SN020A99012 SN020A99012 SN025A99012 SN030A99012<br />
16 (RWBM) N12 Seating Nipple, Mechanical Bottom 1 SN015B99 SN020B99 SN020B99 SN025B99 SN030B99<br />
* Length to be specified in whole inches (144 for a 12 foot length, Example: BA106B10144). Plungers will have an additional letter at the end representing clearance<br />
(fit) to be specified in thous<strong>and</strong>ths of an inch(B for a Pump Bore -0.001 inches, Example: PN106A70024B).<br />
1 Not included with assembly.<br />
2 1.900 inch pump uses Type-O hold down<br />
For all of the above, see the Pump <strong>Components</strong> section of the catalogue for available lengths <strong>and</strong> materials (starting on page 31)
1<br />
14<br />
2<br />
11<br />
3<br />
12<br />
7<br />
RWBC PuMP ASSEMBLY<br />
23<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
6<br />
5<br />
10<br />
4<br />
13<br />
8<br />
15<br />
16 (RWBM)<br />
9 (RWBM)<br />
API PuMPS
api st<strong>and</strong>ard rw pumps<br />
RWtC/RWtM<br />
API type RWT pumps are thin wall, travelling barrel, bottom anchor design insertable pumps. Available with either<br />
3 cup type hold down (RWTC) or with a mechanical lock hold down (RWTM), RWT pumps are ideal for wells with<br />
high levels of particulates due to their travelling barrel configuration, meaning less chance of the pump becoming<br />
stuck in the well. Insertable pumps can be removed from the well without having to remove the production tubing.<br />
diagram<br />
Reference no.<br />
24<br />
API Pump designations 15-125 RWtC 20-125 RWtC 20-150 RWtC 25-200 RWtC 30-250 RWtC<br />
tubing Size<br />
1.900" 2 3/8" 2 3/8" 2 7/8" 3 1/2"<br />
Pump Bore 1 1/4" 1 1/4" 1 1/2" 2" 2 1/2"<br />
API Part no. description NOV Monoflo Part No.<br />
1 C11 Cage, Top Open CA015A99 CA020A99 CA020A99 CA025A99 CA030A99<br />
2 C12 Cage, Top Plunger CA125B99 CA125B99 CA150B99 CA200B99 CA250B99<br />
3 C21 Connector, Upper Barrel CN015A99 CN020X99 CN020A99 CN025A99 CN030A99<br />
4 C32 Coupling, Pull Tube, Upper CU125B99 CU125B99 CU150B99 CU200B99 CU250B99<br />
5 C33 Coupling, Pull Tube, Lower CU125X99 CU125C99 CU150C99 CU200C99 CU225C99<br />
6 P11 Plug, Pull PG125A99 PG125A99 PG150X99 PG200X99 PG225X99<br />
7 (RWTC)<br />
S11, 12, 13,<br />
14, 16<br />
8 (RWTM) S22<br />
Hold Down Assembly, Cup (Type HR) 2 SC015Z99 SC020L99 SC020L99 SC025L99 SC030L99<br />
Hold Down Assembly, Mechanical Bottom<br />
Type<br />
SM015K99 SM020K99 SM020K99 SM025K99 SM030K99<br />
9 T11 Tube, Pull PT125A99* PT125A99* PT150A99* PT200A99* PT225A99*<br />
10 B11 Barrel, Thin Wall (Chrome Plate) BA125A10* BA125A10* BA150A10* BA200A10* BA250A10*<br />
11 P21 Plunger, One Piece (Spray Metal) PN125A70* PN125A70* PN150A70* PN200A70* PN200A70*<br />
12 V11 Valve, Ball & Seat (Travelling) VA150A9811 VA175A9811 VA175A9811 VA225A9811 VA250A9811<br />
13 V11 Valve, Ball & Seat (St<strong>and</strong>ing) VA125A9811 VA125A9811 VA150A9811 VA200A9811 VA250A9811<br />
14 (RWTC) N11 Seating Nipple, Cup Type 1 SN015A99012 SN020A99012 SN020A99012 SN025A99012 SN030A99012<br />
15 (RWTM) N12 Seating Nipple, Mechanical Bottom 1 SN015B99 SN020B99 SN020B99 SN025B99 SN030B99<br />
* Length to be specified in whole inches (144 for a 12 foot length, Example: BA106B10144). Plungers will have an additional letter at the end representing clearance<br />
(fit) to be specified in thous<strong>and</strong>ths of an inch(B for a Pump Bore -0.001 inches, Example: PN106A70024B).<br />
1 Not included with assembly.<br />
2 1.900 inch pump uses Type-O hold down<br />
For all of the above, see the Pump <strong>Components</strong> section of the catalogue for available lengths <strong>and</strong> materials (starting on page 31)
14<br />
15 (RWTM)<br />
8 (RWTM)<br />
7<br />
2<br />
13<br />
11<br />
4<br />
9<br />
5<br />
RWtC PuMP ASSEMBLY<br />
25<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
1<br />
12<br />
3<br />
10<br />
6<br />
API PuMPS
api st<strong>and</strong>ard rx pumps<br />
RXBC/RXBM<br />
API type RXB pumps are heavy wall, stationary barrel, bottom anchor design insertable pumps. Available with<br />
either 3 cup type hold down (RXBC) or with a mechanical lock hold down (RXBM), RXB pumps give the largest<br />
available bore size for an insert pump due to the thin wall barrel, meaning more displacement with each stroke <strong>and</strong><br />
therefore greater production, but have a slightly thicker wall than a st<strong>and</strong>ard RWB pump which allows for a greater<br />
seating depth. Insertable pumps can be removed from the well without having to remove the production tubing.<br />
Bottom anchor design means ideal for deeper wells.<br />
diagram<br />
Reference no.<br />
26<br />
API Pump designations 20-125 RXBC 20-150 RXBC 25-200 RXBC<br />
tubing Size<br />
2 3/8" 2 3/8" 2 7/8"<br />
Pump Bore 1 1/4" 1 1/2" 2"<br />
API Part no. description NOV Monoflo Part No.<br />
1 B21 Bushing, Valve <strong>Rod</strong> BU020A99 BU020A99 BU025A99<br />
2 C12 Cage, Top Plunger CA125B99 CA150B99 CA200B99<br />
3 C13 Cage, Closed Plunger CA125C99 CA150C99 CA200C99<br />
4 C14 Cage, Closed Barrel CA020W99 CA020D99 CA025D99<br />
5 C21 Connector, Upper Barrel CN020X99 CN020A99 CN025A99<br />
6 G11 Guide, Valve <strong>Rod</strong> GU020A60 GU020A60 GU025A60<br />
7 P12 Plug, Seat PG125B99 PG150B99 PG200B99<br />
8 (RXBC)<br />
S11, 12, 13,<br />
14, 16<br />
Hold Down Assembly, Cup (Type HR) SC020L99 SC020L99 SC025L99<br />
9 (RXBM) S22 Hold Down Assembly, Mechanical Bottom Type SM020K99 SM020K99 SM025K99<br />
10 B16 Barrel, Heavy Wall BA125F10* BA150F10* BA200F10*<br />
11 P21 Plunger, One Piece (Spray Metal) PN125A70* PN150A70* PN200A70*<br />
12 V11 Valve, Ball & Seat (Travelling) VA125A9811 VA150A9811 VA200A9811<br />
13 V11 Valve, Ball & Seat (St<strong>and</strong>ing) VA175A9811 VA175A9811 VA225A9811<br />
14 R11 <strong>Rod</strong>, Valve RV020A99* RV020A99* RV025A99*<br />
15 (RXBC) N11 Seating Nipple, Cup Type 1 SN020A99012 SN020A99012 SN025A99012<br />
16 (RXBM) N12 Seating Nipple, Mechanical Bottom 1 SN020B99 SN020B99 SN025B99<br />
* Length to be specified in whole inches (144 for a 12 foot length, Example: BA106B10144). Plungers will have an additional letter at the end representing clearance<br />
(fit) to be specified in thous<strong>and</strong>ths of an inch(B for a Pump Bore -0.001 inches, Example: PN106A70024B).<br />
1 Not included with assembly.<br />
For all of the above, see the Pump <strong>Components</strong> section of the catalogue for available lengths <strong>and</strong> materials (starting on page 31)
1<br />
14<br />
2<br />
11<br />
3<br />
12<br />
7<br />
RXBC PuMP ASSEMBLY<br />
27<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
6<br />
5<br />
10<br />
4<br />
13<br />
8<br />
15<br />
16 (RXBM)<br />
9 (RXBM)<br />
API PuMPS
api st<strong>and</strong>ard th pumps<br />
tHC/tHM<br />
API type TH pumps are heavy wall, stationary barrel, bottom anchor design tubing pumps. Available with either 3<br />
cup type hold down (THC) or with a mechanical lock hold down (THM), TH pumps give the largest possible bore<br />
