Surgical & Microdissection Tools - Experimetria

MICRODISSECTION MICROSURGERY 

Surgical & Microdissection Tools 

Forceps & Tweezers 

Scissors 

Needle Holders 

Clips & Clamps 

Forceps by Dumont . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109 

Economy Fine Tweezers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 

Ceramic-tip Forceps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 

Forceps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 

Tissue & Dressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 

Cupped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120 

Round-handled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 

Filter Forceps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122 

Hemostatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123 

Vannas & Other Spring Scissors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126 

Titanium Spring Scissors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129 

Ring Scissors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132 

Ceramic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 

Round-handled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 

Microintraocular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 

Micro & Castroviejo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143 

Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144 

Olsen-Hegar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146 

Needles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147 

Clips & Applying Forceps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148 

Vessel Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149 

Bulldog Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150 

Retractors, Knives, & Cutters 

Retractors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 

Sapphire Knives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154 

Scalpel Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155 

Ear Punches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157 

Rongeurs & Bone Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157 

Hooks and Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 

Dermal Punches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166 

Surgical Accessories & Animal Handling Gloves 

Electrosurgery 

Instrument Care 

Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165 

Rodent Guillotine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165 

Binocular Loupes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167 

Surgery Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168 

Disposable Cautery Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169 

Thermal Cautery Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 

High Freequency Dessicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 

Electrosurgical Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 

OmniDrill35 Micro Drill System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 

Care & Handling of Surgical Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142 

Instrument Protection Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 

Ultrasonic Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 

Dry Sterilizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 

Cleaning Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 

Prices shown are in U.S. dollars. Actual charges will vary because of import duty, freight, and currency fluctuations. To obtain an exact quotation, contact your WPI office. 

108 UK: Tel: 01438-880025 • wpiuk@wpi-europe.com Germany: Tel: 030-6188845 • wpide@wpi-europe.com China: Tel: 21 68885517 • chinasales@china.wpiinc.com

Forceps by Dumont 

Mini Dumont #M5S 

Material: Stainless Steel 

Length: 8 .2cm 

Tips: 0 .09 x 0 .05 mm 

501764 . . . . . . . . . . . . . . . US$ 23 

Dumont #1 

Material: Inox 

Length: 12 cm (4 .75 in .) 

Tips: 0 .20 x 0 .12 mm 

500335 . . . . . . . . . . . . . . US$ 25 

Tip Profile: 

Dumont #1 

Material: Stainless steel, Medical Biology 

Length: 12 cm long (4 .75 in .) 

Tips: 0 .1 x 0 .06 mm 

500229 . . . . . . . . . . . . . . . 

Tip Profile: 

US$ 43 

Dumont #2 


Length: 12 cm (4 .75 in .) 

Tips: 0 .34 x 0 .14 mm tips 

500336 . . . . . . . . . . . . . . . . . US$ 25 

Tip Profile: 

Dumont #2 


Length: 12 cm (4 .75 in .) 

Tips: 0 .17 x 0 .07 mm 

Tip Profile: 

500230 . . . . . . . . . . . . . . US$ 38 

Dumont #3C 

Material: Dumostar, Biology, non-magnetic, non-corrosive 

Length: 11 cm (4 .3 in .) 

Tips: 0 .08 x 0 .04 mm 

500064 . . . . . . . . . . . . . . 

Tip Profile: 

US$ 44 

Dumont #3 

Material: Dumostar, Biology, non-magnetic, 

non-corrosive 

Length: 12 cm (4 .75 in .) 

Tips: 0 .08 x 0 .04 mm 

Tip Profile: 

500337 . . . . . . . . . . . . . . . US$ 43 

Dumont #3 


Length: 12 cm (4 .75 in .) 

Tips: 0 .17 x 0 .10 mm tips 

500338 . . . . . . . . . . . . . . US$ 26 

Dumont #3 

Material: Flat, long, narrow 

Length: 12 cm (4 .75 in .) 

Tips: 0 .20 x 0 . .12 mm tips 

503235 . . . . . . . . . . . . . . . US$ 50 

Tip Profile: 

For material information and instrument purchase guidance 

visit www.wpiinc.com 


World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: sales@wpiinc .com • Internet: www.wpiinc.com 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

109 

MICRODISSECTION MICROSURGERY


Dumont #4 

Material: Dumostar, Biology, non-magnetic, 

non-corrosive 

Length: 11 cm (4 .3 in .) Tip Profile: 

Tips: 0 .06 x 0 .02 mm 

500339 . . . . . . . . . . . . . . US$ 48 

Dumont #4 


Length: 11 cm (4 .3 in .) 

Tips: 0 .13 x 0 .08 mm 

500340 . . . . . . . . . . . . . . US$ 28 

Dumont #4 

Tip Profile: 



Tips: 0 .02 x 0 .06 mm Mod Tip Profile: 

500231 . . . . . . . . . . . . . . . US$ 46 

Dumont #5 

Material: Dumostar, Medical Biology, 

non-magnetic, non-corrosive 


Tips: 0 .025 x 0 .015 mm 

500085 . . . . . . . . . . . . . . 

Tip Profile: 

US$ 71 

Dumont #5 


Length: 11 cm (4 .3 in .) 

Tips: 0 .025 x 0 .005 mm 

501985 . . . . . . . . . . . . . . . US$ 72 

Dumont #5 

Material: Dumostar, non-magnetic, non-corrosive 

Length: 11 cm (4 .3 in .) 

Tips: 0 .1 x 0 .06 mm Tips 

500233 . . . . . . . . . . . . . . 

Tip Profile: 

US$ 46 

Dumont #5 

Material: Dumoxel, non-magnetic stainless steel 

Length: 11 cm (4 .3 in .) 

Tips: 0 .1 x 0 .06 mm tips 

14098 . . . . . . . . . . . . . . . 

Tip Profile: 

US$ 32 

Dumont #5 


Length: 11 cm (4 .3 in .) 

Tips: 0 .10 x 0 .06 mm 

500342 . . . . . . . . . . . . . . US$ 30 

Dumont #5 

Material: Inox, Biology 

Length: 11 cm (4 .3 in .) 

Tips: 0 .05 x 0 .01 mm tips 

500341 . . . . . . . . . . . . . . US$ 36 

Tip Profile: 

Tip Profile: 

Finest tips 

available 

MOST 

POPULAR! 


110 UK: Tel: 01438-880025 • wpiuk@wpi-europe.com Germany: Tel: 030-6188845 • wpide@wpi-europe.com China: Tel: 21 68885517 • chinasales@china.wpiinc.com 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1

Dumont AntiMagnetic 


Length: 70mm 

Tips: Thickness:10mm, Width 0 .17mm 

503366 . . . . . . . . . . . . . . US$ 24 

Dumont Dumoxel 


Length: 70mm 

Tips: Thickness: 0 .04mm, Length 0 .08mm 

503368 . . . . . . . . . . . . . . US$ 32 

Dumont Dumoxel 


Length: 70mm 

Tips: Thickness: 0 .08mm, Length 0 .17mm 

503367 . . . . . . . . . . . . . . . US$ 24 

Dumont #5 


Length: 11 cm (4 .3 in .) 

Tips: 0 .05 x 0 .01 mm 

14095 . . . . . . . . . . . . . . . . Tip Profile: 

US$ 43 

Dumont #5 

Material: Dumoxel, self-closing 

Length: 11 cm (4 .3 in .) 

Tips: 0 .1 x 0 .06 mm 

501203 . . . . . . . . . . . . . . US$ 41 

Dumont #5 

Material: Inox, Biology, self-closing 

Length: 11 cm (4 .3 in .) 

Tips: 0 .05 x 0 .01 mm 

501202 . . . . . . . . . . . . . . US$ 38 

Dumont #5 

Material: Medical, 90° bent 

Length: 11 cm (4 .3 in .) 

Tips: 0 .05 x 0 .01 mm 

501201 . . . . . . . . . . . . . . . US$ 43 

Dumont #5 

Tip Profile: 

Tip Profile: 

Tip Profile: 

Dumont #5 

Material: Stainless steel, Medical Biology, bent at 45° 

Length: 

Tips: 

11 cm (4 .3 in .) 

0 .05 x 0 .01 mm 

Tip Profile: 

14101 . . . . . . . . . . . . . . . . US$ 47 


Length: 11 cm (4 .3 in .) 

Tips: 0 .02 x 0 .06 mm half curved 

500232 . . . . . . . . . . . . . . Tip Profile: 

US$ 48 



1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

111 



Dumont #5 

Material: Titanium 

Length: 11 cm (4 .3 in .) 

Tips: 0 .1 x 0 .06 mm 

14096 . . . . . . . . . . . . . . . US$ 40 

Dumont #5B 

Material: Inox, Biology, bent at 45° 

Length: 11 cm (44 .3 in .) 

Tips: 0 .05 x 0 .01 mm 

500234 . . . . . . . . . . . . . . US$ 41 

Dumont #7 

Material: Dumoxel, non-magnetic 

stainless steel 

Length: 12 cm (4 .75 in .) 

Tips: 0 .17 x 0 .1 mm Tip Profile: 

14188 . . . . . . . . . . . . . . . . US$ 41 

Dumont #7 


Length: 12 cm (4 .75 in .) 

Tips: 0 .17 x 0 .1 mm 

14097 . . . . . . . . . . . . . . . . 

Tip Profile: 

US$ 34 

Dumont #7 

Tip Profile: 

Material: stainless steel 

Length: 11 cm (4 .3 in .), curved, serrated jaws 

Tips: 0 .17 x 0 .10 mm 

Tip Profile: 

501302 . . . . . . . . . . . . . . US$ 59 

Dumont #7 

Material: Inox, Biology, self-closing, 

Length: 12 cm (4 .75 in .) 

Tips: 0 .07 x 0 .03 mm, curved 

501205 . . . . . . . . . . . . . . Tip Profile: 

US$ 38 

Tip Profile: 

Dumont #55 

Material: Dumostar, Biology, non-magnetic, non-corrosive 

Length: 11 cm (4 .3 in .) 

Tips: 0 .05 x 0 .01 mm 

500235 . . . . . . . . . . . . . . 

Tip Profile: 

US$ 53 

Dumont #55 

Material: Stainless Steel, Biology 

Length: 11 cm (4 .3 in .) 

Tips: 0 .05 x 0 .01 mm 

14099 . . . . . . . . . . . . . . . US$ 36 

Tip Profile: 

Tip Profile: 

Dumont #6 

Material: Stainless Steel, Medical 

Length: 12 cm (4 .75 in .) sharp points 

Tips: 0 .17 x 0 .1 mm 

501204 . . . . . . . . . . . . . . 

Tip Profile: 

US$ 40 

Dumont #7 

Material: Titanium 

Length: 12 cm (4 .75 in .) 

Tips: 0 .17 x 0 .1 mm 

14187 . . . . . . . . . . . . . . . . US$ 42 



1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1

Dumont #7 

Material: Dumoxel, Biology, self-closing 

Length: 12 cm (4 .75 in .) 

Tips: 0 .08 x 0 .04 mm 

501206 . . . . . . . . . . . . . . Tip Profile: 

US$ 46 

Dumont #7 

Material: Flat and rounded, self-closing 

Length: 12cm long 

Tips: 1 .50 x 0 .20 mm 

503234 . . . . . . . . . . . . . . US$ 72 

Dumont Forceps 

Material: Flat and rounded 

Length: 130mm 

Tips: 0 .60 x 020mm 

503232 . . . . . . . . . . . . . . US$ 54 

Dumont Forceps 

Material: Wide square tips 

Length: 120mm 

Tips: 2 .00 x 0 .20mm 

503233 . . . . . . . . . . . . . . US$ 56 

Dumont Fine Tip 

Material: Stainless steel, non-magnetic 

Length: 135mm 

Tips: 45° Bent tips 

503290 . . . . . . . . . . . . . . US$ 58 

Dumont Fine Tip 

Material: Stainless steel, non-magnetic 

Length: 135mm 

Tips: Straight 

503291 . . . . . . . . . . . . . . US$ 38 

Dumont Tweezers 

Length: 115mm 

Tips: Serrated, 0 .17 x 0 .10mm, 

503369 . . . . . . . . . . . . . . US$ 32 

Dumont Vessel Cannulation Forceps 

Length: 13cm 

Cannulation: 0 .5mm OD 

503374 . . . . . . . . . . . . . US$ 179 


Length: 13cm 


503373 . . . . . . . . . . . . . US$ 182 


Length: 13cm 


503375 . . . . . . . . . . . . . US$ 168 



1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

113 



Economy Fine Tweezers 

Made of quality stainless steel, these tweezers are useful for general dissections where ultrafine tips are not necessary . Economically priced per 

package of 6, they are affordable enough for everyone to have their own instruments . 

Economy Tweezer Style 1 


Length: 11 cm (4 .3 in .) 

Tips: 0 .45 x 0 .55 mm 

501974-6 . . . . . . . . . . . . . US$ 49 

501974 . . . . . . . . . . . . . . . US$ 12 



Length: 11 cm (4 .3 in .) 

Tips: 0 .40 x 0 .55 mm 

501975-6 . . . . . . . . . . . . . US$ 49 

501975 . . . . . . . . . . . . . . . US$ 12 



Length: 11 cm (4 .3 in .) 

Tips: 0 .20 x 0 .40 mm 

501976-6 . . . . . . . . . . . . . US$ 49 

501976 . . . . . . . . . . . . . . . US$ 12 

Economy Tweezer Style 3C 


Length: 11 cm (4 .3 in .) 

Tips: 0 .40 x 0 .45 mm 

501977-6 . . . . . . . . . . . . . US$ 49 

501977 . . . . . . . . . . . . . . . US$ 12 



Length: 11 cm (4 .3 in .) 

Tips: 0 .40 x 0 .45 mm 

501978-6 . . . . . . . . . . . . . US$ 49 

501978 . . . . . . . . . . . . . . . US$ 12 



Length: 11 cm (4 .3 in .) 

Tips: 0 .40 x 0 .45 mm 

501979-6 . . . . . . . . . . . . . US$ 49 

501979 . . . . . . . . . . . . . . . US$ 12 



Length: 11 cm (4 .3 in .) 

Tips: 0 .40 x 0 .50 mm 

501980-6 . . . . . . . . . . . . . US$ 49 

501980 . . . . . . . . . . . . . . . US$ 12 



Length: 11 cm (4 .3 in .) 

Tips: 0 .40 x 0 .50 mm 

501981-6 . . . . . . . . . . . . . US$ 49 

501981 . . . . . . . . . . . . . . . US$ 12 

All tweezers on this page are sold in packages of 6 



1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1

Ceramic-tipped Forceps 

Zirconia ceramic forceps have several unique properties that are not present in metal forceps . 

● Ceramic contains no metal, therefore, the forceps will not leave any trace metal residue on tissue . This is especially useful in forensic science 

research . 

● Ceramic is not electrically conductive so it can be used for handling gels in an electrophoresis bath . 

● Ceramic’s corrosion resistance allows its use in highly corrosive solutions . For example, clean quarz cover glass or lithographic produced chip 

sensors in an acid solution without damaging the forceps . 

● Ceramic’s low heat conductivity and high heat resistance allow it to hold parts in a flame for sterilizing or fabricating . Although the flame will 

eventually reduce the strength of the ceramic tip, it will be minimal . 

Dumont #3 

Material: Dumoxel, self-closing 

Length: 12 cm (4 .75 in .) 

Tips: 0 .4 x 0 .3 mm Ceramic 

501208 . . . . . . . . . . . . . . . US$ 68 

Dumont #3C 

Material: Dumoxel 

Length: 11 cm (4 .3 in .) 

Tips: 0 .4 x 0 .3 mm Ceramic 

501209 . . . . . . . . . . . . . . . Tip Profile: 

US$ 65 

Zirconia Ceramic Forceps with 

plastic handles, 14 cm (5 .5 in .) 

long, 9 mm straight tips 

501207 . . . . . . . . . . . . . . US$ 47 

Forceps 

Bishop Harmon forceps, serrated, 

9 cm (3 .5 in .) long 

Standard 501775 . . . . . . . . . . US$ 30 

German 501775-G . . . . . . . . US$ 54 

Bishop Harmon forceps, 1 x 2 teeth 

9 cm (3 .5 in .) long 

Standard 501776 . . . . . . . 

