Allied International brochure

COMPANY DETAILS
Company Name
ALLIED INTERNATIONAL S.R.L.
FITTINGS AND FLANGES
Registered Office
Località Vascellino
29010 Nibbiano Val Tidone (Piacenza), Italy
Paid Capital
Euro 650,000.00 I.V.
VAT No.
IT 01294450331
Chamber of Commerce
REA/PC 150342
Sales Offices & Administration
Località Vascellino
29010 Nibbiano Val Tidone (Piacenza), Italy
Telephone
+ 39 0523 991211
Fax
+ 39 0523 991277
E-mail
alliedfittings@alliedfittings.com
Website
www.alliedfittings.com
Warehouse
Via Emilia Pavese, 34/A
29015 Castel San Giovanni (Piacenza), Italy
Telephone
+ 39 0523 734111
Fax
+ 39 0523 734150

Valter Alberici and Marc Herzstein, founders of Allied International
S.R.L. Fittings and Flanges. Above: the Office Headquarters in Nibbiano
Val Tidone, opened on September 5th 2004 and dedicated with
cherished and fond memories to their mothers, Mrs. Luisa Maini Alberici
and Mrs. Isabel Smith Herzstein.

Valter Alberici, President - CEO Gianluigi Varesi, General Manager
Founded in 2000 by two well known business managers in the buttwelding fittings sector, Valter Alberici and Marc
Herzstein, with head offices in Nibbiano Val Tidone and warehousing in Castel San Giovanni (Piacenza, Italy), since
its inception Allied International has rapidly become a one-stop solution and worldwide leader in distribution and
stock management for all kinds of fittings, flanges, piping, studbolts, gaskets, lined and clad pipes, large radius
bends and special supplies for petrochemical, oil, gas and power industries for the production and transformation
of energy.
Close co-operation with all Clients, 24,000 tonnes of 50,000 items available for prompt delivery, a staff of 100 skilled
and motivated professionals, 100,000 sqm of warehouse and constant attention to the latest market trends and
standard requirements are at the basis of the rapid growth and success of Allied International all over the world, increasingly
oriented at guaranteeing the highest level of quality.
Allied International is part of Allied Group, with 46 subsidiaries and sales offices located in USA, Canada, France,
UK, The Netherlands, Russia, Kazakhstan, Australia, China, India, Nigeria, UAE, Singapore, Japan, South Africa and
others coming in the near future.
These concrete results make Allied International a suitable and reliable business partner.

Commercial arm of Allied International Group, Allied International provides services and support to all the Group’s manufacturing
companies for sales, marketing, purchasing, expediting, customer services, QA, certification, accounting and co-ordination of
packing and distribution all over the world.
Thanks to this company, Allied International Group is the only group in the buttwelding fittings sector to guarantee
the complete cycle of production and distribution. The only group to adopt the concept of globalization as the founding
philosophy of its business mindset.
Warehouse & Stock
Allied International offers from 24,000 tonnes of prompt stock over a range of carbon steel, alloy steel, stainless steel and non
ferrous alloys including equal and reducing tees, crosses, concentric and eccentric reducers, caps, 90° and 45° long radius
elbows, 180° long radius return bends, 90° short radius elbows, 180° short radius return bends, lined and clad pipes in all
schedules according to ANSI B36.10 and ANSI B36.19 and up to schedule XXS and over, in sizes up to 120” NPS.
Manufacturing Standards include ASME B16.9 - B16.25; MSS-SP75-43; DIN 2605 - 2606 - 2615 - 2616 - 2617; BS 1640;
GOST 17374 - 17375 - 17376 - 17377 - 17378 - 17379 - 17380.
ISO 9001 approved sources for flanges/valves in accordance with ASME B16.5 - B16.47 Series A & B; API 590 (lineblinds) - API 6D
ASME B16.34 - BS4504 - 3293 (long weld necks).
Special Products include reducing elbows, barred tees, equal & reducing laterals, extruded header & manifolds, reinforcement
saddles, split tees, launching & receiving traps, Y pieces, bends.
Market & Customers
Allied International supplies the world-leading engineering companies and the major projects in the field of production and
transformation of energy for the sectors of:
Offshore & Subsea · Oil & Gas pipelines · Petrochemical · Thermal Power · Stock items for all sectors
It fully meets every demand with a widespread commercial network, product quality, dynamic staff. To get the best results all
over the world.
The new Allied International’s warehouse in Castel San Giovanni (Piacenza), Italy:
the main entrance
The new Allied International’s warehouse in Castel San Giovanni (Piacenza), Italy:
the office building