size for a given tubing size, meaning the maximum amount of displacement with each stroke <strong>and</strong> therefore the<br />
greatest possible production.<br />
diagram<br />
Reference no.<br />
28<br />
API Pump designations 20-175 tHC 25-225 tHC 30-275 tHC 40-375 tHM<br />
tubing Size<br />
2 3/8" 2 7/8" 3 1/2" 4 1/2"<br />
Pump Bore 1 3/4" 2 1/4" 2 3/4" 3 3/4"<br />
API Part no. description NOV Monoflo Part No.<br />
1 C11 Cage, Top Open CA020A99 CA025A99 CA030A99 CA040A99<br />
2 C13 Cage, Closed Plunger CA175C99 CA225C99 CA275C99 CA375C99<br />
3 C16 Cage, St<strong>and</strong>ing Valve CA175F99 CA225F99 CA275F99 CA375F99<br />
4 (THC) N13 Seating Nipple, Cup Type (Tubing) 3 SN020C99 SN025C99 SN030C99<br />
5 (THM) N12 Seating Nipple, Mechanical Bottom SN020B99 SN025B99 SN030B99 SN040B99<br />
6 P31 Puller, St<strong>and</strong>ing Valve 4 PU175E99 PU225E99 PU275E99 PU275E99<br />
7 B23 Bushing, Optional 4 BU040D99<br />
8 C34 Coupling, Tubing CU020D99 CU025D99 CU030D99 CU040D99<br />
9 C35 Coupling, Barrel CU020E99 CU025E99 CU030E99 CU040E99<br />
10 (THC)<br />
S13, 14, 16,<br />
17, 18<br />
Hold Down Assembly, Cup (Type HR - Tubing) 3 SC020V99 SC025V99 SC030V99<br />
11 (THM) S22 Hold Down Assembly, Mechanical Bottom Type SM020K99 SM025K99 SM030K99 SM040K99<br />
12 B13 Barrel, Heavy Wall (Chrome Plate) BA175C10* BA225C10* BA275C10* BA375C10*<br />
13 P21 Plunger, One Piece (Spray Metal) PN175A70* PN225A70* PN275A70* PN375A70*<br />
14 V11 Valve, Ball & Seat (Travelling), Optional VA175A9811 VA225A9811 VA250A9811 VA375A9811<br />
15 V11 Valve, Ball & Seat (St<strong>and</strong>ing) VA175A9811 VA225A9811 VA250A9811 VA375A9811<br />
16 N21 Nipple Extension, Upper 1 NE020A99* NE025A99* NE030A99* NE040A99*<br />
17 N22 Nipple Extension, Lower 1 NE020B99* NE025B99* NE030B99* NE040B99*<br />
* Length to be specified in whole inches (144 for a 12 foot length, Example: BA106B10144). Plungers will have an additional letter at the end representing clearance<br />
(fit) to be specified in thous<strong>and</strong>ths of an inch(B for a Pump Bore -0.001 inches, Example: PN106A70024B).<br />
1 Not included with assembly.<br />
3 40-375 Available as THM only.<br />
4 40-375 uses 2 3/4 inch Puller with adaptor bushing<br />
For all of the above, see the Pump <strong>Components</strong> section of the catalogue for available lengths <strong>and</strong> materials (starting on page 31)
(11 THM)<br />
1<br />
14 (Optional)<br />
13<br />
2<br />
14<br />
7 (Optional)<br />
15<br />
6<br />
3<br />
10<br />
29<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
8<br />
16<br />
9<br />
12<br />
9<br />
17<br />
8<br />
4<br />
tHC PuMP ASSEMBLY<br />
(5 THM)<br />
API PuMPS
arrels<br />
32<br />
API type RW, thin Wall Barrels<br />
Pump Bore diameter<br />
(+0.002/-0.000”)<br />
Coating <strong>and</strong> Part number<br />
thread Reference o/dia API number Plain Chrome nickel Carbide<br />
1.250” 1.3330-16 1.500” B11-125 BA125A98* BA125A10* BA125A20*<br />
1.500” 1.5730-16 1.750” B11-150 BA150A98* BA150A10* BA150A20*<br />
2.000” 2.0870-16 2.250” B11-200 BA200A98* BA200A10* BA200A20*<br />
2.500” 2.5730-16 2.750” B11-250 BA250A98* BA250A10* BA250A20*<br />
* Length to be specified in whole inches (API st<strong>and</strong>ard barrel lengths are 8 feet to 30 feet in 2 foot increments. 144 for a 12 foot length, Example: BA125A98144).<br />
Barrel Material Prefix KA = Steel<br />
KB = Brass<br />
KC = Stainless Steel<br />
Example: 12 foot long, 1 1/2 inch pump bore, thin wall steel barrel with chrome plate = KA BA150A10144<br />
BA150A10
API type RH, Heavy Wall Barrels<br />
Pump Bore diameter<br />
(+0.002/-0.000”)<br />
Coating <strong>and</strong> Part number<br />
thread Reference o/dia API number Plain Chrome nickel Carbide Carbonitride<br />
1.0625” 1.3125-16 1.375” B12-106 BA106B98* BA106B10* BA106B20* BA106B30*<br />
1.250” 1.5730-16 1.625” B12-125 BA125B98* BA125B10* BA125B20* BA125B30*<br />
1.500” 1.8750-16 2.000” B12-150 BA150B98* BA150B10* BA150B20* BA150B30*<br />
1.750” 2.0870-16 2.250” B12-175 BA175B98* BA175B10* BA175B20* BA175B30*<br />
2.250” 2.5730-16 2.750” B12-225 BA225B98* BA225B10* BA225B20* BA225B30*<br />
* Length to be specified in whole inches (API st<strong>and</strong>ard barrel lengths are 8 feet to 30 feet in 2 foot increments. 144 for a 12 foot length, Example: BA125A98144).<br />
Barrel Material Prefix KA = Steel<br />
KB = Brass<br />
KC = Stainless Steel<br />
Example: 12 foot long, 1 1/2 inch pump bore, heavy wall steel barrel with chrome plate = KA BA150B10144<br />
BA150B10<br />
33<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
arrels<br />
34<br />
API type tH, Heavy Wall Barrels<br />
Pump Bore diameter<br />
(+0.002/-0.000”)<br />
Coating <strong>and</strong> Part number<br />
thread Reference o/dia API number Plain Chrome nickel Carbide Carbonitride<br />
1.750” 2.2380-11.5 2.250” B13-175 BA175C98* BA175C10* BA175C20* BA175C30*<br />
2.250” 2.7380-11.5 2.750” B13-225 BA225C98* BA225C10* BA225C20* BA225C30*<br />
2.750” 3.2380-11.5 3.250” B13-275 BA275C98* BA275C10* BA275C20* BA275C30*<br />
3.750” 4.2380-11.5 4.250” B13-375 BA375C98* BA375C10* BA375C20* BA375C30*<br />
* Length to be specified in whole inches (API st<strong>and</strong>ard barrel lengths are 8 feet to 30 feet in 2 foot increments. 144 for a 12 foot length, Example: BA125A98144).<br />
Barrel Material Prefix KA = Steel<br />
KB = Brass<br />
KC = Stainless Steel<br />
Example: 12 foot long, 2 1/4 inch pump bore, heavy wall tubing steel barrel with chrome plate = KA BA225C10144<br />
BA225C10
API type RS, thin Wall Soft Packed Barrels<br />
Pump Bore diameter<br />
(+0.0062/-0.0022”)<br />
Coating <strong>and</strong> Part number<br />
thread Reference o/dia API number Plain Chrome nickel Carbide<br />
1.250” 1.3330-16 1.500” B14-125 BA125D98* BA125D10* BA125D20*<br />
1.500” 1.5730-16 1.750” B14-150 BA150D98* BA150D10* BA150D20*<br />
2.000” 2.0870-16 2.250” B14-200 BA200D98* BA200D10* BA200D20*<br />
2.500” 2.5730-16 2.750” B14-250 BA250D98* BA250D10* BA250D20*<br />
* Length to be specified in whole inches (API st<strong>and</strong>ard barrel lengths are 8 feet to 30 feet in 2 foot increments. 144 for a 12 foot length, Example: BA125A98144).<br />
Barrel Material Prefix KA = Steel<br />
KB = Brass<br />
KC = Stainless Steel<br />
Example: 12 foot long, 1 1/2 inch pump bore, thin wall soft packed steel barrel with chrome plate = KA BA150D10144<br />
BA150d10<br />
35<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
arrels<br />
API, Heavy Wall Soft Packed tubing Barrels<br />
Pump Bore diameter<br />
(+0.0062/-0.0022”)<br />
36<br />
Coating <strong>and</strong> Part number<br />
thread Reference o/dia API number Plain Chrome nickel Carbide Carbonitride<br />
1.7812” 178-11.5 2.250” B15-178 BA178E98* BA178E10* BA178E20* BA178E30*<br />
2.250” 225-11.5 2.750” B15-225 BA225E98* BA225E10* BA225E20* BA225E30*<br />
2.750” 275-11.5 3.250” B15-275 BA275E98* BA275E10* BA275E20* BA275E30*<br />
* Length to be specified in whole inches (API st<strong>and</strong>ard barrel lengths are 8 feet to 30 feet in 2 foot increments. 144 for a 12 foot length, Example: BA125A98144).<br />
