USGS HIF Catalog - cuahsi

Preface
The HIF has two decades of experience and dedication in providing quality equipment
and instrumentation support throughout the U.S. Geological Survey. Our top priority is
serving you, our customer. This long-awaited instrumentation catalog is the result of many
hours from dedicated employees who worked above and beyond their normal duties to
provide you with a better understanding of our services, products, and the various
selections of instrumentation we have to offer. We hope it serves you well.
Since stock items are added, modified, and deleted, changes in the catalog will be
inevitable. Therefore, for your convenience, a current, updated copy of the catalog will be
accessible on the HIF home page (http://wwwhif.er.usgs.gov/uo) to print out until another
copy is published. A price list is also available on the Internet, or you may contact the HIF.
(Our non-USGS customers may link to our home page at: http://wwwhif.er.usgs.gov/ofa.)
Future editions of the catalog will improve with suggestions and technical advice you
provide. Please contact us with your input to benefit your fellow Survey employees.
Joanne C. Jones
(jcjones@usgs.gov)
Writer-Editor
March 2000
i
Preface

Acknowledgements
Acknowledgements
Technical Support
Frank Henry, Chief, Field Service Section
Ed Ford, Operations Coordinator (Retired)
Brenda Burke, Computer Assistant
Shera Krieger, Customer Service Assistant
Joe Treadway, Engineering Technician
Sam Wilbourn, Engineering Technician (Retired)
Editorial, Graphics, and Text Preparation Support
Erma Nilsson, Engineering Technician
Barbara Wheat, Contractor
Jennifer Cloud, Contractor
ii (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

Table of Contents
HIF HIF Services
Services
Page 2 Benefits of the HIF Rental Program
Page 3 HIF Lease-to-Own Program
Page 4 HIF Field Assistance
Page 5 HIFQuality Assurance
Page 6 HIF Repair Capabilities
Section A
Velocity Velocity Meters Meters
Meters
Chapter A1 Type AA Current Meter
Chapter A2 Price Pygmy Current Meter
Chapter A3 Ice Meter
Chapter A4 Ultrasonic Velocity Meter (UVM)
Chapter A5 Acoustic Doppler Current Meter
Section B
Nonrecording Nonrecording Stage Stage Stage Gages Gages
Gages
Chapter B1 Staff Gages, English and Metric
Chapter B2 Crest-Stage Gage
Chapter B3 Electric Tape Gage
Chapter B4 Wire-Weight Gage
Section C
Pressure Pressure Sensors
Sensors
Chapter C1 PS-2 Pressure Sensors
Chapter C2 Accubar Pressure Sensors (-3 and -5)
Chapter C3 H-350 Lite Pressure Sensor
Chapter C4 H-310 Non-Submersible Pressure Sensors, DH-21 Downhole
Logger/Sensor
Chapter C5 H-350 Pressure Measurement Systems
Section D
Tagline Tagline Equipment, Equipment, Equipment, Tapes, Tapes, and and Acces Accessories
Acces sories
Chapter D1 Columbus Tagline Reel
Chapter D2 Plastic Tagline Reel
Chapter D3 Lee Au Tagline Reel
Chapter D4 Boat Tagline Reel
Chapter D5 Taglines and Accessories
Chapter D6 Tape
Chapter D7 Lee Au Handline
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 iii
Table of Contents

Table of Contents
Section E
Wading Wading Rod Rod and and Accessories
Accessories
Chapter E1 Top-Setting Wading Rod
Chapter E2 Sectional Wading Rod
Chapter E3 Winter Rod
Section F
Sounding Sounding Reel Reel Equipment Equipment & & Accessories
Accessories
Chapter F1 A-Pack Reel
Chapter F2 A-55 Reel
Chapter F3 B-56 Reel
Chapter F4 E-53 Reel
Chapter F5 Sediment Sampling Reel
Chapter F6 Depth Indicator
Chapter F7 Power Drive and Accessories
Chapter F8 Type-B Connector
Chapter F9 Pressed-Sleeve Connector
Chapter F10 Ellsworth Cable and Accessories
Section G
Boat Boat Equipment Equipment Equipment & & & Accessories
Accessories
Chapter G1 Boat Equipment and Accessories
Section H
Bridge Bridge Equipment
Equipment
Equipment
Chapter H1 Three-Wheel Base
Chapter H2 Type-A Four-Wheel Truck
Chapter H3 Type-A Crane
Chapter H4 Type-E Heavy-Duty Truck
Chapter H5 Type-E Heavy-Duty Crane
Chapter H6 Bridge Board
Section I
Cable Cable Cars Cars and and Accessories
Accessories
Chapter I1 Cable Cars
Chapter I2 Cable Car Accessories
Chapter I3 Cableway Anchor Bar and Accessories
iv (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

Section J
Stopwatch, Stopwatch, Headphone, Headphone, CMD CMD & & Accessories
Accessories
Chapter J1 Stopwatch and Accessories
Chapter J2 Headphone and Accessories
Chapter J3 CMD and Accessories
Chapter J4 Discharge Measurement Expert (DMXpert)
Section K
Sounding Sounding Weights Weights and and and Accessories
Accessories
Chapter K1 Sounding Weights
Chapter K2 Sounding Weight Accessories
Section L
Digital Digital Recorders Recorders (ADR’s) (ADR’s) and and Accessories
Accessories
Chapter L1 F&P Model 1542 Recorder
Chapter L2 L&S Model 7000 Recorder
Chapter L3 Model III Timer
Chapter L4 Jackshafts and Sprockets
Chapter L5 ADR Paper Tapes
Section M
Data Data Loggers, Loggers, Encoders Encoders & & Accessories
Accessories
Chapter M1 Data Loggers
Chapter M2 Data Logger Accessories
Chapter M3 Interface Devices
Chapter M4 Encoders
Section N
Power Power Supplies, Supplies, Battery Battery Battery Cables, Cables, & & Regulators
Regulators
Chapter N1 Power Supplies, Battery Cables, and Regulators
Section O
Float Float Wheels, Wheels, Float Float Tapes, Tapes, and and and Counterweights
Counterweights
Chapter O1 Float Wheels, Floats, and Counterweights
Chapter O2 Float Tapes and Indicators
Section P
Water Water-Quality Water Quality Monitors
Monitors
Chapter P1 Water-Quality Monitor and Accessories, Hydrolab
Chapter P2 Water-Quality Monitor and Accessories, YSI
Chapter P3 Flow-Through Chamber
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 v
Table of Contents

Table of Contents
Section Q
Data Data Collection Collection Platforms
Platforms
Chapter Q1 DCP and Accessories
Chapter Q2 Antennas and Solar Panels
Chapter Q3 Grounding Equipment
Section R
NAWQA NAWQA GW GW GW Sampling Sampling Kits Kits and and Accessories
Accessories
Accessories
Chapter R1 NAWQA GW Sampling Kits
Chapter R2 NAWQA Kit Accessories
Section S
Miscellaneous
Miscellaneous
Chapter S1 Thermometers⎯Digital, Hand-held
Chapter S2 Rain Gage⎯Tipping Bucket
Chapter S3 Samplers (ISCO)
Chapter S4 Electric Ground Testing Equipment
Chapter S5 Gaging Station Accessories
Chapter S6 Padlocks
Chapter S7 Signs, Stencils, and Decals
Chapter S8 Ice Chisels
Chapter S9 Personal Safety Equipment
Chapter S10 Altimeters and Barometers
Section T
System System Diagrams
Diagrams
Chapter T1 System Diagrams
Section U
Publications
Publications
Chapter U1 Manuals and Reports
Chapter U2 Technical Information Sheets
Chapter U3 Miscellaneous
Subject Index
Stock Number Index
vi (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

HIF Services
• Benefits of the HIF Rental Program
• HIF Lease-To-Own Program
• HIF Field Assistance
• HIF Quality Assurance
• HIF Repair Capabilities
HIF Services

HIF Services
SECTION CONTENTS
Benefits of the HIF Rental Program .......................................................................................2
HIF Lease-to-Own Program ..................................................................................................3
HIF Field Assistance .............................................................................................................4
HIF Quality Assurance ..........................................................................................................5
HIF Repair Capabilities .........................................................................................................6

Lisa Garcia, Testing Section
Jerry Gardner, Field Service Section
HIF Services
Jim Jelinski (left), Roy Johnson (right),
Engineering Section
Linda Carroll, Repair Section
1
HIF Services

HIF Services
Benefits of the
HIF Rental Program
• SMALL CAPITAL INVESTMENT Customers do not have to spend
a lot of up-front money to install instruments.
• HIF RENTAL PACKAGE Rentals from the HIF include repairs and
calibrations. If an instrument has problems, it can be returned to the
HIF for replacement at no additional cost.
• EQUIPMENT INSURANCE POLICY If an instrument is damaged by
lightning, floods, or other natural disasters, it can be returned to the
HIF for replacement at no additional cost.
• NEW INSTRUMENTS Customers can try new instruments without
having to purchase them. Older technology instruments can be
returned for the newer technology instruments.
• SHORT-TERM NEEDS Instruments can be obtained for only as
long as needed. In this way, costs are incurred for only as long as
necessary.
• QUALITY CONTROL HIF instruments must pass quality control
inspections/calibrations before they become part of the rental
program.
• VERY LOW RENTAL RATES HIF monthly rates are very low when
compared to industry rates.
• EASY TO ACQUIRE Using HIF-CSSII, customers can request
FED-EX delivery and, in nearly all cases, receive instruments the next
day.
• VARIETY OF EQUIPMENT AVAILABLE A wide variety of SDI-12
loggers, DCP's, water-quality monitors, pressure sensors, velocity
meters, accessories, and more are offered through the rental
program.
• RENT TO OWN When purchasing a rental item, partial rental credits
apply to the purchase price.
2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

HIF Lease-to-Own Program
The HIF offers Lease-to-Own Programs to fit the needs of our USGS
customers. Under this program, new equipment is purchased from the HIF
and ownership of the equipment transfers to the customer upon shipment.
Unlike the rental program, under the Lease-to-Own Program, the customer
is responsible for repairs and equipment losses. Payment for Lease-to-Own
equipment is made over a period of time.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • 1 (800) 382-0634 3
HIF Services

HIF Services
HIF Field Assistance
HIF engineers and technicians are always available to provide assistance to our customers. Their
wide variety of expertise with state-of-the art instrumentation and methodologies aids the field in
achieving their mission timely and effectively. Areas of the HIF’s Field Assistance include:
Applications Assistance--HIF offers information and suggestions for any need, large or small!
Save valuable time by calling the HIF to solve problems or help with new ideas, such as
• Establishing a new site
• Programming of electronic data loggers (EDL’s) and data collection platforms (DCP’s)
• Providing one-of-a-kind software and/or hardware interfaces for equipment
• Equipment suggestions and specifications
• Sizing of batteries and selection of proper recharging systems
• Suggestions for grounding and equipment protection
• Applying the latest technologies for particular applications
Real-Time Troubleshooting Assistance--HIF assistance is only a phone call away!
Take your cellular phone to that problem site. Call the HIF, and we’ll “walk you through”
some basic troubleshooting steps and offer suggestions for possible solutions to problems.
Site Visits--HIF assistance in person!
Allow a HIF representative to visit problem sites or give your staff a briefing on HIF
equipment, services and activities.
On-Site Training--HIF saves you $ on training costs!
Train your personnel on-site. Qualified HIF personnel serve as instructors in various
instrumentation courses offered by WRD. District or Field Offices can have a training
course “brought to them.” Courses available are
• Basic Electronics and Troubleshooting
• Campbell Scientific CR10 Data logger (Programming and Operation)
• Campbell Scientific BDR301/BDR320 Data loggers
• ESC80 Data logger
• Sutron 8200/8210 DCP’s
• Sutron 8400 ADR Replacement/Data logger
• Handar 560/570 DCP’s Handar 555 DCP’s
• Synergetics DCP’s
• Various sensors commonly used by WRD
4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

HIF Quality Assurance
Equipment Evaluation
HIF is continuously searching for more accurate, reliable, and less
expensive commercially available equipment for WRD data-collection
programs. Our efforts are to benefit you, our customer.
• When new products are found, they are thoroughly tested to
verify that they function properly and meet manufacturer’s or
WRD specifications.
• All evaluation tests are published in the WRD Instrument News
to inform you of our findings.
Each WRD employee is encouraged to suggest equipment for evaluation by
the Internet (wwwhif.er.usgs.gov/ofa/equip-info/equip-form.html), or by
contacting an ITAS Committee Representative (members are listed on their
home page: wwhif.er.usgs.gov/uo/icom/itas_members.html).
Quality Control Inspection
Equipment purchased from the HIF has “value added” because
• Every shipment is quality-control inspected to insure the
equipment functions properly and meets all specifications.
• When you purchase from the HIF, you know the equipment has
passed our inspection.
• You will have fewer problems with HIF-purchased equipment.
Fewer equipment failures will reduce both installation and
operation costs!
HIF Calibrations
Check us out: Our calibration rates are very low when compared to
commercial calibration laboratories! HIF has laboratory equipment and
procedures to calibrate
• Tipping-bucket rain gages,
• Submersible and Nonsubmersible pressure transducers, and
• Water-quality monitors
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • 1 (800) 382-0634 5
HIF Services

HIF Services
HIF Repair Capabilities
• Data Collection Platforms
Sutron 8200/8200A/8210
Handar 524/550A&B/560/570/555
Synergetics
• Ultrasonic Velocity Meters
ORE 7300/7510
• Shaft Encoders
Handar
Sutron
Synergetics
• 8400 Digital Data Recorders
• CMD’s, Regulator Chargers, Mini Servo’s, etc.
• Minimonitors
• Hydrolab Water Quality Monitors
• AA and Pygmy Current Meters
• Sounding Reels and J&H Power Drives
• Meter Pivot Resurfacing
• Conoflows
• Wading Rods
• Rain Gages
• Rate Meter, OTT Meter
• R100 Vibration Time Totalizers
• Cables, Specialty Devices
HIF also offers extended warranties on District-owned equipment. For a
low monthly fee, HIF will cover your repairs and maintenance for various
types of equipment. Call HIF for details.
6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

A Velocity Velocity Meters Meters
Meters
•= A1 Type AA Current Meter
•= A2 Price Pygmy Current Meter
•= A3 Ice Meter
•= A4 Ultrasonic Velocity Meter (UVM)
•= A5 Acoustic Doppler Current Meter
Section A
Velocity Meters
Velocity Meters

Velocity Meters
Exploded View of Price AA Current Meter...... A1.2
Price AA Current Meter ............................... A1.3
Contact Chamber ....................................... A1.3
Cap, Contact Chamber ................................ A1.3
Gear Assembly, Penta................................. A1.4
Binding Post Assembly, Single-Count............ A1.4
Binding Post Assembly, Penta-Count ............ A1.4
Bushing, Binding Post ................................. A1.4
Nut, Thumb ............................................... A1.5
Screw, Contact Chamber/Pivot .................... A1.5
Screw, Tailfin............................................. A1.5
Screw, Hanger ........................................... A1.5
Bucket Wheel, Metal................................... A1.6
Hub, Bucket Wheel, with Nuts ..................... A1.6
Nut, Hub ................................................... A1.6
Nut, Raising............................................... A1.6
Tailpiece Assembly, Standard ...................... A1.7
Balance-Weight Assembly ........................... A1.7
Pivot with Nut And Set Screw ...................... A1.7
Nut with Set Screw, Pivot............................ A1.7
Set Screw, Nut, Pivot.................................. A1.8
Price AA Shaft ............................................ A1.8
Yoke Alignment Tool................................... A1.8
Contact Chamber, Magnetic Head
Assembly ................................................ A1.9
Reed Switch with Spring ............................. A1.9
Shaft with Magnet ...................................... A1.9
Binding Post Assembly .............................. A1.10
Spring for Reed Switch ............................. A1.10
Oil, 1 Ounce, in Dispenser Bottle ............... A1.10
Carrying Case for Price AA Current
Meter ................................................... A1.11
Replacement Inserts................................. A1.11
Oil, 1/2 Pint, in Bottle ............................... A1.11
Exploded View of Price Pygmy Current
Meter ..................................................... A2.2
Section A
SECTION CONTENTS
Price Pygmy Current Meter ......................... A2.3
Round-Head Set Screw............................... A2.3
Upper-Bushing Bearing............................... A2.3
Binding Post Assembly ............................... A2.4
Cap, Contact Chamber ............................... A2.4
Price Pygmy Shaft...................................... A2.4
Pivot with Nut And Set Screw...................... A2.4
Pivot Nut with Set Screw ............................ A2.5
Slotted Set Screw ...................................... A2.5
Shipping Plug ............................................ A2.5
Hub Assembly with Bucket-Wheel Nut ......... A2.5
Hub Nut.................................................... A2.6
Bucket Wheel ............................................ A2.6
Slotted Set Screw ...................................... A2.6
Carrying Case............................................ A2.7
Yoke Alignment Tool .................................. A2.7
Ice Meter .................................................. A3.2
Ice Meter with Polymer Bucket Wheel.......... A3.3
Bucket Wheel, Polymer............................... A3.3
Transducer, Model No. 7652B ..................... A4.2
Cable, Transducer, RG108 .......................... A4.2
UVM, ORE Model No. 7300 ........................ A4.2
Cable, Power ............................................. A4.3
Seal, Hole, Hoffman A-5050, 1/2-inch......... A4.3
Connector, Strain Relief (Small)................... A4.3
Connector, Strain Relief (Large) .................. A4.3
Locking Nut, 1/2-inch ............................... A4.4
Sealing Ring, 1/2-inch ................................ A4.4
UVM , ORE Model 7510 .............................. A4.4
Transducer, ORE Model 7612...................... A4.5
AFFRA Flow Meter...................................... A4.5
AFFRA Transducer ..................................... A4.5
Sontek Acoustic Doppler Current Meter........ A5.2
Sontek Power Supply ................................. A5.2

A1 Ty Type Ty Ty pe AA AA Current Current Meter Meter
Meter
A1.1
Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter

Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter
Exploded view of Price AA Current Meter
A1.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

PRICE AA CURRENT
METER
1101001
The Price AA current meter is used to measure streamflow in rivers with velocities
greater than 0.2 feet per second and depths greater than 2.5 feet. Two contacts are
provided to make counting revolutions easier. The upper contact signals each
complete revolution of the meter, while the lower contact signals 5 complete
revolutions. The lower contact, called the penta counter, is used in extremely rapid
flow where it is impractical to count each revolution of the meter. All parts supplied
by the HIF for this meter are interchangeable without affecting the meter rating.
FYI: Save time and money on repairs for this item: Return to the HIF.
NOTE: FOR INFORMATION ON USE AND CARE OF CURRENT METERS, SEE TWRI “GENERAL
PROCEDURE FOR GAGING STREAMS” (BOOK 3, CHAPTER A6), “DISCHARGE
MEASUREMENTS AT GAGING STATIONS” (BOOK 3, CHAPTER A8), AND ”CALIBRATION OF
VERTICAL-AXIS TYPE CURRENT METERS” (BOOK 8, CHAPTER B2).
CONTACT CHAMBER
1101002
Contact chamber assembly, includes both upper and lower contact chambers and
cap. For Price AA current meter.
Cap, contact chamber. For Price AA current meter.
CAP, CONTACT
CHAMBER
1101005
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 A1.3
Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter

Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter
GEAR ASSEMBLY, PENTA
1101008
Gear assembly, penta (component of contact assembly). Allows for one count every
five revolutions of bucket wheel. For Price AA current meter.
BINDING POST
ASSEMBLY, SINGLE-
COUNT
1101012
Binding post assembly, single-count (component of contact assembly). For Price AA
current meter.
BINDING POST
ASSEMBLY, PENTA-COUNT
1101013
Binding post assembly, penta-count (component of contact assembly). For Price AA
current meter.
BUSHING, BINDING POST
1101014
Bushing, binding post. Plastic insulator bushing insulates catwhisker contact from
body of meter. For Price AA current meter.
A1.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

NUT, THUMB
1101015
Nut, thumb. Attaches lead wire to binding post on Price AA current meter.
SCREW, CONTACT
CHAMBER/PIVOT
1101021
Screw, contact chamber/pivot. Holds contact chamber in yoke or pivot in yoke on
Price AA current meter.
SCREW, TAILFIN
1101022
Screw, tailfin. Holds AA meter and Price pygmy meter to wading rod and holds
tailfin to Price AA current meter.
SCREW, HANGER
1101023
Screw, hanger. Holds Price AA current meter on weight hanger bar.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 A1.5
Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter

Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter
BUCKET WHEEL, METAL
1101024
Bucket wheel, metal. For Price AA current meter. (Date of manufacture and the
letter “s” for standard rating are stamped on top of the bucket wheel frame.)
HUB, BUCKET
WHEEL,
WITH NUTS
1101027
Hub, bucket wheel, with nuts (Stock Nos. 1101030 and 1101032). Holds bucket
wheel on Price AA current meter.
NUT, HUB
1101030
Nut, hub. Holds bucket wheel onto hub of Price AA current meter.
NUT, RAISING
1101032
Nut, raising. Raises bucket wheel up off pivot point on Price AA current meter.
A1.6 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

TAILPIECE ASSEMBLY,
STANDARD
1101033
Tailpiece assembly, standard. For Price AA current meter. Used to align meter with
streamflow.
BALANCE-WEIGHT
ASSEMBLY
1101049
Balance-weight assembly. Used to water balance the Price AA current meter with
tailfin assembly attached.
PIVOT WITH NUT AND
SET SCREW
1101053
Pivot with nut and set screw. For Price AA current meter.
FYI: A HIF-repairable stock item.
NUT WITH SET SCREW,
PIVOT
1101055
Nut with set screw, pivot. Holds pivot in adjustment. For Price AA current meter.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 A1.7
Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter

Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter
SET SCREW, NUT, PIVOT
1101056
Set screw, nut, pivot. Inserts into nut that holds pivot in adjustment, and locks nut
in place after final pivot adjustment. For Price AA current meter.
PRICE AA
SHAFT
1101057
Shaft. Aligns bucket wheel and makes contact with catwhiskers. For catwhisker-type
Price AA current meter.
YOKE ALIGNMENT TOOL
1101058
Yoke alignment tool. Used to check alignment of yoke on Price AA current meter.
A1.8 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

CONTACT CHAMBER,
MAGNETIC HEAD
ASSEMBLY
1101060
The magnetic head contact chamber, originally designed for use in high
conductivity, low-velocity flow, has been modified to allow its use over the entire
calibration range of the meter. The modified contact chambers are identified by the
letter “A” stamped on the top surface of the chamber. Users of the magnetic head
contact chamber who anticipate measuring velocities greater than 2.2 feet per
second should assure that the letter “A” appears on the top surface of the chamber
before beginning any measurements.
REED SWITCH WITH
SPRING
1101062
Reed switch with spring, magnetic head assembly. For Price AA current meter.
SHAFT WITH MAGNET
1101063
Shaft with magnet. Aligns bucket wheel and makes contact with reed switch in
magnetic head assembly. For Price AA current meter.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 A1.9
Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter

Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter
BINDING POST ASSEMBLY
1101064
Binding post assembly, magnetic head assembly. For Price AA current meter.
SPRING FOR REED
SWITCH
1101067
Spring for reed switch, magnetic head assembly. For Price AA current meter.
OIL, 1 OUNCE, IN
DISPENSER BOTTLE
1101069
Oil, 1 ounce, in dispenser bottle. For current meters.
A1.10 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

CARRYING CASE FOR
PRICE AA CURRENT
METER
1101075
The current meter carrying case is a molded, luggage-style, carrying case that
contains a foam insert to hold equipment. The insert is glued to the interior case
walls. The case has two latches, three hinges, and a handle. It can be shipped on
airlines as luggage. The case will hold two AA current meters, three Price pygmy
current meter cases, a small- and a medium-sized screwdriver, and an oil bottle in a
manner that provides protection from damage. Overall dimensions are: 21 inches
wide by 6-1/4 inches deep by 15 inches high. It weighs approximately 6 pounds
when empty.
REPLACEMENT
INSERTS
1101077
Inserts, top and bottom, replacement, for AA meter carrying case (Stock No.
1101075).
Oil, 1/2 pint, in bottle. For current meters.
OIL, 1/2 PINT, IN
BOTTLE
1101079
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 A1.11
Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter

Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter
Helpful, elpful,
Informative
nformative
Facts acts
A Benefit of the HIF Rental Program
SMALL CAPITAL INVESTMENT
Customers do not have to spend a lot of
up-front money to install instruments.
A1.12 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

A2 Price Price Pygmy Pygmy Current Current Meter
Meter
A2.1
Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter

Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter
Exploded view of Price Pygmy
Current Meter
A2.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

PRICE PYGMY
CURRENT METER
1103001
The Price pygmy meter is a two-fifths scale model of the Price AA Current Meter. It
has neither tailfins nor provisions for suspension from a cable. The Price pygmy
meter is designed to be used in conjunction with a wading rod (Stock No. 2101001)
in shallow waterways with velocities of 0.2-foot per second or greater. Each meter
is shipped in a protective plastic carrying case. All parts for this meter supplied by
the HIF are interchangeable without affecting the standard rating.
FYI: Save time and money by letting HIF’s expert technicians repair this stock
item.
NOTE: FOR INFORMATION ON USE AND CARE OF CURRENT METERS, SEE TWRI
"GENERAL PROCEDURE FOR GAGING STREAMS" (BOOK 3, CHAPTER A6), "DISCHARGE
MEASUREMENTS AT GAGING STATIONS" (BOOK 3, CHAPTER A8), AND "CALIBRATION
AND MAINTENANCE OF VERTICAL-AXIS TYPE CURRENT METERS" (BOOK 8, CHAPTER
B2).
ROUND-HEAD SET
SCREW
1103003
Round-head set screw. Holds pivot in yoke of Price pygmy current meter (screw for
yokes made prior to 1980).
UPPER-BUSHING
BEARING
1103005
Upper-bushing bearing. Holds shaft in alignment. For Price pygmy current meter.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 A2.3
Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter

Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter
BINDING POST ASSEMBLY
1103006
Binding post assembly. Catwhisker and insulator assembly. For Price pygmy current
meter.
CAP, CONTACT CHAMBER
1103011
Cap, contact chamber. For Price pygmy current meter.
PRICE PYGMY
SHAFT
1103012
Shaft. Aligns bucket wheel and makes contact with catwhisker. For Price pygmy
current meter.
PIVOT WITH NUT AND SET
SCREW
1103019
Pivot with nut and set screw. For Price pygmy current meter.
FYI: This stock item is repairable by the HIF.
A2.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

PIVOT NUT WITH SET
SCREW
1103020
Pivot nut with set screw. Used to adjust pivot to correct length, for Price pygmy
current meter.
SLOTTED SET SCREW
1103021
Slotted set screw. Inserts in pivot nut and locks nut in place at final pivot
adjustment. For Price pygmy current meter.
SHIPPING PLUG
1103022
Shipping plug. Replaces pivot during travel. For Price pygmy current meter.
HUB ASSEMBLY WITH
BUCKET-WHEEL NUT
1103023
Hub assembly with bucket-wheel nut and lower bearing. Holds bucket wheels in
place. For Price pygmy current meter.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 A2.5
Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter

Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter
HUB NUT
1103024
Hub nut. Attaches bucket-wheel assembly to hub assembly. For Price pygmy current
meter.
Bucket wheel. For Price pygmy current meter.
BUCKET WHEEL
1103025
SLOTTED SET SCREW
1103026
Slotted set screw. Holds pivot in yoke of Price pygmy current meter (screw for yokes
made after 1980).
A2.6 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

CARRYING CASE
1103027
Carrying case, black polymer, lined with convoluted foam with cutouts for Price
pygmy current meter, small screwdriver, and 2 pivots.
YOKE ALIGNMENT
TOOL
1103028
Yoke alignment tool. Used to check alignment of yoke. For Price pygmy current
meter.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 A2.7
Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter

Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter
Helpful, elpful,
Informative
nformative
nformative
Facts acts
Another Benefit of the HIF Rental Program
HIF RENTAL PACKAGE
Rentals from the HIF include repairs and
calibrations. If an instrument has problems, it can
be returned to the HIF for replacement at no
additional cost.
A2.8 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

A3 Ice Ice Meter
Meter
A3.1
Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic
Velocity Meter
Acoustic Doppler
Current Meter

Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter
ICE METER
1104001
The USGS Ice Meter is a variation of the Price AA current meter. The yoke has been
modified to eliminate the tailfin and shorten the overall length so that it will fit
through a 7-inch (18-centimeter) diameter ice hole. The distance from the front of
the bucket wheel to the back of the yoke is 6 inches (15 centimeters). [Meter is
assembled with a metal bucket wheel. For use in locations that have severe slush
ice flows, order Stock No. 1104002.] Each meter must be individually rated for the
specific suspension equipment with which it will be used.
The Ice Meter can be used with USGS ice rods that screw directly into the threaded
boss on the upper limb of the meter yoke. Folding weight hangers are available
which allow the use of a 30-pound or 50-pound Columbus-type sounding weight and
fit through an 8-inch (20-cm) ice hole.
A3.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

ICE METER WITH
POLYMER BUCKET
WHEEL
1104002
The USGS Ice Meter is a design variation of the AA Price-type current meter. The
yoke has been modified to eliminate the tailfin and shorten the overall unit so that it
will fit through a 7-inch (18-cm) ice hole. The distance from the front of the bucket
wheel to the back of the meter frame is 6 inches (15 cm). The meter is assembled
with the polymer bucket wheel for use in locations that have severe slush ice flows.
Studies have shown that the polymer bucket wheel sheds ice much more effectively
than the conventional metal bucket wheel. Each meter must be individually rated.
The meter can be used with the USGS ice rod, which screws directly into the
threaded boss on the upper limb of the meter yoke. A special folding weight hanger
is available that allows the use of a 30-pound or 50-pound standard Columbus-type
weight and fits through a standard 8-inch (20-cm) ice hole.
Bucket wheel, polymer. (For 1104002 only)
BUCKET WHEEL,
POLYMER
1104003
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 A3.3
Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter

Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter
Huge uge
Insurance nsurance
Feature eature eature
Another Benefit of the HIF Rental Program
EQUIPMENT INSURANCE POLICY
If an instrument is damaged by lightning, floods or
other natural disasters, it can be returned to the
HIF for replacement at no additional cost.
A3.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

A4 Ultrasonic Ultrasonic Velocity Velocity MMeter
M eter
(UVM)
(UVM)
A4.1
Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter

Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Ultrasonic Acoustic Velocity Doppler
Meter Current (UVM) Meter
TRANSDUCER,
MODEL NO. 7652B
1111021
Four-inch diameter transducer, Model No. 7652B, 200 kHz, active/passive-type. For
ORE Model No. 7300 UVM.
FYI: Save time and money on repairs for this item: Return to the HIF.
CABLE, TRANSDUCER,
RG108
1111022
Cable, transducer, RG108, hdpe-coated. Stocked in 1,000-foot rolls.
UVM, ORE MODEL
NO. 7300
1111023
The Ultrasonic Velocity Meter (UVM) 7300 is a battery-powered flowmeter designed
for measuring and reporting the average velocities of water flow along one or more
paths. The flowmeter utilizes acoustic transducers and the proven time-of-travel
method to measure these flow velocities. Measurements along any one path require
that a pair of transducers be mounted under the water at some distance apart.
Transducers are connected to the UVM 7300 by special RG-108 transducer cables,
and can be operated in either an active mode (long-path or high-noise application)
or a passive mode (short-path or low-noise application).
FYI: This stock item is repairable by HIF’s expert technicians.
A4.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

Cable, power. For ORE Model No. 7300 UVM.
CABLE, POWER
1111026
SEAL, HOLE, HOFFMAN
A-5050, 1/2-INCH
1111030
Seal, hole, Hoffman A-5050, 1/2-inch. Fills hole in ORE Model No. 7300 UVM.
CONNECTOR, STRAIN
RELIEF (SMALL)
1111031
Connector, strain relief, sized (0.125- to 0.275-inch with ½-inch hub), liquid-tight.
For small UVM transducer cables. Seal and nut not included.
CONNECTOR, STRAIN
RELIEF (LARGE)
1111032
Connector, strain relief, sized (0.250- to 0.400-inch with ½-inch hub), liquid-tight.
For large UVM transducer cables. Seal and nut not included.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 A4.3
Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter

Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Ultrasonic Acoustic Velocity Doppler
Meter Current (UVM) Meter
Locking nut, 1/2-inch, for watertight strain relief.
Sealing ring, 1/2-inch, for watertight strain relief.
LOCKING NUT,
1/2-INCH
1111035
SEALING RING,
1/2-INCH
1111036
UVM, ORE MODEL 7510
1111050
The Ultrasonic Velocity Meter (UVM) is a battery-powered flowmeter measuring and
reporting the average velocity of water flow along one or more paths. The
flowmeter utilizes acoustic transducers (Stock Nos. 1111021 and 1111055) and the
proven time-of-travel method to measure velocity. Measurements along any path
requires two transducers be mounted under the surface of the water a known
distance apart. Transducers are connected to the UVM by transducer cable (Stock
No. 1111022). The model 7510 may be used to collect stage data, operated only in
the passive mode, and contain a path length of no more than 500 feet.
FYI: Save time and money by letting HIF’s expert technicians repair this stock
item.
A4.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

TRANSDUCER,
ORE MODEL 7612
1111055
Transducer, ORE Model 7612 for use with ORE 7510GS UVM (Stock No. 1111050).
Supplied with 200 feet of fixed cable suitable for direct immersion. Operational
frequency of 200 kHz and path length of 20 to 500 feet.
FYI: A HIF-repairable stock item.
AFFRA FLOW METER
1112010
The Ultrasonic Velocity Meter (UVM) is a battery-powered flowmeter measuring and
reporting the average velocity of water flow along one or more paths. The
flowmeter utilizes acoustic transducers (Stock No. 1112050) and the proven time-oftravel
method to measure velocity. Measurements along any path require two
transducers be mounted under the surface of the water a known distance apart.
Model 200/2/12 may be used to collect stage data, operated only in the passive
mode, and contain a path length of no more than 1300 feet.
FYI: This stock item is repairable by HIF’s expert technicians.
AFFRA TRANSDUCER
1112050
Transducer for AFFRA Acoustic Flow Meter. Transducers are approximately 2 inches
in diameter and are supplied with 30 feet of cable.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 A4.5
Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter

Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Ultrasonic Acoustic Velocity Doppler
Meter Current (UVM) Meter
Helpful, elpful,
Inexpensive
nexpensive
Feature eature
Another Benefit of the HIF Rental Program
NEW INSTRUMENTS
Customers can try new instruments without having to
purchase them. Older technology instruments can be
returned for the newer technology instruments.
A4.6 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

A5 Acoustic Acoustic Acoustic Doppler Doppler Current
Current
Meter
Meter
A5.1
Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter

Type AA
Current Meter
Price Pygmy
Current Meter
Ice Meter
Ultrasonic Velocity
Meter
Acoustic Doppler
Current Meter
SONTEK ACOUSTIC
DOPPLER CURRENT
METER
1113010
Sontek Acoustic Doppler Current Meter (Model Argonaut-SL). Two axis, side-looking
acoustic Doppler current meter with 2 megabytes of internal memory. This meter is
designed to be mounted underwater on a vertical structure. It will measure flow from
0.5 meter (1.5 feet) to 15 meters (46 feet) from the sensor.
Meter includes carrying case, 10-meter (33 feet) communication/power cable, special
12-volt battery cable, and mounting plate with screws.
FYI: This stock item is repairable by HIF’s expert technicians.
SONTEK POWER SUPPLY
1113012
Optional power supply for the Sontek Acoustic Meter for use at sites with AC power
available. Included with the power supply is the power cord and power converter with
plug for the communication/power cable.
FYI: This stock item is repairable by the HIF.
A5.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

B Nonrecording Stage Gages
•= B1 Staff Gages, English and Metric
•= B2 Crest-Stage Gage
•= B3 Electric Tape Gage
•= B4 Wire-Weight Gage
Section B
Nonrecording Stage Gages

Cableway Anchor Bar
Cable Car Accessories
Cable Car, Sit Down
and Accessories Cable Car, Stand Up
Non Recording Stage Gages
SECTION CONTENTS
Staff Gage Section (English)........................................................................................ B1.2
Staff Gage Section (Metric) 1 meter long ..................................................................... B1.3
Numeral Plate For Metric Staff Gage ............................................................................ B1.4
Roundhead Wood Screw, No. 10 ................................................................................. B1.4
Crest-Stage Gage Bottom Fixture, 2-inch ..................................................................... B2.2
Crest-Stage Gage Top Cap, 2-inch............................................................................... B2.2
Crest-Stage Gage Bracket ........................................................................................... B2.3
Crest Gage Ground Cork, 1 pound ............................................................................... B2.3
Electric Tape Gage ..................................................................................................... B3.2
Brass Weight.............................................................................................................. B3.2
Meter ........................................................................................................................ B3.2
Stainless Steel Tape ................................................................................................... B3.3
Wire-Weight Gage Assembly ....................................................................................... B4.2
Weight, 5-Pound ........................................................................................................ B4.2
Brake......................................................................................................................... B4.2
Nicopress Sleeve (5/8-inch) ........................................................................................ B4.3
Cable, 0.045-inch, Replacement .................................................................................. B4.3
Counter ..................................................................................................................... B4.3
Counter Lever ............................................................................................................ B4.3
Internal Frame Bracket (Left-Hand)............................................................................. B4.4
Internal Frame Bracket (Right-Hand)........................................................................... B4.4
Index Wheel .............................................................................................................. B4.4
Drum and Index-Wheel Assembly................................................................................ B4.5
Ratchet Crank-Handle Assembly.................................................................................. B4.5
Checking Bar Assembly............................................................................................... B4.5
Retaining Sheave Guide Bar ........................................................................................ B4.6
Cable-Laying Sheave .................................................................................................. B4.6
Threaded Shaft .......................................................................................................... B4.6
Section B

B1 Staff Gages, English and
Metric
B1.1
Staff Gages,
English & Metric
Crest-Stage Gage Electric Tape Gage
Wire-Weight Gage

Staff Gages,
English & Metric
Crest-Stage Gage
Electric Tape Gage
Wire-Weight Gage
STAFF GAGE SECTION
(ENGLISH)
Staff gage sections, made of enamel-coated steel, are available in sections 4 inches wide, 3.38 feet
long, and graduated in 0.02-ft increments. Each section displays black numbers and markings on a
white background. Ten brass grommets, each ¼-inch in diameter and shaped to accept a No. 10
roundhead wood screw or a ¼-inch lag screw, are available to attach the section to a backing plate.
The middle set of grommets are elongated to allow the accurate spacing of adjoining sections.
Staff Gage Stock Staff Gage Stock
Section Number Section Number
0.00 – 3.32 1201001 50.96 – 54.32 1201016
3.36 – 6.72 1201002 54.36 – 57.72 1201017
6.76 – 10.12 1201003 57.76 – 61.12 1201018
10.16 – 13.52 1201004 61.16 – 64.52 1201019
13.56 – 16.92 1201005 64.56 – 67.92 1201020
16.96 – 20.32 1201006 67.96 – 71.32 1201021
20.36 – 23.72 1201007 71.36 – 74.72 1201022
23.76 – 27.12 1201008 74.76 – 78.12 1201023
27.16 – 30.52 1201009 78.16 – 81.52 1201024
30.56 – 33.92 1201010 81.56 – 84.92 1201025
33.96 – 37.32 1201011 84.96 – 88.32 1201026
37.36 – 40.72 1201012 88.36 – 91.72 1201027
40.76 – 44.12 1201013 91.76 – 95.12 1201028
44.16 – 47.52 1201014 95.16 – 98.52 1201029
47.56 – 50.92 1201015 98.56 – 99.92 1201030
B1.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

STAFF GAGE SECTION
(METRIC) 1 METER LONG
1201031
Metric staff gage sections, made of enamel-coated steel, are available in sections 4 inches wide, 1
meter (3.048 feet) long, and graduated in 0.01-meter increments. Each section displays black
numbers and markings on a white background. Ten brass grommets, each ¼-inch diameter and
shaped to accept a No. 10 roundhead wood screw or a ¼-inch lag screw, are available to attach the
section to a backing plate. The middle set of grommets are elongated to allow the accurate spacing
of adjoining sections.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 B1.3
Staff Gages,
English & Metric
Crest-Stage Gage Electric Tape Gage Wire-Weight Gage

Staff Gages,
English & Metric
Crest-Stage Gage
Electric Tape Gage
Wire-Weight Gage
NUMERAL PLATE FOR
METRIC STAFF GAGE
Numeral plates are made of enamel-coated steel. Each plate is 1-3/16 inches wide, 4-1/8 inches
high, and displays red numerals on a white background. Two elongated brass grommets, ¼-inch
diameter and shaped to accept a No. 10 roundhead wood screw or ¼-inch lag screw, allow for the
accurate placement of the numerals on the backing plate.
Numeral Stock Number
0 1201032
1 1201033
2 1201034
3 1201035
4 1201036
5 1201037
6 1201038
7 1201039
8 1201040
9 1201041
ROUNDHEAD WOOD
SCREW, NO. 10
1201042
No. 10 X 1-inch stainless steel, roundhead wood screw, 100 per box.
B1.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

B2 Crest-Stage Gage
B2.1
Staff Gages,
English & Metric
Crest-Stage Gage Electric Tape Gage
Wire-Weight Gage

Staff Gages,
English & Metric
Crest-Stage Gage
Electric Tape Gage
Wire-Weight Gage
CREST-STAGE GAGE
BOTTOM FIXTURE, 2-INCH
1202001
The bottom fixture is a 2-inch galvanized pipe cap with a post mounted in the middle of the cap to
serve as the base for the indicator rod. Each cap has six 3/16-inch holes drilled in the sides to allow
water to enter and exit the crest-stage gage. The group of 5 holes is designed to be pointed in the
direction of the expected flow. The single hole allows water to exit the gage.
CREST-STAGE GAGE
TOP CAP, 2-INCH
1202002
The top cap is a 2-inch galvanized pipe cap with a vent hole drilled in the side. The vent hole
prevents air pressure buildup as the pipe fills with water.
B2.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

CREST-STAGE GAGE
BRACKET
The galvanized steel bracket is used to support the gage and affix it to the mounting surface with
two 7/16-inch diameter holes. A minimum of 2 brackets is required to adequately support a creststage
gage.
Distance from Center of
Bracket Length Gage to Mounting Surface
(in inches) (in inches) Stock Number
6 4.5 1202003
8 6.5 1202004
10 8.5 1202005
Finely ground cork, for crest-stage gages, 1-pound container.
CREST GAGE GROUND
CORK, 1 POUND
1202006
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 B2.3
Staff Gages,
English & Metric
Crest-Stage Gage Electric Tape Gage Wire-Weight Gage

Staff Gages,
English & Metric
Crest-Stage Gage
Electric Tape Gage
Wire-Weight Gage
Helpful,
Important
Facts
Another Benefit of the HIF Rental Program
SHORT-TERM NEEDS
Instruments can be obtained for only as long as
needed. In this way, costs are incurred for only as long
as necessary.
B2.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

B3 Electric Tape Gage
B3.1
Staff Gages,
English & Metric
Crest-Stage Gage Electric Tape Gage
Wire-Weight Gage

