Aesculap® microspeed uni - knoglemekanik.dk

Aesculap ® microspeed uni 

Get the speed you need 

Aesculap Power Systems

2 

Get the speed you need. 

Small - powerful - inspiring 

This completely innovative high speed motor 

from Aesculap sets a new milestone in the 

field of electric motor systems. 

By means of a new, patented motor technology, 

it has been possible to achieve what, you as a 

surgeon and we as the developers of the first 

electric motor for surgical use, have been 

dreaming of for years: a high speed electric 

motor that is as small and powerful as a fine 

espresso! 

You will be inspired by this unique innovation. 

small – powerful – inspiring ....

.................................small – powerful – inspiring 

Small 

Until today the size of an electric high speed 

motor was limited. Excessive heat generation 

and lack of power were the two major prob - 

lems. Only by means of an exceptional technological 

leap Aesculap was able to over come 

this technical obstacle. Resulting in the 

microspeed uni XS motor - the smallest high 

speed electric motor in its speed class on the 

global market. Combined with the slimline, 

ergonomic Hi-Line XS hand pieces and the 

Hi-Line XS precision tools, the compact 

microspeed uni XS high speed motor allows 

for optimum visibility of the operation site, 

even in deep and very small accesses. 

Powerful 

Small - but as powerful as its larger counter - 

parts. The microspeed uni XS motor shows 

its true greatness in clinical use. Thanks to 

its new patented motor technology, cutting 

operations can be performed at a constant 

power and a speed of 80.000 rpm. The 

microspeed uni XS motor thus performs 

high-torque skull perforation as effortlessly 

as it does burring procedures to the 

vertebral column. 

You will undoubtedly be impressed by this 

compact power pack. 

3

4 

Relax – the power is in your hand. 

ergonomic, lightweigh 

t and quiet........... 

Ergonomic, lightweight and quiet - 

absolute perfection! 

With a weight of under 100 g and an out stan ding 

design, the microspeed uni XS motor nestles like 

a pencil in your hand. 

The sure grip profile of the compatible Hi-Line XS 

handpieces round off this ergonomic master piece. 

Fatigue free operation, however, also means noisefree 

operation. The extremely low noise level of 

the new high speed motor re presents a further 

accomplishment of this innovative and unique 

motor concept.

...............................................absolute perfection 

Highest reliability 

The revolutionary motor technology coupled with 

top-grade materials and high-precision production 

methods afford the microspeed uni XS motor the 

highest level of quality and reliability. 

5

6 

Relax – the power is in your hand. 

The control unit - High tech for 

intuitive and easy operation 

Touch Screen with clear, self-explaining 

symbols and intuitive user dialog for easy 

operation 

Customizable settings: Acceleration and 

stopping characteristics for individual 

motors, oscillation angle and much more 

can be adapted to your indi vi dual pre - 

ference 

The versatile control unit combined 

with the microspeed uni motors and 

hand pieces designed for specific indications 

makes it a perfect system for 

Neuro 

Neurotology 

Spine 

Small bone 

Arthroscopy 

Two motor connection sockets for effort - 

less switching between the motors 

Integrated irrigation pump allows 

precise adjustments of the 

pump flow 

GD670 

GD668 GD671 

The foot controls 

Their high-quality finish and resistance against 

fluids ensure a long lifetime for our foot control 

switches. Two options of foot switches are avail - 

able - one pedal or two pedals.

GD681 

GD675 

GD672 

GD682 

The motor cables 

GD684 

GD673 

The motor cables are available either with hand 

control or for use with our foot control pedals. 

GD685 

GD676 

GD678 

GD674 

The motors 

Specialized motors for 

special requirements 

The eight microspeed uni motors have 

been designed especially for the indi - 

cation specific requirements. Com bine 

them with its three spe cialized handpiece 

ranges, Hi-Line XS, micro-Line, mini- 

Line and you get the system according to 

your wishes. 

Unrestricted cleanability 

The high-grade titanium motors and motor cables 

can be safely processed with alkaline cleaning 

agents. With Eccos, the ingenious storage and 

cleaning system, they can be washed simply and 

practically in the washing machine. For more in - 

formation please refer to page 21. 

