9362645a, Users Guide DVB Satellite Receiver UFD 506 ... - Kathrein

Foreword
Foreword
Important notes
Dear customer,
This User's Guide is designed to help you to use the extensive functions
of your new satellite receiver most effectively.
We have made every effort to make the instructions as clear and understandable
as possible and to keep them as short as necessary.
You will find a small glossary of terms at the end of the User's Guide
to facilitate understanding of certain technical expressions that do not
lend themselves to translation.
We have designed the power switch specifically with the environment
in mind. Therefore, in order to save electricity, disconnect your receiver
from the mains if you will not be watching TV for a longer period
of time. For shorter periods you can switch the receiver to standby
with the remote control to reduce power consumption to a minimum.
We wish you the very best reception and great pleasure with your new
DVB Sat receiver.
Your
KATHREIN Team
Should you, contrary to all expectations, experience problems with
your receiver, please contact your dealer.
Changes keep on being made with regard to the channel arrangement
of the satellites and transponders. Accordingly it is necessary in such
cases to reset the channel settings, although the pre-programming in
the factory always corresponds to the latest status. You can take the
information for this new setting from the SAT.1 video text, from the
Internet or the corresponding periodicals.
Your receiver was equipped ex works with the latest software in each
case. However, we are constantly endeavouring to adapt the software
to the wishes of our customers and the state of the art. You will find
further information about this in the “Software and channel list update”
section.
Please keep the original packaging for possible return shipment!
The UFD 506 is intended only for free
channels - no CI shaft!
The UFD 516 CI receives free and encrypted
channels (page 34).
3