Staff Gages,
English & Metric
Crest-Stage Gage
Electric Tape Gage
Wire-Weight Gage
ELECTRIC TAPE GAGE
1203001
The electric tape gage is used to determine the water surface elevation by lowering a weighted tape
until the weight contacts the water. Upon contact with the water, an electrical circuit is completed
causing the meter to deflect. The elevation of the water surface is then read from the tape. The
electric tape gage is sold without the tape (see Stock Nos. 1203004, 1203005, 1203006).
Brass weight. For the electric tape gage.
BRASS WEIGHT
1203002
METER
1203003
Replacement meters from the HIF warehouse are 0- to 15-volt meters. To install in the electric tape
gage, fit the volt meter into the cast frame of the electric tape gage.
B3.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

STAINLESS STEEL TAPE
Stainless steel tape available in various lengths for the electric tape gage
Tape Length Stock Number
25-foot 1203004
50-foot 1203005
100-foot 1203006
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 B3.3
Staff Gages,
English & Metric
Crest-Stage Gage Electric Tape Gage Wire-Weight Gage

Staff Gages,
English & Metric
Crest-Stage Gage
Electric Tape Gage
Wire-Weight Gage
Helpful,
Informative
Facts
Another Benefit of the HIF Rental Program
QUALITY CONTROL
HIF instruments must pass quality control
inspections/calibrations before they become part of the
rental program.
B3.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

B4 Wire-Weight Gage
B4.1
Staff Gages,
English & Metric
Crest-Stage Gage Electric Tape Gage
Wire-Weight Gage

Staff Gages,
English & Metric
Crest-Stage Gage
Electric Tape Gage
Wire-Weight Gage
WIRE-WEIGHT GAGE
ASSEMBLY
1204001
The wire-weight gage is used to determine water-surface elevation. It must be suspended over the
body of water to be measured. The gage is read manually by opening the protective case and
lowering the weight until it contacts the water surface. The rear (mounting) face of the gage is not
drilled so that local mounting requirements may be met. Mounting fixtures must be supplied by the
purchasing office. The weight and 90 feet of cable (maximum capacity of the drum) is supplied with
the gage.
WEIGHT, 5-POUND
1204002
Weight, 5-pound with Nicopress sleeve (5/8 inch) and connector bolt. For wire-weight gage.
Brake for wire-weight gage.
BRAKE
1204003
B4.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

Nicopress sleeve, 5/8-inch. For wire-weight gage.
NICOPRESS SLEEVE
(5/8-INCH)
1204005
CABLE, 0.045-INCH,
REPLACEMENT
1204006
Replacement cable, 0.045-inch diameter. For wire-weight gage. Priced per foot. Drum capacity is 90
feet. Breaking strength is approximately 300 pounds.
Counter, calibrated in feet. For wire-weight gage.
Counter lever. For wire-weight gage.
COUNTER
1204007
COUNTER LEVER
1204008
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 B4.3
Staff Gages,
English & Metric
Crest-Stage Gage
Electric Tape Gage Wire-Weight Gage

Staff Gages,
English & Metric
Crest-Stage Gage
Electric Tape Gage
Wire-Weight Gage
Internal frame bracket (left-hand). For wire-weight gage.
Internal frame bracket. (right-hand). For wire-weight gage.
INTERNAL FRAME BRACKET
(LEFT-HAND)
1204009
INTERNAL FRAME BRACKET
(RIGHT-HAND)
1204010
INDEX WHEEL
1204011
Wheel, index, graduated in tenths and hundredths of a foot. For wire-weight gage.
B4.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

DRUM AND INDEX-WHEEL
ASSEMBLY
1204012
Drum and index-wheel assembly. For wire-weight gage.
Ratchet crank-handle assembly. For wire-weight gage.
Checking bar assembly. For wire-weight gage.
RATCHET CRANK-
HANDLE ASSEMBLY
1204015
CHECKING BAR
ASSEMBLY
1204020
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 B4.5
Staff Gages,
English & Metric
Crest-Stage Gage
Electric Tape Gage Wire-Weight Gage

Staff Gages,
English & Metric
Crest-Stage Gage
Electric Tape Gage
Wire-Weight Gage
Guide bar, retaining sheave. For wire-weight gage.
Cable-laying sheave. For wire-weight gage.
RETAINING SHEAVE
GUIDE BAR
1204025
CABLE-LAYING SHEAVE
1204030
THREADED SHAFT
1204031
Threaded shaft guides cable-laying sheave. For wire-weight gage.
B4.6 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

C Pressure Sensors
•= C1 PS-2 Pressure Sensors
•= C2 Accubar Pressure Sensors (-3 and -5)
•= C3 H-350 Lite Pressure Sensor
•= C4 H-310 Non-Submersible Pressure Sensors,
DH-21 Downhole Logger/Sensor
•= C5 H-350 Pressure Measurement Systems
Section C
Pressure Sensors

Pressure Sensors
Section C
SECTION CONTENTS
Sight-Feed Assembly, with Fittings and By-Pass ............................................................... C1.2
Regulator, Pressure with CGA 580 Inlet ........................................................................... C1.2
H-355 Smart-Gas System................................................................................................ C1.2
PS-2 with LARC Kit and SDI-12 ....................................................................................... C1.3
PS-2 Enclosure without Transducer ................................................................................. C1.3
Pressure Line Connection Kit........................................................................................... C1.4
Ferrule Kit, 1/8-inch, Front/Back, Nylon ........................................................................... C1.4
Ferrule Kit, 1/8-inch, Front/Back, Stainless Steel .............................................................. C1.4
Nylon Tubing, 500-foot Roll ............................................................................................ C1.5
Knurled Nut, 1/8-inch Tube, Brass................................................................................... C1.5
Knurled Nut, 1/8-inch Tube, Stainless Steel ..................................................................... C1.5
1/4-inch Female Pipe to 1/8-inch Tube with Nylon Ferrule ................................................ C1.6
Accubar-3 (Sutron 5600-0125-3)..................................................................................... C2.2
Accubar-5 (Sutron 5600-0125-5)..................................................................................... C2.3
H-350 Lite ..................................................................................................................... C3.2
H-310-15 Submersible Pressure Transducer..................................................................... C4.2
H-310-15 Submersible Pressure Transducer with Sediment Guard ..................................... C4.3
H-310-30 Submersible Pressure Transducer..................................................................... C4.4
H-310-30 Submersible Pressure Transducer with Sediment Guard ..................................... C4.5
DH-21 Pressure Transducer/Data Logger ......................................................................... C4.6
Well Cap, 4-inch............................................................................................................. C4.7
Well Cap, 6-inch............................................................................................................. C4.7
Desiccant Pack for DH-21 ............................................................................................... C4.8
Desiccant Mini-Pack........................................................................................................ C4.8
Lithium Battery .............................................................................................................. C4.8
DH-21 External Power Cable ........................................................................................... C4.9
DAA H-350 Pressure Measurement System (0-15 PSI) ...................................................... C5.2
DAA H-350 Pressure Measurement System (0-30 PSI) ...................................................... C5.2
H-350 Logger With H-355 Gas System............................................................................. C5.2
H-350 Data Card, 1 MB Flash .......................................................................................... C5.3

C1 PS-2 Pressure Sensors
C1.1
PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System

PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System
SIGHT-FEED ASSEMBLY,
WITH FITTINGS AND
BY-PASS
1213101
Sight-feed assembly, with fittings and by-pass. Sight-feeds can be repaired at HIF. Call
HIF for cost.
FYI: Save time and money by letting HIF’s expert technicians repair this stock item.
REGULATOR, PRESSURE
WITH CGA 580 INLET
1213102
Regulator, pressure with CGA 580 inlet. For use with nitrogen tank and Conoflow sightfeed.
H-355 SMART-GAS SYSTEM
1213105
The Design Analysis H-355 Smart-Gas System is a self-contained gas-purge system, which
contains an internal compressor and tank to provide the constant flow of gas, needed to
measure water level. No external gas source, such as a nitrogen cylinder, is required for
operation of this system. May be used to replace the Conoflow sight feed.
C1.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

PS-2 WITH LARC KIT AND
SDI-12
1213122
PS-2 with LARC kit and SDI-12. Pressure connection kit included. Cables are not included.
The pressure sensor (PS-2) is a nonsubmersible pressure sensor that operates with a gaspurge
system to measure water levels. The unit consists of a Paroscientific transducer
housed in an environmental fiberglass enclosure. The PS-2 uses the SDI-12 digital
communication interface and can be connected to compatible SDI-12 data loggers and
DCP's.
The PS-2 operates over the range of 0 to 50 feet of water (0-22 PSIG) with an error of less
than +/-0.01 foot of water. The PS-2 is temperature compensated to operate over the
range of -40 to 60 degrees Celsius. The power requirement is 12-volts direct current. The
unit is equipped with a pressure-relief valve for protection from over pressures. The
fiberglass enclosure measures 8 by 10 by 6 inches high and has a hinged lid with quickrelease
latches for easy access to the transducer, plumbing, and wiring.
A second output (LARC kit) that emulates the output of a Handar 436A shaft encoder is
available. FYI: Save time and money on repairs for this item: Return to the HIF.
PS-2 enclosure without transducer.
To identify associated
components with
this item, a system diagram
appears
PS-2 ENCLOSURE WITHOUT
TRANSDUCER
1213125
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 C1.3
PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System

PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System
PRESSURE LINE
CONNECTION KIT
1213130
Pressure line connection kit. Connects Conoflow output fitting to pressure-input fitting.
Includes 5 feet of nylon tubing with an outside diameter of 0.125 inch and a wall thickness
of 0.026 inch, four sets of nylon ferrules, two stainless steel fitting nuts, and regulator
gage output fitting.
Ferrule kit, 1/8-inch, front/back, nylon. Sold in set of 10.
FERRULE KIT, 1/8-INCH,
FRONT/BACK, NYLON
1213133
FERRULE KIT, 1/8-INCH,
FRONT/BACK,
STAINLESS STEEL
1213134
Ferrule kit, 1/8-inch, front /back, stainless steel. Sold in set of 10.
C1.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

NYLON TUBING, 500-FOOT
ROLL
1213135
Nylon tubing, 500-foot roll, 0.125-inch outside diameter, wall thickness 0.026 inch; for
connecting pressure sensor systems to Conoflow sight feed assembly.
KNURLED NUT, 1/8-INCH
TUBE, BRASS
1213138
Knurled nut, 1/8-inch tube, brass. Used with pressure line kits for transducers. Five to a
set.
KNURLED NUT, 1/8-INCH
TUBE, STAINLESS STEEL
1213139
Knurled nut, 1/8-inch tube, stainless steel. Used with pressure line kits for transducers.
Five to a set.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 C1.5
PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System

PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System
1/4-INCH FEMALE PIPE TO
1/8-INCH TUBE WITH NYLON
FERRULE
1213140
One-fourth-inch female pipe to 1/8-inch tube with nylon ferrule, brass. Used with pressure
line kits for transducers.
C1.6 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

C2 Accubar Pressure Sensors
(-3 and -5)
C2.1
PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System

PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System
ACCUBAR-3
(SUTRON 5600-0125-3)
1214000
Accubar-3 (Sutron 5600-0125-3) pressure sensor stage measuring device with SDI-12.
Pressure line connection kit is included. Cables are not included. NOTICE: ORDER STOCK
NO. 1214010 IF NO STOCK IS AVAILABLE ON THIS STOCK NUMBER.
The Sutron Model 5600-0125-3 Accubar pressure sensor is a battery-powered,
nonsubmersible pressure sensor that operates with a gas-purge bubbler system to
measure water levels. The Accubar employs the SDI-12 communication interface and thus
can be connected to compatible SDI-12 data loggers and DCP's. The unit measures
pressure over the range of 0 to approximately 50 feet of water (0 to 22 pounds per square
inch gage) with a specified accuracy of +/-0.01 feet of water for ranges up to 10 feet and
+/-0.1 percent of reading for ranges exceeding 10 feet of water. The Accubar is
temperature compensated to operate over the range of -40 to 60 degrees Celsius.
The Accubar is housed in an aluminum enclosure that measures 3.14 by 4.92 by 2.24
inches and weighs 1.5 pounds. The unit is equipped with an internal pop-off valve for
protection from overpressure conditions. A pressure-line connection kit, including fittings
and tubing for connecting the Accubar to a gas-purge system, is provided with each unit.
The Accubar also features an RS-232 output that is accessible through a nine-pin
connector. Power and SDI-12 connections to the Accubar are made through a four-pin
military-style connector (same as on Handar 436B shaft encoder and PS-2 pressure
sensor).
FYI: A HIF-repairable stock item.
C2.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

ACCUBAR-5
(SUTRON 5600-0125-5)
1214010
Accubar-5 (Sutron 5600-0125-5) pressure sensor stage measuring device with SDI-12,
quadrature output (LARC output), and terminal strip. Pressure line connection kit included.
The Sutron Model 5600-0125-5 Accubar pressure sensor is a battery-powered,
nonsubmersible pressure sensor that operates with a gas-purge bubbler system to
measure water levels. The Accubar employs the SDI-12 communication interface and thus
can be connected to compatible SDI-12 data loggers and DCP’s. The unit measures
pressure over the range of 0 to approximately 50 feet of water (0 to 22 pounds per square
inch gage) with a specified accuracy of +/-0.01 feet of water for ranges up to 10 feet and
+/-0.1 percent of reading for ranges exceeding 10 feet of water. The Accubar is
temperature compensated to operate over the range of -40 to 60 degrees Celsius.
The Accubar is housed in an aluminum enclosure that measures 3.14 by 4.92 by 2.24
inches and weighs 1.5 pounds. The unit is equipped with an internal pop-off valve for
protection from overpressure conditions. A pressure line connection kit, including fittings
and tubing for connecting the Accubar to a gas-purge system, is provided with each unit.
The Accubar also features an RS-232 output that is accessible through a nine-pin
connector. Power and SDI-12 connections to the Accubar are made through a terminal
block connector. A quadrature output is also provided.
FYI: Save time and money on repairs for this item: Return to the HIF.
To identify
associated components
with this item,
a system diagram
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 C2.3
PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System

PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System
Helpful,
Informative
Fact
Another Benefit of the HIF Rental Program
VARIETY OF EQUIPMENT AVAILABLE
A wide variety of SDI-12 loggers, DCP's, water-quality
monitors, pressure sensors, velocity meters, accessories,
and more are offered through the rental program.
C2.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

C3 H-350 Lite Pressure Sensor
C3.1
PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System

PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System
H-350 LITE
1215000
Design Analysis Associates (DAA) H-350 LITE non-submersible pressure sensor stage
measuring device with SDI-12, quadrature output (LARC output) and terminal strip.
Pressure line connection kit is included.
The DAA H-350 LITE is a nonsubmersible pressure sensor that operates with a gas-purge
system to measure water levels. The H-350 LITE has an SDI-12 interface which allows
connection to compatible SDI-12 data loggers and DCP's. The unit operates over a range of
0-35 feet of water (0-15 psig) with a specified accuracy better than 0.02 percent of full
scale output (0.007 feet).
NOTE: IN 1996, HIF EXTENSIVELY TESTED 5 UNITS AND FOUND THEM TO MEET THE OSW
REQUIREMENTS FOR ACCURACY (SEE HIF EVALUATION MEMO DATED NOV. 21, 1996).
The H-350 LITE is temperature compensated to operate over the range of -40 to +60
degrees Celsius. The unit is equipped with a pressure-relief valve for protection from
overpressures.
The DAA H-350 LITE can be programmed using a computer with personal field computer
(PFC) communications software. The sensor has an external grounding post, a terminal
strip for battery and SDI-12 communication connections, a pressure input port, and a
pressure reference port. The H-350 LITE also has a round RS-232 port connector. The RS-
232 cable included allows the RS-232 port to be used for SDI-12 communication to a data
logger that has a standard 9-pin D-shell male connector serial port. A 6-foot, shielded SDI-
12 cable, with no connectors, is provided with the unit. The H-350 LITE corrosion-resistant
polycarbonate enclosure is designed to be water resistant but not waterproof. DAA
recommends that the unit be mounted vertically on the gage house wall to reduce the
possibility of damage to the circuit boards due to condensation. Proper earth grounding is a
must to ensure proper operation of the H-350 LITE.
The unit measures 4.63 by 4.75 by 4.375 inches and weighs 1.5 pounds. The pressure inlet
is a 1/8-inch-NPT female fitting. The required input voltage is 9.6-16.0 Vdc. The operating
current is 1-mA while inactive and the typical average current during measurement is
85 mA.
Also available is a second output (quadrature output) that emulates a Handar 436A
encoder output.
FYI: This stock item is repairable by the HIF.
To identify associated
components with this
item,
a system diagram
appears
C3.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

C4 H-310 Non-Submersible
Pressure Sensors,
DH-21 Downhole
Logger/Sensor
C4.1
PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System

PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System
H-310-15 SUBMERSIBLE
PRESSURE TRANSDUCER
1216010
Design Analysis Associates (DAA) H-310-15 submersible pressure transducer (0-15 psi)
with SDI-12. Comes with 50 feet of vented cable and 10 feet of hookup cable.
The DAA H-310 submersible pressure transducer is designed to monitor water levels in
wells or boreholes. It consists of an electronic housing (1.425 inch diameter by 12 inches
long) that contains the transducer element and electronic circuitry, a polyethylene vented
cable, and the H-305 Dry Air system to prevent moisture from entering the system. A onepound
cement ballast is provided to be hung from the bottom of the housing to stabilize
the position of the unit in the well casing or borehole.
This unit operates over a range of 0 to 40 degrees Celsius and has an SDI-12 signal
output. An external 12-volt power source is required. Units supplied from HIF come with
vented cable, a 1-pound ballast, a dry-air system, stainless steel drop cable and
attachment hooks, and spare desiccant packs.
FYI: Save time and money on repairs for this item: Return to the HIF.
CAUTION: THIS INSTRUMENT IS NOT INTENDED TO BE A MANOMETER
REPLACEMENT.
Specifications:
Accuracy: Manufacturer specified accuracy is less than or equal to 0.02% of full
scale output over temperature range referenced to a straight line from 0 psi to
maximum pressure. Refer to HIF test report dated March 26, 1996.
Pressure Range: 0-15 psi (0 to 34.60 feet)
Temperature Range: 0 to 40 degrees C
Output: SDI-12
Power: External 9.6- to 16-Vdc, 1 mA in sleep mode, 50 mA in active mode (measuring)
Size: 1.425 inches diameter by 12 inches long
Applications:
Water-level monitoring in wells or boreholes only
C4.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

H-310-15 SUBMERSIBLE
PRESSURE TRANSDUCER
WITH SEDIMENT GUARD
1216013
Design Analysis Associates (DAA) H-310-15 submersible pressure transducer (0-15 psi)
with sediment guard installed and SDI-12. Comes with 50 feet of vented cable and 10 feet
of hookup cable.
The DAA H-310 submersible pressure transducer is designed to monitor water levels in
wells or boreholes. It consists of an electronic housing (1.675 inch diameter by 12 inches
long) that contains the transducer element, electronic circuitry, and sediment guard, a
polyethylene vented cable, and the H-305 Dry Air system to prevent moisture from
entering the system. A one-pound cement ballast is provided to be hung from the bottom
of the housing to stabilize the position of the unit in the well casing or borehole.
This unit operates over a range of 0 to 40 degrees Celsius and has an SDI-12 signal
output. An external 12-volt power source is required. Units supplied from HIF come with
vented cable, a 1 pound ballast, a dry-air system, stainless steel drop cable and
attachment hooks, and spare desiccant packs.
FYI: A HIF-repairable stock item.
CAUTION: THIS INSTRUMENT IS NOT INTENDED TO BE A MANOMETER
REPLACEMENT.
Specifications:
Accuracy: Manufacturer specified accuracy is less than or equal to 0.02% of full scale
output over temperature range referenced to a straight line from 0 psi to maximum
pressure. Refer to HIF test report dated March 26, 1996.
Pressure Range: 0-15 psi (0 to 34.60 feet)
Temperature Range: 0 to 40 degrees C
Output: SDI-12
Power: External 9.6- to 16-Vdc, 1 mA in sleep mode, 50 mA in active mode (measuring)
Size: 1.425 inches diameter by 12 inches long
Applications:
Water-level monitoring in wells, boreholes, or streams
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 C4.3
PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System

PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System
H-310-30 SUBMERSIBLE
PRESSURE TRANSDUCER
1216020
Design Analysis Associates (DAA) H-310-30 submersible pressure transducer (0-30 psi)
with SDI-12. Comes with 100 feet of vented cable and 10 feet of hookup cable.
The DAA H-310 Submersible Pressure Transducer is designed to monitor water levels in
wells or boreholes. It consists of an electronic housing (1.425-inch diameter by 12 inches
long) that contains the transducer element and electronic circuitry, a polyethylene vented
cable, and the H-305 Dry Air system to prevent moisture from entering the system. A 1pound
cement ballast is provided to be hung from the bottom of the housing to stabilize
the position of the unit in the well casing or borehole.
This unit operates over a range of 0 to 40 degrees Celsius and has an SDI-12 signal
output. An external 12-volt power source is required. Units supplied from HIF come with
vented cable, a 1-pound ballast, a dry-air system, stainless steel drop cable and
attachment hooks, and spare desiccant packs.
FYI: This stock item is repairable by HIF’s expert technicians.
CAUTION: THIS INSTRUMENT IS NOT INTENDED TO BE A MANOMETER
REPLACEMENT.
Specifications:
Accuracy: Manufacturer specified accuracy is less than or equal to 0.02% of full
scale output over temperature range referenced to a straight line from 0 psi to
maximum pressure. Refer to HIF test report dated March 26, 1996.
Pressure Range: 0-30 psi (0 to 69 feet)
Temperature Range: 0 to 40 degrees Celsius
Output: SDI-12
Power: External 9.6 to 16 Vdc, 1 mA in sleep mode, 50 mA in active mode (measuring)
Size: 1.425 inches diameter by 12 inches long
Applications:
Water level monitoring in wells or boreholes only
C4.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

H-310-30 SUBMERSIBLE
PRESSURE TRANSDUCER
WITH SEDIMENT GUARD
1216023
Design Analysis Associates (DAA) H-310-30 submersible pressure transducer (0-30 psi)
with sediment guard installed and SDI-12. Comes with 100 feet of vented cable and 10
feet of hookup cable.
The DAA H-310 submersible pressure transducer is designed to monitor water levels in
wells or boreholes. It consists of an electronic housing (1.675-inch diameter by 12 inches
long) that contains the transducer element, electronic circuitry, and sediment guard, a
polyethylene vented cable, and the H-305 Dry Air system to prevent moisture from
entering the system. A 1-pound cement ballast is provided to be hung from the bottom of
the housing to stabilize the position of the unit in the well casing or borehole.
This unit operates over a range of 0 to 40 degrees Celsius and has an SDI-12 signal
output. An external 12-volt power source is required. Units supplied from HIF come with
vented cable, a 1-pound ballast, a dry-air system, stainless steel drop cable and
attachment hooks, and spare desiccant packs.
FYI: Save time and money by letting HIF’s expert technicians repair this stock item.
CAUTION: THIS INSTRUMENT IS NOT INTENDED TO BE A MANOMETER
REPLACEMENT.
Specifications:
Accuracy: Manufacturer specified accuracy is less than or equal to 0.02% of full scale
output over temperature range referenced to a straight line from 0 psi to maximum
pressure. Refer to HIF test report dated March 26, 1996.
Pressure Range: 0-15 psi (0 to 34.60 feet)
Temperature Range: 0 to 40 degrees Celsius
Output: SDI-12
Power: External 9.6 to 16 Vdc, 1 mA in sleep mode, 50 mA in active mode (measuring)
Size: 1.425 inches diameter by 12 inches long
Applications:
Water level monitoring in wells, boreholes, or streams
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 C4.5
PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System

PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System
DH-21 PRESSURE
TRANSDUCER/DATA LOGGER
1216050
Design Analysis Associates (DAA) Model DH-21 Submersible Pressure Transducer (0-15 psi)
and Data Logger. Includes 100 feet of vented cable, sediment guard, and 10 feet of
hookup cable.
The DAA DH-21 is the Model H-310 submersible water-level sensor that is combined with a
data logger and software for the setup, for data retrieval, and analysis. The DH-21
measures water level and internal temperature. The system is designed to fit in a 2-inch
borehole or well casing. The 1.675-inch diameter by 12-inch long submersible sensor is
permanently connected to the surface mounting enclosure by a 10-foot long, 1/4-inch
diameter, polyethylene vented, shielded three-wire cable. The unit comes with 100 feet of
vented cable. The pressure port is a replaceable stainless steel screen with a 149-micron
filter. The operating temperature range (nonfreezing) is 0 to 50 degrees Celsius.
The surface-mounting enclosure contains two replaceable, lithium, 3.6-volt batteries, a dry
air system, nonvolatile flash memory, and an RS-232 communications interface. The 7.2volt,
13.5 amp hour, D-cell lithium battery pack, used in the DH-21 but is not included, will
last 3 years, typically, at a logging interval of 15 minutes. As an alternate power source,
an external 6- to 15-volt power supply can be used.
The dry air system, with desiccant, helps prevent moisture from condensing in the vent
tube. This helps prevent errors in sensor measurements caused by an obstructed
reference to atmospheric pressure.
The date, time, level, temperature, and battery voltage are recorded in nonvolatile flash
memory. User notes can be entered into the record when defining the system data
collection parameters. The Zero Offset command allows the user to set offset to zero,
either at zero pressure or at a datum or reference point. Memory storage capacity is 128
kilobytes and will accept 43,688 data points. At a recording interval of 1 hour, the memory
will hold 455 days of record.
The RS-232 communications interface can be connected to a laptop computer or other field
data retrieval devices. The IBM-compatible DH-21 software is used to initialize, configure,
and retrieve data from the Model DH-21. FYI: This stock item is repairable by the HIF.
Specifications:
Power Supply: 2 Lithium cells at 3.6 volts each (user replaceable) or alternate external
sources ranging from 6 volts to 15 volts.
Material: Noncompressible and noncorrosive engineering plastics with polyethylene vent
tubing.
(Continued on page C4.7)
(DH-21 Pressure Transducer/Data Logger Continued)
C4.6 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

Size: 1.675 inches maximum diameter by 12 inches long. Designed to go in 2 inch or
larger well bores.
Accuracy: Pressure--Better than +/- 0.03 percent of full scale output over temperature
range referenced to a straight line stretched from zero psi to maximum pressure.
Internal Temperature: +/- 1 degree Celsius over temperature range.
Linearity: Less than 0.02 percent deviation from a straight line referenced to end points.
Pressure Range: 0 to 15 psi, 0 to 34.60 feet depth, +/-0.01 feet accuracy
Stored data is extracted by an RS-232 connection at 9600 baud, 8-bit with no parity, 1 stop
bit.
Nonvolatile Flash Memory: 128K bytes, 43,688 data point typical for 128K bytes.
WELL CAP, 4-INCH
1216052
Design Analysis DH-21-4, 4-inch diameter well cap. For use when installing a DH-21 into a
4-inch diameter well.
WELL CAP, 6-INCH
1216054
Design Analysis DH-21-6, 6-inch diameter well cap. For use when installing a DH-21 into a
6-inch diameter well.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 C4.7
PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System

PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System
DESICCANT PACK FOR
DH-21
1216055
Desiccant pack finite filter for use with DH-21 Pressure Transducer (Stock No. 1216050).
Desiccant pack needs to be replaced when color changes from blue to pink.
Desiccant mini-packs. Five included per order.
DESICCANT MINI-PACK
1216056
LITHIUM BATTERY
1216059
Battery, Lithium, for use with DH-21 Submersible Pressure Transducer. WARNING: DO
NOT SHIP THIS BATTERY BY A COMMERCIAL CARRIER UNLESS YOU HAVE BEEN CERTIFIED TO DO
SO. This battery, because it contains .009 Kg of lithium, is considered a hazardous material
and is subject to special Department of Transportation (DOT) shipping considerations. HIF
has been trained and certified to ship this material.
IF YOU HAVE A PROBLEM WITH THE BATTERY, PLEASE CALL HIF. DO NOT SHIP
IT BACK TO HIF.
C4.8 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

DH-21 external power cable.
DH-21 EXTERNAL POWER
CABLE
1216060
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 C4.9
PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System

PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System
Helpful,
Immeasurable
Feature
A Benefit of the HIF QC Program
TESTING OF NEW EQUIPMENT
10% of all new equipment received from vendors is
tested for specification compliance
C4.10 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

C5 H-350 Pressure Measurement
Systems
C5.1
PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System

PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System
DAA H-350 PRESSURE
MEASUREMENT SYSTEM
(0-15 PSI)
1221000
DAA H-350, 0-15 PSI, pressure measurement system (SDI-12). Includes integral data
logger, non-submersible pressure sensor, and pop-off valve. One data card is supplied with
rental unit. Pressure line connection kit is included.
FYI: Save time and money by letting HIF’s expert technicians repair this stock item.
DAA H-350 PRESSURE
MEASUREMENT SYSTEM
(0-30 PSI)
1221005
DAA H-350, 0-30 PSI, pressure measurement system (SDI-12) with extended temperature.
Includes integral data logger, non-submersible pressure sensor and safety pop-off valve.
One data card is supplied with rental unit. Pressure line connection kit is included.
FYI: This stock item is repairable by HIF’s expert technicians.
H-350 LOGGER WITH
H-355 GAS SYSTEM
1221012
DAA H-350, 0-30 PSI, with H-355 Smart Gas System. Includes 1 MB flash ROM card, air dryer,
and instrument mounting board. FYI: A HIF-repairable stock item.
C5.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

H-350 PCMCIA data card, 1 MB flash memory, DAA
H-350 DATA CARD, 1 MB
FLASH
1221050
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 C5.3
PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System

PS-2 Pressure
Sensors
Accubar Pressure
Sensors
H-350 Lite
Pressure Sensor
H-310 Non-Sub PS
DH-21 Downhole Logger
H-350 Pressure
Measurement System
Heightened
Instrument
Focus
Another Benefit of the HIF Repair Program
VERSATILE
Ability to repair over 50 different types of
equipment
C5.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

D Tagline Equipment, Tapes,
and Accessories
•= D1 Columbus Tagline Reel
•= D2 Plastic Tagline Reel
•= D3 Lee Au Tagline Reel
•= D4 Boat Tagline Reel
•= D5 Taglines and Accessories
•= D6 Tape
•= D7 Lee Au Handline
Section D
Tagline Equipment, Tapes, and Accessories

Tagline Equipment, Tapes, and Accessories
Columbus Tagline Reel with
Tagline ............................................... D1.2
Exploded View of Plastic Tagline Reel ....... D2.2
Plastic Tagline Reel With 400-ft Kevlar
Tagline ............................................... D2.3
Plastic Tagline Reel without Tagline.......... D2.3
Cover .................................................... D2.3
Cover Holding Screw............................... D2.4
Shaft Bearing ......................................... D2.4
Crank Assembly...................................... D2.4
Crank Handle ......................................... D2.4
Crank Handle Pin.................................... D2.4
Crank and Brake Holder Screw................. D2.5
Crank Lock Washer................................. D2.5
Spring Brake Curved Washer ................... D2.5
Brake Wing Nut...................................... D2.5
Brake Washer No. 1................................ D2.5
Brake Washer No. 2................................ D2.6
Hubspacer Flat Washer ........................... D2.6
Lock Assembly ....................................... D2.6
Lock Handle........................................... D2.6
Locking Pin ............................................ D2.6
Lock Roll Pin, Stainless Steel.................... D2.7
Stand Bolt.............................................. D2.7
Stand Lock Washer................................. D2.7
Stand And Lock Screw ............................ D2.7
Stand Wing Nut...................................... D2.7
Housing with Insert ................................ D2.8
Spool with Insert.................................... D2.8
Spring Lock............................................ D2.8
Section D
SECTION CONTENTS
Lee Au Tagline Reel with 500 ft Tagline.... D3.2
Lee Au Tagline Reel without Tagline......... D3.2
Removable Hub...................................... D3.3
Handle for Lee Au Tagline Reel................ D3.3
Spindle Screws For Removable Hub ......... D3.3
Light-Duty Boat Tagline Reel ................... D4.2
Handle for Heavy-Duty Boat Tagline Reel . D4.2
Handle for Light Duty Tagline Reel........... D4.2
Standard-Duty Boat Tagline Reel ............. D4.3
Steel Tagline.......................................... D5.2
Galvanized Steel Tagline, Special Order .... D5.2
Tagline Termination Kit........................... D5.3
Tagline Termination Kit for
1/16-inch Kevlar Tagline....................... D5.3
Kevlar Wading Tagline ............................ D5.4
Kevlar Tagline Cleaner and Rewaxer......... D5.4
Kevlar Floating Boat Tagline, 0.172-inch ... D5.5
Heat-Shrink Tubing for 1/16-inch Kevlar
Cable.................................................. D5.5
Sliding Kleine Grip .................................. D5.6
Sliding Kleine Grip, with Steel Cable ......... D5.6
Woven Cloth Tape.................................. D6.2
Carbon Steel Tape.................................. D6.2
Nubian Steel Tape .................................. D6.3
Refill Tape ............................................. D6.3
Stainless Steel Tape................................ D6.4
Empty Reel ............................................ D6.4
Tape Weight .......................................... D6.4
Lee Au Handline..................................... D7.2

D1 Columbus Tagline Reel
D1.1
Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline

Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline
Taglines &
Accessories
Tape
Lee Au
Handline
COLUMBUS TAGLINE REEL
WITH TAGLINE
1301001
Tagline reel contains 300 feet of 1/32-inch brass-beaded steel tagline.
Standard markings are:
Number of Tags Interval (Feet) Arrangement or Station
1 2 2 to 50
1 5 50 to 150
1 10 150 to end
2 10, 20, 30, 40, 50
150, 250, 350, 450
3 100, 200, 300, 400, 500
Special order taglines are available. Call HIF for information.
D1.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

D2 Plastic Tagline Reel
D2.1
Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline

Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline
Exploded view of Plastic Tagline Reel
D2.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

PLASTIC TAGLINE REEL WITH
400-FT KEVLAR TAGLINE
1302004
High-impact plastic tagline reel includes a handle through which a rod (not included)
may be inserted to support the reel while in use, a variable drag brake to prevent the
cable from spooling too rapidly from the reel, and a lock-down bolt to allow the cable to
be pulled taut. The Kevlar tagline has painted marks rather than the beads used on steel
taglines and is waxed to resist abrasion. Standard markings are: one mark every 2 feet,
two marks every 10 feet, three marks every 100 feet with flags.
Cover. For wading tagline reel.
PLASTIC TAGLINE REEL
WITHOUT TAGLINE
1302005
COVER
1302012
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 D2.3
Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline

Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline
Cover holding screw. For wading tagline reel.
Shaft bearing. For wading tagline reel.
COVER HOLDING SCREW
1302013
SHAFT BEARING
1302014
CRANK ASSEMBLY
(INCLUDES CRANK HANDLE
AND PIN)
1302015
Crank assembly (includes crank handle and pin). For wading tagline reel.
Crank handle. For wading tagline reel.
Crank handle pin. For wading tagline reel.
CRANK HANDLE
1302016
CRANK HANDLE PIN
1302017
D2.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

Crank and brake holder screw. For wading tagline reel.
Crank lock washer. For wading tagline reel.
Spring brake curved washer. For wading tagline reel.
Brake wing nut. For wading tagline reel.
Brake washer no. 1. For wading tagline reel.
CRANK AND BRAKE HOLDER
SCREW
1302018
CRANK LOCK WASHER
1302019
SPRING BRAKE
CURVED WASHER
1302020
BRAKE WING NUT
1302021
BRAKE WASHER NO. 1
1302022
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 D2.5
Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline

Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline
Brake washer no. 2. For wading tagline reel.
Hubspacer flat washer. For wading tagline reel.
BRAKE WASHER NO. 2
1302023
HUBSPACER FLAT WASHER
1302024
LOCK ASSEMBLY
1302025
Lock assembly (includes lock handle, locking pin, roll pins, lock washer, screw, and
spring). For wading tagline reel.
Lock handle. For wading tagline reel.
Locking pin. For wading tagline reel.
LOCK HANDLE
1302026
LOCKING PIN
1302027
D2.6 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

Lock roll pin (stainless steel). For wading tagline reel.
LOCK ROLL PIN,
STAINLESS STEEL
Diameter (inches) Length (inches) Stock Number
.125 .75 1302028
.125 1 1302029
Stand bolt. For wading tagline reel.
Stand lock washer. For wading tagline reel.
Stand and lock screw. For wading tagline reel.
Stand wing nut. For wading tagline reel.
STAND BOLT
1302030
STAND LOCK WASHER
1302031
STAND AND LOCK SCREW
1302032
STAND WING NUT
1302033
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 D2.7
Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline

Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline
Housing with insert. For wading tagline reel.
Spool with insert. For wading tagline reel.
Spring lock. For wading tagline reel.
HOUSING WITH INSERT
1302034
SPOOL WITH INSERT
1302035
SPRING LOCK
1302036
D2.8 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

D3 Lee Au Tagline Reel
D3.1
Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline

Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline
LEE AU TAGLINE REEL WITH
500 FOOT TAGLINE
1303002
A cast-aluminum reel with two brass handles, mounted 180 degrees apart on the
outside, for winding up the reel. An optional hub (Stock No. 1303004) attaches to the
center of the reel. When the optional hub is used, one handle is moved from the outside
of the reel to the hub and used as a rotating support handle. Reel contains 500 feet of
1/16-inch beaded steel tagline.
LEE AU TAGLINE REEL
WITHOUT TAGLINE
1303003
D3.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

REMOVABLE HUB
1303004
Hub attaches to the center of the Lee Au tagline reel to allow the reel to spin freely.
HANDLE FOR LEE AU TAGLINE
REEL
1303005
SPINDLE SCREWS FOR
REMOVABLE HUB
1303006
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 D3.3
Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline

Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline
Huge
Inner
Feature
Another Benefit of the HIF QC
Program
ELECTRONIC REPAIRS
10% of all electronic repairs are tested
D3.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

D4 Boat Tagline Reel
D4.1
Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline

Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline
LIGHT-DUTY BOAT
TAGLINE REEL
1304002
Reel, made of galvanized mild steel, has a brake assembly, a spring-loaded pin lock, a
removable handle, and is designed to be skid mounted. The reel will accept 3,000 feet
of floating or sinking Kevlar boat tagline (not included, see Stock No. 1307016 for
tagline.)
HANDLE FOR HEAVY-DUTY
BOAT TAGLINE REEL
1304003
HANDLE FOR LIGHT-DUTY
TAGLINE REEL
1304004
D4.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

STANDARD-DUTY BOAT
TAGLINE REEL
1305001
The standard-duty boat tagline reel is made of a rod frame and contains a handle for
spooling cable on and off the reel. It does not have a brake. Reel is designed to be
mounted horizontally (on one side) and is equipped with a bolt and small plate to mount
it to the cross boom of the boat outfit. The capacity of the reel is 1500 feet of 1/8-inch
steel tagline (Stock No. 1307006) or 900 feet of 3/16-inch Kevlar boat tagline (Stock No.
1307016.)
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 D4.3
Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline

Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline
Hot
Incorporated
Feature!
Another Benefit of the HIF QC Program
MECHANICAL REPAIRS
100% of all mechanical repairs are tested
D4.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

D5 Taglines and
Accessories
D5.1
Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline

Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline
Brass-beaded galvanized steel tagline on plastic spool.
STEEL TAGLINE
Diameter (inches) Length (feet) Stock Number
1/32 300 1307001
1/16 500 1307003
GALVANIZED STEEL TAGLINE,
SPECIAL ORDER
1307006
Specify size (1/32-, 1/16-, or 1/8-inch), length, beading. Call HIF for pricing.
Standard beading sequence for cable:
One bead, every 2 feet, for the first 50 feet.
Two beads, 1 inch apart, every 10-foot mark for the first 50 feet.
One bead, every 5 feet, for the next 100 feet.
One bead, every 10 feet, from the 150-foot mark to the end of tagline.
Two beads, 1 inch apart, every 50-foot mark.
Three beads, 1 inch apart, at every 100-foot mark.
If you require other than standard beading, please specify when ordering. Approximate
delivery time is 2 weeks.
D5.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

Tagline Size (inches) Stock Number
1/32 1307008
1/16 1307009
1/8 1307010
TAGLINE TERMINATION KIT
TAGLINE TERMINATION KIT
FOR 1/16-INCH KEVLAR
TAGLINE
1307011
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 D5.3
Columbus Plastic
Lee Au
Boat Tagline Taglines &
Tagline Reel Tagline Reel
Tagline Reel
Reel
Accessories
Tape
Lee Au
Handline

Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline
Length (feet) Stock Number
400 1307014
500 1307018
600 1307019
KEVLAR WADING TAGLINE
Standard markings are: one mark every 2 feet, two marks every 10 feet, three marks
every 100 feet with flags.
KEVLAR TAGLINE CLEANER
AND REWAXER
1307015
Kevlar tagline cleaner and rewaxer for 0.065- and 0.172-inch diameters.
D5.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

KEVLAR FLOATING BOAT
TAGLINE, 0.172-INCH
1307016
Kevlar floating boat tagline, 0.172-inch (+/-0.004 inch) diameter. Marked in feet.
Standard Marking for this Tagline:
1 mark every 10 feet
2 marks every 50 feet
3 marks every 100 feet
If your requirements call for markings other than the standard ones, call the HIF for
custom tagline pricing.
HEAT-SHRINK TUBING FOR
1/16-INCH KEVLAR CABLE
1307017
Heat-shrink tubing for 1/16-inch Kevlar cable. May be used for cable marking and
remaking snap/knot terminations. Each package contains 12 pieces of tubing 3 inches
long.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 D5.5
Columbus Plastic
Lee Au
Boat Tagline Taglines &
Tagline Reel Tagline Reel
Tagline Reel
Reel
Accessories
Tape
Lee Au
Handline

Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline
Used to tension Kevlar boat tagline.
SLIDING KLEINE GRIP
1307022
SLIDING KLEINE GRIP, WITH
STEEL CABLE
1307023
Grip, with snap and 9-foot steel cable used to attach boat tagline to shore opposite the
reel. For Kevlar boat tagline. Used at tree end.
D5.6 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

D6 Tape
D6.1
Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline

Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline
WOVEN CLOTH TAPE
1308000
Woven cloth tape, 50 feet long, 5/8-inch wide, 0.020-inch thick in vinyl covered case
with a hideaway handle for rewinding. Marked in feet, tenths and hundredths of a foot.
CAUTION: THIS TAPE SHOULD BE USED ONLY FOR MEASUREMENTS NOT
REQUIRING ACCURACIES GREATER THAN +/-0.1 FOOT
CARBON STEEL TAPE
1309000
Carbon steel tape, 50 feet long, 3/8-inch wide, in a vinyl covered case with a hideaway
handle for rewinding. Marked in feet, tenths, and hundredths of a foot.
D6.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

NUBIAN STEEL TAPE
Black steel tape is ¼-inch wide, 0.020-inch thick, and is marked in feet, tenths, and
hundredths of a foot. Tapes are either shipped on a shipping spool or on a reel with a
handle and crank (for rewinding the tape), leather straps (for use when the tape is
removed from the reel), and a 6-inch calibration ruler.
Tape
Length
(in feet)
Shipped On
Reel Shipping Spool
Stock
Number
100 X 1309001
100 X 1309006
200 X 1309002
200 X 1309007
300 X 1309003
300 X 1309008
500** X 1309004
500** X 1309009
**500-foot tapes are graduated in feet, tenths, and
hundredths of a foot for the first 30 feet of the tape.
The remaining tape is graduated only in feet.
REFILL TAPE
1309005
Refill tape made of carbon steel, 50 feet long, 3/8-inch wide, marked in tenths and
hundredths of a foot. (For Stock No. 1309000.)
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 D6.3
Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline

Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline
STAINLESS STEEL TAPE
1309013
Stainless steel tape, 50 feet long, 3/8-inch wide, marked in tenths and hundredths of a
foot, in a vinyl-covered case.
EMPTY REEL
1309015
Empty reel for use with 200 feet of black tape (Stock No. 1309007) or 300 feet of black
tape (Stock No. 1309008).
TAPE WEIGHT
1309020
Tape weight (Louisiana Ding-Wop) is a solid brass weight, which may be attached to the
end ring of a measuring tape to hold it straight when performing a tape-down. An
adjustable collar allows the length of the weight to be changed so the bottom of the
weight is exactly 1 foot from the end of the tape.
D6.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

D7 Lee Au Handline
D7.1
Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline

Columbus
Tagline Reel
Plastic
Tagline Reel
Lee Au
Tagline Reel
Boat
Tagline Reel
Taglines &
Accessories
Tape
Lee Au
Handline
LEE AU HANDLINE
2201001
A handline is used to make discharge measurements or to collect water-quality or
sediment samples where it is inconvenient to use a sounding reel and bridge board or
crane. It is normally used with a 15- or 30-pound sounding weight, although heavier
weights can be used.
A handline consists of a Lee Au hand reel, 40 feet of 0.10-inch Ellsworth cable, a
pressed-sleeve connector, approximately 30 feet of 1/2-inch diameter electrical cable
with twist-lock receptacle, and an 18-inch pigtail with phone jack.
D7.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

E Wading Rod and Accessories
•= E1 Top-Setting Wading Rod
•= E2 Sectional Wading Rod
•= E3 Winter Rod
Section E
Top Setting Wading Rod
Wading Rod and Accessories

Wading Rod and Accessories
Section E
SECTION CONTENTS
Exploded View of Top-Setting Wading Rod ........................................................................ E1.2
Top-Setting Wading Rod................................................................................................... E1.3
Base................................................................................................................................ E1.3
Sliding Support ................................................................................................................E1.3
Insulating Washer ............................................................................................................ E1.4
Handle with Insulator ....................................................................................................... E1.4
Insulator for Handle ......................................................................................................... E1.4
Trigger with Bumper ........................................................................................................ E1.4
Rubber Tension Bumper ................................................................................................... E1.5
Male Plug Connector (Phone-Type) ................................................................................... E1.5
Electrical Lead, Handle to Plug .......................................................................................... E1.5
Electrical Lead, Rod to Meter ............................................................................................ E1.5
Insulating Bushing............................................................................................................ E1.6
Adapter for Attaching Current-Meter Digitizer..................................................................... E1.6
Trigger Spring for Handle ................................................................................................. E1.6
Phone-Jack Plug Adapter .................................................................................................. E1.6
Round Rod.......................................................................................................................E1.7
Hex Rod .......................................................................................................................... E1.7
Data Cable for Optic AA Meter .......................................................................................... E1.7
Adapter Cable .................................................................................................................E1.7
Exploded View of Sectional Wading Rod ............................................................................ E2.2
Base for Sectional Wading Rod.......................................................................................... E2.3
Lower Section for 1/2-Inch Diameter Wading Rod ............................................................. E2.3
Extension Section for 1/2-Inch Diameter Wading Rod ........................................................ E2.3
End Pole for 1/2-Inch Sectional Wading Rod ..................................................................... E2.4
Sliding Support Assembly for Sectional Wading Rod ........................................................... E2.4
Spring for Sliding Support Assembly, Replacement ............................................................. E2.4
Lever for Sliding Support Assembly, Replacement .............................................................. E2.5
Screw for Lever Sliding Support Assembly, Replacement..................................................... E2.5
Lower Section, for 1/2-Inch Wading Rod ........................................................................... E2.5
Ice Foot........................................................................................................................... E3.2
1-Inch Diameter Rod, Extension Section ........................................................................... E3.2
1-Inch Diameter Rod, Lower Section ................................................................................ E3.2

E1 Top-Setting Wading Rod
E1.1
Top-Setting Wading Rod Sectional Wading Rod Winter Rod

Top-Setting Wading Rod
Sectional Wading Rod
Winter Rod
Exploded view of Top- Setting Wading Rod
E1.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

TOP-SETTING WADING ROD
2101001
The Top-Setting Wading Rod is used to make wading measurements in areas where the
depth of the water is 4 feet deep or less. The hexagonal rod, used to determine the depth
of the water, is calibrated in tenths of a foot and feet from zero to 4 feet. The markings on
the round rod and the scale on the handle are used to set the meter observation depth. AA,
Pygmy, Optic AA, and Ice meters may be used with this wading rod.
FYI: A HIF-repairable stock item.
NOTE: METRIC AND EXTRA-LONG (UP TO 10 FEET) WADING RODS ARE AVAILABLE BY SPECIAL
ORDER. FOR INFORMATION, CONTACT THE HIF.
Base. For top-setting wading rod.
Sliding support. For top-setting wading rod.
To identify associated
components with this
item, a system diagram
appears in Se tion T
BASE
2101002
SLIDING SUPPORT
2101003
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 E1.3
Top-Setting Wading Rod Sectional Wading Rod Winter Rod

Top-Setting Wading Rod
Sectional Wading Rod
Winter Rod
Insulating washer. For top-setting wading rod.
Handle with insulator. For top-setting wading rod.
INSULATING WASHER
2101004
HANDLE WITH INSULATOR
2101005
INSULATOR FOR HANDLE
2101006
Insulator for handle, replacement. For top-setting wading rod.
Trigger with bumper. For top-setting wading rod.
TRIGGER WITH BUMPER
2101007
E1.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

Rubber tension bumper. For top-setting wading rod.
RUBBER TENSION BUMPER
2101008
MALE PLUG CONNECTOR
(PHONE-TYPE)
2101009
Male plug connector (phone-type). For top-setting wading rod.
ELECTRICAL LEAD, HANDLE
TO PLUG
2101010
Electrical lead, handle to plug. For top-setting wading rod.
ELECTRICAL LEAD, ROD TO
METER
2101011
Electrical lead, rod to meter. For top-setting wading rod.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 E1.5
Top-Setting Wading Rod Sectional Wading Rod Winter Rod

Top-Setting Wading Rod
Sectional Wading Rod
Winter Rod
INSULATING BUSHING
2101012
Insulating bushing. For top-setting wading rod. Insulates bolt from handle.
ADAPTER FOR ATTACHING
CURRENT-METER DIGITIZER
2101013
Adapter for attaching current-meter digitizer to top-setting wading rod.
Trigger spring for handle. For top-setting wading rod.
Phone-jack plug adapter. For top-setting wading rod.
TRIGGER SPRING FOR
HANDLE
2101014
PHONE-JACK PLUG ADAPTER
2101015
E1.6 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

Round rod, replacement. For wading rod.
Hex rod, replacement. For wading rod.
ROUND ROD
2101016
HEX ROD
2101017
DATA CABLE FOR OPTIC
AA METER
2101020
Cable connects the Current Meter Digitizer (Stock No. 3202001) to the Optic AA meter
(Stock No. 1107001) so that flow data may be collected.
ADAPTER CABLE
2101021
Catwhisker cable. Converts coil-cord cable for catwhisker use.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 E1.7
Top-Setting Wading Rod Sectional Wading Rod Winter Rod

Top-Setting Wading Rod
Sectional Wading Rod
Winter Rod
HIF’s
Immeasurable
Function
Another Benefit of the HIF QC Program
TRANSDUCERS
100% of transducers are tested
E1.8 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

E2 Sectional Wading Rod
E2.1
Top-Setting Wading Rod Sectional Wading Rod Winter Rod

Top-Setting Wading Rod
Sectional Wading Rod
Winter Rod
Exploded View of Sectional Wading Rod
E2.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

BASE FOR SECTIONAL
WADING ROD
2102002
Base for sectional wading rod. The sectional wading rod is assembled from components. It
is designed for suspension of AA and pygmy meters where the standard wading rod will not
suffice. With the addition of the ice foot, the sectional rod may be used for ice-meter
suspension.
All components are sold separately. The lower section is threaded to fit the base plate. Any
number of intermediate sections may be connected together. The spring-loaded sliding
support permits manual placement of the meter at the correct depth setting. Electrical
leads, necessary to operate a current meter, are external to the rod and are not furnished.
LOWER SECTION FOR
1/2-INCH DIAMETER
WADING ROD
2102003
Lower section for sectional wading rod, 1/2-inch diameter. Attaches to base and extension
section.
EXTENSION SECTION FOR
1/2-INCH DIAMETER
WADING ROD
2102005
Extension section for sectional wading rod, 1/2-inch diameter. Attaches to lower section,
other extension section, and (or) end pole.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 E2.3
Top-Setting Wading Rod Sectional Wading Rod Winter Rod

Top-Setting Wading Rod
Sectional Wading Rod
Winter Rod
END POLE FOR 1/2-INCH
SECTIONAL WADING ROD
2102006
End pole for sectional wading rod, 1/2-inch diameter. Attaches to extension section.
Sliding support assembly. For sectional wading rod.
SLIDING SUPPORT
ASSEMBLY FOR SECTIONAL
WADING ROD
2102007
SPRING FOR SLIDING
SUPPORT ASSEMBLY,
REPLACEMENT
2102008
Spring for sliding support assembly, replacement. For sectional wading rod.
E2.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

LEVER FOR SLIDING
SUPPORT ASSEMBLY,
REPLACEMENT
2102009
Lever for sliding support assembly, replacement. For sectional wading rod.
SCREW FOR LEVER SLIDING
SUPPORT ASSEMBLY,
REPLACEMENT
2102012
Screw for lever sliding support assembly, replacement. For sectional wading rod.
LOWER SECTION, FOR
1/2-INCH WADING ROD
2102013
Lower section, for sectional wading rod 1/2 inch in diameter. Used with winter-style ice
meters only.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 E2.5
Top-Setting Wading Rod Sectional Wading Rod Winter Rod

Top-Setting Wading Rod
Sectional Wading Rod
Winter Rod
Helpful
Inside
Functions
A Benefit of the HIF Customer Support
1-800-382-0634
Use the HIF 1-800 line to inquire about orders,
returns, & stock availability. No answering
machines from 8-4:30 p.m. CST!
E2.6 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

E3 Winter Rod
E3.1
Top-Setting Wading Rod Sectional Wading Rod Winter Rod

Top Setting Wading Rod
Sectional Wading Rod
Winter Rod
ICE FOOT
2103001
The ice foot is used with the lower section of either the 1/2-inch sectioned wading rod
(Stock Number 2102013) or the 1-inch ice rod (Stock Number 2103003) to aid in the
measurement of ice thickness and water depth. Ice meters (Stock Numbers 1104001 and
1104002) may be used with the ice foot. The centerline of the meter may be set to zero on
the rod within this foot.
1-INCH DIAMETER ROD,
EXTENSION SECTION
2103002
Three-foot extension section allows user to combine sections to achieve the desired length.
1-INCH DIAMETER ROD,
LOWER SECTION
2103003
One-inch diameter rod, lower section. For winter meters only. Makes 3-foot length when
used with winter-style ice meter and foot.
E3.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

F Sounding Reel Equipment &
Accessories
• F1 A-Pack Reel
• F2 A-55 Reel
• F3 B-56 Reel
• F4 E-53 Reel
• F5 Sediment Sampling Reel
• F6 Depth Indicator
• F7 Power Drive and Accessories
• F8 Type-B Connector
• F9 Pressed-Sleeve Connector
• F10 Ellsworth Cable and Accessories
Section F
Sounding Reels, Equipment and Accessories

Sounding Reels, Equipment and Accessories
A-Pack Reel.............................................. F1.2
Threading Shaft for A -Pack Reel...................... F1.2
Sheave for 0.084-inch Cable for A-Pack Reel........ F1.2
Depth Indicating Counter for A-Pack Reel........... F1.3
Cable Replacement Kit for A-Pack Reel.............. F1.3
Underwater Connector Cable Termination Kit ....... F1.3
A-55 Sounding Reel .................................... F2.2
Roller Assembly for A -55 Reel......................... F2.2
Cable Laying Shaft for A-55 Reel ..................... F2.3
Brass Sheave for 0.10-inch Cable for A-55 Reel .... F2.3
Collector Ring for A-55 Reel........................... F2.3
Electrical Brush for A-55, B-56, & E-53 Reels ....... F2.3
Insulator for A-55 Reel................................. F2.4
Crank Arm Replacement for A-55 Reel............... F2.4
Ratchet for A-55 Reel.................................. F2.4
Pawl, with Screw and Spring for A-55 Reel.......... F2.4
Base Stud 3/8-16 for A-55, B-56, & E-53 Reels ..... F2.5
Wing Nut 3/8-16 for A-55, B-56, & E-53 Reels...... F2.5
Thumb Screw for A-55 Handle ........................ F2.5
Brush Holder Assembly for A-55 Reel................ F2.5
Cable Replacement Kit with Connector for A-55
Reel.................................................... F2.6
Retaining Spring Roller for A-55 Reel ................ F2.6
Retaining Arm Roller for A-55 Reel................... F2.6
Drag Brake for A-55 Reel.............................. F2.7
Trunk for A-55 Reel .................................... F2.7
Breakaway Cable Kit for 0.084 and 0.10 Cable...... F2.7
Breakaway Cable Kit for 0.125 Cable................. F2.8
Nicopress Tools ......................................... F2.8
B-56 Reel................................................ F3.2
Threading Shaft for B-56 Reel......................... F3.2
Brass Sheave for B-56 Reel (Standard).............. F3.2
Sheave for B-56 Reel (Optional) ...................... F3.3
Brake Clutch Facing for B-56 Reel.................... F3.3
Collector Ring for B-56 Reel........................... F3.3
Insulator for B-56 Reel................................. F3.3
Plastic Screw, 8/32 inch by 5/16 inch ................ F3.4
Crank, with 2 Hubs for B-56 Reel..................... F3.4
Crank Nut for B-56 Reel................................ F3.4
Trunk for B-56 Reel..................................... F3.5
Power Conversion Kit for B-56 Reel.................. F3.5
Cable Replacement Kit for B-56 Reel, 0.125-in
Cable................................................... F3.5
Brush Holder Assembly for B-56 Reel................ F3.6
Cable Replacement Kit for B-56 Reel, 0.10-in
Cable .................................................. F3.6
E-53 Reel................................................ F4.2
Threading Shaft for E-53 Reel......................... F4.2
Brass Sheave for E-53 Reel, Fits 0.10-inch Cable... F4.2
Brass Cable Sheave for E-53 Reel, Fits 1/8-inch
Cable................................................... F4.3
Brake Clutch Facing for E-53 Reel.................... F4.3
Collector Ring for E-53 Reel........................... F4.3
Insulator for E-53 Reel................................. F4.3
Crank for E-53 Reel..................................... F4.4
Trunk for E-53 Reel..................................... F4.4
Brush Holder Assembly for E-53 Reel................ F4.4
Section F
SECTION CONTENTS
Brake Arm Assembly for E-53 Reel ...................F4.5
E-53 Reel Cable Replacement Kit .....................F4.5
Plastic Screw, 6/32 inch By 5/16 inch ................F4.5
E-53 Reel Optional Cable Replacement Kit...........F4.6
Aircraft Cable, 3/32-inch Stainless Steel .............F5.2
Sediment-Sampler Hanger.............................F5.2
Type-A Depth Indicator ................................F6.2
Lucite Cover for Computing Type-A Depth
Indicator...............................................F6.2
Crank for Computing Type-A Depth Indicator.......F6.2
Hand Indicator for Computing Type-A Depth
Indicator...............................................F6.2
Power Drive Unit Assembly for B-56 & E-53 Reels..F7.2
Trunk for Power Drive Unit ............................F7.2
Trigger Switch for Power Drive Unit ..................F7.3
V-Belts for J&H Motor ..................................F7.3
Brushes for Power Drive Unit..........................F7.3
Battery Cable To Drive Motor..........................F7.3
Type-B Connector.......................................F8.2
Brass Bushing for Type-B Connectors................F8.2
Nylon Bushing for Type-B Connectors................F8.2
Clevis for Type-B Connector...........................F8.2
Clevis Pin, Stainless Steel, 5/16-inch Diameter......F8.3
Safety Pin, Secures Clevis Pin In Clevis ..............F8.3
Brass Bushing Retrofit Kit, for Type-B Connectors..F8.3
Pressed-Sleeve Connector .............................F9.2
Stainless Steel Pin for Pressed-Sleeve Connector...F9.2
Cotter Pin ................................................F9.2
Ellsworth Cable........................................ F10.2
Sleeve Size A for Ellsworth Cable-End
Terminators ......................................... F10.2
Sleeve Size B for Ellsworth Cable-End
Terminators ......................................... F10.2
Sleeve Size C for Ellsworth Cable-End
Terminators ......................................... F10.3
Sleeve Size D for Ellsworth Cable-End
Terminators ......................................... F10.3
TL-8 Cable Clip ........................................ F10.3
TL-10 Cable Clip....................................... F10.3
Cable Sleeving, 3-Foot ............................... F10.4
Ring-Type Terminal (No. 10 Stud).................. F10.4
Hook-Type Terminal.................................. F10.4
Spade-Type Terminal................................. F10.4
Ring-Type Terminal (3/8-inch Stud) ................ F10.5
Ring-Type Terminal (No. 2 Stud) ................... F10.5
Parallel Connector..................................... F10.5
Crimping Tool.......................................... F10.5
Nicopress Sleeve, 1-102D, 5/16-inch............... F10.6
Nicopress Sleeve, 1-102D, 7/8 inch................. F10.6
Nicopress Sleeve, 1-102D, 1-1/2 inch .............. F10.6
Nicopress Sleeve, 1-080D, 1-1/2 inch .............. F10.6
Nicopress Tool, 310-C................................ F10.7
Heavy Duty Side-Cutting Pliers...................... F10.7
Repair Kit for Surface-Water Equipment ........... F10.8
Container for Repair Kit .............................. F10.8
Repair Kit for Ground-Water Equipment ........... F10.9

F1 A-Pack Reel
F1.1
A-Pack Reel
A-55 Reel
B-56 Reel E-53 Reel
Sediment
Sampling Reel

A-Pack Reel
E-53 Reel B-56 Reel A-55 Reel
Sediment
Sampling Reel
A-PACK REEL
2301000
The A-pack reel is used to suspend stream-gaging and sample-collection equipment.
The reel is small and compact, usually used with weights not exceeding 50 pounds. It
has a three-bolt base. HIF-distributed bridge boards (Stock No. 2701001) and late
model cable cars (Stock Nos. 2601001 and 2602001) are drilled to accommodate this
reel. Other equipment must be drilled to fit.
The reel is equipped with a counter to measure water depth, a removable handle, 45
feet of 0.084-inch Ellsworth cable, and a steel carrying case. Weight of the reel,
including carrying case, is approximately 22 pounds.
FYI: A HIF-repairable stock item.
Sheave for 0.084-inch cable for A-Pack reel.
THREADING SHAFT FOR
A-PACK REEL
2301003
SHEAVE FOR 0.084-INCH
CABLE FOR A-PACK REEL
2301004
F1.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Depth indicating counter for A-Pack reel.
DEPTH INDICATING
COUNTER FOR A-PACK REEL
2301007
CABLE REPLACEMENT KIT
FOR A-PACK REEL
2301008
Cable replacement kit for A-Pack reel. Contains pressed-sleeve connector and 45 feet
of 0.84-inch cable.
UNDERWATER CONNECTOR
CABLE TERMINATION KIT
2301020
Enables Ellsworth cable to transmit signals from the optic-head current meter to the
current meter digitizer.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 F1.3
A-Pack Reel
A-55 Reel
B-56 Reel E-53 Reel
Sediment
Sampling Reel

A-Pack Reel
E-53 Reel B-56 Reel A-55 Reel
Sediment
Sampling Reel
Helpful,
Important
Facts
A Benefit of the HIF Rent-to-Own Program
$$$CREDIT$$$
Earn credit while renting
F1.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

F2 A-55 Reel
F2.1
A-Pack Reel
A-55 Reel
B-56 Reel E-53 Reel
Sediment
Sampling Reel

A-Pack Reel
E-53 Reel B-56 Reel A-55 Reel
Sediment
Sampling Reel
A-55 SOUNDING
REEL
2302000
The A-55 Sounding Reel is used to suspend stream gaging and water quality sampling
equipment and may be used with sounding weights up to 100 pounds. It is easily
mounted on standard USGS cranes, cable cars, bridge boards, and boat outfits. This
reel is equipped with 80 feet of 0.10-inch cable, removable handle, USGS computing
depth indicator, pressed-sleeve connector, and steel carrying case. Weight of the reel,
including carrying case, is approximately 32 pounds.
FYI: Save time and money on repairs for this item: Return to the HIF.
NOTE: BY SPECIAL REQUEST, A TYPE-B CONNECTOR WILL BE SUPPLIED INSTEAD OF THE
PRESSED-SLEEVE CONNECTOR. THERE IS AN ADDITIONA L CHARGE BY HIF FOR
INSTALLATION OF THE TYPE-B CONNECTOR.
ROLLER ASSEMBLY FOR
A-55 REEL
2302002
Roller assembly. Keeps cable aligned on reel, for A-55 reel.
F2.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Cable laying shaft for A-55 reel.
Brass sheave for 0.10-inch cable for A-55 reel.
Collector ring for A-55 reel.
Electrical brush for A-55, B-56, and E-53 reels.
CABLE LAYING SHAFT FOR
A-55 REEL
2302003
BRASS SHEAVE FOR
0.10-INCH CABLE FOR
A-55 REEL
2302004
COLLECTOR RING FOR
A-55 REEL
2302005
ELECTRICAL BRUSH FOR
A-55, B-56, & E-53 REELS
2302006
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 F2.3
A-Pack Reel A-55 Reel
B-56 Reel E-53 Reel
Sediment
Sampling Reel

A-Pack Reel
E-53 Reel B-56 Reel A-55 Reel
Sediment
Sampling Reel
INSULATOR FOR A-55 REEL
2302007
Insulator. Insulated collector ring from drum, for A-55 reel.
Crank arm replacement for A-55 reel.
CRANK ARM REPLACEMENT
FOR A-55 REEL
2302008
RATCHET FOR A-55 REEL
2302009
Ratchet. Used with pawl to stop drum from unrolling more cable, for A-55 reel.
Pawl, with screw and spring for A-55 reel.
PAWL, WITH SCREW AND
SPRING FOR A-55 REEL
2302010
F2.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Base stud 3/8-16 for A-55, B-56, and E-53 reels.
BASE STUD 3/8-16 FOR
A-55, B-56, & E-53 REELS
2302011
WING NUT 3/8-16 FOR
A-55, B-56, & E-53 REELS
2302012
Wing nut 3/8-16 for A-55, B-56, and E-53 reels. Packed in bag of four.
THUMB SCREW FOR A-55
HANDLE
2302013
Thumb screw, 5/16-18 by 1/2 inch long. Holds handle for A-55 reel.
Brush holder assembly for A-55 reel.
BRUSH HOLDER ASSEMBLY
FOR A-55 REEL
2302014
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 F2.5
A-Pack Reel A-55 Reel
B-56 Reel E-53 Reel
Sediment
Sampling Reel

A-Pack Reel
E-53 Reel B-56 Reel A-55 Reel
Sediment
Sampling Reel
CABLE REPLACEMENT KIT
WITH CONNECTOR FOR
A-55 REEL
2302015
Cable replacement kit with connector for A-55 reel. Contains 80 feet of 0.10-inch cable
with installed pressed-sleeve connector.
Retaining spring roller for A-55 reel.
Retaining arm roller for A-55 reel.
RETAINING SPRING ROLLER
FOR A-55 REEL
2302016
RETAINING ARM ROLLER
FOR A-55 REEL
2302017
F2.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Drag brake with drag brake reel kit for the A-55 reel.
Trunk for A-55 Reel.
DRAG BRAKE FOR A-55 REEL
2302018
TRUNK FOR A-55 REEL
2302022
BREAKAWAY CABLE KIT FOR
0.084 AND 0.10 CABLE
2302075
The breakaway cable kit allows the cable to safely separate from the reel when cable
has completely payed out and a load of 500 pounds is applied to the cable. This safety
feature is required on all sounding reels operated by the USGS. A technical
information sheet (Stock No. 0230275), that provides installation instructions, is
provided with each kit.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 F2.7
A-Pack Reel A-55 Reel
B-56 Reel E-53 Reel
Sediment
Sampling Reel

A-Pack Reel
E-53 Reel B-56 Reel A-55 Reel
Sediment
Sampling Reel
BREAKAWAY CABLE KIT
FOR 0.125 CABLE
2302076
Kit includes one Nicopress #872-17-J 3/32-inch stop sleeve, one Nicopress #872-18-J
1/8-inch stop sleeve, one #6 ring terminal and two inches of 1/8-inch expanded ID
heat shrink tubing. Tech sheet (Stock No. 0230275) is included in each kit.
NICOPRESS TOOLS
2302077
Nicopress tools (one pn 51-MJ and one pn 51-C-887) used to install breakaway kits (Stock Nos.
2302075 and 2302076). Both tools are required to properly install kit. HIF will loan the tools to
a district for one month.
F2.8 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

F3 B-56 Reel
F3.1
A-Pack Reel
A-55 Reel
B-56 Reel E-53 Reel
Sediment
Sampling Reel

A-Pack Reel
E-53 Reel B-56 Reel A-55 Reel
Sediment
Sampling Reel
B-56 REEL
2303000
The B-56 reel is used to suspend stream gaging and sample-collection equipment and
may be used manually or with power equipment (not included). It comes equipped
with 144 feet of 0.10-inch cable, B-connector, USGS computing depth indicator, ratchet
and pawl to hold the suspended equipment in position, a clutch for controlling the free
fall speed of suspended equipment, a removable 2-position crank handle, and a steel
case. The weight of the reel, including carrying case, is approximately 62 pounds.
If powered reel operation is desired, a power conversion kit (Stock No. 2303014) must
be installed on the reel, and a power drive unit (Stock No. 2307001) must be used. If
heavier cable is desired, the reel will support 115 feet of 0.125-inch cable. Use of
0.125 cable also requires a 0.125 sheave (Stock No. 2303004) which must be ordered
separately. FYI: This stock item is repairable by the HIF.
Threading shaft for B-56 reel.
THREADING SHAFT FOR
B-56 REEL
2303002
BRASS SHEAVE FOR B-56
REEL (STANDARD)
2303003
Brass sheave for B-56 reel (standard). Fits 0.10-inch cable.
F3.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Sheave for B-56 reel (optional). Fits 0.125-inch cable.
Brake clutch facing for B-56 reel.
Collector ring for B-56 reel.
SHEAVE FOR B-56 REEL
(OPTIONAL)
2303004
BRAKE CLUTCH FACING
FOR B-56 REEL
2303005
COLLECTOR RING FOR
B-56 REEL
2303006
INSULATOR FOR B-56 REEL
2303008
Insulator. Insulates collector ring from drum of B-56 reel.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 F3.3
A-Pack Reel
A-55 Reel
B-56 Reel E-53 Reel
Sediment
Sampling Reel

A-Pack Reel
E-53 Reel B-56 Reel A-55 Reel
Sediment
Sampling Reel
PLASTIC SCREW,
8/32 INCH BY
5/16 INCH
2303009
Plastic screw, 8/32 inch by 5/16 inch attaches collector ring to drum of B-56 reel,
25 per package.
Crank, with 2 hubs for B-56 reel.
Crank nut for B-56 reel.
CRANK, WITH 2 HUBS FOR
B-56 REEL
2303010
CRANK NUT FOR B-56 REEL
2303011
F3.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Trunk for B-56 reel.
Power conversion kit for B-56 reel.
TRUNK FOR B-56 REEL
2303013
POWER CONVERSION KIT
FOR B-56 REEL
2303014
CABLE REPLACEMENT KIT
FOR B-56 REEL, 0.125-IN.
CABLE
2303017
Cable replacement kit, 0.125-inch cable, 115-feet long for B-56 reel.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 F3.5
A-Pack Reel
A-55 Reel
B-56 Reel E-53 Reel
Sediment
Sampling Reel

A-Pack Reel
E-53 Reel B-56 Reel A-55 Reel
Sediment
Sampling Reel
Brush holder assembly for B-56 reel.
BRUSH HOLDER ASSEMBLY
FOR B-56 REEL
2303018
CABLE REPLACEMENT KIT
FOR B-56 REEL, 0.10-IN.
CABLE
2303019
Cable replacement kit for B-56 reel. Contains 144 feet of 0.10-inch cable without
B-connector.
F3.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

F4 E-53 Reel
F4.1
A-Pack Reel
A-55 Reel
B-56 Reel E-53 Reel
Sediment
Sampling Reel

A-Pack Reel
E-53 Reel B-56 Reel A-55 Reel
Sediment
Sampling Reel
E-53 REEL
2304000
The E-53 Reel is used to suspend stream-gaging and sample-collection equipment and
is designed for use with the heaviest weights and sample equipment. This reel should
only be used with power equipment (not included), however, it may be operated
manually should an emergency situation arise. The reel comes equipped with 165 feet
of 0.125-inch cable, B-connector, USGS computing depth indicator, an emergency
crank handle, and a steel case. The weight of the reel, including carrying case, is
approximately 92 pounds.
If a lighter cable is desired, the reel will support 206 feet of 0.10-inch cable (Stock No.
2304019). Use of 0.10 cable also requires a 0.10 sheave (Stock No. 2304003) which
must be ordered separately. FYI: A HIF-repairable stock item.
Threading shaft for E-53 reel.
Brass sheave for E-53 reel. Fits 0.10-inch cable.
THREADING SHAFT FOR
E-53 REEL
2304002
BRASS SHEAVE FOR E-53
REEL, FITS 0.10-INCH
CABLE
2304003
F4.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Brass cable sheave for E-53 reel. Fits 1/8-inch cable.
Brake clutch facing for E-53 reel.
Collector ring for E-53 reel.
BRASS CABLE SHEAVE FOR
E-53 REEL, FITS 1/8-INCH
CABLE
2304004
BRAKE CLUTCH FACING
FOR E-53 REEL
2304005
COLLECTOR RING
FOR E-53 REEL
2304006
INSULATOR FOR E-53 REEL
2304008
Insulator. Insulates ring collector from drum of E-53 reel.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 F4.3
A-Pack Reel
A-55 Reel
B-56 Reel
E-53 Reel
Sediment
Sampling Reel

A-Pack Reel
E-53 Reel B-56 Reel A-55 Reel
Sediment
Sampling Reel
Crank for E-53 reel.
Trunk for E-53 reel.
Brush holder assembly for E-53 reel.
CRANK FOR E-53 REEL
2304009
TRUNK FOR E-53 REEL
2304012
BRUSH HOLDER ASSEMBLY
FOR E-53 REEL
2304015
F4.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Brake arm assembly for E-53 reel.
BRAKE ARM ASSEMBLY FOR
E-53 REEL
2304016
E-53 REEL CABLE
REPLACEMENT KIT
2304017
E-53 reel cable replacement kit. Contains 165 feet of 0.125-inch cable and all
necessary parts to install the cable on an E-reel in the field. Does not include a Type-B
connector.
PLASTIC SCREW, 6/32 INCH
BY 5/16 INCH
2304018
Plastic screw, 6/32 inch by 5/16 inch for collector ring for E-53 reel. Package of 25.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 F4.5
A-Pack Reel
A-55 Reel
B-56 Reel
E-53 Reel
Sediment
Sampling Reel

A-Pack Reel
E-53 Reel B-56 Reel A-55 Reel
Sediment
Sampling Reel
E-53 REEL OPTIONAL CABLE
REPLACEMENT KIT
2304019
E-53 reel optional cable replacement kit. Contains 200 feet of 0.10-inch cable and all
necessary parts to install the cable on an E-reel in the field. Does not include a Type-B
connector.
F4.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

F5 Sediment Sampling Reel
Accessories
F5.1
A-Pack Reel
A-55 Reel
B-56 Reel E-53 Reel
Sediment
Sampling Reel

A-Pack Reel
A-55 Reel
B-56 Reel
E-53 Reel
Sediment
Sampling Reel
AIRCRAFT CABLE,
3/32-INCH STAINLESS
STEEL
2305004
Aircraft cable, 3/32-inch stainless steel, for sediment-sampling reel.
SEDIMENT-SAMPLER
HANGER
2305005
Sediment-sampler hanger. Connects sediment samplers to sediment sampling reel.
F5.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

F6 Depth Indicator
F6.1
Power Drive &
Depth Indicator Accessories Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories

Depth Indicator
Power Drive &
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories
TYPE-A DEPTH INDICATOR
2306001
The computing depth indicator is installed in a sounding reel to indicate water depth.
A pointer indicates depth. Tens of feet are read on a numbered dial through an
aperture near the top of the main dial. The main dial also contains a graduated spiral
to indicate directly the 0.8 depth positions for depths up to 30 feet.
Cover, Lucite for computing type-A depth indicator.
Crank for computing type-A depth indicator.
Hand indicator for computing type-A depth indicator.
LUCITE COVER FOR
COMPUTING TYPE-A DEPTH
INDICATOR
2306002
CRANK FOR COMPUTING
TYPE-A DEPTH INDICATOR
2306003
HAND INDICATOR FOR
COMPUTING TYPE-A DEPTH
INDICATOR
2306004
F6.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

F7 Power Drive & Accessories
F7.1
Depth Indicator
Power Drive &
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories

Depth Indicator
Power Drive &
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories
POWER DRIVE UNIT
ASSEMBLY FOR B-56 &
E-53 REELS
2307001
This power drive unit has a 12-volt dc electric motor that is equipped with dual V-belt
pulleys for use with B-56 reels converted for power drive and E-53 reels. The dc motor
is a heavy-duty Jack and Heintz and includes trigger switch, trunk, two V-belts, and
connecting battery cables. A heavy-duty 12-volt battery is required, but not furnished.
The power unit provides power for lifting the weight assembly only. Lowering the
device is accomplished by gravity.
The mounting bracket is adaptable to the USGS bridge cranes and boat boom.
Standard USGS cable cars must be modified to attach the power unit. Recommended
modifications to cable cars can be obtained by calling the HIF.
FYI: Save time and money on repairs for this item: Return to the HIF.
Trunk for power drive unit.
TRUNK FOR POWER DRIVE
UNIT
2307002
F7.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/
-

Trigger switch for power drive unit.
TRIGGER SWITCH FOR
POWER DRIVE UNIT
2307003
V-BELTS FOR J&H MOTOR
2307004
V-belts for J&H motor. Sold as a set of 4 (two are 1/2 inch x 28 inches and two are
1/2 inch x 40 inches).
Brushes for power drive unit. Set of 4.
Battery cable to drive motor.
BRUSHES FOR POWER
DRIVE UNIT
2307005
BATTERY CABLE TO DRIVE
MOTOR
2307006
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 F7.3
Power Drive &
Depth Indicator
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories

Depth Indicator
Power Drive &
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories
Helpful,
Important
Facts
Another Benefit of the HIF
Rent-to-Own Program
- WHAT YOU GET -
All rental benefits apply while renting
F7.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

F8 Type-B Connector
F8.1
Depth Indicator
Power Drive &
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories

Type B
Depth Indicator
Connector
Power Drive &
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories
TYPE-B CONNECTOR
2308001
Type-B connector. Fits 0.10 and 0.125-inch Ellsworth cable.
Connectors are used to join the end of the reel cable to the hanger bar. The Type-B
connector may be used with either 0.10-inch or 0.125-inch Ellsworth cable.
Brass bushing for Type-B connectors.
Bushing, nylon for Type-B connectors.
Clevis for Type-B connector.
BRASS BUSHING FOR
TYPE-B CONNECTORS
2308002
NYLON BUSHING FOR
TYPE-B CONNECTORS
2308003
CLEVIS FOR TYPE-B
CONNECTOR
2308004
F8.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

CLEVIS PIN, STAINLESS
STEEL, 5/16-INCH DIAMETER
2308005
Clevis pin, stainless steel, 5/16-inch diameter; 11/16 inch long. For Type-B connector.
Safety pin. Secures clevis pin in clevis.
Brass bushing retrofit kit, for Type-B connectors.
SAFETY PIN, SECURES CLEVIS
PIN IN CLEVIS
2308006
BRASS BUSHING RETROFIT
KIT, FOR TYPE-B
CONNECTORS
2308007
wwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 F8.3
Depth Indicator
Power Drive &
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories

Type B
Depth Indicator
Connector
Power Drive &
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories
HIF
Informative
Fact
A Benefit of the HIF Warehouse
FIRST ORDERED – FIRST SERVED
Backorders are stored in system as they are
received. They are released in same order when
stock is available.
F8.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

F9 Pressed-Sleeve Connector
F9.1
Depth Indicator
Power Drive &
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories

Depth Indicator
Power Drive &
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories
PRESSED-SLEEVE
CONNECTOR
2309001
Connectors are used to join the end of the reel cable to the hanger bar. The pressedsleeve
connector may be used with either 0.084-inch or 0.10-inch Ellsworth cable. It
should not be used with sounding weights in excess of 50 pounds.
STAINLESS STEEL PIN FOR
PRESSED-SLEEVE
CONNECTOR
2309002
Stainless steel pin, 1/4-inch diameter, 3/4-inch long, for pressed-sleeve connector.
Connects weight hanger bar to pressed-sleeve connector.
COTTER PIN
2309003
Cotter pin, 3/32-inch diameter, 3/4-inch long. Secures pin in pressed-sleeve
connector.
F9.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

F10 Ellsworth Cable & Accessories
F10.1
Power Drive &
Depth Indicator
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories

Depth Indicator
Power Drive &
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories
ELLSWORTH CABLE
Ellsworth cable is a 2-conductor, reverse-lay, stainless steel cable with an insulated
center conductor. It is used on all reels operated by the USGS.
Cable Diameter
(in inches) Stock Number
0.84 2316001
0.100 2316002
0.125 2316003
Sleeve size A. For Ellsworth cable-end terminators.
Sleeve size B. For Ellsworth cable-end terminators.
SLEEVE SIZE A FOR
ELLSWORTH CABLE-END
TERMINATORS
2316004
SLEEVE SIZE B FOR
ELLSWORTH CABLE-END
TERMINATORS
2316005
F10.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Sleeve size C. For Ellsworth cable-end terminators.
Sleeve size D. For Ellsworth cable-end terminators.
SLEEVE SIZE C FOR
ELLSWORTH CABLE-END
TERMINATORS
2316006
SLEEVE SIZE D FOR
ELLSWORTH CABLE-END
TERMINATORS
2316007
TL-8 CABLE CLIP
2316008
TL-8 cable clip. For repairing steel taglines or attaching flags to 0.125-inch Ellsworth
cable.
TL-10 CABLE CLIP
2316009
TL-10 cable clip. For repairing steel taglines or attaching flags to 0.10-inch Ellsworth
cable.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 F10.3
Power Drive &
Depth Indicator
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories

Depth Indicator
Power Drive &
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories
CABLE SLEEVING, 3-FOOT
2316010
Cable sleeving, 3-foot. For protecting end terminations on Ellsworth cable.
RING-TYPE TERMINAL
(NO. 10 STUD)
2316011
No. 10 stud size insulated ring-type terminal for 18-22 AWG size wire.
Hook-type terminal.
Spade-type terminal.
HOOK-TYPE TERMINAL
2316012
SPADE-TYPE TERMINAL
2316013
F10.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

RING-TYPE TERMINAL
(3/8-INCH STUD)
2316014
3/8-inch stud-size, non-insulated, ring-type terminal for No. 4 AWG size wire
(amp 3346).
RING-TYPE TERMINAL
(NO. 2 STUD)
2316015
No. 2 stud-size, insulated ring-type terminal for 18-22 AWG size wire.
Parallel connector.
PARALLEL CONNECTOR
2316016
CRIMPING TOOL
2316017
Crimping tool, manufactured by AMP, for the following terminals and splices:
• 22−16 AWG Red PIDG* terminals and splices
• 22−16 AWG Red Plasti-Grip* terminals and splices
• 14−12 AWG Yellow sealed splices
• 22−18 AWG Red spare wire caps
* AMP trademark
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 F10.5
Power Drive &
Depth Indicator
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories

Depth Indicator
Power Drive &
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories
NICOPRESS SLEEVE,
1-102D, 5/16-INCH
2316018
Nicopress sleeve, 1-102D, 5/16-inch. For 0.10-inch cable.
Nicopress sleeve, 1-102D, 7/8 inch. For 0.10-inch cable.
NICOPRESS SLEEVE,
1-102D, 7/8 INCH
2316019
NICOPRESS SLEEVE,
1-102D, 1-1/2 INCH
2316020
Nicopress sleeve, 1-102D, 1-1/2 inch. For 0.10-inch cable.
NICOPRESS SLEEVE,
1-080D, 1-1/2 INCH
2316021
Nicopress sleeve, 1-080D, 1-1/2 inch. For 0.084-inch cable.
F10.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

NICOPRESS TOOL, 310-C
2316025
Nicopress tool, 310-C. Used to attach Nicopress sleeves to Ellsworth cable.
HEAVY DUTY SIDE-
CUTTING PLIERS
2316026
Heavy-duty side-cutting pliers. Designed to cut up to 1/8-inch diameter Ellsworth and
Kevlar cable.
Heavy duty, side-cutting pliers approximately 9 inches long. High-leverage design,
easily cuts Ellsworth suspension cable, wading, and boat taglines. Extra-hard cutting
knives designed for cutting nails, small bolts, and most hardened wire. Smooth, roundhead
design. Plastic-dipped handles.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 F10.7
Power Drive &
Depth Indicator
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories

Depth Indicator
Power Drive &
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories
REPAIR KIT FOR SURFACE-
WATER EQUIPMENT
2316027
Repair kit, for surface-water equipment. Used to repair Ellsworth reel cable and metal
taglines.
A surface-water repair kit in a 12-compartment tackle box includes a cable-cutting tool,
an emery cloth, 3-foot cable sleeving, and an assortment of sleeves, terminals, and
parallel connectors.
Container for repair kit. 12-compartment tackle box.
CONTAINER FOR REPAIR KIT
2316028
F10.8 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

REPAIR KIT FOR GROUND-
WATER EQUIPMENT
2314017
The ground-water equipment repair kit includes an AMP tool, cutting tool, Nicopress
tool, plastic shield, anode, cable and fitting, screwdriver, 8-inch mill smooth file, 3-foot
length of sleeving, and an assortment of special screws, washers, Nicopress sleeves,
and AMP terminals.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 F10.9
Power Drive &
Depth Indicator
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories

Depth Indicator
Power Drive &
Accessories
Type-B Connector
Pressed-Sleeve
Connector
Ellsworth Cable
& Accessories
Handy
Informative
Fact
Another Benefit of the HIF Customer Support
BACKORDER STATUS
Customers can determine status of their backorder
by using HIF-CSSII Backorder Detail Report.
F10.10 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

G Boat Equipment & Accessories
•= G1 Boat Equipment and Accessories
Section G
Boat Equipment and Accessories