Top grade material 

State-of-the art manufacturing technology, years 

of experience in the field surgical motors, and 

the application of top-grade material such as 

titanium make a product of value and quality. 

7

8 

microspeed uni – 

for neuro, neurotology and spine 

Precise interventions require 

instruments that are especially 

adapted to the task 

In order to perform high-precision neuro, neurotolo 

gical and spinal procedures, surgical instruments 

that do not impair the tactile sense are of 

enormous impor tance. Moreover, new, minimally 

invasive access techniques increasingly require 

the use of miniaturized instruments for the purpose 

of enhancing visibility of the operating site. 

During the development of our motor systems, 

the focus is therefore always on a design which 

is adapted to the latest access techniques and 

the most recent findings in ergonomics. 

microspeed uni XS high speed motor GD675 

Smallest and lightest high speed motor 

with a speed range of 10.000 - 80.000 

rpm! 

Constant power through special motor 

actuation 

Low heat generation - despite extremely 

compact design and maximum power 

Extremely quiet 

Acceleration and stopping characte - 

ristics can be adjusted to individual 

requirements 

Unrestricted motor guidance thanks 

to particularly thin and flexible motor 

cable 

Easy handling of the eXtra Slim 

Hi-Line XS handpieces 

Smooth-running and vibration-free

microspeed uni high speed motor GD676 

Compatible with all Hi-Line and Hi-Line XS 

handpieces 

Can be combined with motor cables with hand 

control or with foot control pedals 

Speed range: 10.000 - 80.000 rpm 

Constant power through special motor actuation 

Acceleration and stopping characteristics can be 

adjusted to individual requirements 

Spray nozzles for Hi-Line XS handpieces 

Handpiece Spray nozzle 

Craniotome/multi GB767SU 

purpose handpiece 

1 ring handpiece GB761SU 



XL 1 handpiece GB764SU 



9

High speed – Hi-Line XS 

GB740R Hi-Line XS craniotome, to 

be used with dura guards, drilldepth 

guard and holding sleeve 

GB741R-GB748R (suitable spray 

nozzle GB767SU) 

GB741R Hi-Line XS dura guard, 1 

ring code, to be used with craniotome 

burrs GE420R, GE420SU, 

GE429SU 




GE529SU 




GE629SU 

GB746R Hi-Line XS dura guard, 

steerable, 1 ring code, to be used 

with craniotome burr GE420R, 

GE420SU, GE429SU 

GB747R Hi-Line XS dura guard, 




GB748R Hi-Line XS dura guard 




GB744R Hi-Line XS drill depth 

guard, for craniotome and multipurpose 

handpiece GB740R, drill 

depth from 2-8 mm adjustable 

GB745R Hi-Line XS holding sleeve, 

for craniotome and multipurpose 

handpiece GB740R 

10

High speed – Hi-Line XS 

11 

~ 130 mm 

~ 40 mm 

~ 70 mm 

~ 100 mm 

~ 40 mm 

~ 70 mm 

~ 100 mm 

~ 170 mm 

~ 220 mm 

GB751R Hi-Line XS handpiece, 

straight, 1 ring code (suitable 

spray nozzle GB761SU) 








angled, 1 ring code 

(suitable spray nozzle GB761SU) 








angled, extra long, XL 1, 1 bold 

ring code (suitable spray nozzle 

GB764SU) 




GB765SU) 




GB766SU)