The Allied International’s headquarters in Nibbiano Val Tidone (Piacenza), Italy
View of the Allied International UK plant in Grangemouth, Scotland
Interior of the new warehouse of Allied International UK in Aberdeen, Scotland
The new warehouse in Aktau, Kazakhstan
Paris, France
Marseille, France
Dordrecht, The Netherlands
COMMERCIAL OFFICES
Perth, Australia
Moscow, Russia
Singapore
Tokyo, Japan
Johannesburg, South Africa
NIBBIANO VAL TIDONE, Piacenza, Italy
Head Office Area (sqm)
Open: 10,000
Covered: 3,000
Total Area: 13,000
CASTEL SAN GIOVANNI, Piacenza, Italy
Warehouse Area (sqm)
Open: 75,000
Covered: 25,000
Total Area: 100,000
GRANGEMOUTH, Falkirk, Scotland
ALLIED INTERNATIONAL UK Ltd.
Production and Warehouse Area (sqm)
Open: 4,400
Covered: 2,300
Total Area: 6,700
ABERDEEN, Scotland
ALLIED INTERNATIONAL UK Ltd.
Warehouse Area (sqm)
Open: 750
Covered: 1,700
Total Area: 2,450
AKTAU, Kazakhstan
CASPIAN ALLIED INTERNATIONAL Too
Office and Warehouse Area (sqm)
Open: 40,750
Covered: 2,500
Total Area: 43,250
SUMMARY OF ALLIED INTERNATIONAL
Offices and Warehouses Area (sqm)
Open: 130,900
Covered: 34,500
Total Area: 165,400

A new warehouse is part of the new plant in Castel San
Giovanni (351,100 sqm total area). Aimed to support the
manufacturing and distribution volume growth of the
Allied International Group companies, the new facilities
have been realized with the latest technologies (machinery
and production/distribution processes) at worldwide
level in the fittings industry. In respect of environmental
protection and human rights.