Boat Equipment and Accessories
Boat Outfit..................................................................................................................... G1.2
Telescoping Boom without Nose Piece ............................................................................. G1.2
Nose Piece (Sheave)....................................................................................................... G1.3
Crosspiece ..................................................................................................................... G1.3
Right End Bracket........................................................................................................... G1.3
Left End Bracket............................................................................................................. G1.4
Clamp Standard ............................................................................................................. G1.4
Straight Guide Roller ...................................................................................................... G1.4
Tapered Guide Roller...................................................................................................... G1.5
Clamp Holder ................................................................................................................. G1.5
Clamp Handle ................................................................................................................ G1.5
Clamp Latch................................................................................................................... G1.5
Left Roller Latch............................................................................................................. G1.6
Right Roller Latch........................................................................................................... G1.6
Roller Holder.................................................................................................................. G1.6
Boat Tagline Gripper/Cutter ............................................................................................ G1.7
Section G
SECTION CONTENTS

G1 Boat Equipment &
Accessories
G1.1
Boat Equipment and Accessories

Boat Equipment and Accessories
BOAT OUTFIT
2401000
The Boat Outfit is designed to allow the collection of water samples or the making of
discharge measurements safely from a small boat. It consists of a 69-inch crosspiece that
reaches across the boat and is clamped to the sides of the boat and a boom attached to
the center of the crosspiece that extends out over the bow of the boat. The crosspiece is
equipped with a guide sheave and clamp at each end to attach the boat to the tagline
(special order item not provided, contact the HIF for details) and make it possible to slide
the boat along the tagline from one station to the next. The crosspiece also has a clamp
that prevents lateral movement of the boat along the tagline when data collection is in
progress and a cable cutter to cut the tagline in an emergency. The boom telescopes from
45 inches to 75 inches which allows it to fit a variety of boats. It is equipped with a reel
plate that will accommodate the A-55, B-56, and E-53 Reels and a sheave (nosepiece) that
pivots to allow the meter to be raised out of the water.
To identify
associated components
with this item,
a system diagram
TELESCOPING BOOM
WITHOUT NOSE PIECE
2401001
Boom telescopes from 45 inches to 75 inches. It is equipped with a reel seat that will
accommodate the A-55, B-56, and E-53 Reels.
G1.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

NOSE PIECE (SHEAVE)
2401002
The nosepiece serves as the cable guide on the boom. When the nosepiece is pivoted
back toward the reel seat, the meter may be raised out of the water.
CROSSPIECE
2401003
The 69-inch crosspiece clamps to the sides of the boat and supports the reel seat end of
the telescoping boom. It is equipped with a guide sheave and clamp at each end to attach
the boat to the tagline (special order item not provided, contact the HIF for details) and
make it possible to slide the boat along the tagline. A second clamp prevents lateral
movement of the boat along the tagline when data collection is in progress.
RIGHT END BRACKET
2401004
The end bracket holds the guide rollers (Stock Nos. 2401007 and 2401008), guide roller
holder (Stock No. 2401014), and the roller latch (Stock No. 2401012) which allows the
boat to slide along the tagline.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 G1.3
Boat Equipment and Accessories

Boat Equipment and Accessories
LEFT END BRACKET
2401005
The end bracket holds the guide rollers (Stock Nos. 2401007 and 2401008), guide roller
holder (Stock No. 2401014), and the roller latch (Stock No. 2401012) which allows the
boat to slide along the tagline.
CLAMP STANDARD
2401006
The clamp standard holds the clamp handle (Stock No. 2401010) and the clamp latch
(Stock No. 2401011) which lock the boat to the tagline to prevent the boat from moving
while collecting data.
STRAIGHT GUIDE ROLLER
2401007
The straight guide roller attaches to the guide roller holder (Stock No. 2401014) to guide
the tagline across the boat.
G1.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

TAPERED GUIDE ROLLER
2401008
The tapered guide roller attaches to the end bracket (Stock Nos. 2401004 and 2401005) to
guide the tagline across the boat.
CLAMP HOLDER
2401009
The clamp holder bolts into the crosspiece to hold the clamp standard (Stock No.
2401006), clamp handle (Stock No. 2401010), and clamp latch (Stock No. 2401011).
These pieces combine to prevent the boat from sliding along the tagline when data
collection is in progress.
CLAMP HANDLE
2401010
The clamp handle holds the tagline against the clamp standard (Stock No. 2401006) to
prevent the boat from sliding along the tagline during data collection.
CLAMP LATCH
2401011
The clamp latch locks the clamp handle (Stock No. 2401010) in position.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 G1.5
Boat Equipment and Accessories

Boat Equipment and Accessories
LEFT ROLLER LATCH
2401012
The roller latch locks the guide roller holder (Stock No. 2401014) in place to allow the boat
to slide along the tagline.
RIGHT ROLLER LATCH
2401013
The roller latch locks the guide roller holder (Stock No. 2401014) in place to allow the boat
to slide along the tagline.
ROLLER HOLDER
2401014
The straight guide roller (Stock No. 2401007) is attached to the guide roller holder to assist
in sliding the boat along the tagline.
G1.6 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

BOAT TAGLINE
GRIPPER/CUTTER
2401018
The boat tagline gripper/cutter replaces the bronze cable gripper assembly on the USGS
boat equipment. The gripper/cutter can grip and cut both steel and Kevlar boat taglines up
through 1/8-inch diameter. The gripper is a pair of sheet-metal-style Vise-Grip pliers with
rubber-lined jaws. The cutter is a pair of Felco brand specialty cable cutters with a unique
hardened jaw intended for cutting hardened steel wire and cable. Brackets hold the
gripper/cutter in a convenient position for instant use.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 G1.7
Boat Equipment and Accessories

Boat Equipment and Accessories
Helpful,
Improved
Features
A Benefit of the HIF Repair Program
EASIER!
HIF-CSS II simplifies paperwork
G1.8 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

H Bridge Bridge Equipment
Equipment
•= H1 Three-Wheel Base
•= H2 Type-A Four-Wheel Truck
•= H3 Type-A Crane
•= H4 Type-E Heavy-Duty Truck
•= H5 Type-E Heavy-Duty Crane
•= H6 Bridge Board
Section H
Type A Four-
Bridge Equipment
Wheel Truck
Type A Crane
Type E Heavy
Duty Truck
Type E Heavy
Duty Crane
Bridge Boards

Bridge Equipment
Type A Four-
Wheel Truck
Type A Crane
SECTION CONTENTS
Three-Wheel Base .......................................................................................................... H1.2
Three-Wheel Base Stand................................................................................................. H1.2
Type-A Four-Wheel Truck ............................................................................................... H2.2
Tongue Or Handle for Type-A Truck ................................................................................ H2.2
Rigid Fork for Type-A Truck ............................................................................................ H2.3
Pivot Fork for Type-A Truck ............................................................................................ H2.3
Counterweight for Four-Wheel Truck ............................................................................... H2.3
Type-A Crane................................................................................................................. H3.2
Fluid-Type Protractor for Types A and E Cranes ............................................................... H3.2
Plastic Protractor Tube for Types A and E Cranes ............................................................. H3.3
Standoff Latch for Type-A Crane ..................................................................................... H3.3
Polyethylene Outer and Inner Sheave.............................................................................. H3.3
Adaptor for Type-A Crane ............................................................................................... H3.4
Type-E Heavy-Duty Truck ............................................................................................... H4.2
Tongue Or Handle for Type-E Truck ................................................................................ H4.2
Swivel Fork for Type-E Truck .......................................................................................... H4.2
Rigid Fork for Type-E Truck ............................................................................................ H4.3
Lock Handle Assembly for E-Truck................................................................................... H4.3
Type-E Crane ................................................................................................................. H5.2
Boom Extension for Type-E Crane ................................................................................... H5.2
Outer Sheave Shaft for Type-E Crane (For Brass Sheave) ................................................. H5.3
Shaft Insulator Bushing for Type-E Crane ........................................................................ H5.3
Outer Sheave Shaft for Type-E Crane (For Polymer Sheave) ............................................. H5.3
Bridge Board with Support Assembly ............................................................................... H6.2
Roller for Bridge Board ................................................................................................... H6.2
Bridge Board (Footrest) Support Assembly....................................................................... H6.3
Section H

H1 Three Three-Wheel Three Wheel Base Base
H1.1
Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board

Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board
THREE-WHEEL BASE
2501001
When attached to a Type-A Crane, the Type-A three-wheel base becomes the commonly
used three-wheel bridge-measuring outfit. The Type-A three-wheel base consists of a twowheel
base assembly and a third (roadside) wheel with all necessary chassis components.
The two-wheel subassembly is collapsible to store compactly (by removing two 3/8-inch
wing nuts). This unit is easier to set up and is more maneuverable than the four-wheel
truck and operates in a narrower space. The approximate weight of the truck is 25 pounds.
The three-wheel base is not recommended for use with weights above 100
pounds.
THREE-WHEEL BASE
STAND
2501002
The stand for the three-wheel base prevents the base from sliding away from the bridge
rail when the crane is tipped against it. They are bolted to the outside of the two-wheel
portion of the base. Stand sold only as a pair.
H1.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

H2 Type Type-A Type A Four Four-Wheel Four
Wheel Truck
H2.1
Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board

Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board
TYPE-A FOUR-WHEEL
TRUCK
2502001
The Type-A Four-Wheel Truck provides a mobile base for the Type-A Crane. The road side
wheels are adjustable so that the platform surface will remain parallel to the road surface
when the truck is operated in areas with curbs, sidewalks, or other raised surfaces. The
front wheels swivel for steering. The tongue or handle is an assembly of galvanized pipe
that folds under the truck for storage. A maximum of four, 65-pound cast iron
counterweights (not provided, see Stock No. 2502006) may be used to counterbalance
heavier sounding weights. It is not recommended that the Type-A Four-Wheel
Truck be used with sounding weights greater than 100 pounds. The outside of
the frame measures 31 inches wide by 36 inches deep and weighs approximately 85
pounds.
SAFETY ISSUE: NO MORE THAN 4 COUNTERWEIGHTS SHOULD BE USED WITH THIS TRUCK.
TONGUE OR HANDLE
FOR TYPE-A TRUCK
2502002
Composed of galvanized pipe and fittings, the handle is used to pull the Type-A Truck into
position. By twisting the handle, it can be folded under the truck for storage.
H2.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

RIGID FORK FOR TYPE-A
TRUCK
2502004
Rigid fork for rear wheels of Type-A Truck. Provides support for mounting wheel to truck
frame. Does not allow wheel to pivot.
PIVOT FORK FOR TYPE-A
TRUCK
2502005
Pivot fork for front wheels of Type-A Truck. Provides support for mounting wheel to truck
frame. Allows front wheels to pivot for steering truck.
COUNTERWEIGHT FOR
FOUR-WHEEL TRUCK
2502006
Cast iron counterweight may be placed on the Type-A and Type-E Truck to counterbalance
heavier sounding weights. Counterweight weighs 65 pounds. A maximum of four
counterweights is recommended for the Type-A Truck, and a maximum of five is
recommended for the Type-E Truck.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 H2.3
Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board

Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board
Helpful, elpful,
Informative
nformative
Fact act
Another Benefit of the HIF Repair Program
MORE ECONOMICAL
Less expensive than manufacturers’ repair costs
H2.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

H3 Type Type-A Type A Crane
Crane
H3.1
Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board

Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board
TYPE-A CRANE
2503001
The Type-A Crane is a collapsible crane intended to measure discharge from a bridge. It is
attached either to the three-wheel base or the Type-A four-wheel truck. The crane
includes a reel mount drilled to accommodate A-55, B-56, and E-53 sounding reels. The
USGS 12-volt electrical power drive unit attaches to this crane with no adaptation. The
crane weighs approximately 45 pounds.
SAFETY ISSUE: USE OF THE E-53 REEL ON AN A-CRANE IS NOT RECOMMENDED. USE OF
SOUNDING WEIGHTS GREATER THAN 100 POUNDS IS NOT RECOMMENDED.
To To identify identify associated
associated
components components with with this this item,
item,
a a system system diagram diagram appears
appears
in in Section Section T, T, page page T T 1.8.
1.8.
FLUID-TYPE
PROTRACTOR FOR
TYPES A AND E CRANES
2503002
Protractor is used to measure the vertical angle of the sounding line from –25 degrees to
+90 degrees. It contains a liquid-filled plastic tube to easily determine the angle.
H3.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

PLASTIC PROTRACTOR
TUBE FOR TYPES A AND
E CRANES
2503003
Replacement tube filled with colored liquid for the fluid-type protractor.
STANDOFF LATCH FOR
TYPE-A CRANE
2503007
Prevents the crane from folding by keeping the bottom bar spread.
POLYETHYLENE OUTER
AND INNER SHEAVE
2503008
Replacement polyethylene cable-guiding sheave for Types-A and E cranes.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 H3.3
Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board

Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board
ADAPTOR FOR TYPE-A
CRANE
2501003
This adaptor is used on the Type-A Crane with a three-wheel base. It is intended for use
on bridges that have an offset (approximately 7 inches) at the bottom of the concrete
guardrail. This offset causes the base to lean too far, which makes it unstable and
dangerous to use. When installed on a Type-A Crane, this adaptor realigns the crane
parallel to the guardrail.
The adaptor is constructed from aluminum angles (1-1/2 by 1-1/4 by 1/4 inches), a
support rod, and attachment hardware (same as power drive mount). The unit easily
attaches to the crane.
View of adaptor mounted on Type-A Crane
H3.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

H4 Type Type-E Type E Heavy Heavy-Duty Heavy Duty Truck
H4.1
Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board

Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board
TYPE-E HEAVY-DUTY
TRUCK
2504001
The Type-E Heavy-Duty Truck is used with the Type-E Crane when making discharge
measurements where heavy sounding weights are required. Wheel height is not
adjustable. The front wheels swivel for steering. The tongue or handle is an assembly of
galvanized pipe that folds under the truck for storage. A maximum of five, 65-pound cast
iron counterweights (not provided, see Stock No. 2502006) may be used to counterbalance
heavier sounding weights. The outside of the frame measures 34 inches wide by 42 inches
deep and weighs approximately 100 pounds.
TONGUE OR HANDLE
FOR TYPE-E TRUCK
2504002
Composed of galvanized pipe and fittings, the handle is used to pull the Type-E Truck into
position. By twisting the handle, it can be folded under the truck for storage.
SWIVEL FORK FOR
TYPE-E TRUCK
2504006
Swivel fork for front wheels of Type-E Truck. Provides support for mounting wheel to truck
frame. Allows front wheels to swivel for steering truck.
H4.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

RIGID FORK FOR TYPE-E
TRUCK
2504007
Rigid fork for rear wheels of Type-E Truck. Provides support for mounting wheel to truck
frame. Does not allow wheel to swivel.
LOCK HANDLE
ASSEMBLY FOR
E-TRUCK
2504010
Assembly is used to help lock the E-Crane to the truck. When properly installed on the lock
handle assembly, the crane can safely be tilted over the bridge rail.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 H4.3
Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board

Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board
Handy, andy,
Informative
nformative
Fact act act
Another Benefit of the HIF Warehouse
Did you know?
90 % of all orders are shipped within 1 day of
receiving the orders
H4.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

H5 Type Type-E Type E Heavy Heavy-Duty
Heavy Duty Crane
H5.1
Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board

Three-Wheel
Base
Type-A Four-
Wheel Truck
Bridge Board Type-E Heavy- Type-E Heavy-
Type-A Crane
Duty Crane
Duty Truck
TYPE-E CRANE
2505001
The Type-E Crane is used with the Type-E Truck when making discharge measurements
where heavy weights are required. The crane is sold complete with a protractor to measure
the vertical angle of the sounding line from -25 to +90 degrees. The reel mount is drilled
to accept A-55, B-56, or E-53 sounding reels. The power drive unit clamps directly to the
crane assembly. This crane is recommended for use with sounding weights of 100 pounds
or greater. The crane weighs approximately 60 pounds.
To To identify identify associated
associated
components components with with this this item,
item,
a a system system system diagram diagram appears
appears
in in Section Section T, T, page page page T T 1.8.
1.8.
BOOM EXTENSION FOR
TYPE-E CRANE
2505007
Boom extension for Type-E Crane. Used to extend the reach of the E-crane boom
18 inches when additional clearance is required.
H5.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

.
For use with brass sheave only.
For use only with Stock No. 2505008.
OUTER SHEAVE SHAFT
FOR TYPE-E CRANE
(FOR BRASS SHEAVE)
2505008
SHAFT INSULATOR
BUSHING FOR
TYPE-E CRANE
2505009
OUTER SHEAVE SHAFT
FOR TYPE-E CRANE
(FOR POLYMER SHEAVE)
2505010
Outer sheave shaft for Type-E Crane. For use with polymer sheave only.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 H5.3
Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board

Three-Wheel
Base
Type-A Four-
Wheel Truck
Bridge Board Type-E Heavy- Type-E Heavy-
Type-A Crane
Duty Crane
Duty Truck
Handy, andy,
Informative
nformative
Fact act act
Another Benefit of the HIF Warehouse
Did you know?
50% of all orders are shipped on the same day the
order is received
H5.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

H6 Bridge Bridge Board
Board
H6.1
Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board

Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board
BRIDGE BOARD WITH
SUPPORT ASSEMBLY
2701001
The bridge board is designed for use on bridges when making discharge measurements or
obtaining water-quality samples. An adjustable footrest is provided. The bridge board can
accommodate the A-Pack, A-55, and B-56 Reels and sounding weights up to 75 pounds.
The bridge board assembly weighs 11 pounds.
SAFETY HINT: USE OF THE E-53 REEL ON A BRIDGE BOARD IS NOT RECOMMENDED. DO NOT
USE WEIGHTS IN EXCESS OF 75 POUNDS WITH A BRIDGE BOARD.
To To identify identify associated
associated
components components with with this this item,
item,
a a system system diagram diagram appears
appears
in in Section Section Section T, T, page page page T T 1.7.
1.7.
ROLLER FOR BRIDGE
BOARD
2701002
Attaches to bridge board frame where it touches the bridge guardrail. Allows bridge board
to roll along bridge guardrail.
H6.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

BRIDGE BOARD
(FOOTREST) SUPPORT
ASSEMBLY
2701003
Supports the rear of the bridge board to prevent the bridge board from tipping over during use.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 H6.3
Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board

Three-Wheel
Base
Type-A Four-
Wheel Truck
Type-A Crane
Type-E Heavy-
Duty Truck
Type-E Heavy-
Duty Crane
Bridge Board
Heightened eightened
Item tem
Focus ocus
Another Benefit of the HIF Warehouse
Did you know?
There are over 900 different items stocked in the
HIF Warehouse
H6.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

I Cable Cars and Accessories
• I1 Cable Cars
• I2 Cable Car Accessories
• I3 Cableway Anchor Bar and Accessories
Section I
Cable Cars and Accessories

Cable Cars and Accessories
SECTION CONTENTS
Stand-Up Cable Car ......................................................................................................I1.2
Sit-Down Cable Car ......................................................................................................I1.3
Follower Brake Belt ......................................................................................................I2.2
Brass Cable-Car Sheave ................................................................................................I2.2
Brass Sounding-Line Sheave .........................................................................................I2.2
Cable-Car Protractor.....................................................................................................I2.3
Stand-Up Cable-Car Sample Case Retainer Kit................................................................I2.3
Top Rail Assembly for Cable Cars ..................................................................................I2.3
Brake Band for Follower Brake ......................................................................................I2.4
Sandpoint Brake ...........................................................................................................I2.4
Top Plate with Clamp ...................................................................................................I2.4
Sandpoint Brake without Top Plate ................................................................................I2.5
Brake Pads for Sandpoint Brake ....................................................................................I2.5
Retro-Fit Kit for Stand-Up Cable Car ..............................................................................I2.5
Sit-Down Cable Car Sample Case Retainer Kit ................................................................I2.6
Follower Brake-Type Cable-Car Puller ............................................................................I2.6
Roller for Follower Brake Type ......................................................................................I2.7
Brake Shoe for Follower Brake Type ..............................................................................I2.7
Cable-Car Puller ..........................................................................................................I2.7
Brake Belt....................................................................................................................I2.8
Cable-Car Hook ............................................................................................................I2.8
Cable Clamp ................................................................................................................I2.9
Shield for Cobralink SL High-Security Lock.....................................................................I2.9
Cableway Anchor Bar ...................................................................................................I3.2
Wire Rope Sheave ........................................................................................................I3.2
Cable Clip ...................................................................................................................I3.3
Galvanized Steel Thimble..............................................................................................I3.3
Turnbuckle ..................................................................................................................I3.4
A-Frame and Attachments Drawing Package ..................................................................I3.4
Section I

I1 Cable Cars
I1.1
Cable Cars Cable Car Accessories Cableway Anchor
Bar & Accessories

Cable Cars
Cable Car Accessories
Cableway Anchor Bar
and Accessories
STAND-UP CABLE CAR
2601001
The Stand-Up Cable Car is designed for cable spans greater than 400 feet, when heavier
weights are used, or when it is necessary to move around in the cable car. The cable
sheaves, from which the cable car is suspended on the cableway, will accommodate cables
up to 1.5 inches in diameter. The aluminum car measures 27 inches wide, 52 inches long,
and 73 inches from the cableway to the floor of the car. The reel seat is attached to the
structural members at one end of the car. A sheave, also attached to the structural
members above the reel seat, guides the sounding line so that the sounding weight and
meter will clear the floor of the car. A protractor attached near the sounding line sheave
allows the computation of the dry line correction when needed. The reel seat will
accommodate the A-Pack, A-55, B-56, and E-53 Reels, though the use of the A-Pack Reel
on this cable car is not recommended. The Sandpoint Brake is standard equipment on
all cable cars. Each cable car is shipped partially disassembled.
To identify associated
components with this item,
a system diagram appears
in Section T, page T 1.9.
I1.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

SIT-DOWN CABLE CAR
2602001
The Sit-Down Cable Car is designed for cable spans of less than 400 feet or when lighter
sounding weights will be used. The cable sheaves, from which the cable car is suspended on
the cableway, will accommodate cables up to 1.5 inches in diameter. The aluminum car
measures 21 inches wide, 60 inches long, and 55 inches from the cableway to the floor of
the car. The reel seat, mounted in the center of the car, will accommodate the A-Pack, A-55,
B-56, and E-53 Reels. Use of the E-53 Reel in the Sit-Down Cable Car is not
recommended. The Sandpoint Brake is standard equipment on all cable cars. Each cable
car is shipped partially disassembled.
To identify associated
components with this item,
a system diagram appears
in Section T, page T 1.9.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 I1.3
Cable Cars Cable Car Accessories Cableway Anchor Bar
and Accessories

Cable Cars
Cable Car Accessories
Cableway Anchor Bar
and Accessories
Helpful
Instrumentation
Facts
A Benefit for Field Techs
Did you know?
Section T includes system diagrams to
assist in choosing the correct components.
I1.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

I2 Cable Car Accessories
I2.1
Cable Cars
Cable Car Accessories
Cableway Anchor Bar Bar
and Accessories

Cable Cars
Cable Car Accessories
Cableway Anchor Bar
and Accessories
FOLLOWER BRAKE BELT
2601002
The fabric-reinforced rubber brake belt is for follower-type cable-car brake systems. It
attaches to the brass brake band (Stock No. 2601011.)
BRASS CABLE-CAR SHEAVE
2601003
This brass sheave is mounted on the top rail of the cable car and rolls along the cableway.
The cable car is suspended from this sheave allowing it to traverse the cableway. The
sheave fits both stand-up and sit-down cable cars and fits cables up to 1.5 inches in
diameter.
BRASS SOUNDING-LINE
SHEAVE
2601004
The sounding-line sheave is mounted to the cable car frame above the reel seat and guides
the sounding line away from the frame allowing the meter and sounding weight to clear
the floor of the cable car.
I2.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

CABLE-CAR PROTRACTOR
2601005
The protractor is mounted to the cable car frame. It is used to compute the dry line
correction when needed.
STAND-UP CABLE-CAR
SAMPLE CASE RETAINER KIT
2601006
Allows sample bottles to be secured to the side of the cable car in their shipping case.
Provides a convenient, out-of-the-way storage location for bottles as samples are collected.
TOP RAIL ASSEMBLY FOR
CABLE CARS
2601010
Top rail assembly, for both stand-up and sit-down cable car. Includes rails, brass sheaves,
Sandpoint brake, and protractor.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 I2.3
Cable Cars
Cable Car Accessories
Cableway Anchor Bar
and Accessories

Cable Cars
Cable Car Accessories
Cableway Anchor Bar
and Accessories
BRAKE BAND FOR
FOLLOWER BRAKE
2601011
Semicircular brass band to which the brake belt (Stock No. 2601002, not included) is
attached.
SANDPOINT BRAKE
2601012
The brake attaches to the top rails of a cable car. Two plates, pivoted at the top, hang
down, one on either side of the main suspension cable. A handwheel connects the two
plates. Turning the handwheel slows or stops the cable car as well as holding it securely in
position.
TOP PLATE WITH CLAMP
2601014
Top plate attaches to cable-car top rails and supports the Sandpoint brake.
I2.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Sandpoint brake without top plate.
Replacement brake pads and rivets for Sandpoint brake.
SANDPOINT BRAKE WITHOUT
TOP PLATE
2601018
BRAKE PADS FOR
SANDPOINT BRAKE
2601020
RETRO-FIT KIT FOR STAND-
UP CABLE CAR
2601030
Kit includes replacement structural members with accompanying hardware to provide
increased strength under maximum sounding reel loading conditions.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 I2.5
Cable Cars
Cable Car Accessories
Cableway Anchor Bar
and Accessories

Cable Cars
Cable Car Accessories
Cableway Anchor Bar
and Accessories
SIT-DOWN CABLE CAR
SAMPLE CASE RETAINER
KIT
2602002
Allows sample bottles to be secured to the side of the cable car in their shipping case.
Provides a convenient, out-of-the-way storage location for bottles as samples are collected.
FOLLOWER BRAKE-TYPE
CABLE-CAR PULLER
2603001
The Follower Brake-Type Cable-Car Puller provides a method of propelling the cable car
from one point to another along the cableway. The roller rides atop the cable and the
brake shoe rides below it. By pinching the cable between the puller’s roller and brake shoe,
and applying manual pressure, the car may be moved along the cable. The Follower Brake-
Type Cable-Car Puller is 16.5 inches long with a rubber handle to assist in gripping the
puller.
SAFETY HINT: THIS CABLE CAR PULLER SHOULD NOT BE USED TO HOLD THE CABLE CAR IN
POSITION.
PULLERS SHOULD NOT BE ATTACHED TO THE CABLE BEFORE OR DURING THE FREE FALL
MOVEMENT OF THE CABLE CAR. SERIOUS INJURY TO OPERATORS AND PASSENGERS MAY RESULT.
I2.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

ROLLER FOR FOLLOWER
BRAKE TYPE
2603002
BRAKE SHOE FOR FOLLOWER
BRAKE TYPE
2603003
CABLE-CAR PULLER
The cable-car puller functions as a gripping device allowing the operator to propel the
cable car from one point to another along the cableway. The puller consists of a one-piece
cast-aluminum body with a neoprene and rubber brake belt. The brake belt may be placed
between one of the cable car sheaves and the cable to prevent movement of the car along
the cable.
SAFETY HINT: PULLERS SHOULD NOT BE ATTACHED TO THE CABLE BEFORE OR DURING THE
FREE FALL MOVEMENT OF THE CABLE CAR. SERIOUS INJURY TO OPERATORS AND
PASSENGERS MAY RESULT.
Cable car pullers are available for three different size cables. They are as follows:
Description Stock Number
1-inch cable puller, extends 11-3/4-inches below cable when in use 2604001
1-1/4-inch cable puller, extends 12-3/4-inches below cable when in use 2605001
1-3/8-inch cable puller, extends 13-inches below cable when in use 2606001
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 I2.7
Cable Cars
Cable Car Accessories
Cableway Anchor Bar
and Accessories

Cable Cars
Cable Car Accessories
Cableway Anchor Bar
and Accessories
BRAKE BELT
2604003
Laminated rubber belting with brown neoprene friction-surface top and bottom.
CABLE-CAR HOOK
2607001
The Cable-Car Hook is used to secure the cable car, when not in use, to its parking place
on the cable. The hook is attached to the cable by two “U” Bolts (included) and a Cable
Clamp (Stock No. 2607002, not included). A 36-inch chain securing the cable car is
included with the hook. Any standard padlock (not included) may be used to secure the
chain to the cable car.
I2.8 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

CABLE CLAMP
2607002
The cable clamp is attached to the cable to assist in securing the cable car hook (Stock No.
2607001, not included). The clamp fits all cable diameters from 1-inch to 1-3/8-inch.
SHIELD FOR COBRALINK SL
HIGH-SECURITY LOCK
2608001
The shield is designed to provide protection from vandalism. The two-part shield consists
of a body and cover plate. The Cobralink lock is inserted through holes in the sides of the
shield body with the lock inside the shield. The cover plate is then positioned through the
slot in the side of the shield body and the hole in the cover aligned with the hole in the
body tab and locked with any standard padlock (not included).
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 I2.9
Cable Cars
Cable Car Accessories
Cableway Anchor Bar
and Accessories

Cable Cars
Cable Car Accessories
Cableway Anchor Bar
and Accessories
Hydrologic
Instrumentation
Feature
A Benefit of the HIF Testing Program
Did you know?
HIF is the only USGS facility to provide calibration
for hydrologic instrumentation
I2.10 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

I3 Cableway Anchor Bar and
Accessories
I3.1
Cable Cars
Cable Car Accessories
Cableway Anchor Bar
and Accessories

Cable Cars
Cable Car Accessories
Cableway Anchor Bar
and Accessories
CABLEWAY ANCHOR BAR
Cableway Anchor Bars are embedded in concrete mass or sidehill anchors and are used to
attach the cableway cable to the concrete anchor. These anchors are made of A-36
structural steel and the exposed portion has been hot-dip galvanized.
Diameter (inches) Length (inches) Stock Numbers
1 60 2609001
1 72 2609002
1-1/8 72 2609003
1-1/4 72 2609004
1-1/4 84 2609005
1-1/2 96 2609007
WIRE ROPE SHEAVE
Wire Rope Sheaves are designed to be used with steel A-Frames and wire rope. The
galvanized forged-steel sheave measures 12-inches in diameter at the rim, 9-1/2-inches at
the bottom of the grove, a 2-1/8-inch bore, and a 2-1/2-inch hub. Attachment pins are not
supplied with the sheaves.
SAFETY HINT:
• USE THIS SHEAVE ONLY WITH WIRE ROPE.
• USE THIS SHEAVE ONLY WITH STEEL A-FRAMES.
Cable Size (inches) Stock Number
3/4 2609010
7/8 2609011
1 2609012
I3.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

CABLE CLIP
Cable clips are used to hold two pieces of wire rope together. These heavy-duty clips are
made of galvanized forged steel, have rolled threads, and are painted with an anti-rust
coating. These cable clips meet Federal Specification FF-C-450D, Type 1, Class 1.
SAFETY HINT: CABLE CLIPS SHOULD ONLY BY USED WITH WIRE ROPE.
Wire Rope Diameter (inches) Stock Number
1/2 2609020
3/4 2609021
7/8 2609022
1 2609023
1 1/8 2609024
GALVANIZED STEEL THIMBLE
Thimbles are used to protect the eye or fastening loop of a wire ring. These thimbles meet
Federal Specification FF-T-276b, Type 3.
Wire Rope Diameter (inches) Stock Number
1/2 2609030
3/4 2609031
7/8 2609032
1 2609033
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 I3.3
Cable Cars
Cable Car Accessories
Cableway Anchor Bar
and Accessories

Cable Cars
Cable Car Accessories
Cableway Anchor Bar
and Accessories
TURNBUCKLE
Turnbuckles are used to adjust tension on a cableway. They are constructed of hot-dip
galvanized forged steel. Each turnbuckle has an eye on one end and a jaw-type end with a
pin on the other end. All meet Federal Specification FF-T-791b, Type 1, Form 1, Class 8.
Turnbuckles are available in various dimensions and working load limits. They are as
follows:
Description Stock Number
1-1/2-inch thread diameter, 24-inch adjustment length, 2609041
1-3/8-inch pin, working load limit is 21,400-pounds
1-3/4-inch thread diameter, 24-inch adjustment length, 2609042
1-5/8-inch pin, working load limit is 28,000-pounds.
A-FRAME AND ATTACHMENTS DRAWING PACKAGE
A-frame and attachments drawing package. Full-size blueprints (D-size sheets).
A-frame size Drawing List Number Stock Number
6 ft by14 ft 0505000 2609060
14 ft by 36 ft 0542000 2609065
I3.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

J Stopwatch, Stopwatch, Headphone, Headphone, CMD CMD CMD & &
&
Accessories
Accessories
•= J1 Stopwatch and Accessories
•= J2 Headphone and Accessories
•= J3 CMD and Accessories
•= J4 Discharge Measurement Expert (DMXpert)
Section J
Stopwatch, Headphone, CMD and Accessories

Stopwatch, Headphone, CMD and Accessories
SECTION CONTENTS
Mechanical Stopwatch .......................................................................................................J1.2
Stopwatch Holder..............................................................................................................J1.2
Stopwatch Holder Strap .....................................................................................................J1.2
Headphone Assembly ........................................................................................................J2.2
Female Telephone-Type Connector.....................................................................................J2.2
Male Telephone-Type Connector ........................................................................................J2.3
Ear Cushion For Headphone...............................................................................................J2.3
Current-Meter Digitizer ......................................................................................................J3.2
Cigarette-Lighter Battery Charger Cable..............................................................................J3.2
Switch Closure Cable .........................................................................................................J3.2
Optic Cable For Current-Meter Digitizer...............................................................................J3.3
AC Wall Charger For Current-Meter Digitizer .......................................................................J3.3
Mounting Bracket ..............................................................................................................J3.3
Discharge Measurement Expert (DMXpert)..........................................................................J4.2
Section J

J1 Stopwatch Stopwatch and and Accessories
Accessories
J1.1
Stopwatch and
Accessories
Headphone and
Accessories
CMD and Accessories
Discharge Measurement
Expert (DMXpert)

Stopwatch and
Accessories
Headphone and
Accessories
CMD and Accessories
Discharge Measurement
Expert (DMXpert)
MECHANICAL STOPWATCH
3101001
A high-quality, seven-jewel, split-second, non-magnetic stopwatch. The dial is graduated
in 1/5-second increments with a 30-minute counter. The single-action, pushbutton
control starts, stops, or returns hands to zero. The dial is white enamel on metal. The
case is rust- and water-resistant. The stem-wound mechanism is dustproof and
shockproof. The outside diameter is 2.25 inches; the weight is 3.4 ounces.
STOPWATCH HOLDER
3101002
Leather watch holder for 2-inch diameter stopwatches. Enables users to wear the
stopwatch on their wrist. Leather strap (Stock No. 3101003) must be ordered
separately.
STOPWATCH HOLDER
STRAP
3101003
Leather strap used with stopwatch holder (Stock No. 3101002) to secure the stopwatch
to the wrist.
J1.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

J2 Headphone Headphone and and Accessories
J2.1
Stopwatch and
Accessories
Headphone and
Accessories
CMD and Accessories Discharge Measurement
Expert (DMXpert)

Stopwatch and
Accessories
Headphone and
Accessories
CMD and Accessories
Discharge Measurement
Expert (DMXpert)
HEADPHONE ASSEMBLY
3201001
The headphone converts the signal generated by the current meter into an audible static
click, which may be counted by the streamgager. Consisting of a single earphone with a
headband and soft rubber ear cushion, battery case, and a 6-foot coiled cord between
the battery case and the M641/4-1 telephone-type connector, the headphone is
powered by a single 1.5-volt AA battery (not included). The 8-ohm earphone provides
good sensitivity under all field conditions.
FEMALE TELEPHONE-TYPE
CONNECTOR
3201002
Telephone-type connector, model number M641/4-1, is used as a quick disconnect
connector when used in conjunction with male connector, model number M642/3-1, for
headphones and other equipment used in streamgaging. While not waterproof, the
operation of this connector is not adversely affected by rainfall, snow, or immersion in
water for a short period of time.
J2.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

MALE TELEPHONE-TYPE
CONNECTOR
3201003
Telephone-type connector, model number M642/3-1, is used as a quick disconnect
connector when used in conjunction with female connector, model number M641/4-1,
for headphones and other equipment used in streamgaging. While not waterproof, the
operation of this connector is not adversely affected by rainfall, snow, or immersion in
water for a short period of time.
EAR CUSHION FOR
HEADPHONE
3201007
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 J2.3
Stopwatch and
Accessories
Headphone and
Accessories
CMD and Accessories
Discharge Measurement
Expert (DMXpert)

Stopwatch and
Accessories
Headphone and
Accessories
CMD and Accessories
Discharge Measurement
Expert (DMXpert)
Helpful, elpful, elpful,
Instructional
nstructional
Feature eature
Another Benefit of HIF Customer Support
Did you know?
Training can be provided in your office or at HIF for
one employee or for many
J2.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

J3 CMD MD and Accessories
Accessories
Accessories
J3.1
Stopwatch and
Accessories
Headphone and
Accessories
CMD and Accessories Discharge Measurement
Expert (DMXpert)

Stopwatch and
Accessories
Headphone and
Accessories
CMD and Accessories
Discharge Measurement
Expert (DMXpert)
CURRENT-METER
DIGITIZER
3202001
The Current-Meter Digitizer (CMD) is a battery powered, microprocessor controlled,
velocity measurement instrument designed to replace the headphone, stopwatch, and
rating table used in making discharge measurements with current meters. The CMD
counts electrical contacts from the Price AA, Pygmy, and Ice Meters, and optical closures
from the Optic AA. A buzzer produces an audible signal for each electrical contact or
optical closure. The display shows the elapsed time and total counts for each point
velocity measurement. The CMD will also compute the velocity from the standard rating
table for the meter being used and will display that value. Each unit is supplied with a
cigarette-lighter battery charger, AC wall charger, switch closure cable, optic closure
cable, mounting bracket and strap. (Batteries are not included.)
FYI: A HIF-repairable stock item.
CIGARETTE-LIGHTER
BATTERY CHARGER CABLE
3202003
Allows rechargeable batteries in CMD to be recharged when plugged into a vehicle’s
cigarette lighter or a power outlet.
SWITCH CLOSURE CABLE
3202004
Allows the current-meter digitizer to receive electrical contact closures from the Price AA,
Pygmy, and Ice Meters when using a wading rod or sounding reel.
J3.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

OPTIC CABLE FOR
CURRENT-METER
DIGITIZER
3202005
Allows the current-meter digitizer to receive optic closures from Optic AA meter when
using a wading rod or sounding reel.
AC WALL CHARGER FOR
CURRENT-METER
DIGITIZER
3202006
Allows rechargeable batteries in CMD to be recharged when plugged into a standard
110-volt wall outlet.
MOUNTING BRACKET
3202007
Bracket supports CMD when used with a wading rod. Adjustable bracket allows the
CMD to be raised, lowered, or swiveled for best viewing angle.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 J3.3
Stopwatch and
Accessories
Headphone and
Accessories
CMD and Accessories Discharge Measurement
Expert (DMXpert)

Stopwatch and
Accessories
Headphone and
Accessories
CMD and Accessories
Discharge Measurement
Expert (DMXpert)
Hastened! astened! astened!
Intensive! ntensive!
Fast! ast! ast!
Another Benefit of the HIF Repair Program
***FAST!***
Rapid repair times – usually less than 2 weeks
J3.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

J4 Discharge Discharge Measurement Measurement Expert
Expert
(DMXpert)
(DMXpert)
J4.1
Stopwatch and
Accessories
Headphone and
Accessories
CMD and Accessories
Discharge Measurement
Expert (DMXpert)

Stopwatch and
Accessories
Headphone and
Accessories
CMD and Accessories
Discharge Measurement
Expert (DMXpert)
DISCHARGE
MEASUREMENT EXPERT
(DMXpert)
3202025
The Discharge Measurement Expert (DMXpert) is a computer based discharge measurement
recorder developed under contract to the USGS by Sutron Corporation. It replaces the standard
measurement sheet, clipboard, stopwatch (or electronic counter) and pencil commonly used by
streamgagers to record flow observations during a discharge measurement. The discharge
measurement techniques described in USGS Water Supply Paper 2175, Measurement and
Computation of Streamflow, Volume 1, Chapter 5, Measurement of Stage and Discharge were
followed during the development of the DMX. Eight AA batteries (not included) supply power. For
operation in temperatures of -20 degrees Celsius and below, it is recommended that AA lithium
batteries be used. The DMX uses the same mounting bracket as the Current Meter Digitizer (CMD)
which allows easy attachment to the standard USGS Top Setting Wading Rod (Stock No. 2101001).
Units supplied by the HIF include the mounting bracket, a meter interface cable, a computer
interface cable, and a carrying case. All DMXperts supplied by the HIF are equipped with the 1999
Standard Meter Rating number 2 for AA and Pygmy Current Meters.
FYI: Save time and money on repairs for this item: Return to the HIF.
J4.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

K Sounding Weights and Accessories
• K1 Sounding Weights
• K2 Sounding Weight Accessories
Section K
Sounding Weights and Accessories

Sounding Weights and Accessories
SECTION CONTENTS
15-Pound Sounding Weight ......................................................................................... K1.2
Lead Sounding Weights ............................................................................................... K1.2
Columbus Weight Hanger ............................................................................................ K2.2
Heavy Weight Hanger (3/4 inch wide) .......................................................................... K2.2
Heavy Weight Hanger (1-1/2 inch wide) ....................................................................... K2.2
Weight Pins ................................................................................................................ K2.3
Sounding Weight Carriers ............................................................................................ K2.3
Tilting Harness............................................................................................................ K2.4
Section K

K1 Sounding Weights
K1.1
Sounding Weights Sounding Weight Accessories

Sounding Weights
Sounding Weight Accessories
15-POUND SOUNDING
WEIGHT
3301001
Sounding weights are used when discharge measurements are made using cable
suspension. The sounding weight is positioned below the meter to hold it vertically in the
water. They are streamlined to reduce turbulence and are longer than the current meter
which offers the meter some protection from submerged obstacles. A vertical slot and a
drilled horizontal hole in each weight accommodate the hanger bar and the weight pin. The
15-pound sounding weight is made of leaded red brass.
LEAD SOUNDING WEIGHTS
Sounding weights are used when discharge measurements are made using cable
suspension. The sounding weight is positioned below the meter to hold it vertical in the
water. They are streamlined to reduce turbulence and are longer than the current meter
which offers the meter some protection from submerged obstacles. A vertical slot and a
drilled horizontal hole in each weight accommodate the hanger bar and the weight pin.
Lead weights have aluminum tail fins and come in various sizes. They are as follows:
Weight (in pounds) Stock Number
30 3301002
50 3301003
75 3301004
100 3301005
150 3301006
Sounding weights of 200 pounds and 300 pounds are available by special order. Call the
HIF for ordering information.
K1.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

K2 Sounding Weight Accessories
K2.1
Sounding Weights
Sounding Weight Accessories

Sounding Weight Accessories Sounding Weights
COLUMBUS WEIGHT
HANGER
3302001
The stainless steel weight hanger is attached to the end of the sounding line with a
connector. The meter and sounding weight are suspended from it. The Columbus Weight
Hanger will support the 15-, 30-, 50-, 75-, 100-, and 150-pound sounding weights.
HEAVY WEIGHT HANGER
(3/4 INCH WIDE)
3302002
The stainless steel weight hanger is attached to the end of the sounding line with a
connector. The meter and sounding weight are suspended from it. The Heavy Weight
Hanger is ¾-inch wide and will support the 200-pound and 300-pound sounding weights.
HEAVY WEIGHT HANGER
(1-1/2 INCH WIDE)
3302003
The stainless steel weight hanger is attached to the end of the sounding line with a
connector. The meter and sounding weight are suspended from it. The Heavy Weight
Hanger is 1-1/2 inches wide and will support the 200-pound and 300-pound sounding
weights that have the slot extended to accommodate the greater width.
K2.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

