Catalogue

Semi-Automatic and CNC Tube Benders
Join the Bending Revolution
Extraordinary Value & Design
Bridging the Tube Bender Size Gap
2
• Capacities to 5”
• Tight radius bending (1x diameter)
• Unmatched performance and value
• Many standard features that are
optional on competitive machines
Also available:
Bender tooling
Refurbished benders
Control retro-fits
CAPACITIES TUBE OUTSIDE DIAMETER X WALL THICKNESS
Machine Model T-50 T-100 T50-3 T100-3 T50 HD
T50-3HD
Round Tube, Non-Ferrous
Y.P. to 25,000 psi
2.5” x .187” 6” x .125” 2.5” x .187” 6” x .125” 3” x .187”
Round Tube, Mild Steel
Y.P. to 40,000 psi
2.5” x .083” 5” x .083” 2.5” x .083” 5” x .083” 3” x .109”
Round Tube, Stainless
Y.P to 60,000 psi
2.25” x .065” 4” x .109” 2.25” x .065” 4” x .109” 3” x .065”
Steel Pipe, Schedule 80/40 1” Sch.80 3” Sch.40 1” Sch.80 3” Sch.40 2” Sch.80
Square Tube, Mild Steel 1.5” x .083” 3” x .125” 1.5” x .083” 3” x .125” 2.5” x .083”
Rectangular Tube, E-Plane 1.5” x 3” x .109” 2” x 5” x .187”
Rectangular Tube, H-Plane 1.5” x 2.5” x .095” 2” x 4” x .125”
Round Bar, Mild Steel 1.5” 2.25” 1.5” 2.25” 1.625”
Square Bar, Mild Steel 1.25” 2” 1.25” 2” 1.5”
Section Modulus * .50 1.76 .50 1.76 .716
Torque 11,000 Ft. Lbs 22,000 Ft. Lbs. 11,000 Ft. Lbs. 22,000 Ft. Lbs. 13,800 Ft. Lbs.
*Note: Section Modulus Maximum(z) Mild Steel
D EALER INQUIRIES WELCOMED
Information on demand • www.neimanmachinery.com • 1-800-898-4106

SingleTouch Part-Handling Technology
1 Pick up your part once
2 Insert 4 different fasteners
TIS (Turret Insertion System) for cost
effective SingleTouch Part-Handling
3 DONE!
M4 Blind Nut
Haeger TIS
M4 Standoff
Haeger Model 824
OneTouch®
D EALER INQUIRIES WELCOMED
M4 Stud
M3 Standoff
Haeger’s 824 WindowTouch with standard InsertionLogic
Software,TIS (Turret Insertion System) and the new
InsertionGraphics Software. InsertionGraphics Software allows
the operator to see a digital part and fastener display for error
free insertion.
Hardware Insertion Solutions
Hardware Insertion Presses
A Quantum Leap in Productivity
To learn more about Haeger’s SingleTouch Part Handling
Technology, request our interactive CD-ROM
Information on demand • www.neimanmachinery.com • 1-800-898-4106
3

The World’s Largest Manufacturer of Ironworkers, Punching Machines and Steel Processing Lines
Single Cylinder Hydraulic Ironworkers
4
Microcrop, Minicrop, Multicrop and Bendicrop
36 to 50 ton punching range
New New
BENDICROP
Compact design with
5 - working stations!
PUNCHES, BENDS,
NOTCHES & SHEARS
Minicrop
Integrated bending station
MODEL ANGLE CAPACITY** PUNCH TONNAGE FLAT BAR THROAT DEPTH
(METRIC) CAPACITY
MICROCROP 80 x 80 x 8 36 350 x 6 or 200 x 13 170
MINICROP 80 x 80 x 8 45 300 x 10 or 200 x 13 175
MULTICROP 80 x 80 x 8 45 300 x 10 or 200 x 13 160
BENDICROP 80 x 80 x 8 50 350 x 10 or 350 x 15 177
Angle flat bar & throat depth capacities shown are metric: to convert to inches, divide by 25.4
**Capacities with standard anti-deformation blades. Larger capacity possible with optional blades (100x100x10)
D EALER INQUIRIES WELCOMED
Information on demand • www.iron-workers.com • 1-800-898-4106