Barrel Material Prefix KA = Steel<br />
KB = Brass<br />
KC = Stainless Steel<br />
Example: 12 foot long, 2 1/4 inch pump bore, heavy wall soft packed tubing steel barrel with chrome plate = KA BA225E10144<br />
BA178E98
API type RX, Heavy Wall Barrels<br />
Pump Bore diameter<br />
(+0.002/-0.000”)<br />
Coating <strong>and</strong> Part number<br />
thread Reference o/dia API number Plain Chrome nickel Carbide<br />
1.250” 1.3330-16 1.625” B16-125 BA125F98* BA125F10* BA125F20*<br />
1.500” 1.5730-16 1.875” B16-150 BA150F98* BA150F10* BA150F20*<br />
2.000” 2.0870-16 2.312” B16-200 BA200F98* BA200F10* BA200F20*<br />
* Length to be specified in whole inches (API st<strong>and</strong>ard barrel lengths are 8 feet to 30 feet in 2 foot increments. 144 for a 12 foot length, Example: BA125A98144).<br />
Barrel Material Prefix KA = Steel<br />
KB = Brass<br />
KC = Stainless Steel<br />
Example: 12 foot long, 1 1/2 inch pump bore, heavy wall (RX) steel barrel with chrome plate = KA BA150F10144<br />
BA150F10<br />
37<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
ushings<br />
tubing Size Sucker <strong>Rod</strong> Pin<br />
38<br />
API Valve <strong>Rod</strong> Bushings<br />
Modified Line<br />
Pipe Box<br />
Material <strong>and</strong> Part number<br />
o/dia API number Steel Brass Stainless<br />
1.900” 5/8” 3/8” 1.250” B21-15 KF BU015A99 KG BU015A98 KH BU015A98<br />
2 3/8” 3/4” 3/8” 1.500” B21-20 KF BU020A99 KG BU020A98 KH BU020A98<br />
2 7/8” 3/4” 1/2” 1.625” B21-25 KF BU025A99 KG BU025A98 KH BU025A98<br />
3 1/2” 3/4” 3/4” 1.625” B21-30 KF BU030A99 KG BU030A98 KH BU030A98<br />
Bu020A99
tubing Size Pin thread<br />
API Barrel Cage Bushings<br />
Line<br />
Pipe Box<br />
Material <strong>and</strong> Part number<br />
o/dia API number Steel Brass Stainless<br />
1.900” 1.2500-14 3/4” 1.438” B22-15 KF BU015B99 KG BU015B98 KH BU015B98<br />
2 3/8” 1.4704-14 1” 1.750” B22-20 KF BU020B99 KG BU020B98 KH BU020B98<br />
2 7/8” 1.8024-14 1 1/4” 2.250” B22-25 KF BU025B99 KG BU025B98 KH BU025B98<br />
3 1/2” 2.1095-11.5 1 1/2” 2.750” B22-30 KF BU030B99 KG BU030B98 KH BU030B98<br />
Bu020B99<br />
39<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
ushings<br />
40<br />
API Cage to Puller Bushings<br />
Material <strong>and</strong> Part number<br />
tubing Size Pin thread Box thread o/dia API number Steel Brass Stainless<br />
4 1/2” 3.1715-11.5 2.1095-11.5 3.625” B23-40 KF BU040D99 KG BU040D98 KH BU040D98
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
cages<br />
tubing<br />
Size<br />
42<br />
Valve<br />
Size<br />
API top open Cages<br />
Sucker<br />
<strong>Rod</strong> Pin<br />
Box thread o/dia<br />
API<br />
number<br />
Steel<br />
Alloy +<br />
Stellite Lined<br />
Material <strong>and</strong> Part number<br />
Brass Stainless<br />
Stainless +<br />
Stellite Lined<br />
1.900” V11-150 5/8” 1.2500-14 1.438” C11-15 KF CA015A99 KE CA015A80 KG CA015A98 KH CA015A98 KH CA015A80<br />
2 3/8” V11-175 3/4” 1.4704-14 1.688” C11-20 KF CA020A99 KE CA020A80 KG CA020A98 KH CA020A98 KH CA020A80<br />
2 7/8” V11-225 3/4” 1.8024-14 2.188” C11-25 KF CA025A99 KE CA025A80 KG CA025A98 KH CA025A98 KH CA025A80<br />
3 1/2” V11-250 3/4” 2.1095-11.5 2.625” C11-30 KF CA030A99 KE CA030A80 KG CA030A98 KH CA030A98 KH CA030A80<br />
4 1/2” V11-375 1” 3.1715-11.5 3.625” C11-40 KF CA040A99 KE CA040A80 KG CA040A98 KH CA040A98 KH CA040A80<br />
CA020A99
Pump<br />
Bore<br />
Valve <strong>Rod</strong><br />
o/dia<br />
API top Plunger Cages<br />
Modified Line<br />
Pipe Box<br />
Box thread o/dia<br />
API<br />
number<br />
Steel<br />
Alloy +<br />
Stellite Lined<br />
Material <strong>and</strong> Part number<br />
Brass Stainless<br />
Stainless +<br />
Stellite Lined<br />
1.0625” 11/16” 3/8” 0.8750-14 1.036” C12-106 KF CA106B99 KE CA106B80 KG CA106B98 KH CA106B98 KE CA106B80<br />
1.250” 11/16” 3/8” 1.0000-14 1.200” C12-125 KF CA125B99 KE CA125B80 KG CA125B98 KH CA125B98 KE CA125B80<br />
1.500” 11/16” 3/8” 1.2500-14 1.450” C12-150-20 KF CA150B99 KE CA150B80 KG CA150B98 KH CA150B98 KE CA150B80<br />
1.500” 7/8” 1/2” 1.2500-14 1.450” C12-150-25 KF CA150X99 KE CA150X80 KG CA150X98 KH CA150X98 KE CA150X80<br />
1.750” 7/8” 1/2” 1.4704-14 1.700” C12-175 KF CA175B99 KE CA175B80 KG CA175B98 KH CA175B98 KE CA175B80<br />
2.000” 7/8” 1/2” 1.5604-14 1.950” C12-200 KF CA200B99 KE CA200B80 KG CA200B98 KH CA200B98 KE CA200B80<br />
2.250” 1 1/16” 3/4” 1.8024-14 2.200” C12-225 KF CA225B99 KE CA225B80 KG CA225B98 KH CA225B98 KE CA225B80<br />
2.500” 1 1/16” 3/4” 2.1095-11.5 2.450” C12-250 KF CA250B99 KE CA250B80 KG CA250B98 KH CA250B98 KE CA250B80<br />
CA150B99<br />
43<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
cages<br />
Pump<br />
Bore<br />
44<br />
API Closed Pin End Plunger Cages<br />
Valve Size upper Box Lower Box o/dia<br />
API<br />
number<br />
Steel<br />
Alloy +<br />
Stellite Lined<br />
Material <strong>and</strong> Part number<br />
Brass Stainless<br />
Stainless +<br />
Stellite Lined<br />
1.0625” V11-106 0.8750-14 0.8750-14 1.036” C13-106 KF CA106C99 KE CA106C80 KG CA106C98 KH CA106C98 KH CA106C80<br />
1.250” V11-125 1.000-14 1.000-14 1.200” C13-125 KF CA125C99 KE CA125C80 KG CA125C98 KH CA125C98 KH CA125C80<br />
1.500” V11-150 1.2500-14 1.2500-14 1.450” C13-150 KF CA150C99 KE CA150C80 KG CA150C98 KH CA150C98 KH CA150C80<br />
1.750” V11-175 1.4704-14 1.4704-14 1.700” C13-175 KF CA175C99 KE CA175C80 KG CA175C98 KH CA175C98 KH CA175C80<br />
2.000” V11-200 1.5604-14 1.5604-14 1.950” C13-200 KF CA200C99 KE CA200C80 KG CA200C98 KH CA200C98 KH CA200C80<br />
2.250” V11-225 1.8024-14 1.8024-14 2.200” C13-225 KF CA225C99 KE CA225C80 KG CA225C98 KH CA225C98 KH CA225C80<br />
2.500” V11-250 2.1095-11.5 2.1095-11.5 2.450” C13-250 KF CA250C99 KE CA250C80 KG CA250C98 KH CA250C98 KH CA250C80<br />
2.750” V11-250 2.1095-11.5 2.1095-11.5 2.650” C13-275 KF CA275C99 KE CA275C80 KG CA275C98 KH CA275C98 KH CA275C80<br />
3.750” V11-375 3.1715-11.5 3.1715-11.5 3.650” C13-375 KF CA375C99 KE CA375C80 KG CA375C98 KH CA375C98 KH CA375C80<br />
CA150C99
tubing<br />
Size<br />
API Closed Barrel Cages<br />
Valve Size Pin thread Box thread o/dia<br />
API<br />
number<br />
Steel<br />
Alloy +<br />
Stellite Lined<br />
Material <strong>and</strong> Part number<br />
Brass Stainless<br />
Stainless +<br />
Stellite Lined<br />
1.900” V11-150 1.3330-16 1.2500-14 1.440” C14-15 KF CA015D99 KE CA015D80 KG CA015D98 KH CA015D98 KH CA015D80<br />
2 3/8” V11-175 1.3330-16 1.4704-14 1.750” C14-20-125 KF CA020W99 KE CA020W80 KG CA020W98 KH CA020W98 KH CA020W80<br />
2 3/8” V11-175 1.5730-16 1.4704-14 1.750” C14-20 KF CA020D99 KE CA020D80 KG CA020D98 KH CA020D98 KH CA020D80<br />
2 7/8” V11-225 2.0870-16 1.8024-14 2.250” C14-25 KF CA025D99 KE CA025D80 KG CA025D98 KH CA025D98 KH CA025D80<br />
3 1/2” V11-250 2.5730-16 2.1095-11.5 2.750” C14-30 KF CA030D99 KE CA030D80 KG CA030D98 KH CA030D98 KH CA030D80<br />
CA020d99<br />
45<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
cages<br />
Pump<br />
Bore<br />
46<br />
API St<strong>and</strong>ing Valve Cages<br />