Materials used and related International Standards
CARBON AND ALLOY STEEL FOR MODERATE AND ELEVATED TEMPERATURES
- ASTM / ASME A234: WPB - WPC - WP1 - WP11 - WP12 - WP5 - WP22 - WP9 - WP91
- EN 10216-2: P195GH - P235GH - P265GH - 20MnNb6 - 16Mo3 - 8MoB5-4 - 14MoV63
10CrMo5-5 - 13CrMo4-5 - 10CrMo9-10 - 15NiCuMoNb5-6-4 - X11CrMo5 - X11CrMo9-1
X10CrMoVNb9-1 - X10CrWMoVNb9-2 - X20CrMoV11-1 (former BS-DIN-AFNOR equivalent grades)
- EN 10253-1 - EN 10253-2
HIGH YIELD STEEL FOR PIPELINE AND OFFSHORE
- ASTM A860 / MSS-SP75: WPHY 42 - WPHY 46 - WPHY 52 - WPHY 60 - WPHY 65
WPHY 70 grades - WPHY 80 only as per MSS-SP75
- EN 10208-2: L245NB - L290NB - L360NB - L415NB - L360QB - L415QB - L450QB - L485QB
L555QB (former DIN 17172 equivalent grades)
CARBON AND ALLOY STEEL FOR LOW TEMPERATURE SERVICE
- ASTM / ASME A/SA 420: WPL6 - WPL3
STAINLESS STEEL
- ASTM / ASME A/SA 403: WP304 - WP304L - WP304H - WP304LN - WP304N - WP316 - WP316L
WP316H - WP316LN - WP316N - WP317 - WP317L - WP321 - WP321H - WP347 - WP347H
WPS31254
- ASTM A774: TP304L - TP316L - TP317L - TP321 - TP347
- Equivalent grades of EN 10253-3 - EN 10253-4 (former AFNOR-DIN-BS equivalent grades)
FERRITIC/AUSTENITIC STAINLESS STEEL
- ASTM / ASME A/SA 815: UNS 31803 (duplex) - UNS 32750 (superduplex) - UNS 32760 (superduplex)
UNS 32550 (superduplex) and equivalent
NICKEL ALLOY
- ASTM / ASME B/SB 366: UNS N04400 - UNS N06600 - UNS N06625 - UNS N08020 - UNS N08800
UNS N08811 - UNS N08825 - UNS N10276
COPPER ALLOY
- Copper-nickel ASTM / ASME B466: UNS C70600 (CuNi 90/10) - UNS C71500 (CuNi 70/30)
TITANIUM ALLOY
- ASTM / ASME B/SB363: WPT2 - WPT12
Manufacturing Standards
- ASME B16.9 - ASME B16.25 - MSS-SP75 - MSS-SP43
- DIN 2605 - 2606 - 2615 - 2616 - 2617 - BS 1640 - GOST 17374 - 17375 - 17376 - 17377
17378 - 17379 - 17380
Design Codes
- ASME B31.1 - ASME B31.3 - ASME B31.4 - ASME B31.8
- EN 13445 - 13480 - 12952 (former BS PD 5500 - Swedish Ordinance AFS 1994:39)
- DIN 2413 - TRD301
- AD 2000 Merkblatt B2-B3-B9
- STOOMWEzEN rules for Pressure Vessels

360° ENTREPRENEURIAL CULTURE
Allied International Group was founded in 2000 with a great project: to become a
global organization able to impose its own leadership on the world markets, without
however losing contact with its roots, which were nourished by professional and
human historical values and by principles of substance, loyalty and community
cohesion.
This aim has been achieved thanks to structural factors: the widening of the sales
network as a firm philosophy of internationalization; the progressive growth in
production sustained by technological innovation; the certificated quality of its
products and, last but not least, the valuing of its human resources.
It is thanks to this intelligent fusion of excellence, this internal spirit and this propelling
strength that the Group can sustain an exceptional pace of development, assert its
identity, establish a cooperative and trusting relationship with its Clients.
These are the guidelines that underlie its entrepreneurial culture:
• Focus on the Client, establishing continuous interaction, founded on knowledge
and trust, and give them our full attention, so that any request may be satisfied
with a perfectly targeted product.
• Pursue quality and innovation through intense Research and Development, collaboration with top universities, in-depth market
studies, continuous improvements in quality standards, confirmed by the highest-level international certifications.
• Value our employees within a working environment in which each person receives consideration and exercises their right to be
listened to in teamwork. Preserve direct relationships that are less formal, but still maintain respect for individuals’ roles, relationships
nourished by regular meetings to decide on future strategies and renew the sharing of values.
• Feel part of the area in which the company has its roots, respecting the natural environment and human rights, supporting
social projects to benefit the weaker segments of the population, sponsoring sporting, cultural and traditional folk events. Aim for
a generally positive effect on the local area.
• Foster coherent and transparent communication both within the company, by means of its Intranet website, and outside it,
by means of the company’s Internet websites, attendance at trade fairs, editorial and advertising material in the most renowned
publications of the sector, the Manual of Visual Identity which also guarantees formal consistency of visibility and agents’ and
managers’ relational style.
It was this very 360° entrepreneurial culture that Ernst & Young wished to recognize in 2009 with the prestigious Award for
Entrepreneurial Excellence presented to Valter Alberici, President of
Allied International Group, nominated Entrepreneur of the Year in the
Finance Section “for having created a Group able to assert itself on an
international level in highly technological sectors, to the extent that
it is the only manufacturer in Europe, and among the few worldwide,
of some of the most delicate components which operate within
nuclear reactors”.