The World’s Largest Manufacturer of Ironworkers, Punching Machines and Steel Processing Lines
Dual Cylinder Hydraulic Ironworkers
HYDRACROP Series
• Patented system to prevent deformation while cutting
angles and flats
• No “slug-loss” angle cutting
• Two foot pedals allow simultaneous operation of
both stations
• Unmatched ratio between the performance
(benefits of technical features) and price (both as
initial cost and machine cost per hour,
replacement spares and tooling)
Included with
all Hydracrop
Series
STANDARD
PRODUCTION PACKAGE
Includes 1 meter electric length gauge,
punch gauging table,
notcher-gauging table,
work light and 10 punches and dies
HYDRACROP 55
MODEL ANGLE CAPACITY** PUNCH TONNAGE FLAT BAR CAPACITY THROAT DEPTH
(METRIC)
HYDRACROP 55 A/S 120 x 120 x 10 55 300 x 15 or 200 x 20 250
HYDRACROP 55 SD 120 x 120 x 10 55 300 x 15 or 200 x 20 500
HYDRACROP 80 A/S 130 x 130 x 13 80 450 x 15 or 300 x 20 300
HYDRACROP 80 SD 130 x 130 x 13 80 450 x 15 or 300 x 20 500
HYDRACROP 110 A/S 152 x 152 x 13 110 600 x 15 or 400 x 20 300
HYDRACROP 110 SD 152 x 152 x 13 110 600 x 15 or 400 x 20 610
HYDRACROP 165 A/S 205 x 205 x 18 165 750 x 20 or 400 x 30 510
HYDRACROP 165 SD 205 x 205 x 18 165 750 x 20 or 400 x 30 610
HYDRACROP 220 A/S 205 x 205 x 18 220 750 x 20 or 400 x 30 385
HYDRACROP 220 SD 205 x 205 x 18 220 750 x 20 or 400 x 30 475
Angle, flat bar & throat depth capacities shown are metric; to convert to inches, divide by 25.4
** Capacities with standard anti-deformation blades, larger capacities possible with optional blades.
D EALER INQUIRIES WELCOMED
Information on demand • www.iron-workers.com • 1-800-898-4106
Punching U Channels
Punching up to 220 Tons
5

The World’s Largest Manufacturer of Ironworkers, Punching Machines and Steel Processing Lines
Automation for Steel Processing
of flats, angles and U-channels
6
90°
500x20
150x150x15
3xØ31+1xØ31
www.iron-workers.com
SEMI PAXY 1000
X-axis travel 1000mm
Y-axis travel 400, 500 or 600mm
axis speed 0-12m/min
ALFA 500
Designed for automatic cutting and punching of flats and angles. Optional features include
part marking, mitre cutting (flats +/- 45°). Line ProNet software and U-channel processing.
CNC Controlled Positioning Tables...
for Plates, Angles and Channels
Your solution to reduced layout & set-up time
No time wasted measuring and centre punching
IT’S THIS EASY
• The position of the holes to be punched is programmed either in
absolute or incremental dimensions.
• When the control is started, the guide stops will position for
the first hole.
• The material to be punched is placed against the guide stop
and the foot pedal is activated to punch.
• After the punch has returned to the pre-set clearance height,
the table guide stops move to the next programmed position.
• This sequence is repeated until all holes are punched.
positioning accuracy +/- 0.20mm/meter
repeatability +/- 0.10mm/meter
D EALER INQUIRIES WELCOMED
SEMI PAXY 1000
See the complete GEKA line of fully automatic
positioning devices at www.iron-workers.com
Information on demand • www.iron-workers.com • 1-800-898-4106

200/6 Fixed Angle Notcher
Radiusing
Bending
Rectangular Cutting
200/6 Fixed Angle Multi Notcher
Euromac MULTI-Purpose rear work stations get you more
production power. Add a press brake attachment (shown)
or punching tool, radiusing unit or a rectangular cutting
unit for ultimate flexibility.
Punching
Multi-Purpose Notching Machines
Automatic Blade Gap
Adjustment
Euromac notchers provide
perfect, burr-free cuts in
various materials up to
6.35mm, without manual
adjusting.
This part produced on
Model 220/6 Multi
220/6 R Variable Angle Notcher 220/6 Variable Angle Multi Notcher
There’s an ideal Euromac notcher for practically any task you need to accomplish. Simply select the
model with the combination of power and features that best suits your particular requirements.
Variable-Angle
Notching -
30º to 140º
MACHINE MODEL 200/6 F/A 200/6 F/A MULTI 220/6 R V/A 220/6 V/A MULTI
Blade Lengh
Material Capacity
200 mm 200 mm 220 mm 220 mm
(42 Kg/mm2 Mild Steel)
Strokes/Minute,
6.35 mm 6.35 mm 6.35 mm 6.35 mm
Maximun Cutting Length 50 50 50 50
Strokes/Minute, 50 mm Cut 65 65 80 80
Table Dimensions 850 x 600 mm 850 x 800 mm 950 x 790 mm 950 x 1030 mm
Overall Dimensions (WxDxH) 780 x 600 x 1020 mm 850 x 800 x 1150 mm 1000 x 860 x 1200 mm 1100 x 950 x 1280 mm
Weight 480 Kg 540 Kg 950 Kg 1060 Kg
D EALER INQUIRIES WELCOMED
Information on demand • www.neimanmachinery.com • 1-800-898-4106 7