12 



Highspeed tools 

approx. 40 mm 

GB740R 

approx. 40 mm 

GB751R GB756R 

GB741R GB746R 

GB743R GB748R 

Drill depth 

guard 

2 – 8 mm 

GB744R 

Rosen burrs 

Twist drills 

GE420R GE429SU 

Craniotome cutters 

spiral straight 


Ø 1.0 Ø 1.1 Ø 1.2 Ø 1.5 

GE390R GE391R GE389R GE395R 

GB742R GB747R 

GB745R 

Diamond burrs 

coarse 


Ø 1.0 Ø 1.4 Ø 1.8 Ø 2.3 Ø 2.7 Ø 3.1 Ø 4.0 Ø 5.0 Ø 6.0 

GE401R GE402R GE403R GE404R GE405R GE406R GE407R GE408R GE409R 

Diamond burrs 

Diamond burrs 

coarse extra coarse 

Ø2.3 Ø3.1 Ø4.5 Ø6.0 


Twist drills Diamond disc 

Ø 1.5 Ø 2.0 

GE432R GE433R 



Ø22 

GE430SU 

2-8 mm 

Holding 

sleeve 

Neuro cutters 

Ø 1.8 Ø 2.3 Ø 3.1 

GE431R GE434R GE435R 

Rosen burrs 



Ø 3.1 Ø 5.0 Ø 6.0 


Ø 1.0 Ø 1.4 Ø 1.8 Ø 2.3 Ø 2.7 Ø 3.1 Ø 4.0 Ø 5.0 Ø 6.0 


Tungsten carbide 

Ø3.1 Ø4.0 Ø5.0 

GE406TC-SU GE407TC-SU GE408TC-SU 

Twin-Cut 

burrs 

Ø 5.0 Ø 6.0 

GE396R GE397R 

Acorn burr 

Ø6.0 

GE437R 

Neuro cutter 

Ø3.1 

GE435TC-SU 

Pin cutter 

Ø 1.0 

GE392R

approx. 70 mm 

GB752R GB757R 

approx. 70 mm 

Rosen burrs 

Ø1.0 Ø1.4 Ø1.8 Ø2.3 Ø2.7 Ø3.1 Ø4.0 Ø5.0 Ø6.0 


Diamond burrs 

Ø 1.0 Ø 1.4 Ø 1.8 Ø 2.3 Ø 2.7 Ø 3.1 Ø 4.0 Ø 5.0 Ø 6.0 


Diamond burrs 


Ø 2.3 Ø 3.1 Ø 4.5 Ø 6.0 


Barrel burrs 

soft cut 

Ø4.0 Ø5.0 Ø6.0 


Pin cutter 

Ø1.0 

GE521R 

Sied rasp burr 

Ø 2.35 

GE528SU 

Lindemann 

12 mm 

Barrel burr 

standard 

Ø 4.0 Ø 6.0 

GE544R GE546R 

12 mm 

Ø1.4 Ø1.4 

GE522R GE523R 


Rosen burrs 

Ø4.0 Ø5.0 

GE507TC-SU GE508TC-SU 

Neuro cutters 

Ø 1.8 Ø 2.3 Ø 3.1 Ø 3.1 


Cone burrs 

Ø4.0 Ø6.0 

GE540R GE542R 

Diamond disc 

Ø 22 

GE530SU 

Neuro cutter 

Ø3.1 

GE535TC-SU 

Acorn 

burr 

Ø 6.0 

GE546R 

Reverse taper 

burr 

Ø 4.0 

GE539R 

diamond coarse 

Ø3.1 Ø3.1 

GE554R GE555R 

Twist drills 

Ø 1.5 Ø 2.0 

GE532R GE533R 

13

14 



Highspeed tools 

approx. 100 mm 

GB753R GB758R 


Rosen burrs 

Ø 1.8 Ø 2.3 Ø 2.7 Ø 3.1 Ø 4.0 Ø 5.0 Ø 6.0 

GE603R GE604R GE605R GE606R GE607R GE608R GE609R 

Diamond burrs 

Ø 1.8 Ø 2.3 Ø 2.7 Ø 3.1 Ø 4.0 Ø 5.0 Ø 6.0 

GE613R GE614R GE615R GE616R GE617R GE618R GE619R 

Diamond burrs 


Ø2.3 Ø3.1 Ø4.5 Ø6.0 


Barrel burrs 

soft cut 

Ø 4.0 Ø 5.0 Ø 6.0 Ø 4.0 


Sied rasp burr 

Ø 2.35 

GE628SU 


Rosen burrs 

Ø4.0 Ø5.0 

GE607TC-SU GE608TC-SU 

Neuro cutters 

Ø1.8 Ø2.3 Ø3.1 Ø3.1 


Barrel burrs 

standard 

ø 4.0 Ø 6.0 

GE644R GE646R 

Neuro cutter 

Ø3.1 

GE635TC-SU 

Reverse taper 

burr 

Ø 4.0 

GE639R 

Neuro cutters 

diamond coarse 

Ø3.1 Ø3.1 

GE654R GE655R

XLI 

XLII 

XLIII 


GB771R 

XLI 

GB772R 

XLII 

GB773R 

XLIII 



Rosen burrs 

Ø2.3 Ø3.1 Ø4.0 Ø5.0 Ø6.0 

GE704R GE706R GE707R GE708R GE709R 

Neuro cutter 

Ø 3.1 

GE702R 

Rosen burrs 

Barrel burrs 

soft cut 

Ø3.1 Ø4.5 Ø6.0 

