Mobil LubeGuard Pro Disposable Hybrid Breathers - Bob Johnson ...

Mobil LubeGuard Contamination 

Control Solutions 

It pays to be proactive.

Mobil LubeGuard contamination 

control products help maximize 

reliability. 

Setting the standard for lubrication excellence, ExxonMobil 

is pleased to offer the Mobil LubeGuard line of lubricant 

reservoir breather filters and fluid handling equipment. Mobil 

LubeGuard contamination control products can prohibit the 

ingression of harmful contaminants through the breather 

vents as well as provide protection during the fluid transfer 

process, providing lubricants with the protection they need. 

Ingression of moisture and particulates can occur during 

system operation and fluid maintenance. Protect your 

investment in high performance lubricants by using the 

Mobil LubeGuard contamination control products. 

Take the proactive step by specifying Mobil 

LubeGuard contamination control products. 

Mobil LubeGuard contamination control products can provide 

the following benefits: 

■ Protect expensive equipment, lubricants, and in-line 

process filters. 

■ Maximize lubricant performance. 

■ Lower operating costs. 

It takes more than quality 

lubricants for optimal 

performance.

Mobil LubeGuard Disposable Breather Overview 

MOB-BB 

MOB-1 

MOB-2 

MOB-3 

MOB-4 

MOB-OC2 

MOB/DS-6 

MOB-P4R 

MOB-P8 

MOB-P-1X 

MOB-P4 

MOB-SB-25 

MOB-SB-35 

Features 

Foam Pad 

Patented Polyester Filter 

Silica Gel/ Desiccant 

Air Intake Plug Ring 

Different Sizes 

Foam Pad 

Microglass Media 


Optional Flapper Valve Adaptor Optimizes breather longevity 

Metal Housing 

Color Indicators 

Foam Pad 

Patented Polyester Filter 


Expansion Chamber 

Dual Check Valve 

Pleated Filter Element 

Hydrophobic Media 

Oil Coalescing Media 

(MOB-SB-35 only) 

Vacuum Indicator 

(optional) 

Benefits 

Disperses air evenly over filter 

media and silica gel 

Captures particles as small as 0.5 

micron (73.5% efficiency), 

3-micron absolute/β3 >200 

Removes moisture from incoming 

air, extending fluid and system life 

Allows for easy activation of the unit 

without tools and controlled breathing 

Allows for adaptation to virtually 

any system 

Disperses air evenly over filter 

media and silica gel 




Removes water from incoming air, 

extending fluid and system life 

Rugged casing 

For easy system monitoring 

Stops oil mist during exhalation. 

Disperses air evenly over filter media 

and silica gel 




Removes moisture from incoming air, 

extending fluid and system life 

Creates a nearly sealed system 

Provides a slight system pressurization, 

protects system integrity 

Large surface area, blocks particles as 

small as -micron (99.5% efficiency),/β1>200 

Repels free water, yet permits humid air 

to escape 

Drains oil back to system, prevents 

contamination of work environment 

Actuates when maximum restriction is 

reached, protects system integrity 

Environment 

Intermittent operations 

Gearboxes 

Hydraulic reservoirs 

Transformers 

Storage tanks 

Totes 

Harsh environments 

High temperature 

Mobile equipment 

Nautical applications 

Thermal expansion / 

contraction only 

High humidity 

Gearboxes and other low 

flow applications 

Pumps 

Bearing houses 

Storage drums, Totes 

Washdown applications 

Closed loop systems 

Low humidity applications 

Continuous operations with 

frequent washdowns 

Applications that create oil 

'misting' 

Arid, high dust 

environments

STANDARD DISPOSABLE BREATHERS 

Model # MOB-2 MOB-3 MOB-4 

Unit Size (height, in.) 4.5 6.5 8.5 

Unit Diameter (in.) 4 4 4 

Filtration Area (square in.) 11.2 11.2 11.2 

Amount of Silica Gel (lbs.) 1 1.5 2 

Adsorption Capacity (cups) .7 1 1.5 

Max. Flow Rate (cfm @1 PSID) 16 16 16 

Filtration (µ absolute) 3 3 3 

Op. Temp. Range (˚F) -58 to 212 -58 to 212 -58 to 212 

Hydrophilic Agent Silica Gel Silica Gel Silica Gel 

Filter Media Polyester Polyester Polyester 

Connection Size (NPT) 1" 1" 1" 