Titanium 

US$ 31 

German 501776-G . . . . . US$ 72 

555053FT . . . US$ 156 

Graefe Forceps, 1 x 2 teeth 

7 cm (2 .75 in .) long, 1x2 teeth, curved 0 .7 mm tips 

Standard 14141 . . . US$ 31 German 14141-G . . US$ 90 

Graefe Forceps, 1 x 2 teeth 

7 cm (2 .75 in .) long, straight 0 .7 mm tips 

Standard 14140 . . . US$ 30 German 14140-G . . US$ 78 

Titanium 

108mm long 

2mm OD rings 

555827L . US$ 288 

Tip Profile: 

Tip Profile: 



1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

115 



Straight Forceps 

Length: 115mm long 

Tips: 1 x 2, 0 .12mm teeth 

Titanium 555047FT . . . . . . . US$ 269 

Straight Forceps 


Titanium 555007FT . . . . . . . US$ 202 

McPherson Forceps 

Length: 11 .5cm (4 .5 in .) 

Tips: 7mm, tying, 45°angle 

Titanium 555009FT . . . . . . . US$ 221 

McPherson Forceps 

Length: 8 .5cm (3 .3 in .) 

Tips: angled, with tying platforms 

Titanium 555005FT . . . . . . . US$ 245 

Forceps 

Length: 8 .5cm long 

Tips: 12mm, straight with tying platforms 

Titanium 555001FT . . . . . . . US$ 216 

Forceps 

Length: 8 .5 cm (3 .3 in .) 

Tips: straight with 0 .12 mm teeth (1x2) 

Titanium 555041FT . . . . . . . US$ 226 

Jewelers #7 Forceps 

Length: 110mm 

Tips: 0 .07 x 0 .01 mm 

Titanium 555230F . . . . . . . . . US$ 67 


Length: 110mm, 45° bend 

Tips: 0 .05 x 0 .01 mm 

Titanium 555229F . . . . . . . . . US$ 67 


Length: 110mm, 45° straight 

Tips: 0 .01 x 0 .06 mm 

Titanium 555227F . . . . . . . . . US$ 67 

Tip Profile: 



Oval-Tipped Forceps 

1mm OD flat oval tips 

108mm long 

Titanium 555828L . . . US$ 144 

Ring-Tipped Forceps 

Forceps, large ring, 4 .8mm ID, 

6 .0mm OD w/screw 

503202 . . . US$ 44 

Ring-Tipped Forceps 

Forceps, small ring, 2 .2mm ID, 

3 .0mm OD w/screw 

503203 . . . . US$ 47 

Iris Forceps, 1 x 2 teeth 

10 cm (4 in .) long, straight, 0 .8 mm tips 

Tip Profile: 

Standard German 

15916 . . . . . . . . . . . . US$ 23 15916-G . . . . . . . . . US$ 36 

Adson Forceps, 1 x 2 teeth 

12 cm (4 .75 in .) long 

Tungsten Carbide jaws 

Standard 500178 . . . . . . . US$ 43 

German 500178-G . . . . US$ 108 

Adson Forceps, 1 x 2 teeth 

Tip Profile: 

12 cm (4 .75 in .) long 

Tip Profile: 

Standard 500092 . . . . . . . US$ 28 

German 500092-G . . . . . US$ 38 

Micro Adson Tissue Forceps, 1 x 2 teeth 

fine point, 12 cm (4 .75 in .) long, 0 .8 mm tips 

Standard 501244 . . . . . . . US$ 34 

German 501244-G . . . . . US$ 50 

Micro Adson Dressing Forceps, serrated 

fine point, 12 cm (4 .75 in .) long 

Standard 501245 . . . . . . . US$ 30 

German 501245-G . . . . . US$ 50 

Adson-Brown Forceps Tip Profile: 

12 cm (4 .75 in .) long, Tungsten Carbide 

jaws with 7x7 side grasping teeth 

Standard 500177 . . . . . . . US$ 46 

German 500177-G . . . . US$ 119 

Tip Profile: 

Tip Profile: 



1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

117 



Graefe Forceps, serrated 

7cm (2 .75 in .) long, straight 0 .7 mm tips 

Standard 14142 . US$ 26 German 14142-G . . . . US$ 61 

7cm long, curved 0 .7 mm tips 

Standard 501215 US$ 28 German 501215-G . . . US$ 43 

Iris Forceps, serrated 

Iris Forceps, serrated 

Tip Profile: 503311 

Tip Profile: 

Tip Profile: 

Tip Profile: 

10 cm (4 in .) long, straight 0 .8 mm tips 


15914 . . . . . . . . . . . . US$ 20 15914-G . . . . . . . . . . . US$ 36 

Tip Profile: 

10 cm (4 in .) long, curved 0 .8 mm tips 


15915 . . . . . . . . . . . . US$ 22 15915-G . . . . . . . . . . . US$ 36 

Tip Profile: 

Iris Forceps, 1 x 2 teeth 

10 cm (4 in .) long, curved 0 .8 mm tips 


15917 . . . . . . . . US$ 24 15917-G . . . . . US$ 38 

Adson Forceps, serrated 

12 cm (4 .75 in .) long, 

Tungsten Carbide jaws 

Standard 500222 . . . . US$ 38 

German 500222-G . US$ 119 

Adson Forceps 

Tips: 10mm with TC insert 

Titanium 555243F . . . . . . . . . US$ 72 

Adson Forceps, serrated 

12 cm (4 .75 in .) long 

Standard 14226 . . . . . . US$ 26 

German 14226-G . . . US$ 35 

503311 . . . US$ 34 

4 x 5 Teeth 

14 .5cm 

503313 . . . US$ 25 

2 x 3 Teeth 

14 .5cm 

Tip Profile: 

503312 . . . US$ 29 

3 x 4 Teeth 

14 .5cm 



1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1

Tissue Forceps 

12 .5 cm (5 in .) long, 1 x 2 teeth 


15918 . . . . . . US$ 20 15918-G . . . . . . US$ 30 

12 .5 cm (5 in .) long, curved, 1 x 2 teeth 

501216 . . . . . US$ 20 501216-G . . . . . US$ 30 

15 cm (6 in .) long, straight, 1 x 2 teeth 

501742-G . . . . . US$ 30 

15 cm (6 in .) long, straight, 2 x 3 teeth 

501741-G . . . . . US$ 30 

Graefe Fixation Forceps 

Length: 11 .5cm (4 .5 in .) 

Tips: 4mm wide, 5x5 teeth 

501988 . . . . . . US$ 34 

Dressing Forceps, serrated 


15 .5 cm (6 in .) long (pictured) 

500363 . . . . . . . . . US$ 22 500363-G . . . US$ 40 

25 .5 cm (10 in .) long 

500364 . . . . . . . . . US$ 22 500364-G . . . US$ 42 

30 .5 cm (12 in .) long 

500365 . . . . . . . . . US$ 22 500365-G . . . US$ 42 

12 .5 cm (5 in .) long 

501217 . . . . . . . . . . US$ 20 501217-G . . . . US$ 41 

Dressing Forceps 

Length: 16 cm (4 in .) 

Titanium 503389 . . . . . . . . . US$ 108 

Micro Tweezer 

German 

15 cm (6 in .), serrated, angled 

501727-G . . . . . . . US$ 54 

Dressing Forceps, ultra fine, serrated 

12 .5 cm (5 in .), straight, sharp tips 

15908 . . . . . . . . . . . . . . . . . . US$ 30 

12 .5 cm (5 in .), straight, round tips 

503283 . . . . . . . . . . . . . . . . . US$ 25 

Gillies Dissecting Forceps, 1 x 2 teeth 


15 .5 cm (6 in .) long 

501266 . . . . . US$ 32 501266-G . . . . . . US$ 64 

15 .5 cm (6 in .) long, Tungsten Carbide jaws 

501265 . . . . . US$ 43 501265-G . . . . . . . US$ 78 

Tip Profile: 

Tip Profile: 



1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

119 



McIndoe Dressing Forceps, serrated 


15 .5 cm (6 in .) long 

501268 . . . . US$ 28 501268-G . . . . US$ 64 

15 .5 cm (6 in .) long, Tungsten Carbide jaws 

501267 . . . . US$ 52 501267-G . . . . US$ 64 

Teflon-Coated Cupped Forceps 

Length: 15 .25 cm (6 in .) 

Tips: 3 .5mm diameter 

501983 . . . . . . US$ 90 

Plastic-Coated Cupped Forceps 

501984 Length: 12 .5 cm (5 in .) Tips: 3 .5mm diameter . . . . . . . . . . US$ 54 

Teflon-Coated Tweezers 

Length: 110mm 

Tips: Narrow tips, 0 .25 x 0 .098mm 

503361 . . . . . . US$ 30 

Russian Forceps 

Length: 15 .25cm (6 in .) 

Tips: serrated, oval, 7mm diameter 

501987 . . . . . . US$ 40 

DeBakey Forceps 

15 cm (6 in .) long, 

delicate, jaw width 1 .5 mm 


501239 . . . . . US$ 72 501239-G . . . . . US$ 119 

Rubber-tipped Forceps 

Length: 21cm (8 .25 in .) 

Excellent for small animal handling . 

503370 . . . . . . US$ 34 

Sterile Thumb Forceps 

10 .5 cm 

Single use only . 

503380 Pack of 10 . . . . . . US$ 24 

503381 Pack of 100 . . . . US$ 138 

Special cupped forceps allow atraumatic 

gripping of organs and other delicate tissue. 

Atraumatic teeth grip tissue, 

vessels, and organs without 

damage . 

45 degree angled tip 

501996 . . . US$ 72 



1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1

Round-handled Forceps 

By hollowing out the handles of long, round-handled instruments, the overall weight is decreased . This makes them efficient and non-fatiguing 

when operating under a microscope . Made from high quality stainless steel, these instruments are an excellent addition to a microsurgical 

instrument kit . 

Round, Hollow Handle Forceps 


Tips: 0 .15 mm tips 

bent at 45° 

14209 . . . . . . US$ 119 

Tip Profile: 



Tips: straight 0 .15 mm 

Standard 14113 . . . . . . . US$ 96 

German 14113-G . . . . US$ 150 



Tips: curved 0 .3 mm tips 

Standard 14114 . . . . . . . . US$ 94 

German 14114-G . . . . . US$ 162 

Dilator Forceps 

Length: 14 cm (5 .5 in .) 

Tips: straight 0 .15 mm tips 

15910 . . . . . . . . 

Tip Profile: 

US$ 88 


Length: 14 cm (5 .5 in .) 


14211 . . . . . . . US$ 107 


Length: 14 cm (5 .5 in .) 

Tips: straight 0 .15 mm tips 

with tying platform 

14079 . . . . . . . . US$ 86 


Length: 14 cm (5 .5 in .) 


14210 . . . . . . . US$ 107 

DeBakey Forceps 

16 cm (6 .25 in .) long, angled, micro, 

jaw width 1 .2 mm, atraumatic 

503213 . . . . . US$ 162 

Tip Profile: 

Tip Profile: 



1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

16 cm (6 .25 in .) long, micro, 

jaw width 1 .2 mm, straight, atraumatic 

503212 . . . . . US$ 161 

121 



Microintraocular forceps 

Length: 14 cm (5 .5 in .) 

Jaws: 2 .5 x 0 .3 x 0 .25mm (lxwxt), 1 .5mm maximum opening 

500373 . . . . . US$ 192 

500373-T . . US$ 360 titanium handle 

Length: 14 cm (5 .5 in .) 

Jaws: 3 x 0 .6 x 0 .4mm (lxwxt), 1 .4mm maximum opening 

501212 . . . . . . US$ 192 

501212-T . . . US$ 360 titanium handle 

Vessel Cannulation Forceps for 0 .5mm diameter cannula, 10 cm (4 in .) long 

500377 . . . . . . US$ 83 

Tip Profile: 

Vessel Cannulation forceps for 1 .0 mm diameter cannula, 10 cm (4 in .) long 

500453 . . . . . . US$ 83 

Filter Forceps 

Great for gel handling 

Polypropylene finger grip, 11 cm (4 .3 in .) long, 

straight flat jaw 

500455 . . . . . . US$ 25 


11 cm (4 .3 in .) long, straight flat jaw 


500456 . . . . . . US$ 29 500456-G . . . US$ 41 

Micro Cannula 

l 0.4mm O.D., 0.2mm I.D. tubing 

l Autoclavable 

l Biocompatible Perfluorocarbon 

tubing material 

KZ1101 Micro Cannula, 3" US$ 96 

Horticultural Forceps 

12 .5 cm (5 in .) long 

Wide, angled tips are only 0 .4mm thick . 

These forceps were designed for extracting 

seedling plugs from horticulture trays without 

damaging the fragile root system . 

503411 Horticultural Forceps US$ 30 


This micro cannula is ideal for placement in the 

carotid or femoral artery of mice, rats, and other 

small animal blood vessels . It can be used with a 

pressure transducer (WPI’S BLPR2) for blood pressure 

measurement, or in conjunction with a micro-syringe 

injection system (like WPI’s UMP3 or MMP pumps) . 

The incorporated standard female luer fitting makes 

connecting to existing experimental plumbing quick 

Tip Profile: 



1:1 

1:1 

1:1 

1:1 

and easy . The cannula is provided with a contouredtip 

stainless steel stylet (trocar) to facilitate placement 

using established techniques . A movable “shoulder” 

ring provides a tie-in point to prevent accidental 

removal . The cannula may be left in place for 2 hours 

or more, and with proper care and cleaning, may be 

re-used multiple times . Instructions for use included . 