Valve Size Puller thread Box thread o/dia<br />
API<br />
number<br />
Steel<br />
Alloy +<br />
Stellite Lined<br />
Material <strong>and</strong> Part number<br />
Brass Stainless<br />
Stainless +<br />
Stellite Lined<br />
1.750” V11-175 0.750-10 1.4704-14 1.668” C16-175 KF CA175F99 KE CA175F80 KG CA175F98 KH CA175F98 KH CA175F80<br />
2.250” V11-225 0.750-10 1.8024-14 2.168” C16-225 KF CA225F99 KE CA225F80 KG CA225F98 KH CA225F98 KH CA225F80<br />
2.750” V11-250 0.750-10 2.1095-11.5 2.688” C16-275 KF CA275F99 KE CA275F80 KG CA275F98 KH CA275F98 KH CA275F80<br />
3.750” V11-375 0.750-10 3.1715-11.5 3.710” C16-375 KF CA375F99 KE CA375F80 KG CA375F98 KH CA375F98 KH CA375F80<br />
CA225F99
API top Plunger Cages (travelling Barrel)<br />
Pump<br />
Bore<br />
Valve Size Puller thread Box thread o/dia<br />
API<br />
number<br />
Steel<br />
Alloy +<br />
Stellite Lined<br />
Material <strong>and</strong> Part number<br />
Brass Stainless<br />
Stainless +<br />
Stellite Lined<br />
1.250” V11-125 TBC 1.000-14 1.200” C17-125 KF CA125G99 KE CA125G80 KG CA125G98 KH CA125G98 KH CA125G80<br />
1.500” V11-150 TBC 1.2500-14 1.450” C17-150 KF CA150G99 KE CA150G80 KG CA150G98 KH CA150G98 KH CA150G80<br />
2.000” V11-200 TBC 1.5604-14 1.950” C17-200 KF CA200G99 KE CA200G80 KG CA200G98 KH CA200G98 KH CA200G80<br />
2.500” V11-250 TBC 2.1095-11.5 2.450” C17-250 KF CA250G99 KE CA250G80 KG CA250G98 KH CA250G98 KH CA250G80<br />
CA150G99<br />
47<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
connectors<br />
48<br />
API upper Barrel Connectors<br />
tubing Size upper Pin Lower Pin Inside diameter API number Steel<br />
Material <strong>and</strong> Part number<br />
Alloy + Stellite<br />
Wear Ring<br />
Brass Stainless<br />
1.900” 1.2500-14 1.3330-16 0.938” C21-15 KF CN015A99 KE CN015A80 KG CN015A98 KH CN015A98<br />
2 3/8” 1.4704-14 1.3330-16 1.000” C21-20-125 KF CN020X99 KE CN020X80 KG CN020X98 KH CN020X98<br />
2 3/8” 1.4704-14 1.5730-16 1.000” C21-20 KF CN020A99 KE CN020A80 KG CN020A98 KH CN020A98<br />
2 7/8” 1.8024-14 2.0870-16 1.250” C21-25 KF CN025A99 KE CN025A80 KG CN025A98 KH CN025A98<br />
3 1/2” 2.1095-11.5 2.5730-16 1.500” C21-30 KF CN030A99 KE CN030A80 KG CN030A98 KH CN030A98<br />
Cn020A99
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
couplings<br />
50<br />
API Extension Couplings<br />
Pump Bore upper Box Lower Box o/dia<br />
Inside<br />
diameter<br />
Material <strong>and</strong> Part number<br />
API number Steel Brass Stainless<br />
1.0625” 1.3125-16 1.3330-16 1.450” 1.093” C31-106-15 KA CU106Y99* KG CU106Y98* KH CU106Y98*<br />
1.0625” 1.3125-16 1.5730-16 1.750” 1.093” C31-106 KA CU106A99* KG CU106A98* KH CU106A98*<br />
1.250” 1.5730-16 1.5730-16 1.750” 1.291” C31-125 KA CU125A99* KG CU125A98* KH CU125A98*<br />
1.500” 1.8750-16 2.0870-16 2.250” 1.572” C31-150 KA CU150A99* KG CU150A98* KH CU150A98*<br />
1.750” 2.0870-16 2.0870-16 2.250” 1.791” C31-175 KA CU175A99* KG CU175A98* KH CU175A98*<br />
2.250” 2.5730-16 2.5730-16 2.750” 2.291” C31-225 KA CU225A99* KG CU225A98* KH CU225A98*<br />
* Length to be specified in whole inches (API st<strong>and</strong>ard extension lengths are 6 inches to 48 inches in 6 inch increments).<br />
Example: 18” long, 1 1/2” pump bore, steel coupling extension = KA CU150A99018<br />
Cu150A99
API upper Pull tube Couplings<br />
Material <strong>and</strong> Part number<br />
Pump Bore upper Box Lower Box o/dia API number Steel Brass Stainless<br />
1.250” 1.0000-14 0.9375-16 1.188” C32-125 KF CU125B99 KG CU125B98 KH CU125B98<br />
1.500” 1.2500-14 1.1250-16 1.438” C32-150 KF CU150B99 KG CU150B98 KH CU150B98<br />
1.750” 1.4704-14 1.3125-16 1.700” C32-175 KF CU175B99 KG CU175B98 KH CU175B98<br />
2.000” 1.5604-14 1.5000-16 1.938” C32-200 KF CU200B99 KG CU200B98 KH CU200B98<br />
2.250” 1.8024-14 1.8750-16 2.200” C32-225 KF CU225B99 KG CU225B98 KH CU225B98<br />
2.500” 2.1095-11.5 1.8750-16 2.450” C32-250 KF CU250B99 KG CU250B98 KH CU250B98<br />
Cu150B99<br />
51<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
couplings<br />
52<br />
API Lower Pull tube Couplings<br />
Material <strong>and</strong> Part number<br />
Pump Bore upper Box Lower Box o/dia API number Steel Brass Stainless<br />
1.250” 0.9375-16 1.2500-14 1.440” C33-125-15 KF CU125X99 KG CU125X98 KH CU125X98<br />
1.250” 0.9375-16 1.4704-14 1.750” C33-125 KF CU125C99 KG CU125C98 KH CU125C98<br />
1.500” 1.1250-16 1.4704-14 1.750” C33-150-20 KF CU150C99 KG CU150C98 KH CU150C98<br />
1.500” 1.1250-16 1.8024-14 2.200” C33-150-25 KF CU150X99 KG CU150X98 KH CU150X98<br />
1.750” 1.3125-16 1.8024-14 2.200” C33-175 KF CU175C99 KG CU175C98 KH CU175C98<br />
2.000” 1.5000-16 1.8024-14 2.200” C33-200 KF CU200C99 KG CU200C98 KH CU200C98<br />
2.250” 1.8750-16 2.1095-11.5 2.700” C33-225 KF CU225C99 KG CU225C98 KH CU225C98<br />
Cu150C99
API tubing Couplings<br />
Material <strong>and</strong> Part number<br />
tubing Size EuE thread Reference o/dia API number Steel Brass Stainless<br />
1.900” 1.900-10 2.110” C34-15 KF CU015D99 KG CU015D98 KH CU015D98<br />
2 3/8” 2.375-8 3.062” C34-20 KF CU020D99 KG CU020D98 KH CU020D98<br />
2 7/8” 2.875-8 3.668” C34-25 KF CU025D99 KG CU025D98 KH CU025D98<br />
3 1/2” 3.500-8 4.500” C34-30 KF CU030D99 KG CU030D98 KH CU030D98<br />
4 1/2” 4.500-8 5.563” C34-40 KF CU040D99 KG CU040D98 KH CU040D98<br />
Cu025d99<br />
53<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
couplings<br />
54<br />
API Barrel Couplings<br />
Material <strong>and</strong> Part number<br />
tubing Size EuE thread Reference Barrel thread o/dia API number Steel Brass Stainless<br />
2 3/8” 2.375-8 2.2380-11.5 3.000” C35-20 KF CU020E99 KG CU020E98 KH CU020E98<br />
2 7/8” 2.875-8 2.7380-11.5 3.625” C35-25 KF CU025E99 KG CU025E98 KH CU025E98<br />
3 1/2” 3.500-8 3.2380-11.5 4.500” C35-30 KF CU030E99 KG CU030E98 KH CU030E98<br />
4 1/2” 4.500-8 4.2380-11.5 5.563” C35-40 KF CU040E99 KG CU040E98 KH CU040E98<br />
Cu020E99
API Lower Soft Packed Barrel Couplings<br />
Material <strong>and</strong> Part number<br />
tubing Size EuE thread Reference Barrel thread o/dia API number Steel Brass Stainless<br />
2 3/8” 2.375-8 178-11.5 3.000” C36-20 KF CU020F99 KG CU020F98 KH CU020F98<br />
2 7/8” 2.875-8 225-11.5 3.625” C36-25 KF CU025F99 KG CU025F98 KH CU025F98<br />
3 1/2” 3.500-8 275-11.5 4.500” C36-30 KF CU030F99 KG CU030F98 KH CU030F98<br />
Cu025F99<br />
55<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
couplings<br />
56<br />
API Soft Packed Barrel Couplings<br />
Material <strong>and</strong> Part number<br />
tubing Size EuE thread Reference Barrel thread o/dia API number Steel Brass Stainless<br />
2 3/8” 2.375-8 178-11.5 3.000” C37-20 KF CU020G99 KG CU020G98 KH CU020G98<br />
2 7/8” 2.875-8 225-11.5 3.625” C37-25 KF CU025G99 KG CU025G98 KH CU025G98<br />
3 1/2” 3.500-8 275-11.5 4.500” C37-30 KF CU030G99 KG CU030G98 KH CU030G98<br />
Cu025G99
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
guides<br />
tubing Size<br />
58<br />
Valve <strong>Rod</strong><br />
o/dia<br />
API Valve <strong>Rod</strong> Guides<br />
upper Fishneck<br />
o/dia<br />
Lower Fishneck<br />
o/dia<br />
Box thread API number Steel a<br />
