IVV 1054 and IME 1500 - Modul technik

Technical Data und Instructions Country-specific design
IVV 1054 und IME 1500 (on request)
electric-sockets
Classification conventional ballast
IIb connection diameter
Nominal voltage/Nominal frequency
outlet points for med. gases
Electrical Data sizing of pipe diameters
Nominal voltage: 230 V (400V) AC operating pressure
Nominal frequency: 50 Hz signal current technology/nurse call
Operating mode: continuous operation
Protection class: Protection class 1
Type of protection: closed design Installation
Heavy current connection:
For the connecting of the cables (on site) there are
screw less connectors for cables of up to 2.5 mm².
The following connection possibilities for potential
compensation with a protective connector block are at
your disposal:
The medical supply system, types IVV 1054
and IME 1500, must be mounted on solid
walls and on light-weight partitions using
appropriate fastening materials. With light-
weight partitions, a suitable substructure
must be provided.
1 x max. 16 mm²
n x max. 4 mm²
Night light TC 7 Watt
Nominal voltage: 230 V AC
Nominal frequency: 50 HZ
Connection type: Connectors with spring hold
Connection diameter: single wire/fine strand 1,5 mm²
Cleaning
The IVV 1054 and IME 1500-systems can be
cleaned with all standard cleaning agents and
can be disinfected with all alcohol-free
disinfection liquids.
The surface is coated with a high quality
electro static powder coating. Smooth
surfaces are made of electrically-oxidized
Aluminium and chrome-nickel steel. The
plastic parts are cleaning and disinfection
Operating pressures for med. gases
liquid proof.
(outlet points in accordance with
DIN EN 737-1, -3, -4)
Oxygen:
Compressed air:
Nitrous oxide:
Vacuum:
AGSS:
5 bar
5 bar
5 bar
- 0,8 bar
5 bar
Maintenance and Repair
System maintenance should be carried out
after 5 years and every 2 years thereafter. If
desired, a customer service agreement can
be drawn up at a later date.