1:1

Delrin Plastic Tweezers 

11 .8 cm (4 .6 in .) long 

503362 . . . . . . . US$ 4 


11 cm (4 .3 in .) long, bent flat jaw 

500457 . . . . . . US$ 28 

1:1 


Wafer Handling Forceps 

11 cm (4 .3 in .) long, angled 30° jaw 

501303 . . . . . . US$ 47 


1:1 

Micro Hemostatic Forceps 


12 .5 cm (5 in .) long, straight, serrated, 0 .4 x 0 .8 mm tips 

500451 . . US$ 44 500451-G . . . . . . . US$ 56 

12 .5 cm (5 in .) long, curved, serrated, 0 .4 x 0 .8 mm tips 

500452 . US$ 42 500452-G . . . . . . . US$ 54 

Tip Profile: 

Tip Profile: 

Titanium 

Titanium 

Tip Profile: 

Tip Profile: 

Backhaus Towel Clamp 


3.5” 501320 . . . . US$ 19 501320-G . . . . . . US$ 36 

5.25” 501700 . . . . US$ 20 501700-G . . . . . . US$ 38 

Hartman Mosquito Hemostatic Forceps 


15920 12 .5 cm (5 in .) long, straight . . . . . US$ 20 15920-G . . . . . . . US$ 40 

15921 12 .5 cm (5 in .) long, curved . . . . . US$ 22 15921-G . . . . . . . US$ 40 

501705 9 cm (3 .5 in .) long, straight . . . . . . US$ 20 501705-G . . . . . . US$ 40 

501291 9 cm (3 .5 in .) long, curved . . . . . . US$ 22 501291-G . . . . . . US$ 40 

555222F 9 cm (3 .5 in .) long, straight . . . . . US$ 240 

555223F 9 cm (3 .5 in .) long, curved . . . . . US$ 240 



1:1 

1:1 

1:1 

123 



Allis Tissue Forceps 

6”, 4x5 teeth 

Standard 501324 . . . . . . . US$ 38 

German 501324-G . . . . . US$ 77 

Kelly Hemostatic Forceps 

1:1 

Tip Profile: 

Tip Profile: 

Tip Profile: 


501241 Straight, 14 cm (5 .5 in .) long . . . . US$ 20 501241-G . . . . . . . US$ 42 

501288 Curved, 14 cm (5 .5 in .) long . . . . . US$ 20 501288-G . . . . . . . US$ 42 

501714 Straight, 15 .5 cm (6 in .) long . . . . US$ 24 501714-G . . . . . . . US$ 42 

501715 Curved, 15 .5 cm (6 in .) long . . . . . US$ 24 501715-G . . . . . . . US$ 42 

Rochester-Oschner Hemostatic Forceps 


Tip Profile: Tip Profile: 

Tip Profile: 

Tip Profile: 

Crile Hemostatic Forceps 

501709 Straight, 14 cm (5 .5 in .) long . . . . . . US$ 25 501709-G . . . . . . . . . US$ 40 

501710 Curved, 14 cm (5 .5 in .) long . . . . . . . US$ 25 501710-G . . . . . . . . . . US$ 40 

501326 Straight, 16 cm (6 .25 in .) long . . . . . US$ 26 501326-G . . . . . . . . . US$ 42 

501711 Curved, 16 cm (6 .25 in .) long . . . . . . US$ 26 501711-G . . . . . . . . . . US$ 42 


501242 Straight, 14 cm (5 .5 in .) long . . . . US$ 20 501242-G . . . . . . . US$ 42 

501730 Curved, 14 cm (5 .5 in .) long . . . . US$ 20 501730-G . . . . . . . US$ 42 

501712 Straight, 15 .5 cm (6 in .) long . . . . US$ 24 501712-G . . . . . . . US$ 42 

501713 Curved, 15 .5 cm (6 in .) long . . . . US$ 24 501713-G . . . . . . . US$ 42 



1:1 

1:1 

1:1

1:1 

Tip Profile: 

Micro Alligator Forceps 


Tip Profile: 

Tip Profile: 

Tip Profile: 

Rochester-Pean Hemostatic Forceps 


501325 Straight, 16 cm (6 .25 in .) long . . . . . US$ 24 501325-G . . . . . . . US$ 42 

501706 Curved, 16 cm (6 .25 in .) long . . . . . US$ 24 501706-G . . . . . . . US$ 42 

501707 Straight, 19 cm (7 .5 in .) long . . . . . . US$ 26 501707-G . . . . . . . US$ 43 

501708 Curved, 19 cm (7 .5 in .) long . . . . . . . US$ 26 501708-G . . . . . . . US$ 43 

Mixter Hemostatic Forceps 

“Baby”, right angle, 14 cm (5 .5 in .) long 

Standard 501240 . . . . . . US$ 38 

German 501240-G . . . . US$ 72 

8 cm (3 in .) shaft, 0 .5 x 4 .5 mm serrated jaw 

500446 . . . . . . . US$ 252 500446-G . . . . . . . US$ 186 

Micro Crocodile Forceps 

7 .5 cm (3 in .) shaft, 3 mm serrated jaw 

501211 . . . . . . . . . US$ 85 

Tip Profile: 

8 cm 

Tip Profile: 

Rochester-Carmalt Hemostatic Forceps 


501243 Curved, 16 cm (6 .25 in .) long . . . US$ 26 501243-G . . . . . . . . US$ 48 

501287 Straight, 16 cm (6 .25 in .) long . . US$ 26 501287-G . . . . . . . . US$ 48 

501716 Curved, 20 cm (7 .75 in .) long . . US$ 32 501716-G . . . . . . . . US$ 56 

501717 Straight, 20 cm (7 .75 in .) long . . US$ 32 501717-G . . . . . . . . . US$ 56 



1:1 

1:1 

125 



Spring Scissors 

Vannas Scissors, Super Fine 

Length: 8 cm 

Blades: straight 3 mm 501778 . . . US$ 215 

Tips: 0.015 x 0.015 mm 

Length: 8 cm 

Blades: curved 3 mm 501839. . US$ 239 

Tips: 0.015 x 0.015 mm 

Vannas Scissors 

Length: 8.5 cm (3.3 in.) 

Blades: straight 7mm 500086 . . . . . . . . . US$ 203 

Tips: 0.025 x 0.015 mm 


Blades: curved 7mm 501232 . . . . . . . . . . . US$ 210 

Tips: 0.025 x 0.015 mm 


Length: 8 cm (3 in.) 

Blades: straight 5 mm 

Tips: 0.1 mm tips 


14003 . . . . . . US$ 150 14003-G . . . . . US$ 234 



Blades: curved, 5 mm 



14122 . . . . . . US$ 155 14122-G. . . . . . . US$ 239 

Student Vannas Scissors 

Length: 9 cm 

Blades: 8 mm long 

Tips: 500 microns 

Straight 501777. . . . . . . US$ 83 

Curved 501930 . . . . . . US$ 83 

Vannas Scissors, angled on flat 


Blades: angled, 5 mm 


501790 . . . . . US$ 155 



Blades: 45° angled to side, 5 mm 



500260 . . . . . US$ 167 500260-G . . . . US$ 238 

14177 . . . . . . . US$ McPherson-Vannas Scissors 

Length: 7 cm (2.75 in.) 

164 


Tips: 0.1mm 


Blades: curved 3 mm 

Tips: 0.1mm 

501233 . . . . . US$ 172 

Tip Profile: 

Tip Profile: 

These squeeze-handle micro scissors can be used ambidextrously. 

Tip Profile: 

Tip Profile: 

Tip Profile: 

Tip Profile: 

Tip Profile: 

Finest Tips in the World! 



1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1

Micro Scissors —Diamond Coated Blades 

The special diamond coated blades will increase the longevity of the cutting 

edge and improve the quality of the cut. Used to reduce wear on razor blades 

and industrial metal cutting tools, this coating is now being used in biomedical 

applications. Some studies have shown that even after double the normal usage 

of the cutting implement, no blade wear was detected. 


Micro Scissors 


Blades: straight, 8 mm 

Tips: sharp, coated 

503365 . . . . US$ 360 

Micro Scissors 



Tips: sharp, coated 

503364 . . . . US$ 360 



3 mm cutting edge 

503371 . . . . . US$ 158 

McPherson-Vannas Scissors 



Blades: straight 5 mm 14124. . . . . . . 

Tips: 0.1mm 

US$ 150 14124-G . . . US$ 186 



Tips: 0.1mm 

These scissors have slightly rounded tips for blunt dissection. 



Blades: sraight, 3 mm 

Tips: 0.22 mm rounded tips 

503215 . . . . . US$ 124 





503217. . . . . . US$ 124 



Blades: angled on flat, 5 mm 


503216 . . . . . US$ 124 



Blades: 45 angled to side, 5 mm 


503214 . . . . . US$ 124 




3 mm cutting edge 

503372 . . . . . US$ 158 

501234 . . . . . US$ 155 501234-G. . US$ 239 

Tip Profile: 

Tip Profile: 

Tip Profile: 

Tip Profile: 

Tip Profile: 

l Hardness of coated surface resists wear and 

increases life of cutting edge 

l Anti-reflective coating resists glare and assists 

in better view of surgical field 

l Coating is corrosion resistant 

l Reduced friction at cutting site decreases 

necrosis of surrounding tissue and bone 


World Precision Instruments • Tel: 941-371-1003 • Fax: 941-377-5428 • E-mail: sales@wpiinc.com • Internet: www.wpiinc.com 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

127 






Standard 15905 . . . . . . . US$ 66 

German 15905-G. . . . US$ 144 



Standard 15906. . . . . . . US$ 66 

German 15906-G . . . US$ 144 

Spring Scissors, SuperCut 

one edge micro serrated, one edge honed to 

the sharpness of a knife edge 


Blades: straight 9mm 

501924 . . . . US$ 227 


Blades: curved 9mm 

501925 . . . . US$ 227 


Length: 10.5 cm (4 in.) 


Length: 10.5 cm (4 in.) 




Blades: straight 12 mm extra fine and long 

Standard 14125. . . . . . . . US$ 162 

German 14125-G . . . . . US$ 264 


Blades: curved 12 mm extra fine and long 

14126. . . . . . . . US$ 162 

Noyes Scissors, sharp/sharp tips 

Tip Profile: 

Tip Profile: 


Tip Profile: 


500228 12 cm long, straight 15 mm blades . . . US$ 54 500228-G . . . . US$ 119 

501236 12 cm long, curved 15 mm blades . . . US$ 54 501236-G . . . . US$ 166 

501237 14 cm long, straight 20 mm blades . . . US$ 54 

501238 14 cm long, curved 20 mm blades. . . . US$ 54 

503305 12 cm long, straight, sharp/blunt . . . . . US$ 52 

503306 12 cm long, straight, blunt/blunt . . . . . US$ 52 

Spring Scissors, round handles 


Blades: straight 6.5 mm 

Standard 14111 . . . . . . US$ 101 

German 14111-G . . . . US$ 150 

501235 . . . . . US$ 107 

14127 . . . . . . . US$ 113 14127-G . . . US$ 143 



1:1 

1:1 

1:1 

1:1 

1:1 

1:1

Titanium Instruments 

l 100% non-corrosive (great for seawater procedures) l Forcep tips coated with tungsten carbide for increased gripping power 

l 100% non-magnetic (MRI compatible) l Anodized, non-glare blue finish 

l 40% lighter than stainless steel (reduces hand fatigue) 

Castroviejo Straight Scissors 


Tips: 11mm 

Titanium 555530S . . . . . US$ 288 

Castroviejo Curved Scissors 


Tips: 11mm, blunt 

Titanium 555526S . . . . . US$ 283 



Tips: 16mm, blunt 

Titanium 555525S . . . . . US$ 283 



Tips: small 

Titanium 555524S . . . . . US$ 307 



Tips: strong curve 

Titanium 555523S . . . . . US$ 307 



Tips: straight, 3mm 

Titanium 14364 . . . . . . . US$ 240 



Tips: straight, sharp, 10.5mm 

Titanium 555580S . . . . . US$ 283 



129 



Mcpherson-Westcott Stitch Scissors 


Tips: 10.5 long 

Titanium 555540S . . . . . US$ 254 

Westcott Stitch Scissors 


Tips: 19, curved 

Titanium 555541S . . . . . US$ 254 

Westcott Curved Scissors 


Tips: blunt, 19mm, curved 

Titanium 555621S . . . . . US$ 288 

Westcott Curved Scissors 


Tips: blunt, 21mm, curved 

Titanium 555620S . . . . . US$ 254 



Tips: sharp, 9.5 angled to side 

Titanium 555647S . . . . . US$ 264 



Tips: sharp tips angled, 9.5mm 

Titanium 555641S . . . . . US$ 240 



Tips: sharp tips straight, 9.5mm 

Titanium 555640S . . . . . US$ 240 



Tips: extra thin 13 mm straight blades, sharp 

Titanium 555600S . . . . . US$ 307 





Tips: angled sharp, 10.5mm 

Titanium 555584S . . . . . US$ 283 



Tips: curved, sharp, 12.5mm 

Titanium 555583S . . . . . US$ 307 

Mcpherson-Westcott Scissors 


Tips: curved, blunt 

Titanium 555500S . . . . . US$ 221 

Iris Scissors 


Tips: Sharp, 11mm curved 

Titanium 555562S . . . . . US$ 245 

Iris Scissors 


Tips: Sharp, 11mm curved 

Titanium 555561S . . . . . US$ 226 

Iris Scissors 


Tips: Sharp, 11mm straight 

Titanium 555560S . . . . . US$ 221 

Spring Scissors, round handles 



Standard 14112 . . . . . . US$ 101 

German 14112-G . . . . US$ 174 

Spring Scissors, sharp/sharp tips 



503308 . . . . . US$ 119 

Tip Profile: 1:1 



1:1 

131 



Spring Scissors, blunt/blunt tips 



503309 . . . . . US$ 119 

Spring Scissors, sharp/ball tips 



503310 . . . . . US$ 119 

Ring Scissors 

Goldman-Fox Scissors 

Curved, serrated tips — 13 cm long 

503256 . . . . . . . . . . . . US$ 66 

MiniDissecting, Left Hand 

9 cm long, curved 

503626 . . . . . . . . . . . . US$ 43 

9 cm long, straight 

503625 . . . . . . . . . . . . US$ 42 

LEFTIES! 

Kilner Scissors 

Flat tips, 14 cm long 

503307 . . . . . . . . . . . . US$ 34 



1:1 

1:1 

1:1 

MiniDissecting, Left Hand 

9 cm long, curved, fine tips 

503627 . . . . . . . . . . . . US$ 43 

9 cm long, straight, fine tips 

503628 . . . . . . . . . . . . US$ 42 

1:1

Scissors, Mini Dissecting 

sharp medium tips, #4 - 9.5cm long 

503243 . . . . . . US$ 29 

Scissors, La Grange - S-shaped, S/S - 11 cm long, 

503246 . . . . . . . US$ 66 

Potts-Smith Scissors 

Angled 45 degrees, 18cm long 

503250 . . . . . . . . . . . . US$ 59 



503251 . . . . . . . . . . . . . US$ 59 

Dissecting Miniature Scissors 

Round tips, square handle #5 

503244 . . . . . . . . . . . . US$ 31 

Wilmer Iris Scissors - Angled on flat, 10.5 cm 

503248 . . . . . . . US$ 59 

Mini Dissecting Scissors 

Sharp Tips, - 9.5 cm long, 

503245 . . . . . . . US$ 43 

Dissecting Miniature Scissors 

9.5 cm long, sharp fine tips, square handle #3 

503242 . . . . . . . . . . . . US$ 31 



503249 . . . . . . . . . . . . US$ 59 

Plastic Surgery Scissors 

Stainless Steel, 11cm long 

503247 . . . . . . . . . . . US$ 47 



133 



Dissecting Scissors 

1:1 

2.2 cm 

2.3 cm 

Tip Profile: 

Tip Profile: 

Tip Profile: 

Tip Profile: 

Tip Profile: 

Tip Profile: 



2.2 cm 


14393 10 cm (4 in.) straight. . . . US$ 22 14393-G . . . . . . US$ 42 

14394 10 cm (4 in.) curved . . . . US$ 22 14394-G . . . . . . US$ 43 

15922 12.5 cm (5 in.) straight . . US$ 22 15922-G . . . . . . US$ 36 

15923 12.5 cm (5 in.) curved. . . US$ 22 15923-G . . . . . . US$ 36 

Iris Scissors 


Blades: straight 


501758 . . . . . . US$ 26 501758-G . . . . . . . . US$ 47 


Blades: curved 

501759 . . . . . . US$ 26 501759-G . . . . . . . . US$ 47 

Iris Scissors 


Tips: straight pointed, 32mm 

Titanium 555646S . . . . . US$ 230 

Iris Scissors 

Length: 11.5 cm (4.5 in.) 

Blades: straight, Tungsten Carbide 


500216 . . . . . . US$ 53 500216-G . . . . . . US$ 107 

Length: 11.5 cm (4.5 in.) 

Blades: curved, Tungsten Carbide 

500217. . . . . . . US$ 53 500217-G . . . . . . US$ 107 


sharp fine tips 

503241 . . . . . . . . . . . . US$ 31 


Regular tips, curved 

503240 . . . . . . . . . . . . US$ 31 

1:1 

1:1 

1:1 

1:1

Iris Scissors, SuperCut 

one edge micro serrated, one edge honed to the sharpness of a knife edge 

10 cm (4 in.) 


Straight 14218. . . . 

2.3 cm 

Tip Profile: 

US$ 54 14218-G . . . US$ 80 

Curved 14219. . . . US$ 55 14219-G . . . US$ 82 

11.5 cm (4.5 in.) 

Straight 503259 . . US$ 59 

Curved 503260 . . US$ 65 

Iris Scissors, SuperCut 

one edge micro serrated, one edge honed to the sharpness of a knife edge 

12.5 cm (5 in.) 


Straight 14225 . . . 