MINIATURE DISPOSABLE BREATHERS 

Model # MOB-BB MOB-1 MOB-OC2 

Unit Size (height, in.) 3 5 2.5 

Unit Diameter (in.) 2.75 2.75 2.625 

Filtration Area (square in.) 4.12 4.12 3.1 

Amount of Silica Gel (oz.) 2 4 x 

Adsorption Capacity (fl.oz.) .4 .8 n/a 

Max. Flow Rate (cfm @1 PSID) 3 3 7 

Filtration (µ absolute) 3 3 3 

Op. Temp. Range (˚F) -20 to 200 -20 to 200 -20 to 200 

Hydrophilic Agent Silica Gel Silica Gel n/a 

Filter Media Polyester Polyester Fiberglass 

Connection Size (NPT) 3/8" 3/8" 3/8" 

Mobil LubeGuard 

Disposable Standard 

Desiccant Breather 

Disposable Desiccant Breathers 

■ Resilient polycarbonate plastic body 

■ Bi-directional, controlled airflow 

■ Multi-tiered filtration process 

■ Water vapor adsorbent 

■ Impact resilient 

■ Color indicator for easy system monitoring 

■ U.V. light inhibitive 

MOB-2 MOB-3 MOB-4 

Please see page 8 for available threaded adaptors 

Miniature Disposable Breathers 

■ Diminuitive design aids installation in confined areas 

■ Oil coalescing breather captures oil mist, protects environment 

MOB-BB

DISPOSABLE STEEL BREATHER 

Model # MOB/DS-6 

Unit Size (height, in.) 6.5 

Unit Diameter (in.) 5 

Filtration area (square in.) 38 

Amount of silica gel (oz.) 24 

Adsorption capacity (fl. oz.) 9 

Max. flow rate (cfm @1.5 PSID) 20 

Filtration (micron) 1 µ 

Operating temperature range (˚F) -20 to +250 

Hydrophilic agent Indicating silica gel 

Filter media Microglass 

Connection size Varies depending on adaptor 

Adaptor required, please choose from various size options. 

Mobil LubeGuard Disposable 

Steel Breathers 

Disposable Steel Breather 

■ Rugged housing ideal for harsh environments, high temperature, 

mobile and nautical applications 

■ Color indicator window for easy system monitoring 

■ Bi-directional, controlled airflow 



■ Resilient construction 

■ 1-micron absolute media 

MOB/DS-6 with recommended, optional 

Flapper Valve adapter MOB-DSV5

HYBRID PUMP BREATHERS 

Model # MOB-P-1X MOB-P4 

Unit Height (in.) 5 

8 

Unit Diameter (in.) 2.75 3.5 

Filtration Area (square in.) 4.12 4.12 

Amount of Silica Gel (oz.) 4.8 4.8 

Adsorption Capacity (fl oz.) .8 .8 

Max. Flow Rate (cfm @1.5 PSID) 1 1 

Filtration (µ absolute) 3 3 

Op. Temp. Range (˚F) -20 to 200 -20 to 200 

Hydrophilic Agent Silica Gel Silica Gel 

Filter Media Polyester Polyester 

Connection Size (NPT) 3/8" 3/8" 

MOB-P4R MOB-P8 MOB-P-1X MOB-P4 

Mobil LubeGuard Pro 

Disposable Hybrid 

Breathers 

Disposable Hybrid Breathers 

■ Hybrid technology breather for low-flow applications (i.e. gearboxes 

and pumps) 

■ Ideal for washdowns and high humidity areas 

■ Desiccant, particulate filtration ensures incoming air is clean and dry 

■ Membrane technology isolates lubes from extreme ambiant humidity 

■ Check valves ensure no excess pressure/vacuum builds 

HYBRID DISPOSABLE BREATHER 

Model # Unit Size Filtration Amount Adsorption Max. Flow Rate Filtration Op. Temp Hydrophilic Filter Connection 

