You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Q: How have the features of<br />
<strong>OTS</strong> evolved to offer process<br />
advantages o ver existing<br />
clamp types?<br />
Clamp System Feature Foil Clamps<br />
Q: What is the difference<br />
between manual O TS and<br />
software controlled O TS?<br />
A: Manual <strong>OTS</strong><br />
Uses manually adjusted valves<br />
to set the clamp pressure and<br />
the snug pressure. These valves<br />
are accessible behind the cover<br />
in the same location as the<br />
“Board Clamp Regulator”. These<br />
pressures will need to be set up<br />
with every product change over.<br />
Software Controlled O TS<br />
Uses software controlled valves<br />
to set the clamp pressure and<br />
the snug pressure. The settings<br />
for these valves is accessible<br />
via the touch screen display. The<br />
pressure setting is saved in the<br />
product file, so the pressures<br />
only need to be adjusted for the<br />
first setup. Future runs of the<br />
same product file will use the<br />
same pressure settings.<br />
Q: Can <strong>OTS</strong> be used with<br />
Grid-Lok ® ?<br />
A: Yes, <strong>OTS</strong> can be used with all<br />
types of tooling; there is no<br />
impact on the tooling.<br />
ASIA: Singapore: +65 6484 7010, China: +86 755 2759 9188, Malaysia: +604 644 2177, Taiwan: +886 3313 8155, India: +91 984 0386 452<br />
EUROPE: Northern Europe: +44 1305 760760, Western Europe: +49 6101 5227-0, Central Europe: +36 96 512 100, Benelux: +31 499 573 55412 100<br />
AMERICAS: Central: +1 847 368 1155, Eastern: +1 908 797 9368<br />
Foiless<br />
Clamps<br />
Snugger <strong>OTS</strong><br />
Side Snugging of board ˚ ˚ <br />
Automatic adjust for<br />
product thickness<br />
Board pulled flat<br />
to tooling<br />
Articulated Compliant<br />
Snugger<br />
Printing at the edge<br />
of the board<br />
<br />
<br />
˚<br />
˚<br />
˚<br />
˚<br />
˚<br />
<br />
˚<br />
˚<br />
˚<br />
<br />
Q: What impact does O TS have<br />
on Dual Lane machines?<br />
A: The <strong>OTS</strong> system occupies<br />
space behind the printing rail.<br />
This means that all <strong>OTS</strong> Dual<br />
Lane systems will have 72.5mm<br />
dead space between the board<br />
edges. This is identical to the<br />
current RTC specification, but is<br />
larger than the standard rail<br />
specification.<br />
www.dek.com<br />
<br />
<br />
<br />
<br />
Knowhow... Know DEK<br />
...Know the Difference
Change language