Leading Innovator of Advanced Seating & Restraint ... - EVS Ltd.

Leading Innovator of Advanced
Seating & Restraint Systems
Setting Industry Standards Since 1993
Emergency Vehicle Seating

Emergency Vehicle Seating
• Hi-Bac Child Safety Seat for uninjured
children between 20-50 pounds
• A streamline ABS seat back that provides
durability
• Molded foam back with lumbar support
that provides maximum comfort
• Available with 3, 4, 5 or 6-point belting
systems
Advanced Child Seats
Two Seats
in One!
Shown with
188-2 swivel base
EVS1880 EVS1870-05
EVS1887 Wall Mount
All EVS seats are also
available in a sewn version.
Setting the Standard
of Quality and Safety
Each EVS seat meets or exceeds the following standards:
• FMVSS 207
• FMVSS 210
• FMVSS 213 Child Seat
• FMVSS 208 for secondary seats in vehicles less than 10,000 GVW.
• Seamless to comply with Triple-K and OSHA standards for the
removal of blood-borne pathogens.
• GSA specified for use in government ambulances.
• All testing has been done by independent certified facilities.
• Copies of our test results are available upon request.
Regulation: Child seats should only be mounted forward- or rear-facing in the vehicle.
• For uninjured children between 20-50 lbs.
• Molded foam back with lumbar support
• A streamline ABS seat back provides durability
• Available in 3, 5 or 6 point belting
• Also available in a sewn version
Side
handles
• A removable seat back that has a
Hi-Bac Child Safety Seat built into it
• Ergonomically-correct removable
seat back
• Independent seat bottom that tracks 7 inches
• Gives you the flexibility to carry a second
transport
• Available with 3, 5, or 6-point, HMR or 6-point
Body Centering belting systems
• Seat back and bottom may be purchased
separately

Attendants Seats
EVS17803E
• Seamless construction for removal
of blood borne pathogens
• Light-weight construction
• Made to fit in confined spaces such
as Type II and Sprinter units
ADVANCED SEAT SPECIFICATIONS
EVS1780
49.5” Overall seat height (on base)
40” Seat height with track
26” Seat depth (from edge to wall)
18” Seat width
Built-in
Lumbar
Support!
EVS1780
• Ergonomically-correct seat back with
lumbar support
• Available with 3, 5, 6-point, HMR or
6 -point Body Centering belting systems
• Seamless construction for easy removal
of blood borne pathogens
• Streamline ABS seat back that provides
durability
EVS1880
49.5” Overall seat height (on base)
26” Seat depth (from edge to wall)
18” Seat width
Side
handles
Shown with
188-8 swivel base
(not to be used with
a child seat.)
EVS1787 Wall Mount
• Ergonomically-correct removable
seat back
• Independent seat bottom that
tracks 7 inches
• Gives you the flexibility to carry a
second transport
• Available with 3, 5, 6-point, HMR
or 6-point Body Centering belting
systems
ISO 9001:2008
EVS 1900
Executive
Captain’s Chair
Ultimate in Luxury
• Built for premium comfort
• Flexibility of design
• Perfect for long distance transports
• Extra lumbar support
Shown with a
2-point belt system
All EVS belt systems (2-, 3-, 4-, 5-, or
6-point) may be used with this seat.

Attendant Flip-up Seats
EVS1760
Shown with
186-8 swivel base
3-point belting meets FMVSS (USA)
and M-1 testing (Europe)
EVS1760-06
• Ergonomically-correct 3-point (1760) or 6-point (1760-06) seat
back with lumbar support
• Flip up seat bottom allows for more space
• Seamless constructive for easy removal of blood borne pathogens
• Streamline ABS seat back provides durability
• Can be mounted on 1865B or Ped Base
Mobility 1
Mobility 1 available
with any advanced
seating
• Allows access to equipment and patient
while remaining belted into the seat
• Place in any location to meet the needs of the EMT
• Up to 48” long track with locking increments every 4”
• Tested to meet or exceed all applicable FMVSS or
Triple-K standards
Position 1 – folded for backboard
EVS1790
EVS1769
• A tilt forward seat engineered to transport
a second patient
• Available with 3-point belting system
• Flip up seat bottom allows for more space
• Seamless construction
• Streamline ABS seat back provides durability
• When tilted forward one seat can handle
300 pounds
• A non-skid back surface has a quick and
easy-to-use tilt forward latch
• A tilt forward seat engineered
to transport a second patient
• Available with 3-, 5-point, HMR
or 6-point Body Centering belting
Position 2 – upright
systems
• A non-skid back surface
• When tilted forward one seat can handle 300 pounds
• Seat has a quick and easy-to-use tilt forward latch

