Transmission Chain catalogue
Transmission Chain catalogue
Transmission Chain catalogue
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Steel Industry <strong>Chain</strong><br />
Key Applicational Areas<br />
• Casting<br />
• Coil handling<br />
• Coil treatment<br />
• Sheet handling<br />
• Raw material processing<br />
• Slab handling<br />
• Steel section manufacture/handling<br />
• Tube manufacture<br />
Hot Dip Coating Line<br />
<strong>Transmission</strong> chain for accumulators used on<br />
steel works processing lines.<br />
Accumulator <strong>Chain</strong><br />
When coils of thin steel plate have been<br />
produced it is sometimes required to be<br />
coated - painted, galvanised or plastic coated.<br />
Obviously, the coating process, whichever type<br />
it is, necessitates numerous operations and<br />
tight control - especially the speed at which<br />
the steel passes through the process area. It is,<br />
therefore, necessary that the steel plate being<br />
coated passes through the process section at<br />
a constant speed and is continuous and<br />
uninterrupted.<br />
Renold <strong>Transmission</strong> <strong>Chain</strong> Catalogue I 91<br />
For this reason it is necessary to accumulate<br />
the steel plate before the process area to allow<br />
time, say 2 to 3 minutes, so that when the end<br />
of the coil is reached a new coil can be positioned<br />
and the beginning of the new one welded to<br />
the end of the previous one.<br />
Section 2