Red Hot Price Rollback - CPC

Red Hot Price Rollback
Multi-Network
Cable Tester
A quick network cable
tester to verify the
correct wiring,
continuity and
polarisation of
BNC Ethernet
coaxial cables and 10-
Base-T(UTP/STP), EIA/TIA-568B, 356A
and Token ring modular RJ45 network cables. By using
the remote terminator, the unit allows cables to be
tested before and after installation. Powered by 1x 9V
PP3 type battery - not supplied.
• Tests BNC Ethernet cabling
• Tests 10-Base-T(UTP/STP), EIA/TIA-568B, 258A and
Token ring cabling
• Test ground shielding
• LEDs indicate the status and connections of the
cables
• Supplied with soft carry case 515230
IN0174606 Multi-Network Cable £7.95
BT0008206 Battery £0.82
Enhanced
Network Cable Tester
A quick network cable
tester to verify the
correct wiring,
continuity and
polarisation of 10-
Base-T(UTP/STP),
EIA/TIA-568B,
356A and Token
ring modular RJ45
network cables. By using
the remote terminator, the unit allows cables to be
tested before and after installation.
Powered by 1x PP3 type battery - not supplied.
• Test 10-Base-T(UTP/STP), EIA/TIA-568B, 356A and
Token ring cabling
• LEDs indicate the status and connections of the
cables
• Tests shielding
• Supplied with soft carry case 451046
IN0174806 Enhanced network cable £7.95
BT0008206 Battery £0.82
Multi-Modular
Cable Tester
A quick network cable
tester to verify the
correct wiring and
miss/cross wiring of
most RJ45, RJ-12
and RJ-11 USOC
modular cabling
systems. Powered
by 1x 9V PP3 type
battery - not supplied.
• Auto scanning
• Tests USOC 4, 6 and 8 cables
• Can also be used for testing the cable is crossed
wired or wired straight through
• Red and green LEDs indicate correct or incorrect
wiring
• Supplied with soft carry case
482906
IN0174706 Multi tester £8.95
BT0008206 Battery £0.82
Mini Digital Clamp
Meter
• Large 4000 count LCD display
• 1mA, high resolution
• Wide measuring range from small to
large currents
• Diode check and Continuity buzzer
• 12.5mm jaw capacity
• Data Hold and Max hold functions
• Auto power off
• Safety Category: CATIII 600V
£36.95
order code IN0526806
All Prices Exclude VAT
104
Range Basic Accuracy
Best
Resolution
DC Current 4A, 80A ±(2.5%+4d) 1mA
AC Current 4A, 80A ±(2.5%+5d) 1mA
DC Voltage 400mV - 600V ±(1.5%+3d) 0.1mV
AC Voltage 400mV - 600V ±(2.0%+4d) 0.1mV
Resistance 400Ω - 40MΩ ±(1.5%+2d) 0.1Ω
Frequency 5Hz - 10MHz ±(1.2%+3d) 0.001Hz
Duty Cycle 5% - 99.9% ±(1.2%+3d) 0.1%
481729
Clamp Meter
with Temperature
Model: 72-7222
• 1999 Count autoranging display
• 10MW Input impedance
• Diode test and continuity buzzer
• Max hold and data hold
• Supplied with zipper case, test leads, owners
manual
Technical Data
Range
200mV, 2V, 20V, 200V,
Accuracy
DC Voltage 600V ± (0.8% + 1d)
AC Voltage 2V, 20V, 200V, 600V ± (1.2% + 5d)
AC Current 2A, 20A, 200A, 400A
200R, 2kR, 20kR, 200kR,
± (1.5% + 5d)
Resistance 2MR, 20MR ± (1.0% + 2d)
Temperature-40°C to 1000°C
£11.50
± (1.0% + 3d)
order code IN0510906
464206
Digital Clamp
Meters
Technical Data
Model 3340 3341
Digital Display Counts 2000 4000
25mm Backlit Display • •
Overload Protection • •
Continuity Buzzer • •
Diode Check • •
Data Hold • •
DCA Zero
MAX Hold •
Auto Power Off • •
Low Battery Indication • •
AC/DC Current
Safety Category
CATIII
600V
CATIII
600V
481611
IN0523806 3340 £15.95
IN0523906 3341 £18.85
Classic Tone and
Probe Kit
Model: 701 KIT
Recognised by technicians around the world as the
industry standard for cable and wire identification. The
kit can be used to identify single conductors or cables
within a bundle, at a cross connect pointer on any
conductive material.
The Kit Includes: 77HP high power tone generator,
200EP Inductive amplifier and sturdy polyester carry
case.
• Amplifier can be used with any tone generator
• Polarity testing
• Continuity testing
• Talk battery supply
• Selectable warble tone
• 3 Colour LED (identifies AC ring voltage)
• Weather resistant design
£53.95
order code IN0515206
494928
Tone and Probe Kit
Identify or trace wires or cables
within a group without having to
damage the insulation. Identify
faults and states of telephony
systems.