GE280SU GE282SU GE281SU 

Ø4.0 Ø5.0 Ø6.0 


Diamond burrs 

Rosen burrs Diamond burrs 

Ø3.1 Ø4.5 Ø6.0 


Diamond burrs 

Twist drill 

Ø3.1 Ø4.5 Ø6.0 


Ø3.1 Ø4.5 Ø6.0 


Ø2.3 Ø3.1 Ø4.0 Ø5.0 Ø6.0 

GE714R GE716R GE717R GE718R GE719R 

Ø1.5 

GE700SU 

Neuro cutter 

Ø3.1 

GE288SU 

Neuro cutter 

Ø3.1 

GE298SU 

Barrel burr 

soft cut 

Ø4.0 

GE285SU 

Barrel burrs 

soft cut 

Ø4.0 

GE295SU 

15

16 



The high speed system with low speed 

value added 

The range of applications for the microspeed uni 

system extends beyond advanced high speed 

burring. Complete your system, for example with 

the new perforator driver, the universal drill 

handpieces or the soft-tissue sparing micro-saws. 

microspeed uni perforator driver GD685 

Extremely short design through integration 

of the motor in the handpiece! 

The short design and the proximity 

of the grip surface to the skull ensure 

the best possible control via the 

motor during the skull perforation 

Powerful torque 

Constant power through special 

motor actuation 

Absence of rotating parts ensures safe 

operation 

Speed range: 800-1.200 rpm 

All common safety perforators with 

Hudson shanks can be used 

Can be combined with motor cables 

with hand control or with foot control 

pedals 

new

microspeed uni low speed motor GD678 

Low speed motor for all microsurgical 

sawing and drilling operations 

Speed range: 1.000 - 30.000 rpm 

Can be combined with motor cables with 

hand control or with foot control pedals 

Wide choice of micro-Line handpieces 

available 

Constant power through special motor 

actuation 

Acceleration and stopping characteristics 

can be adjusted to individual requirements 

Low speed – micro-Line 

ca. 45 mm 

ca. 75 mm 

~ 15 mm 

ca. 45 mm 

ca. 15 mm 

GB129 micro-Line sagittal saw 

GB130R micro-Line reciprocating 

saw 

GD305 micro-Line reciprocating 

saw, incl. saw blade GD320R 

GD307 micro-Line sagittal saw 

GD450M micro-Line handpiece 1:1, 

for 70 mm burrs, coding: 1 blue ring 

GD451M micro-Line handpiece 1:1, 

for 95 mm burrs, coding: 1 blue ring 

GD455M micro-Line handpiece 

1:2, for 70 mm burrs, coding: 

1 red ring 



1 red ring 



1 red ring 

GB111 micro-Line handpiece 4:1, 

coding: 1 green ring 

GB119 micro-Line angle piece head 

2:1, coding: 1 green dot, for dental 

shank 

GB300R Cranial perforator with 

Hudson shank, ø 6/9 mm 





17

18 


for small bone surgery and arthroscopy 

Ergonomic, lightweight design meets 

endless power 

These two low speed motors, with 16.000 rpm 

are ideal for the requirements of small bone 

surgery. Combine these motors with a wide 

choice of mini-Line handpieces. Sawing, drilling, 

burring, wiring - the mini-Line has it all! 

