shifters - Paradise Road Speed and Custom
shifters - Paradise Road Speed and Custom
shifters - Paradise Road Speed and Custom
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
how do i cut Stainless Steel inner wire?<br />
We recommend Klein diagonal wire cutters, Part No . D2000-28 (available at Grainger’s, Part No . 4A838) or a quality pair of side cutters .<br />
what do i use to mount my throttle cable <strong>and</strong> kickdown?<br />
Use Lokar SRK-4000 Carburetor Bracket <strong>and</strong> Return Spring Kit for mounting Lokar Throttle Cable with all Kickdown applications . Carbureted<br />
Tuned-Port, Blower Drive, Tri-Power <strong>and</strong> EFI have specific brackets . See pages 35-36-37 .<br />
where does the carburetor bracket mount?<br />
Our SRK-4000 Carburetor Bracket <strong>and</strong> Return Spring Kit mounts to the driver’s side rear stud of the carburetor .<br />
what is a hex carb fitting?<br />
The hex carb fitting on a Lokar Kickdown is the attached stud on the gray plastic piece mounted onto the end of the inner wire .<br />
The Lokar name is molded on the side .<br />
what carburetors are compatible with your aod kickdowns?<br />
Our AOD Kickdown is compatible with all Edelbrock <strong>and</strong> Holley 4 barrels that have a hole 1 1/8" below the center of the throttle shaft .<br />
Can i use your th-350 Stainless kickdown Bracket & Cable (part no. kd-2350u) on a Big Block Chevy?<br />
No, but you can use our Hi-Tech TH-350 Kickdown for the Big Block Chevy . You will probably also need to use an SRK-4000 Spring Return Kit to mount it .<br />
Can your hi-tech th-400 kickdown be used with any th-400, or only specific ones?<br />
Part No . KD-2400HT can be used with all TH-400 transmissions . The electrical hookup is located on the driver’s side of the transmission mid way near the<br />
pan rail .<br />
Midnight series<br />
do you have any parts that look “factory”?<br />
We now offer most of our product line in our Midnight Series . Steel products are black powder coated <strong>and</strong> aluminum products are black anodized .<br />
Mounting Brackets<br />
do you offer a mounting bracket for the demon Carburetor?<br />
Yes . You are able to use the Lokar Stainless Steel Throttle Cable Bracket & Springs, Part No . SRK-4000 .<br />
<strong>shifters</strong><br />
Shifter adjustment information:<br />
in what gears does the Lokar shifter lock?<br />
Lokar <strong>shifters</strong> fully lock in Park <strong>and</strong> Neutral . The lock-out system is designed so that the shifter cannot be accidentally bumped into gear from the Park or<br />
Neutral position . You must fully depress button to get shifter out of Park or Neutral .<br />
when using your <strong>shifters</strong> in a 4-wheel drive application, do i mount the rear bracket to the transfer case?<br />
No . It does not require mounting the rear bracket to the transfer case . You will simply tighten the setscrews in the top middle of the main plate .<br />
what do i do if the car starts in reverse, but not in park?<br />
Adjust neutral safety switch as described in the instructions provided with kit .<br />
when changing from one transmission to another, can i use the same shifter?<br />
There is no reason to buy another shifter . Conversion kits are available direct from Lokar . Call Lokar to order a conversion kit for your specific needs .<br />
the Lokar automatic transmission Shifters all come through the floor, are they all considered to be “floor mount”?<br />
No, they are not all considered to be “floor mount” . Lokar manufactures several different types of automatic transmission <strong>shifters</strong> . These are the transmission<br />
mount, tail mount, floor mount <strong>and</strong> the cable operated shifter . When referring to a Lokar floor mount shifter, the shifter is actually bolted directly to<br />
the floor pan .<br />
is the Cable operated Shifter more versatile than the floor Mount Shifter?<br />
Each shifter has benefits that will allow it to work in certain applications better than the other one . As a general rule, if the shifter is mounted toward the<br />
front of the transmission you will need to use the cable shifter . When the shifter is mounted toward the rear of the transmission you will not see any benefit<br />
from using the cable, unless the mounting of the shifter is desired more than 2” right or left of the center line, but otherwise the floor mount will actually<br />
work better in a rearward mounting location .<br />
GM <strong>shifters</strong>:<br />
is your shifter able to mount in the same location on a 700-r4 as a th-350?<br />
Yes .<br />
how do i tell if i have a 4L60 or a 4L60E transmission?<br />
The 4L60 has a 4-bolt tail shaft <strong>and</strong> the 4L60E has a 6-bolt tail shaft .<br />
FoRD <strong>shifters</strong>:<br />
what shifter do you offer for a fordomatic?<br />
For a late Fordomatic 3-speed 1957 or later, with Park above Neutral, you may use an FMX Shifter .<br />
do you make a shifter that fits a C-5?<br />
Our C-4 automatic transmission shifter works for a C-5 .<br />
toll Free 1-877-469-7440<br />
Frequently Asked<br />
Questions<br />
71