3 cm 

US$ 55 14225-G . . . . . US$ 78 

Curved 14224 . . . US$ 58 14224-G . . . . . US$ 80 

14 cm (5.5 in.) 

Straight 503261 ...... US$ 71 

Curved 503262 ...... US$ 77 

Iris Scissors, SuperCut Tungsten Carbide 

These are the finest scissors available. They combine the precise cutting action of the razor-sharp 

SuperCut blades with the durability of Tungsten Carbide. They will provide a clean, smooth cut 

and retain their sharpness for an extended period of time. 

11 cm (4.3 in.) long 

Straight 

Standard 501263 . . . . . . . 

2.5 cm 

Tip Profile: 

US$ German 

102 

501263-G . . . . . US$ Curved 

166 

Standard 501264 . . . . . . . US$ 102 

501264-G . . . . . US$ 205 

Ribbon Handle Iris Scissors 

Larger ring handles for ease of use 

11 cm (4.3 in.) long 

Straight 501767 . . . US$ 49 

Curved 501768 . . . US$ 50 

2.5 cm 

Tenotomy Scissors, SuperCut 

One edge micro serrated, one edge honed to the sharpness of a knife edge 


10 cm (4 in.) Straight 14395 . . US$ 55 14395-G . . . US$ 78 

Curved 14396 . . US$ 56 14396-G . . . US$ 78 

11.5 cm (4.5 in.) Straight 503263 . US$ 59 

Curved 503264 . US$ 65 

Tip Profile: 

Shown: 10 cm, straight 

Shown: 12.5 cm, straight 

1:1 

1 cm Shown: 10 cm, straight 



1:1 

1:1 

1:1 

1:1 

135 



Tenotomy Scissors 


12.5 cm (5 in.), Straight 14220 . . US$ 56 14220-G . . . . US$ 78 

Curved 14221 . . US$ 56 14221-G . . . . US$ 78 

14 cm (5.5 in.) Straight 503265 . . US$ 71 

Curved 503266 . . US$ 77 

16 cm (6.2 in.) Straight 503267 . US$ 82 

Metzenbaum Scissors 

Curved 503268 . US$ 88 

Metzenbaum Scissors, Carbide Blades 

3.5 cm 

1 cm 

3.5 cm 


11.5 cm (4.5 in.) Straight 501739 . . . US$ 66 501739-G . . . US$ 119 

Curved 501740 . . . US$ 66 501740-G . . . US$ 119 

14.5 cm (5.75 in.) Straight 501733 . . . US$ 66 501733-G . . . US$ 119 

Curved 501734 . . . US$ 68 501734-G . . . US$ 119 

18 cm (7 in.) Straight 501744 . . . US$ 70 501744-G . . . US$ 119 

Curved 501745 . . . US$ 70 501745-G . . . US$ 119 

Metzenbaum Scissors, SuperCut 


11.5 cm (4.5 in.), Straight 503269 . . . US$ 59 

Curved 503270 . . . US$ 65 

12.5 cm (5 in.) Straight 14214. . . . . US$ 56 14214-G. . . US$ 80 

Curved 14215. . . . . US$ 56 14215-G. . . US$ 82 

16 cm (6.2 in.) Straight 503271 . . . US$ 82 

Curved 503272 . . . US$ 88 

20 cm (7.75 in.) Straight 503273 . . . US$ 94 

Curved 503274 . . US$ 100 

25 cm (9.75 in.) Straight 503275 . . US$ 106 

Curved 503276 ...... US$ 126 


11.5 cm (4.5 in.) Straight 501747 . . . US$ 22 501747-G . . . . US$ 38 

Curved 501748 . . . US$ 22 501748-G . . . . US$ 38 

14.5 cm (5.75 in.) Straight 501252 . . . US$ 22 501252-G . . . . US$ 38 

Curved 501253 . . . US$ 22 501253-G . . . . US$ 38 

17.5 cm (7 in.) Straight 501254 ..... US$ 22 501254-G . . . . US$ 42 

Mayo Harrington Scissors 

Titanium 

Length: 14.5 cm (5.75 in.) 

Tips: straight, 32 mm 

555659S . . . . US$ 120 

Curved 501255 . . . US$ 22 501255-G . . . . US$ 42 

3 cm 

Tip Profile: 

Tip Profile: 


Carbide is a harder metal than stainless steel and 

will retain its sharpness longer 


Also in Titanium 

14cm long (5.5 in.), curved tip 503383 . . . . . . US$ 175 

14cm long (5.5 in.), straight tip 503382 . . . . . . US$ 165 

One edge micro serrated, one edge honed 

to the sharpness of a knife edge 



1:1 

1:1 

1:1 

1:1

Metzenbaum Scissors, SuperCut Tungsten Carbide 


SuperCut blades with the durability of Tungsten Carbide. They will provide a clean, smooth cut and 

retain their sharpness for an extended period of time. 

Mayo Scissors, Tungsten Carbide Blades 

Carbide is a harder metal than stainless 

steel and will retain its sharpness longer 

4 cm 


15cm long Curved 501261 . . . . US$ 102 501261-G . . . . . US$ 206 

15cm long Straight 503359-G . . . . . US$ 206 

18cm long Curved 501262 . . . . US$ 102 501262-G . . . . . US$ 208 

Mayo Scissors 

Standard 

14 cm (5.5 in.) 

German 

Straight 501749 . . . . . . US$ 22 501749-G . . . . . US$ 38 

Curved 501750 . . . . . . US$ 22 501750-G . . . . . US$ 38 

4.5 cm 

17 cm (6.75 in.) 

Straight 501751 . . . . . US$ 22 501751-G. . . . . . US$ 41 

Curved 501752 . . . . . . US$ 23 501752-G . . . . . US$ 41 

4 cm 

4.2 cm 

Tip Profile: 

Standard 

14 cm (5.5 in.) 

German 

Straight 500218 . . . . . . US$ 70 500218-G . . . . . . . . US$ 101 

Curved 500219 . . . . . . US$ 74 500219-G . . . . . . . . US$ 101 

17.5 cm (7 in.) 

Straight 500220. . . . . . US$ 74 500220-G. . . . . . . . US$ 101 

Curved 500221. . . . . . US$ 74 500221-G . . . . . . . . US$ 104 

Mayo Scissors, SuperCut 

One edge micro serrated, one edge honed to the sharpness of a knife edge 


14 cm (5.5 in.) Straight 14216 . . . US$ 54 14216-G . . . . US$ 86 

Curved 14217. . . . US$ 54 14217-G . . . . US$ 86 

16 cm (6.3 in.) Straight 503277 . . . . . . . . US$ 82 

Curved 503278 . . . . . . . . US$ 88 

20 cm (7.8 in.) Straight 503279 . . . . . . . . US$ 94 

Curved 503280. . . . . . . US$ 100 

25 cm (9.8 in.) Straight 503281 . . . . . . . US$ 106 

Curved 503282. . . . . . . US$ 126 

Tip Profile: 

Tip Profile: 

Also in Titanium 

17 cm long (6.75 in.) supercut, straight tip 503384 . . . . . US$ 214 

17 cm long (6.75 in.) supercut, curved tip 503385 . . . . US$ 202 



1:1 

1:1 

1:1 

1:1 

137 



Operating Scissors 

11.5 cm (4.5 in.) Straight 


501753 Sharp/Blunt . . . . . . . . . . . US$ 20 501753-G . . . . . US$ 40 

501754 Sharp/Sharp . . . . . . . . . . . US$ 20 501754-G . . . . . US$ 40 

501743 Blunt/Blunt . . . . . . . . . . . . US$ 20 501743-G . . . . . US$ 40 

11.5 cm (4.5 in.) Curved 


501756 Sharp/Blunt. . . . . . . . . . . . US$ 20 501756-G . . . . . US$ 40 


14 cm (5.5 in.) Curved 



501222 Blunt/Blunt . . . . . . . . . . . . US$ 22 501222-G . . . . . US$ 14 cm (5.5 in.) Straight 

38 

14192 Sharp/Blunt . . . . . . . . . . . US$ 22 14192-G. . . . . . . US$ 40 

501218 Sharp/Sharp . . . . . . . . . . . US$ 22 501218-G. . . . . . US$ 40 

501219 Blunt/Blunt . . . . . . . . . . . . US$ 22 501219-G. . . . . . US$ 40 

Tip Profiles: 

Sharp/Blunt 

Sharp/Sharp 

Blunt/Blunt 

16 cm (6.25 in.) Straight 




501225 Sharp/Sharp . . . . . . . . . . . US$ 22 501225-G . . . . . US$ 16 cm (6.25 in.) Curved 

38 




18 cm (7 in.) Straight 

15924 Sharp/Sharp . . . . . . . . . . . US$ 23 15924-G . . . . . . US$ 53 


500379 Blunt/Blunt . . . . . . . . . . . . US$ 24 500379-G . . . . . US$ 18 cm (7 in.) Curved 

53 






1:1 

14192 

4 cm 

1:1 

15924 

5 cm

Iris Scissors, SuperCut Angled 

One edge micro serrated, one edge honed 

to the sharpness of a knife edge 

10 cm long 

30° angled to side 

500046 . . . . . . US$ 61 

Angled Scissors 

14 cm long 

30° angled to side 

sharp/sharp tips 

Standard 500047 . . . . . US$ 20 

German 500047-G . . . US$ 56 

1:1 

1:1 

Tip Profile: 

4 cm 

Spencer Stitch Scissors 

2.5 cm 


500380 9 cm (3.5 in.) long . . . . . . . . US$ 26 500380-G . . . . . . US$ 54 

501703 10.75 cm (4.25 in.) long . . . US$ 30 501703-G . . . . . . . US$ 58 

501704 13.25 cm (5.5 in.) long . . . . US$ 34 501704-G . . . . . . . US$ 58 

Lister Bandage Scissors 


500444 15 cm (6 in.) long, 4cm long blades . . US$ 26 500444-G . . . . . . . . . . . US$ 50 

501701 8.75 cm (3.5 in.) long. . . . . . . . . . . . . . US$ 19 501701-G . . . . . . . . . . . . . US$ 42 

501702 10.75 cm (4.25 in.) long . . . . . . . . . . . US$ 22 501702-G . . . . . . . . . . . . . US$ 42 

555656S 15 cm (6 in.) long Titanium . . . . . . US$ 144 

Utility Scissor 5.5” 

Standard 501322 . . . . . . . . US$ 18 

German 501322-G . . . . . . US$ 35 

Variety of colored handles available! 



1:1 

1:1 

1:1 

139 



Mayo Scissors, SuperCut Tungsten Carbide 


SuperCut blades with the durability of Tungsten Carbide. They will provide a clean, smooth cut 

and retain their sharpness for an extended period of time. 

5.5 cm 

Straight, 17 cm (6.75 in.) long 

Standard 501259 . . . . . US$ 102 

German 501259-G . . . US$ 210 

Eye Scissors, Blunt, Probe Points, 10 cm (4 in.) 

Straight 

Standard 500366 . . . . . US$ 38 

500366-G . . . US$ 66 

Curved 

German 500367. . . . . . US$ 38 

500367-G . . . US$ 68 

Ceramic Zirconia Scissors 

Developed for applications where metal 

components were used, these scissor blades 

are made of a high tech ceramic second in 

hardness only to diamond. 

The ultra sharp blades cut with precision and 

accuracy and maintain their razor sharp edge 

for an extended time. 

Perfect for use in 

environments where rust 

and corrosion is a problem. 

Safe for light duty 

electrical use. 

Ceramic Scissors 

5.5” long, 2-inch ceramic blades, straight 

501256 . . . . . US$ 58 

Roger Wirecutting Scissors 

12 cm (4.75 in.) long 

notched blade 


501321. . . US$ 28 501321-G . . . . US$ 53 

Curved, 17 cm (6.75 in.) long. . . . . 

Standard 501260 . . . . . US$ 102 

German 501260-G . . . US$ 211 

Tip Profile: 

Tip Profile: 

Tip Profile: 

l Ceramic blades hold their sharp edge up to 100 times longer than 

conventional stainless steel. 

l Non-corrosive 

l No electrical static discharge 

l Non-magnetic 

l Can be used in high temperature environments 

l No metal contamination 



2.5 cm 

Tip Profile: 

1:1 

1:1 

1:1 

1:1

Scissors, Round handled 

14 cm (5.5 in.) 

round Hollow handles 

curved blades 

14208 . . . . . . 

Tip Profile: 

US$ 162 

Scissors, Round handled 

14 cm (5.5 in.) 


straight blades 

14212. . . . . . . US$ 162 

Microintraocular scissors 

14 cm (5.5 in.) 

30° angled blades 

500372 . . . . . US$ 192 

500372-T . . US$ 384 titanium handle 


14 cm (5.5 in.) 


500374 . . . . . 


US$ 192 


14 cm (5.5 in.) 


500376 . . . . . US$ 192 

Barraquer Iris Scissors 

6 cm (2.5 in.) long 

7 mm blades, sharp points 

Standard 14128 . . . . . US$ 107 

German 14128-G . . . US$ 179 

Biemer scissors 

straight, 13 cm (5 in.) 

500381 . . . . . US$ 106 

Tip Profile: 

Tip Profile: 

Tip Profile: 

Cuts vessels perpendicularly and without slipping. 




1:1 

1:1 

1:1 

1:1 

1:1 

141 


Care & Handling of Surgical Instruments 

The proper care and handling of your valuable surgical instruments 

will improve their longevity and function. Choose a protocol 

appropriate for your environment from these cleaning techniques. 

Immediately after use, rinse instruments under 

warm or cool running water to remove all 

blood, body fluids and tissue. Dried soils may 

damage the instrument surface and make 

cleaning very difficult. Do not use hot water as 

this will coagulate proteinous substances. 

CLEANING TECHNIQUES 

Time, temperature, and agitation play important 

roles in the cleaning process. 

Time — the efficiency of cleaning chemicals is 

often time dependant 

Temperature — higher temperature cleaning 

solutions result in better cleaning 

Agitation — whether manual or ultrasonic, it is 

helpful in loosening the soil on the surface of 

the instrument 

A. Ultrasonic Cleaning 

This is the most effective 

cleaning method. Ultrasonic 

cleaning is the result of 

cavitation. The vibrating 

sound waves create micronsize 

bubbles in the solution 

that grow with the alternating 

pressure. When they reach 

a resonant size, the bubbles 

implode creating a force that dislodges dirt and 

particles, even in the smallest of crevices. The 

use of an ultrasonic detergent greatly improves 

the rate of cavitation as opposed to plain water. 

1. Mix enzymatic (Enzol — 

WPI part number 7363), 

or other neutral pH or 

mild alkaline detergent 

(Alconox — WPI part number 

13740) per manufacturer 

recommendations. 

2. Use deionized water, if 

available. 

3. Run ultrasonic cleaner for 

several minutes to degas the 

solution and obtain correct 

temperature. 

4. Place instruments in open position into the 

ultrasonic cleaner. Do not allow instruments 

with sharp blades to touch other instruments. All 

instruments must be fully submerged. 

5. Do not place dissimilar metals (stainless, 

copper, chrome plated, etc.) in the same 

cleaning cycle. 

6. Instruments should be processed in the 

cleaner for 5 to 10 minutes. 

7. Rinse instruments with water to remove 

ultrasonic cleaning solution and any remaining 

soils. 

8. Dry instruments thoroughly with a clean 

towel. This minimizes the risk of corrosion and 

formation of water spots. 

MICRODISSECTION MICROSURGERYRINSING 

9. Use spray lubricant (WPI part number 

500126) in the hinges to improve 

function of instrument. 

B. Automatic Washer Sterilizers 

Follow manufacturer’s 

recommendations. Lubricate 

instruments after last rinse cycle and 

before sterilization cycle. 

C. Manual Cleaning 

1. Use stiff plastic cleaning brushes. 

Do not use steel wool or wire 

brushes. 