For information on the respective 

tools, please refer to our Burrs & 

Blades catalogue O17599. 

microspeed uni pistol GD684 

Low speed pistol for arthroscopy and 

small bone surgery 

Compatible with all mini-Line handpieces 

Lightweight and ergonomic shape for 

fatigue-free and precise operating 

Oscillation- and tapping mode for a 

safe and accurate preparation of screw 

holes - primarily in tight approaches in 

small trauma 



requirements

microspeed uni mini motor GD674 

Pencil-shaped microspeed uni motor for 

small bone surgery 

Compatible with all mini-Line hand pieces 

Can be operated either with the motor 

cable with hand control GD673 or with the 

motor cable for foot control GD672 

Acceleration and stopping characteris tics 

can be adjusted to individual requirements 

Low speed – mini-Line 

GB376R mini-Line burr attachment, 

1:2, for tools with 2.35 mm 

shank 

GB382R mini-Line drill attachment, 

16:1, for tools with AO shank 


16:1, Jacobs chuck Ø 0 - 4.0 mm 


36:1, Jacobs chuck Ø 0 - 6.5 mm 


36:1, for tools with hexagonal 

shank 

GB373R mini-Line angled drill 

attachment, 8:1, for tools with 

dental shank 

GB374R mini-Line angled K-wire 

chuck, 17:1, Ø 0.6 - 1.6 mm, for 

use with microspeed uni mini 

motor GD674 

GB398R mini-Line K-wire chuck 

16:1, Ø 0.6 - 2.5 mm, for use with 

microspeed uni pistol GD684 

GB390R mini-Line sagittal saw 

attachment 

GB391R mini-Line reciprocating 

saw attachment 

GB392R mini-Line transversal saw 

attachment 

19

20 


for small bone surgery and arthroscopy 

Arthroscopic procedures require 

reliable, ergonomically sophisticated 

shaver handpieces 

The microspeed uni shaver handpieces excel in 

particular thanks to their compact, lightweight 

design. Even extremely long operations can thus 

be performed comfortably and without fatigue. 

Modern production technologies and the use of 

top-grade materials are characteristic of these 

first-class quality products. 

Combined with our extensive range of shaver 

blades and burrs, the microspeed uni system is 

one of the most sophisticated and advanced 

shaver systems available. 

microspeed uni shaver handpiece with hand control GD681 

The ergonomic two button control design 

allows easy operation of oscillation, 

right and left mode with fingertips 

Compact, lightweight (275 g) construction 

with ergonomic design for fatiguefree 

and precise operating 

Automatic tip recognition 

Speed range shaver tips: 400 - 5.000 rpm 

Speed range reamer tips: 

1.000 - 8.000 rpm 

Oscillation frequency: 0.3 - 2.0 seconds 



requirements 

Suction power easily adjustable over 

the control lever on the handpiece

microspeed uni shaver handpiece GD682 

Compact, lightweight (275 g) construction 

with ergonomic design for fatiguefree 

and precise operating 

Automatic tip recognition 

Speed range shaver tips: 

400 - 5.000 1/min 

Speed range reamer tips: 

1.000 - 8.000 1/min 

Oscillation frequency: 

0.3 – 2.0 seconds 

Acceleration and stopping charac te- 


requirements 

Suction power easily adjustable over 

the control lever on the handpiece 

21

22 


for arthroscopy 

Shaver blades and burrs for standard and small joint arthroscopy 

Top quality for top performance and safety 

The Aesculap shaverblades and burrs provide outstanding 

performance in bone and tissue resection. The application 

of superior materials and a revolutionary manufacturing 

process produce precision cutting edges which lead to 

aggressive and efficient cutting motion with reduced 

clogging effect. In addition all Aesculap shaverblades and 

burrs feature a unique safety concept which avoids metal 

breakage in the joint when the blades get overstressed – 

safety for you and your patient! 

