CHORUS ONE - KAPCSOLO.COM

CHORUS - HOME AUTOMATION
WIRELESS SYSTEMS - COMMAND AND CONTROL
GW10851
OUTPUT MODULES FOR GENERAL LOADS
GW14821
GW10822
OUTPUT MODULES FOR ENGINE COMMAND
GW10823
144
TWO-WAY WIRELESS OPERATED TIMED THERMOSTAT - WALL-MOUNTING - BATTERY-POWERED
Code Temperature Colour RF range Dimensions Pack
adjustment in free field LxHxD (mm) Carton
GW 10 851 From +5˚C to +40˚C White 100 m 130x92x23 mm 1
GW 14 851 From +5˚C to +40˚C Titanium 100 m 130x92x23 mm 1
CHARACTERISTICS: powered by three 1.5V AAA alkaline batteries, not included. Average battery duration: 1 year.
To be used with the 1-channel, 3A and 16A wireless actuators. The two-way connection is used to communicate with the GSM
repeater interface GW90822 which (in combination with the GSM repeater GW90821
and via text messages) allows you to set the function (heating/air-conditioning) and the mode (automatic/manual/OFF).
It is also possible to receive (via text messages and on the pre-set telephone number) the current room temperature measured, the current SET POINT
temperature, and the functions and modes currently activated.
NOTES: includes wall-mounting kit, containing: two strips of double-sided adhesive tape, two ø 6mm wall plugs with screws.
1-CHANNEL 3A ACTUATOR, WIRELESS OPERATED
Code Power supply No. output RF range Output No. modules Pack
voltage channels in free field contacts Chorus Carton
COLOUR: WHITE
GW 10 821 230V ac - 50 Hz 1 100 m 3A(AC1)/2A(AC15) 250V ac 1 1
COLOUR: BLACK
GW 12 821 230V ac - 50Hz 1 100 m 3A(AC1)/2A(AC15) 250V ac 1 1
COLOUR: TITANIUM
GW 14 821 230V ac - 50Hz 1 100 m 3A(AC1)/2A(AC15) 250V ac 1 1
CHARACTERISTICS: insert to be positioned in the supports of the Chorus range, to be used with the RF command devices of the range. Integrated command button key.
1-channel actuator to activate loads via the output contact (NO) with 230V potential.
Not suitable for directly commanding fluorescent-type lamps.
NOTES: input equipped with L = 200mm x 0.75mm 2 cable to connect traditional device contacts, in order to have a local command of the outputs.
1-CHANNEL 16A ACTUATOR, WIRELESS OPERATED
Code Power supply No. output RF range Output No. modules Pack
voltage channels in free field contacts Chorus Carton
COLOUR: WHITE
GW 10 822 230V ac - 50 Hz 1 100 m 16A(AC1)/10A(AC15) 250V ac 2 1
COLOUR: BLACK
GW 12 822 230V ac - 50Hz 1 100 m 16A(AC1)/10A(AC15) 250V ac 2 1
COLOUR: TITANIUM
GW 14 822 230V ac - 50Hz 1 100 m 16A(AC1)/10A(AC15) 250V ac 2 1
CHARACTERISTICS: insert to be positioned in the supports of the Chorus range, to be used with the RF command devices of the range. Integrated command button key.
1-channel actuator to activate loads via the potential-free output contact (NO).
Suitable for commanding fluorescent lamps with a maximum current of 4A.
NOTES: input equipped with L = 200mm x 0.75mm 2 cable to connect traditional device contacts, in order to have a local command of the outputs.
1-CHANNEL 8A ACTUATOR, WIRELESS OPERATED
Code Power supply No. output RF range Output No. modules Pack
voltage channels in free field contacts Chorus Carton
COLOUR: WHITE
GW 10 823 230V ac - 50 Hz 1 100 m 8A(AC1)/3A(AC15) 250V ac 2 1
COLOUR: BLACK
GW 12 823 230V ac - 50Hz 1 100 m 8A(AC1)/3A(AC15) 250V ac 2 1
COLOUR: TITANIUM
GW 14 823 230V ac - 50Hz 1 100 m 8A(AC1)/3A(AC15) 250V ac 2 1
CHARACTERISTICS: insert to be positioned in the supports of the Chorus range, to be used with the RF command devices of the range.
Integrated command button key. 1-channel actuator to activate a motor to move roller-shutters, curtains, Venetian blinds, rolling blinds, etc.
via an output contact (NO) with 230V potential.
NOTES: input equipped with L = 200mm x 0.75mm 2 cable to connect traditional device contacts, in order to have a local command of the outputs.
CHORUS CATALOGUE 2007 > EURODOMO > DOMOTICS > CHORUS - HOME AUTOMATION
TECHNICAL CHARACTERISTICS FROM PAGE 236