(h x dia., in.) Area (sq.in.) Silica Gel (lbs.) Capacity (cups) (cfm@1 PSID) (µ absolute) Range (˚F ) Agent Media Size 

(slip-fit design) 

MOB-P8 8 x 5 11.2 .9 1 Thermal Expansion/ 

Contraction Only 

3 -20 to 200 Silica Gel Polyester 1"

CONTAMINATION CONTROL BREATHERS 

These breathers are 

designed to filter out 

particles and block water in 

its liquid state from entering 

fluid containing reservoirs. 

MOB-SB-25 with vacuum indicator and MOB-SB-35 


Non-Desiccant Specialty 

Breathers 

Contamination Control Breathers 

■ Creates an impenetrable barrier against water droplets 

■ Pleated element provides a large surface area and is 99.5% 

efficient in blocking 1 micron and larger/ β1>200 particles 

■ Coalesces oil mist, preventing contamination of working 

environment (MOB-SB-35 only) 

■ Optional visual vacuum indicator actuates when maximum 

restriction has been reached 

■ Rugged ABS plastic housing 

■ Easy installation requires hand tighten only 

Model # Unit Size Filtration Amount Max. Flow Rate Filtration Op. Temp Hydrophilic Filter Connection 

(h x dia., in.) Area (sq.in.) Silica Gel (µ absolute) Range (˚F) Agent Media Size (NPT) 

MOB-SB-25 5 x 5 180 n/a 40 cfm @ 1 psid 1 -20 to 200 n/a Polyester 1" 

MOB-SB-35 5 x 5 180 n/a 40 cfm @ 1 psid 1 -20 to 200 n/a Polyester 1"

Mounting Adapters 

Breathers are easily installed using 

one of several adapter options. 

ADAPTOR 

12-T 

UNIT 

ADAPTOR 

15-T 

ADAPTOR 

17-T 

UNIT 

UNIT 

Pressure Indicator 

Adapter 

Single position indicator measures 

air induction system filter restriction. 

Mobil LubeGuard and 


Disposable Breather 

Accessories 

Mobil LubeGuard provides a wide range of disposable 

breather accessories for easy adaption to your specific 

applications and working environment. 

DISPOSABLE UNIT ADAPTERS (USE WITH MOB-2 

MOB-3, MOB-4, MOB-HG-8, MOB-OC8, MOB-VG1, 

MOB-VG-4, MOB-DS6) 

Model # Description 

MOB-10 1" Threaded Adaptor 

MOB-17 1" - 3/4" Threaded Reducer 

MOB-18 1" - 1/4" Brass Threaded Reducer/Adapter 

MOB-11 Hose Clamps 

MOB-12 Field Adaptor 

MOB-15 Flange Adaptor 

MOB-16 Flex Hose 

MOB-ME-2 '2' Breather Manifold 



MOB-HMOB Heavy Duty Clamps for MOB-2, 3, or 4 

MOB-13 1" Slip Fit to 1" Female Threaded Adapter 

MOB-13-PI 1" Slip Fit to 1" Female Threaded Adapter with 

Single Position Vacuum Indicator 

MOB-PI 1/8" Single Position Vacuum Indicator 

MOB-35 3/4" - 3/8" SCH, 40 PVC Reducer Bushing 

MOB-36 1" - 3/8" SCH, 80 PVC Reducer Bushing 

MOB-37 1/2" - 3/8". 40 PVC Reducer Bushing 

MOB-OCM-3 Oil Coalescing Adapter for MOB-2, MOB-3, MOB-4 

MOB-DSA10 1" Threaded Adaptor for Disposable Steel MOB-DS-6 

MOB-DSA-17 3/4” Threaded Adaptor for Disposable Steel MOB-DS-6 

MOB-DSV5 1" Threaded Flapper Valve Adaptor for Disposable Steel 

DISPOSA BLE UNIT A DAPTORS FOR USE WITH 

NEW POLYCARBONATE MOB-2 MOB-3, MOB-4 


MOB-12T New 1" NPT Female Threaded Field Adaptor 

MOB-15T New 1" NPT Female Threaded Brass Flange Adaptor 

MOB-17T New 1" NPT Female -3/4" NPT Male Adaptor 

Flex Hose, 

Hose Clamps 

Flex hose and hose clamps 

are available to aid in remote 

mounting of breathers.