Ø in mm Article no. Discription 

3.0 

3.7 

4.5 

5.5 

3.0 

3.7 

4.5 

5.5 

4.5 

4.5 

3.7 

4.5 

5.5 

new 

GB955SU 

GB965SU 

GB975SU 

GB985SU 

GB956SU 

GB966SU 

GB976SU 

GB986SU 

GB996SU 

GB997SU 

GB967SU 

GB977SU 

GB987SU 

Full Radius Resector 

cutting right and left; for all 

indications, e.g. meniscectomy, 

syno vec tomy, chondro ma la cia 

Full Radius Resector Toothed 

cutting right and left; toothed 

inner and outer blade; for all 

indications, e.g. meniscectomy, 

synovectomy, chondromalacia 

Full Radius Resector Twin Cut 

cutting right and left; inner blade 

with two toothed windows for 

rapid ablation, for all indications, 

e.g. meniscectomy, synovectomy, 

chondromalacia 


4.5 

5.5 

3.0 

3.7 

4.5 

4.5 

4.5 

3.0 

4.5 

new 

new 

GB959SU 

GB969SU 

4.5 GB972SU 

GB951SU 

GB961SU 

GB971SU 

GB992SU 

GB993SU 

GB953SU 

GB973SU 

Allrounder 

cutting right and left; special cutting 

edges design for effective tissue and bone 

resection; inner blade with two toothed 

windows ensures rapid ablation, 

for all indications, e.g. synovectomy, 

chondromalacia, arthroscopic abrasion 

Whisker 

4.5 GB979SU cutting, right and left; for joint 

debridement, final smoothing of 

soft tissue or cartilage defects 

Bilateral Cutter 

cutting right and left; meniscectomy 

especially in the posterior horn 

region 

Lateral Cutter Toothed 

cutting right and left; toothed inner 

and outer blade; meniscectomy and 

joint debridement 

Cartilage Trimmer 

cutting right and left; smoothing 

of cartilage layer defects and meniscal 

tissue


4.5 GB974SU 

3.0 

3.7 

4.5 

6.0 

6.0 GB990SU 

3.7 

6.0 

new 

GB958SU 

GB968SU 

GB978SU 

GB988SU 

6.0 GB989SU 

GB981SU 

GB991SU 

Ellipsoid Resector 

cutting right and left; cutting 

geometry specially suited for joint 

debridement and synovectomy 

Round Burr 

cutting to the right; reamer for 

arthroplastic abrasion, cartilage 

trimming, removal of osteo phytes 

Acromion Burr 

cutting to the right; special 

reamer for acromion plasty 

Round Surface Burr 

cutting to the right; reamer for 

arthroplastic abrasion, notch 

plasty etc. 

Conical Surface Burr 

cutting to the right; aggressive reamer 

for arthroplastic abrasion, 

notch plasty etc. 

4.5 

4.5 

Shaverblades and burrs for hip arthroscopy 

Cox shaverblades and burrs 

GB835SU 

GB836SU 

5.5 GB837SU 

6.0 GB838SU 

6.0 GB839SU 

1.2 GB827R 

new 

For an easy and secure insertion all Aesculap hip arthroscopy 

shaverblades and burrs can be introduced via a flexible guiding 

wire. Not only the length is adapted to the particular require - 

ments of the hip joint also the stability of these shaverblades 

and burrs is increased considerably. 


Cox Full Radius Resector Toothed 

angled 20°; canulated; to be used 

for synovectomies, cartilage defects, 

lesions of lig. teres and debridement 

of labral tears in the central compartment 

Cox Full Radius Resector Twin-Cut 

canulated; cutting right and left; 

inner blade with two toothed windows 

for rapid ablation of joint 

capsule and synovialis in the peripheral 

compartment 

Cox Round Surface Burr 

cutting to the right; reamer for bone 

resection, e.g. femoroacetabular impingement, 

resection of osteophytes 

Cox Round Burr 

cutting to the right; reamer for bone 

resection, e.g. femoroacetabular impingement, 

resection of osteophytes 

Guiding wire; nitinol 

can be used with all Aesculap Cox 

shaverblades and burrs 

23

24 


accessories 

GA411 Mobile stand 

for microspeed uni control unit; 

adjustable height 

GA391SU Tubing set 

complete with adaptor for spray nozzle, 

fixation clips and short spike; for single 

use; 