2. Use only neutral pH detergents. If not rinsed 

properly, low pH detergents may breakdown 

the stainless protective surface and cause 

black staining. High pH detergents may cause 

surface deposits of brown stains, which can 

interfere with the smooth operation of the 

instrument. 

3. Brush delicate instruments 

carefully and, if possible, handle 

them separately from general 

instruments. 

4. Inspect all instrument surfaces to 

ensure they are visibly clean and 

free of stains and tissue. 

Inspect each instrument for proper 

function and condition. Scissor blades 

should glide smoothly and the blades 

must not be loose when in closed position. 

Check that forceps tips are properly aligned. 

Hemostats and needle holders should not show 

light between the jaws, they should lock and 

unlock easily, and the joints should not be too 

loose. Check needle holder jaws for wear. Examine 

cutting instruments and knives to be sure 

their blades are sharp and undamaged. 

5. Rinse instruments thoroughly under running 

water. While rinsing, open and close scissors, 

hemostats, needle holders and other hinged 

instruments to ensure that hinge areas are also 

rinsed. 

6. Dry instruments thoroughly with a clean 

towel. This minimizes the risk of corrosion and 

formation of water spots. Use spray lubricant 

(WPI part number 500126) in the 

hinges to improve function of 

instrument. 

D. Soaking 

Large, non-delicate instruments 

can be soaked in a corrosion 

inhibiting detergent (Alconox — 

WPI part number 13740) when 

other cleaning methods are not 

practical. Rinsing and drying 

after soaking is recommended. 

STERILIZING 

A. Autoclaving 

1. Lubricate all instruments that have any metalto-metal 

action such as scissors, hemostats, 

needle holders, self retaining retractors, etc. 

Surgical instrument lubricants (WPI part number 

500126) should be used. 

Do not use WD-40 oil or other industrial 

lubricants. 

2. Instruments may be autoclaved individually 

or in sets. 

a. Individual instruments—Disposable paper or 

plastic pouches are ideal. Use a wide enough 

pouch (4" or wider) for instruments with ratchet 

locks (such as needle holders and hemostats) 

so the instrument can be sterilized in anopen 

(unlocked) position. 

b. Instrument Sets—Unlock all instruments and 

sterilize them in an open position. Place heavy 

instruments on bottom of set (when two layers 

are required). 

3. Never lock an instrument during autoclaving. 

This will prevent the steam from reaching 

and sterilizing the metal-to-metal surfaces. 

Furthermore, heat expansion during autoclaving 

can cause cracks in hinge areas. 

4. Do not overload the autoclave chamber, as 

this may also hinder steam penetration. 

5. Place a towel on bottom of pan to absorb 

excess moisture during autoclaving. 

6. At the end of the autoclave cycle (before the 

drying cycle) unlock autoclave door and open it 

no more than a crack (about 3 /4"). Run dry cycle 

for the period recommended by the autoclave 

manufacturer. If the autoclave door is opened 

fully before the drying cycle, cold room air will 

rush into the chamber, causing condensation on 

the instruments. This will result in water stains 

on instruments and also cause wet packs. 

B. Cold Sterilization 

Most cold sterilization solutions require a 10hour 

immersion to render instruments sterile, 

but this prolonged chemical action may be more 

detrimental to surgical instruments than the 

20-minute autoclave cycle. If the instruments 

need only to be disinfected (basically clean), 

cold sterilization is acceptable since disinfection 

will take place in only 10 minutes. 

But to render the instruments sterile (with 

absolutely no living organism surviving), 

autoclaving is recommended. 

For instruments with tungsten carbide inserts 

(needle holders, scissors, tissue forceps), do not 

use solutions containing benzyl ammonium 

chloride which will destroy the tungsten carbide 

inserts. 

STORAGE 

Instruments should be stored in a clean and dry 

environment until use. 



Needle Holders 

Needle Holder 

14 cm (5.5 in.) long 

round handles 

0.4 mm tips, curved smooth jaws 

Standard 14081 . . . . . . . US$ 91 

German 14081-G . . . US$ 210 

Standard 503355 . . . . . US$ 96 with lock 

20 cm (7.75 in) 

Standard 503354 . . . US$ 102 with lock 

Tip Profile: 

Needle Holder 

12.5 cm (5 in.) long 

round handles 

0.4 mm tips 

curved smooth jaws 

14132. . . . . . . . . US$ 102 

Stevens Needle Holder 

13 cm (5 in.) long 

straight 1 mm wide serrated tips 

Standard 14133 . . . . . . . . US$ 89 

German 14133-G . . . . US$ 150 

Castroviejo Needle Holder 

14 cm (5.5 in.) long, with lock 

Straight 1.2-mm wide serrated tips 

Standard 14137 . . . . . . . . . US$ 79 

German 14137-G . . . . . US$ 150 

Titanium 555419NT . . . US$ 163 

Serrated Tungsten Carbide jaws 

Straight with lock 

Standard 500223 . . . . . . US$ 97 

German 500223-G . US$ 180 

Tip Profile: 

Tip Profile: 

Tip Profile: 

Micro Castroviejo Needle Holder 

9cm long, 0.5cm round tips with diamond dust 

Straight 503376 . . . . . . . . US$ 180 

Curved 503377 . . . . . . . . US$ 192 

Tip Profile: 

Smooth tips, 1.2-mm wide 

Straight 503257 . . . . . . . US$ 82 

Curved 503258 . . . . . . . US$ 84 



1:1 

1:1 

1:1 

1:1 

1:1 

1:1 

143 



Needle Holder 

14 cm (5.5 in.) long 

round handles 

0.3 mm tips, straight smooth jaws 

Standard 14080 . . . . . . US$ 97 

German 14080-G . . . US$ 174 

Titanium 

14 cm (5.5 in.) long, straight smooth jaws 

14361. . . . . . US$ 239 

14 cm (5.5 in.) long, curved smooth jaws 

501923 . . . . US$ 239 

Needle Holder 

14 cm (5.5 in.) long 

straight serrated jaws 

Standard 14110 . . . . . US$ 22 

German 14110-G . . . US$ 72 

1:1 

1:1 

Tip 

Profile: 

Tip Profile: 

Tip Profile: 

Tip Profile: 

Needle Holder 

12.5 cm (5 in.) long 

straight serrated jaws 

extra delicate 

Standard 14109 . . . . . US$ 22 

German 14109-G . . . US$ 72 

Needle Holder 

14 cm (5.5 in.) long 

straight serrated Tungsten Carbide jaws 

Standard 15926 . . . . . . US$ 62 

German 15926-G . . . US$ 106 



1:1 

1:1

Derf Needle Holder 


Standard 501246 . . . . . . . . US$ 22 

German 501246-G . . . . . . US$ 47 

1:1 

Crile-Wood Needle Holder 

14.5 cm (5.75 in.) long serrated Tungsten Carbide jaws 

Standard 500224 . . . . . US$ 66 

German 500224-G . US$ 118 

1:1 

Can be used 

ambidextrously! 

Needle Holder, Round handled 

14 cm (5.5 in.) long 


straight smooth jaws 

14207. . . . . . . . . . 

Tip Profile: 

US$ 161 

Needle Holder, Round handled 

14 cm (5.5 in.) long 


urved smooth jaws 

14206 . . . . . . . . . Tip Profile: 

US$ 161 

Tip Profile: 

Tip Profile: 

Tip Profile: 

Tip Profile: 



1:1 

Ryder Needle Holder 


serrated Tungsten Carbide jaws 

Standard 500226 . . . . . US$ 60 

German 500226-G . . US$ 175 

Mathieu Fine Needle Holder 

14 cm (5.5 in.) long 


Standard 500225 . . . . . . US$ 82 

German 500225-G . . US$ 155 

1:1 

1:1 

1:1 

145 



Castro Olsen-Hegar Needle Holder 


combined with Suture Scissors 

serrated jaws 

501998 . . . . . US$ 126 

Micro Olsen-Hegar Needle Holder 

12 cm (4.75 in.) long 


serrated jaws 

jaw length 10 mm 

tip width 2 mm 

501989 . . . . . . US$ 76 

1:1 

Tip Profile: 

Olsen-Hegar Needle holder with Suture Scissors, 


14 cm (5.5 in.) long 

Standard 500227 . . . . . . . . US$ 71 

German 500227-G . . . . US$ 126 

12 cm (4.75 in.) long 

Standard 501312 . . . . . . US$ 112 

16.5 cm (6.5 in.) long 

Standard 501725 . . . . . . US$ 98 

German 501725-G. . . US$ 168 

Tip Profile: 

Tip Profile: 



1:1 

Olsen-Hegar Needle Holder 

14cm (5.5 in.) long 


serrated jaws 

500023 . . . . . . US$ 41 

500023-G . . . . US$ 70

Needles 00 

00 

0 

1 

2 

3 

All needles have a Spring Eye 

which allows the suture to be 

pressed into the eye instead of 

threaded. 

Taper point needles 

pierce and spread 

tissue without cutting it. 

They are ideal for suturing 

delicate, soft tissue when minimal 

trauma is desired. 

Cutting edge needles have sharp 

edges that penetrate easily 

through tough tissue. They 

are ideal for suturing 

skin and dense 

dermal tissue. 

Needle measurements 

taken across needle 

from eye to tip: 

15mm 

00 

0 

1 

2 

3 

Eye Needles, cutting edge, 5/16 circle 

(above left) 

501957 Size 00, 11mm, pack of 12 US$ 24 





Eye Needles, taper point, 5/16 circle 

(above right) 






0 

1 

2 

3 

Surgical Needles, cutting edge, 3/8 circle 

4 

5 

6 

7 

8 











0 

1 

2 

3 

4 

5 

6 

7 

8 

9 

10 

Surgical Needles, cutting edge, 1/2 circle 












0 

1 

2 

3 

4 

5 

6 

7 

8 

9 

10 

Surgical Needles, taper point, 1/2 circle 














00 

0 

Surgical Needles, taper point, 3/8 circle 

1 

2 

3 

4 

5 

6 

7 

8 











147 



Reflex Clip Applier 

11 cm (4.3 in.) long 

for 7 mm clips only 

500343 . . . . US$ 328 

Reflex Clip 7 mm 

for use with #500343 

100/box, Stainless Steel, non-sterile 

500344 . . . . . . US$ 67 

Reflex clip removing forceps 

12 cm (4.75 in.) long, for 7 mm and 9 

mm clips 

500347 . . . . . . . US$ 180 

Applying Forceps for Silver Clips #500087, 18 cm (7 in.) long 

Standard 500088 . . . . . US$ 49 

German 500088-G . . US$ 180 

Silver Clips, Micro Vascular 

0.5 x 0.8 mm (100/pkg) 

500087 . . . . . US$ 29 

Staple Remover 

12 cm (4.5 in.) long, for use with disposable skin stapler 

501830 . . . . . US$ 107 

Reflex Clip Applier 

11 cm (4.3 in.) long 

for 9 mm clips only 

500345 . . . . US$ 328 

Reflex Clip 9 mm 

for use with #500345 

100/box, Stainless Steel, non-sterile 

500346 . . . . . . US$ 67 



Clips and Clamps 

Micro Vessel Clips, serrated jaws 

German 

501779-G straight, 0.75 x 4 mm jaws US$ 71 


501781-G straight, 1 x 8 mm jaws US$ 71 


Side and front view illustrations of straight micro vessel clips 

501783-G slightly curved, 85g pressure, jaws 1mm wide x 6 mm long . US$ 85 

501784-G fully curved, 85g pressure, jaws 1mm wide x 6 mm long . . . . US$ 85 

501785-G 45° angle, 85g pressure, jaws 1mm wide x 6 mm long . . . . . US$ 85 

Micro Vessel Clip Applier with lock 

Applying forceps for Micro Vessel Clips 501783-G, 501784-G, and 

501875-G (above). 

503200 14.5 cm long US$ 180 

Approximator 

20 g pressure, 

for 0.5 to 1.0 mm vessel 

14084 . . . . . . . . . . . US$ 37 

Applying Forceps 

Schwartz Vessel Clips 

German 


501787-G slightly angled, 1.7 x 8 mm jaws US$ 28 

501788-G strong angle, 1.7 x 8 mm jaws US$ 28 

Vessel Clips 

15911 10 g pressure, jaws 0.5mm wide x 0.6mm long, 5 per pack . . . . US$ 64 

14120 30 g pressure, jaws 1mm wide x 5mm long, 5 per pack . . . . . . . US$ 64 

14121 60 g pressure, jaws 1mm wide x 8mm long, 5 per pack . . . . . . . US$ 64 

Applying Forceps for Approximator #14084 & Vessel Clips 

#14120, #15911, and #14121, 10 cm (4 in.) long 

14189 US$ 34 



149 



Bulldog Clamps 

Micro Bulldog Clamp, curved 8 x 1.2 mm 

serrated jaws, 3 cm (1 in.) long 

Standard 14119 . . . . . . . US$ 32 

German 14119-G . . . . US$ 55 

Small Bulldog Clamp, straight serrated jaws, 


Standard 14118 . . . . . . . US$ 26 

German 14118-G . . . . US$ 42 

Johns Hopkins Bulldog Clamp, curved serrated 

jaws, 6.5 cm (2.5 in.) long 

Standard 14117 . . . . . . . US$ 26 

German 14117-G . . . . . US$ 47 

Johns Hopkins Bulldog Clamp, 6.5 cm 

(2.5 in.) long, straight serrated jaws 

Standard 14116 . . . . . . . US$ 26 

German 14116-G . . . . . US$ 47 

Frog Heart Clips 

501902 ... US$ 59 

two flat loops 

2.5 mm diameter loops 

24 mm long 

5 per package 

501903 ... US$ 38 

two fine loops 

0.6 mm diameter tips 

17 mm long 

5 per package 

501904 ... US$ 59 

two flat tips 

1 x 3 mm tips 

18 mm long 

5 per package 

Glover Bulldog Clamps 

503236 Glover Bulldog Clamp - straight, smooth tips - 8 cm 

long with tension adjustment US$ 56 

503238 Glover Bulldog Clamp - straight, smooth tips - 7 cm 


503237 Glover Bulldog Clamp - curved, smooth tips - 8 cm 


503239 Glover Bulldog Clamp - curved, smooth tips - 7 cm 




Retractors 

Wire Retractors 


5 x 5 mm wire blades 

5 mm depth 

maximum spread 15 mm 

501993 . . . . . . US$ 29 

1:1 




7 mm depth 


501994 . . . . . . US$ 29 



10 x 5 mm blades 

5 mm depth 


Standard 14130. . . . . . US$ 17 

German 14130-G . . . US$ 25 

Picture is smaller than actual size 

Wire Retractors - non-magnetic 

4.5 cm (1.8in.) long 

0.8 x 1.5 mm wire blades 


503210 . . . . . . US$ 29 

1:1 

KD Mouse/Rat Eye Speculum 

US$ 503363 Extra Small, 1cm long, 2mm blades, 1.75mm wide 30 

US$ 501897 Small, 2.1cm long, 2.2mm blades, 5mm max. spread 28 

501898 Medium, 2.1cm long, 3.2mm blades, 6mm max. spread US$ 28 

US$ 501899 Large, 2.1cm long, 4mm blades, 1cm max. spread 28 

extra small small medium large 


5 cm (2 in.) long, 


7 mm depth 


Standard 500368 . . . . . . . US$ 28 

German 500368-G . . . . . US$ 55 

Barraquer Retractor 

4 cm (1.5 in.) long, 


7 mm depth 

maximum spread 3 cm 

Standard 500369 . . . US$ 28 

German 500369-G US$ 40 

Wire Speculum Titanium 

Length: 4.5 cm (1.75 in.) 

Blades: 13.5 mm blades 

Maximum spread: 20 mm 1:1 

555801L . . . . . US$ 34 



1:1 

1:1 

151 



Self-retaining Retractor 


Blades: 2.5 cm 

Maximum spread: 4.5 cm 

Small, self-retaining retractor perfect for small animal 

surgery and dissection. 