Child/Attendant Flip-up Seat
EVS1860
• Hi-Bac Child Safety Seat for
uninjured children between
20-50 pounds
• Flip up seat bottom allows for
more space
• Seamless constructive for
easy removal of blood borne
pathogens.
• Streamline ABS seat back
provides durability.
• 3-point belting meets
M-1 testing (for Europe) 3-point belting
meets FMVSS
(for USA) and
M-1 testing
(for Europe)
EVS1800
• Seat within a seat for transporting
uninjured children* as well as adults.
• Easy. Convenient. Simply pull the
seat cushion forward and the child
restraint is ready for use.
• No “add-ons”. No assembly.
No set-up. No access or storage
problems.
STANDARD SEAT
SPECIFICATIONS
Standard Seats
Shown with SB-2
swivel base
EVS1850
• Hi-Bac Child Safety Seat for
uninjured children between
20-50 pounds
• Available in 2-point belting
• Molded foam back with lumbar
support that provides maximum
comfort
• 5 point belting for an uninjured
child
*Also available in a sewn version (EVS 1800)
EVS1850/1852
48” Overall seat height (on base)
28” Seat depth (from edge to wall) - EVS1850
24” Seat depth (from edge to wall) - EVS1852
18” Seat width
EVS1505
All seats are
available with a
6 or 12 degree back.
EVS1750
EVS1500
Shown with a
standard cabinet base
• Seamless construction for easy
removal of blood borne pathogens
• Molded foam back with lumbar
support that provides maximum
comfort
• Heavy duty double locking slide
track and release bar
EVS1750/1752
48” Overall seat height (on base)
38” Seat height with track
28” Seat depth (from edge to wall) - EVS1750
24” Seat depth (from edge to wall) - EVS1752
18” Seat width
EVS1500 Series
• A 3-piece seamless
cushion set
• Available with 3-point
(1503), 5-point (1505),
6-point (1506), HMR or
Stabilizer belting systems
• Seats may be used in
lieu of a squad bench
or in the CPR location
EVS17407
• Molded foam back
• Heavy duty sewn construction
• Industrial-strength double-locking
slide
• Belt attached to track
All of our seats
have seamless
construction for
easy removal of
blood borne
pathogens.

1
There’s
only one
choice
for
seating
safety
Emergency Vehicle Seating
Accessories & Rep
Bases
Cabinet Base
• Available for use with all EVS seats
• Base may be mounted forward or
rear-facing
• Converts to lock box to secure drugs
CBH Heater Base
• Tall heater base
• For use with EVS standard seats only
CBDL Locking
Cabinet Base
• For use with Standard and Advanced
EVS seating
• Available without lock or with lock to
secure drugs
CBPED / CBPEDR Base
• To be used exclusively with the
1780, 1780E and 1880 seats
• Compact base – for confined spaces
• CBPED (without track)
• CBPEDR (with track)
SB 186-8S Base
SB175 Base
Patented
Design
• Used with 1760 seat only
• 8 positions
• Made to fit in confined spaces
• Seat can be mounted to base
on left, right or center sides
• For use with 1750 seat only
• 9" tall base
• Two positions
SB-8S Mini Base SB-2 or SB-8
• 3.5" tall base with 8-position
locking
• Use with 1780/1790
• Ideal for wheel well areas
CBPED 1760/1860 Base
• Used with 1760/1860
attendant seats
• Seat may be mounted to base
on left, right or center sides.
SB 186-8 Base
• Lightweight base that meets or
exceeds FMVSS, including M1
(UK) standards
• 8-position locking mechanism
• Patented design
• Space-saving in tight locations
such as around wheel wells
3-1/2” height
SB 186-8WWM Base
• Used with 1760 seat only
• 8 positions
• Made to fit in confined
spaces
• Seat can be mounted to base
on left, right or center sides
• SB-2: Two-position base for
child seats
• SB-8: Eight-position base for
non-child seats
• Patented design for maximum
strength
• Conveniently-located release handle
for easy positioning
All EVS
products are
suitable for
OEM, Remount
or Aftermarket.