WEIGHT PINS
Weight pins are designed to attach the sounding weight to the weight hanger. The stainless
steel pins are threaded on one end to screw into the weight hanger and slotted on the
other to accept a slotted screwdriver. Each sounding weight has a corresponding pin. They
are as follows:
Weight Pin for Indicated Weight
(in pounds) Stock Number
15 3303001
30 3303002
50 3303002
75 3303003
100 3303003
150 3303004
200 3303005
300 3303006
SOUNDING WEIGHT
CARRIERS
Weight racks are intended to be securely bolted to the floor of field vehicles as a safe
means of carrying sounding weights. The racks are made of heavy steel, with outside
dimensions of 4 inches high, 18 inches long, and 11 inches wide, and have welded
brackets to hold Columbus sounding weights. The weight racks are available in two
sizes as listed:
Carrier Weight Capacity
(in pounds) Stock Number
30 and 100 3304001
50 and 75 3304002
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 K2.3
Sounding Weights Sounding Weight Accessories

Sounding Weight Accessories Sounding Weights
TILTING HARNESS
3305001
Tilts the sounding weight to allow it to be lowered through an 8-inch hole in the ice cover.
This harness is for a 30-pound weight.
K2.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

L Digital Digital Recorders Recorders Recorders (ADR’s) (ADR’s) and
and
Accessories
Accessories
•= L1 F&P Model 1542 Recorder
•= L2 L&S Model 7000 Recorder
•= L3 Model III Timer
•= L4 Jackshafts and Sprockets
•= L5 ADR Paper Tapes
Section L
Digital Recorders (ADR’S) and Accessories

Model Model 1542 1542
Recorder
Digital Recorders (ADR’S) and Accessories
ADR Tape Paper Jack Shafts, Chains, Model III Timer
L & S Model
and Sprockets
Recorder
SECTION CONTENTS
F&P Model 1542 Recorder......................................................................................................L1.2
F&P Model 1542 Recorder with Telekit....................................................................................L1.2
12-Volt Drive Motor for F&P Recorder.....................................................................................L1.3
Microswitch for F&P Recorder.................................................................................................L1.3
Punch Pins for F&P Recorder..................................................................................................L1.3
Shipping Boxes for F&P Recorder ...........................................................................................L1.3
Shipping Box for L&S Recorder...............................................................................................L1.4
L&S Model 7000 Recorder......................................................................................................L2.2
L&S Model 7000 Recorder with Module A for DCP Interface .....................................................L2.2
L&S Model 7000 Recorder with Digital Input/Output................................................................L2.3
Test Box for L&S Input/Output Recorder.................................................................................L2.3
Model III Timer.....................................................................................................................L3.2
Jackshaft .............................................................................................................................L4.2
Sprockets..............................................................................................................................L4.2
Sprocket Hubs.......................................................................................................................L4.3
ADR Paper Tape....................................................................................................................L5.2
Multiparameter ADR Paper Tape ............................................................................................L5.2
Paper Tape Storage Box ........................................................................................................L5.3
Section L

L1 Model Model 1542 1542 Recorder
Recorder
L1.1
Model 1542
Jackshafts and
Recorder L&S Model 7000
Model III Timer
Sprockets
ADR Paper Tapes
Recorder

Model Model 1542 1542
Recorder
L&S Model 7000
Recorder
Model III Timer
Jackshafts and
Sprockets
Cableway Anchor Bar
ADR and Paper Accessories Tapes
F&P MODEL 1542
RECORDER
5101001
The Fischer-Porter (F&P) model 1542 Analog-to-Digital Recorder (ADR) converts angular shaft positions
into coded digital data and records this information as a pattern of punched holes in paper tape for
computer processing. The input shaft is driven by a float tape or chain drive from a manometer. One
revolution of the input shaft represents a 1.0-foot range. The recorder is powered by a 12-volt dc
power source.
The recorder measures 12-1/8 inches wide by 13-5/16 inches deep by 14-7/16 inches high and weighs
approximately 25 pounds. An external timer is included with the recorder.
FYI: A HIF-repairable stock item.
F&P MODEL 1542
RECORDER WITH TELEKIT
5101002
The Fischer-Porter (F&P) model 1542 Analog-to-Digital Recorder (ADR) converts angular shaft positions
into coded digital data and records this information as a pattern of punched holes in paper tape for
computer processing. The input shaft is driven by a float tape or chain drive from a manometer. One
revolution of the input shaft represents a 1.0-foot range. The recorder is powered by a 12-volt dc
power source.
The Fischer-Porter model 1542 with telekit provides an electrical output compatible with several remote
telemetry devices for telephone line or satellite transmission. The telemetry memory is updated at each
punch cycle and is available for transmission until the next punch cycle. Telemetry equipment is not
included. Call (800) 382-0634 for procurement information.
The recorder measures 12-1/8 inches wide by 13-5/16 inches deep by 14-7/16 inches high and it
weighs approximately 25 pounds. An external timer is included with the recorder.
L1.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

12-VOLT DRIVE MOTOR FOR
F&P RECORDER
5101004
MICROSWITCH FOR F&P
RECORDER
5101005
PUNCH PINS FOR F&P
RECORDER
5101006
SHIPPING BOXES FOR F&P
RECORDER
5101007
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 L1.3
Model 1542
Recorder
L&S Model 7000
Recorder
Model III Timer
Jackshafts and
Sprockets
ADR Paper Tapes

Model Model 1542 1542
Recorder
L&S Model 7000
Recorder
Model III Timer
Jackshafts and
Sprockets
Cableway Anchor Bar
ADR and Paper Accessories Tapes
SHIPPING BOX FOR L&S
RECORDER
5101008
L1.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

L2 L&S L&S Model Model 7000 7000 Recorder
Recorder
L2.1
Model 1542
Recorder
L&S Model 7000
Recorder
Model III Timer
Jackshafts and
Sprockets
ADR Paper Tapes

Model Model 1542 1542
Recorder Recorder
L&S Model 7000
Recorder
Model III Timer
Jackshafts and
Sprockets
Cableway Anchor Bar
ADR and Paper Accessories Tapes
L&S MODEL 7000
RECORDER
5102001
The Leupold and Stevens (L&S) model 7000 Analog-to-Digital Recorder (ADR) converts angular shaft
positions into coded digital data and records this information as a pattern of punched holes in paper
tape for computer processing. The input shaft is driven by a float tape or chain drive from a
manometer. One revolution of the input shaft represents a 1.0-foot range. The recorder uses a 12-volt
dc power source.
Recorder measures 9 inches wide by 14 inches deep by 13 inches high and weighs approximately 13
pounds. An external timer is included in the recorder. FYI: Save time and money by letting HIF’s
expert technicians repair this stock item.
L&S MODEL 7000
RECORDER WITH MODULE A
FOR DCP INTERFACE
5102002
The Leupold and Stevens model 7000 Analog-to-Digital Recorder (ADR) converts angular shaft
positions into coded digital data and records this information as a pattern of punched holes in paper
tape for computer processing. The input shaft is driven by a float tape or chain drive from a
manometer. One revolution of the input shaft represents a 1.0-foot range. The recorder uses a 12-volt
dc power source.
The Leupold and Stevens model 7000 with module A provides an electrical output compatible with
several remote telemetry devices for telephone line or satellite transmission. The telemetry memory is
updated at each punch cycle and is available for transmission until the next punch cycle. Telemetry
equipment is not included. Call (800) 382-0634 for procurement information.
Recorder measures 9 inches wide by 14 inches deep by 13 inches high and weighs approximately 13
pounds. An external timer is included in the recorder.
FYI: This stock item is repairable by HIF’s expert technicians.
L2.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

L&S MODEL 7000 RECORDER
WITH DIGITAL
INPUT/OUTPUT
5102003
The Leupold and Stevens model 7000 Analog-to-Digital Recorder (ADR) converts angular shaft
positions into coded digital data and records this information as a pattern of punched holes in paper
tape for computer processing. The input shaft is driven by a float tape or chain drive from a
manometer. One revolution of the input shaft represents a 1.0-foot range. The recorder uses a 12-volt
dc power source.
The Leupold and Stevens model 7000 with input/output (I/0) has had the input shaft removed and
replaced with an electronics package that receives electrical input signals and operates the punch
assembly. This model is required with U.S. Geological Survey flow-through and minimonitors as well as
several other sensing devices.
Recorder measures 9 inches wide by 14 inches deep by 13 inches high and weighs approximately 13
pounds. An external timer is included with the recorder.
FYI: This stock item is repairable by the HIF.
TEST BOX FOR L&S
INPUT/OUTPUT RECORDER
5102005
Test box is used to determine if the L&S Input/Output recorder is operating properly by allowing the
user to input test data and have the recorder record it. The box may also be used to check the
recorder for excessive current draw.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 L2.3
Model 1542
Recorder
L&S Model 7000
Recorder
Model III Timer
Jackshafts and
Sprockets
ADR Paper Tapes

Model Model 1542 1542
Recorder Recorder
L&S Model 7000
Recorder
Model III Timer
Jackshafts and
Sprockets
Cableway Anchor Bar
ADR and Paper Accessories Tapes
Heightened eightened eightened
Intense ntense
Focus ocus
Another Benefit of HIF Customer Support
--IN AN EMERGENCY--
Offers priority response to offices facing
emergency conditions
L2.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

L3 Model Model III III Timer
Timer
L3.1
Model 1542
Recorder
L&S Model 7000
Recorder
Model III Timer
Jackshafts and
Sprockets
ADR Paper Tapes

Model Model 1542 1542
Recorder
L&S Model 7000
Recorder
Model III Timer
Jackshafts and
Sprockets
ADR Paper Tapes
MODEL III TIMER
5303001
The model III timer is a 12-volt electronic timer which causes an ADR to punch on a 5-, 6-, 15-, 30-, or
60-minute cycle. It is accurate to 3 minutes per month. The timer may be used with either a Fisher-
Porter or Leupold and Stevens ADR.
FYI: Save time and money on repairs for this item: Return to the HIF.
L3.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

L4 Jackshafts Jackshafts and and Sprockets Sprockets
Sprockets
L4.1
Model 1542
Recorder
L&S Model 7000
Recorder
Jackshafts and
Model III Timer ADR Paper Tapes
Sprockets

Model Model 1542 1542
Recorder
L&S Model 7000
Recorder
Model III Timer
Jackshafts and
Sprockets
ADR Paper Tapes
JACKSHAFT
5304001
The jackshaft is used to offset the chain drive from a manometer or other sprocket-driven device to a
recorder when the sprockets cannot be properly aligned. The jackshaft is 12 inches long and has a 15tooth
sprocket on each end.
SPROCKETS
Description Stock Number
20-tooth sprocket with 1/2-inch diameter center hole. 5304010
10-tooth sprocket, 1:12 ADR to A-35. This 10-tooth 5304011
sprocket has 3 threaded holes so that it may be attached
to an analog-to-digital recorder.
20-tooth sprocket has 3 threaded holes so that it may 5304012
be attached to an analog-to-digital recorder.
15-tooth sprocket has a threaded center hole and 5304013
3 smooth-bore countersunk holes in a triangular pattern.
30-tooth sprocket has a threaded center hole and 3 5304014
smooth-bore countersunk holes in a triangular pattern.
L4.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

SPROCKET HUBS
Description Stock Number
Press-fit sprocket hub modifies 1/2-inch center hole to fit 5304015
1/4-inch shaft, used to modify any 1/2-inch-bore sprocket
such that it will attach to any 1/4-inch shaft.
Press-fit sprocket hub used to modify any 1/2-inch-bore 5304016
sprocket such that it will attach to any 5/16-inch shaft.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 L4.3
Model 1542
Recorder
L&S Model 7000
Recorder
Model III Timer
Jackshafts and
Sprockets
ADR Paper Tapes

Model Model 1542 1542
Recorder
L&S Model 7000
Recorder
Model III Timer
Jackshafts and
Sprockets
ADR Paper Tapes
Helpful, elpful,
Informative
nformative
nformative
Feature eature
Another Benefit of HIF Customer Support
Did you know?
Testing results and product information are
released quarterly through WRD Instrument News
L4.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

L5 ADR ADR Paper Paper Tapes
Tapes
L5.1
Model 1542
Recorder
L&S Model 7000
Recorder
Model III Timer
Jackshafts and
Sprockets
ADR Paper Tapes

Model 1542
Recorder
L&S Model 7000
Recorder
Model III Timer
Jackshafts and
Sprockets
ADR Paper Tapes
ADR PAPER TAPE
Digital recorder paper tape is used for recording data with a punching mechanism. Punched tape is
automatically read and translated onto magnetic tape. The paper tape is retained as a permanent
record. The HIF-stocked paper tape may be used on Fischer-Porter (model 1542) or Leupold & Stevens
(7000 series) digital recorders. Paper tape is available for time-cycle or multiparameter recording.
Paper tape storage boxes are used to store a 1-year's record of punched tapes.
Available in three different time cycles:
Cycles (Minutes) Stock Number
5 5308001
6 5308002
12 5308003
30 5308004
60 5308005
MULTIPARAMETER
ADR PAPER TAPE
Digital recorder paper tape is used for recording data with a punching mechanism. Punched tape is
automatically read and translated onto magnetic tape. The paper tape is retained as a permanent
record. The HIF-stocked paper tape may be used on Fischer-Porter (model 1542) or Leupold & Stevens
(7000 series) digital recorders. Paper tape is available for time-cycle or multiparameter recording.
Paper tape storage boxes are used to store a 1-year's record of punched tapes.
Description Stock Number
5 readouts per cycle 5308010
6 readouts per cycle 5308011
8 readouts per cycle 5308013
9 readouts per cycle 5308014
L5.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

PAPER TAPE STORAGE BOX
5308020
Paper tape storage boxes are used to store a 1-year's record of punched tapes. Box of 100.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 L5.3
Model 1542
Recorder
L&S Model 7000
Recorder
Model III Timer
Jackshafts and
Sprockets
ADR Paper Tapes

Model 1542
Recorder
L&S Model 7000
Recorder
Model III Timer
Jackshafts and
Sprockets
ADR Paper Tapes
Helpful! elpful! elpful!
Informative!
nformative!
Fast! ast!
Another Benefit of HIF Customer Support
**THE LATEST INFO**
Provides up-to-date instrument information easily
accessed through HIF web page:
wwwhif.er.usgs.gov/uo/
L5.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

M Data Loggers, Encoders & Accessories
• M1 Data Loggers
• M2 Data Logger Accessories
• M3 Interface Devices
• M4 Encoders
Section M
Data Loggers, Encoders and Accessories

Data Loggers, Encoders and Accessories
Model 80 Data Logger .................... M1.2
Model 80 Data Logger with Extended
Temperature Range................... M1.3
Model 301 Data Logger .................. M1.4
Model 320 Data Logger .................. M1.5
Model 555A Data Logger ................ M1.6
CR-10 Data Logger......................... M1.7
CR-10X Data Logger....................... M1.8
Model 8200A Data Logger .............. M1.9
Model 8200A Data Logger with
Phone/Speech Modem ..............M1.10
Model 8210 Data Logger
(without Goes) .........................M1.11
Model 8210 Data Logger with
Phone/Speech Modem ..............M1.12
GS-93A Water Level Monitoring
System ....................................M1.13
GS-93B Water Level Monitoring
System ....................................M1.14
8400 Data Logger (12K Reading) ..M1.15
8400 Data Logger (50K Reading) ..M1.16
H-510 Data Logger........................M1.17
Model 320 Environmental
Enclosure Kit ............................. M2.2
CR-10 Data Logger Environmental
Enclosure.................................. M2.2
PC-208W Software ......................... M2.3
PCMCIA Static Ram Card, 1 Meg ..... M2.3
8400 Data Card.............................. M2.3
GS-93 Data Card............................ M2.4
GS-93 Card Reader ........................ M2.4
GS-93 Software Diskette and
Manual ..................................... M2.4
8400 Card Reader .......................... M2.5
Keypad and Display Unit ................. M2.5
SM192 Storage Module................... M2.6
BDR 320 Power Cable with
Connector For Battery Cable ...... M2.6
9-Pin Communications Cable........... M2.6
Y Cable For Model 301
Data Logger .............................. M2.7
Section M
SECTION CONTENTS
Junction Box with Cables
(For Model 301 Data Logger) ..... M2.7
Junction Box To Battery Cable ........ M2.7
SDI-12 Junction Box Cable.............. M2.8
Analog Connector To Junction Box
Cable........................................ M2.8
Junction Box.................................. M2.8
SDI-12 Sensor Cable ...................... M2.9
Communications Cable ................... M2.9
Solderless 9-Pin 'D' Connector
(Male) ...................................... M2.9
Y Cable (For Model 80 Data
Logger) ...................................M2.10
Junction Box with Cables
(For Model 80 Data Logger) ......M2.10
Model 80 Data Logger Cable ..........M2.10
9- to 25-Pin Communication Cable .M2.11
3- to 9-Pin Communication Cable ...M2.11
H-510 Communication Cable ..........M2.12
CR-10 Temperature Interface ......... M3.2
CR-10 Conductivity Sensor
Interface................................... M3.2
CR-10 Conductivity Electrode
Assembly, Potted....................... M3.3
SC532 Interface ............................. M3.3
QD1 Interface ................................ M3.4
SC32A Interface ............................. M3.4
SDI Incremental Interface (LID) ..... M3.5
436A Encoder (with Incremental
Output) .................................... M4.2
436B Encoder (with SDI-12
Output) .................................... M4.2
436A/B Encoder (with Incremental
and SDI-12 Outputs) ................. M4.3
Maximum and Minimum Stage
Indicator................................... M4.3
436BD Encoder (with SDI-12
Output) .................................... M4.4
Stage Potentiometer....................... M4.4
Universal Shaft Encoder Cable ........ M4.5

M1 Data Loggers
M1.1
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Loggers
Data Logger Accessories
Interface Devices
Encoders
MODEL 80 DATA LOGGER
5201001
The Model 80 is a battery-powered electronic data logger manufactured by Environmental
Systems Corporation (ESC). The data logger can collect instantaneous readings as well as
averaged values and can monitor maximum and minimum readings. It does not have the
ability to carry out conditional operations or data manipulation. The Model 80 may be
programmed to accept data from up to four analog sensors and as many as 10 sensors
using SDI-12 at measurement intervals ranging from 1 second to 24 hours. Additionally,
the unit may be programmed to apply a single multiplier and offset value to each channel
to convert the collected data into the desired engineering units. The Model 80 has 128K of
on-board memory, which is expandable to 256K. It has an operating temperature of
–20 to 55 degrees Celsius. The front panel contains an RS-232 port as well as a liquid
crystal display (LCD) and three push-button switches which allow the user to review the
date, clock time, current sensor readings, and stored data. A laptop computer is required
to program the Model 80 and to retrieve stored data. Cables that are application
dependent must be ordered separately.
NOTE: THE MODEL 80 WITH EXTENDED TEMPERATURE RANGE (STOCK NO. 5201002), HAS
AN OPERATING TEMPERATURE OF -40 TO 60 DEGREES CELSIUS. IT IS OTHERWISE IDENT ICAL
TO THE STANDARD MODEL 80.
FYI: This stock item is repairable by HIF’s expert technicians.
M1.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

MODEL 80 DATA LOGGER
WITH EXTENDED
TEMPERATURE RANGE
5201002
The Model 80 with extended temperature range is a battery-powered electronic data logger
manufactured by Environmental Systems Corporation (ESC). The data logger can collect
instantaneous readings as well as averaged values and can monitor maximum and
minimum readings. It does not have the ability to carry out conditional operations or data
manipulation. The Model 80 may be programmed to accept data from up to four analog
sensors and as many as 10 sensors using SDI-12 at measurement intervals ranging from 1
second to 24 hours. Additionally, the unit may be programmed to apply a single multiplier
and offset value to each channel to convert the collected data into the desired engineering
units. The Model 80 has 128K of on-board memory, which is expandable to 256K. It has
an operating temperature of –40 to 60 degrees Celsius. The front panel contains
an RS-232 port as well as a liquid crystal display (LCD) and three push-button switches
which allow the user to review the date, clock time, current sensor readings, and stored
data. A laptop computer is required to program the Model 80 and to retrieve stored data.
Cables that are application dependent must be ordered separately.
NOTE: THE STANDARD MODEL 80 (STOCK NO. 5201001), HAS AN OPERATING TEMPERATURE
OF -20 TO 55 DEGREES CELSIUS. IT IS OTHERWISE IDENT ICAL TO THE MODEL 80 WITH
EXTENDED TEMPERATURE.
FYI: Save time and money by letting HIF’s expert technicians repair this stock item.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 M1.3
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Loggers
Data Logger Accessories
Interface Devices
Encoders
MODEL 301 DATA LOGGER
5202001
The Model 301 is a battery-powered Basic Data Recorder (BDR) manufactured by Campbell
Scientific, Inc. (CSI). The unit may be programmed to store instantaneous values,
averages, maximums, totals, or standard deviations with measurement intervals from 1
second to 24 hours. This BDR will accept data from two pulse-type or four single-ended
analog inputs and as many as 10 sensors using SDI-12. The Model 301 supports both the
prompt and direct programming methods. Prompt programming requires the user to
follow prompts displayed on the liquid crystal display (LCD) located on the front of the unit.
Direct programming requires the user to develop an operating program without assistance
from the BDR. The Model 301 has sufficient on-board memory to store approximately
15,000 data points. It has an operating temperature range of –35 to 55 degrees Celsius.
Two push buttons control the LCD display. A laptop computer is required to program the
Model 301 using the direct programming method and to retrieve stored data. Cables,
which are application dependent, must be ordered separately.
FYI: This stock item is repairable by HIF’s expert technicians.
M1.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

MODEL 320 DATA LOGGER
5202002
The Model 320 is a battery-powered Basic Data Recorder (BDR) manufactured by Campbell
Scientific, Inc. (CSI). The unit may be programmed to store instantaneous values,
averages, maximums, totals, or standard deviations with measurement intervals from 1
second to 24 hours. This BDR will accept data from two pulse-type or four single-ended
analog inputs and as many as 10 sensors using SDI-12. The Model 320 supports both the
prompt and direct programming methods. Prompt programming requires the user to install
the PC300 Data Logger Support Software, provided with each Model 320, on a personal
computer (PC) and then enter parameters based on prompts from the software. Direct
programming requires the user to develop an operating program without assistance from
the BDR. The Model 320 does not have a display. It has sufficient on-board memory to
store approximately 15,000 data points. It has an operating temperature range of –35 to
55 degrees Celsius. A laptop computer is required to program the Model 320 and to extract
the stored data. Cables, which are application dependent, must be ordered separately.
FYI: This stock item is repairable by the HIF.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 M1.5
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Loggers
Data Logger Accessories
Interface Devices
Encoders
MODEL 555A DATA
LOGGER
5202008
The Handar Model 555A is a multi-channel, programmable data logger. The unit accepts
input from a variety of devices including analog, digital, pulse-counter, switch-closure, SDI-
12, and frequency-type sensors. Output capabilities include eight digital outputs for
controlling sensors, two 12-volt outputs and a 5-volt output for powering sensors. The
Model 555A comes with 128 kilobytes of onboard memory for data storage. Power is
provided by a user-furnished 12-volt battery or an optional solar panel.
The unit offers a flexible programming technique that enables the user to perform
numerous measurement and data processing functions including conditional data logging,
event driven processes, data averaging, storing minimums/maximums, and other math
processes. The sample rate may be programmed from 1 second to 45 days. A computer
and the Handar software are required for programming the unit and/or data retrieval.
The unit is housed in a fiberglass enclosure that measures 9.0 inches by 10.5 inches by 6.5
inches and weighs approximately 7 pounds. All input/output connections are made through
a terminal strip panel on the front side of the unit. The operating temperature range of the
unit is -40 to 55 degrees Celsius.
FYI: Save time and money on repairs for this item: Return to the HIF.
M1.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

CR-10 DATA LOGGER
5203003
The CR-10 is a multiparameter data logger manufactured by Campbell Scientific, Inc. (CSI).
It will accept data from Model 80 SDI-12, 12 analog, and 2 pulse-sensor inputs and has
precision excitation outputs. This data logger has eight ports that may be individually
programmed for input or output. Data may be recorded at fixed intervals between 1/32 of
a second and 24 hours or at variable intervals. The CR-10 contains 96 KB of on-board
memory that may be expanded to 288 KB with the addition of the SM192 Storage Module
(Stock No. 5206003). This unit does not contain a display. Programming and data
retrieval are possible with the addition of the SC32A (Stock No. 5206006) and an external
computer. The CR-10 may be programmed with the keypad and display unit (Stock No.
5206001), however, collected data may not be reviewed using this device. This data
logger supports telemetry using Campbell’s custom modem. Cables, which are application
dependent, must be ordered separately.
NOTE: THE CR-10 IS SUPPORTED BY THE PFC SOFTWARE.
FYI: HIF repairable stock item.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 M1.7
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Loggers
Data Logger Accessories
Interface Devices
Encoders
CR-10X DATA LOGGER
5203010
The CR-10X is a multiparameter data logger manufactured by Campbell Scientific, Inc.
(CSI). It will accept data from Model 80 SDI-12, 12 analog, and two pulse-sensor inputs
and has precision excitation outputs. This data logger has eight ports, which may be
individually programmed for input or output. Data may be recorded at fixed intervals
between 1/32 of a second and 24 hours or at variable intervals. The CR-10X contains 1 MB
of on-board memory. This unit does not contain a display. Programming and data
retrieval are possible with the addition of the SC32A (Stock No. 5206006) and an external
computer. The CR-10X may be programmed with the keypad and display unit (Stock No.
5206001), however, collected data may not be reviewed using this device. The operating
temperature of the CR-10X is –55 to 85 degrees Celsius. All programs written for the CR-
10 are supported by the CR-10X. This data logger supports telemetry using Campbell’s
custom modem. Cables, which are application dependent, must be ordered separately.
NOTE: THE CR-10 IS SUPPORTED BY THE PFC SOFTWARE.
FYI: Save time and money on repairs for this item: Return to the HIF.
M1.8 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

MODEL 8200A DATA
LOGGER
5205002
The Model 8200A is a multiparameter data logger manufactured by Sutron Corporation. It
has 124K of on-board memory, which is expandable to 380K. The data logger accepts
inputs from counter, frequency, analog, RS-232, and SDI-12 sensors. Data may be
recorded at intervals between 1 second and 24 hours in 1-second intervals. A 16-character
LED display is provided to assist in the initial setup of the unit. More sophisticated
programming and data retrieval may be accomplished by using a laptop computer. The
operating temperature of the Model 8200A is –40 to 60 degrees Celsius.
The Sutron 8200 is specifically designed for the hydrologic and meteorologic communities.
Each unit has a range of inputs designed to support the most common data-collection
parameters: water level, rainfall, temperature, pressure, relative humidity, and wind speed
and direction. Measurement of these parameters is supported through two shaft encoder
inputs, four analog-to-digital inputs, one SDI-12 "smart" serial interface, and one
accumulator (counter) input. An auxiliary RS-232 communications port is also included.
Each 8200A can store data for periods of several months, depending on the amount of
memory and number of inputs.
For most applications, the user sets up operations by means of a completely sealed touchsensitive
keypad on the front panel. Units can also be set up through the serial port by
means of a portable terminal.
FYI: This stock item is repairable by the HIF.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 M1.9
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Loggers
Data Logger Accessories
Interface Devices
Encoders
MODEL 8200A DATA LOGGER
WITH PHONE/SPEECH
MODEM
5205004
The Model 8200A is a multiparameter data logger manufactured by Sutron Corporation. It
has 124K of on-board memory, which is expandable to 380K. The data logger accepts
inputs from counter, frequency, analog, RS-232, and SDI-12 sensors. Data may be
recorded at intervals between 1 second and 24 hours in 1-second intervals. The telephone
speech modem allows the user to access data using either a modem or standard
telephone. The modem supports both auto-answer and auto-dial capabilities, while the
speech synthesizer allows the user to access the data without a personal computer. The
speech synthesizer allows the user to have complete control over the messages played and
data reported. A 16-character LED display is provided to assist in the initial setup of the
unit. More sophisticated programming and data retrieval may be accomplished by using a
laptop computer. The operating temperature of the Model 8200A is –40 to 60 degrees
Celsius.
The Sutron 8200 is specifically designed for the hydrologic and meteorologic communities.
Each unit has a range of inputs designed to support the most common data-collection
parameters:
- water level
- rainfall
- temperature pressure
- relative humidity
- wind speed and direction
Measurement of these parameters is supported through two shaft encoder inputs, four
analog-to-digital inputs, one SDI-12 "smart" serial interface, and one accumulator
(counter) input. An auxiliary RS-232 communications port is also included.
Each Model 8200A can store data for periods of several months, depending on the amount
of memory and number of inputs.
For most applications, the user sets up operations by means of a completely sealed touchsensitive
keypad on the front panel. Units can also be set up through the serial port by
means of a portable terminal.
FYI: Save time and money by letting HIF’s expert technicians repair this item.
M1.10 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

MODEL 8210 DATA LOGGER
(WITHOUT GOES)
5205010
The Model 8210 is a multi-tasking, multiparameter data logger manufactured by Sutron
Corporation. It has 124K of on-board memory, which is expandable to 380K. The data
logger accepts inputs from counter, frequency, analog, RS-232, and SDI-12 sensors.
Sensor connections are made through a wiring strip located on the right side of the data
logger. Data may be recorded at intervals between 1 second and 24 hours in 1-second
intervals. A 16-character LED display is provided to assist in the initial setup of the unit.
More sophisticated programming and data retrieval may be accomplished by using a laptop
computer. Users may also download data onto a PCMCIA card (Stock No. 5205050). Use
of the PCMCIA card necessitates the use of a card reader (Stock No. 5209055) to transfer
the stored data to a laptop computer. The operating temperature of the Model 8210 is –40
to 60 degrees Celsius.
Enhancements featured in the 8210 include:
• Dual communications now supported in one unit
• PCMCIA memory card slot for data or programming storage
• True industry standard RS-485 port
• 20 Digital input/output lines for SCADA or other control applications
• Internal auxiliary RS-232 port
• Dedicated SDI-12 port with three-wire terminal connection
• Solar-panel battery regulator current increased to 1.5 amps to support larger
solar panels
• Dedicated external RS-232 serial port for programming and data retrieval.
• This unit also supports line-of-sight (LOS) radio communications.
FYI: This item is repairable at the HIF.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 M1.11
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Loggers
Data Logger Accessories
Interface Devices
Encoders
MODEL 8210 DATA LOGGER
WITH PHONE/SPEECH
MODEM
5205020
The Model 8210 is a multi-tasking, multiparameter data logger manufactured by Sutron
Corporation. It has 124K of on-board memory, which is expandable to 380K. The data
logger accepts inputs from counter, frequency, analog, RS-232, and SDI-12 sensors.
Sensor connections are made through a wiring strip located on the right side of the data
logger. Data may be recorded at intervals between 1 second and 24 hours in 1-second
intervals. The telephone/speech modem allows the user to access data using either a
modem or standard telephone. The modem supports both auto-answer and auto-dial
capabilities, while the speech synthesizer allows the user to access the data without a
personal computer. The speech synthesizer allows the user to have complete control over
the messages played and data reported. A 16-character LED display is provided to assist in
the initial setup of the unit. More sophisticated programming and data retrieval may be
accomplished by using a laptop computer. Users may also download data onto a PCMCIA
card (Stock No. 5205050). Use of the PCMCIA card necessitates the use of a card reader
(Stock No. 5209055) to transfer the stored data to a laptop computer. The operating
temperature of the Model 8210 is –40 to 60 degrees Celsius.
Enhancements featured in the 8210 include:
• Dual communications now supported in one unit
• PCMCIA memory card slot for data or programming storage
• True industry standard RS-485 port
• 20 Digital input/output lines for SCADA or other control applications
• Internal auxiliary RS-232 port
• Dedicated SDI-12 port with three wire terminal connection
• Solar panel battery regulator current increased to 1.5 amps to support larger solar
panels
• Dedicated external RS-232 serial port for programming and data retrieval.
This unit also supports line-of-sight (LOS) radio communications.
FYI: A HIF-repairable stock item.
M1.12 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

GS-93A WATER LEVEL
MONITORING SYSTEM
5209001
The GS-93A Water-Level Monitoring System is manufactured by Stevens Water Monitoring
Systems. It is a float-driven, stage measuring and recording system that is designed to
replace the analog-to-digital recorder (ADR). It has an operating temperature of –40 to 60
degrees Celsius. The system consists of a single-channel data logger, a shaft encoder, and
a nonvolatile data storage card, all housed in a NEMA-4 fiberglass enclosure. The
enclosure has the same footprint and shaft input configuration as the ADR. The system
comes with a 12-inch circumference float wheel. This configuration allows the user to
replace an existing ADR without physical modifications to the instrument shelter. An
external 12-volt battery supplies power. The data logger has an 8-digit liquid crystal
display (LCD) and keypad for system set up. This system has no internal memory. All
data are stored on PCMCIA cards that must remain in the system during operation. Each
card is capable of storing approximately 120,000 data values and does not require a
backup battery for data retention. One data card is supplied with each unit. Additional
data cards (Stock No. 5209003) are available. Data retrieval is accomplished by removing
the data card and carrying it back to the office, or by connecting the data logger to a
laptop computer and downloading the data directly from the card to the computer. The
GS-93 Card Reader (Stock No. 5209004) may be used to transfer data from a data card to
a compatible personal computer or Data General work station.
NOTE: THIS GS-93 WATER-LEVEL MONITORING SYSTEM IS NOT DESIGNED TO MEASURE
WATER-LEVEL CHANGES THAT EXCEED 1.25 FEET PER SECOND. WATER LEVEL CHANGES THAT
EXCEED THIS LIMIT MAY CAUSE THE SHAFT ENCODER TO LOSE THE CURRENT READING AND MAY
RESULT IN THE LOSS OF DATA.
FYI: This stock item is repairable by HIF’s expert technicians.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 M1.13
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Loggers
Data Logger Accessories
Interface Devices
Encoders
GS-93B WATER LEVEL
MONITORING SYSTEM
5209002
The GS-93B Water-Level Monitoring System is manufactured by Stevens Water monitoring
Systems. It is a float-driven, stage measuring and recording system that is designed to
work with Stevens Type A and F recorders. It has an operating temperature of –40 to 60
degrees Celsius. The system consists of a single-channel data logger, a shaft encoder, and
a non-volatile data storage card, all housed in a NEMA-4 fiberglass enclosure. The encoder
attaches directly to a Type A or F chart recorder without disrupting the operation of the
recorder. The GS-93B records electronic data without disturbing the operation of the paper
chart recorder. The system comes with a 12-inch circumference float wheel. This
configuration allows the user to replace an existing ADR without physical modifications to
the instrument shelter. An external 12-volt battery supplies power. The data logger has
an 8-digit liquid crystal display (LCD) and keypad for system set up. This system has no
internal memory. All data are stored on PCMCIA cards that must remain in the system
during operation. Each card is capable of storing approximately 120,000 data values and
does not require a backup battery for data retention. One data card is supplied with each
unit. Additional data cards (Stock No. 5209003) are available. Data retrieval is
accomplished by removing the data card and carrying it back to the office, or by
connecting the data logger to a laptop computer and downloading the data directly from
the card to the computer. The GS-93 Card Reader (Stock No. 5209004) may be used to
transfer data from a data card to a compatible personal computer or Data General work
station.
NOTE: THIS GS-93B WATER-LEVEL MONITORING SYSTEM IS NOT DESIGNED TO MEASURE
WATER-LEVEL CHANGES THAT EXCEED 1.25 FEET PER SECOND. WATER LEVEL CHANGES THAT
EXCEED THIS LIMIT MAY CAUSE THE SHAFT ENCODER TO LOSE THE CURRENT READING AND MAY
RESULT IN THE LOSS OF DATA.
FYI: This stock item is repairable by the HIF.
M1.14 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

8400 DATA LOGGER
(12K READING)
5209050
The 8400 Digital Data Recorder is a single channel, float-driven, stage measuring and
recording system designed to replace the Analog-to-Digital Recorder (ADR). The unit
consists of a data logger, shaft encoder, and nonvolatile internal memory capable of
storing 12,000 readings all housed in a NEMA-4 enclosure. The system has the same
footprint and shaft and pulley configuration as the L&S 7000 ADR. It also comes equipped
with a 12-inch circumference float wheel. This configuration, allows the user to replace an
existing ADR without physical modifications to the instrument shelf. The standard USGS
external 12-volt battery supplies power. The battery is not included as part of the system
and must be purchased separately. Programming and set up may be accomplished by
using both the display and keypad on the front of the unit, or a compatible laptop
computer.
Data is retrieved by using either a data card (Stock No. 5209060) or a compatible laptop
computer. If a data card is used for data retrieval, a data card reader (Stock No. 5209055)
is required to transfer the data from the card to your computer system.
NOTE: IF SDI-12 CAPABILITY IS REQUIRED, PLEASE SPECIFY IN THE COMMENTS BLOCK ON
THE ORDER FORM. OLDER UNITS DO NOT HAVE SDI-12 CAPABILITY. SOFTWARE VERSION FOR
NON-SDI-12 UNITS IS 1.2; SOFTWARE VERSION FOR SDI-12 UNITS IS 2.5.
FYI: HIF repairable stock item.
To identify associated
components with this item,
a system diagram appears
in Section T, page T 1.3.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 M1.15
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Loggers
Data Logger Accessories
Interface Devices
Encoders
8400 DATA LOGGER
(50K READING)
5209052
8400 Digital Data Recorder is a single channel, float-driven, stage-measuring and recording
system designed to replace the Analog-to-Digital Recorder (ADR). The unit consists of a
data logger, shaft encoder, and nonvolatile internal memory capable of storing 50,000
readings all housed in a NEMA-4 enclosure. The system has the same footprint and shaft
and pulley configuration as the L&S 7000 ADR. It also comes equipped with a 12-inch
circumference float wheel. This configuration allows the user to replace an existing ADR
without physical modification to the instrument shelf. The standard USGS external 12-volt
dc battery supplies power. The battery is not included as part of the system and must be
purchased separately. Programming and set up may be accomplished by using either the
display or keypad on the front of the unit, or a compatible laptop computer.
Data is retrieved by using either a data card (Stock No. 5209060) or a compatible laptop
computer. If a data card is used for data retrieval, a data card reader (Stock No. 5209055)
is required to transfer the data from the card to your computer system.
FYI: Save time and money on repairs for this item: Return to the HIF.
To identify associated
components with this item,
a system diagram appears
in Section T, page T 1.3.
M1.16 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

H-510 DATA LOGGER
5209025
The H-510 Data Logger is a float-driven, stage measuring and recording system designed
to replace the Analog-to-Digital Recorder (ADR). The unit consists of a data logger, shaft
encoder, and a flash memory card capable of storing 12,000 readings all housed in a
NEMA-4 enclosure. The system has the same footprint and shaft and pulley configuration
as the L&S 7000 ADR. It also comes equipped with a 12-inch circumference float wheel.
The float wheel and pulley configurations, installed on the unit’s back plate, are in the
same relative position as on an ADR, therefore, the system can directly replace an ADR
without modifications to the instrument shelf. The standard USGS external 12-volt dc
battery supplies power. The battery is not included as part of the system and must be
purchased separately. Programming and set up may be accomplished by using both the
display and keypad on the front of the unit, or a compatible laptop computer.
The H-510 has no internal memory. All data are logged on a two-megabyte PCMCIA Flash
memory card. The shaft encoder uses a 9-volt battery (not included) to maintain shaft
encoder data should the logger lose power. A quadrature output is available that is
compatible with the Handar LARC and ALERT hardware.
Data is retrieved by using either a data card or a compatible laptop computer. If a data
card is used for data retrieval, a PCMCIA compatible data card reader is required to
transfer the data from the card to your computer system.
The H-510 is "GOES ready". The firmware is configured to interface with a stand-alone
Telonics GOES transmitter.
FYI: Save time and money on repairs for this item: Return to the HIF.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 M1.17
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Loggers
Data Logger Accessories
Interface Devices
Encoders
How
Instruments
Favor
Another Benefit of HIF Customer Support
NEW EQUIPMENT TESTING
To suggest a commercially available instrument for testing
at the HIF: Contact your ITAS representative, or
fill out form on HIF home page at:
wwwhif.er.usgs.gov/ofa/equip-info/equip-form.html
M1.18 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

M2 Data Logger Accessories
M2.1
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Loggers
Data Logger Accessories
Interface Devices
Encoders
MODEL 320
ENVIRONMENTAL
ENCLOSURE KIT
5202005
Kit is designed for the Model 320 Basic Data Recorder (BDR) environmental enclosure. The
contents of the kit are used to install additional peripherals to the enclosure back plate and
to seal the enclosure from the environment. Contents of the kit include
Item Description Quantity
No. 6 X 32 X 0.375-inch screws 6
Grommets 6
3-cm cable tie tabs 4
4-inch cable ties 6
8-inch cable ties 6
Humidity indicator 1
Sealing putty (4 oz) 1
Desiccant packs 4
CR-10 DATA LOGGER
ENVIRONMENTAL
ENCLOSURE
5206008
The CR-10 environmental enclosure has facilities for installing a CR-10 data logger and an
SM192 storage module. The enclosure provides protection against ambient humidity and
dust. Cable input/output facilities are included.
M2.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

PC-208W SOFTWARE
5203014
The PC-208W software was developed by Campbell Scientific, Inc. (CSI) to support their
data loggers. Windows-based programs provide computer support for data logger program
development and editing, telecommunications, data transfer, real time graphical data
display, storage module communications, data reduction and report generation. PC system
requirements include IBM-compatibility. Windows 3.1, 95, or NT, 3.5-inch disk drive, and
an RS232 port for Hayes modem or communication interfaces.
PCMCIA STATIC RAM CARD,
1 MEG
5205050
PCMCIA Static Ram Card, 1 Meg, -40 degrees Celsius to 70 degrees Celsius. Used with
8210 Data logger and standard 8400 card reader (Stock No. 5209055).
This card is intended for use with the Sutron 8210 data logger/data collection platform.
Data from this card may be downloaded using a standard personal computer (PC) PCMCIA
card reader or a Sutron 8400 card reader.
8400 DATA CARD
The data card is a PCMCIA flash memory card for storing data retrieved from the Sutron
8400 Data Logger (Stock Nos. 5209050 and 5209052). The data card provides nonvolatile
data storage without the need for a backup battery. Data remains on the card until erased
by the user. The data card will operate in temperatures ranging from -40 to +85 degrees
Celsius.
Storage Capacity Stock Number
100,000 Readings (256 KB) 5209060
400,000 Readings (1 MB) 5209065
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 M2.3
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Loggers
Data Logger Accessories
Interface Devices
Encoders
GS-93 DATA CARD
5209003
The GS-93 Data Card is an industry standard PCMCIA flash memory card. It serves both as
the logger's internal data memory and as the medium for retrieving the data record from
the logger and provides nonvolatile data storage without the need for a backup battery.
The data remain on the card until erased by the user. The card has a storage capacity of
approximately 120,000 readings. The operating temperature range for this data card is
–40 to 60 degrees Celsius.
GS-93 CARD READER
5209004
The GS-93 card reader is used to transfer data from GS-93 data cards (Stock No. 5209003)
to a computer and to format or erase the data cards.
FYI: Save time and money by letting HIF’s expert technicians repair this stock item.
GS-93 SOFTWARE
DISKETTE AND
MANUAL
5209009
M2.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

