21.03.2013 Views

JACKODUR Plus 300 Standard - JACKON Insulation GmbH

JACKODUR Plus 300 Standard - JACKON Insulation GmbH

JACKODUR Plus 300 Standard - JACKON Insulation GmbH

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>300</strong> <strong>Standard</strong><br />

High-performance insulation made<br />

of extruded polystyrene foam (XPS)<br />

Superb insulating performance<br />

l D = 0,027 W/(m. K)<br />

regardless of the thickness!<br />

<strong>JACKODUR</strong> <strong>Plus</strong> is high-performance insulation made of<br />

extruded polystyrene foam (XPS) in compliance with<br />

EN 13164 that offers superb insulation properties and<br />

thus effectively helps to save energy in buildings.<br />

At the same time, <strong>JACKODUR</strong> features all of the trusted<br />

properties of XPS heat insulation: compression proof,<br />

dimensionally stable, and moisture and rot resistant, and<br />

enables the design of very slimline structures.


Main applications:<br />

n Insulating exterior cellar walls<br />

n Insulating underneath the floor<br />

plate to the ground<br />

n Insulating underneath screed without<br />

soundproofing requirements<br />

n Gravel-covered inverted roof<br />

n Insulating the topmost ceiling<br />

n Core insulation<br />

*all figures are averages, to calculate on the safe side, use μ=80 or μ=250<br />

<strong>JACKODUR</strong> <strong>Plus</strong> <strong>300</strong> <strong>Standard</strong>: Technical specifications<br />

Available thicknesses (mm) 50 60 80 100 120 140 160 180 200 220 240 260 280 <strong>300</strong> 320<br />

Thermal conductivity l D W/(m·K) EN 13164 0,027<br />

Thermal resistance RD m·K/W EN 13164 1,85 2,20 2,95 3,70 4,40 5,15 5,90 6,65 7,40 8,10 8,85 9,60 10,35 11,10 11,85<br />

Water vapour diffusion resistance factor μ* - EN 12086 140 130 120 110 140 140 140 140 140 140 140 140 140 140 140<br />

Compressive at stress 10% deformation<br />

or compressive strength<br />

Compressive creep<br />

(50 years, deformation < 2 %)<br />

Reaction to fire -<br />

Long term water absorption<br />

by total immersion<br />

<strong>300</strong> <strong>Standard</strong><br />

kPa EN 826 <strong>300</strong><br />

kPa EN 1606 130<br />

EN<br />

13501-1<br />

Euroclass E<br />

% EN 12087 ≤ 0,3<br />

Long term water absorption by diffusion % EN 12088 ≤ 3<br />

Freeze-thaw resistance Klasse EN 12091 FT2<br />

Application temperature limit °C -50 bis +75<br />

Surface skin<br />

Possible edge profiles shiplap<br />

<strong>JACKON</strong> <strong>Insulation</strong> <strong>GmbH</strong> n Carl-Benz-Straße 8 n D-33803 Steinhagen<br />

Telephone +49 5204 9955-0 n Telefax +49 5204 9955-400<br />

info@jackodur.com n www.jackon-insulation.com<br />

<strong>JACKODUR</strong>®, JACKOBOARD®, JACKOCARE®<br />

are registered trademarks of<br />

<strong>JACKON</strong> <strong>Insulation</strong> <strong>GmbH</strong>.<br />

Subject to error and amendments.<br />

Art.-Nr. 4508024 . 03/2013

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!