lacement Products
Belts
*BAE Belt colors
available upon request
2 pt. Belt
5 pt. Belt *
Body Centering Belt
Arms
Vac Form Arm Molded Arm
*All BAE belts are nano-coated for prevention of
permeation of blood-borne pathogens.
Any of these belts may be purchased for use in squad
bench area.
3 pt. Belt
6 pt. Belt
HMR Belt *
1900 Arm
Cobalt
Gunmetal
Ash
Sage
Wedgewood
Royal
Desert Rose
Vinyl
Colors
• Additional custom and contract colors are
available
• We purchase from all major vinyl manufacturers
• If a custom color is desired, we can work with
all ambulance manufacturers to meet your
color needs
Though the color swatches shown on this printed piece are very close to the
actual vinyl colors, they are not intended to be used as an exact color match.
Custom
Cushions
& Headers
Vinyl colors available to match all seating
products – call for more details

Our Products have no seams ...
therefore, No Migration.
What does this mean?
Two government agencies, OSHA and GSA have set
guidelines for the migration of blood-borne pathogens to
EMS personnel and the people they serve. This guideline
recommends the use of seamless construction wherever
the ambulance attendant comes in contact with the
seating product when in use, therefore minimizing the
migration of dangerous pathogens.
Vinyl Color Coordinates
Seamless seats and cushions require a special heavy-duty
vinyl. We can assist you to coordinate the color of your
seating vinyl with an upholstery-grade vinyl. This upholstery-grade
vinyl is available in cut yardage and is ideal
for covering door panels and cabinet trim.
Specifications Cleanability
Width 54” minimum
Roll Length medi+VAC - 20/25 yards
Companion II - 30/35 yards
Weight medi+VAC - 60 oz.
Companion II - 32 oz.
Cold Crack -20˚F (-29˚C)
Flammability California Fire Regulation
(Bulletin 117, Sec)
Automotive (FMVSS-302)
BIFMA (Screen Test, Sec. 4.6.1.1)
Boston Fire Code (BFD IX-1)
CID A-A-2950-A
Port Authority of NY and NJ
Durability Medi+VAC and Companion II with advanced
medi+GARD exceeds the industry accepted
Wyzenbeek test standard for abrasion.
Antimicrobial Each vinyl with advanced medi+GARD provides
outstanding protection in difficult emergency
vehicle environments.
Disinfectability Both vinyls with advanced medi+GARD
have been formulated to achieve a
superior level of disinfectability using
products containing sodium hypochlorite
(common household bleach) diluted 1:10.
ISO 9001:2008
Made with pride in the USA.
Cleaning is made easy with E.V.S., Ltd’s selection of vinyls and their
advanced medi+GARD protective finish. While staining and soiling
from bodily fluids are common in the harsh environment of
ambulances, the manufacturer’s sulfide stain-resistant formulation
allows most to be removed using the following method:
Step 1: Light Soiling
Clean with warm water and liquid cleaner such as
Formula 409 ® Cleaner and Degreaser or an
equivalent cleaner with a sponge or soft cloth.
Step 2: Heavy Soiling.
Clean with a soft white cloth dampened with lighter
fluid (naphtha). Rub gently and rinse with a waterdampened
cloth.
Step 3: Bodily Fluid Stains.
Clean with a soft white cloth with a solution of
household bleach (sodium hypochlorite);
10% bleach, and 90% water. Rub gently then rinse
with a water-dampened cloth to remove bleach
concentrate.
USA
3702 West Sample Street
South Bend, Indiana 46619
Local and International:574.233.5707
OEM and Aftermarket:800.364.3218
Fax:574.288.9363
E-mail: evssales@evsltd.com
EVS EUROPE LTD.
Unit 1, Chilford Court, Rayne Road
Braintree , Essex CM7 2QS, England
Tel: 44 (0) 1376 552399
Fax: 44 (0) 1376 552411
Email: enquiries@evseurope.com
400_10-11