The Allied Group
COMMERCIAL DIVISION
Allied International S.R.L.
• Head Office in Nibbiano Val Tidone, Piacenza, Italy
• Warehouse in Castel San Giovanni, Piacenza, Italy
• Commercial Office in Moscow, Russia
• Commercial Office in Tokyo, Japan
Allied International France S.A.R.L.
• Commercial Office in Paris, France
• Commercial Office in Marseille, France
Allied International UK Ltd.
• Office, Plant and Warehouse in Grangemouth, Falkirk, Scotland
• Warehouse in Aberdeen, Scotland
Allied The Netherlands BV
• Commercial Office in Dordrecht, The Netherlands
Caspian Allied International Too
• Office and Warehouse in Aktau, Kazakhstan
Allied Fittings Asia Pacific Pte. Ltd.
• Commercial Office in Singapore
Allied International Holdings Pty. Ltd.
• Commercial Office in Perth, Australia
Allied Southern Africa
• Commercial Office in Johannesburg, South Africa
Representative Offices
• Abuja, Nigeria
• Mumbai, India
MANUFACTURING DIVISION
Tectubi Raccordi S.p.A.
• Head Office, Plant and Warehouse in Podenzano, Piacenza, Italy
• Plants in Castel San Giovanni and Calendasco, Piacenza, Italy
• Commercial Office in Abu Dhabi, United Arab Emirates
Tectubi Tianjin Fittings Co. Ltd.
• Head Office, Plant and Warehouse in Tianjin, China
• Commercial Office in Beijing, China
OMP Mongiardino S.p.A.
Tectubi Raccordi Bending Division
• Office and Plant in Carbonara Scrivia, Alessandria, Italy
Gieminox Tectubi Raccordi S.R.L.
Tectubi Raccordi Welded Pipes Division
• Head Office, Plant and Warehouse in Schio, Vicenza, Italy
Raccordi Forgiati S.R.L.
• Office and Plant in Nibbiano Val Tidone, Piacenza, Italy
AMERICAN AREA
Allied Fitting L.P.
• Head Office and Warehouse in Houston, USA
• Warehouses in Atlanta, Denver, Los Angeles, New Jersey, Charlotte, USA;
Edmonton and Toronto, Canada
Tri-Lad Flanges and Fittings Inc.
• Corporate Head Office in Houston, USA
• Warehouses in Toronto and Edmonton, Canada
Warren Alloy Valve and Fitting Co. L.P.
• Corporate Head Office in Houston, USA
• Warehouses in Charlotte, Cincinnati, Lakeland, New Jersey,
Salt Lake City, Mobile, USA; Toronto and Edmonton, Canada
Allied Chrome
• Corporate Head Office in Houston, USA
• Office and Warehouse in Chicago, USA