Breathers for High Flow 

Rate, High Volume and 

Harsh Environments 

Carbon or Stainless Steel Breather 

■ Rugged steel housing ideal for very high temperatures, 

extremely dirty air, or corrosive environments 

■ Accommodates large airflow rates with minimal pressure 

drops and high-volume systems (ie. bulk storage tanks) 

■ Bi-directional airflow 



■ Large surface area results in long service life 

■ Sight glass indicator for easy system monitoring 

■ Rebuildable 

Steel Unit Adaptors 

There are several steel unit 

adaptors available to meet 

your needs. 

MOB/CS-20 MOB/CS-6 MOB/CS-30 MOB/CS-4 MOB/CS-10 

(not shown MOB/CS-40) 

CARBON STEEL BREATHERS 

Model Number MOB/CS-4 MOB/CS-6 MOB/CS-10 MOB/CS-20 MOB/CS-30 MOB/CS-40 

Size (height x dia., in.) 10 x 7.2 12 x 9.11 8 x 12.6 27 x 12.6 36 x 12.6 35 x 18 

Filtration Area (square in.) 8.35 427 1,049 1,049 1,049 1224 

Amount of Silica Gel (lbs.) 1.8 4.2 17 34 51 92 

Adsorption Capacity (cups) 1.3 3.1 12.4 24.8 37.2 67.1 

Max. Flow Rate (cfm) 35 @ 1 PSID 105 @ 1 PSID 120 @ .5 PSID 120 @ .5 PSID 120 @ .5 PSID 270 @ 1 PSID 

Filtration (µ absolute) 1 1 1 1 1 4 

Op.Temp. Range (°F) -20 to 250 -20 to 250 -20 to 250 -20 to 250 -20 to 250 -20 to 250 

Hydrophilic Agent Silica Gel Silica Gel Silica Gel Silica Gel Silica Gel Silica Gel 

Connection Size (NPT) 1" 2" 3" 3" 3" 4-6" 

STAINLESS STEEL BREATHERS 

Model Number MOB/SS-4 MOB/SS-6 MOB/SS-10 MOB/SS-20 MOB/SS-30 MOB/SS-40 

Size (height x dia., in.) 10 x 7.2 12 x 9.1 18 x 12.6 27 x 12.6 36 x 12.6 35 x 18 

Filtration Area (square in.) 8.35 427 1,049 1,049 1,049 1224 

Amount of Silica Gel (lbs.) 1.8 4.2 17 34 51 92 

Adsorption Capacity (cups) 1.3 3.1 12.4 24.8 37.2 67.1 

Max. Flow Rate (cfm) 35 @ 1 PSID 105 @ 1 PSID 120 @ .5 PSID 120 @ .5 PSID 120 @ .5 PSID 270 @ 1 PSID 

Filtration (µ absolute) 1 1 1 1 1 4 

Op.Temp. Range (°F) -20 to 250 -20 to 250 -20 to 250 -20 to 250 -20 to 250 -20 to 250 

Hydrophilic Agent Silica Gel Silica Gel Silica Gel Silica Gel Silica Gel Silica Gel 

Connection Size (NPT) 1" 2" 3" 3" 3" 4-6"