Material <strong>and</strong> Part number<br />
Brass Stainless<br />
1.900” 11/16” 1.250” 1.125” 1.2500-14 G11-15 KA GU015A60 KG GU015A98 KH GU015A98<br />
2 3/8” 11/16” 1.500” 1.375” 1.4704-14 G11-20 KA GU020A60 KG GU020A98 KH GU020A98<br />
2 7/8” 7/8” 1.625” 1.500” 1.8024-14 G11-25 KA GU025A60 KG GU025A98 KH GU025A98<br />
3 1/2” 1 1/16” 1.625” 1.500” 2.1095-11.5 G11-30 KA GU030A60 KG GU030A98 KH GU030A98<br />
a Steel valve rod guides have an induction hardened neck <strong>and</strong> clutch<br />
Gu020A60
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
seating nipples<br />
60<br />
API Cup type (Insert Pump) Seating nipples<br />
Material <strong>and</strong> Part number<br />
tubing Size EuE thread Reference Inside diameter (+0.010/-0.000”) API number Steel Stainless<br />
1.900” 1.900-10 1.460” N11-15 KF SN015A99* KH SN015A98*<br />
2 3/8” 2.375-8 1.780” N11-20 KF SN020A99* KH SN020A98*<br />
2 7/8” 2.875-8 2.280” N11-25 KF SN025A99* KH SN025A98*<br />
3 1/2” 3.500-8 2.780” N11-30 KF SN030A99* KH SN030A98*<br />
* Seating Nipple length to be specified in whole inches (St<strong>and</strong>ard seating nipple length is 12 inch, however 8 inch, 18 inch <strong>and</strong> 36 inch are also available).<br />
Example: 12” long, 2 7/8” tubing size, steel cup type (insert pump) seating nipple = KF SN025A99012<br />
Sn025A99
API Bottom Mechanical Seating nipples<br />
Material <strong>and</strong> Part number<br />
tubing Size EuE thread Reference Line Pipe thread API number Steel Stainless<br />
1.900” 1.900-10 1” N12-15 KF SN015B99 KH SN015B98<br />
2 3/8” 2.375-8 1 1/2” N12-20 KF SN020B99 KH SN020B98<br />
2 7/8” 2.875-8 2” N12-25 KF SN025B99 KH SN025B98<br />
3 1/2” 3.500-8 2 1/2” N12-30 KF SN030B99 KH SN030B98<br />
4 1/2” 4.500-8 3” N12-40 KF SN040B99 KH SN040B98<br />
Sn025B99<br />
61<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
seating nipples<br />
62<br />
API Cup type (tubing Pump) Seating nipples<br />
tubing Size EuE thread Reference<br />
Line Pipe<br />
thread<br />
Inside diameter<br />
(+0.010/-0.000”)<br />
Material <strong>and</strong> Part number<br />
API number Steel Stainless<br />
2 3/8” 2.375-8 1 1/2” 1.710” N13-20 KF SN020C99 KH SN020C98<br />
2 7/8” 2.875-8 2” 2.210” N13-25 KF SN025C99 KH SN025C98<br />
3 1/2” 3.500-8 2” 2.710” N13-30 KF SN030C99 KH SN030C98<br />
Sn025C99
API top Mechanical Seating nipples<br />
tubing Size EuE thread Reference o/dia<br />
Seal Ring Inside diameter<br />
(+0.010/-0.000”)<br />
API Assembly<br />
number<br />
Material <strong>and</strong> Assembly number<br />
Steel Stainless<br />
2 3/8” 2.375-8 3.000” 1.780” N12-20 SN020D99 SN020D98<br />
2 7/8” 2.875-8 3.625” 2.280” N12-25 SN025D99 SN025D98<br />
3 1/2” 3.500-8 4.500” 2.780” N12-30 SN030D99 SN030D98<br />
Item<br />
number<br />
Component Parts<br />
Material <strong>and</strong> Part number<br />
2 3/8” 2 7/8” 3 1/2”<br />
description Quantity Sn020d99 Sn020d98 Sn025d99 Sn025d98 Sn030d99 Sn030d98<br />
1 Upper Collar 1 KF SN020X99 KH SN020X98 KF SN025X99 KH SN025X98 KF SN030X99 KH SN030X98<br />
2 Seal Ring (Hardened Stainless Steel) 1 KC SN020Y30 KC SN020Y30 KC SN025Y30 KC SN025Y30 KC SN030Y30 KC SN030Y30<br />
3 Lower Shell 1 KF SN020Z99 KH SN020Z98 KF SN025Z99 KH SN025Z98 KF SN030Z99 KH SN030Z98<br />
Sn025d99<br />
63<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
nipple extensions<br />
64<br />
API upper nipple Extensions<br />
Material <strong>and</strong> Part number<br />
tubing Size EuE thread Reference Inside diameter API number Steel Stainless<br />
2 3/8” 2.375-8 2.000” N21-20 KA NE020A99* KH NE020A98*<br />
2 7/8” 2.875-8 2.450” N21-25 KA NE025A99* KH NE025A98*<br />
3 1/2” 3.500-8 2.950” N21-30 KA NE030A99* KH NE030A98*<br />
4 1/2” 4.500-8 3.920” N21-40 KA NE040A99* KH NE040A98*<br />
* Extension length to be specified in whole inches (St<strong>and</strong>ard extension lengths are 12 inches to 48 inches in 12 inch increments).<br />
Example: 24” long, 2 7/8” tubing size, steel upper extension nipple = KA NE025A99024<br />
nE025A99
API Lower nipple Extensions<br />
Material <strong>and</strong> Part number<br />
tubing Size EuE thread Reference Inside diameter API number Steel Stainless<br />
2 3/8” 2.375-8 2.000” N22-20 KA NE020B99* KH NE020B98*<br />
2 7/8” 2.875-8 2.450” N22-25 KA NE025B99* KH NE025B98*<br />
3 1/2” 3.500-8 2.950” N22-30 KA NE030B99* KH NE030B98*<br />
4 1/2” 4.500-8 3.920” N22-40 KA NE040B99* KH NE040B98*<br />
* Extension length to be specified in whole inches (St<strong>and</strong>ard extension lengths are 12 inches to 48 inches in 12 inch increments).<br />
Example: 24” long, 2 7/8” tubing size, steel lower extension nipple = KA NE025B99024<br />
nE025B99<br />
65<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
plugs<br />
66<br />
API Pull Plugs<br />
Pump Bore Pin thread Inside diameter o/dia API number Steel<br />
Material <strong>and</strong> Part number<br />
Alloy + Stellite<br />
Wear Ring<br />
Brass Stainless<br />
1.250” 1.3330-16 1.000” 1.500” P11-125-15 KF PG125A99 KE PG125A80 KG PG125A98 KH PG125A98<br />
1.250” 1.5730-16 1.000” 1.750” P11-125 KF PG125X99 KE PG125X80 KG PG125X98 KH PG125X98<br />
1.500” 1.5730-16 1.188” 1.750” P11-150-20 KF PG150X99 KE PG150X80 KG PG150X98 KH PG150X98<br />
1.500” 2.0870-16 1.188” 2.250” P11-150-25 KF PG150Y99 KE PG150Y80 KG PG150Y98 KH PG150Y98<br />
1.750” 2.0870-16 1.375” 2.250” P11-175 KF PG175X99 KE PG175X80 KG PG175X98 KH PG175X98<br />
2.000” 2.0870-16 1.562” 2.250” P11-200 KF PG200X99 KE PG200X80 KG PG200X98 KH PG200X98<br />
2.250” 2.5730-16 1.937” 2.750” P11-225 KF PG225X99 KE PG225X80 KG PG225X98 KH PG225X98<br />
PG150X99
API Seat Plugs<br />
Material <strong>and</strong> Part number<br />
Pump Bore Pin thread o/dia API number Steel Brass Stainless<br />
1.0625” 0.8750-14 1.000” P12-106 KF PG106B99 KG PG106B98 KH PG106B98<br />
1.250” 1.0000-14 1.188” P12-125 KF PG125B99 KG PG125B98 KH PG125B98<br />
1.500” 1.2500-14 1.438” P12-150 KF PG150B99 KG PG150B98 KH PG150B98<br />
1.750” 1.4704-14 1.688” P12-175 KF PG175B99 KG PG175B98 KH PG175B98<br />
2.000” 1.5604-14 1.938” P12-200 KF PG200B99 KG PG200B98 KH PG200B98<br />
2.250” 1.8024-14 2.188” P12-225 KF PG225B99 KG PG225B98 KH PG225B98<br />
2.500” 2.1095-11.5 2.438” P12-250 KF PG250B99 KG PG250B98 KH PG250B98<br />
PG150B99<br />
67<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
plungers<br />
68<br />
API one Piece Pin Plungers<br />
Coating <strong>and</strong> Part number<br />
Pump Bore thread Reference API number Spray Metal Chrome<br />
1.0625” 0.8750-14 P21-106 KL PN106A70*# KL PN106A11*#<br />
1.250” 1.0000-14 P21-125 KL PN125A70*# KL PN125A11*#<br />
1.500” 1.2500-14 P21-150 KL PN150A70*# KL PN150A11*#<br />
1.750” 1.4704-14 P21-175 KL PN175A70*# KL PN175A11*#<br />
2.000” 1.5604-14 P21-200 KL PN200A70*# KL PN200A11*#<br />
2.250” 1.8024-14 P21-225 KL PN225A70*# KL PN225A11*#<br />
2.500” 2.1095-11.5 P21-250 KL PN250A70*# KL PN250A11*#<br />
2.750” 2.1095-11.5 P21-275 KL PN275A70*# KL PN275A11*#<br />
3.750” 3.1715-11.5 P21-375 KL PN375A70*# KL PN375A11*#<br />
API one Piece Grooved Pin Plungers<br />
