System MSD-V
System MSD-V
System MSD-V
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
www.mol-elastomer.de<br />
PROFESSIONAL RUBBER SEALINGS<br />
FOR SEWAGE APPLICATIONS<br />
<strong>System</strong> <strong>MSD</strong>-V<br />
Pre-lubricated wedge seal<br />
for concrete manholes<br />
S E A L S F O R CO N C R E T E P I P E S<br />
Reliable connection guaranteed in compliance<br />
with DIN EN 1917 and DIN V 4034-1<br />
Meets the requirements of DIN EN 681-1<br />
and FBS quality guideline QR 4060
The pre-lubricated M.O.L. concrete pipe seal system <strong>MSD</strong>-V is designed for<br />
concrete shafts and guarantees a reliable connection in compliance with<br />
DIN EN 1917 and DIN V 4034-1. The <strong>MSD</strong>-V seal also fulfils the requirements<br />
of DIN EN 681-1 and the FBS quality guideline QR 4060 ® .<br />
Material: seal is made of SBR (styrene-butadiene rubber) which is ideal<br />
for use in sewage systems and complies with the requirements of the<br />
DIN EN 681-1 WC 40 (hardness 40 ± 5 IRHD).<br />
The <strong>MSD</strong>-V seal is tested and inspected for quality by MPA NRW<br />
(Dortmund).<br />
Dimensions / Technical data<br />
PROFESSIONAL RUBBER SEALINGS<br />
FOR SEWAGE APPLICATIONS<br />
Art. No. DN h j b w<br />
75075 800/1000 19,5 +0,6 / -0,2 28,8 ± 1,5 11,5 ± 1,5<br />
75076 1200 23 +0,8 / -0,2 32,4 ± 1,5 13,5 ± 2,0<br />
75077 1500 27 +0,8 / -0,3 38,0 ± 1,5 16,0 ± 2,5<br />
Other profiles upon request (all dimensions in mm).<br />
M.O.L. Gummiverarbeitung GmbH & Co. KG<br />
Gutenbergstraße 12 –14 | 49377 Vechta | Germany | Phone: +49 4441 9245- 0 | Fax: +49 4441 7152 | Email: info@mol-elastomer.de | Internet: www.mol-elastomer.de<br />
dso<br />
Pre-lubricated<br />
sliding pouch<br />
Notes on installation: the socket and the spigot should be in a clean<br />
condition. Pull the <strong>MSD</strong>-V seal onto the spigot of the shaft ring so that<br />
the sliding coat of the seal points outwards.<br />
Load transfer: When installing shaft structures, suitable load compensation<br />
(e.g. with a fresh layer of concrete) should be used.<br />
Pre-lubricated sliding pouch<br />
With regard to the material properties given in the tables and diagrams we only guarantee the figures required by the relevant standards. Our product information is supplied to the best of our<br />
knowledge. However, we do not accept any legal liability for the contents. Moreover our General Terms and Conditions of Sale dated 05 / 2008 shall apply.
Change language