503209 . . . . . . . . . . . . . . US$ 95 

Goldstein Retractor 




Blades: 3 x 3 sharp prongs 

Maximum Spread: 1.0cm 

501967 . . . . . . . . . . . . . US$ 142 




501968 . . . . . . . . . . . . . US$ 126 




501969 . . . . . . . . . . . . . US$ 126 

Stevenson Retractor, 8 cm (3 in.) long, 3x3 

prongs, 3 mm deep 

Standard 14131. . . . . . US$ 71 

German 14131-G . . . US$ 106 

1:1 

Modified ALM Self-retaining Retractor 

7 cm (2.75 in.) long, 2x2 prongs 

Smaller, thinner prongs for use on mouse/rat eyelids 

501844 . . . . . . US$ 41 

Maximum spread 15 mm 

Agricola Retractor 





501846 . . . . . . . . . . . . . . US$ 96 

ALM Self-retaining Retractor, 7 cm (2.75 in.) 

long, 4x4 prongs 

Standard 14240 . . . . . . . . . US$ 42 

German 14240-G . . . . . . US$ 95 



1:1 

Maximum spread 55 mm 

Knapp Speculum, 15 x 6 mm 

blades, 8.3 cm (3.25 in.) long, 


Standard 14129 . . . . . . . US$ 53 

German 14129-G . . . . US$ 143 

1:1 

1:1

Jansen retractor 

4.5 in. long, maximum spread 3cm 

3 x 3 prongs, blunt 

Standard 501770 . . . . US$ 67 

German 501770-G . US$ 114 

sharp prongs 

Standard 501859 . . . . US$ 67 

Weitlaner Retractor, self-retaining 


501328 . . . . . . . . . . . . . . US$ 116 501328-G . . . . . US$ 215 

4”, 2x3 prongs, blunt, maximum spread 3cm 

501314 . . . . . . . . . . . . . . US$ 114 501314-G . . . . US$ 224 

4”, 2x3 prongs, sharp, maximum spread 4cm 

501722 . . . . . . . . . . . . . . US$ 126 501722-G . . . . . US$ 180 

5.5”, 3x4 prongs, blunt, maximum spread 4.5cm 

501721 . . . . . . . . . . . . . . US$ 126 501721-G . . . . . US$ 216 

5.5”, 3x4 prongs, sharp, maximum spread 4cm 

501724 . . . . . . . . . . . . . . US$ 144 501724-G . . . . . US$ 180 

6.5”, 3x4 prongs, blunt, maximum spread 6.5cm 

501723 . . . . . . . . . . . . . . US$ 144 501723-G . . . . . US$ 180 

6.5”, 3x4 prongs, sharp, maximum spread 7cm 

Gelpi Retractor 


3.5” 501329 . . . . . . . US$ 95 

4.5” 501719 . . . . . . US$ 102 

5.5” 501720 . . . . . . US$ 114 501720-G. . . . . . US$ 239 

Senn Retractor 

7-in. long 


sharp 501327. . . . . . US$ 34 501327-G. . . . . . . US$ 88 

blunt 501718 . . . . . . US$ 32 501718-G . . . . . . . US$ 88 



1:1 

1:1 

1:1 

153 



Sapphire Knife 

Clear blade increases view of tissue 

Chemically inert to lymph, blood, and disinfectant solutions 

Single crystal sapphire (Al2O3), while not as hard as diamond, is still hundreds of times 

harder than steel razor blades. The durability of the blade guarantees a unique operational 

life that exceeds one hundred incisions In addition, the blade and handle can be sterilized 

using any currently known procedure. 

The super sharp cutting edge, mirror surface finish, and low friction coefficient combine 

to create an accurate, clean cut with minimal tissue trauma. Scarring is thus reduced and 

incisions heal quickly. 

Both the stainless steel and titanium handles feature safety 

locks to protect the super sharp cutting edge from damage and 

prevent injuries to medical personnel. 

30° 

Crescent Blade 

front & side view 

Custom sizes available 

— call for details 

Sapphire Knife Protection Tray 



60° 

500313 500316 501736 

Phaco Blade 

front & side view 

501761 501762 

500317 Stainless Handle for Sapphire Knife, 13 cm long, retractable US$ 59 

501811 Titanium Handle for Sapphire Knife, 13 cm long, retractable US$ 144 

Single Edge Blades for use with above handles 500317 & 501811 

501760 Sapphire Blade, single edge, 1 mm wide, 0.22mm thick, 15° US$ 47 






500325 Sapphire Blade, single edge, 1.4 mm wide, 0.3mm thick, 35° US$ 78 

Double Edge Blades for use with above handles 500317 & 501811 

500314 Sapphire Blade, double edge lance, 1 mm wide, 0.3mm thick, 35° US$ 65 

500316 Sapphire Blade, double edge lance, 2 mm wide, 0.3mm thick, 60° US$ 126 

500326 Sapphire Blade, double edge lance, 1.7 mm wide, 0.3mm thick, 60° US$ 143 

Specialty Handle and Blades 

501763 Stainless Angled Handle for Sapphire Knife, 13 cm long, retractable US$ 59 

501812 Titanium Angled Handle for Sapphire Knife, 13 cm long, retractable US$ 144 

501761 Crescent Sapphire Blade, 2.8 mm wide, 0.3mm, (fits handles 501763 & 501812) US$ 198 

501762 Phaco Sapphire Blade, 2.7/3.4 mm wide, 0.3mm, (fits handles 501763 & 501812) US$ 210 

90° 

500317 (blade sold separately) 

501763 (blade sold separately) 

Protect your sapphire knife with a sterilization/ 

protection tray. Fully autoclavable tray safely holds 

two sapphire knife handles for sterilization and 

storage. 

501729 Sterilization/Protection Tray US$ 36

Scalpels, Knives, Blades and Handles 

Scalpel Handle #3 

13 cm (5 in.) long, stainless steel 

Standard 500236 . . . . . . . US$ 10 

German 500236-G . . . . . US$ 26 


14 cm (5.5 in.) long, stainless steel 

Standard 500237 . . . . . . . . US$ 10 

German 500237-G . . . . . US$ 26 


16 cm (6.25 in.) 

long, stainless steel 

Standard 500238 . . . . US$ 13 

German 500238-G US$ 43 

Sterile stainless steel blades 

Blade Safe surgical blade remover 

will remove blades easily and safely from any 

style surgical blade handle 

501335 . . . . . US$ 26 

20 

10 

11 

12 

15 

For Blades #10 ~ #15 



501249 Needle Blades, 6/pk, 4.5 cm . . . . . . . . . . . . . . . . . . US$ 108 

501250 Miniature Edged Blades, curved tip, 12/pk, 3.5 cm. US$ 19 

501251 Miniature Edged Blades, round tip, 12/pk, 3.5 cm . US$ 23 

21 

22 

23 

24 

25 

All stainless steel scalpel blades are made by Feather®, using a precise 

beveling technique to create the edge’s micron sharpness. They are the 

finest blades available. 

500239 Scalpel Blades #10, stainless steel, sterile (100 / box) US$ 43 










Round Knurled Blade Handle, stainless steel, 10 cm long 

Standard 501247 . . . . . US$ 37 

German 501247-G . . . US$ 60 

Hex Blade Handle, stainless steel, 10 cm long 

Standard 501248 . . . . . US$ 37 

German 501248-G . . US$ 60 



1:1 

155 



Disposable Safety Scalpels 

Retractable blade protects from accidental 

injury. Complies with the OSHA Directive. 

501337 Size #10, pack of 10 . . . . US$ 43 

501338 Size #11, pack of 10 . . . . US$ 43 

501339 Size #15, pack of 10 . . . . US$ 43 

Microsurgical Knives 

Sterile, disposable 

Micro Dissecting Knife 

13 cm long, 1 mm blade, right angle 

14135. . . . . US$ 54 

Razor Blade Holder 

12.5 cm (5 in.) long 

round tips 

S-shape jaws 

14139. . . . . . . . . . US$ 116 

500348 Disposable Scalpel, No. 10, sterile, (10/box) US$ 12 









Tip Profile: 

Razor Blade Holder 

12 cm (4.75 in.) long Tip Profile: 

round tips 

convex/concave jaws 

Standard 14134 . . . . . . . US$ 92 

German 14134-G . . US$ 302 

501731 Microsurgical Knife, 15° 3 mm blade, 13.5 cm (5.25 in.) long (package of 6) US$ 83 

500249 Microsurgical Knife, 15° 5 mm blade, 13.5 cm (5.25 in.) long (package of 6) 

US$ 83 

500250 Roundstock Ophthalmic Knife, 15° 5.7 mm blade, 13.5 cm (5.25 in.) long (package of 6) US$ 101 

Special jaw shape prevents blades from slipping 



1:1 

1:1 

1:1

Ear Punches and Ear Tags 

501866 Ear Tags, pack of 100, sequence 000-099 US$ 36 











Rongeurs, Cutters, and Punches 

Tip Profile: 

Ear Punch 

5 cm (2 in.) long, 2 mm diameter 

500075 . . . . . . US$ 28 

Ear Punch 


2 mm diameter 500077 . . . . US$ 58 

1 mm diameter 500076 . . . . US$ 58 

503253 Bone cutter, strong serrated tips, straight, 10.5cm . . . . . US$ 31 

503254 Bone cutter, strong tips, curved, 10.5cm . . . . US$ 29 

503255 

Bone cutter, strong serrated tips, 

curved, 10.5cm 

US$ 31 

503252 

Bone cutter, strong tips, 

straight, 10.5cm 

US$ 29 

Ear Tag Applicator 

Not actual size. 

503292 . . . . . . . . . . . 90 



1:1 

Rongeur, Micro Friedman 

15 cm (5.9 in.) long Jaw Width 


1.3mm 14292 . . . . . . . US$ 89 14292-G . . . . . US$ 211 

0.8 mm 501332 . . . . . . US$ 91 

1.0 mm 501333 . . . . . . US$ 91 

1:1 

1:1 

157 



Mini Blumenthal Rongeur 

11 cm (4.3 in.) long 

jaw width 2 mm 

Standard 14090 . . . . . . US$ 89 

German 14090-G . . US$ 150 

Tip Profile: 

Blumenthal Rongeur 


jaw width 3 mm 

Standard 14091 . . . . . . US$ 76 

German 14091-G . . US$ 157 

Single Blade Bone Cutter 

14 cm (5.5 in.) long 

jaw length 23 mm 

blade tip width 1 mm 

block tip width 2 mm 

501990 . . . . . . US$ 86 

Cutting Block 

1:1 

Cutting Blade 

1:1 

Tip Profile: 

The Corneoscleral punch is excellent for removing the skull 

of a small animal without damaging the brain or spinal 

cord. The lower jaw of the punch is a flat plate which can be 

inserted into the skull with much less damage to the brain 

than a ronguer. 

500079 Corneoscleral Punch , 8 cm (3 in.) long, 2 mm wide US$ 91 

500143 Corneoscleral Punch, 8 cm (3 in.) long, 1.5 mm wide US$ 91 

Tip Profile: 



1:1 

Tip Profile: 

Friedman Rongeur 


jaw width 2.5 mm 

Standard 14089 . . . . . . US$ 79 

German 14089-G . . . US$ 148 

15 cm long (6 in.) 

Standard 503295 . . . . . US$ 78 

1:1 

1:1

1:1 

Cuticle nipper 

11 cm (4.3 in.) long, angle, ring handles 

Standard 500137 . . . . . . . . US$ 30 

German 500137-G . . . . . US$ 98 

Nail nippers 

14 cm (5.5 in.) long, concave jaws, 

double spring 

Standard 500362 . . . . . . US$ 22 

German 500362-G . . US$ 101 

Titanium Wire Cutter 

15 cm (6 in.) long, 15 mm Tungsten Carbide 

blades, light weight (60g) 

500450 . . . . . . . . US$ 288 

Applications 

● MRI 

● Marine biology 

Bone Cutter 

one serrated blade, 11 cm (4.3 in.) long, 

9 mm blades 

501269 . . . . . . US$ 94 

Tip Profile: 

never 

ruSTS! 

Tip Profile: 

1:1 

Tip Profile: 

1:1 

Tip Profile: 



159 



Liston Bone Cutting Forceps 

19 cm (7.5 in.) long, straight 500358 . . . . . US$ 66 

14 cm long, straight 500462 . . . . . US$ 58 

Tip Profile: 

Hooks and Probes 

Tungsten Dissection Probes 

● Used for separating cells ● Made of pure tungsten, a hard and biocompatible metal 

● Less than one micron in diameter ● Much stronger and more durable than glass probes 

Tip Profile A 

Tip Profile B 

Handle for Probe, stainless steel 

11 cm (4.3 in.) long 500448 . . . . . US$ 53 

7 cm (2.75 in.) long 501301 . . . . . US$ 54 

Probe 

Stainless steel, 14cm (5.5 in.), 

1.0 mm diameter 

501313 . . . . . . . . . US$ 10 

Dura Hook 

Sharp, 15 cm 

503322 . . . . . . . . . . US$ 72 

● All probes are 50 mm long (10 pieces per package) 

Tip Profile A 

500133 Tungsten Dissecting Probe, 0.125mm diameter rod US$ 86 



Tip Profile B 




Illustration - not shown actual size 



1:1 

1:1

500458 Straight Dissecting Needles, 14 cm (5.5 in.) long, 12/box 

500460 Curved Dissecting Needles, 14 cm (5.5 in.) long, 12/box 

Meyhoefer Curette 

14cm (5.5 in.), 1.5mm diameter 

Standard 501773 . . . . . . . . US$ 35 

German 501773-G . . . . US$ 157 

Tyrell Hook, sharp, 13 cm (5 in.) long 

Standard 14136 . . . . . . . . . US$ 34 

German 14136-G . . . . . . . US$ 53 

Wecker Spatula 

14cm (5.5 in.), 3mm wide blade 

Standard 501772 . . . . . . . . US$ 35 

German 501772-G . . . . . US$ 161 

(German-made spatula is 2mm wide) 

Dura Dissector 

20 cm 

503336 . . . . . . . . . . US$ 44 

Brain Spatula 

22 cm 

503338 . . . . . . . . . . US$ 12 

Castroviejo Caliper 

75 mm (3 in.) long 

20 mm scale 

501200 . . . . . US$ 144 

1:1 

Not shown actual size 

Not shown actual size 



US$ 14 

US$ 14 

Vascular Measuring Ruler 

503211 . . . . . US$ 173 

1:1 

1:1 

1:1 

161 



Physiology Kit I 

SuperCut Tenotomy Scissors curved (#14396) 

Rongeur 3mm jaw (#14091) 

Utility Scissors (#501322) 

Operating Scissors straight Sharp/Blunt (#14192) 

Dumont Tweezer #5 (#14098) 

Flat Jaw Tweezers (#501303) 

Probe 1.0 mm diameter, blunt (#501313) 

Order Number: KIT-PHYSIO-I 

US$ 150 

US$ 239 Value 

Add the Stainless Steel Protection 

Case to any kit (#14213) 

for an additional US$ 50 

US$ 336 

US$ 506 Value 

Physiology Kit II 

Vannas Scissors (#14003) 

SuperCut Iris Scissors straight (#14218) 

Rongeur 1.3mm jaw (#14292) 

Utility Scissors (#501322) 

Operating Scissors straight Sharp/Blunt (#14192) 

Dumont Tweezer #5 (#14098)) 

Probe 1.0 mm diameter, blunt (#501313) 

Stevenson Retractor (#14131) 

Iris Forceps curved (#15915) 

Adson Forceps 1x2 teeth (#500092) 

Olsen-Hegar Needle holder (#500227) 

Order Number:PHYSIO-II 

Now includes 

intrument 

folder 



Rat Kit 

US$ 179 

US$ 268 Value 

US$ 203 

US$ 293 Value 

Dumont #5 (#14098) 


Iris Forceps, serrated (#15915) 

SuperCut Iris Scissors, straight 10cm (#14218) 

Alm Retractor (#14240) 

Needle Holder (#14110) 

Blunt Probe, 1.0 mm diameter (#501313) 

Order Number: RATKIT 

Mouse Kit 

Dumont #5 (#14098) 


Iris Forceps, curved, serrated (#15915) 

Dissecting Scissors, straight 10cm (#14393) 

Wire Retractor (#14130) 

Needle Holder (#14109) 

Blunt Probe, 1.0 mm diameter (#501313) 

Order Number: MOUSEKIT 

Now includes 

storage case! 