Coating <strong>and</strong> Part number<br />
Pump Bore thread Reference API number Spray Metal Chrome<br />
1.0625” 0.8750-14 P21-106 KL PN106E70*# KL PN106E11*#<br />
1.250” 1.0000-14 P21-125 KL PN125E70*# KL PN125E11*#<br />
1.500” 1.2500-14 P21-150 KL PN150E70*# KL PN150E11*#<br />
1.750” 1.4704-14 P21-175 KL PN175E70*# KL PN175E11*#<br />
2.000” 1.5604-14 P21-200 KL PN200E70*# KL PN200E11*#<br />
2.250” 1.8024-14 P21-225 KL PN225E70*# KL PN225E11*#<br />
2.500” 2.1095-11.5 P21-250 KL PN250E70*# KL PN250E11*#<br />
2.750” 2.1095-11.5 P21-275 KL PN275E70*# KL PN275E11*#<br />
3.750” 3.1715-11.5 P21-375 KL PN375E70*# KL PN375E11*#<br />
API Assembled Pin Plungers<br />
Pump Bore thread Reference API number<br />
Coating <strong>and</strong> Part number<br />
Spray Metal + nCA<br />
(Monel) Ends<br />
1.250” 1.0000-14 P22-125 PN125B70*#<br />
1.500” 1.2500-14 P22-150 PN150B70*#<br />
1.750” 1.4704-14 P22-175 PN175B70*#<br />
2.000” 1.5604-14 P22-200 PN200B70*#<br />
2.250” 1.8024-14 P22-225 PN225B70*#<br />
2.500” 2.1095-11.5 P22-250 PN250B70*#<br />
2.750” 2.1095-11.5 P22-275 PN275B70*#<br />
* Plunger length to be specified in whole inches (API St<strong>and</strong>ard plunger lengths are 2 feet to 8 feet in 1 foot increments. 060 for 60 inches).<br />
# Clearance (fit) to be specified in thous<strong>and</strong>ths of an inch (D for a Pump Bore -0.003 inches).<br />
Example: 5 foot long (60 inches), 1 1/2” pump bore, one piece pin plunger with spray metal, -0.003” fit = KL PN150A70060D.<br />
Select appropriate plunger clearance (fit)<br />
using table below<br />
Plunger diameter<br />
Coding Letter<br />
(+0.0000/-0.0005”)<br />
B Pump Bore - 0.001"<br />
C Pump Bore - 0.002"<br />
D Pump Bore - 0.003"<br />
E Pump Bore - 0.004"<br />
F Pump Bore - 0.005"<br />
G Pump Bore - 0.006"<br />
H Pump Bore - 0.007"<br />
J Pump Bore - 0.008"<br />
K Pump Bore - 0.009"<br />
L Pump Bore - 0.010"
API one Piece<br />
Pin Plungers<br />
API one Piece<br />
Grooved Pin Plungers<br />
API Assembled<br />
Pin Plungers<br />
Pn150A70 Pn150E70<br />
Pn125B70<br />
69<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
plungers<br />
API Soft Packed (Pressure Actuated) Plungers<br />
70<br />
Assembly Part number<br />
Pump Bore thread Reference API number 1 ft (20 ring) 2 ft (40 ring) 3 ft (60 ring) 4 ft (80 ring)<br />
1.250” 1.0000-14 P24-125 PN125H70012* PN125H70024* PN125H70036* PN125H70048*<br />
1.500” 1.2500-14 P24-150 PN150H70012* PN150H70024* PN150H70036* PN150H70048*<br />
1.7813” 1.4704-14 P24-178 PN178H70012* PN178H70024* PN178H70036* PN178H70048*<br />
2.000” 1.5604-14 P24-200 PN200H70012* PN200H70024* PN200H70036* PN200H70048*<br />
2.250” 1.8024-14 P24-225 PN225H70012* PN225H70024* PN225H70036* PN225H70048*<br />
2.500” 2.1095-11.5 P24-250 PN250H70012* PN250H70024* PN250H70036* PN250H70048*<br />
2.750” 2.1095-11.5 P24-275 PN275H70012* PN275H70024* PN275H70036* PN275H70048*<br />
Component Parts<br />
Actual Plunger Length: 15" 27" 39" 51"<br />
Component Part number<br />
Pump Bore thread Reference API number 1 ft (20 ring) 2 ft (40 ring) 3 ft (60 ring) 4 ft (80 ring)<br />
1.250”<br />
1.500”<br />
1.7813”<br />
2.000”<br />
2.250”<br />
2.500”<br />
2.750”<br />
1 Plunger Body (Spray Metal) KL PN125F70012* KL PN125F70024* KL PN125F70036* KL PN125F70048*<br />
2 Plunger Ring (Nylon) KJ PN125G98 KJ PN125G98 KJ PN125G98 KJ PN125G98<br />
1 Plunger Body (Spray Metal) KL PN150F70012* KL PN150F70024* KL PN150F70036* KL PN150F70048*<br />
2 Plunger Ring (Nylon) KJ PN150G98 KJ PN150G98 KJ PN150G98 KJ PN150G98<br />
1 Plunger Body (Spray Metal) KL PN178F70012* KL PN178F70024* KL PN178F70036* KL PN178F70048*<br />
2 Plunger Ring (Nylon) KJ PN178G98 KJ PN178G98 KJ PN178G98 KJ PN178G98<br />
1 Plunger Body (Spray Metal) KL PN200F70012* KL PN200F70024* KL PN200F70036* KL PN200F70048*<br />
2 Plunger Ring (Nylon) KJ PN200G98 KJ PN200G98 KJ PN200G98 KJ PN200G98<br />
1 Plunger Body (Spray Metal) KL PN225F70012* KL PN225F70024* KL PN225F70036* KL PN225F70048*<br />
2 Plunger Ring (Nylon) KJ PN225G98 KJ PN225G98 KJ PN225G98 KJ PN225G98<br />
1 Plunger Body (Spray Metal) KL PN250F70012* KL PN250F70024* KL PN250F70036* KL PN250F70048*<br />
2 Plunger Ring (Nylon) KJ PN250G98 KJ PN250G98 KJ PN250G98 KJ PN250G98<br />
1 Plunger Body (Spray Metal) KL PN275F70012* KL PN275F70024* KL PN275F70036* KL PN275F70048*<br />
2 Plunger Ring (Nylon) KJ PN275G98 KJ PN275G98 KJ PN275G98 KJ PN275G98<br />
Select appropriate plunger clearance (fit) using table below<br />
Coding Letter<br />
Actual Plunger Length: 15" 27" 39" 51"<br />
Plunger diameter<br />
(+0.0000/-0.0005”)<br />
B Pump Bore - 0.001"<br />
C Pump Bore - 0.002"<br />
D Pump Bore - 0.003"<br />
E Pump Bore - 0.004"<br />
F Pump Bore - 0.005"<br />
G Pump Bore - 0.006"<br />
H Pump Bore - 0.007"<br />
J Pump Bore - 0.008"<br />
K Pump Bore - 0.009"<br />
L Pump Bore - 0.010"<br />
* Clearance (fit) to be specified in thous<strong>and</strong>ths of an inch (D for a Pump Bore -0.003 inches).<br />
Example: 2 foot long (40 Ring), 1 1/2” pump bore, soft packed (pressure actuated) plunger with<br />
spray metal, -0.003” fit = PN150H70024D
API Soft Packed (Pressure Actuated) Plungers <strong>Components</strong><br />
Pn150G98<br />
Pn150F70<br />
71<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
pullers<br />
72<br />
API tap type St<strong>and</strong>ing Valve Puller Assemblies<br />
Pump Bore upper Pin thread Lower Pin o/dia<br />
API Assembly<br />
number<br />
Material <strong>and</strong> Assembly number<br />
Steel Brass Stainless<br />
1.750” 1.4704-14 0.750-10 1.688” P31-175 PU175E99 PU175E97 PU175E98<br />
2.250” 1.8024-14 0.750-10 2.188” P31-225 PU225E99 PU225E97 PU225E98<br />
2.750” 2.1095-11.5 0.750-10 2.625” P31-275 PU275E99 PU275E97 PU275E98<br />
3.750” 3.1715-11.5 0.750-10 3.650” P31-375 PU375E99 PU375E97 PU375E98<br />
Component Parts<br />
Component Part numbers<br />
Pump Bore Item number description Quantity Steel Brass Stainless<br />
1.750”<br />
2.250”<br />
2.750”<br />
3.750”<br />
1 Body 1 KE PU175A99 KG PU175A98 KH PU175A98<br />
2 Housing 1 KE PU225C99 KG PU225C98 KH PU225C98<br />
3 Spring (Stainless Steel) 1 PU225B99 PU225B99 PU225B99<br />
4 Tap (Nitrided Alloy Steel) 1 KE PU225D30 KE PU225D30 KE PU225D30<br />
1 Body 1 KE PU225A99 KG PU225A98 KH PU225A98<br />
2 Housing 1 KE PU225C99 KG PU225C98 KH PU225C98<br />
3 Spring (Stainless Steel) 1 PU225B99 PU225B99 PU225B99<br />
4 Tap (Nitrided Alloy Steel) 1 KE PU225D30 KE PU225D30 KE PU225D30<br />
1 Body 1 KE PU275A99 KG PU275A98 KH PU275A98<br />
2 Housing 1 KE PU225C99 KG PU225C98 KH PU225C98<br />
3 Spring (Stainless Steel) 1 PU225B99 PU225B99 PU225B99<br />
4 Tap (Nitrided Alloy Steel) 1 KE PU225D30 KE PU225D30 KE PU225D30<br />
1 Body 1 KE PU275A99 KG PU275A98 KH PU275A98<br />
2 Housing 1 KE PU225C99 KG PU225C98 KH PU225C98<br />
3 Spring (Stainless Steel) 1 PU225B99 PU225B99 PU225B99<br />
4 Tap (Nitrided Alloy Steel) 1 KE PU225D30 KE PU225D30 KE PU225D30<br />
5 Adaptor Bushing 1 KF BU040D99 KG BU040D98 KH BU040D98<br />
All springs are stainless steel, all taps are nitrided alloy steel.
