Powder Free Latex Glove, Polymer Coated MATERIAL SAFETY ...

Powder Free Latex Glove, Polymer Coated
MATERIAL SAFETY DATA SHEET
SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: Powder Free Latex Glove, Polymer Coated
COMPANY NAME: DEK INTERNATIONAL, GmbH
ADDRESS: Geroldstrasse 28
PO Box 240
CH-8037 Zurich
Switzerland
TELEPHONE NUMBER +41 1 274 80 20
FAX NUMBER +41 1 274 80 22
Product Name: Powder Free Latex Glove, Polymer Coated (MG09 and MG12)
Chemical Family: Natural Rubber Latex (biodegradeable).
Packaged By: QRP Corporation, 3850 East 44 th Street, Tucson, AZ 85713
Emergency Telephone: +(520) 790-3533
SECTION 2: COMPOSITION / INFORMATION ON INGREDIENTS
All chemicals are non-toxic/non-hazardous
The chemicals listed are:
ZDBC Zinc dibutyl dithiocarbamate
ZMBT Zinc mercaptobenzothiazole
KOH Potassium hydroxide
WINGSTAY – L Butylated reactive product of p-cresol and dicyclopentadiene
SULPHUR
ZnO Zinc Oxide
TiO2 Titanium dioxide
Polymer Coating
SECTION 3: HAZARDS INDENTIFICATION
All chemicals are non-toxic/non-hazardous
SECTION 4: PHYSICAL DATA
Dimensions Small Medium Large Extra Large
Length (mm) minimum 300±10 300±10 300±10 300±10
Width (mm) 81-90 91-100 101-111 112-118
Thickness (mm)
Finger 0.18± -0.03 0.18± -0.03 0.18± -0.03 0.18± -0.03
Palm 0.15± -0.03 0.15± -0.03 0.15± -0.03 0.15± -0.03
Cuff 0.12± -0.03 0.12± -0.03 0.12± -0.03 0.12± -0.03
Physical Appearance Roll beaded cuff, gloves are white in color. Palm surface could be smooth or textured

SECTION 5: STABILITY & REACTIVITY
Tensile Properties Aged Unaged
Tensile Strength (Mpa) minimum 14 14
Ultimate Elongation (%) minimum 700% 500%
SECTION 6: Quality Assurance Conformity
Conformity: ASTM D 6124-97
ASTM D 5712-95
ASTM D 3578-99
ASTM F 1671-97
EN 455 Parts 1 & 2
FDA 100ml Watertight Test
SECTION 7: ECOLOGICAL INFORMATION
Bio-Compatibility: The chemical formulation of the gloves and surface lubricating materials do not contain any
substances normally known to be harmful to the user or to any person with whom the gloves
contact.
SECTION 8: DISPOSAL CONSIDERATION
Product is non-hazardous, non-toxic, and biodegradable
SECTION 9: TRANSPORTATION INFORMATION
No special requirements
SECTION 10: REGULATORY INFORMATION
None known
SECTION 11: OTHER INFORMATION
To prolong product life, gloves should be stored in a cool, dry location, located away from sources of heat and light.
The data in this Material Safety Data Sheet relates to the specific material designated herein and does not relate to the use in
combination with other material or in any process.