Attix 19 Flood Sucker - Industrial Vacuum Blog

Attix 19 AE
Flood Sucker: The
Revolution in
Water Evacuation

The Attix 19 AE FLOOD SUCKER:
the Ultimate Sump Pump Vacuum
The Attix 19 AE Flood Sucker from Nilfisk-ALTO picks up nearly one gallon of water per second and has a
built-in, automatic discharge that operates simultaneously with the vacuum. It is ideal for flood
restoration companies, abatement contractors, fire departments and municipalities.
This sump pump vacuum separates solids into a stainless-steel basket inside the canister while liquids are
simultaneously discharged through a standard 1.5-inch fire hose. The powerful discharge pump is
capable of pumping water up to 30 feet vertically and 150 feet
horizontally.
Where ordinary sump pumps leave up to 1.5 inches of liquid on the
ground, the Flood Sucker completely removes liquids, leaving a dry
surface behind.
This unit is effective in helping flood-stricken customers clean and dry
their damaged carpets, floors, basements and more. It cuts man hours
by eliminating the time-consuming task of manually dumping
the vacuum canister.
This machine can be operated in three modes--vacuum
only, pump only (which allows you to trap liquids and
pump them separately), or simultaneous vacuum and
pump.
The Attix 19 Flood Sucker automatically discharges collected
water.
Distributed by:
Ideal for flood restoration companies,
abatement contractors, fire
departments and municipalities.
Technical Specifications
Part # M60004
Power, HP 1.6
Power Peak, HP 8.5
Air Flow, cfm 140
Water Lift, in. 105
Noise Level, dB(A) 57
Container Vol., gal. 19
L x W x H, in. 24 x 23 x 38
Shipping Weight, lbs. 97
Machine Includes:
Hose (dia x length) in. x ft. 1.5’ x 13”
Curved Wand Stainless Steel
Extension Tubes Stainless Steel
Industrial Squeegee Nozzle Yes
Discharge Hose (length), ft. 25’
Cable Hook Yes
Soft Start Yes
Nilfisk-Advance America, Inc., 740 Hemlock Road, Suite 100, Morgantown, PA 19543
1-800-645-3475 • questions@nilfisk.com • www.NilfiskALTOVacuums.com