STEEL UNIT ADAPTERS AND REPLACEMENT COMPONENTS 


MOB-13-4C Steel Adaptor for MOB/CS-4 

MOB-13-4C-SS Stainless Steel Adapter for MOB/SS-4 


MOB-13-6C-SS Stainless Steel Adaptor for MOB/SS-6 


MOB-13-10C-SS Stainless Steel Adaptor for MOB/SS-10 

MOB-4D Desiccant Bag Filter for MOB/CS-4 or MOB/SS-4 

MOB-6D Desiccant Bag Filter for MOB/CS-6 or MOB/SS-6 

MOB-10D Desiccant Bag Filter for MOB/CS-10, MOB/SS-10, MOB/CS-20, 

MOB/SS-20, MOB/CS-30, or MOB/SS-30 

MOB-4F/1 Pleated Filter Element for MOB/CS-4 or MOB/SS-4 

MOB-6F/1 Pleated Filter Element for MOB/CS-6 or MOB/SS-6 

MOB-10F/1 Pleated Filter Element for MOB/CS-10 or MOB/SS-10, 20 or 30 

MOB-14D Desiccant Bag Filter for MOB/OCD-14, CS-40, or SS-40 

MOB-14F/1 Pleated Filter Element for MOB/CS-40 


Breathers that Protect 

the Working Environment 

Oil Coalescing Steel Breathers 

■ Rugged steel housing ideal for harsh environments, extreme dirt 

and high temperatures 

■ Ideal for injection molding, stamping applications 

■ Captures and recycles oil back into system 

■ Prevents contamination of the working environment 

Replacement 

Filter Element 

The pleated filter 

element is one component 

of the steel rebuild kit. 

CARBON STEEL OIL COALESCING BREATHERS 

Model # Unit Size Filtration Amount Adsorption Max. Flow Rate Filtration Op. Temp Hydrophilic Filter Connection 

(h x dia., in.) Area (sq.in.) Silica Gel (lbs.) Capacity (cups) (cfm@1 PSID) (µ absolute) Range (ºF) Agent Media Size (NPT) 

MOB/CS-10-OC 8 x 5 15 17 9.5 170 1 -20 to 200 Silica Gel Microglass 3" 

MOB/OCD-14 8 x 12.6 1224 23 9.5 170 4 -20 to 250 Silica Gel Polyester 4-6" 

MOB/OCD-14

Mobil LubeGuard Filter Carts 

It pays to be proactive. 

Mobil LubeGuard filter carts offer complete 

customization. 

Mobil fluid handling systems incorporate smart technology to make fluid handling a 

simple task, requiring less equipment and labor while reducing system contamination. 

Off-line filtration units effectively filter fluids used in hydraulic and lube oil systems. By 

removing dirt and moisture, your equipment and lubricants can run longer and harder. 

Our Mobil LubeGuard filter carts offer complete customization. The following 

specifications are basic highlights of all possible combinations of the filter carts. 

Filter cart features & benefits: 

■ Heavy duty cart with oil catch pan 

■ Industrial powder coated paint 

■ Pneumatic wheels 

■ Two filters provide two-stage filtration 

■ 12’ long hose assemblies 

■ Clear PVC with steel wire reinforced hoses 

■ Easy-to-read filter gauges indicate filter condition 

■ Automatic filter bypass set at 25 PSID 

■ Quick Couplers eliminate messy leaks 

Pump and Motor Specifications: 

■ Various flow capacities to filter various hydraulic and gear lubricants 

■ 1 – 1.5 HP, 110/220 VAC, 1 phase, 60 Hz, TEFC motor with overload switch 

■ Standard 25’ electric cord 

■ Continuous flow air driven pumps 

Basic Specifications: 

Height: 46” 

Width: 22” 

Weight: Unit weight 140 lbs. (Shipping weight is approximately 180 lbs. Weight will 

vary with model options.) 

Filter Options: 

• High capacity spin-on filters available in 3, 6, 12, 25 micron at βx>200 

• Water absorbing element also available 

Options: 

• Pump safety relief valve set at 65 PSID • Filter bypass for fluid transfer only 

• 25’ electric cord reel • Sample ports in two locations 

• Various hose end connections • Customizable colors

Visit www.des-case.com/mobillubeGuard to specify your cart with our interactive, user-friendly code and cart customizer. 

