IRIS - VCE
IRIS - VCE
IRIS - VCE
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
PROJECT INFORMATION:<br />
D11-1<br />
ANNEX C<br />
Project Title: INTEGRATED EUROPEAN INDUSTRIAL RISK<br />
Acronym: <strong>IRIS</strong><br />
REDUCTION SYSTEM<br />
Contract N°: CP-IP 213968-2 Project N°: FP7-NMP-2007-LARGE-1<br />
Project Start: 01 October 2008 Project End: 31 March 2012<br />
REPORT INFORMATION:<br />
Report Title: WP3 DEMONSTRATION REPORT – ANNEX C<br />
Date of Issue: July 2009<br />
Rep. Period: 01 October 2008 – 30 September 2009<br />
Prepared by: <strong>VCE</strong> Holding GmbH<br />
Authors: Wenzel, Helmut<br />
Veit-Egerer, Robert<br />
Widmann, Monika<br />
coordinating person:<br />
organisation:<br />
e-mail:<br />
fax:<br />
telephone:<br />
Dr. Helmut Wenzel<br />
<strong>VCE</strong> Holding GmbH<br />
wenzel@vce.at<br />
+43-1-893 86 71<br />
+43-1-897 53 39<br />
Iris Demonstration Report – Annex C page 1 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Trend analyses in terms of structural stiffness<br />
The present document contains detailde trend analyses and is subdiveded into the<br />
following components:<br />
Trend of stiffness in terms of time over the whole measurment periode (10th of<br />
Dec 2008, 05:16 pm – 13th of Dec 2008, 11:15 am) based on files with a length<br />
of 22 min<br />
Trend of stiffness in terms of time – pier settlement – based on 330 s files<br />
Trend of stiffness in terms of time – cutting through tendons - based on 330 s<br />
files<br />
Sensor E102 Sensor E103<br />
Iris Demonstration Report – Annex C page 2 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: vertical<br />
Frequency range: 0.2-75 Hz<br />
4 th tendon partially intersected<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
Iris Demonstration Report – Annex C page 3 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: vertical<br />
Frequency range: 0.2-20 Hz<br />
4 th tendon partially intersected<br />
time<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
frequency<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
1BT main span<br />
1TL main span 2BT main span<br />
2TL main span<br />
1BT side span<br />
Iris Demonstration Report – Annex C page 4 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: vertical<br />
Frequency range: 0.2-8 Hz<br />
4 th tendon partially intersected<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
Iris Demonstration Report – Annex C page 5 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: vertical<br />
Frequency range: 45-75 Hz<br />
4 th tendon partially intersected<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
Iris Demonstration Report – Annex C page 6 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: vertical<br />
Frequency range: 20-50 Hz<br />
4 th tendon partially intersected<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
Iris Demonstration Report – Annex C page 7 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: vertical<br />
Frequency range: 0.2-100 Hz<br />
4 th tendon partially intersected<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
Iris Demonstration Report – Annex C page 8 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: vertical<br />
Frequency range: 100 - 200 Hz<br />
4 th tendon partially intersected<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
Iris Demonstration Report – Annex C page 9 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: vertical<br />
Frequency range: 45 - 80 Hz<br />
4 th tendon partially intersected<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
Iris Demonstration Report – Annex C page 10 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: vertical<br />
Frequency range: 80 - 145 Hz<br />
4 th tendon partially intersected<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
Iris Demonstration Report – Annex C page 11 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: vertical<br />
Frequency range: 145 – 200 Hz<br />
4 th tendon partially intersected<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
Iris Demonstration Report – Annex C page 12 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: cross<br />
Frequency range: 0.2-100 Hz<br />
4 th tendon partially intersected<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
Iris Demonstration Report – Annex C page 13 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: cross<br />
Frequency range: 0.2-20 Hz<br />
4 th tendon partially intersected<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
Iris Demonstration Report – Annex C page 14 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: cross<br />
Frequency range: 20 - 50 Hz<br />
4 th tendon partially intersected<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
Iris Demonstration Report – Annex C page 15 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: cross<br />
Frequency range: 100 - 200 Hz<br />
4 th tendon partially intersected<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
Iris Demonstration Report – Annex C page 16 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: cross<br />
Frequency range: 45 - 80 Hz<br />
4 th tendon partially intersected<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
Iris Demonstration Report – Annex C page 17 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: cross<br />
Frequency range: 80 - 145 Hz<br />
4 th tendon partially intersected<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