8400 CARD READER
5209055
The Sutron 8400 card reader is used to transfer data stored on the data card (Stock No.
5209060) to a compatible computer and to format or erase a data card. The reader
requires a 15-volt ac power source and is primarily used in an office setting.
Components included with the card reader are the power adapter for plugging the unit into
an ac power source, a 6-foot interface cable to connect the card reader to a computer, a
3.5-inch floppy disk containing device drivers and utility software, and an operating
manual.
FYI: This stock item is repairable by HIF’s expert technicians.
KEYPAD AND DISPLAY UNIT
5206001
The keypad and display unit, manufactured by Campbell Scientific, Inc. (CSI), is a handheld
device used to program the CR-10 (Stock No. 5203003) and CR-10X (Stock No.
5203010) data loggers. It has no data retrieval capabilities.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 M2.5
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Loggers
Data Logger Accessories
Interface Devices
Encoders
SM192 STORAGE
MODULE
5206003
The SM192 storage module can be used to expand the data storage capacity of a CR-10
data logger, retrieve data from CR-10 and CSI 320 data loggers or install programs in a
CR-10 data logger. It operates in temperatures ranging from -35 to 55 degrees Celsius.
The module uses the CR-10 power source when connected; it uses internal batteries when
disconnected. It has 192 KB of storage, which can be partitioned among several programs
or data records. Communications cable must be ordered separately.
FYI: Save time and money by letting HIF’s expert technicians repair this stock item.
BDR 320 POWER CABLE
WITH CONNECTOR FOR
BATTERY CABLE
5202004
The 5-foot power cable provides a connection between the Model 320 BDR and a battery
cable.
9-PIN COMMUNICATIONS
CABLE
5206002
This 9-pin communications cable is used to connect the CR-10 (Stock No. 5203003) and
the CR-10X (Stock No. 5203010) data loggers to the SM192 storage module (Stock No.
5206003), the keypad and display unit (Stock No. 5206001), and other 9-pin peripherals.
M2.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Y CABLE FOR MODEL 301
DATA LOGGER
5208001
The Y-cable is used to connect the components of a data-collection system, which utilizes
the Campbell Scientific Model 301 data logger, a single SDI-12 sensor, and a rechargeable
12-volt battery.
JUNCTION BOX WITH
CABLES (FOR MODEL 301
DATA LOGGER)
5208002
The junction box is a hermetically sealed plastic box with a terminal block for connecting
the components of a data-collection system: a Model 301 data logger, one or more
sensors, and a power source. It comes with cables for the Model 301 data logger, one SDI-
12 sensor with USGS connector, and a 12-volt battery with USGS connector. To connect
additional sensors, additional cables must be ordered. FYI: A HIF-repairable stock item.
To identify associated
components with this item,
a system diagram appears in
Section T, page T 1.5.
JUNCTION BOX TO
BATTERY CABLE
5208003
Cable is designed to connect a 12-volt battery with USGS connector to a junction box for
the Model 80 or Model 301 data loggers. It comes with a watertight strain relief for easy
installation in the junction box.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 M2.7
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Loggers
Data Logger Accessories
Interface Devices
Encoders
SDI-12 JUNCTION BOX
CABLE
5208004
Cable is designed to connect the Model 301 data logger SDI-12 power connector to a
junction box. It comes with a watertight strain relief for easy installation in the junction
box.
ANALOG CONNECTOR TO
JUNCTION BOX CABLE
5208005
Cable is designed to connect the Model 301 data logger analog connector to the junction
box. It comes with a watertight strain relief for easy installation in the junction box.
JUNCTION BOX
5208006
The junction box is a hermetically sealed plastic box with a terminal block for connecting
the components of a data-collection system. Cables are not included.
FYI: Save time and money by letting HIF’s expert technicians repair this stock item.
M2.8 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

SDI-12 SENSOR CABLE
5208007
Cable is designed to connect a SDI-12 sensor to the junction box. It is 5 feet long and
comes with a watertight strain relief for easy installation in the junction box.
COMMUNICATIONS CABLE
5208009
Cable is designed to connect the Model BDR 301 data logger to a computer serial port.
SOLDERLESS 9-PIN 'D'
CONNECTOR (MALE)
5208011
Allows the user to adapt a cable for use with a male 9-pin “D” connector. Connector
includes a cable clamp and two terminal blocks for making the required wiring connections.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 M2.9
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Loggers
Data Logger Accessories
Interface Devices
Encoders
Y CABLE (FOR MODEL 80
DATA LOGGER)
5208020
This Y-cable is used to connect the components of a data-collection system which utilizes
the Environmental Systems Model 80 data logger, a single SDI-12 sensor, and a
rechargeable 12-volt battery.
JUNCTION BOX WITH
CABLES (FOR MODEL 80
DATA LOGGER)
5208021
This junction box is a hermetically sealed plastic box with a terminal block for connecting
the components of a data-collection system: a Model 80 data logger, one or more sensors,
and a power source. It comes with cables for the Model 80 data logger, one SDI-12 sensor
with USGS connector, and a 12-volt battery with USGS connector. To connect additional
sensors, additional cables must be ordered. FYI: This stock item is repairable by the HIF.
MODEL 80 DATA LOGGER
CABLE
5208023
Cable connects the Model 80 data logger to a junction box. It comes with a watertight
strain relief for easy installation in the junction box.
M2.10 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

9- TO 25-PIN
COMMUNICATION CABLE
5208027
3-TO 9-PIN
COMMUNICATION CABLE
5208028
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 M2.11
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Loggers
Data Logger Accessories
Interface Devices
Encoders
H-510 COMMUNICATION
CABLE
5209030
Communication cable for H-510 data logger. Five-foot cable with 9-pin “D” connector on
one end, and a 9-pin circular connector on the other end. Interfaces the H-510 to
computer.
M2.12 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

M3 Interface Devices
M3.1
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Logger Accessories Data Loggers
Interface Devices
Encoders
CR-10 TEMPERATURE
INTERFACE
5203015
CR-10 temperature interface with temperature probe. Allows the use of the minimonitor
temperature probe with the CR-10.
FYI: Save time and money on repairs for this item: Return to the HIF.
CR-10 CONDUCTIVITY
SENSOR INTERFACE
5203020
CR-10 Conductivity Sensor Interface. Interfaces with conductivity electrode assembly
(Stock No. 5203025).
Allows user to connect a conductivity probe to CR-10 data logger. Not recommended for
use in excess of 400 feet or in water with conductivity less than 300 microsiemens.
Extension cables of 25, 50, 100 and 200 feet are available as needed.
FYI: Save time and money by letting HIF’s expert technicians repair this stock item.
M3.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

CR-10 CONDUCTIVITY
ELECTRODE ASSEMBLY,
POTTED
5203025
CR-10 Conductivity Electrode Assembly, potted. For use with the CR-10 conductivity
sensor interface (Stock No. 5203020).
Allows user to connect a conductivity probe to CR-10 data logger. Not recommended for
use in excess of 400 feet or in water with conductivity less than 300 microsiemens.
Extension cables of 25, 50, 100 and 200 feet are available as needed.
FYI: This item is repairable by HIF’s expert technicians.
SC532 INTERFACE
5206004
The SC532 is a powered interface between the SM192 and other Campbell Scientific
modules, which do not have an internal power source and a computer. Communications
cables (Stock Nos. 5206002 and 5206010) must be ordered separately.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 M3.3
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Logger Accessories Data Loggers
Interface Devices
Encoders
QD1 INTERFACE
5206005
The QDI allows the CR-10 data logger to interpret the output of an incremental encoder. It
has an operating temperature of -25 to 55 degrees Celsius.
SC32A INTERFACE
5206006
The SC32A interface facilitates communication between a CR-10 or 21X data logger and a
computer through the computer's serial port. 9-pin peripheral to 25-pin peripheral.
Communication cable must be ordered separately.
M3.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

SDI INCREMENTAL
INTERFACE (LID)
5206015
The SDI Incremental Interface (SDI3), also referred to as the LARC Interface Device (LID),
is a device that converts SDI-12 data to an output that emulates an incremental shaft
encoder. The device connects between an SDI-12 sensing/recording system and a non-
SDI-12 recording system (receiving device). The SDI3 obtains its input data from the SDI-
12 serial interface and provides these data to the receiving device. The output from the
SDI3 provided to the non-SDI-12 recording system mimics that of an incremental shaft
encoder.
The SDI3 comprises a plastic enclosure with two cables that are prewired to internal
terminal strips. The 3-conductor cable connects to the SDI-12 serial interface (bus). The 7conductor
cable furnishes the SDI3 incremental output signals to the receiving device. Each
cable is approximately 5 feet long and has stripped and tinned wire terminations. No
connectors are furnished on the cables. The 3-conductor (SDI-12) cable wires are typically
connected inside a junction box or on a terminal strip at the SDI-12 data-collection device.
The 7-conductor cable wires are usually connected to a terminal strip or an appropriate
connector on the receiving device. It may be necessary for the user to furnish an
appropriate connector for the data-collection device being used
The SDI3 receives its power from the SDI-12 bus. A small switch (ON/OFF), mounted next
to the cables, turns power on and off to the interface.
The device measures 6-7/8 inches by 6-7/8 inches by 3 inches and weighs approximately 2
pounds.
FYI: Save time and money on repairs for this item: Return to the HIF.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 M3.5
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Logger Accessories Data Loggers
Interface Devices
Encoders
Handy!
Instant!
Friendly!
Another Benefit of HIF Customer Support
HOW EASY CAN IT BE?
Ordering is simplified with increased selection on
USGS One-Stop Shopping on the Internet at
1stop.usgs.gov
M3.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

M4 Encoders
M4.1
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Logger Accessories Data Loggers
Interface Devices
Encoders
436A ENCODER
(WITH INCREMENTAL
OUTPUT)
5207001
The Handar 436A is a float-driven stage sensor with an incremental output that is designed
for use with Handar data-acquisition products that have incremental encoder inputs. When
the 5/16-inch diameter smooth shaft is fitted with a 1-foot pulley, it measures stage with a
resolution of 0.01 foot. FYI—This item is repairable by HIF’s expert technicians.
NOTE: SOME OLDER 436A MODELS HAVE THREADED SHAFTS.
To identify associated components
with this item, a system diagram
appears in Section T, page T 1.12.
436B ENCODER
(WITH SDI-12 OUTPUT)
5207002
The Handar 436B is a float-driven stage sensor with an SDI-12 output that is designed for
use with any data-acquisition product that has an industry-standard SDI-12 data interface.
When the 5/16-inch diameter smooth shaft is fitted with a 1-foot pulley, it measures stage
over a range from 0 to 327.67 feet with a resolution of 0.01 foot. FYI—This item is
repairable at the HIF.
To identify associated components
with this item, a system diagram
appears in Section T, page T 1.12.
M4.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

436A/B ENCODER
(WITH INCREMENTAL
AND SDI-12 OUTPUTS)
5207003
The Handar 436A/B is a float-driven stage sensor with two independent outputs? one
incremental and one SDI-12. It is designed for simultaneous use with any Handar dataacquisition
product with an incremental encoder input, with CR-10 and 21X data loggers
when used with a Campbell QD1 incremental encoder interface, and any data-acquisition
product with an industry-standard SDI-12 data interface. When the 5/16-inch diameter
smooth shaft is fitted with a 1-foot pulley, it measures stage with a resolution of 0.01 foot.
FYI—Save time and money by letting HIF’s expert technicians repair this item.
To identify associated components
with this item, a system diagram
appears in Section T, page T 1.12.
MAXIMUM AND MINIMUM
STAGE INDICATOR
5207004
The max-min stage indicator is a wire spring that is attached to each side of the float tape
under the instrument shelf. As the float rises and falls, the indicators hit against the
underside of the instrument shelf and slide along the float tape. By knowing the distance
between the bottom of the instrument shelf and the float tape indicator on top of the
instrument shelf, it is possible to obtain an accurate reading of the maximum and minimum
stage readings since the last visit to the site.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 M4.3
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Logger Accessories Data Loggers
Interface Devices
Encoders
436BD ENCODER
(WITH SDI-12 OUTPUT)
5207006
The Handar 436BD is a float-driven stage sensor with an SDI-12 output designed for use
with compatible SDI-12 loggers and DCP's. The 436BD has an integral five-digit LED
display. When fitted with a 1-foot pulley, it measures stage from 0 to 327.67 feet with a
resolution of 0.01 foot. The display feature will allow users to view the current water level
and/or make changes to the water level being measured. FYI—Save time and money on
repairs for this item: Return to the HIF.
To identify associated components
with this item, a system diagram
appears in Section T, page T 1.12.
STAGE POTENTIOMETER
5207010
This stage sensor consists of a precision, wire-wound 10-turn potentiometer on an
aluminum bracket. It is used with various data-recording devices such as data loggers and
data-collection platforms. The potentiometer provides an output voltage that increases with
rising stage and decreases with falling stage. It requires a precision, switched excitation
voltage and is connected to an analog input on the data-recording device. When used with
a one-foot circumference float wheel, the range of measurement is 10 feet.
The stage potentiometer, commonly called a “stage pot,” was designed as a stage sensor
for non-critical applications, with moderate accuracy, where low cost is an important factor.
These pots are precision units with a resistance tolerance of +/- 3 percent and a linearity
of +/- 0.1 percent. With the proper data logger or data collection platform (DCP) setup,
and proper wiring and measurement techniques, errors of +/- 0.05 ft are common. THE
STAGE POT DOES NOT MEET THE ACCURACY REQUIREMENTS OF STAGE
SENSING FOR PRIMARY RECORDS.
Stage pots are intended for applications where continuous float motion or "painting" does
not occur. Continuous movement of the water surface, particularly at the same gage
height, can cause wear of the internal contacts of the pot, resulting in intermittent contacts
and unreliable data.
M4.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

UNIVERSAL SHAFT
ENCODER CABLE
5207015
Cable may be used to connect a Synergetics 501A shaft encoder to a Synergetics data
collection platform (DCP), a Handar 436A shaft encoder to a Handar DCP, or a Sutron
5600-530 shaft encoder to a Sutron DCP. Each cable is supplied with a card listing the
wiring connections required for each encoder.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 M4.5
Data Loggers Data Logger Accessories Interface Devices Encoders

Data Logger Accessories Data Loggers
Interface Devices
Encoders
Helping
Improve the
Functions
Another Benefit of HIF Customer Support
CUSTOMER OPINION COUNTS
A Customer Response Card is included with each order shipped
from the HIF. When card is returned to the HIF, all
responses/comments are included in a quarterly report.
HIF tries to make sure customers stay satisfied.
M4.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

N Power Supplies, Battery Cables,
& Regulators
• N1 Power Supplies, Battery Cables, and Regulators
Section N
Power Supplies, Battery Cables, and Regulators

Power Supplies, Battery Cables, and Regulators
SECTION CONTENTS
Regulator Charger ...........................................................................................................N1.2
Section N
Wall Charger...................................................................................................................N1.2
Battery Connector Cable (12-inch) ...................................................................................N1.2
Pigtail (6-inch) ................................................................................................................N1.3
Pigtail (24-inch) ..............................................................................................................N1.3
Parallel Battery Harness...................................................................................................N1.3
Two-Conductor Connector (Orange) .................................................................................N1.3
Two-Conductor Connector (Red) ......................................................................................N1.4
Insertion Tool .................................................................................................................N1.4
USGS Regulator Charger..................................................................................................N1.4

N1 Power Supplies, Battery Cables,
& Regulators
N1.1
Power Supplies, Battery Cables, and Regulators

Power Supplies, Battery Cables, and Regulators
REGULATOR CHARGER
5305007
The Model 78-1 is a temperature-compensated regulator charger used to trickle charge 12volt
batteries. A 15- to 20-volt dc input provided by either a 100-volt ac wall charger
(Stock No. 5305008, not included) or a solar panel (not included) is required to power it.
The regulator charger is supplied with two 24-inch battery cables.
FYI: A HIF-repairable stock item.
WALL CHARGER
5305008
Provides power for regulator charger (Stock No. 5305007). Plugs into standard 110-volt
alternating current wall outlet and outputs 19 volts direct current (no load) with a
maximum current capability of 275 milliamperes.
BATTERY CONNECTOR
CABLE (12-INCH)
5305009
Battery connector cable, 12-inch, connects battery to equipment.
N1.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Pigtail, 6-inch, connects equipment to battery cable.
Pigtail, 24-inch, connects equipment to battery cable.
PIGTAIL (6-INCH)
5305010
PIGTAIL (24-INCH)
5305011
PARALLEL BATTERY
HARNESS
5305012
Parallel battery harness connects two pieces of equipment to battery or one piece of
equipment to two batteries.
TWO-CONDUCTOR
CONNECTOR (ORANGE)
5305018
Two-conductor connector (orange). Used to make battery cables of 18-gage wire.
Sold 10 to a pack.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 N1.3
Power Supplies, Battery Cables, and Regulators

Power Supplies, Battery Cables, and Regulators
TWO-CONDUCTOR
CONNECTOR (RED)
5305022
Two-conductor connector (red). Used to make battery cables of 22-gage wire. Sold 10 to a
pack.
INSERTION TOOL
5305023
Insertion tool. For proper installation of wire into two-conductor connector.
USGS REGULATOR
CHARGER
5305040
Newly designed USGS regulator charger supports large (26 and 60 Amp-Hour) and small (8
Amp-Hour) batteries. Automatically switches between fast charging and trickle charging as
needed. Temperature-compensated, current-limited output properly charges batteries
while allowing no "back current" from battery. Powered from 110-volts ac (cord provided)
or from a solar panel (recommended 20 Watts nominal).
FYI: Save time and money on repairs for this item: Return to the HIF.
N1.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

O Float Float Wheels, Wheels, Float Float Tapes, Tapes, Tapes, and and
and
Counterweights
Counterweights
Counterweights
•= O1 Float Wheels, Floats, and Counterweights
•= O2 Float Tapes and Indicators
Section O
Float Wheels, Floats and Counterweights

Cableway Anchor Bar
and Accessories Float Wheels, Floats, and Counterweights
Section O
SECTION CONTENTS
Insulated, Tape-Driven Float Wheel.............................................................................O1.2
Uninsulated, Tape-Driven Float Wheel .........................................................................O1.2
Cable-Driven Float Wheel............................................................................................O1.2
Stage Kit....................................................................................................................O1.3
2-1/2 inch Polyethylene Float ......................................................................................O1.3
Stage/Rainfall Kit........................................................................................................O1.3
Rainfall Float Wheel....................................................................................................O1.4
Stainless Steel Counterweight .....................................................................................O1.4
End Hook...................................................................................................................O1.4
1-1/2-Inch Polyethylene Float .....................................................................................O1.5
Plastic Float ...............................................................................................................O1.5
Float Hanger ..............................................................................................................O1.5
Stranded Stainless Steel Wire......................................................................................O1.6
Encoder Adapter Sleeve..............................................................................................O1.6
Float Wheel Mounting Kit............................................................................................O1.6
Plastic Hub.................................................................................................................O1.7
PVC Float...................................................................................................................O1.7
Stainless Steel Tape ...................................................................................................O2.2
Float Tape Indicator ...................................................................................................O2.2
Adjustable Idler Wheel ...............................................................................................O2.3
Idler Wheel................................................................................................................O2.3
Idler Wheel Kit ..........................................................................................................O2.3

O1 Float Float Float Wheels, Wheels, Floats, Floats, and
and
Counterweights
Counterweights
O1.1
Float Wheels, Floats, and Counterweights Float Tapes and Indicators

Float Wheels, Floats, and Counterweights
Cableway Anchor Bar
Float Tapes and Indicators
and Accessories
INSULATED, TAPE-DRIVEN
FLOAT WHEEL
5306002
Metal float wheel with plastic insert to insulate instrument shaft from electrical spikes.
Designed for instruments with a 5/16-inch diameter smooth shaft. The float wheel ratio is
1:1 (one revolution of the float wheel equals one foot of measured depth).
UNINSULATED, TAPE-
DRIVEN FLOAT WHEEL
5306003
Metal float wheel with 1/2-inch diameter center hole. Float Wheel Mounting Kit (Stock No.
5306022) available for mounting float wheel to instruments with a 5/16-inch shaft which
do not require electrical insulation. The float wheel ratio is 1:1 (one revolution of the float
wheel equals one foot of measured depth).
CABLE-DRIVEN FLOAT
WHEEL
Metal float wheel for use in a 3-inch pipe or other area where space is restricted. Use of
this float wheel requires the use of stranded steel cable (Stock No. 5306020) to suspend
the float and counterweight. The ratio of the float wheel is 1:1 (one revolution of the float
wheel equals one foot of measured depth).
Center Hole Diameter (inches) Stock Number
1/4 5306004
5/16 5306005
O1.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

STAGE KIT
5306006
The stage kit is designed to measure stage in a 3-inch pipe or other areas where space is
restricted. The kit consists of a 2-1/2-inch diameter polyethylene float, a 6-ounce stainless
steel counterweight, 40 feet of stranded steel cable, and a counterweight standoff with
idler wheel. Float wheel must be ordered separately.
Float, molded polyethylene, 2-1/2-inch diameter.
2-1/2 INCH POLYETHYLENE
FLOAT
5306007
STAGE/RAINFALL KIT
5306008
Stage/rainfall kit, with 1-1/2-inch polyethylene float contains 40 feet of stranded steel
cable, a 4-ounce counterweight, and a counterweight standoff and idler wheel.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 O1.3
Float Wheels, Floats, and Counterweights
Float Tapes and Indicators

Float Wheels, Floats, and Counterweights
Cableway Anchor Bar
Float Tapes and Indicators
and Accessories
Rainfall float wheel, 3-13/16-inch diameter.
RAINFALL FLOAT WHEEL
5306009
STAINLESS STEEL
COUNTERWEIGHT
Weight (ounces) Stock Number
1-1/2 5306046
4 5306017
6 5306018
10 5309011
16 5306019
42 5309045
END HOOK
5306012
End hooks are used with a punched, steel float tape to provide a suspension point for the
float and counterweight. Sold as a set of 2.
O1.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

1-1/2-INCH POLYETHYLENE
FLOAT
5306013
A 1-1/2-inch float is for use in cases where smaller pipe wells are used.
PLASTIC FLOAT
Plastic float weighted with concrete for proper balance. A float hanger (Stock No. 5306015)
is required for proper installation. Float is available in two sizes. They are as follows:
Size (inches) Stock Number
10 5306016
12 5306014
FLOAT HANGER
5306015
The float hanger is used to suspend the float from the end hook at the end of a float tape.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 O1.5
Float Wheels, Floats, and Counterweights
Float Tapes and Indicators

Float Wheels, Floats, and Counterweights
Cableway Anchor Bar
Float Tapes and Indicators
and Accessories
STRANDED STAINLESS
STEEL WIRE
5306020
Cable wire is used to suspend float and counterweight when using a cable driven float
wheel. Supplied in 1000-foot rolls only.
ENCODER ADAPTER
SLEEVE
5306021
Adapts a 1/4-inch diameter shaft to a 5/16-inch diameter shaft.
FLOAT WHEEL MOUNTING
KIT
5306022
For use with uninsulated, tape-driven, metal float wheels having a 1/2-inch center hole.
O1.6 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

PLASTIC HUB
5306030
Converts float wheels having a 1/2-inch center hole to 5/16-inch and insulates shafts from
electrical surges.
PVC FLOAT
Description Stock Number
4-inch diameter, for use with 16-ounce stainless 5306035
steel counterweight (Stock No. 5306019)
6-inch diameter, for use with 42-ounce stainless 5306037
steel counterweight (Stock No. 5306045)
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 O1.7
Float Wheels, Floats, and Counterweights
Float Tapes and Indicators

Float Wheels, Floats, and Counterweights
Cableway Anchor Bar
Float Tapes and Indicators
and Accessories
Hydrologic ydrologic
Instrumentation
nstrumentation
Facility acility
Another Benefit of the HIF Repair Program
AUTHORIZED REPAIR FACILITY
The HIF is an authorized repair facility for Handar,
Hydrolab, Sutron, and Synergetics
O1.8 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

O2 Float Float Tapes Tapes and and Indicators
Indicators
O2.1
Float Wheels, Floats, and Counterweights
Float Tapes and Indicators

Float Wheels, Floats, and Counterweights
Cableway Anchor Bar
and Accessories Float Tapes and Indicators
STAINLESS STEEL TAPE
Tapes have holes punched along the entire length for use with both the insulated and
uninsulated tape-driven float wheels (Stock Nos. 5306002 and 5306003). Graduation is
etched on the surface of the tape. Each tape contains 4-feet of ungraduated leader on
each end. Stainless steel tape is available in four different lengths and is graduated in two
different intervals. They are listed below:
Description Stock Number
25-feet long, graduated at 0.2-foot intervals 5307001
25-feet long, graduated at 0.5-foot intervals 5307010
50-feet long, graduated at 0.2-foot intervals 5307002
50-feet long, graduated at 0.5-foot intervals 5307011
100-feet long, graduated at 0.2-foot intervals 5307003
500-feet long, not graduated 5307004
FLOAT TAPE INDICATOR
5307015
Indicates position where stage (gage height) is read on float tape.
O2.2 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

ADJUSTABLE IDLER WHEEL
5307016
Idler wheel is designed for use with the insulated and uninsulated tape-driven float wheels
(stock number 5306002 and 5306003) to offset the counterweight so that it does not hit
the float as they rise and fall in the stilling well.
IDLER WHEEL
5307017
Idler wheel for use with the insulated and uninsulated tape drive float wheels. Idler wheel
only.
IDLER WHEEL KIT
5306025
Idler wheel kit is designed for use with a cable driven float wheel to offset the
counterweight so that it does not hit the float as they rise and fall in the stilling well.
wwwhif.er.usgs.gov/uo/ FAX (228) 688-1610 (800) 382-0634 O2.3
Float Wheels, Floats, and Counterweights Float Tapes and Indicators

Float Wheels, Floats, and Counterweights
Cableway Anchor Bar
and Accessories Float Tapes and Indicators
Helping elping elping
In
Fundamentals
undamentals
A Benefit of the HIF Engineering Program
Did you know?
Instrumentation application assistance is available
O2.4 (800) 382-0634 FAX (228) 688-1610 wwwhif.er.usgs.gov/uo/

P Water-Quality Monitors
• P1 Water-Quality Monitor and Accessories,
Hydrolab
• P2 Water-Quality Monitor and Accessories, YSI
• P3 Flow-Through Chamber
Section P
Water Quality Monitors

Minimonitors and
Hydrolab Water Quality Monitors
Accessories
YSI
Hydrolab H20 Water-Quality
Monitor .............................................P1.2
Hydrolab Low-Ionic Strength
Reference, pH....................................P1.2
Hydrolab Stirrer with Sensor
Guard ...............................................P1.3
Hydrolab Datasonde 3 Water-
Quality Monitor ..................................P1.3
DS3 Battery Power Pack ........................P1.4
Hydrolab Underwater Cables..................P1.4
Datasonde 3 Stirrer Adapter ..................P1.5
Hydrolab Computer Interface
Cable................................................P1.5
Hydrolab Auxiliary Power Cord...............P1.5
SDI-12 Interface Cable..........................P1.6
Flow Cell .............................................P1.6
Hydrolab Calibration Cable.....................P1.7
Calibration Cup.....................................P1.7
Storage Cup.........................................P1.8
Standard Dissolved-Oxygen
Membrane.........................................P1.8
Low-Flow Dissolved-Oxygen
Membrane.........................................P1.9
Datasonde 3 Video................................P1.9
Weighted Sensor Guard ........................P1.10
Datasonde 3 Submersible Battery
Pack with Stirrer ................................P1.10
Aluminum Calibration Stand...................P1.11
Plastic Calibration Stand........................P1.11
Adapter for Plastic Calibration
Stand................................................P1.11
Turbidity Probe.....................................P1.12
Hydrolab Maintenance Kit ......................P1.12
Maintenance Kit for Low-Flow
Dissolved-Oxygen...............................P1.12
Teflon Junction.....................................P1.13
Hydrolab Reporter ................................P1.13
25-Meter Cable without Stirrer
Connector .........................................P1.13
Surveyor 4 with 128K Memory ...............P1.14
Surveyor 4 Adapter Cable......................P1.14
Hydrolab Underwater Cables for
Minisonde 4 and Datasonde 4..............P1.15
Datasonde 4 Water-Quality
Monitor .............................................P1.16
External Power Adapter Cable................P1.16
SDI-12, RS-232 Adapter Cable...............P1.17
Section P
SECTION CONTENTS
Minisonde 4 .........................................P1.17
Minisonde Weighted Sensor
Guard...............................................P1.18
Mooring Fixture for Minisonde................P1.18
Maintenance Kit for Minisonde ...............P1.18
Minisonde 4 with Vented Level...............P1.19
Nitrate Body Adapter.............................P1.19
pH/ORP Probe......................................P1.19
Turbidity Probe ....................................P1.20
Flow Cell for Minisonde and DS4............P1.20
Teflon Junction, Series 4.......................P1.20
Model 85 Handheld Water-Quality
Monitor.............................................P2.2
Model 600 Water-Quality Monitor...........P2.2
600XL Water-Quality Monitor.................P2.3
pH/ORP Probe......................................P2.3
YSI Flow-Thru Chamber (Models
600, 600XL, & 600XLM)......................P2.4
Model 600XLM Water-Quality
Monitor.............................................P2.4
Model 6920 Water-Quality
Monitor.............................................P2.5
Model 6000 Water-Quality
Monitor.............................................P2.5
Calibration Cable..................................P2.6
YSI Flow-Thru Chamber (Model
6000) ...............................................P2.6
Field Cable ..........................................P2.7
Turbidity Probe ....................................P2.7
pH/ORP Probe......................................P2.8
Model 610 Display ................................P2.8
Dissolved-Oxygen Membranes ...............P2.9
Field Cable to Computer........................P2.9
Field Cable to Flying Lead Wire
Adapter ............................................P2.9
Communications Cable..........................P2.10
External Power Connector .....................P2.10
Maintenance Kit....................................P2.10
Maintenance Brush ...............................P2.11
Dissolved-Oxygen Probe Service
Kit ....................................................P2.11
Flow Cell For YSI 6920..........................P2.11
Flow-Through Chamber ........................P3.2
Connector, Liquid-Tight (Grip
0.400-0.560) .....................................P3.2
Connector, Liquid-Tight (Grip
0.870-1.020) .....................................P3.3

P1 Hydrolab Water-Quality
Monitors and Accessories
P1.1
Hydrolab YSI Flow-Through Chamber

Flow-Through Chamber YSI
Hydrolab
HYDROLAB H20 WATER-
QUALITY MONITOR
6103000
The H20 manufactured by Hydrolab is a water-quality monitor that measures pH,
dissolved oxygen, conductance, and temperature as standard parameters. It has SDI-12
and RS-232 outputs. A low ionic strength reference pH (Stock No. 6103003) and/or a
turbidity probe (Stock No. 6103040) may be added to the standard probes for specific
applications. The Surveyor 4 (Stock No. 6103070) may be used to set up, calibrate, and
review data collected by the H20. An underwater cable (Stock Nos. 6103009, 6103010,
6103053, and 6103054), sensor guard (Stock No. 6103027), sensor guard with stirrer
(Stock No. 6103005), and interface cables, which are application dependent, must be
ordered with the H20.
FYI: Save time and money on repairs for this item: Return to the HIF.
HYDROLAB LOW-IONIC
STRENGTH REFERENCE pH
6103003
Low ionic-strength reference pH (LPH) for Hydrolab H20, Datasonde 3.
P1.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

HYDROLAB STIRRER WITH
SENSOR GUARD
6103005
This stirrer is designed for the H20 and the Datasonde 3. It is recommended for use
when deployed where there is little or no water flow.
FYI: A HIF-repairable stock item.
HYDROLAB DATASONDE 3
WATER-QUALITY MONITOR
6103006
Datasonde 3 (DS3) manufactured by Hydrolab is a water-quality monitor which
measures pH, dissolved oxygen, specific conductance, and temperature as standard
parameters. A low ionic strength reference pH probe (Stock No. 6103070) and a
turbidity probe (Stock No. 6103040) may be added to the standard probes for specific
applications. The DS3 has unattended data logging capability. The Surveyor 4 (Stock No.
6103070) may be used to set up, calibrate, and view current data collected by the DS3.
An underwater cable (Stock Nos. 6103009, 6103010, 6103053, and 6103054) or
calibration cable (Stock No. 6103013), sensor guard (Stock No. 6103027) or sensor
guard with stirrer (6103005) and interface cables, which are application dependent,
must be ordered with this unit.
FYI: This stock item is repairable by the HIF.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 P1.3
Hydrolab YSI
Flow-Through Chamber

Flow-Through Chamber YSI
Hydrolab
DS3 BATTERY POWER PACK
6103008
Battery pack holds 12 alkaline “C” cell batteries (not included) for Datasonde 3 without
internal batteries.
HYDROLAB UNDERWATER
CABLES
Underwater cable with stirrer connection is used to connect the H20, Datasonde 3,
Datasonde 4 water-quality monitor to an SDI-12 or RS-232 data logger or other
compatible device when used in conjunction with the appropriate interface cable.
Length (meters) Stock Number
5 6103009
10 6103010
25 6103011
50 6103053
100 6103054
P1.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

DATASONDE 3 STIRRER
ADAPTER
6103012
Connects the Submersible Battery Pack (Stock No. 6103008) and the Submersible
Battery Pack with Stirrer (Stock No. 6103028) with the Datasonde 3 to provide
additional power to extend the time between battery changes.
FYI: This stock item is repairable by HIF’s expert technicians.
HYDROLAB COMPUTER
INTERFACE CABLE
6103013
Connects the H20, Datasonde 3, and Reporter with a computer through an underwater
cable. When this cable is used with the H20 or Reporter, the auxiliary power cable
(Stock No. 6103014) is required.
HYDROLAB AUXILIARY
POWER CORD
6103014
Used in conjunction with the Computer Interface Cable (Stock No. 6103013) to provide
auxiliary power for the H20, Datasonde 3, and Reporter. Cable comes with a 4-pin
connector that plugs into the computer interface cable and battery leads with spade
lugs.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 P1.5
Hydrolab YSI
Flow-Through Chamber

Flow-Through Chamber YSI
Hydrolab
SDI-12 INTERFACE CABLE
6103015
Connects water-quality monitor using an underwater cable to an SDI-12 compatible data
logger.
FLOW CELL
6103016
The flow cell screws into the end of the H20 and Datasonde 3 replacing the storage cup.
It allows water to be studied without submerging the monitor. This accessory is used in
areas, such as small groundwater wells, where it is not practical to place the monitor
directly in the water to be sampled.
WARNING:
1. DO NOT EXCEED A PUMPING RATE OF 1.5 LITERS PER MINUTE.
2. FILTER DEBRIS FROM FEED LINE IF NECESSARY.
3. DO NOT LET THE PRESSURE IN THE FLOW CELL OR ITS FEED LINE EXCEED 15 PSIG. HIGHER
PRESSURE MAY BURST THE FLOW CELL, POSSIBLY CAUSING SERIOUS INJURY.
P1.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

HYDROLAB CALIBRATION
CABLE
6103017
Connects the H20, Datasonde 3, Reporter, and Datasonde 4 to a computer. This cable is
for use in those applications where an underwater cable is not in use.
CALIBRATION CUP
6103022
Calibration cup for the H20, Datasonde 3, and early models of the Datasonde 4.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 P1.7
Hydrolab YSI
Flow-Through Chamber

Flow-Through Chamber YSI
Hydrolab
STORAGE CUP
6103023
Storage cup for the H20, Datasonde 3, and early models of the Datasonde 4.
STANDARD DISSOLVED-
OXYGEN MEMBRANE
6103024
The Standard Dissolved-Oxygen (DO) Membrane is made of 1-mil Teflon. It is used
when fouling is not a problem and a flow rate of one foot per second or greater is
assured. The standard DO membrane is for use on the H20, Datasonde 3, and
Datasonde 4 water-quality monitors. Membranes are packaged 10 to a pack.
P1.8 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

LOW-FLOW DISSOLVED-
OXYGEN MEMBRANE
6103025
The Low-Flow Dissolved-Oxygen (DO) Membrane is made of a low-permeability
polymer. It is used in applications where probe foulings are very likely and very low flow
(1 mil per second or greater) is normal. The low-flow DO membrane is for use on the
H20 and Datasonde 3 water-quality monitors. Membranes are packaged 10 to a pack.
DATASONDE 3 VIDEO
6103026
VHS videotape describes the deployment, operation, and maintenance of the
Datasonde 3.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 P1.9
Hydrolab YSI
Flow-Through Chamber

Flow-Through Chamber YSI
Hydrolab
WEIGHTED SENSOR GUARD
6103027
The weighted sensor guard is used to hold the monitor vertical in the flow and protect
the probes of the H20, Datasonde 3, Reporter, and early models of the Datasonde 4
which have internal threads on the monitor to mount the guard.
DATASONDE 3
SUBMERSIBLE BATTERY
PACK WITH STIRRER
6103028
The submersible battery pack is a combination of both stirrer and power supply. It is
used with a DataSonde 3 when both an increase in current flow and a larger power
supply are needed. It is powered by 12 "C" batteries (not included) providing about 7amp
hours. The stirrer includes a guard. This device feeds power through the bulkhead
connector of the DataSonde3.
FYI: Save time and money by letting HIF’s expert technicians repair this stock item.
P1.10 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

ALUMINUM CALIBRATION
STAND
6103032
Aluminum calibration stand for the Hydrolab and YSI-6000 water-quality monitors.
PLASTIC CALIBRATION
STAND
6103035
Plastic calibration stand for use with Hydrolab and YSI-6000 water-quality monitors
ADAPTER FOR PLASTIC
CALIBRATION STAND
6103036
Adapter for plastic calibration stand (Stock No. 6103035) supports the Hydrolab
minisonde and YSI 600/600XL/600XLM.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 P1.11
Hydrolab YSI
Flow-Through Chamber

Flow-Through Chamber YSI
Hydrolab
TURBIDITY PROBE
6103040
Turbidity probe for Hydrolab H20 and Datasonde 3 water-quality monitors.
HYDROLAB MAINTENANCE
KIT
6103042
Maintenance kit for H20 and Datasonde 3 water-quality monitors. Each kit contains a
bottle of DO electrolyte, 10 standard DO membranes, two DO O-rings, a bottle of
reference electrolyte, two strips of sandpaper, a small container of silicone gel,
conductivity cell-block screw, and seven conductivity O-rings.
MAINTENANCE KIT FOR
LOW-FLOW DISSOLVED-
OXYGEN
6103043
Maintenance kit for the H20 and Datasonde 3 water-quality monitors. Each kit contains
two 3-volt lithium batteries, two battery clips, one DO O-ring, and 10 low-flow
membranes and O-ring.
P1.12 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

TEFLON JUNCTION
6103057
Teflon junction for standard pH reference electrode used with H20 and Datasonde 3.
HYDROLAB REPORTER
6103060
The Reporter is a two parameter water-quality monitor. The two parameters supported
are temperature and specific conductance. The Reporter allows either attended or
unattended data collection with RS-232 and SDI-12 outputs.
FYI: Save time and money on repairs for this item: Return to the HIF.
25-METER CABLE WITHOUT
STIRRER CONNECTOR
6103065
This cable is for use with the H20, Datasonde 3, Reporter, and Datasonde 4.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 P1.13
Hydrolab YSI
Flow-Through Chamber

Flow-Through Chamber YSI
Hydrolab
SURVEYOR 4 WITH 128K
MEMORY
6103070
The Hydrolab Surveyor 4 display may be used with the H20, Datasonde 3, Reporter,
Datasonde 4, and Minisonde. It allows the user to view all parameters including internal
battery voltage and barometric pressure simultaneously on a high-density liquid-crystal
display. The Surveyor 4 contains 128k memory.
FYI: This stock item is repairable by the HIF.
SURVEYOR 4 ADAPTER
CABLE
6103075
Interfaces a Surveyor 4 to underwater cables (Stock Nos. 6103009, 6103010, 6103011,
6103053, and 6103054). This cable is not needed if underwater cables for the
Datasonde 4 and Minisonde 4 (Stock Nos. 6103076, 6103077, and 6103078) are
ordered.
P1.14 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

HYDROLAB UNDERWATER
CABLES FOR MINISONDE 4
AND DATASONDE 4
Cables are used to connect the Minisonde 4 and Datasonde 4 water-quality monitors to
an SDI-12 or RS-232 data logger or other compatible device when used with the
appropriate interface cable. This cable cannot be secured to the H20, Datasonde 3, or
Reporter water-quality monitors.
Length (meters) Stock Number
10 6103076
50 6103077
75 6103078
150 6103079
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 P1.15
Hydrolab YSI
Flow-Through Chamber

Flow-Through Chamber YSI
Hydrolab
DATASONDE 4 WATER-
QUALITY MONITOR
6103080
Datasonde 4 manufactured by Hydrolab is a water-quality monitor that measures pH,
dissolved oxygen, temperature, and specific conductance as standard parameters. It
contains internal memory, an internal battery pack, SDI-12 and RS-232 outputs, and a
weighted sensor guard. A low ionic strength reference pH probe (Stock No. 6103003), a
turbidity probe (Stock No. 6103104), and a pH/ORP probe (Stock No. 6103100) may be
added to the standard probes for specific applications. The Surveyor 4 (Stock No.
6103070) may be used to set up, calibrate, and review data collected by the Datasonde
4. An underwater cable (Stock No. 6103076, 6103077, and 6103078), calibration cable
(Stock No. 6103017), and interface cables, which are application dependent, must be
ordered with this unit.
FYI: Save time and money on repairs for this item: Return to the HIF.
EXTERNAL POWER
ADAPTER CABLE
6103082
Interfaces Datasonde 4 and Minisonde 4 field cable to PC and allows the user to connect
to an external battery.
P1.16 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

SDI-12, RS-232 ADAPTER
CABLE
6103083
Allows the user to connect to a Hydrolab Series 4 underwater cable and have the option
of accessing either an SDI-12 or RS-232 device. A lead for external battery power is
provided.
MINISONDE 4
6103090
The Minisonde 4 manufactured by Hydrolab is a water-quality monitor that measures
pH, dissolved oxygen, specific conductance, and temperature as standard parameters. It
contains internal memory, an internal battery pack, and SDI-12 and RS-232 outputs. A
pH/ORP probe (Stock No. 6103100) may be substituted for the standard pH probe. The
Surveyor 4 (Stock No. 6103070) may be used to set up, calibrate, and review data
collected by the Minisonde 4. An underwater cable (Stock Nos. 6103076, 6103077,
6103078), calibration cable (Stock No. 6103017), and interface cables, which are
application dependent, must be ordered with this unit.
FYI: This stock item is repairable by HIF’s expert technicians.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 P1.17
Hydrolab YSI
Flow-Through Chamber

