ficha de informações de segurança de produtos químicos ... - Acrilex

Product name: Oil Colors Classic
1 – Product/Company Identification
Material Safety Data Sheet
MSDS no.
141
Page
1 / 6
Last review date
10/11/2008
Product name: Oil Colors Classic
Product internal code: Ref: 14123 / 14137 / 14120 / 141160
Company: Acrilex Tintas Especiais S/A
Address: Estrada Galvão Bueno, 5.000 Bairro Batistini – S.B.C. – S.P.
CEP (Postal Code): 09842-900
Phone: (0XX11) 4397-9255
Fax: (0XX11) 4397-9009
e-mail: tintas@acrilex.com.br
Emergency phone numbers:
Product Information: (0XX11) 4397-9265
Medical Emergency: (0XX11) 4397-9245
Transport emergency: (0XX11) 4397-9258
2 – Composition and information on the ingredients
Product type: Prepared
Chemical nature (origin): Artistic Paint
Ingredients or chemical impurities that may lead to hazard
Chemical Name CAS No. Concentration range (%)
Linseed Oil 8001-26-1 30 - 40
Organic Pigments Not available 02 - 30
Mineral Filler Not available 50 - 70
Additives Not available 01 - 03
3 – Hazards Identification
Serious hazards: Product classified as harmful and inflammable.
Product’s effects
Adverse effects to human health: Harmful. The steam emitted for this product can irritate eyes,
mucous membranes and skin. In strong concentrations, it can lead to
narcosis. Ingestion can cause intense abdominal pain and gastric
irritation.
Main symptoms: It can cause nauseas and diarrhea.
Physical and chemical hazards: Inflammable liquid.
Specific hazards: Inflammable and harmful product.

Product name: Oil Colors Classic
MSDS.: 141
Page: 2 / 6
Last review date 10/11/2008
4 - First aid measures
Inhalation: Bad effects to heath are not expected
Contact with skin: wash with plenty of water and soap
Contact with eyes: Wash with plenty of water until the irritation felling is gone. If the irritation is
persisting, search for medical assistance.
Ingestion: Search for medical assistance
Notes to the physician: There is no specific antidote.
5 - Fire fighting measures
Proper extinguishing means
Proper extinguishing means: Foam, dry chemical powder, CO2 (carbon dioxide) extinguishers, water
nebulization.
Specific hazards: Avoid contact with flame or heat sources.
Special methods: Cool the receptacles exposed to fire with water fog. Remove them from the fire
area, if there is a possibility of doing this without any risk.
Protection for the firefighters: During the fire fighting, use mask and complete protection against fire.
6 – Accidental release measures
Personal precautions: Wear personal protective equipments (PPE). Provide security for the people.
Avoid contact with eyes and skin. Avoid the inhalation of fog and vapors. Avoid
the direct contact with liquids. Reduce the vapor emission using a water spray.
Removal of ignition sources: Eliminate all the ignition sources, avoid sparks, flames and smoking at risky area.
Isolate the leakage from all the ignition sources.
Dust control: Not applicable, because it is a liquid product.
Prevention Prevenção da of inhalation inalação, Impermeable boots, gloves and clothes, hermetic security glasses for chemical
and contact with skin,
mucous mucosas and e olhos: eyes:
products and appropriate respiratory protection.
Precautions concerning to the
environment: Stop the flow if possible, do not guide the spread material for any public drain
services. Avoid the possibility of contamination of superficial Waters and water
sources. Restrict the leakage to the smallest area as much as possible. The later
treatment of water should be taken into account before removing the product with
water. Avoid using this kind of removal.

Product name: Oil Colors Classic
MSDS.: 141
Page: 3 / 6
Last review date 10/11/2008 continuation…
Cleaning measures:
Recovering: Collect the product in an emergency receptacle properly labeled and well closed.
Keep it recovered for subsequent elimination.
Neutralization: Absorb with soil another absorbing material.
Discard: Do not discard it together with the common waste. Do not discard it in the sewage
system or in water courses. Keep it isolated if possible for later recovering or discard.
The final discard of it should be supervised by a specialist, according to the valid
environmental legislation.
7 – Handling and storage
Handling
Technical measures: Provide local ventilation where it is required by the processes. All the conduction
elements of the system in contact with the product should be connected to an
electrical ground system. Use anti-spark tools.
Prevention of the worker
exposition: Use personal protective equipments (PPE) in order to avoid contact with the
product.
Precautions for a Use the personal protective equipment indicated.
secure handling:
Guidelines for a Handle according with the general rules of industrial security and hygiene.
secure handling:
Storage
Appropriate technical measures: The storage place should have impermeable floor, free from combustible
material. Besides that, it should be equipped with a contention dyke in order to
retain the product in case of leakage.
Storage conditions
Appropriate: Store the product in tanks properly designed and approved or metallic receptacles,
like casks and well closed cans, well aired places and on the room temperature,
under the atmospheric pressure, away from heat, oxidizing agents and ignition
sources.
To be avoided: Humid, uncovered and airless places.
Non-compliant products/
materials: Strong oxidizing products (liquid chlorine and concentrated oxygen).
Secure material for the packages
Recommended: Casks made of carbon steel and/or plastic packages.