API tap type St<strong>and</strong>ing Valve Puller Assemblies <strong>Components</strong><br />
Pu225A99<br />
Pu225B99<br />
Pu225d30<br />
Pu225C99<br />
73<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
valve rods<br />
nominal Barrel Length*<br />
Minus nominal<br />
Plunger Length<br />
74<br />
API Valve <strong>Rod</strong>s<br />
Valve <strong>Rod</strong> Length in Whole Inches<br />
Material <strong>and</strong> Part number<br />
tubing Size Modified Line Pipe Thread o/dia API number Steel Steel + Spray Metal<br />
2 3/8” 3/8” 11/16” R11-20 KF RV020A99* KF RV020A70*<br />
2 7/8” 1/2” 7/8” R11-25 KF RV025A99* KF RV025A70*<br />
3 1/2” 3/4” 1 1/16” R11-30 KF RV030A99* KF RV030A70*<br />
* Valve <strong>Rod</strong> length in whole inches (see table below for valve rod length selection)<br />
For <strong>Pumps</strong> Installed in 1.900”, 2 3/8” <strong>and</strong> 2 7/8” tubing For <strong>Pumps</strong> Installed in 3 1/2” tubing<br />
top Anchor Bottom Anchor top Anchor Bottom Anchor<br />
1 013 007 012 006<br />
2 025 019 024 018<br />
3 037 031 036 030<br />
4 049 043 048 042<br />
5 061 055 060 054<br />
6 073 067 072 066<br />
7 085 079 084 078<br />
8 097 091 096 090<br />
9 109 103 108 102<br />
10 121 115 120 114<br />
11 133 127 132 126<br />
12 145 139 144 138<br />
13 157 151 156 150<br />
14 169 163 168 162<br />
15 181 175 180 174<br />
16 193 187 192 186<br />
17 205 199 204 198<br />
18 217 211 216 210<br />
19 229 223 228 222<br />
20 241 235 240 234<br />
21 253 247 252 246<br />
22 265 259 264 258<br />
23 277 271 276 270<br />
24 289 283 288 282<br />
25 301 295 300 294<br />
26 313 307 312 306<br />
27 325 319 324 318<br />
28 337 331 336 330<br />
29 349 343 348 342<br />
30 361 355 360 354<br />
*Including any extensions on heavy wall (RH) Barrels.<br />
Example: 7/8” diameter, steel valve rod, For use in 25-150 RHAC 16-6-2-2 = KF RV025A99169
API Valve <strong>Rod</strong>s<br />
RV020A99<br />
75<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
seating assemblies - friction<br />
76<br />
API top Cup Seating Assemblies<br />
Material <strong>and</strong> Assembly number<br />
tubing Size upper Pin thread Lower Pin thread o/dia Steel Brass Stainless<br />
2 3/8” 1.4704-14 1.5730-16 1.875” SC020K99 SC020K97 SC020K98<br />
2 7/8” 1.8024-14 2.0870-16 2.340” SC025K99 SC025K97 SC025K98<br />
3 1/2” 2.1095-11.5 2.5730-16 2.840” SC030K99 SC030K97 SC030K98<br />
Component Parts<br />
Component Part numbers<br />
tubing Size Item number description API number Quantity Steel Brass Stainless<br />
2 3/8”<br />
2 7/8”<br />
3 1/2”<br />
1 Select material prefix, see below<br />
Cup Material Prefix KJ = Nylon (Hard)<br />
KK = Composite (Hard)<br />
1 M<strong>and</strong>rel, Cup (Type HR) S11-20 1 KF SC020A99 KG SC020A98 KH SC020A98<br />
2 Seating Cup (Type HR) 1 S12-20 3 CS178H117A CS178H117A CS178H117A<br />
3 Seating Cup Ring (Type HR) S13-20 2 KF SC020C99 KG SC020C98 KH SC020C98<br />
4 Seating Cup Nut (Type HR) S14-20 1 KF SC020D99 KG SC020D98 KH SC020D98<br />
5 Seating Cup Bushing (Type HR) S15-20 1 KF SC020E99 KG SC020E98 KH SC020E98<br />
1 M<strong>and</strong>rel, Cup (Type HR) S11-25 1 KF SC025A99 KG SC025A98 KH SC025A98<br />
2 Seating Cup (Type HR) 1 S12-25 3 CS225L156A CS225L156A CS225L156A<br />
3 Seating Cup Ring (Type HR) S13-25 2 KF SC025C99 KG SC025C98 KH SC025C98<br />
4 Seating Cup Nut (Type HR) S14-25 1 KF SC025D99 KG SC025D98 KH SC025D98<br />
5 Seating Cup Bushing (Type HR) S15-25 1 KF SC025E99 KG SC025E98 KH SC025E98<br />
1 M<strong>and</strong>rel, Cup (Type HR) S11-30 1 KF SC030A99 KG SC030A98 KH SC030A98<br />
2 Seating Cup (Type HR) 1 S12-30 3 CS275L200A CS275L200A CS275L200A<br />
3 Seating Cup Ring (Type HR) S13-30 2 KF SC030C99 KG SC030C98 KH SC030C98<br />
4 Seating Cup Nut (Type HR) S14-30 1 KF SC030D99 KG SC030D98 KH SC030D98<br />
5 Seating Cup Bushing (Type HR) S15-30 1 KF SC030E99 KG SC030E98 KH SC030E98
API top Cup Seating Assembly<br />
SC025K99<br />
77<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
seating assemblies - friction<br />
78<br />
API Bottom Cup Seating Assemblies<br />
Material <strong>and</strong> Assembly number<br />
tubing Size upper Pin thread Lower Line Pipe Box o/dia Steel Brass Stainless<br />
1.900” 2 1.2500-14 3/4” 1.510” SC015Z99 SC015Z97 SC015Z98<br />
2 3/8” 1.4704-14 1” 1.875” SC020L99 SC020L97 SC020L98<br />
2 7/8” 1.8024-14 1 1/4” 2.340” SC025L99 SC025L97 SC025L98<br />
3 1/2” 2.1095-11.5 1 1/2” 2.840” SC030L99 SC030L97 SC030L98<br />
Component Parts<br />
Component Part numbers<br />
tubing Size Item number description API number Quantity Steel Brass Stainless<br />
1.900”<br />
2 3/8”<br />
2 7/8”<br />
3 1/2”<br />
2 1.900” Hold down is Type-O configuration<br />
3 Select material prefix, see below<br />
Cup Material Prefix KJ = Nylon (Hard)<br />
KK = Composite (Hard)<br />
1 M<strong>and</strong>rel, Cup (Type O) S31-15 1 KF SC015M99 KG SC015M98 KH SC015M98<br />
2 Seating Cup (Type O) 3 S32-15 3 CS150X118B CS150X118B CS150X118B<br />
3 Seating Cup Ring (Type O) S33-15 2 KF SC015P99 KG SC015P98 KH SC015P98<br />
4 Seating Cup Nut (Type O) S34-15 1 KF SC015Q99 KG SC015Q98 KH SC015Q98<br />
5 Seating Cup Coupling (Type HR) S16-15 1 KF SC015F99 KG SC015F98 KH SC015F98<br />
1 M<strong>and</strong>rel, Cup (Type HR) S11-20 1 KF SC020A99 KG SC020A98 KH SC020A98<br />
2 Seating Cup (Type HR) 3 S12-20 3 CS178H117A CS178H117A CS178H117A<br />
3 Seating Cup Ring (Type HR) S13-20 2 KF SC020C99 KG SC020C98 KH SC020C98<br />
4 Seating Cup Nut (Type HR) S14-20 1 KF SC020D99 KG SC020D98 KH SC020D98<br />
5 Seating Cup Coupling (Type HR) S16-20 1 KF SC020F99 KG SC020F98 KH SC020F98<br />
1 M<strong>and</strong>rel, Cup (Type HR) S11-25 1 KF SC025A99 KG SC025A98 KH SC025A98<br />
2 Seating Cup (Type HR) 3 S12-25 3 CS225L156A CS225L156A CS225L156A<br />
3 Seating Cup Ring (Type HR) S13-25 2 KF SC025C99 KG SC025C98 KH SC025C98<br />
4 Seating Cup Nut (Type HR) S14-25 1 KF SC025D99 KG SC025D98 KH SC025D98<br />
5 Seating Cup Coupling (Type HR) S16-25 1 KF SC025F99 KG SC025F98 KH SC025F98<br />
1 M<strong>and</strong>rel, Cup (Type HR) S11-30 1 KF SC030A99 KG SC030A98 KH SC030A98<br />
2 Seating Cup (Type HR) 3 S12-30 3 CS275L200A CS275L200A CS275L200A<br />
3 Seating Cup Ring (Type HR) S13-30 2 KF SC030C99 KG SC030C98 KH SC030C98<br />
4 Seating Cup Nut (Type HR) S14-30 1 KF SC030D99 KG SC030D98 KH SC030D98<br />
5 Seating Cup Coupling (Type HR) S16-30 1 KF SC030F99 KG SC030F98 KH SC030F98
API Bottom Cup Seating Assembly<br />
SC025L99<br />
79<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
seating assemblies - friction<br />
API 2 Cup Seating Assemblies - tubing <strong>Pumps</strong><br />
80<br />
Material <strong>and</strong> Assembly number<br />
tubing Size upper Pin thread Lower Pin Pipe Box o/dia Steel Brass Stainless<br />
2 3/8” 1.4704-14 1” 1.687” SC020V99 SC020V97 SC020V98<br />
2 7/8” 1.8024-14 1 1/4” 2.187” SC025V99 SC025V97 SC025V98<br />
3 1/2” 2.1095-11.5 1 1/2” 2.687” SC030V99 SC030V97 SC030V98<br />
Component Parts<br />
Component Part numbers<br />
tubing Size Item number description API number Quantity Steel Brass Stainless<br />
2 3/8”<br />
2 7/8”<br />
3 1/2”<br />
1 Select material prefix, see below<br />
Cup Material Prefix KJ = Nylon (Hard)<br />
KK = Composite (Hard)<br />
1 M<strong>and</strong>rel, Cup (Type HR - Tubing) S17-20 1 KF SC020G99 KG SC020G98 KH SC020G98<br />
2 Seating Cup (Type HR - Tubing) 1 S18-20 2 CS171H117A CS171H117A CS171H117A<br />
3 Seating Cup Ring (Type HR) S13-20 1 KF SC020C99 KG SC020C98 KH SC020C98<br />
4 Seating Cup Nut (Type HR) S14-20 1 KF SC020D99 KG SC020D98 KH SC020D98<br />
5 Seating Cup Coupling (Type HR) S16-20 1 KF SC020F99 KG SC020F98 KH SC020F98<br />
1 M<strong>and</strong>rel, Cup (Type HR - Tubing) S17-25 1 KF SC025G99 KG SC025G98 KH SC025G98<br />
2 Seating Cup (Type HR - Tubing) 1 S18-25 2 CS221H156A CS221H156A CS221H156A<br />
3 Seating Cup Ring (Type HR) S13-25 1 KF SC025C99 KG SC025C98 KH SC025C98<br />
4 Seating Cup Nut (Type HR) S14-25 1 KF SC025D99 KG SC025D98 KH SC025D98<br />
5 Seating Cup Coupling (Type HR) S16-25 1 KF SC025F99 KG SC025F98 KH SC025F98<br />
1 M<strong>and</strong>rel, Cup (Type HR - Tubing) S17-30 1 KF SC030G99 KG SC030G98 KH SC030G98<br />
2 Seating Cup (Type HR - Tubing) 1 S18-30 2 CS271H200A CS271H200A CS271H200A<br />
3 Seating Cup Ring (Type HR) S13-30 1 KF SC030C99 KG SC030C98 KH SC030C98<br />
4 Seating Cup Nut (Type HR) S14-30 1 KF SC030D99 KG SC030D98 KH SC030D98<br />
5 Seating Cup Coupling (Type HR) S16-30 1 KF SC030F99 KG SC030F98 KH SC030F98
API 2 Cup Seating Assembly - tubing <strong>Pumps</strong><br />
Cage <strong>and</strong> valve shown for reference only - not included with<br />
assembly. See pages 28 <strong>and</strong> 29 for details of these items.<br />
81<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
seating assemblies - mechanical<br />
82<br />
API top Mechanical Seating Assemblies<br />
Material <strong>and</strong> Assembly number<br />
tubing Size upper Pin thread Lower Pin thread API number Steel Brass Stainless<br />
2 3/8” 1.4704-14 1.5730-16 S21-20 SM020F99 SM020F97 SM020F98<br />
2 7/8” 1.8024-14 2.0870-16 S21-25 SM025F99 SM025F97 SM025F98<br />
3 1/2” 2.1095-11.5 2.5730-16 S21-30 SM030F99 SM030F97 SM030F98<br />
Component Parts<br />
Component Part numbers<br />
tubing Size Item number description Quantity Steel Brass Stainless<br />
2 3/8”<br />
2 7/8”<br />
3 1/2”<br />
1 Seating Ring (Hardened Stainless Steel) 1 KC SM020B30 KC SM020B30 KC SM020B30<br />
2 Seating M<strong>and</strong>rel 1 KF SM020A99 KG SM020A98 KH SM020A98<br />
3 Lock (Nitrided Alloy Steel) 1 KE SM020C32 KE SM020C32 KE SM020C32<br />
4 Bushing 1 KF SM020D99 KG SM020D98 KH SM020D98<br />
1 Seating Ring (Hardened Stainless Steel) 1 KC SM025B30 KC SM025B30 KC SM025B30<br />
2 Seating M<strong>and</strong>rel 1 KF SM025A99 KG SM025A98 KH SM025A98<br />
3 Lock (Nitrided Alloy Steel) 1 KE SM025C32 KE SM025C32 KE SM025C32<br />
4 Bushing 1 KF SM025D99 KG SM025D98 KH SM025D98<br />
1 Seating Ring (Hardened Stainless Steel) 1 KC SM030B30 KC SM030B30 KC SM030B30<br />
2 Seating M<strong>and</strong>rel 1 KF SM030A99 KG SM030A98 KH SM030A98<br />
3 Lock (Nitrided Alloy Steel) 1 KE SM030C32 KE SM030C32 KE SM030C32<br />
4 Bushing 1 KF SM030D99 KG SM030D98 KH SM030D98<br />
All seating rings are hardened stainless steel, all locks are nitrided alloy steel.