163 



Mouse Vessel Cannulation Kit 

Kit includes: 

Vessel Cannulation Forceps 


Fine Serrated Forceps 

Dumont #5 Tweezers 

Alm Retractor 

MicroFil 28 ga. 

Order Number 

501895 

Micro Cannula 

US$ 275 

US$ 360 value 

l 0.4mm O.D., 0.2mm I.D. tubing 

l Autoclavable 

l Biocompatible Perfluorocarbon 

tubing material 

KZ1101 Micro Cannula, 3" US$ 96 

Vessel Cannulation Forceps 

0.5mm diameter 

This micro cannula is ideal for placement in 

the carotid or femoral artery of mice, rats, 

and other small animal blood vessels. It can 

be used with a pressure transducer (WPI’S 

BLPR2) for blood pressure measurement, or in 

conjunction with a micro-syringe injection system 

(like WPI’s UMPIII or MMP pumps). The incorporated 

standard female luer fitting makes connecting to existing 

experimental plumbing quick and easy. The cannula is provided 

with a contoured-tip stainless steel stylet (trocar) to facilitate placement 

using established techniques. A movable “shoulder” ring provides 

a tie-in point to prevent accidental removal. The cannula may be left in 

place for two hours or more, and with proper care and cleaning, may be reused 

multiple times. Instructions for use included. 



TurtleSkin ® 

FullCoverage 

Entire Hand Protection — 

Fingertip to Forearm 

While no glove is puncture or cut proof, Turtle- 

Skin FullCoverage gloves give you puncture and 

cut protection covering the entire hand. Surprisingly 

soft and comfortable, these gloves offer 

over 35 ounces of needle protection. 

501888 TurtleSkin® Gloves, small, pair 

US$ 95 

501889 TurtleSkin® Gloves, medium, pair US$ 95 

501890 TurtleSkin® Gloves, large, pair 

US$ 95 

501891 TurtleSkin® Gloves, extra large, pair US$ 95 

TurtleSkin is a registered trademark of Warwick Mills, Inc. 

DCAP Guillotine for Rodents and other small animals 

(opening 1.5 x 1.5 in.) US$ 594 

DCAP-M Guillotine for large rodents and other medium animals 

(opening 2.5 x 2.5 in.) US$ 990 

DCAP-L Guillotine for larger animals (opening 4” x 4”) US$ 1,434 

Rodent 

Guillotine 

● Large, stable base 

● Hardened blades for 

long service 

● Ambidextrous 

configuration 

The small animal guillotine has been completely 

redesigned for ease of use and extra added 

safety features. The blades are drawn together by 

magnetic force to ensure a clean and precise cut 

through very strong bones and skin. 

There is a large base for stability, long handle for 

extra leverage, spring action so the blades can not 

fall down unexpectedly, hardened stainless blades 

for endurance, simplified construction for easy 

maintenance. The fluoropolymer coated surface 

on the base makes cleaning easy. 

The guillotine is considered one of the most humane methods to 

dispense with a subject. 



165 



Disposable Biopsy Punches, package of 50 

Individually packaged in color-coded, transparent, sturdy blister pack to 

protect cutting edge 

Seamless stainless steel razor sharp cutting edge 

Ribbed handle provides maximum control and comfort 

501816 1.5mm diameter US$ 155 



Uni-Core Punches 

Cuts, retrieves, and stores, cored samples in one operation 

The Harris Uni-Core punch consists of a razor sharp stainless steel cutting 

tip designed to cut, retrieve and store cored samples from source materials 

such as paper, gels, cloth, leaves, paint chips, films, tissue or other thin or soft 

substrates. The tip is protected by a removable cover cap. The body is made 

from polypropylene plastic. Each Harris Uni-Core is individually pouched and 

ethylene oxide sterilized. 

501905 0.50mm ID, 1.0mm OD US$ 18 

501906 0.75mm ID, 1.25mm OD US$ 18 

501907 1.25mm ID, 1.75mm OD US$ 18 

501908 2.0mm ID, 2.5mm OD US$ 18 

501909 5.0mm ID, 5.5mm OD US$ 18 

501910 6.0mm ID, 6.5mm OD US$ 18 

501911 7.0mm ID, 7.5mm OD US$ 18 

501912 8.0mm ID, 8.5mm OD US$ 18 

Achieve hemostasis of bone by applying a 

small amount of sterile bone wax. The wax is a 

combination of beeswax, isopropyl palmitate, and 

mineral oil which stops bleeding at the site. 

501771 Bone Wax, sterile, 3g US$ 30 

Rodent Brain Matrices 

WPI offers one of the largest selections 

of brain matrices available. Made 

of acrylic, or stainless steel, these 

matrices are sturdy and can be heated, 

chilled, autoclaved (stainless steel only), scrubbed 

— and stand up to rigorous daily use. Coronal matrices 

have the additional feature of a mid-line sagittal cut to facilitate 

splitting of the left and right hemispheres. Sections can be as fine as 

1-mm. The olfactory/spinal/notch is cut into each matrix. 

● Large species selection 

● From mouse to rat 

● Repeatable sections to 1 mm 

● Can be chilled and sterilized 

● Available in acrylic or stainless steel 

RBMA-200C Adult mouse, coronal slices, acrylic US$ 204 

RBMA-200S Adult mouse, sagittal slices, acrylic US$ 204 

RBMA-300C Rat, 175-300g, coronal slices, acrylic US$ 228 

RBMA-300S Rat, 175-300g, sagittal slices, acrylic US$ 228 

RBMA-600C Rat, 300g-600g, coronal slices, acrylic US$ 228 

RBMA-600S Rat, 300g-600g, sagittal slices, acrylic US$ 228 

RBMS-200C Adult mouse, coronal slices, stainless steel US$ 702 

RBMS-200S Adult mouse, sagittal slices, stainless steel US$ 702 

RBMS-300C Rat, 175-300g, coronal slices, stainless steel US$ 702 

RBMS-300S Rat, 175-300g, sagittal slices, stainless steel US$ 702 

RBMS-600C Rat, 300g-600g, coronal slices, stainless steel US$ 702 

RBMS-600S Rat, 300g-600g, sagittal slices, stainless steel US$ 702 

BLADES Single-Edge Blades (pkg of 100) US$ 48 



1:1

Fantastic 

Magnifying 

Glasses! 

● High quality coated optics 

● Adjustable independent focus for each eye 

● Adjustable interpupillary distance 

● Mounted on spectacle frames 

501331 — 4x Binocular Loupe 

BINONULAR LOUPES 

PART # PRISM POWER WORKING 

DISTANCE 

PRICE 

500370 2.5x 35~50 cm US$ 420 

501331 ✔ 4.0x 34 cm US$ 714 

503640 2.5x 50 cm US$ 431 

503641 3.0x 34 cm US$ 438 

503642 3.0x 50 cm US$ 443 

503643 3.5x 34 cm US$ 450 

503644 3.5x 50 cm US$ 455 

503645 ✔ 3.5x 34 cm US$ 630 

503646 ✔ 3.5x 50 cm US$ 642 

503622 ✔ 4.0x 50 cm US$ 719 

503623 ✔ 4.5x 34 cm US$ 750 

503624 ✔ 4.5x 50 cm US$ 762 

Protective velvetlined 

wood case 

included! 

500370 — 2.5x Binocular Loupe 

Gain control — see clearly and 

accurately 

Unlimited uses, from surgical 

procedures to microcircuitry 

assembly 

Priced so that everyone in the 

lab can have one! 

Veterinary surgeons find WPI’s binocular 

loupes useful for surgery on Koi fish at the 

International Conference on Exotics wet lab 

in Key West, Florida. 

Photo by Marc Kramer, DVM 



167 



Student Dissecting 

Kit 

Includes: 

Dissecting Scissors, 4.5” 

Dissecting Scissors, 4” 

Dressing Forceps, 5.5” 

Micro Dressing Forceps, 4” 

#4 Knife Handle 

Straight Teasing Needle 

Angled Teasing Needle 

#22 Surgical Blade 

Canvas Roll-up 

501336 . . . . . . . . . . . . . . US$ 23 

Surgery Table 

Constructed of clear acrylic, this economical surgery table features adjustable 

nylon cords for fast animal restraint and a slight incline for easy viewing. 

The acrylic construction is durable, yet easy to clean. The nylon cords 

can be adjusted at the point of contact with the animal and also under the 

table itself. 

The surgery table is designed for use in dissecting small animals such as 

frogs, birds, mice, rats, guinea pigs, etc. 

SURGERY TABLE SpECIfICATIONS 

Length 20 cm 

Width 14.5 cm 

Height 4 cm (rear) 

2 cm (front) 

501892 Surgery Table US$ 58 

Silicone 

Dissecting pad Kit 

Make your own silicone dissecting pads easily and 

quickly. Mix the 2-part silicone right in the plastic petri 

dishes and allow to cure 24 hours at room temperature. 

Kit includes enough silicone to prepare 20 dishes. 

Kit Includes: 

2-Part SylGard silicone elastomer 

20 plastic petri dishes, 51mm diameter, with lids 

Pins 

501986 . . . . . . . . . . . . . US$ 138 



Cautery 

Disposable Adjustable High Temperature Cautery 

Fine Tip (#500394) 

1500-2100° F 

10/box, sterile 

Tip Profile: 

500388 . . . . . . . . . . . . . . . US$ 172 

High Temperature Cautery 

2 replaceable batteries (AA) 

1 interchangeable tip (#500394) 

2200° F 

500389 . . . . . . . . . . . . . . . US$ 64 

High Temperature Cautery Kit 

contains 1 #500389 handle, 

2 #500394 tips 

2 #500393 tips 

500392 . . . . . . . . . . . . . . . US$ 74 

Disposable Adjustable Low Temperature Cautery 

Fine Tip (#500396) 

700-1200° F 

10/box, sterile 

501090 . . . . . . . . . . . . . . US$ 155 

Low Temperature Cautery 

1 replaceable battery (AA) 

1 tip (#500396) 

500390 . . . . . . . . . . . . . . . US$ 54 

Low Temperature Cautery Kit 

contains 1 #500390 handle 

2 #500396 tips 

2 #500395 tips 

500391 . . . . . . . . . . . . . . . US$ 74 

Disposable High Temp Loop 

Tips, 2000° F, 10/box, sterile, 

for use in conjunction with 

#500389 and #500392 

500393 . . . . . . US$ 67 

Tip Profile: 

Disposable High Temp Fine Tips, 

2200° F, 10/box, sterile, for use 

in conjunction with #500389 

and #500392 

500394 . . . . . . US$ 67 

500394 tip 

500394 tip 500393 tip 

500396 tip 

500395 tip 

Disposable Low Temp Elongated 

Tips, 1100° F, 10/box, sterile, 

for use in conjunction with 

#500390 and #500391 

500395 . . . . . . US$ 67 

500389 handle 

500390 handle 

500396 tip 

Disposable Low Temp Fine Tips, 

1300° F, 10/box, sterile, , for use 

in conjunction with #500390 

and #500391 

500396 . . . . . . US$ 67 



169 



Thermal Cautery Unit 

Provides consistent, accurate hemostasis 

Tradional thermal cautery utilizes heat in the 

form of direct current to perform coagulation. 

This method eliminates the possibility of 

alternate site burns that can occur with 

electrosurgery. Only the heated wire tip comes 

in contact with the tissue and current does 

not enter the patient’s body. WPI’s Thermal 

Cautery Unit provides all the cautery power 

necessary for treating numerous minor surgical 

conditions and is ideal for applications such as 

dermatological, ophthalmological, occupational 

health, ENT, and plastic surgery cases, or any 

procedure that requires accurate hemostasis. 

The Thermal Cautery Unit maintains the 

desired temperature during tissue contact 

and does not rapidly diminish like disposable 

battery powered cauteries. The autoclavable 

handpiece with six-foot cord accepts an 

assortment of reusable thermal cautery 

electrodes, allowing the surgeon to have 

the flexibility to perform a wide variety of 

procedures. This unit will outlast batterypowered 

units and save money on replacement 

batteries. 

a b c d e 

Handpiece and electrodes A, C, and E 

are included with unit. 

CAUTERY UNIT SPECIFICATIONS 

LINE VOLTAGE 110V/220V, 60Hz/50Hz 

OUTPUT WAVE SHAPE Clipped Sinusoidal 

OUTPUT POWER 0-30 Watts ± 6 Watts (0.2 Ohm Load) 

MAXIMUM OUTPUT POWER 36 Watts (0.2 Ohm Load) 

DIMENSIONS 13cm x 13cm x 20cm (dxwxh) 

SHIPPING WEIGHT 5 lb (2.3kg) 

501292 Thermal Cautery Unit, 110V US$ 827 

501293 Thermal Cautery Unit, 220V US$ 827 

501294 Replacement Handpiece for 501292 & 501293 US$ 217 

501295 Loop Tip (shown a) included with unit US$ 71 

501296 Fine Tip-Flat (shown b) US$ 71 

501297 Loop Tip-Angled (shown c) included with unit US$ 71 

501298 Ball Point (shown d) US$ 78 

501299 Fine Tip (shown e) included with unit US$ 71 

501300 Wall Bracket for 501292 & 501293 US$ 67 



High Frequency Dessicator 

500397 Dessicator Unit (110V) US$ 2030 

501214 Dessicator Unit (220V) US$ 2030 

Dessicator Unit Includes 

501085 3-button handpiece, 1 each 

501076 Sharp Tip Non-sterile, 100 box 

501078 Blunt Tip Non-sterile, 100 box 

501084 Wall mount Kit, 1 each 

OPTIONAL ACCESSORIES 

501075 Footswitch US$ 220 

501083 Forceps Cord US$ 85 

OPTIONAL ACCESSORIES 

Reusable Bipolar Forceps Reusable (>20 autoclaving cycles) 

501005 Bipolar 71/2" Bayonet Fine (1.0 mm), Smooth, Each US$ 396 

501006 Bipolar 71/2" Bayonet Med. (2.0 mm), Smooth, Each US$ 396 

501007 Bipolar 7" Straight, Fine (1.0 mm), Smooth, Each US$ 396 

501008 Bipolar 7" Curved, Fine (1.0 mm), Smooth, Each US$ 396 

501009 Bipolar 5" Curved, Fine (1.0 mm), Smooth, Each US$ 396 

501010 Bipolar 51/2" Straight, Med. (2.0 mm), Smooth, Each US$ 396 

501011 Bipolar 5" Straight, Fine (1.0 mm), Smooth, Each US$ 396 

Reusable Active Electrodes 

501004 Reusable Electrode, Each 

501013 Angled, Sharp Electrode, Reusable, Each US$ 46 

501014 Short Angled, Ball, ReusableEach US$ 60 

501015 Short Straight, Ball, Reusable, Each 

501016 Short Straight, Needle, Reusable, Each US$ 60 

501017 Angled, Fine Needle, Reusable, Each US$ 65 

501018 Long, Straight Ball, Reusable, Each US$ 60 

501019 Long, Straight Needle, Reusable, Each US$ 60 

Dispersive Electrode 

501074 Reusable Dispersive Electrode for 500397 US$ 252 

Dermal Tips 3/32" stainless steel shaft 

501076 Sharp Dermal Tip, Non-Sterile, 100/box 

501077 Sharp Dermal Tip, 3/32" Sterile, 50/box 

501078 Blunt Dermal Tip, 3/32" Non-Sterile, 100/box 

501079 Blunt Dermal Tip, 3/32" Sterile, 50/box 

This High Frequency Dessicator produces radio frequency current 

which is useful for the removal and destruction of superficial 

cutaneous and mucosal lesions. It performs dessication and 

fulguration procedures.The digital power control system allows you 

to change from low to high power by rotating the power knob or 

pushing the buttons on the handpiece. 