Product name: Oil Colors Classic
MSDS.: 141
Page: 4 / 6
Last review date 10/11/2008
8 – Exposition control and personal protection
Appropriate personal protective equipments
Respiratory protection: In low concentrations, use respirator with chemical filter for organic vapors. In
high concentrations, use respiratory equipment or an air sent assembly.
Hands protection: PVC gloves or other gloves resistant to organic solvents.
Eyes protection: In the operations in which there is the possibility of throwing or sprinkle of the
product, it is recommended to use security glasses or facial protector.
Protection for skin and body: In activities that result in direct contact with the liquid, use PVA aprons and boots.
Special precautions: Keep emergency showers and eye washer available in the places in which the
product is handled.
Hygiene measures: Clean up clothes and shoes after use. General control methods commonly used in
industrial hygiene should minimize the exposure to the product. Do not eat, drink
or smoke while handling chemical products. Separate the working clothes from
the common ones.
9 – Physical and Chemical properties
Physical state: Pasty
Color: Several (According to the Catalogue)
Odor: Characteristic
pH: Not applicable
Specific temperatures:
Distillation range: Not available
Flash point: 122 ° C (closed cup)
Explosivity limits:
Upper: (LES) 9,0 %
Lower: (LEI) 0,9 %
Density: Between 1,037 e 1,750 (Variable according to the color)
Solubility: Insoluble in water.
10 – Stability and reactivity
Specific conditions
Instability: Stable in normal handling and in normal storage conditions.
Hazardous reactions: None, when the product is stored, used and processed correctly.
Conditions to be avoided: Exposition to ignition sources and high temperatures for long periods.
Hazardous products resulting
from decomposition: An incomplete combustion will result in the emission of irritable, corrosive and
toxic gases.

Product name: Oil Colors Classic
MSDS.: 141
Page: 5 / 6
Last review date 10/11/2008
11 – Toxicological information
Information according to the different exposition means
Utmost toxicity: Harmful product.
Local effects: It can provoke headache, nausea, vertigo, mental confusion, irritation in the upper
airways. Moderately irritating for skin. Irritating for eyes.
12 – Ecological information
Environmental effects, behavior and impacts caused by the product
Mobility Moderately volatile.
Environmental impact: It can contaminate ground waters.
Ecotoxicity: Like the most of the hydrocarbons, its presence in water can result in the
transmission of unwanted quality to the water, making it impossible to be
consumed.
13 – Disposal considerations
Disposal methods
Product: The treatment and the discard of the product should be technically evaluated in
each case.
Product waste: Discard in an authorized installation.
Used package: Discard in an authorized installation. Do not reuse the package.
14 – Transport information
National and international regulations Resolution No. 420/2004, ANTT (Agência Nacional de Transportes
Terrestres - National Agency of Terrestrial Transport).
Edict No. 96.044/88 (Regulamento de Transporte Rodoviário de
Produtos Perigosos – Regulation of Dangerous Goods Highway
Transport) – Edict No. 98.973/90 (Regulamento de Transporte
Ferroviário de Produtos Perigosos – Regulation of Dangerous
Goods Railway Transport) - IATA handbook (International Air
Transportation Association) - IMDG Code handbook (International
Maritime Dangerous Goods Code) from IMO (International
Maritime Organization).
Product classified as dangerous and inflammable
ONU Number: 1263
Risk class 3
Risk number 30
Package group: III

Product name: Oil Colors Classic
MSDS.: 141
Page: 6 / 6
Last review date 10/11/2008
15 – Regulatory information
Standards: ABNT / NBR 14725
Directive 67/548/EEC
Classification and symbols: Inflammable (F)
Harmful (Xn)
Information on risks and security, according to the product label:
16 – Other information
R10 - Inflammable product.
R20 / R21 Harmful if inhaled or in contact with skin.
S7 - Cover after use.
S2 / S13- Keep out of reach of children and animals.
S46 - In case of ingestion, do not provoke vomiting and seek medical assistance
immediately, taking the product label or package.
S51 - Used only in well aired places.
This product is considered harmful and inflammable.