How to order Mobil LubeGuard Filter Cart Series: 

Select the desired symbol (in the correct position) to construct a model code or go to the above web address for 

fast, helpful service. Then contact your local distributor or call Mobil if you don't see the options you need or would 

like additional assistance. 

M 

[Box 1] [Box 2] [Box 3] [Box 4] [Box 5] [Box 6] [Box 7] [Box 8] [Box 9] [Box 10] [Box 11] [Box 12] 

PUMP [Box 1] 

Code Description 

* = SUS @ 100˚F 

02E 2 gpm / 1 hp electric (for ISO 68 / 325 SUS* and above) / 

110 VAC 

05E 5 gpm / 1 hp electric (for viscosity below ISO 68 / 325 

SUS) / 110 VAC 

10E 10 gpm / 1 hp electric (for viscosity below ISO 68 / 325 


20E 20 gpm / 1.5 hp electric (for viscosity below ISO 68 / 325 


02F 2 gpm / 1 hp electric (for ISO 68 / 325 SUS* and above)/ 

220 VAC 

05F 5 gpm / 1 hp electric (for viscosity below ISO 68 / 325 


10F 10 gpm / 1 hp electric (for viscosity below ISO 68 / 325 


20F 20 gpm / 1.5 hp electric (for viscosity below ISO 68 / 325 


02A 2 gpm / .95 hp Air (for ISO 68 / 325 SUS* and above) 

08A 8 gpm / .95 hp Air (for viscosity below ISO 68 / 325 SUS) 

FILTER A [Box 6] 


A 

3-micron particulate Filter 

B 


C 


D 


J 

Water Filter 

SAMPLE PORTS [Box 9] 


0 

No Sample Ports 

1 

Sample Ports 

ExxonMobil Fluid 

Handling Support 

Hotline: (866) 662-4554. 

DRAIN CONNECTOR / 

SUCTION SIDE * [Box 2] 


F Flush Face 

Connector 

A ISO A Connector 

B ISO B Connector 

W Wand Connector 

N Threaded End 

*= All are coupler ends (female) 

FILL CONNECTOR / 

PRESSURE SIDE * [Box 4] 


F Flush Face Connector 



W Wand Connector 

N Threaded End 

*= All are coupler ends (female) 

FILTER B [Box 7] 


A 3-micron particulate Filter 

B 6-micron particulate Filter 

C 12-micron particulate Filter 

D 25-micron particulate Filter 

J Water Filter 

ELECTRIC CORD [Box 10] 


1 

25 foot Cord 

2 

25 foot Cord Reel (not available for 20gpm/1.5hp pump) 

4 


HOSE SIZE [Box 3] 


3 † 1/2 inch 

3/4 inch 

5 

7 

1 inch 

†=not for 20 gpm 




3 † 1/2 inch 

3/4 inch 

5 

7 

1 inch 


FILTER BYPASS [Box 8] 


0 

No Bypass 

1 

Filter Bypass 

SAMPLE RELIEF VALVE* PORTS [Box 11] 9] 


0 

No Relief Valve 

11 

Relief Valve

FILL CONNECTOR 

VACUUM INDICATOR 

FILL CONNECTOR 

FILL TUBE 

DRAIN CONNECTOR 

HYDRAULIC ADAPTER 

HYDRAULIC ADAPTER 

DRUM ADAPTER 

OPTIONAL SAMPLE PORT NOT SHOWN 

BREATHER PORT 

BUNA-N GASKET 

ADAPTOR 

FILL TUBE 

DRAIN TUBE 

DRAIN CONNECTOR 

Mobil LubeGuard Adaptor 

Kit Series 

It pays to be proactive. 

Mobil LubeGuard Adaptor Kit Series reduce 

system contamination. 

Make fluid handling a simple task, requiring less equipment and labor while 

reducing system contamination. 

Off-line filtration units effectively filter fluids used in hydraulic and lube oil 

systems. By removing dirt and moisture, your equipment and lubricants can 

run longer and harder. 

Our Mobil LubeGuard Adaptor Kit Series offer complete customization. The 

following specifications are basic highlights of all possible combinations of the 

Adaptor Kit Series. 