DESSICATOR SPECIFICATIONS 

MAIN VOLTAGE 110/220 VAC 

MAIN FREqUENCy 50/60 Hz 

MAIN CURRENT 1.00A / 800 mA. max. 

POWER CONSUMPTION 80 W 

DUTy CyCLE 10S/30S 

MAIN FUSES 

HF OUTPUT CHARACTERISTICS 

2 x 1.25A (slow blow) 110 model 

2 x 800 mA (slow blow) 220 model 

OUTPUT POWER 30W/1000 W 

OUTPUT FREqUENCy 550 kHz 

PEAK OPEN CIRCUIT VOLTAGE 

SAFETy 

5000 V 

BASIC CONSTRUCTION In accordance with EN 60601-1 

MODE OF OPERATION Intermittent Operation 

PROTECTION CLASS Class 1 Equipment 

OUTPUT TyPE Type BF 

DIMENSIONS 22 x 15 x 10.5 cm (8.6” x 6” x 4.2”) 

WEIGHT 2.25 kg (5 lb) 

Unit Accessories 

501080 Top Tray and Clamp Stand for 501081, Each 

501081 Mobile stand for 500397 

501082 Table top stainless steel stand for 500397 

501083 Forceps Cord for 500397 

501084 Wall Mount Kit US$ 30 

501085 3 Button Power Control Pencil for 500397 

501075 Footswitch, Each US$ 220 

#501078 — 5.5 cm 

#501076 — 5.5 cm 



171 



Economy 

Electrosurgical Unit 

Electrosurgery utilizes alternating current at radio frequencies to cut and 

coagulate. Using this method, the current enters the patient’s body and 

the patient becomes part of the electrical circuit. This requires the use of 

a return, or indifference plate. 

This economically priced electrosurgical unit has 10 levels of output 

intensity, three operational modes (cut, coagulate, and cut/coagulate), and 

various choices of electrodes. 

The unit comes complete and ready-to-use with a handpiece, 

indifference plate, footswitch, and one of each electrodes. All accessories 

can also be ordered separately. 

ELECTROSURGICAL UNIT SPECIFICATIONS 

OPERATION FREqUENCy 1.5 MHz 

STABLE & FINE POWER SETTING 10 Steps 

POWER SUPPLy 115V ± 10% - 50/60Hz 1.8A, 210VA 

230V ± 10% - 50/60Hz 0.9A, 210VA 

OUTPUT POWER 70 WATTS ± 5% 

WORKING FRqUENCy 1.5-1.7 MHZ ± 5% 

DIMENSIONS 24cm x 22cm x 8.5cm (lxwxh) 

SHIPPING WEIGHT 10 lb (4.5kg) 

OmniDrill35 

This line-powered micro drill will make easy work of grinding, finishing, 

cutting, and drilling bone, teeth, and other material. The high-torque 

35,000 rpm (maximum) motor is quiet and has minimal vibration which 

reduces wear on the motor and provides greater comfort for the user. 

It also features a forward and reverse switch, “E Type” handpiece, and 

handpiece holder. The handpiece has a removable nose cone that can be 

cleaned and sterilized. It accepts 3/32” and 2.33 mm bur shanks. Unlike 

battery-powered drills, this unit will maintain consistent power for the 

duration of use. The wide range of speeds allows the user to control the 

amount of heat generation. 

The following accessories are included with the Micro Drill System: 

Qty Description 

4 Abrading Tip, Rubber 

1 Abrading Tip, Stone 

1 Accessory Stand 

1 Ball Mill, Carbide, #1, .031” Diameter 







1 Ball Mill, Carbide, #1/4, .019” Diameter 

1 Ball Mill, Carbide, #1/2, .027” Diameter 

4 Cutoff Disk 

1 Mandrel, Screw 

1 Mandrel, Threaded 

OMNIDRILL35 SPECIFICATIONS 

INPUT 110V, 50/60 Hz 

OUTPUT 0-32 Vdc 

FUSE 1 amp 

OPERATING SPEED RANGE 0-35,000RPM 

DIMENSIONS 178 x 114 x 89mm (7 x 4.5 x 3.5in.) 

WEIGHT 1.7kg (3.75lbs) 

Unit includes everything 

pictured 

501274 Electrosurgical Unit, 110V US$ 888 

501285 Electrosurgical Unit, 220V US$ 948 

501273 Handpiece for electrodes, Ø 1.6mm shaft US$ 83 

501275 Indifference Plate US$ 47 

501277 Footswitch US$ 71 

501278 Diamond Shape Loop Electrode, Ø 1.6mm shaft US$ 23 

501279 Small Loop electrode, Ø 1.6mm shaft US$ 23 

501280 Large Loop Electrode, Ø1.6mm shaft US$ 23 

501281 Fine WIre electrode, Ø 1.6mm shaft US$ 23 

501282 Wire Electrode, Ø 1.6mm shaft US$ 23 

501283 Small Oval Loop Electrode, Ø 1.6mm shaft US$ 23 

501284 Ball Electrode, Ø 1.6mm shaft US$ 23 

501286 Set of 7 Electrodes US$ 120 

503598 OmniDrill35 Micro Drill System, 110 V US$ 839 

503599 OmniDrill35 Micro Drill System, 220 V US$ 839 

REPLACEMENT ACCESSORIES 

501850 Abrading Tip, Rubber, pk of 20 US$ 54 

501851 Abrading Tip, Stone, pk of 5 US$ 36 

501852 Accessory Stand US$ 12 

501853 Ball Mill, Carbide, #1, .031” Diameter, pk of 5 US$ 59 







501860 Ball Mill, Carbide, #1/4, .019” Diameter, pk of 5 US$ 59 

501861 Ball Mill, Carbide, #1/2, .027” Diameter, pk of 5 US$ 59 

501862 Cutoff Disk, pk of 20 US$ 54 

501863 Mandrel, Screw, pk of 5 US$ 47 

501864 Mandrel, Threaded, pk of 5 US$ 47 



501729 

Fine surgical instruments are too valuable not 

to protect. WPI’s sterilizing trays help reduce 

damage from everyday use. With top quality 

structural Integrity, these trays are ideal for 

the handling and storage of all standard 

microdissection and surgical instruments. 

● GE’s ULTEM ® resin ensures product strength, 

structural integrity and extended life cycle. 

● See-through lids make it easy to locate the right instrument. 

● Suitable for all methods of sterilization (autoclave, steam, dry heat and 

chemical). 

● Unique “grid” design in base makes it easy to install the silicone finger 

mat required to protect the delicate instruments. 

Combination Sterilization 

Tray & Storage Case 

Stainless steel sterilization case 

with silicone holding pads 

197 x 107 x 32 mm 14213 ............. US$ 88 

230 x 150 x 50 mm 501934 ....... US$ 119 

Sterilizing Trays 

500252 Sterilizer tray, 15 x 6 x 2 cm (6 x 2.5 x 0.75 in.), base, silicone mat, lid US$ 36 

500253 Sterilizer tray, 19 x 10 x 2 cm (7.5 x 4 x 0.75 in.), base, silicone mat, lid US$ 62 

500254 Sterilizer tray, 25.5 x 15 x 2 cm (10 x 6 x 0.75 in.), base, silicone mat, lid US$ 94 

501728 Sterilizer Tray, 25.5 x 15 x 4 cm (10 x 6 x 1.5 in.), base, insert tray, lid, 2 mats US$ 216 

501729 Sterilizer Tray for Knife 15 x 6 x 2 cm (6 x 2.5 x 0.75 in.), base, lid, 2 bars US$ 36 

500255 Silicone mat, 38 x 25.5 cm (15 x 10 in.) US$ 86 

New 

Larger Size! 



173 



Aluminum Sterilizing Trays 

These sterilization containers are made of hard anodized aluminum 

and can withstand autoclaving and ethylene oxide sterilizing. The nonperforated 

base has two locking clasps that secure the lid in place. The 

perforated lid with disposable filter allows steam and gas to move freely 

in and out of the container during sterilization. A silicone mat may be 

purchased separately and cut to fit the base of the tray. 

501913 Small Aluminum Tray, 300 x 140 x 40 mm US$ 268 

501914 Large Aluminum Tray, 300 x 140 x 70 mm US$ 278 

501915 Single-use Filters, 100 per package US$ 58 

501916 Indication Labels, 100 per package US$ 70 

500255 Silicone Mat, 38 x 25.5 cm US$ 86 

Instrument Tip Protectors 

Protect your valuable instruments during 

cleaning, sterilization, and storage 

Steam and gas sterilizable 

Radiopaque and latex-free 

50 per pack 

501341 Tip Protectors, 1/16” x 3/4” (1.6 mm x 19 mm), size 1, white US$ 35 

501342 Tip Protectors, 5/64” x 3/4” (2 mm x 19 mm), size 2, blue US$ 35 

501343 Tip Protectors, 7/64” x 3/4” (2.8 mm x 19 mm), size 3, green US$ 35 

501344 Tip Protectors, 1/8” x 1” (3.2 mm x 25.4 mm), size 4, red US$ 35 

501345 Tip Protectors, 3/16” x 1” (4.8 mm x 25.4 mm), size 5, yellow US$ 35 

501346 Tip Protectors, 13/32” x 3/4” (10.3 mm x 19 mm), size 6, maroon US$ 35 

501347 Tip Protectors, 1/16” x 3/8” x 1” (1.6 mm x 9.5 mm x 25.4 mm ), size 7, orange US$ 35 

501348 Tip Protectors, 5/64” x 5/8” x 1” (2 mm x 16 mm x 25.4 mm), size 8, brown US$ 35 

501349 Tip Protectors, 1/8” x 1” x 1” (3.2 mm x 25.4 mm x 25.4 mm), size 9, black, US$ 35 

501340 Tip Protectors, Assorted Pack of 50, including at least 5 of each size US$ 35 



Instrument Portfolio 

Store your instruments in style. Elastic bands 

hold instruments in place against soft velveteen 

fabric. Portfolio folds in half and zips closed. 

Large portfolio holds up to 40 instruments, and 

the small portfolio holds up to 10. 

US$ 501319 Instrument Portfolio, Large 54 

US$ 503294 Instrument Portfolio, Small 30 

Half-Liter 

Ultrasonic Cleaner 

Stainless steel tank volume is half a liter. Du rable 

and compact, this unit’s robust all-metal construc 

tion allows for continuous duty. Includes 

lid. 

Dry Sterilizer 

UBATH SPECIFICATIONS 

INPUT POWER 22W 

PEAK OUTPUT 70W, 55 kHz 

TANK CAPACITy 0.53L (18 oz.) 

TANK I.D. 12.1 x 8.6 x 6.6 cm 

(43/4 x 33/8 x 25/8 in.) 

TANK O.D. 13.7 x 10.5 x 12.1 cm 

(53/8 x 41/8 x 43/4 in.) 

SHIPPING WEIGHT 1.8 kg (4 lb.) 

UBATH-Y Ultrasonic Cleaner (110 V) 

US$ 268 

UBATH-Z Ultrasonic Cleaner (220 V, Euro plug) US$ 319 

UBATH-B Ultrasonic Cleaner (220 V, UK plug) US$ 319 

Specify line voltage 

13740 Ultrasonic Detergent (4 lb) US$ 36 

14342 Ultrasonic Detergent (1 gal) US$ 47 

Sterilize your microdissecting and tissue culture in stru ments, thorough 

ly and conveniently, in sec onds. No chem i cals. No flames. 

No risk of burns. No dis in fec tant fluids. Glass beads heated to 

260°C kills all viruses, aer o bic and anaer o bic bac te ria, yeasts and 

spores. (1.5 mm lead-free glass beads in clud ed.) 

GERMINATOR SPECIFICATIONS 

O.D. 17.1 x 13.3 x 12.9 cm 

(6 3/4 x 5 1/4 x 5 1/16 in.) 

I.D. 5.1 x 10.2 cm (2 x 4 in.) 

WEIGHT 2.3 kg (5 lb.) 

14404 Dry Sterilizer (110 V) US$ 521 

500121 Dry Sterilizer (220 V) US$ 624 

14405 Extra Glass Beads US$ 17 



175 



FInd the manual for the care and handling of surgical instrument at www.wpiinc.com/services/manuals 

Cidex Plus 

Excellent biocide for WPI’s nitric 

oxide sen sors and other sen sitive 

instruments which cannot be 

subjected to alco hol or autoclave 

Cidex Plus achieves a high level of 

dis in fec tion in 20 to 45 min utes, with 

com plete steril iza tion in 10 hours. Custom 

test strip allows so lu tion to be 

test ed to de ter mine if min i mum ef fective 

con cen tra tion of gl u t aral de hyde is 

present. Non-cor ro sive to in stru ments. 

Sur fac tant en hanc es wet ting and rinsing 

prop er ties. Mint scent. 

7364 Cidex Plus (quart) US$ 26 

ENZOL 

Enzymatic Detergent 

ENZOL Detergent is a mild pH, 

enzyme-based, pre soak-plus-cleaner 

for re mov ing tough, dried-on or 

hard-to-reach or gan ic matter from 

in stru ments be fore they are dis infect 

ed in CIDEX So lu tion. The proteolyt 

ic en zymes break down organic 

mat ter in one easy step. Enzol is fast 

— re sults be gin in one minute. Proteolyt 

ic en zymes pen e trate and break 

down pro tein, re duc ing the need 

for me chan i cal clean ing. Ef fec tive at 

room tem per a ture (no need for hot 

water). Safe for in stru ments, including 

delicate endoscopes; mild pH reduc es 

like li hood of cor ro sion. Easy to rinse, 

so it won’t clog scopes or leave a 

residue on instru ments. Low foam ing, 

making it effective for use in au tomat 

ed equip ment. 

7363-4 ENZOL (U.S. gallon) US$ 79 

503231 Micro Cleaning Brushes, vial of 100 US$ 29 

Alconox 

Powdered Precision Cleaner 

● leaves no interfering residues on 

reusable labware 

● use with manual cleaning or 

ultrasonic 

● free rinsing 

● corrosion inhibited 

Alconox can be used as a paste, a 

soak, and ultrasonically. It can be 

used on glass, metal, stainless steel, 

porcelain, ceramic, plastic, rubber, 

and fiberglass. It can also be used on 

soft metals such as copper aluminum, 

zinc, and magnesium if rinsed promptly. 

Passes inhibitory residue test for water analysis and is authorized by 

the USDA for use in federally inspected meat and poultry plants. 

Used to remove: soil, grit, grime, buffing compound, slime, grease, 

oils, blood, tissue, salts, deposits, particulates, solvents, chemicals, 

radioisotopes, radioactive contaminants, silicone oils, mold release 

agents 

13740 Alconox Cleaner (4 lbs) US$ 36 

Instrument 

Demagnetizer 

Surgical Instrument 

Lubricant 

Protect your surgical and dissecting instruments with this 

specially formu lat ed lubricant. 

Instantly magnetize or demagnetize 

small surgical instruments and small 

steel parts that are over 1.3" in length 

and 1/8" in diameter. No batteries or 

electricity required. Box is high quality 

molded ABS plastic, impact resistant, 

and cadmium free. Dimensions are 

2" x 2" x1" 

500126 Surgical Instrument Lubricant (8 fl oz) 

501900 Instrument Magnetizer/Demagnetizer 

The innovative step design lets you control the level of magnetism 

imposed on your tools. 

To magnetize a tool — Insert tool into the + opening and slide back 

and forth. Continue this procedure until the desired level of magnetism is 

reached. 

To demagnetize a tool — Insert tool at the lowest – opening. Slide back 

and forth. Continue the procedure, moving up the next step until the tool 

is completely demagnetized. 



US$ 44 

US$ 17

Surgical & Microdissection Tools - Experimetria

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?