Skinning Knives, Cable Strippers, Cable Benders, Chamfering Tools

More documents

Recommendations

Info

Cable Prep Tools 262 4 X 4 CABLE STRIPPER 36001H Tool Body shown with four different cutting heads attached Get on-the-job versatility with four interchangeable cutting heads on one compact, lightweight, end stripper. Performs fast, precise, cuts on insulated secondary type cables and others, both overhead and underground with PVC or polyethylene insulation. Design your own tools by selecting cutting heads for #6AWG to 500 MCM cable with insulation thickness' from 45 to 110 mils. Cutting head combinations can be modified in the field as cable requirements change from job to job. Blades in cutting heads listed in table make Square Cuts. Heads available with Chamfer blades upon request. Ordering Information: Cat. No. 36001H Tool Body Only Specify desired Cutter Head part numbers from table. Tool Body will hold up to 4 cutting heads at a time. Replacement Blades Cat. No. 19207 Square Cut Blade Cat. No. 33690 Chamfer Blade SQUARE CHAMFER HI-LINE UTILITY SUPPLY CO. Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com Special sizes available upon request. For COMPACTED Cable For COMPRESSED Cable For CONCENTRIC Cable CABLE PREP TOOLS CONCENTRIC COMPRESSED COMPACTED Insulation Thickness Cable 60 Mil 80 Mil 95 mil Size Max OD Cat. No. Max OD Cat. No. Max OD Cat. No. 6 .315 10-32540 - - .390 10-40075 4 .365 10-37540 - - - - 2 .440 10-45040 .465 10-47560 - - 1 .465 10-47540 .515 10-52560 - - 1/0 .515 10-52540 .565 10-57560 .590 10-60075 2/0 .565 10-57540 .590 10-60060 .640 10-65075 3/0 .615 10-62540 .665 10-67560 .690 10-70075 4/0 .665 10-67540 .715 10-72560 .740 10-75075 250 - - .765 11-77560 .790 11-80075 350 - - .865 11-87560 .890 11-90075 500 - - .990 11-100060 1.040 11-105075 6 .315 10-32540 - - .390 10-40075 4 .365 10-37540 - - - - 2 .440 10-42540 .465 10-47560 - - 1 .465 10-47540 .515 10-52560 - - 1/0 .515 10-50040 .565 10-55060 .590 10-60075 2/0 .565 10-55040 .590 10-60060 .640 10-62575 3/0 .615 10-60040 .665 10-65060 .690 10-67575 4/0 .665 10-67540 .715 10-70060 .740 10-75075 250 - - .765 10-75060 .790 11-77575 350 - - .865 11-85060 .890 11-90075 500 - - .990 11-97560 1.040 11-102575 6 .315 10-32540 - - .390 10-40075 4 .365 10-37540 - - - - 2 .440 10-42540 .465 10-47560 - - 1 .465 10-45040 .515 10-50060 - - 1/0 .515 10-47540 .565 10-52560 .590 10-57575 2/0 .565 10-52540 .590 10-57560 .640 10-60075 3/0 .615 10-57540 .665 10-62560 .690 10-65075 4/0 .665 10-62540 .715 10-67560 .740 10-70075 250 - - .765 10-72560 .790 11-75075 350 - - .865 11-80060 .890 11-85075 500 - - .990 11-92560 1.040 11-97575
CABLE PREP TOOLS HI-LINE UTILITY SUPPLY CO. Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com 263 ADJUSTABLE CABLE STRIPPERS Cat. No. WS64-U-E Cat. No. CB236 Replacement Blade The WS64-U-E replaces the WS61. It to is an Adjustable Stripper takin g all the work out of power cable stripping. It will quickly and efficiently remove cable jackets and insulations of various materials and thicknesses up to 500 mils including tough polyethylene encapsulated jackets. Handle operation is effortless, even on tough insulation materials . The WS64-U-E will not nick the conductor or concentric! When using as an end stripper, the stop bar accessory is used to obtain an exact stripped conductor length; first time, every time. Add suffix M for combo end and midspan. Repl. Blade No. CB236 • PRECISE BLADE ADJUSTMENT UP TO 2.50" • WILL NOT NICK CONDUCTOR OR CONCENTRIC • STRIPS U R D CABLES IN SECONDS • TWO HANDLES FOR EASY TURNING • REMOVES JACKETS OF ALL TYPES • ADJUSTS TO CABLE O.D. AND CUTTING DEPTH • LENGTH 14-1/2" Cat. No. 1820 Use this tool for easy and rapid preparation of round cables from .18" up to 1" diameter and 8AWG up to 500MCM. Our 1820 offers an adjustable incision depth up to .118". A pivoting blade makes spiral or longitudinal cuts and a spring loaded cable support arm with beveled, leading edge assists with insulation removal. A replacement blade is included and stored in the handle. The 1820 can also be used to score semi-con shield. Specific bushings are available to fix blade depth for this application upon request. Cat. No. 2109 Replacement Blade ADJUSTABLE SEMI-CON SCORERS The "Banana Peeler" adjustable semi-con scoring tool removes up to 90 mil. of "strippable" semicon shield cleanly without damage to underlying insulation. Cat. No. Description BP-1A 3/4" - 1-1/4" Semi-Con Scoring Tool BP-2A 1-1/4" - 2" Semi-Con Scoring Tool 34230 Replacement Blade Cat. No. 1700-SS This scorer is designed to score the extruded semiconductive shield of high voltage cable so that the semicon can be removed without nicking or damaging the cable insulation. Removal of PVC outer jackets can also be done with this scorer. Set screw locks blade depth. Repl. Blade No. 1678 • ADJUSTABLE BLADE DEPTH FROM .001” - .100” • FOR USE ON 1/2”-2” CABLES • SQUARE AND SPIRAL CUT SETTINGS Cat. No. 1800-SS Same as above but for larger cable with a 1-3/4” - 3” outside diameter. CHAMFER TOOL Cat. No. IC1 This adjustable Chamfer Tool creates a 45° bevel on 15 to 35kv, .65 to 1.26 O.D. cable. Cat. No. IC2 1.25 - 1.875 Cat. No. CB163 1.25" -1.875" Replacement Blade WS SNAP Cat. No. WS68SNAP Adds a bushing quick disconnect feature eliminating the need for a hex wrench. This tool uses bushings on pg. 262. Cable Prep Tools
Page 1: CABLE PREP TOOLS HI-LINE UTILITY SU
Page 5 and 6: BUSHING INSERT TOOLS This model is
Page 7 and 8: 1542-2CL Stripper w/1646X Gauge Cat
Page 9 and 10: B LEAD SLEEVE SLITTER Cat. No. 0744
Page 11: HI-LINE UTILITY SUPPLY CO. Phone: 8

Skinning Knives, Cable Strippers, Cable Benders, Chamfering Tools

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?