GA392SU Tubing set with Y-adapter 

complete with adaptor for spray nozzle, 

fixation clips and short spike; for single 

use; 

Other accessories can be found in our Aesculap Power Systems catalogue O22702.


processing and maintenance 

Eccos 

Speed 

Eccos allows mechanical processing of 

the complete microspeed uni family. 

GB255R Eccos set for neurosurgery 

50 mm 

comprising: Quantity 

JF212 1 

GB587R 1 

GB586R 1 

GB614R 1 

GB615R 1 

GB689R 1 

Maintenance with Sterilit 

Sterilit allows optimal maintenance of your microspeed uni motor system. 

GB600870 

microspeed uni XS 

GB600810 

mirco-line 

Safety 

Mechanical cleaning ensures consistent 

processing quality. 

GB254R Eccos set for small bone surgery 

50 mm 

comprising: Quantity 

JF212 1 

GB579R 1 

GB673R 1 

GB674R 2 

GB690R 3 

GB600820 

microspeed uni, 

microLAN, miniLAN, 

Hi-Line, Hi-Line XS, 

HiLAN, HiLAN XS 

GB600830 

mini-line 

Simplicity 

For simple intraoperative handling, Eccos 

offers clearly arranged storage solution 

for the machines throughout the entire 

sterile goods cycle. 

Reprocessing with Eccos 

On this page you will find Eccos standard 

trays for the microspeed uni motor 

system. 

However, you can also use Eccos to 

compose your individual storage 

system or extend our standard trays. 

Handpieces and motors shown in the 

illustrations are not included in delivery 

of storage products. 

50 mm 

This symbol indicates the respective 

tray height. 