CNC Punching Machines
360º OF FLEXIBILITY
PROGRAMMING SOFTWARE
On line TOP PUNCH software allows
simple and fast Autoindex programming
using the
unique and friendly
interface. Optional
EASY-CAM offline
software will also allow
simple Autoindex programming and engraving,
beading, forming and marking operations.
AUTOINDEX
Autoindex is a function of ZX and
MTX machines that allows the
unique possibility to rotate a
4 or 6 Station Multitool and
Single Tools.
The advantages of Autoindex are:
• Free programming of all lines
which cannot be made on a
machine without a rotating
station.
• Free programming of all kinds
of notches without any special
tools.
• More flexibility.
8
Turret or Single Station... you choose
BEADING AND FORMING
With these functions you can
make linear forming:
• Ribs, flanges and raised areas
across the entire work surface.
• Offsets and embosses not
limited to a station range.
AUTOINDEX TECHNOLOGY
Advanced and accurate mechanical design allows extremely precise
punch and die alignment. You can punch thick materials (up to
10mm) guaranteeing minimal burr and longer tool life.
CPS SYSTEM
MARKING
High speed marking up to 1,000
hits a minute.
ENGRAVING & DECORATION
This function is ideal for inscribing,
drawing or marking any
kind of decoration on the sheets.
CPS SYSTEM
CPS System controls the
punch speed and its position,
stopping the punch where
required. It allows special
functions like: engraving,
beading, forming and
marking
MTX Autoindex punching machine
ZX Autoindex punching machine
Punch and die rotation
(Autoindex) has been designed
with a direct system that includes
few mechanical components,
that’s why it is extremely
accurate.
Information on demand • www.neimanmachinery.com • 1-800-898-4106

Store up to
100 programs
Euromac bendng machines give you the power and versatility to execute a wide variety of operations,
from flat edge bending to punching and shearing. Our Digibend 360 will bend bars in sizes of up to
200 x 30mm, while our larger Digibend 720 can handle up to 200 x 50mm
Euromac digibends are ideal for bending
bar stock up to 200mm x 40mm.
Single-Post Punch and Die Set (shown)
for bending flat bar up to 12mm thick.
D EALER INQUIRIES WELCOMED
Rotary Tube Bending Tool bends up to
50mm tubing up to 180º.
Two-Jaw Rotary Bending Tool - Bend
flat bar the easy or hard-way. Up to
50mm x 12mm up to 90º.
Handle Difficult Bending Jobs with a Euromac Bending Machine
Euromac offers a complete line
of tooling to enable fast, efficient
completion of almost any bending job.
Optional CNC
backgauge
Quick tooling
changeover
Versatile CNC Bending Machines
Punching Tool punches up to 30mm
holes in bar stock up to 10mm thick.
EASILY BEND THESE PARTS
MACHINE MODEL DIGIBEND 160 DIGIBEND 360 DIGIBEND 720
Ram Force - Tonnage (kN) 16 (160) 36 (360) 72 (720)
Lengh of Stroke 200mm 250mm 350mm
Table Dimensions (mm) 920 x 480 1170 x 580 1520 x 650
Overall Dimensions (WxDxH) 950 x 580 x 1100 1170 x 680 x 1130 1520 x 750 x 1170
Weight 390 Kg 900 Kg 1800 Kg
Information on demand • www.neimanmachinery.com • 1-800-898-4106 9

Manual, Semi-Automatic and CNC Bending Rolls
10
Pivoting Top Roll
Cone bending attachment
Model 8344 CNC
Model 8266 Motorized Bending Rolll
Easily form cylinders
Eliptical shapes
D EALER INQUIRIES WELCOMED
Information on demand • www.neimanmachinery.com • 1-800-898-4106

Your Ultimate Solution
for Tapping Applications
• M2 - M27 tapping range
• Very Ergonomic
• Designed for production use
• Many options available
Roscamat 400
Many uses...
• Moulds
• Dies
• Automation industry
• Plate industry
• Automotive industry
• Metalworking
• Auxiliary in CNC machines
D EALER INQUIRIES WELCOMED
Articulated Tapping Arm Machines
Roscamat 500
Roscamat 200
Roscamat 500RH
Information on demand • www.neimanmachinery.com • 1-800-898-4106 11