Iris Demonstration Report – Annex C page 18 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: cross<br />
Frequency range: 145 - 200 Hz<br />
4 th tendon partially intersected<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
Iris Demonstration Report – Annex C page 19 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: whole measurment periode<br />
Sensor: E102<br />
Direction: cross<br />
Frequency range: 190 - 250 Hz<br />
4 th tendon partially intersected<br />
3 d tendon intersected<br />
2 nd tendon intersected<br />
1 st tendon intersected<br />
End of damage test<br />
lowering the pier<br />
Compensating plates inserted<br />
3 d step of lowering<br />
2 nd step of lowering<br />
1 st step of lowering<br />
Second cut<br />
is finished<br />
Start of cutting<br />
through the pier<br />
Iris Demonstration Report – Annex C page 20 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Trend of stiffness in terms of time – Pier settlement<br />
Analysed period: pier settlement<br />
Sensor: E102<br />
Direction: vertical<br />
Frequency range: 0.2 - 250 Hz<br />
Frequency range: 0.2 - 6 Hz<br />
Frequency range: 6 - 14 Hz<br />
Iris Demonstration Report – Annex C page 21 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: pier settlement<br />
Sensor: E102<br />
Direction: vertical<br />
Frequency range: 14 - 45 Hz<br />
Frequency range: 45 - 75 Hz<br />
Frequency range: 75 - 250 Hz<br />
Iris Demonstration Report – Annex C page 22 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: pier settlement<br />
Sensor: E102<br />
Direction: cross<br />
Frequency range: 0.2 - 250 Hz<br />
Frequency range: 0.2 - 6 Hz<br />
Frequency range: 6 - 14 Hz<br />
Iris Demonstration Report – Annex C page 23 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: pier settlement<br />
Sensor: E102<br />
Direction: cross<br />
Frequency range: 14 - 45 Hz<br />
Frequency range: 45- 75 Hz<br />
Frequency range: 75 - 250 Hz<br />
Iris Demonstration Report – Annex C page 24 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: pier settlement<br />
Sensor: E103<br />
Direction: vertical<br />
Frequency range: 0.2 - 250 Hz<br />
Frequency range: 0.2 - 6 Hz<br />
Frequency range: 6 - 14 Hz<br />
Iris Demonstration Report – Annex C page 25 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: pier settlement<br />
Sensor: E103<br />
Direction: vertical<br />
Frequency range: 14 - 45 Hz<br />
Frequency range: 45 - 75 Hz<br />
Frequency range: 75 - 250 Hz<br />
Iris Demonstration Report – Annex C page 26 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: pier settlement<br />
Sensor: E103<br />
Direction: cross<br />
Frequency range: 0.2 - 250 Hz<br />
Frequency range: 0.2 - 6 Hz<br />
Frequency range: 6 - 14 Hz<br />
Iris Demonstration Report – Annex C page 27 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: pier settlement<br />
Sensor: E103<br />
Direction: cross<br />
Frequency range: 14 - 45 Hz<br />
Frequency range: 45 - 75 Hz<br />
Frequency range: 75 - 250 Hz<br />
Iris Demonstration Report – Annex C page 28 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Trend of stiffness in terms of time – Cutting through tendons<br />
Analysed period: cutting through tendons<br />
Sensor: E102<br />
Direction: vertical<br />
Frequency range: 0.2 - 250 Hz<br />
Frequency range: 0.2 - 6 Hz<br />
Frequency range: 6 - 14 Hz<br />
Iris Demonstration Report – Annex C page 29 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: cutting through tendons<br />
Sensor: E102<br />
Direction: vertical<br />
Frequency range: 14 - 45 Hz<br />
Frequency range: 45 - 75 Hz<br />
Frequency range: 75 - 250 Hz<br />
Iris Demonstration Report – Annex C page 30 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: cutting through tendons<br />
Sensor: E102<br />
Direction: cross<br />
Frequency range: 0.2 - 250 Hz<br />
Frequency range: 0.2 - 6 Hz<br />
Frequency range: 6 - 14 Hz<br />
Iris Demonstration Report – Annex C page 31 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: cutting through tendons<br />
Sensor: E102<br />
Direction: cross<br />
Frequency range: 14 - 45 Hz<br />
Frequency range: 45 - 75 Hz<br />
Frequency range: 75 - 250 Hz<br />
Iris Demonstration Report – Annex C page 32 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: cutting through tendons<br />
Sensor: E103<br />
Direction: vertical<br />
Frequency range: 0.2 - 250 Hz<br />
Frequency range: 0.2 - 6 Hz<br />
Frequency range: 6 - 14 Hz<br />
Iris Demonstration Report – Annex C page 33 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: cutting through tendons<br />
Sensor: E103<br />
Direction: vertical<br />
Frequency range: 14 - 45 Hz<br />
Frequency range: 45 - 75 Hz<br />
Frequency range: 75 - 250 Hz<br />
Iris Demonstration Report – Annex C page 34 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: cutting through tendons<br />
Sensor: E103<br />
Direction: cross<br />
Frequency range: 0.2 - 250 Hz<br />
Frequency range: 0.2 - 6 Hz<br />
Frequency range: 6 - 14 Hz<br />
Iris Demonstration Report – Annex C page 35 of 36
<strong>IRIS</strong> FP7-NMP-2007-LARGE-1<br />
Analysed period: cutting through tendons<br />
Sensor: E103<br />
Direction: cross<br />
Frequency range: 14 - 45 Hz<br />
Frequency range: 45 - 75 Hz<br />
Frequency range: 75 - 250 Hz<br />
Iris Demonstration Report – Annex C page 36 of 36
Change language