GB600 

Sterilit Power Systems 

Oilspray 

25

Ordering information 

Shaver blades and burrs 

for standard and small joint arthroscopy 

GB951SU Lateral cutter toothed, Ø 3.0 



GB992SU Lateral cutter toothed, Ø 4.5 concave curved 

GB993SU Lateral cutter toothed, Ø 4.5 convex curved 

GB972SU Bilateral cutter, Ø 4.5 

GB953SU Cartilage trimmer, Ø 3.0 

GB973SU Cartilage trimmer, Ø 4.5 

GB974SU Ellipsoid resector, Ø 4.5 

GB955SU Full radius resector, Ø 3.0 




GB956SU Full radius resector toothed, Ø 3.0 




GB996SU Full radius resector toothed, Ø 4.5 concave curved 

GB997SU Full radius resector toothed, Ø 4.5 convex curved 

GB967SU Full radius resector twin cut, Ø 3.7 



GB959SU Allrounder, Ø 4.5 

GB969SU Allrounder, Ø 5.5 

GB979SU Whisker, Ø 4.5 

GB958SU Round burr, Ø 3.0 




GB989SU Acromion burr, Ø 6.0 

GB990SU Round surface burr, Ø 6.0 

GB981SU Conical surface burr, Ø 3.7 

GB991SU Conical surface burr, Ø 6.0 

Shaver blades and burrs 

for hip arthroscopy 

GB835SU Cox Full Radius Resector toothed, Ø 4.5 

GB836SU Cox Full Radius Resector toothed, Ø 4.5 

GB837SU Cox Full Radius Resector Twin-Cut, Ø 5.5 

GB838SU Cox Conical Surface Burr, Ø 6.0 

GB839SU Cox Round Surface Burr, Ø 6.0 

GB827R Guiding wire; nitinol 

Accessories 

GA411 Mobile stand for microspeed uni, 

adjustable height 

GD416M Mobile stand for Aesculap control units 

GA391SU Tubing set complete with adapter for spray nozzle 

and punch, for single use 

GA392SU Tubing set with Y-adapter, complete 

with adapter for spray nozzle and punch, for 

single use 

TE780 Power cord for Europe; 1.5 m 

TE730 Power cord for Europe; 5 m 

TE735 Power cord for USA, Canada, Japan; 5 m 

TE734 Power cord for UK; 5 m 

GB254R Eccos set for small bone surgery 

GB255R Eccos set for neurosurgery 

GB689R Eccos fixation for GD672 and GD673 

GB578R Eccos fixation for GD674, GD676, GD678, GD679 

GB579R Eccos fixation for GD684 

GB580R Eccos fixation for GD681, GD682 



26

Ordering information 

Control unit (power cord to be ordered separately) 

GD670 Control unit microspeed uni 

Motor cables 

GD672 microspeed uni motor cable 

GD673 microspeed uni motor cable with hand control 

Foot control switches 

GD668 microspeed uni foot control switch, one pedal 

GD671 microspeed uni foot control switch, two pedals 

Handpieces (suitable spray nozzle to be ordered separately) 

Hi-Line XS 

GB751R Hi-Line XS handpiece straight, 1 ring 



GB756R Hi-Line XS handpiece angled, 1 ring 



GB771R Hi-Line XS handpiece angled, 1 bold ring 



GB740R Hi-Line XS craniotome 

GB741R Hi-Line XS dura guard, 1 ring 



GB746R Hi-Line XS dura guard, steerable, 1 ring 



GB744R Hi-Line XS drill depth guard 

GB745R Hi-Line XS holding sleeve 

micro-Line 

GD450M micro-Line handpiece 1:1, for 70 mm burr, 

coding: 1 blue ring 


coding: 1 blue ring 


coding: 1 red ring 





Motors 

GD676 microspeed uni Hi 150 motor 

GD674 microspeed uni mini 100 motor 

GD675 microspeed uni XS high speed motor 

GD678 microspeed uni micro 150 motor 

GD681 microspeed uni shaver handpiece with hand 

control 

GD682 microspeed uni shaver handpiece 

GD684 microspeed uni mini pistol, 2.5 mm cannulated 

GD685 microspeed uni perforator driver 

mini-Line 

GB373R mini-Line angled drill attachm. for tools with 

dental shank 

GB374R mini-Line K-wire chuck, angled 

GB376R mini-Line burr attachment, for 2.35 mm shank 

GB382R mini-Line drill attachment, for tools with AO 

shank 

GB383R mini-Line drill attachment, Jacobs chuck, small 

GB377R mini-Line drill attachment, Jacobs chuck, large 

GB398R mini-Line K-wire chuck for GD684 

GB389R mini-Line drill attachment, for tools with 

hexagonal shank 

GB390R mini-Line sagittal saw attachment 

GB391R mini-Line reciprocating saw attachment 

GB392R mini-Line transversal saw attachment 

GB111 micro-Line handpiece 4:1, coding: 1 green ring 

GB119 Contra angle head 2:1, coding: 1 green dot, for 

tools with dental shank 

GD305 micro-Line reciprocating saw incl. blade GD320R 

GD307 micro-Line sagittal saw 

GB129 micro-Line sagittal saw 

GB130R micro-Line reciprocating saw 

GB300R Cranial perforator with Hudson shank, Ø 6 / 9 mm 



27

Aesculap AG | Am Aesculap-Platz | 78532 Tuttlingen | Germany 

Phone +49 (0) 74 61 95-0 | Fax +49 (0) 74 61 95-26 00 | www.aesculap.com 

Aesculap – a B. Braun company 

The main product mark ’Aesculap’ is a regis - 

tered mark of Aesculap AG. 

All rights reserved. Technical alterations are 

possible. This leaflet may be used in no way 

whatsoever other than for the offering, buying 

and selling of our products. 

No part may be copied or reproduced in any 

form. In the case of misuse we retain the right 

to recall our catalogues and pricelists and to 

take legal action. 

Brochure No. O28302 0510/1.5/4

Aesculap® microspeed uni - knoglemekanik.dk

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?