• Check continuity of cables and
wires
• Track cables and wires and locate
break points
• Identify the state of working
telephone lines (clear, ring, busy)
• Send a single solid tone or dual
alternating tone down a wire
Technical Data
Transmitter Specifications
Tone Frequency 1.5kHz
Power 9V PP3 Battery
Dimensions (WxHxD) 35x145x25mm
Weight
Receiver Specifications
114g
Frequency Range 100Hz - 300kHz
Power 9V PP3 Battery
Dimensions (WxHxD) 43x238x26mm
Weight
£9.95
106g
order code IN0526606
510017
Digital Multimeter With
Network Cable Tester
A digital multimeter with Network/
Telephone cable test facilities,
backlight, large LCD display and
built in stand.
•3¹⁄₂ Digit, Large LCD display
• AC/DC Voltage measurement
• AC/DC Current
• Resistance measurement
• Capacitance, Diode and
Transistor test
• Network/Telephone cable test
• Live wire Test
• Audible continuity tester
• Removable module for cable
testing
• Data hold
Physical Specifications
Power 9V PP3
Dimensions (WxHxD) 100x195x38mm
Weight 420g
Includes: 9V PP3 battery ,two test leads, multi function
socket adaptor rubber upholster and user guide.
£10.50
order code IN0565206
528754
LAN Tester
A two piece LAN
tester with
10/100/1000MB/s speed
and duplex display.
• Speed measured 10,
100 or 1000MB/s
• Duplex full or half
indicated by LED
• Tests single sided or
inline device
• Verifies whether device appears as a hub (switch) or
PC and whether pulses are data or link
• Tone gererator/probe to trace cable pairs through
complex wiring systems
• Single sided cable pair testing - Verify what pairs are
terminated in the hub, switch or PC
• Two sided cable pair testing - Display what pairs are
wired; whether cable is straight through or crossover;
and whether cable has pair reversals
The unit answers the 12 most common
questions that occur:
• Is my hub/switch or PC ON and transmitting?
• Do I require a straight thru or crossover patch cable?
• Is my LAN speed 10, 100 or 1000MB/s and is it half
or full duplex?
• Is the hub/switch and PC link negotiating a slower
speed and duplex than expected?
• Do my hub or PC appear as a hub or PC?
• Is a hub or PC connected to my cable?
• Does my hub or PC require 2 or 4 pair cables?
• What pairs are terminated in my cable?
• Where is my cable in the wiring closet?
• What hub port is my PC using?
• Is my cabling straight through or crossover?
• Does my cable have inverted pair or other faults?
£149
order code IN0464006
448077
2 in 1 Cable Tester
and DMM
A combined cable
tester and digital
multimeter with
external tone probe.
The tester can verify
continuity, quickly
trace and identify
cables within a group
and also check the
operation of telephone
lines.
• Includes Tone
Generator and
Amplifier Probe
• Wire trace, continuity test and clear/busy/ringing line
test and tip/ring identification
• Continuous or variable tone selection
• Insulated, inductive probe tip prevents shorting
• Built in speaker and headphone socket
• 3Z\x Digit, 2000 count LCD for multimeter functions
• Autoranging multimeter operation
• AC/DC Voltage, AC/DC Current and resistance
multimeter functions
• Max and hold functions
• Continuity buzzer and diode test
£25.95
order code IN0546306
MicroScanner 2
Cable Verifier
Amplifier Probe
and Tone Generator
515720
Next generation MicroScanner streamlines
voice/data/video cable and service testing. Revolutionary
user interface makes testing fast, easy, and crystal clear.
Everything cable technicians need to know, including
available services (10/100/1000 Ethernet, POTS, PoE
voltage), cable length, wiremap, cable ID, and distance
to fault all are displayed on one oversized backlit
screen. Built-in IntelliTone digital and analogue toning
precisely locates virtually any cable or wire pair – even
on active networks. Includes carry case.
• Displays cable length, wiremap, cable ID, and distance
to fault on one screen
• Detects todays media services, including 10/100/1000
Ethernet, POTS, and PoE
• Locates virtually any cable or wire pair with
IntelliTone digital and analogue toning
• Tests all common media types, including RJ11, RJ45,
Coax, with no adaptors
• Rubber over mould enhances grip and increases
ruggedness
• Oversized backlit LCD makes results crystal clear in
any work environment
• Detail mode gives additional test status information
• Intuitive icons shows what's at the far end of any
cable (10/100/1000 switch, POTS service, short, cable
ID)
IN0537706 Microscanner 2
502289
£283.00
IN0537806 Microscanner 2 Kit £473.00
IN0538006 Pouch £13.75
Amplifier and Tone generator set to quickly and
accurately trace and identify wires or cables, even when
in a bundle.
Amplifier Pro b e
• Compatible with all tone generators
• Adjustable volume level (1-9)
• Allows use of headphones via 3.5mm jack plug
• Signal LED
Tone Generator
• 3 Position mode (Off, Cont and Tone)
• Single solid tone or dual alternating tone output
• RJ-11 (6 position, 4 contact) standard modular jack
• 3 LED displays (Cont, Tone and Low battery)
£29.95
order code IN0445606
451053
EVERYTHING YOU NEED EVERYDAY FROM CPC