Tectubi Raccordi S.p.A.
Incorporated into Allied International Group in 2003, Tectubi Raccordi
was the first Italian manufacturer of steel buttweld pipe fittings and today
remains the world-leading manufacturer for all types of buttweld fittings to be
used in each sector of the power production and transmission market:
Nuclear Power · Offshore and Subsea · Oil & Gas pipelines
Petrochemical · Thermal Power · Stock items for all sectors
Supplier to the most important engineering companies in the world, Tectubi
Raccordi offers the market first-class reliable products and services both during
and after sales. It can also comply with the Client’s specific requirements
and with all relevant specifications. Thanks to the skilled manual ability and
experience of its workers, together with continual technological innovations
and investments, this company has obtained the major quality accreditations,
such as ASME Section III NCA 3800, ISO 9001:2008, ISO 14001:2004,
OHSAS 18001:2007, TÜV AD 2000 MERKBLATT, GOST - ROSTECHNADzOR
Russia and NNSA China.
A wide range of buttweld fittings is produced in the plants in Italy:
- Podenzano (Piacenza): seamless and welded elbows, tees, reducers, caps
and special products up to 120”.
- Castel San Giovanni (Piacenza): seamless mandrel elbows up to 56” and
fittings up to 120”.
- Calendasco (Piacenza): seamless and welded elbows produced by cold
forming system up to 16” in stainless steel and special alloys.
- Carbonara Scrivia (Alessandria): seamless and welded large-radius bends
produced by hot induction (from 2” to 56”) and cold bending (from 2” to 60”).
- Schio (Vicenza): heavy wall welded pipes, longitudinally welded clad pipes,
bi-metal lined pipes; outside diameter from 3" to 100"; wall thickness from 3
mm up to 60 mm; lenght up to 12 meters.
In addition, two new plants in Castel San Giovanni, Italy and in Tianjin, China
endowed with the latest technologies, will increase significantly the production
capacity.
Tectubi Raccordi, which exports 90% of its production worldwide and in this
way constantly compares itself with broad horizons, is not new to this principle
of always looking to the future through research and innovation, while it is a
historical company, which has its roots in the far-off 1950s.

Tectubi Tianjin Fittings Co. Ltd.
In 1985, Allied USA had started its business in China supporting the then already
established local market. Now Allied International Group has strengthened
its activities through Tectubi Raccordi, well known in China as a world leading
high pressure fittings manufacturer and has successfully developed its market
in not only the petrochemical and gas pipeline areas, but also aggressively in
the booming power industry.
Tectubi Raccordi has constituted a newco Tectubi Tianjin Fittings in China,
with an investment plan focused to suitably support new Chinese projects in
the nuclear industry.
The new plant, which foresees the recruitment of 200 employees, started in
2011 and has already reached its target of 15,000 tonnes per year.
The main products are hot finished, mandrel, seamless and buttwelding fittings.
The new plant, with a total surface of 68,000 sqm (covered 35,000
sqm), is located in the centre of Dongli Economic and Technological Development
Area (DEDA) and will allow Tectubi Tianjin Fittings to be included in the
Localization Program supported by the Chinese Government. In addition a
sales office has been opened in Beijing, to better serve the Chinese market.
The factory is equipped with the most advanced equipment while all the
“key” technical personnel have been trained in Italy.
Proximity with Chinese Clients and the combination of Italian expertise and
Chinese production speed are the ingredients of a sure success. The longterm
goal is to play a dominating role as the main supplier in critical services
such as super critical thermal power plant operations, nuclear power plants,
LNG terminals, gas pipelines, petrochemical and chemical industries, by
establishing a warehouse to fulfil the objectives of a round-the-clock service
commitment to Clients in China and through sharing the resources of the
international Group production and warehouse resources.
Its market ideas: taking the Clients as our core, taking product quality as our
vital point, taking honesty as our essence.

Raccordi Forgiati S.R.L.
Since its foundation in 1976, Raccordi Forgiati has been actively trading
in and developing its position in the buttwelding fittings market and was
incorporated into the Group early in 2005.
With its long history and experience, Raccordi Forgiati is extremely well
known in its own right as a prestigious manufacturer, specialising in the
full range of buttweld equal and reducing tees, concentric and eccentric
reducers, and caps, in the size range from 1/2” NPS through 36” NPS, fully
complementing and enhancing the Group’s manufacturing ranges. Its
considerable growth has not prevented Raccordi Forgiati from retaining an
organisational structure that is indispensable in ensuring its renowned quality,
delivery and service, supported by a considerable stock of basic materials,
semi-finished and finished products.
As with the other Group manufacturing plants, Raccordi Forgiati independently
holds the highest levels of quality approvals such as TÜV AD 2000 MERKBLATT
and holds ISO 9001:2008 under Lloyd’s accreditation. Since 1986 it has its
own Design, Laboratory, Testing and Inspection facilities, independent of the
other Group facilities, and an independent reference list detailing involvement
in projects on a global basis, confirming it as a world class manufacturer in its
range.
The main Clients therefore include the major global players in the oil, gas, and
petrochemical industrial sectors, who have repeatedly shown their confidence in
the choice of the diverse range of material grades from which Raccordi Forgiati
manufactures its products. These have included from the carbon steel grades,
suiting moderate, low temperature, high yield characteristics, through the alloy
steel grades for elevated temperatures, to austenitic and ferritic/austenitic
stainless steels, including duplex and superduplex, and beyond into the latest
industry grades, including nickel base non ferrous alloys.
Located in Nibbiano and just 3 km from the Group headquarters in Vascellino,
Raccordi Forgiati expands Allied International Group facilities with 6,000
sqm of covered production area and an additional 35,000 sqm (7,000 covered,
28,000 open) of yard and storage facilities.