Flow-Through Chamber YSI
Hydrolab
Minisonde weighted sensor guard.
MINISONDE WEIGHTED
SENSOR GUARD
6103092
MOORING FIXTURE FOR
MINISONDE
6103093
Mooring fixture for Minisonde. Cap which screws into the top of the Minisonde 4 to allow
the user to secure the monitor with a support cable.
MAINTENANCE KIT FOR
MINISONDE
6103094
Maintenance kit for the Minisonde and Data Sonde 4. Includes dissolved-oxygen
electrolyte, 15 standard membranes, spare dissolved-oxygen O-ring, toothbrush,
syringe, reference electrolyte, sandpaper, silicone gel, spare conductivity screws, spare
conductivity O-rings, and a spanner wrench.
P1.18 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

MINISONDE 4 WITH
VENTED LEVEL
6103095
Hydrolab Minisonde 4 (pH, dissolved oxygen, temperature, and conductivity) with
vented level and 100 feet of fixed cable.
FYI: Save time and money by letting HIF’s expert technicians repair this stock item.
NITRATE BODY ADAPTER
6103099
Nitrate body adapter used for mounting a Hydrolab nitrate tip. The nitrate tip is not
supplied by HIF and may be purchased directly from Hydrolab (PN 3404).
Note: Remove your tip before returning the rental unit to HIF.
pH/ORP PROBE
6103100
pH/Oxidation reduction probe (pH/ORP or REDOX) for Datasonde 4 and Minisonde 4.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 P1.19
Hydrolab YSI
Flow-Through Chamber

Flow-Through Chamber YSI
Hydrolab
Turbidity Probe for Datasonde 4 and Minisonde 4.
TURBIDITY PROBE
6103104
FLOW CELL FOR
MINISONDE AND DS4
6103106
Flow cell for Hydrolab Minisonde and DS4 water-quality monitors in still water.
TEFLON JUNCTION,
SERIES 4
6103107
Teflon Junction for standard pH reference electrode for use with Series 4 Hydrolab
water-quality monitor. This is a replacement part or spare if needed.
NOTE: A new Teflon junction is installed on all units before being shipped to the field.
P1.20 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

P2 YSI Water-Quality Monitor
and Accessories
P2.1
Hydrolab YSI Flow-Through Chamber

Hydrolab
YSI
Flow-Through Chamber
MODEL 85 HANDHELD
WATER-QUALITY MONITOR
6104001
The Model 85 is a handheld water-quality monitor with a waterproof case manufactured
by Yellow Springs Instruments (YSI). It is capable of measuring dissolved oxygen,
conductivity, salinity, and temperature. The probes are permanently attached to the
instrument case by 100 feet of cable. Probe storage is provided in the calibration
chamber built into the instrument case. Six AA alkaline batteries (not included) power
the Model 85. New batteries will provide approximately 100 hours of continuous
operation. A power saving feature will automatically shut off the instrument after 30
minutes without a keystroke.
MODEL 600 WATER-
QUALITY MONITOR
6104005
The Model 600 is a water-quality monitor manufactured by Yellow Springs Instruments
(YSI) which measures conductivity and temperature. It has both SDI-12 and RS232
outputs. A calibration cable (Stock No. 6104016) and field cable (Stock Nos. 6104018,
6104020, 6104030, 6104031, 6104032, and 6104034) must be ordered for each unit
deployed. The Model 610 display (Stock No. 6104040) may be used to set up, calibrate,
and view current data collected by the Model 600.
FYI: This stock item is repairable by the HIF.
P2.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

600XL WATER-QUALITY
MONITOR
6104010
The Model 600XL is a water-quality monitor manufactured by Yellow Springs
Instruments (YSI). The 600XL measures conductivity, temperature, pH, and dissolved
oxygen. It has both SDI-12 and RS232 outputs. A pH/ORP probe (Stock No. 6104011)
may be substituted for the standard pH probe. A calibration cable (Stock No. 6104016)
and field cable (Stock Nos. 6104018, 6104020, 6104031, 6104032, and 6104034) must
be ordered for each unit deployed. The Model 610 display (Stock No. 6104040) may be
used to set up, calibrate, and view current data collected by the Model 600XL.
FYI: A HIF-repairable stock item.
pH/ORP PROBE
6104011
PH/Oxidation Reduction Probe (pH/ORP or REDUX) for the Model 600XL and 600XLM.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 P2.3
Hydrolab YSI Flow-Through Chamber

Hydrolab
YSI
Flow-Through Chamber
YSI FLOW-THRU CHAMBER
(MODELS 600, 600XL, &
600XLM)
6104012
The Flow-Thru Chamber fits over the probe end of the Model 600, 600XL, and 600XLM
water-quality monitors. It allows the water to be studied without submerging the
monitor. This accessory is used in areas, such as small ground-water wells, where it is
not practical to place the monitor directly in the water to be sampled.
WARNING:
1. DO NOT EXCEED A FLOW RATE OF 1.5 GALLONS PER MINUTE.
2. FILTER DEBRIS FROM THE FEED LINE IF NECESSARY.
3. DO NOT BLOCK THE OUTLET PORT OR CRIMP THE OUTLET HOSE.
4. PRESSURE WITHIN THE SAMPLE CHAMBER MUST NOT EXCEED 10 PSI.
MODEL 600XLM WATER-
QUALITY MONITOR
6104013
The Model 600XLM is a water-quality monitor manufactured by Yellow Springs
Instruments (YSI). The 600XLM measures conductivity, temperature, pH, and dissolved
oxygen. It has internal flash memory capable of storing 150,000 readings, both SDI-12
and RS232 outputs and is powered by 4 AA batteries (not included). A pH/ORP probe
(Stock No. 6104011) may be substituted for the standard pH probe. A calibration cable
(Stock No. 6104016) or field cable (Stock Nos. 6104020, 6104030, 6104031, 6104032,
and 6104034) must be ordered. The Model 610 display (Stock No. 6104040) may be
used to set up, calibrate, and view current data collected by the Model 600XLM.
FYI: Save time and money on repairs for this item: Return to the HIF.
P2.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

MODEL 6920 WATER-
QUALITY MONITOR
6104014
The YSI 6920 is an SDI-12 multiparameter water-quality monitoring and data logging
system that measures pH, DO (rapid-pulse sensor-no stirrer needed), temperature, and
conductivity. It will log all parameters at programmable intervals and store 150,000
readings. At 15-minute intervals, it will log data for about 30 days. Power is supplied by
8 AA alkaline batteries (not included) or external 12 Volt dc batteries. Data must be
downloaded by a YSI 610 display/logger or to a computer. The unit measures 2.85
inches in diameter by 18 inches long and weighs approximately 4 pounds.
FYI: This stock item is repairable by HIF’s expert technicians.
MODEL 6000 WATER-
QUALITY MONITOR
6104015
The Model 6000 is a water-quality monitor with internal data logging capability
manufactured by Yellow Springs Instruments (YSI). The 6000 measures conductivity,
temperature, pH, and dissolved oxygen. It has 256 kilobytes of internal memory, both
SDI-12 and RS232 outputs, and is powered by 8 C-cell batteries (not included). An
optional pH/ORP probe (Stock No. 6104011) and turbidity probe (Stock No. 6104038)
may be added for special applications. A calibration cable (Stock No. 6104016) or field
cable (Stock Nos. 6104018, 6104020, 6104030, 6104031, 6104032, and 6104034) must
be ordered. The Model 610 display (Stock No. 6104040) may be used to set up,
calibrate, and view current data collected by the Model 6000.
FYI: A HIF-repairable stock item.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 P2.5
Hydrolab YSI Flow-Through Chamber

Hydrolab
YSI
Flow-Through Chamber
CALIBRATION CABLE
6104016
The calibration cable is a 10-foot cable that allows the user to connect the water-quality
monitor to either a laptop computer or the Model 610 display to set up the monitor and
calibrate the probes. This cable is not waterproof and is not intended for use in the
water. When used with the Model 600 and 600XL, an external power source is required.
YSI FLOW-THRU CHAMBER
(MODEL 6000)
6104017
The Flow-Thru Chamber fits over the probe end of the Model 6000 water-quality
monitor. It allows the water to be studied without submerging the monitor. This
accessory is used in areas, such as small ground-water wells, where it is not practical to
place the monitor directly in the water to be sampled.
WARNING:
1. DO NOT EXCEED A FLOW RATE OF 1.5 GALLONS PER MINUTE.
2. FILTER DEBRIS FROM THE FEED LINE IF NECESSARY.
3. DO NOT BLOCK THE OUTLET PORT OR CRIMP THE OUTLET HOSE.
4. PRESSURE WITH THE SAMPLE CHAMBER MUST NOT EXCEED 10 PSI.
P2.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

FIELD CABLE
The Field cable is used to connect the Model 600, 600XL, 600XLM, and 6000 waterquality
monitor to an SDI-12 or RS232 data logger or other compatible device. This
cable is also used to suspend the monitor.
Length (feet) Stock Number
25 6104018
50 6104020
100 6104030
200 6104031
300 6104032
500 6104034
TURBIDITY PROBE
6104037
Turbidity probe for use with Models 6000 and 6920 only.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 P2.7
Hydrolab YSI Flow-Through Chamber

Hydrolab
YSI
Flow-Through Chamber
pH/ORP PROBE
6104038
pH/Oxidation Reduction Probe (pH/ORP or REDOX) for the Model 6000.
MODEL 610 DISPLAY
6104040
The Model 610 display may be used with the Model 600, 600XL, 600XLM, 6000, and
6920. It is housed in a waterproof case and uses a liquid crystal display that allows the
user to view all parameters and menus. The 610 contains 32 K battery backed up RAM
internal memory.
FYI: Save time and money by letting HIF’s expert technicians repair this stock item.
P2.8 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

DISSOLVED-OXYGEN
MEMBRANES
6104042
Dissolved-oxygen (DO) membranes for the Model 85 water-quality monitor. Membranes
are packaged six to the pack.
FIELD CABLE TO COMPUTER
6104050
YSI field cable to computer with power connector for all models.
FIELD CABLE TO FLYING
LEAD WIRE ADAPTER
6104060
YSI field cable to flying lead wire adapter (SDI-12 cable) for all models.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 P2.9
Hydrolab YSI Flow-Through Chamber

Hydrolab
YSI
Flow-Through Chamber
COMMUNICATIONS CABLE
6104061
The communications cable connects the Model 600, 600XL, 600XLM, 6000, and 6920
water-quality monitor to an SDI-12 or RS232 device through the field cable. Leads to
connect to external power are also provided.
YSI external power connector for all models.
EXTERNAL POWER
CONNECTOR
6104070
MAINTENANCE KIT
6104095
Maintenance kit for Model 600XL, 600XLM, 6000, and 6920 water-quality monitors.
P2.10 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

MAINTENANCE BRUSH
6104096
Maintenance brush for cleaning conductivity probe of Model 600 water-quality monitor.
DISSOLVED-OXYGEN
PROBE SERVICE KIT
6104097
Kit includes 20 membranes, 2 spare DO-“O” rings, and KCI crystals to which the user
must add distilled water to make KCI solution. This may also be used with Hydrolab DO
probes.
Flow-through cell for YSI 6920 water-quality monitor.
FLOW CELL FOR YSI 6920
6104100
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 P2.11
Hydrolab YSI Flow-Through Chamber

Hydrolab
YSI
Flow-Through Chamber
Helpful!
Informative!
Friendly!
Another Benefit of the HIF Warehouse
Did you know?
When an order is shipped, an E-mail confirmation
is sent to the customer
P2.12 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

P3 Flow-Through Chamber
P3.1
Hydrolab
YSI Flow-Through Chamber

Hydrolab
YSI
Flow-Through Chamber
FLOW-THROUGH
CHAMBER
6301001
The flow-through chamber is mounted on three legs. Water is pumped into the chamber
at an angle from the bottom, which creates a circular motion within the chamber. Water
is drained from the chamber through a pipe mounted in the bottom. Conductivity,
temperature, pH, and dissolved-oxygen probes from a minimonitor are mounted in the
top of the chamber through liquid-tight connectors. The chamber is designed for
ground-water applications using small-diameter pumps.
Volume: 2.66 liters
Height: 18 inches
Length (stand to stand): 17 inches
Chamber diameter: 9 inches
Connector, liquid-tight (grip 0.400-0.560).
CONNECTOR, LIQUID-
TIGHT (GRIP 0.400-0.560)
6301003
P3.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Connector, liquid-tight (grip 0.870-1.020).
CONNECTOR, LIQUID-
TIGHT (GRIP 0.870-
1.020)
6301004
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 P3.3
Hydrolab YSI Flow-Through Chamber

Hydrolab
YSI
Flow-Through Chamber
Helpful,
Informative
Fact
Another Benefit of the HIF Testing Program
Did you know?
An ISO certified calibration laboratory is available
P3.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Q Data Collection Platforms
• Q1 DCP and Accessories
• Q2 Antennas and Solar Panels
• Q3 Grounding Equipment
Section Q
Data Collection Platforms

Data Collection Platforms
SECTION CONTENTS
Handar 570A Data-Collection Platform ..............................................................................Q1.2
Handar 570 Incremental Encoder Interface Board.............................................................Q1.2
Handar 570 Analog-to-Digital Interface Board...................................................................Q1.3
Handar 570 ADR Interface Board .....................................................................................Q1.3
Handar 570 Smart Sensor Interface Board........................................................................Q1.4
Handar 570 Telephone Modem ........................................................................................Q1.4
Handar 570 Power, Encoder, and Tipping Bucket Raingage Cable ......................................Q1.5
Handar 550/560/570 Communication Cable ......................................................................Q1.5
Handar 570 to SDI-12 Sensor Cable .................................................................................Q1.5
Handar 128K Memory Card..............................................................................................Q1.6
Handar 555A Data-Collection Platform ..............................................................................Q1.6
Handar 555A Communication Cable..................................................................................Q1.7
Software for 555A ...........................................................................................................Q1.7
555A Data-Collection Platform with Speech Modem...........................................................Q1.8
Interface Board, Handar 555A..........................................................................................Q1.9
Synergetics Data-Collection Platform with SCADA 1 Programming ....................................Q1.10
Synergetics Data-Collection Platform with SCADA 2 Programming ....................................Q1.11
Synergetics Incremental Shaft Encoder ..........................................................................Q1.11
Synergetics Telephone Modem Module ...........................................................................Q1.12
Synergetics Environmental Enclosure .............................................................................Q1.12
Model 8200 Sutron Data-Collection Platform ...................................................................Q1.13
Model 8200A Sutron Data-Collection Platform .................................................................Q1.13
Sutron SDI-12 Cable with 4-Pin Connector......................................................................Q1.14
Sutron SDI-12 Cable with Stripped End ..........................................................................Q1.14
Sutron 8210 Data-Collection Platform .............................................................................Q1.15
Sutron 8210 Data-Collection Platform with Phone/Speech Modem ....................................Q1.16
Radio Frequency (RF) Connector......................................................................................Q2.2
Helical GOES Antenna (Top Hat) ......................................................................................Q2.2
X-Yagi Antenna with Mounting Kit ....................................................................................Q2.2
Antenna Cable ................................................................................................................Q2.3
X-Yagi Antenna Element Replacement Pack ......................................................................Q2.3
Solar Panel .....................................................................................................................Q2.3
Grounding Kit for Electronic Equipment ............................................................................Q3.2
Videos “How to Cadweld One Shot”..................................................................................Q3.2
Contax ...........................................................................................................................Q3.3
Ground Enhancement Material (GEM) ...............................................................................Q3.3
Cadweld One Shot for Three No. 6 AWG...........................................................................Q3.4
Grounding Conductor No. 6 AWG.....................................................................................Q3.4
Grounding Rod................................................................................................................Q3.4
Cadweld One Shot for One No. 6 AWG.............................................................................Q3.5
Ground Bus Bar...............................................................................................................Q3.5
Hook-Up Wire for No. 12 AWG.........................................................................................Q3.5
Striker for Cadweld One Shot ...........................................................................................Q3.6
Flint for Cadweld One Shot ..............................................................................................Q3.6
Ground Rod Driving Sleeve ..............................................................................................Q3.6
Section Q

Q1 DCP & Accessories
Q1.1
DCP & Accessories Antennas and Solar Panels
Grounding Equipment

DCP & Accessories
Antennas and Solar Panels
Grounding Equipment
HANDAR 570A DATA-
COLLECTION PLATFORM
8102030
Handar 570A Data-Collection Platform, with power cable. Operates one Handar Model 436A
and one tipping bucket rain gage.
The Handar Model 570A data-collection platform (DCP) is capable of sampling one
incremental encoder, one tipping-bucket rain gage and its internal battery voltage on a time
or event basis, storing the information and later transmitting by satellite. Data-collection
capability may be greatly expanded by adding any combination of up to six interface boards.
Backup batteries not included.
FYI: Save time and money by letting HIF’s expert technicians repair this stock item.
HANDAR 570 INCREMENTAL
ENCODER INTERFACE
BOARD
8102031
The Handar incremental encoder interface board increases the data-collection capability of
the Handar Model 570A data-collection platform (DCP) by a second incremental shaft
encoder, a second tipping-bucket rain gage and eight single-ended 0- to 5-volt direct-current
inputs with 8-bit resolution. Switched outputs of 5 volts and 12 volts are available to control
external devices.
FYI: This stock item is repairable by HIF’s expert technicians.
Q1.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

HANDAR 570 ANALOG-TO-
DIGITAL INTERFACE BOARD
8102032
The Handar 12-bit analog-to-digital converter interface board expands the data-collection
capabilities of the Handar Model 570A data-collection platform (DCP). The new capabilities
include: 16 single-ended or 8 differential analog inputs, or some combination thereof, in
ranges of 0 to 5 volts, 0 to .5 volts, 0 to 50 millivolts and 0 to 5 millivolts with two
independently controlled switched 12-volt direct-current outputs at 180 milliamperes and one
5-volt direct-current outputs at 40 milliamperes.
FYI: This stock item is repairable by the HIF.
HANDAR 570 ADR
INTERFACE BOARD
8102033
The Handar ADR interface board allows the Handar Model 570A data-collection platform
(DCP) to record values from up to four 16-bit analog-to-digital recorders (ADR's) and four
single-ended 0 to 5-volt direct-current analog inputs with 8-bit resolution. Constant 7.5-volt
and switched 7.5-volt outputs are available for ADR operation.
FYI: A HIF-repairable stock item.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 Q1.3
DCP & Accessories Antennas and Solar Panels Grounding Equipment

DCP & Accessories
Antennas and Solar Panels
Grounding Equipment
HANDAR 570 SMART
SENSOR INTERFACE BOARD
8102034
The Handar smart sensor interface (SDI-12) board provides for SDI-12 sensor control and
data reception with an SDI-12 bus. The card is capable of managing up to 31 sensors or
data fields. A maximum of two smart sensor interface boards may be installed in a single
570A DCP.
FYI: This stock item is repairable by HIF’s expert technicians.
HANDAR 570 TELEPHONE
MODEM
8102036
The Handar voice modem is optionally installed in the 570A Handar Model data-collection
platform (DCP) and may be used in conjunction with, or independently from, the
Geostationary Operational Environmental Satellite (GOES) radio. The unit provides for call in
and (or) call out data reporting by voice and (or) RS-232 data either on a timed or on an
event-controlled basis.
FYI: This stock item is repairable by the HIF.
Q1.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

HANDAR 570 POWER,
ENCODER, AND TIPPING
BUCKET RAINGAGE CABLE
8102039
This cable is used to provide power to the DCP and also provides data inputs from a tipping
bucket raingage, and a Handar 436A Shaft Encoder.
FYI: A HIF-repairable stock item.
HANDAR 550/560/570
COMMUNICATION CABLE
8102040
Provides a means of communication between the DCP and a computer.
FYI: Save time and money on repairs for this item: Return to the HIF.
HANDAR 570 TO SDI-12
SENSOR CABLE
8102041
Provides input to the DCP from a Handar 436B or 436A/B Shaft Encoder.
FYI: Save time and money by letting HIF’s expert technicians repair this stock item.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 Q1.5
DCP & Accessories Antennas and Solar Panels Grounding Equipment

DCP & Accessories
Antennas and Solar Panels
Grounding Equipment
HANDAR 128K MEMORY
CARD
8102042
128K-memory card for Handar 570A Data Collection Platform.
HANDAR 555A DATA-
COLLECTION PLATFORM
8102050
The Handar Model 555A is a multi-channel, programmable data-collection platform. The
555A accepts input from a variety of devices including analog, digital, pulse-counter, switchclosure,
SDI-12, and frequency-type sensors. Output capabilities include eight digital outputs
for controlling sensors, and two 12-volt outputs and a 5-volt output for powering sensors.
The unit comes with 128 kilobytes of onboard memory for storing data. A user-furnished 12volt
battery or an optional solar panel provides power.
The 555A offers a flexible programming technique that enables the user to perform
numerous measurement and data processing functions. Examples of these functions include
conditional data logging, event driven processes, data averaging, storing
minimums/maximums, and other math processes. The sample rate may be programmed
from 1 second to 45 days. A computer and Handar software (Stock No. 8102052) are
required for programming the unit and/or data retrieval.
The unit is housed in a fiberglass enclosure that measures 9.0 inches by 10.5 inches by 6.5
inches and weighs approximately 7 pounds. All input/output connections are made through
terminal strips on the front of the 555A. The specified operating temperature range of the
unit is -40 to 55 degrees Celsius.
FYI: Save time and money by letting HIF’s expert technicians repair this stock item.
Q1.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

HANDAR 555A
COMMUNICATION
CABLE
8102051
Provides communications between the DCP and a computer.
FYI: This stock item is repairable by HIF’s expert technicians.
SOFTWARE FOR 555A
8102052
Contains utilities for uploading data from the DCP to a computer and downloading programs
from a computer to the DCP.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 Q1.7
DCP & Accessories Antennas and Solar Panels Grounding Equipment

DCP & Accessories
Antennas and Solar Panels
Grounding Equipment
555A DATA-COLLECTION
PLATFORM WITH SPEECH
MODEM
8102058
The Handar Model 555A is a multi-channel, programmable data-collection platform. The
555A accepts input from a variety of devices including analog, digital, pulse-counter, switchclosure,
SDI-12, and frequency-type sensors. Output capabilities include eight digital outputs
for controlling sensors, and two 12-volt outputs and a 5-volt output for powering sensors.
The unit comes with 128 kilobytes of onboard memory for storing data. A user-furnished 12volt
battery or an optional solar panel provides power.
The 555A offers a flexible programming technique that enables the user to perform
numerous measurement and data processing functions. Examples of these functions include
conditional data logging, event driven processes, data averaging, storing minimums/maximums,
and other math processes. The sample rate may be programmed from 1
second to 45 days. A computer and Handar software (Stock No. 8102052) are required for
programming the unit and data retrieval.
The unit is housed in a fiberglass enclosure, which measures 9.0 inches by 10.5 inches by 6.5
inches and weighs approximately 7 pounds. All input-output connections are made through
terminal strips on the front of the 555A. The operating temperature range of the unit is -40
to 55 degrees Celsius.
The speech modem may be used with, or independently from, the GOES radio. The unit
provides for call-in and call-out data reporting by voice and (or) RS-232 data either on a
timed or an event controlled basis.
FYI: Save time and money on repairs for this item: Return to the HIF.
Q1.8 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

INTERFACE BOARD,
HANDAR 555A
8102059
Multi-Communications Interface Board for the Handar 555A Data Collection Platform.
FYI: Save time and money on repairs for this item: Return to the HIF.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 Q1.9
DCP & Accessories Antennas and Solar Panels Grounding Equipment

DCP & Accessories
Antennas and Solar Panels
Grounding Equipment
SYNERGETICS DATA-
COLLECTION PLATFORM
WITH SCADA 1
PROGRAMMING
8103003
The basic DCP consists of three stacked modules, the Master Control Module (MCM), the
Transmit Module (XMTR) and the End Device Interface Module (EDIM).
The MCM provides control and timing to and from the other modules and stores data, all
under microprocessor control. The DCP setup is programmed into the MCM by the user
connecting an IBM-compatible laptop computer to the RS-232 port located on the front of the
MCM. Upon request, the HIF Electronics Unit can fabricate a communications cable for
connecting your particular computer to the MCM. The Programming Language used is called
SCADA (Supervisor Control and Data Acquisition - pronounced scah-dah). This DCP uses
SCADA 1 language with "T" equations and Interval Timing.
The XMTR provides 10 watts nominal of Radio Frequency (RF) output to transfer data to the
satellite and also supplies the timing frequency for the MCM's microprocessor.
The EDIM is used to interface sensors with the DCP. It provides eight analog input channels
with 12-bit analog-to-digital (A/D) conversion for each channel, one tipping bucket input
(pulse input counter), one 16-bit binary or binary-coded-decimal (BCD) input channel, one
quadrature shaft encoder input, four programmable outputs, a switched 12-volt output, and
a 7.5 volt constant output for sensor use.
FYI: Save time and money on repairs for this item: Return to the HIF.
Q1.10 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

SYNERGETICS DATA-
COLLECTION PLATFORM
WITH SCADA 2
PROGRAMMING
8103020
The basic DCP consists of three stacked modules, the Master Control Module (MCM), the
Transmit Module (XMTR) and the End Device Interface Module (EDIM).
The MCM provides control and timing to and from the other modules and stores data, all
under microprocessor control. The DCP setup is programmed into the MCM by the user,
through the RS-232 port located on the front of the MCM using an IBM-compatible laptop
computer. Upon request, the HIF Electronics Unit can fabricate a communications cable for
connecting your particular computer to the MCM. The programming language used is called
SCADA (Supervisor Control and Data Acquisition - pronounced scah-dah). This DCP uses
SCADA 2 language with programmable Actions and Events.
The XMTR provides 10 watts nominal of Radio Frequency (RF) output to transfer data to the
satellite and also supplies the timing frequency for the MCM's microprocessor.
The EDIM is used to interface sensors with the DCP. It provides eight analog input channels
with 12-bit analog-to-digital (A/D) conversion for each channel, one tipping-bucket input
(pulse input counter), one 16-bit binary or binary-coded-decimal (BCD) input channel, one
quadrature shaft encoder input, four programmable outputs, a switched 12-volt output, and
a 7.5 volt constant output for sensor use.
FYI: A HIF-repairable stock item.
SYNERGETICS
INCREMENTAL SHAFT
ENCODER
8103011
The Synergetics 501A incremental shaft encoder (encoder) provides a quadrature output with
100 increments per 360-degree revolution and connects directly to the front of the
Synergetics data-collection platform (DCP), end device interface module (EDIM) or 510 Talk-
A-Mark. An attaching cable is provided with the encoder. FYI: This stock item is repairable
by the HIF.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 Q1.11
DCP & Accessories Antennas and Solar Panels Grounding Equipment

DCP & Accessories
Antennas and Solar Panels
Grounding Equipment
SYNERGETICS TELEPHONE
MODEM MODULE
8103018
The Synergetics 3422A direct connect telephone modem module may be added to the
Synergetics data-collection platform (DCP) stack. This module allows computer access by
telephone lines to the modem for programming or data transfer. When ordering this item,
an S34 bus ribbon cable with adequate connectors to connect the modem to the DCP stack is
required for proper operation. If you do not have this cable you may request one in the
special instructions section of your order.
FYI: Save time and money on repairs for this item: Return to the HIF.
SYNERGETICS
ENVIRONMENTAL
ENCLOSURE
8103025
Metal enclosure. 19 inches high by 14 inches wide by 10 inches deep. Provides protection
from the environment.
Q1.12 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

MODEL 8200 SUTRON DATA-
COLLECTION PLATFORM
8105001
The Sutron 8200 is specifically designed for the hydrologic and meteorologic communities.
Data input is supported through two shaft encoder inputs, four analog-to-digital inputs, one
SDI-12 "smart" serial interface, and one accumulator (counter) input. An auxiliary RS-232
communications port is also included. The 8200 has 124K (62,000 readings) of internal
memory and operates from –30 to 60 degrees Celsius. Power is provided through an
external 12-volt power source. For most applications, the user may set up operations by
means of a completely sealed touch-sensitive keypad on the front panel. Units may also be
set up through the serial port by a computer.
FYI: This stock item is repairable by the HIF.
MODEL 8200A SUTRON
DATA-COLLECTION
PLATFORM
8105010
The Sutron 8200A is specifically designed for the hydrologic and meteorologic communities.
Data input is supported through two shaft encoder inputs, eight analog-to-digital inputs, one
SDI-12 "smart" serial interface, and one accumulator (counter) input. An auxiliary RS-232
communications port is also included. The 8200A has 124K (or 62,000 readings) of internal
memory and operates from –30 to 60 degrees Celsius. Power is provided through an
external 12-volt power source. For most applications, the user may set up operations by
means of a completely sealed touch-sensitive keypad on the front panel. Units may also be
set up through the serial port by a computer.
FYI: This stock item is repairable by HIF’s expert technicians.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 Q1.13
DCP & Accessories Antennas and Solar Panels Grounding Equipment

DCP & Accessories
Antennas and Solar Panels
Grounding Equipment
SUTRON SDI-12 CABLE
WITH 4-PIN CONNECTOR
8105015
Allows communication between the Sutron 8200 and a Handar 436B and 436A/B. A 5-foot
cable with a 9-pin "D" connector on one end and a 4-pin circular connector on the other end.
Allows SDI-12 data input to Sutron 8200 and 8200A DCP's or data loggers. Cable most
commonly used to provide communication between Handar 436B and 436A/B encoders and
the Sutron 8200 and 8200A DCP and data loggers.
SUTRON SDI-12 CABLE
WITH STRIPPED END
8105018
SDI-12 cable, 5-foot with 9-pin male "D" connector on one end and stripped and tinned wires
on the other end. Used to connect Sutron 8200 and 8200A to Accubar pressure sensor (-5
model) or other SDI-12 sensors with terminal strip connectors.
Q1.14 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

SUTRON 8210 DATA-
COLLECTION PLATFORM
8105030
The 8210 is packaged in a NEMA 4 fiberglass enclosure with a front panel display and keypad
for easy data viewing and setup. Data input is supported through two shaft encoder inputs,
two SDI-12 inputs, a dedicated solar panel input, eight analog-to-digital inputs, five switch
closure inputs, switched power output, and an external RS-232 port. Sensor connections are
made through the wiring strip located on the right side of the unit. The 8210 has batterybacked
on-board memory for storing 62,000 readings. If desired, stored data can be
retrieved, or programs downloaded, through the RS-232 port or by using a PCMCIA data
card. Data card not included (see Stock No. 5205050). Power is provided from an external
12-volt supply. The operating temperature range is -40 to 60 degrees Celsius.
FYI: A HIF-repairable stock item.
To identify associated
components with this item,
a system diagram appears
in Section T, page T 1.2.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 Q1.15
DCP & Accessories Antennas and Solar Panels Grounding Equipment

DCP & Accessories
Antennas and Solar Panels
Grounding Equipment
SUTRON 8210 DATA-
COLLECTION PLATFORM
WITH PHONE/SPEECH
MODEM
8105050
The 8210 is packaged in a NEMA 4 fiberglass enclosure with a front panel display and keypad
for easy data viewing and setup. Data input is supported through two shaft encoder inputs,
two SDI-12 inputs, a dedicated solar panel input, eight analog-to-digital inputs, five switch
closure inputs, switched power output, and an external RS-232 port.
The phone/speech modem allows 2-way communications for voice and data. The modem
may be set up to answer a call in the voice mode and respond to queries in a user-defined
manner. An interactive dialog can be set up with the caller pressing keys and the 8210
responding with data or other commands. Sensor connections are made through the wiring
strip located on the right side of the unit. The 8210 has battery-backed on-board memory for
storing 62,000 readings. If desired, stored data can be retrieved, or programs downloaded,
through the RS-232 port or by using a PCMCIA data card. Data card not included ( see Stock
No. 5205050). Power is provided from an external 12-volt supply. The operating
temperature range is -40 to 60 degrees Celsius.
FYI: Save time and money on repairs for this item: Return to the HIF.
To identify associated
components with this item,
a system diagram appears
in Section T, page T 1.2.
Q1.16 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Q2 Antennas and Solar Panels
Q2.1
DCP & Accessories Antennas and Solar Panels Grounding Equipment

DCP & Accessories
Antennas and Solar Panels
Grounding Equipment
RADIO FREQUENCY (RF)
CONNECTOR
8104001
This connector makes it possible to attach a DCP antenna cable to a DCP with a 90-degree
bend at the DCP.
HELICAL GOES ANTENNA (TOP
HAT)
8104015
GOES antenna, Helical (top hat) type, 401.7 to 402.1 MHz, coaxial type N, female jack
connector. Unit comes with mounting hardware to fit 2-inch diameter pipe. Does not include
antenna cable (Stock No. 8104050) which must be ordered separately.
X-YAGI ANTENNA WITH
MOUNTING KIT
8104020
X-YAGI antenna with mounting kit. Does not include antenna cable (Stock No. 8104050)
which must be ordered separately.
Q2.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

ANTENNA CABLE
8104050
Connects the DCP to the antenna. Cable length is 15 feet.
X-YAGI ANTENNA ELEMENT
REPLACEMENT PACK
8104060
X-YAGI antenna element replacement pack. Each pack contains one element for each
antenna band (for example, band 1; 2; 3; 4; 5). Each element is a different length and is
coded by the "number of bands" on the non-threaded end.
SOLAR PANEL
8104080
Solar panel, 20 watt, 1.17A, and 17.1V includes 12-volt ASC-12/4 regulator and seasonably
adjustable side of pole mount
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 Q2.3
DCP & Accessories Antennas and Solar Panels Grounding Equipment

DCP & Accessories
Antennas and Solar Panels
Grounding Equipment
.
Helpful
Informative
Fact!
Did You Know?
$$$ SAVINGS $$$
Battery costs under the USGS contract
are much less than commercial prices.
Q2.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Q3 Grounding Equipment
Q3.1
DCP & Accessories Antennas and Solar Panels Grounding Equipment

Grounding Grounding Equipment Equipment
Antennas and Solar Panels
DCP & Accessories
GROUNDING KIT FOR
ELECTRONIC EQUIPMENT
8106010
Kit contains 1 tech sheet, 1 ground copper rod 5/8-inch diameter by 8 feet long, 1 ERICO
Cadweld One Shot exothermic welding connection, 15 feet coiled grounding conductor (#6
AWG solid, bare soft annealed copper wire), 1 grounding bus bar with screws, 2 stainless
steel lag bolts, 5 closed end splices, 12 ring tongue terminals for #12 AWG conductor and
20 feet of #12 AWG hook up wire.
VIDEOS “HOW TO
CADWELD ONE SHOT”
8106012
A total of two videos, one 6-minute video, "Cadweld One-Shot Connections," explains how
to perform a Cadweld one shot exothermic weld used in grounding kit, and one 45-minute
video, "How to Cadweld--An Easy Connection to Make," explains the exothermic weld in
greater details.
Q3.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

CONTAX
8106014
Contax is an oxide-inhibiting compound applied to the two parts being connected.
For use with grounding kit.
GROUND ENHANCEMENT
MATERIAL (GEM)
8106016
Ground enhancement material (GEM) is mixed with water (like cement) and hardens
(like concrete). To be used with grounding kit.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 Q3.3
DCP & Accessories Antennas and Solar Panels
Grounding Equipment

Grounding Grounding Equipment Equipment
Antennas and Solar Panels
DCP & Accessories
CADWELD ONE SHOT FOR
THREE NO. 6 AWG
8106018
Cadweld one shot used to connect three (No. 6 AWG) grounding conductors to grounding
rod. For use with grounding kit.
GROUNDING CONDUCTOR
NO. 6 AWG
8106020
Grounding conductor No. 6 AWG bare, solid, soft, annealed copper wire. For use with
grounding kit. Sold by the foot.
GROUNDING ROD
8106022
Grounding rod, copper bonded to high carbon steel, 5/8-inch diameter by 8 feet long.
Q3.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

CADWELD ONE SHOT FOR
ONE NO. 6 AWG
8106024
Cadweld one shot used to connect one No. 6 AWG grounding conductor to grounding rod.
For use with grounding kit.
GROUND BUS BAR
8106026
Ground bus bar consists of lug to connect No. 6 AWG grounding conductor and 12 screws
to mount ring-tongue terminals from instrument grounding wire. For use with grounding
kit.
HOOK-UP WIRE FOR NO.
12 AWG
8106030
Hookup wire, No. 12 AWG. Used to connect instrument to bus bar conductor. For use with
grounding kit.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 Q3.5
DCP & Accessories Antennas and Solar Panels
Grounding Equipment

Grounding Grounding Equipment Equipment
Antennas and Solar Panels
DCP & Accessories
STRIKER FOR CADWELD
ONE SHOT
8106031
Striker for Cadweld One Shot. Safely and easily ignites the one shot connector. One spare
flint is included. For use with grounding kit.
One flint for striker used to ignite the Cadweld One Shot.
FLINT FOR CADWELD
ONE SHOT
8106032
GROUND ROD DRIVING
SLEEVE
8106033
Ground rod driver used to drive a rod from ground level without damage to the rod tip.
Q3.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

R NAWQA GW SamplingKits
and Accessories
• R1 NAWQA GW Sampling Kits
• R2 NAWQA Kit Accessories
Section R
NAWQA GW Sampling Kits and Accessories

NAWQA GW Sampling Kits and Accessories
Solid Phase Extraction (SPE)
Field Kit .....................................R1.2
Garden-Hose Connection Kit .............R1.3
Pump/Reel-Tubing End-Fitting
Kit ............................................R1.4
Anti-Back Siphon Valve Kit ...............R1.5
Sample-Line Extension Kit ................R1.6
Flow Manifold Kit ............................R1.8
Turbidity-Sample Tube Kit ...............R1.10
Flow Manifold-Tube To HIF
Flow-Through Chamber Kit .........R1.11
Sample-Collection Chamber Kit:
Components ..............................R1.12
Doc-Soc Filtration Unit Kit ................R1.15
Nitrogen Delivery System Kit ............R1.16
Radon Sample Collector Kit ..............R1.18
Tufflite Adapter ..............................R2.2
Swagelok Female Connector ............R2.2
Tubing, Teflon, Smooth Wall
(0.375 ID) ..................................R2.3
Quick-Connect Stem, Full-Flow
Type (0.500 OD) .......................R2.4
Quick-Connect Body, Full-Flow
Type (1/2 NPT) ..........................R2.4
Check Valve, All Teflon ....................R2.5
Quick-Connect Stem, Full-Flow
Type (1/2 NPT) ..........................R2.5
Quick-Connect Body, Full-Flow
Type (0.500 OD) ........................R2.6
Swagelok Female Connector ............R2.6
Valve, Three-Way Stopcock .............R2.7
Flaring Tool ....................................R2.7
Tubing, Amber Latex .......................R2.8
Section R
SECTION CONTENTS
Plastic Panel ...................................R2.8
Nylon Tie Straps .............................R2.9
Quick-Connect Stem, Full-Flow
Type .........................................R2.9
Male Pipe to Hose Barb
Connector .................................R2.10
Band Clamp, Screw Driven ...............R2.10
Tubing, Convoluted .........................R2.11
Swagelok Male Adapter ...................R2.11
Tee, Teflon ....................................R2.12
Tubing, Teflon, Smooth Wall
(0.500 ID) ..................................R2.12
Quick-Connect Stem ........................R2.13
Filter Unit .......................................R2.13
Quick-Connect Body ........................R2.14
Male NPT Hose Adapter ...................R2.14
Hose, 0.250 ID by 7/16
(1/2 inch) OD by 11 ft .................R2.15
Tube Adapter .................................R2.15
Gas Filter, Inline, Refillable ..............R2.16
Gas Filter Refill Kit ...........................R2.16
Gas Filter Spring Clip .......................R2.17
Plug Valve ......................................R2.17
Swagelok Female Run Tee ..............R2.18
Septa ............................................R2.18
Tray, Polypropylene ........................R2.19
Poly Bags .......................................R2.19
Teflon Bag .....................................R2.20
Field Decontamination and
Blanking Cylinder ........................R2.20
Spectrophotometer .........................R2.21
Parafilm .........................................R2.21

R1 NAWQA GW Sampling Kits
R1.1
NAWQA GW Sampling Kits NAWQA Kit Accessories

NAWQA Kit Accessories NAWQA GW Sampling Kits
SOLID PHASE EXTRACTION
(SPE) FIELD KIT
4301001
The solid phase extraction (SPE) field kit is designed to extract pesticides from
filtered water samples. The kit contains the following equipment. (Note: Carrying
case is not included.)
Quantity Description
1 Ohaus CT6000 Portable Electronic Balance – 6010-gram
capacity
1 Volac 1 – 10-mL Digital High-Precision Dispenser with bottle
2 Inline fuse holder with 20-Amp fuse
2 Teflon-FEP corrugated tubing, ¼ inch OD, 4 feet long
1 Teflon-FEP tubing, 1/8-inch OD, 10 feet long
2 250-mL Teflon-FEP wash bottle
2 Teflon-PFA ¼-inch to 3/8-inch NPT fitting
1 4½-inch stainless steel tweezers
1 SPE cartridge adapter
6 4-Amp cartridge fuse
1 ¼-28 to ¼-28 Tefzel union
2 Swagelok stainless steel compression fitting, ¼-inch tubing
to ¼-inch NPT
1 Tefzel female luer fitting, 1/8-28
1 Tefzel male luer fitting, 1/8
2 PTFE flow-control valve
1 Powder-free, anti-static, clean-room vinyl gloves, pack of
100 gloves
5 60-cc Disposable syringe
1 25-mL Graduated glass cylinder
1 50-mL Graduated glass cylinder
1 142-mm Aluminum filter holder
1 130-mL/min Ceramic piston metering pump
1 576-mL/min Ceramic piston metering pump
1 1/8-inch Teflon Pump head adapter, pair
R1.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

GARDEN-HOSE CONNECTION KIT
CSK001 *
This Garden-Hose Connection Kit is used to connect sampling set-up to garden-hose
type threaded faucet to collect sample. Kit contains garden-hose adapter, tube
fitting, Teflon tube, and quick-connect stem. Shipped unassembled.
Kit Contents
Stock No. Item Description Unit Quantity
CS1001 ADAPTER, TUFFLITE pkg 1
Female Garden Hose thread to 3/4-
Male Pipe thread. Dixon
Manufacturing P/N TA976
(Pkg. contains 100 adapters)
NOTE: It is suggested that each Sampling Unit have 100 or more of these.
They are single-use items. Discard after one use, as they cannot be
properly cleaned with organic solvents if contaminated.
CS1002 SWAGELOK FEMALE CONNECTOR, each 1
STAINLESS STEEL
3/4 NPT Female pipe to 0.500 OD
tube Swagelok P/N SS-810-7-12
CS1003 TUBING, TEFLON, SMOOTH WALL each 1
0.500 OD by 0.062 wall (0.375 ID)
by 6-in. long Cole-Parmer #06375-07
CS1004 QUICK-CONNECT STEM, STAINLESS STEEL each 1
FULL-FLOW TYPE
(No shutoffs either end) with
Swagelok fitting to fit 0.500 OD
tube Swagelok P/N SS-QF8-S-810
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R1.3
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA Kit Accessories NAWQA GW Sampling Kits
PUMP/REEL-TUBING END-FITTING KIT
CSK002 *
The Pump/Reel-Tubing End-Fitting Kit is used to connect 0.625 OD pump/reel
tubing outflow to anti-back siphon valve, or to extension tubing (0.500 OD tube with
quick-connect fittings) that carries the sample to the flow manifold. Kit contains
female adapter and quick-connect stem. Shipped unassembled.
Kit Contents
Stock No. Item Description Unit Quantity
CS1009 SWAGELOK FEMALE CONNECTOR, each 1
STAINLESS STEEL
0.625 OD tube to 1/2-NPT Female
pipe. Swagelok P/N SS-1010-7-8
CS1007 QUICK-CONNECT STEM, STAINLESS STEEL, each 1
FULL-FLOW TYPE
(No shutoffs either end) with 1/2-
NPT Male pipe thread. Swagelok
P/N SS-QF8-S-8PM
Assembly Procedure
1. Assemble Swagelok Female Connector to Quick-Connect Stem.
Anti-back siphon valve
Study-Unit Assembly required:
1. Assemble Swagelok Female Connector to pump/reel hose outlet end.
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
R1.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