Adaptor Kit Series Features & Benefits: 

■ Our replaceable breathers are used to prohibit the entry of particulate 

contamination. 

■ Single position vacuum indicator actuates when maximum filter restriction has 

been reached and is included in all Hydraulic Adaptor Kits. 

■ Desiccant changes colors indicating replacement is needed, when maximum 

moisture adsorption is reached. 

■ Sample port is available with sample tubes of any length. 

■ 6-bolt hole mounting for the Hydraulic Kit. 

Filter Options: 

■ Mobil LubeGuard disposable dessicant breathers are manufactured in three 

main sizes, MOB-2, MOB-3, and MOB-4 to accommodate different mounting 

space requirements. 

■ The pleated element of the MOB-SB-25 and MOB-SB-35 provides a large 

surface area and is 99.5% efficient in blocking particles 1µ and larger.

How to order Mobil LubeGuard Adaptor Kit Series Series: 

Select the desired symbol (in the correct position) to construct a model code. Then contact your local distributor or call 

ExxonMobil if you don't see the options you need or would like additional assistance. 

M 

[Box 1] [Box 2] [Box 3] [Box 4] [Box 5] [Box 6] [Box 7] [Box 8] [Box 9] 

ADAPTOR TYPE [Box 1] 


H Hydraulic Adaptor 

D Drum Adaptor 


PRESSURE SIDE * [Box 4] 


F Flush Face Connector 



*= All are plug ends (male) 

SAMPLE PORT [Box 7]** 


0 

No Sample Port 

1 

Sample Port 

**= Enter 0 for the Drum Adaptor. 




3 † 1/2 inch 

3/4 inch 

5 

7 

1 inch 


BREATHER FILTER [Box 9] * 


2 

3-micron particulate desiccant breather [MOB-2] 

3 


4 


25 

1-micron particulate non-desiccant breather [MOB-SB-25] 

35 

1-micron particulate non-desiccant, 

oil-coalescing breather [MOB-SB-35] 

*= For breather replacement, use bracketed number. 

ExxonMobil Fluid 

Handling Support 

Hotline: (866) 662-4554. 


SUCTION SIDE * [Box 2] 


F Flush Face 

Connector 



*= All are plug ends (male) 




3 † 1/2 inch 

3/4 inch 

5 

7 

1 inch 


FILL TUBE LENGTH (INCHES)** [Box 6] 


Enter 2 digits for your prefered length* 

*= For example, enter 08 for 8 inches long 

**= The recommended length for a drum adaptor is 6 inches 

DRAIN OR SAMPLE TUBE LENGTH [Box 8]** 


Enter 2 digits for your prefered length*† 

*= For example, enter 08 for 8 inches long 

**= This is either the Drain Tube for the Drum Adaptor or the 

Sample Tube for the Hydraulic Adaptor, not both. 

†= The recommended length for a drain tube on a 55-gallon 

drum is 35 inches.

ExxonMobil Lubricants & 

Specialties Company 

3225 Gallows Road 

Fairfax, Virginia 22037 

Mobil LubeGuard Contamination Control 

Product Support 

Hotline: (866) 662- 5554 

Mobil Technical Call Center: 

(800) 662- 4525 

www.mobil.com 

© 2006 ExxonMobil Corporation 

® The Mobil and ExxonMobil logotypes 

and the Pegasus design are registered 

trademarks of the ExxonMobil Corporation or 

one of its subsidiaries. 

Mobil LubeGuard, Mobil LubeguardPro, 

and the ‘It pays to be proactive’ tagline are 

trademarks of ExxonMobil Corporation 

or one of its subsidiaries. 

Breathers should be disposed of as any oil 

filter, as a small amount of oil is collected in 

service. Please consult your local and state 

regulations and dispose of accordingly. 

MSDS available upon request. 

Printed in (USA) TPMOBBR0902

Mobil LubeGuard Pro Disposable Hybrid Breathers - Bob Johnson ...

Create successful ePaper yourself

Delete template?

Save as template?