Allied International France SARL
Operating in Paris and Marseille, where was established in 2004, is a wholly
owned subsidiary of Allied International. With its staff of over 50 years’
combined experience in the piping and fittings business, Allied International
France focuses on the development of commercial activities involving all of
the Group’s resources.
Naturally responsible for marketing and sales in the French domestic market,
Allied International France combines logistical support to Group development
both directly and particularly through co-ordination with Allied International
France and its fittings production entities.
Allied International France has additional responsibility for developing sales
with the main international Engineers and Contractors based in the major
global locations or, for example, Paris, London, Tokyo and Yokohama, and
for co-ordinating international projects between Italy’s main offices and other
Allied International France networks as well as developing sales on “package”
business.
It is also ideally situated and positioned for the development of business in the
Maghreb area.
As well as this sales and marketing responsibility, the globally experienced
personnel in Allied International France co-ordinate the overseas outsourcing
of the Group to service stockholding and package business, and are continuously
involved in the active, direct audit of manufacturers and suppliers in the global
supply chain.
Allied International France is a key hub in the Group’s developing business.

Allied International UK Ltd.
Strategically positioned, and with extensive knowledge of the UK oil and gas
sectors, Allied International UK has strengthened its position particularly in
the UK gas sector where it has achieved formal qualification in respect of
national grid specification T/SP/B/12 for the manufacture and supply of 103
bar rated products, utilising the Group company facilities of Tectubi Raccordi
and Raccordi Forgiati. The company is also approved by NG for supply of
flanges to T/SP/F/1. In its own right, Allied International UK is the holder of
prestigious BSI Kitemark licences for products utilised in the UK gas sector
steel pipeline system. These licences are in respect of independent gas distribution
networks specifications GIS/F7:2006 and GIS/L2:2006 for buttweld fittings,
flanges, and coated pipes as governed by these gas industry standards.
Located in Central Scotland where it is close to the major operational
complexes of chemical and refining plants it occupies 6,700 sqm capacity
including production facilities of 800 sqm and 2,300 sqm of fully racked
warehouse storage. External yard facilities extend to 4,400 sqm.
Stock volume is some 3,000 tonnes and enables the company to continue
to supply packages of pipe, buttweld fittings, ANSI/BS/EN flanges, class
3,000# screwed & socket weld fittings, branch outlets, gaskets, studbolts,
MI & steel low pressure fittings, threaded pipes & nipples and ancillary products
for the wider oil, gas, petrochemical, process, energy, and water sectors.
Stocks are held in size range 1/2” to 48” sch std through sch xxs and pressure
ratings 150 lb to 2,500 lb in carbon, low temperature and high yield steels.
2011 saw the opening of the new Aberdeen branch and warehouse, stocking
an additional 1000 tonnes of material, specific to the offshore industry. Stocks
are held up to 24” diameter in high pressure linepipe, buttweld fittings and
flanges, supported by the main Group stocks in Grangemouth.
Allied International UK manufactures many products outside Group production,
including lineblind, spade, and spectacle blind flanges, and continues to
manufacture non-standard bend angles in a wide range of diameters and now
includes nipple manufacture in various materials and lengths with its machining,
drilling and tapping facilities as available from in-house manufacturing
and production facilities up to 48” (1,220 mm) NPS for tubular products.
The company offers extensive support to its Clients and is in its own right
accredited by BSI to ISO 9001:2008. It is registered by Achilles Information on
the Utilities Vendor Data Base (UVDB) to enable participation in utility sector
projects, is similarly registered in the Achilles Verify Register in respect of SHEQ
(safety, health, environmental, and quality) requirements, and is further registered
under FPAL to enable participation particularly in the UK offshore sector.