API top Mechanical Seating Assembly<br />
SM025F99<br />
83<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
seating assemblies - mechanical<br />
84<br />
API Bottom Mechanical Seating Assemblies<br />
Material <strong>and</strong> Assembly number<br />
tubing Size upper Pin thread Lower Pin thread o/dia Steel Brass Stainless<br />
1.900” 1.2500-14 S22-15 1.475” SM015K99 SM015K97 SM015K98<br />
2 3/8” 1.4704-14 S22-20 1.688” SM020K99 SM020K97 SM020K98<br />
2 7/8” 1.8024-14 S22-25 2.188” SM025K99 SM025K97 SM025K98<br />
3 1/2” 2.1095-11.5 S22-30 2.688” SM030K99 SM030K97 SM030K98<br />
4 1/2” 3.1715-11.5 S22-40 3.656” SM040K99 SM040K97 SM040K98<br />
Component Parts<br />
Component Part numbers<br />
tubing Size Item number description Quantity Steel Brass Stainless<br />
1.900”<br />
2 3/8”<br />
2 7/8”<br />
3 1/2”<br />
4 1/2”<br />
1 Bushing 1 KF SM015G99 KG SM015G98 KH SM015G98<br />
2 Seating Ring (Brass) 1 KG SM015H98 KG SM015H98 KG SM015H98<br />
3 Lock (Nitrided Alloy Steel) 1 KE SM015J32 KE SM015J32 KE SM015J32<br />
1 Bushing 1 KF SM020G99 KG SM020G98 KH SM020G98<br />
2 Seating Ring (Brass) 1 KG SM020H98 KG SM020H98 KG SM020H98<br />
3 Lock (Nitrided Alloy Steel) 1 KE SM020J32 KE SM020J32 KE SM020J32<br />
1 Bushing 1 KF SM025G99 KG SM025G98 KH SM025G98<br />
2 Seating Ring (Brass) 1 KG SM025H98 KG SM025H98 KG SM025H98<br />
3 Lock (Nitrided Alloy Steel) 1 KE SM025J32 KE SM025J32 KE SM025J32<br />
1 Bushing 1 KF SM030G99 KG SM030G98 KH SM030G98<br />
2 Seating Ring (Brass) 1 KG SM030H98 KG SM030H98 KG SM030H98<br />
3 Lock (Nitrided Alloy Steel) 1 KE SM030J32 KE SM030J32 KE SM030J32<br />
1 Bushing 1 KF SM040G99 KG SM040G98 KH SM040G98<br />
2 Seating Ring (Brass) 1 KG SM040H98 KG SM040H98 KG SM040H98<br />
3 Lock (Nitrided Alloy Steel) 1 KE SM040J32 KE SM040J32 KE SM040J32<br />
All seating rings are brass, all locks are nitrided alloy steel.
API Bottom Mechanical Seating Assembly<br />
SM025K99<br />
85<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
pull tubes<br />
86<br />
API Pull tubes<br />
Material <strong>and</strong> Part number<br />
Pump Bore Pin thread Reference o/dia API number Steel Brass<br />
1.250” 0.9375-16 15/16” T11-125 KA PT125A99* KG PT125A98*<br />
1.500” 1.1250-16 1 1/8” T11-150 KA PT150A99* KG PT150A98*<br />
1.750” 1.3125-16 1 5/16” T11-175 KA PT175A99* KG PT175A98*<br />
2.000” 1.5000-16 1 1/2” T11-200 KA PT200A99* KG PT200A98*<br />
2.250” 1.8750-16 1 7/8” T11-225 KA PT225A99* 1 KG PT225A98* 1<br />
nominal Barrel Length<br />
Minus nominal Plunger<br />
Length<br />
* Pull Tube length in whole inches (see table above for pull tube lengths)<br />
1 This size is also used for 2 1/2” bore pumps<br />
Example: 1 1/2” pump bore, steel pull tube, For use in 20-150 RWTC 16-6 = KA PT150A99110<br />
Pull tube Length in Whole Inches<br />
For 1 1/4” Bore <strong>Pumps</strong> For 1 1/2”, 1 3/4” <strong>and</strong> 2” Bore <strong>Pumps</strong> For 2 1/4” <strong>and</strong> 2 1/2” Bore <strong>Pumps</strong><br />
1 - - -<br />
2 015 014 012<br />
3 027 026 024<br />
4 039 038 036<br />
5 051 050 048<br />
6 063 062 060<br />
7 075 074 072<br />
8 087 086 084<br />
9 099 098 096<br />
10 111 110 108<br />
11 123 122 120<br />
12 135 134 132<br />
13 147 146 144<br />
14 159 158 156<br />
15 171 170 168<br />
16 183 182 180<br />
17 195 194 192<br />
18 207 206 204<br />
19 219 218 216<br />
20 231 230 228<br />
21 243 242 240<br />
22 255 254 252<br />
23 267 266 264<br />
24 279 278 276<br />
25 291 290 288<br />
26 303 302 300<br />
27 315 314 312<br />
28 327 326 324<br />
29 339 338 336<br />
30 351 350 348
API Pull tube<br />
KA Pt150A99110<br />
87<br />
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
valves<br />
88<br />
API Ball & Seat Valves<br />
Pump Bore Ball diameter API diameter<br />
106<br />
125<br />
150<br />
175<br />
200<br />
225<br />
250/275<br />
375<br />
* Select Seat <strong>and</strong> Ball material using table below<br />
Part number<br />
5/8” V11-106 VA106A98*<br />
9/16” - VA106B98*<br />
3/4” V11-125 VA125A98*<br />
11/16” - VA125B98*<br />
15/16” V11-150 VA150A98*<br />
7/8” - VA150B98*<br />
1 1/8” V11-175 VA175A98*<br />
1” - VA175B98*<br />
1 1/4” V11-200 VA200A98*<br />
1 1/8” - VA200B98*<br />
1 3/8” V11-225 VA225A98*<br />
1 1/4” - VA225B98*<br />
1 11/16” V11-250 VA250A98*<br />
1 1/2” - VA250B98*<br />
2 1/4” V11-375 VA375A98*<br />
2” - VA375B98*<br />
Example: 1 1/2” pump bore, 15/16” ball diameter, tungsten carbide seat, titanium carbide ball = VA150A9846<br />
1st Coding Letter Seat Material 2nd Coding Letter Ball Material<br />
1 API spec A1 : Stainless Steel 1 API spec A1 : Stainless Steel<br />
2 API spec B1 : Cobalt Alloy, Cast 2 API spec B1 : Cobalt Alloy, Cast<br />
4 API spec C1 : Tungsten Carbide 4 API spec C1 : Tungsten Carbide<br />
5 API spec C2 : Nickel Carbide 5 API spec C2 : Nickel Carbide<br />
6 API spec C3 : Titanium Carbide 6 API spec C3 : Titanium Carbide<br />
7 Silicon Nitride 7 Silicon Nitride<br />
VA150A98 VA175A98 VA225A98
MonofloALS@nov.com • www.nov.com/ArtificialLift<br />
PuMP CoMPonEntS
Houston office<br />
8708 W. Little York, Suite 100<br />
Houston, TX 77040<br />
Phone: (281) 854-0300<br />
Fax: (281) 854-0301<br />
www.nov.com/ArtificialLift<br />
MonofloALS@nov.com<br />
National Oilwell Varco has produced this catalog for general information only, <strong>and</strong> it is not intended<br />
for design purposes. Although every effort has been made to maintain the accuracy <strong>and</strong> reliability<br />
of its contents, National Oilwell Varco in no way assumes responsibility for liability for any loss,<br />
damage or injury resulting from the use of information <strong>and</strong> data herein. All applications for the<br />
material described are at the user’s risk <strong>and</strong> are the user’s responsibility.<br />
All br<strong>and</strong>s listed are trademarks of National Oilwell Varco.