Allied The Netherlands BV
Allied The Netherlands is a sales office located in Dordrecht, aiming to meet all the
expectations of the Dutch, Belgian and German market.
This area hosts numerous highly qualified trading engineering companies meeting
the needs of projects located all over the world, with the supply of products aimed
at the energy production and transformation market.
For this reason the presence and activity of Allied The Netherlands is highly strategic,
because it interacts closely with these companies and covers the market
needs, offering the whole range of Allied International Group high quality fittings
and piping. With the aim to make this dialogue and the business relationship even more solid and satisfactory.
Caspian Allied International Too, Kazakhstan
Caspian Allied International is a new Kazakh trading company located in Aktau,
Kazakhstan, on the Caspian Sea. The company is established on an area of 43,000
sqm, starting out with 2,000 sqm of covered area - to be increased in the future and
400 sqm of offices.
It serves the oil, gas and petrochemical industries as well as the energy and nuclear
markets, supporting with a prompt delivery service all the projects implemented in
the Caspian area and Central Asian region with all kinds of fittings and piping materials.
Caspian Allied International is able to satisfy the daily maintenance requirements
of its Clients as well as any kind of new and/or customized project according
to customers’ needs, thanks to a stock of finished and unfinished goods. It takes care in fact of the full range of services: expediting,
additional tests and inspection, packing, marking and transportation.
Allied Fittings Asia Pacific Pte. Ltd., Singapore
Linking the Singapore and Tokyo offices, this new regional headquarters and sales office,
located in Singapore, gives the Group the chance to be present in an area where the sector’s
main international Clients are based. From Singapore it is much easier to gather and
increase the opportunities that will be opening up in Malaysia, Korea, Indonesia, Brunei,
Taiwan, Thailand, Vietnam, Burma, Laos and the Philippines, areas to supply with a complete
range of fittings and piping guaranteeing prompt delivery, as well as technical and logistic
support to local orders. Here too there will be the whole cycle of production, storage
and sales, with all the advantage of the manufacturers Raccordi Forgiati and Tectubi Raccordi’s amassed experience.
Allied International Holdings Pty. Ltd., Australia
Allied International Group is broadening its commercial network with the Perth sales
office, in order to establish direct co-operation with Clients operating in the Pacific area,
in the petrochemical and energy sectors. Its efficacy and uniqueness are based on the
synergy of the commercial links with the producer, Tectubi Raccordi, Tectubi Raccordi
Bending Division and Welded Pipes Division. This synergy guarantees to the Client not
only prompt delivery, but also technical support, quality control and service, all in one go.
This will speed up the relationship, supplying concrete answers and constant and direct
assistance. In terms of product quality, technology and experience, this is the most efficient response to the expectations
of an area in such a state of ferment, rich in projects connected to the discovery of reserves, where the oil and natural gas
market is expected to expand greatly.

Allied Southern Africa
Allied International has opened an office in Johannesburg, providing logistics expertise
and sales. Allied International thus demonstrates that a local presence and vicinity to the
requirements of the market are an integral part in its ongoing prioritisation of Client expectations
and business development. This new venture, named Allied Southern Africa,
will give Allied International Group an even stronger position in the sub-Saharan market,
increasing efficiency around the distribution of its products, the quality of the services on
offer and the irreplaceable advantage provided by immediate and direct communication
with its Clients. Its main aim is for a widespread and keen presence in an area that is so strategically important for already
ongoing and potential future development projects in the energy field.
Allied International Tokyo, Japan
In order to consolidate its presence in the Far East, witnessing a rise of business opportunities
in the area, Allied International has opened a new commercial office in Tokyo, where
the main offices of the most accredited engineering companies are multiplying. The office
will allow Allied International to greatly expand its market share in the Asian Pacific area,
guaranteeing not only product quality, but also the commitment of a constant presence,
creating a Client relationship built on trust, consideration, willingness and dialogue on a
daily basis. With the positive effect of strengthening Allied International’s position in the
petrochemical and gas markets, and the growth of the company in the sector of energy and its various applications.
Allied International Moscow, Russia
With huge natural reserves and a growing economy, Russia is obviously a strategic
area of development for Allied International.
Allied International Moscow is a representative office of Allied International.
Located in Moscow, the main goal of this office is to provide local support for
existing Clients and to develop the business particularly for the oil & gas, refinery,
power and nuclear markets. In a business environment with specific norms
and requirements in terms of certification and documentation, its local presence
allows Allied International Moscow to be a reliable supplier for both local and
international projects in this area. Its skilled and experienced personnel with
strong Client focus is a key point that makes Allied International Moscow a global partner for fittings in Russia.
Tectubi Raccordi Abu Dhabi, UAE
Tectubi Raccordi Abu Dhabi is a representative office of the Italian mother company,
a well-established leading manufacturer, to provide direct support for Middle
Eastern Clients and projects. The office has a prestigious location managed by a
resident manager, and was created in the knowledge that it can provide the energy
market with products that are unique in terms of overall quality and excellence, in
order to establish an even greater closeness with local Clients. Tectubi Raccordi
Abu Dhabi has 3 main goals: official representation of Tectubi Raccordi’s high
quality Italian production and of the whole range of Allied International Group’s
stock items; enhancement of the business relationship and improved direct provision
of any necessary support to Clients; acquisition of new Clients by means of targeted communication through sector publications,
direct presentation of products and services to local companies and targeted meetings.

• ASME Quality System Certificate as a Material Organization
ASME SECTION III NCA 3800 Certificate No. QSC - 603
• NNSA - Confirmation Certificate of Foreign Organization’s
Registration for Civil Nuclear Safety Equipment Activities
in the People’s Republic of China
• ISO 9001:2008 by Lloyd’s Register
• ISO 14001:2004 by SWISO
International Certification Service
• OHSAS 18001:2007 by QS Schaffhausen AG
• TÜV - AD 2000 - MERKBLATT W0 and HP0
• GOST ROSTECHNADzOR, Russia
In addition to these Certifications, issued by public entities and organizations, Allied International Group has Approvals issued
by private and public companies, such as: Areva/EDF for the manufacturing of mechanical components for nuclear power
plants in accordance with RCC-M rules, AGIP, ASPC-Alyesca Pipeline Serias Company, Aramco, EIL-Engineer India
Limited, ENEL, Inspecta, KOC-Kuwait Oil Company, National Grid, Norsok, ONGC-Oil and Natural Gas Corporation, QS
Azia Sertik, Škoda, Stavanger, Total, TransCanada, Transco, Vniigaz.
This page shows the Certificates of Approval of the Allied International Group companies
Allied International, Tectubi Raccordi and Raccordi Forgiati.
The certificates can be seen in detail and downloaded on our website www.allied-group.com

Head Office
Allied International S.R.L.
Località Vascellino - 29010 Nibbiano Val Tidone (Piacenza), Italy
Tel. +39 0523 991211 - Fax +39 0523 991277
alliedfittings@alliedfittings.com - www.alliedfittings.com
Warehouse
Via Emilia Pavese 34/A - 29015 Castel San Giovanni (Piacenza), Italy
Tel. +39 0523 734111 - Fax +39 0523 734150
Allied International S.R.L. is part of Allied International Group
01/2013 www.publisi.it - Allied International Group-Communication Unit - Ph. Allied International archive
To visit our website,
scan the QR code
with your smartphone