ANTI-BACK SIPHON VALVE KIT
CSK003 *
The Anti-Back Siphon Valve Kit is used to prevent backflow from the sampling
system to a water well system that is being sampled. Also used as part of the
cleaning apparatus when a pump without internal check-valve is used. Required for
any pump not equipped with an anti-siphon device. (NOTE: USGS could be held
responsible for contaminating a well if the pump does not have an
antisiphon device.)
Kit contains Teflon check-valve assembly with quick-connects on both ends. Shipped
unassembled.
Kit Contents
Stock No. Item Description Unit Quantity
CS1005 QUICK-CONNECT BODY, STAINLESS STEEL, each 1
FULL-FLOW TYPE
(No shutoffs either end) with 1/2-NPT
Male pipe thread
CS1006 CHECK VALVE, ALL TEFLON each 1
CS1007 QUICK-CONNECT STEM, STAINLESS STEEL, each 1
FULL-FLOW TYPE
(No shutoffs either end) with 1/2-NPT
Male pipe thread.
NOTE: Please be warned that the small stainless steel nuts on the valve
can loosen from pump vibration. Tighten the nuts and recheck them on a
regular basis. Do not flatten the ends of the bolts to hold the nuts on.
Valve disassembly might be required if the valve becomes clogged with
mud or sand.
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R1.5
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA Kit Accessories NAWQA GW Sampling Kits
SAMPLE-LINE EXTENSION KIT
CSK004 *
The Sample-Line Extension Kit allows increased distance between different parts of
the sampling apparatus. The purpose of the kit is to
• Connect the Pump/Reel line outlet or the Garden-Hose Connector and
Anti-back siphon Valve outlet to the Flow Manifold inlet.
• Connect the Flow Manifold outlet to the HIF Flow-Through Chamber inlet.
• Connect the Flow Manifold outlet to the Sample-Collection Chamber inlet.
Kit contains a section of teflon tubing (length specified by user), and full-flow (nonshutoff)
quick-connect-body on one end, stem on other end. Shipped unassembled.
[It is suggested that each Study Unit (team) have at least 4 of these
assemblies. Each extension should be 10-15 feet long, but can be made
longer or shorter as desired.]
NOTE: This kit price allows for one foot of tubing (Stock No. CS1003). Any
amount of tubing can be purchased. Indicate amount of tubing needed in
Comments on check-out and adjust kit price accordingly.
(Continued on next page.)
R1.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Sample-Line Extension Kit (continued)
Kit Contents
Stock No. Item Description Unit Quantity
CS1008 QUICK-CONNECT BODY, STAINLESS STEEL, each 1
FULL-FLOW TYPE
(No shutoffs either end) with
Swagelok fitting to fit 0.500-OD
tube.
CS1003 TUBING, TEFLON, SMOOTH WALL ft 1
0.500 OD by 0.062 wall (0.375 ID)
CS1004 QUICK-CONNECT STEM, STAINLESS STEEL, each 1
FULL-FLOW TYPE
(No shutoffs either end) with
Swagelok fitting to fit 0.500-OD
tube
Assembly Procedure
1. Assemble Quick-Connect Body to one end of Teflon Tubing.
2. Assemble Quick-Connect Stem to other end of Teflon Tubing.
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R1.7
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA Kit Accessories NAWQA GW Sampling Kits
FLOW MANIFOLD KIT
CSK005 *
(Continued on next page.)
R1.8 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

FLOW MANIFOLD KIT (continued)
The Flow Manifold Kit is used to route flow of water sample from the source to:
waste; turbidity sample tube or HIF flow-through chamber during purging; or
sample chamber or radon sampler following purging. The kit contains Flow-control
valves, full-flow quick-connects, 0.500-OD teflon tubing, wastewater tubing, and
mounting board. Shipped unassembled.
Kit Contents
Stock No. Item Description Unit Quantity
CS1010 VALVE, TEFLON, THREE-WAY STOPCOCK each 2
To fit 0.500-OD tube
CS1011 FLARING TOOL REQUIRED TO ASSEMBLE each 1
TUBE TO VALVE
NOTE: One flaring tool is
required to assemble the tubes
to the valves.
CS1008 QUICK-CONNECT BODY, STAINLESS STEEL, each 3
FULL-FLOW TYPE
(No shutoffs either end) with
Swagelok fitting to fit 0.500-OD
tube.
CS1003 TUBING, TEFLON, SMOOTH WALL each 1
0.500 OD by 0.062 wall (0.375 ID)
by 3 feet long.
CS1012 TUBING, AMBER LATEX each 1
0.750 ID by 0.187 wall by 15 feet
long.
CS1013 PLASTIC PANEL each 1
14 by 14 by 0.25 thick. Lexan or
similar plastic.
CS1014 NYLON TIE STRAPS pkg 1
140 wide by 8 (nominal) long.
Package of 10.
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R1.9
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA Kit Accessories NAWQA GW Sampling Kits
TURBIDITY-SAMPLE TUBE KIT
CSK006 *
The Turbidity-Sample Tube Kit is used to collect turbidity samples. (During purging,
flow is briefly diverted from the HIF flow-through chamber to this tube to collect a
turbidity sample, then back to HIF flow-through chamber.) The kit contains Stainless
Steel (SS) Quick-Connect Stem, (SS) pipe-to-hose-barb connector, hose clamp, and
0.500-OD Convoluted Teflon tubing. Shipped unassembled.
Kit Contents
Stock No. Item Description Unit Quantity
CS1015 QUICK-CONNECT STEM, STAINLESS STEEL, each 1
FULL-FLOW TYPE
(No shutoffs either end) with 1/2-
NPT Female pipe threads
CS1016 MALE PIPE TO HOSE BARB CONNECTOR, each 1
STAINLESS STEEL
1/2-NPT Male pipe threads to 0.375
hose barb.
CS1017 BAND CLAMP, SCREW DRIVEN each 1
CS1018 TUBING, CONVOLUTED, TEFLON each 1
0.500 OD by 0.375 ID by 5 feet
long
NOTE: Item CS1018 is cut in half for assembly. One piece of tubing is
enough for two assemblies. The free end of the convoluted tube is simply
placed in the sample bottle. No fitting is required.
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
R1.10 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

FLOW MANIFOLD-TUBE TO
HIF FLOW-THROUGH CHAMBER KIT
CSK007 *
The Flow Manifold-Tube to HIF Flow-Through Chamber Kit is used during purging to
transfer liquid from the flow manifold to the HIF flow-through chamber. (The HIF
flow-through chamber holds pH, dissolved oxygen, temperature, and specific
conductance probes used with the USGS Minimonitor.)
The kit contains 0.500 OD smooth Teflon tubing, one Full-Flow Quick-Connect Stem,
and Adapter. Shipped unassembled.
NOTE: The flow-through chamber (Stock No. 6301001) is not supplied
as part of this package.
Kit Contents
Stock No. Item Description Unit Quantity
CS1003 TUBING, TEFLON, SMOOTH WALL each 1
0.500 OD by 0.062 wall (0.375 ID)
by 3 ft.
CS1004 QUICK-CONNECT STEM, STAINLESS STEEL, each 1
FULL-FLOW TYPE
(No shutoffs either end) with
Swagelok fitting to fit 0.500 OD
tube.
CS1019 SWAGELOK MALE ADAPTER, STAINLESS each 1
STEEL
0.500 OD tube to 3/4 NPT Male pipe.
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R1.11
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA Kit Accessories NAWQA GW Sampling Kits
SAMPLE-COLLECTION CHAMBER KIT:
COMPONENTS
CSK008 *
(Continued on next page.)
R1.12 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

SAMPLE-COLLECTION CHAMBER KIT: COMPONENTS (continued)
The Sample-Collection Chamber Kit: Components purpose is to collect water sample
in a clean environment. The kit contains two sections:
• Section 1: Sample-wetted parts.
• Section 2: The chamber framework, and field-fabricated PVC or CPVC tube
frame. (These items, with the exception of item CS1020, are to be obtained
at a local hardware store. See Section 2 under Kit Contents below.) Shipped
unassembled.
Kit Contents
Section 1: Sample-Wetted Parts.
Consisting of: Teflon Valve, Teflon Tee, and Teflon Tubing (0.500 and 0.625 OD sizes).
Stock No. Item Description Unit Quantity
CS1010 VALVE, TEFLON, THREE-WAY STOPCOCK each 1
To fit 0.500 OD tube. Cole-Parmer
P/N M-30501-47
CS1011 FLARING TOOL REQUIRED TO ASSEMBLE each 1
TUBE TO VALVE
Cole-Parmer P/N M-07148-47
NOTE: One flaring tool is
required to assemble the tube
to the valve.
CS1020 TEE, TEFLON each 1
Cole-Parmer P/N M-06469-54
CS1003 TUBING, TEFLON, SMOOTH WALL each 1
0.500 OD by 0.062 wall (0.375 ID)
by 3.5 ft long. Cole-Parmer
#06375-07
CS1021 TUBING, TEFLON, SMOOTH WALL ft 1
0.625 OD by 0.062 wall (0.500 ID)
CS1004 QUICK-CONNECT STEM, STAINLESS STEEL, each 1
FULL-FLOW TYPE
(No shutoffs either end) with
Swagelok fitting to fit 0.500 OD
tube. Swagelok P/N SS-QF8-S-810
CS1014 NYLON TIE STRAPS pkg 1
0.140 wide by 8 (nominal) long.
Package of 10. Thomas & Betts
P/N TY-5242M
(Continued on next page.)
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R1.13
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA Kit Accessories NAWQA GW Sampling Kits
SAMPLE-COLLECTION CHAMBER KIT: COMPONENTS (continued)
Kit Contents
Section 2: Framework
Consisting of: 1/2-inch Schedule 40 CPVC pipe, elbows and tees
All parts (Except Stock No. CS1020) are readily available at most hardware stores,
and are to be obtained locally.
Item Description Unit Quantity
PIPE, CPVC, 1/2-INCH SCHEDULE 40 each 1
21 feet long (stock length - can be cut for transport)
ELBOW, CPVC, 1/2-INCH SCHEDULE 40 each 8
'Slip' style for assembly with PVC primer and cement.
TEE, CPVC, 1/2-INCH SCHEDULE 40 each 4
'Slip' style for assembly with PVC primer and cement.
MALE ADAPTER, CPVC, 1/2-INCH SCHEDULE 40 each 2
'Slip' style one end, 1/2-NPT male threads other end.
PVC/CPVC pipe primer (See note below)
PVC/CPVC pipe cement (See note below)
Stock No. CS1020 TEFLON TEE, (from Section 1) each 1
COLE-PARMER #06375-07
NOTE: If used, then the glued frame should be cured several days in a
warm, well-ventilated area away from other sampling equipment, then
liquinox--tap-water washed, tap-water rinsed (3x) to remove detergent
solution, DI-water rinsed to remove tap-water residue, air dried in a clean
environment, and bagged for storage before use. When storage bag is reopened
check to ensure no glue-residue aroma can be detected.
*This item must be ordered through One Stop Shopping:http://1stopl.usgs.gov
R1.14 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

DOC-SOC FILTRATION UNIT KIT
CSK009 *
Doc-Soc Filtration Unit Kit is for obtaining filtered DOC.DOC/SOC samples using N2 gas.
Kit contains filtration unit and quick-connect stem. Shipped unassembled
Kit Contents
Stock No. Item Description Unit Quantity
CS1022 QUICK-CONNECT STEM, STAINLESS STEEL each 1
Double End Shut Off (DESO), with
1/8-NPT Male pipe thread.
Swagelok P/N SS-QC4-D-2PM
CS1023 FILTER UNIT, STAINLESS STEEL each 1
1/8-NPT Female pipe threads in
each end cap. Supplied from
Gelman with 0.250 hose barb
adapter and 10-mm smooth funnel
stem. Gelman P/N 4280
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R1.15
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA Kit Accessories NAWQA GW Sampling Kits
NITROGEN DELIVERY SYSTEM KIT
CSK010 *
NITROGEN DELIVERY SYSTEM KIT is used to introduce nitrogen into the DOC/SOC
Filtration Unit (Stock No. CSK009) in a controlled and safe manner. Kit contains
Quick-Connect Body, Hose, Filter, and Fittings. Shipped unassembled.
Kit Contents
Stock No. Item Description Unit Quantity
CS1024 QUICK-CONNECT BODY, STAINLESS STEEL each 1
Double End Shut Off (DESO), with
1/4-NPT Female NPT pipe fitting
Swagelok
P/N SS-QC4-B-4PF
CS1025 MALE NPT HOSE ADAPTER, STAINLESS STEEL each 2
0.250 flexible hose barb to 1/4-NPT
Male pipe Cajon P/N SS-4-HC-1-4
CS1026 HOSE, 0.250 ID by 7/16 (1/2 IN.) OD by 11 FT each 1
Working pressure 350 psi Swagelok
P/N PB-4
(Continued on next page.)
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
R1.16 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

NITROGEN DELIVERY SYSTEM KIT (Continued)
Stock No. Item Description Unit Quantity
CS1017 BAND CLAMP, SCREW DRIVEN each 4
Swagelok P/N MS-HCC-6
CS1028 TUBE ADAPTER, STAINLESS STEEL each 2
0.250 Swagelok tube stub to 0.250
hose barb fitting Cajon P/N SS-4-
HC-A-401
CS1029 GAS FILTER, INLINE, REFILLABLE each 1
14 IN LONG, 400 CC
Swagelok fittings each end to fit
0.250 OD tube VWR Scientific P/N
32574-542 LabClear #RGF-250-400
CS1030 REFILL KIT (400 CC) FOR CS1029 each 1
VWR Scientific P/N 32574-826
LabClear #RK-400
CS1031 SPRING CLIP, TO FIT CS1029 each 1
VWR Scientific P/N 32574-101
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R1.17
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA Kit Accessories NAWQA GW Sampling Kits
RADON SAMPLE COLLECTOR KIT
CSK011 *
Radon Sample Collector Kit is used to collect radon sample flow at manifold. Kit
contains plug valve, run tee, septum port (in tee branch), teflon tubing, and quickconnect
stem. Shipped unassembled.
Kit Contents
Stock No. Item Description Unit Quantity
CS1032 PLUG VALVE, BRASS each 1
Male 1/2-NPT Male pipe threads
both ends Nupro P/N B-8P6T2
CS1033 SWAGELOK FEMALE RUN TEE, BRASS each 1
0.500 OD tube to 1/2-NPT Female
Swagelok P/N B-810-3-8TFT
CS1003 TUBING, TEFLON, SMOOTH WALL each 1
0.500 OD by 0.062 wall (.375 ID) by 4
in. long Cole-Parmer #06375 07
CS1004 QUICK-CONNECT STEM, STAINLESS STEEL, each 1
FULL-FLOW TYPE (No shutoffs
either end) with Swagelok fitting to
fit 0.500 OD tube Swagelok P/N
SS-QF8-S-810
CS1034 SEPTA, 18-MM DIAMETER pkg 1
Package of 10 Diagger Scientific
P/N G28477D
NOTE: The syringe and syringe needle are to be supplied by the user.
The following source has been suggested: Diagger Scientific (800)-621-7193.
• G23499E Glass syringe, metal leur tip, 30ml w/1cc grads.
(Buy two per crew, parts [barrel and stock] are interchangeable.)
• G23512J Hypo needle, 22 gauge, 1 in. length, leur lock
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
R1.18 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

R2 NAWQA Kit Accessories
R2.1
NAWQA GW Sampling Kits NAWQA Kit Accessories

NAWQA GW Sampling Kits
NAWQA Kit Accessories
TUFFLITE ADAPTER
CS1001 *
Female garden hose thread to 3/4-NPT Male pipe thread. Each package contains
100 adapters.
NOTE: It is suggested that each Sampling Unit have 100 or more adapters.
These are single-use items and must be discarded after one use. They
cannot be properly cleaned with organic solvents if they become
contaminated.
Applications
This item is included in Stock No. CSK001, Garden-Hose Connection.
SWAGELOK FEMALE
CONNECTOR
CS1002 *
Swagelok Female Connector, stainless steel, is a 3/4 NPT female pipe to 0.500 OD
tube.
Applications
This item is included in Stock No. CSK001, Garden-Hose Connection.
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
R2.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Tubing, Teflon, smooth wall, 0.500 OD by 0.062 wall (0.375 ID).
Applications
This item is included in the following kits:
TUBING, TEFLON,
SMOOTH WALL
(0.375 ID)
CS1003 *
Stock No. Description Tubing Lengths Needed
CSK001 Garden-Hose Connection 6 inches
CSK004 Sample-Line Extension (Any amount desired)
CSK005 Flow Manifold 3 feet
CSK007 Tube, Flow Manifold to HIF Flow- 3 feet
Through Chamber
CSK008 Sample-Collection Chamber: Components 3.5 feet
CSK011 Radon Sample Collector 4 inches
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R2.3
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA GW Sampling Kits
NAWQA Kit Accessories
QUICK-CONNECT
STEM, FULL-FLOW
TYPE
(0.500 OD)
CS1004 *
Used to connect 0.500 OD pump/reel tubing outflow to anti-back siphon valve, or to
extension tubing that carries sample to the flow manifold. Stainless steel. No
shutoffs either end, with Swagelok fitting to fit 0.500 OD tube.
Applications
This item is included in the following kits:
Stock No. Description
CSK001 Garden-Hose Connection
CSK004 Sample-Line Extension
CSK007 Tube, Flow Manifold to HIF Flow-Through Chamber
CSK008 Sample-Collection Chamber: Components
CSK011 Radon Sample Collector
Tips for Techs
Study-unit assembly required: Assemble Quick-Connect Stem to pump/reel hose
outlet end.
QUICK-CONNECT
BODY, FULL-FLOW
TYPE
(1/2 NPT)
CS1005 *
No shutoffs either end, with 1/2-NPT male pipe thread. Stainless steel.
Applications
This item is included in Stock No. CSK003, Anti-back Siphon Valve.
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
R2.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Check valve, all Teflon.
Applications
This item is included in Stock No. CSK003, Anti-back Siphon Valve.
CHECK VALVE,
ALL TEFLON
CS1006 *
QUICK-CONNECT
STEM, FULL-FLOW
TYPE
(1/2 NPT)
CS1007 *
No shutoffs either end, stainless steel, with 1/2-NPT female pipe thread.
Applications
This item is included in the following kits:
Stock No. Description
CSK002 Pump/Reel Tubing End Fitting
CSK003 Anti-Back Siphon Valve
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R2.5
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA GW Sampling Kits
NAWQA Kit Accessories
QUICK-CONNECT
BODY, FULL-FLOW
TYPE (0.500 OD)
CS1008 *
No shutoffs, either end, stainless steel, with Swagelok fitting to fit 0.500 OD tube.
Applications
This item is included in the following kits:
Stock No. Description Number Needed
CSK004 Sample-Line Extension 1
CSK005 Flow Manifold 3
Stainless steel, 0.625 OD tube to 1/2-NPT female pipe.
Applications
SWAGELOK FEMALE
CONNECTOR
CS1009 *
This item is included in Stock No. CSK002, Pump/Reel Tubing End Fitting.
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
R2.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Teflon, to fit 0.500 OD tube.
Applications
This item is included in the following kits:
Stock No. Description
CSK005 Flow Manifold
CSK008 Sample-Collection Chamber: Components
VALVE, THREE-WAY
STOPCOCK
CS1010 *
FLARING TOOL
CS1011 *
NOTE: One flaring tool is required to assemble the tubes to the valves.
Applications
This item is included in the following kits:
Stock No. Description
CSK005 Flow Manifold
CSK008 Sample-Collection Chamber: Components
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R2.7
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA GW Sampling Kits
NAWQA Kit Accessories
Tubing, amber latex, 0.750 ID by 0.187 wall by 15 feet long.
Applications
This item is included in Stock No. CSK005, Flow Manifold.
Panel, lexan or similar plastic, 14 by 14 by 0.25 inches thick.
Applications
This item is included in Stock No. CSK005, Flow Manifold.
TUBING, AMBER
LATEX
CS1012 *
PLASTIC PANEL
CS1013 *
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
R2.8 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Nylon tie straps, 0.140 wide by 8 (nominal) long, package of 10
Applications
This item is included in the following kits:
Stock No. Description
CSK005 Flow Manifold
CSK008 Sample-Collection Chamber: Components
NYLON TIE STRAPS
CS1014 *
QUICK-CONNECT
STEM, FULL-FLOW
TYPE
CS1015 *
Quick-connect stem, stainless steel, full-flow type, (no shutoffs either end) with
1/2-NPT female pipe threads.
Applications
This item in included in Stock No. CSK006, Turbidity-Sample Tube.
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R2.9
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA GW Sampling Kits
NAWQA Kit Accessories
MALE PIPE TO
HOSE BARB
CONNECTOR
CS1016 *
Male pipe to hose barb connector, stainless steel, 1/2-NPT male pipe threads to
0.375 hose barb.
Applications
This item is included in Stock No. CSK006, Turbidity-Sample Tube.
Band clamp, screw driven.
Applications
This item is included in Stock No. CSK006, Turbidity-Sample Tube.
BAND CLAMP,
SCREW DRIVEN
CS1017 *
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
R2.10 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Tubing, convoluted, teflon, 0.500 OD by 0.375 ID by 5 feet long.
Applications
This item is included in Stock No. CSK006, Turbidity-Sample Tube.
TUBING,
CONVOLUTED
CS1018 *
NOTE: This item is cut in half for assembly. One piece of tubing is enough
for two assemblies. The free end of the convoluted tube is simply placed
in the sample bottle. No fitting is required.
SWAGELOK MALE
ADAPTER
CS1019 *
Swagelok male adapter, stainless steel, 0.500 OD tube to 3/4 NPT male pipe.
Applications
This item is included in Stock No. CSK007, Tube, Flow Manifold to HIF Flow-Through
Chamber.
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R2.11
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA GW Sampling Kits
NAWQA Kit Accessories
Tee, teflon
Applications
TEE, TEFLON
CS1020 *
This item is included in Stock No. CSK008, Sample-Collection Chamber:
Components.
Tubing, teflon, smooth wall, 0.625 OD by 0.062 wall (0.500 ID)
Applications
TUBING, TEFLON,
SMOOTH WALL
(0.500 ID)
CS1021 *
This item is included in Stock No. CSK008, Sample-Collection Chamber:
Components.
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
R2.12 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

QUICK-CONNECT
STEM
CS1022 *
Quick-connect stem, stainless steel, Double End Shut Off (DESO), with 1/8-NPT
male pipe thread.
Applications
This item is included in Stock No. CSK009, DOC-SOC Filtration Unit.
FILTER UNIT
CS1023 *
Filter unit, stainless steel, 1/8-NPT female pipe threads in each end cap. Supplied
from Gelman with 0.250 hose barb adapter and 10-mm smooth funnel stem.
Applications
This item is included in Stock No. CSK009, DOC-SOC Filtration Unit.
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R2.13
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA GW Sampling Kits
NAWQA Kit Accessories
QUICK-CONNECT
BODY
CS1024 *
Quick-connect body, stainless steel, Double End Shut Off (DESO), with 1/4-NPT
female NPT pipe fitting.
Applications
This item is included in Stock No. CSK010, Nitrogen Delivery System.
MALE NPT HOSE
ADAPTER
CS1025 *
Male NPT hose adapter, stainless steel, 0.250 flexible hose barb to 1/4-NPT Male
pipe.
Applications
This item is included in Stock No. CSK010, Nitrogen Delivery System.
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
R2.14 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

HOSE, 0.250 ID BY
7/16 (1/2 INCH)
OD BY 11 FT
CS1026 *
Hose, 0.250 ID by 7/16 (1/2 inch) OD by 11 ft, working pressure 350 psi.
Applications
This item is included in Stock No. CSK010, Nitrogen Delivery System.
TUBE ADAPTER
CS1028 *
Tube adapter, stainless steel, 0.250 Swagelok tube stub to 0.250 hose barb fitting.
Applications
This item is included in Stock No. CSK010, Nitrogen Delivery System.
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R2.15
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA GW Sampling Kits
NAWQA Kit Accessories
GAS FILTER,
INLINE,
REFILLABLE
CS1029 *
Gas filter, inline, refillable, 14 in. long, 400 cc, Swagelok fittings each end to fit
0.250 OD tube.
Applications
This item is included in Stock No. CSK010, Nitrogen Delivery System.
Refill kit (400 cc) for gas filter, Stock No. CS1029
Applications
This item is included in Stock No. CSK010, Nitrogen Delivery System.
GAS FILTER
REFILL KIT
CS1030 *
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
R2.16 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Spring clip, to fit gas filter, Stock No. CS1029.
Applications
This item is included in Stock No. CSK010, Nitrogen Delivery System.
Plug valve, brass, male 1/2-NPT, male pipe threads both ends.
Applications
This item is included in Stock No. CSK011, Radon Sample Collector.
GAS FILTER SPRING
CLIP
CS1031 *
PLUG VALVE
CS1032 *
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R2.17
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA GW Sampling Kits
NAWQA Kit Accessories
Swagelok female run tee, brass, 0.500 OD tube to 1/2-NPT Female.
Applications
This item is included in Stock No. CSK011, Radon Sample Collector.
Septa, 18mm diameter
Applications
This item is included in Stock No. CSK011, Radon Sample Collector.
SWAGELOK
FEMALE
RUN TEE
CS1033 *
SEPTA
CS1034 *
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
R2.18 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

TRAY,
POLYPROPYLENE
CS1035 *
Large tray, polypropylene. Size: 21-3/4 by 16-3/4 by 5-1/4 inches.
Tips for Techs
It is suggested that each Study Unit purchase two of these.
POLY BAGS
CS1036 *
Large poly bags, similar to the bags dry-cleaners use to protect your clothes. 'Skins'
for sample and processing chambers, to be used once, then recycled. Size 21 by 4
by 38 inches.
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R2.19
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA GW Sampling Kits
NAWQA Kit Accessories
Small teflon bag, size 10 by 15 inches, one 10-inch side open.
Tips for Techs
It is suggested that each Sampling Unit purchase 5 bags.
TEFLON BAG
CS1037 *
FIELD DECONTAMINATION
AND BLANKING CYLINDER
CS1038 *
Field decontamination and blanking cylinder, 1.0 liter, clear, unmarked glass,
reinforced bottom.
Tips for Techs
It is suggested that each Study Unit have three for Grundfos, Keck, and Fulz pumps
with diameter less than 2-1/4 inches.
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
R2.20 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Spectrophotometer
Tips for Techs
1. It is suggested that each Sampling Unit have one.
SPECTROPHO-
TOMETER
CS1039 *
2. "UPDATE: FY94 Study Units that will be measuring turbidity in GW are to do so
using the Hach DP2100 turbidimeter (and nephelometric method). The DR200 is
not suitable for this purpose.--M.T. Koterba. NAWQA. QA-QC Specialist. February
10, 1995."
Parafilm roll, 2 inches wide by 250 ft long.
PARAFILM
CS1040 *
*This item must be ordered through One Stop Shopping: http://1stop.usgs.gov
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 R2.21
NAWQA GW Sampling Kits
NAWQA Kit Accessories

NAWQA GW Sampling Kits
NAWQA Kit Accessories
Helpful
Informative
Facts
Information Provided by the HIF
Did you know?
Anyone in the USGS may receive their own
personal copy of the WRD Instrument News.
Just call the HIF and ask!
R2.22 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

S Miscellaneous
• S1 Thermometers Digital, Hand-held
• S2 Rain Gage Tipping Bucket
• S3 Samplers (ISCO)
• S4 Electric Ground Testing Equipment
• S5 Gaging Station Accessories
• S6 Padlocks
• S7 Signs, Stencils, and Decals
• S8 Ice Chisels
• S9 Personal Safety Equipment
• S10 Altimeter and Barometer
Section S
Miscellaneous

Miscellaneous
SECTION CONTENTS
Digital Hand-Held Thermometer (Liquids Only) .................................................................S1.2
Digital Hand-Held Thermometer (General Purpose) ...........................................................S1.2
Tipping-Bucket Rain Gage................................................................................................S2.2
ISCO Model 3700 Sampler ...............................................................................................S3.2
Base Assembly With 350 mL Glass Bottles ........................................................................S3.2
Base Assembly With 1-Liter Glass Bottles..........................................................................S3.3
Base Assembly With 1-Liter Polypropylene Bottles .............................................................S3.3
Base Assembly With 1-Gallon Glass Containers .................................................................S3.4
Weighted Strainer ...........................................................................................................S3.4
Tygon Tubing .................................................................................................................S3.5
Biddle Earth Resistance Tester, Null Meter ........................................................................S4.2
Ground Resistance Tester, Direct Reading, Megger ...........................................................S4.3
Brass Gaging Station Tablet.............................................................................................S5.2
Brass Flood Mark Tablet ..................................................................................................S5.2
Plastic Flood Mark Indicator (Green).................................................................................S5.3
Plastic Flood Mark Indicator (White) .................................................................................S5.3
Long Shackle Padlock......................................................................................................S6.2
High Security Padlock......................................................................................................S6.2
Danger, Government Property, Keep Off ..........................................................................S7.2
Stream Gaging Station.....................................................................................................S7.2
Crest Stage Gaging Station ..............................................................................................S7.3
Observation Well.............................................................................................................S7.3
US Geological Survey, Magnetic Backing ...........................................................................S7.4
Water Quality Monitoring Station......................................................................................S7.4
Danger, No Climbing .......................................................................................................S7.5
USGS Identifier With Magnetic Backing.............................................................................S7.5
USGS Gerbermask Stencil ................................................................................................S7.5
Water Survey Crew Sign And Stand Kit .............................................................................S7.6
Water Survey Crew Replacement Sign ..............................................................................S7.6
Battery Use Record Labels ...............................................................................................S7.7
Blade-Type Ice Chisel ......................................................................................................S8.2
Safety Straps ..................................................................................................................S9.2
Altimeter/Barometer...................................................................................................... S10.2
Section S

S1 Thermometers Digital,
Hand-held
S1.1
Thermometers Rain Gage
Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories

Thermometers
Rain Gage
Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories
DIGITAL HAND-HELD
THERMOMETER
(LIQUIDS ONLY)
1501010
Hand-held, digital thermometer designed for the measurement of liquids. Lightweight
(2.5 ounces) and powered by three 1.4-volt button batteries (included), the
thermometer has a measurement range of –40 to 120 degrees Celsius with an
accuracy of +/- 0.2 degree. The stainless steel probe is attached to the plastic body of
the thermometer by a 39-inch cable. The overall length of the cable and probe is 45.5
inches. A large LCD displays the temperature readings.
DIGITAL HAND-HELD
THERMOMETER
(GENERAL PURPOSE)
1501030
NOTE: THE PROBE HANDLE AND CABLE ARE NOT WATERPROOF. DO NOT IMMERSE IN
LIQUID.
Lightweight digital thermometer for general-purpose temperature measurement. The
thermometer comes with a triple purpose stainless steel thermistor probe (with 4-foot
cable) for liquids, semi-solids, or air/gas. The unit offers switch-selectable temperature
ranges: -40 to 150 degrees Celsius and -40 to 300 degrees Fahrenheit. Accuracy is +/-
0.2 degrees Celsius and +/- 0.4 degrees Fahrenheit with a resolution of 0.1 degree
Celsius or Fahrenheit. A certificate of calibration is provided to indicate instrument
traceability to NIST standards. Power is provided by a 9-volt replaceable alkaline
battery (not included).
The case measures 3-1/2 by 1-1/4 by 5-1/2 inches and constructed of high impact,
chemical resistant ABS plastic. The splashproof design features membrane keys. A
backlight is provided for reading display in dark conditions.
S1.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

S2 Rain Gage Tipping Bucket
S2.1
Thermometers Rain Gage Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories

Thermometers
Rain Gage
Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories
TIPPING-BUCKET RAIN
GAGE
7014010
The all-metal Tipping-Bucket Rain Gage contains an 8-inch orifice with a debris-filtering
screen. Rain is funneled into one of two stainless steel tipping buckets positioned
under the funnel. The tipping buckets are calibrated to tip at 0.01 inch and can
accurately record up to 36 inches of rain per hour. After rainfall is measured, it is
emptied into drain tubes and drains through holes in the base. All holes in the base
are covered by screens to prevent insects from entering the equipment. Adjustable
legs and a level indicator built into the base aid installation. A 6-foot long, 2-conductor
cable is included with each rain gage.
FYI: Save time and money on repairs for this item: Return to the HIF.
S2.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

S3 Sampler (ISCO)
S3.1
Thermometers
Rain Gage
Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories

Thermometers
Rain Gage
Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories
ISCO MODEL 3700
SAMPLER
7042551
Portable, programmable liquid sampler consisting of a sample distributor, controller,
and cover. Controller may be programmed to collect a variety of different samples.
(See stock numbers 7042555, 7042556, 7042557, and 7042558 for the appropriate
sampler base and sample bottles to fit your application.) Sampler shipped with a 6-ft
battery cable.
BASE ASSEMBLY WITH
350 ML GLASS BOTTLES
7042555
Base assembly for ISCO 3700 sampler with twenty-four 350-mL glass bottles. Shipped
with insert carrier, caps, and retaining rings for bottles.
S3.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

BASE ASSEMBLY WITH
1-LITER GLASS BOTTLES
7042556
Base assembly for ISCO 3700 sampler with twelve 1-liter glass bottles. Shipped with
insert carrier, caps, and retaining rings for bottles.
BASE ASSEMBLY WITH
1-LITER
POLYPROPYLENE
BOTTLES
7042557
Base assembly for ISCO 3700 sampler with twenty-four 1-liter polypropylene bottles.
Shipped with insert carrier, caps, and retaining rings for bottles.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 S3.3
Thermometers
Rain Gage
Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories

Thermometers
Rain Gage
Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories
BASE ASSEMBLY WITH
1-GALLON GLASS
CONTAINERS
7042558
Base assembly for ISCO 3700 sampler with four 1-gallon glass bottles. Shipped with
insert carrier, caps, and retaining rings for bottles.
WEIGHTED STRAINER
7042559
Weighted strainer with protective plastic sleeve for ISCO 3700 sampler. Tubing (Stock
No. 7042560) must be ordered separately.
S3.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

TYGON TUBING
7042560
Tygon tubing, 3/8-inch ID, 5/8-inch OD, for use with ISCO 3700 sampler. The
customer must specify length. HIF will install connector and strainer (Stock No.
7042559) onto hose when ordered.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 S3.5
Thermometers
Rain Gage
Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories

Thermometers
Rain Gage
Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories
Helpful
Ideas and
Facts
Another Benefit of HIF Customer Support
Did you know?
To access One-Stop Shopping, all you need is a
valid USGS userid
S3.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

S4 Electric Ground Testing
Equipment
S4.1
Thermometers
Rain Gage
Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories

Thermometers
Rain Gage
Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories
BIDDLE EARTH
RESISTANCE TESTER,
NULL METER
7080001
Biddle Earth Resistance Tester, Null Meter, with 2 probes and 3 cables (red, blue, and
yellow), in carrying case.
A Megger Earth Null Balance Tester measures the resistance of ground connections to
earth, thereby helping to determine the effectiveness and integrity of such grounding
systems. The Earth Tester can also be used to measure soil resistivity as used for
geophysical prospecting, pipeline corrosion studies, and determining optimum locations
for earth electrodes.
An ac test current, generated by the instrument, is passed between the ground under
test and a current electrode (or reference ground). This potential drop to a separate
electrode (or reference ground) is applied to a bridge circuit and nulled with a threedecade
variable resistance. At balance, ground resistance in ohms is read instantly
from the digital decade switches. This null balance method means that at balance no
current flows through the potential electrodes, and therefore, their resistance does not
affect the reading.
S4.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

GROUND RESISTANCE
TESTER, DIRECT
READING, MEGGER
7080002
Ground Resistance Tester, Direct Reading, Megger, with 2 probes, 3 cables (red,
yellow, and blue), and 1 calibrator, in carrying case.
The Megger Direct-Reading Ground Tester features three terminal operation for fall-ofpotential
earth resistance measurements or it can be used for two-terminal tests to a
ground reference. Operation is simple. After probes and connecting leads are installed,
push the selector switch to the left and read earth resistance of the ground under test.
If a check of probe resistance and test lead continuity is desired, push the selector
switch to the right and use the probe resistance subscale. The direct reading 3-1/4inch
log-type scale provides good resolution over the entire 0.5 to 500-ohm range.
Range changing, multipliers, or calibrating adjustments are not necessary. A separate
pushbutton is provided for a battery check.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 S4.3
Thermometers
Rain Gage
Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories

Thermometers
Rain Gage
Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories
Helpful,
Informative
Features
Another Benefit of HIF Customer Support
Did you know?
One-Stop Shopping has the capability to search by
word, description, or part number
S4.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

S5 Gaging Station Accessories
S5.1
Thermometers Rain Gage
Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories

Thermometers
Rain Gage
Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories
Tablet measures 3-5/8 inches in diameter.
Tablet measures 3-5/8 inches in diameter.
BRASS GAGING
STATION TABLET
7101005
BRASS FLOOD MARK
TABLET
7101006
S5.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

PLASTIC FLOOD MARK
INDICATOR (GREEN)
7101007
Durable, high strength, green plastic flood mark indicator, 1-1/2-inches in diameter,
packaged 20 to a bag.
PLASTIC FLOOD MARK
INDICATOR (WHITE)
7101009
Durable, high strength, white plastic flood mark indicator, 1-1/2 inches in diameter,
packaged 20 to a bag.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 S5.3
Thermometers Rain Gage
Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories

Thermometers
Rain Gage
Samplers
(ISCO)
Elec. Ground
Testing Equip.
Gaging Station
Accessories
Helpful!
Inclusive!
Friendly!
Another Benefit of HIF Customer Support
ONE STOP DOES IT ALL!
One-Stop Shopping offers the ability to purchase or rent
from 5 sources: HIF, FISP, NWQL, OCALA (QWSU),
and Reston Self-Service Supply Center
S5.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

S6 Padlocks
S6.1
Padlocks
Signs, Stencils, and
Decals
Ice Chisels
Personal Safety
Equipment
Altimeter &
Barometer

Padlocks
Signs, Stencils,
and Decals
Ice Chisels
Personal Safety
Equipment
Altimeter &
Barometer
LONG SHACKLE
PADLOCK
7102001
1-3/4-inch brass padlock with 5/16-inch shackle 2 inches long. A 9-inch chain is
attached to the shackle so that lock may be attached to the gage house. Each lock is
shipped with two keys keyed to fit standard Survey locks.
HIGH SECURITY
PADLOCK
7102002
2-inch high security padlock contains a corrosion-resistant solid steel body. Casehardened
3/8-inch steel shackle is 1-1/8-inches long. Each lock is shipped with two
keys keyed to fit standard Survey locks.
S6.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

S7 Signs, Stencils, and Decals
S7.1
Padlocks
Signs, Stencils, and
Decals
Ice Chisels
Personal Safety
Equipment
Altimeter &
Barometer

Padlocks
Signs, Stencils,
and Decals
Ice Chisels
Personal Safety
Equipment
Altimeter &
Barometer
DANGER, GOVERNMENT
PROPERTY, KEEP OFF
7103001
This 8-inch by 12-inch sign contains black letters on a white background and a red and
white DANGER symbol. The sign is vinyl coated to make it weather and sunlight
resistant and contains an adhesive backing for permanent installation.
STREAM GAGING
STATION
7103002
This 9-1/4-inch by 13-3/8-inch sign contains black letters on a white background. The
sign is vinyl coated to make it weather and sunlight resistant and contains an adhesive
backing for permanent installation.
S7.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

CREST STAGE
GAGING STATION
7103003
This 4-1/8-inch by 6-1/2-inch sign contains black letters on a white background. The
sign is vinyl coated to make it weather and sunlight resistant and contains an adhesive
backing for permanent installation.
OBSERVATION
WELL
7103004
This 8-1/2-inch by 11-inch sign contains black letters on a white background. The sign
is vinyl coated to make it weather and sunlight resistant and contains an adhesive
backing for permanent installation.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 S7.3
Padlocks
Signs, Stencils, and
Decals
Ice Chisels
Personal Safety
Equipment
Altimeter &
Barometer

Padlocks
Signs, Stencils,
and Decals
Ice Chisels
Personal Safety
Equipment
Altimeter &
Barometer
US GEOLOGICAL
SURVEY, MAGNETIC
BACKING
7103005
This 12-inch sign contains red, blue, and gold on a white background. The sign is vinyl
coated to make it weather and sunlight resistant and contains a magnetic backing to
adhere to metal surfaces.
WATER QUALITY
MONITORING
STATION
7103006
This 4-inch by 6-inch sign contains black letters on a white background. The sign is
vinyl coated to make it weather and sunlight resistant and contains an adhesive
backing for permanent installation.
S7.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

DANGER, NO
CLIMBING
7103008
This 8-1/2-inch by 11-inch sign contains black letters on a white background, a red and
white DANGER symbol, and the international symbol for NO CLIMBING in red and
black. It is vinyl coated to make it weather and sunlight resistant and contains an
adhesive backing for permanent installation.
USGS IDENTIFIER
WITH MAGNETIC
BACKING
USGS identifier contains white letters on a green background and a magnetic backing
to adhere to metal surfaces.
Image size Stock Number
10 inches by 24 inches 7103010
7 inches by 17 inches 7103015
USGS GERBERMASK STENCIL
For one time use only. Gerbermask stencil is adhesive on back and applied to a clean
dry surface. Top protective cover is peeled away and image is ready for painting.
Several light coats of forest green krylon spray paint are suggested. When dry, peel
away stencil and discard.
Image size Stock Number
5 inches high by 13-1/2 inches long 7103020
6 inches high by 16 inches long 7103021
8 inches high by 22 inches long 7103022
10 inches high by 25 inches long 7103023
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 S7.5
Padlocks
Signs, Stencils, and
Decals
Ice Chisels
Personal Safety
Equipment
Altimeter &
Barometer

Padlocks
Signs, Stencils,
and Decals
Ice Chisels
Personal Safety
Equipment
Altimeter &
Barometer
WATER SURVEY CREW
SIGN AND STAND KIT
7103050
48-inch international orange reflective highway safety sign with WATER SURVEY CREW
and the USGS visual identifier imprinted. The sign may be detached from the
crossbracing and the base and rolled up for storage. The base, crossbracing, and
nylon storage bag for sign are included. Base contains a spring-loaded pin that locks
the sign in place and a kick release system to lower the 51-inch telescoping legs. Sign
and base are designed to remain upright in winds greater than 60 miles per hour.
WATER SURVEY CREW
REPLACEMENT SIGN
7103052
The USGS highway safety sign is a 48-inch by 48-inch diamond shape composed of
heavy-duty reflective vinyl in international orange. The USGS visual identifier and the
words, "WATER SURVEY CREW" are on the sign.
This is a replacement sign for stock number 7103050.
S7.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

BATTERY USE RECORD
LABELS
7105001
Battery labels fit directly on the sides of Power Sonic 8-Ah, 26-Ah, and 60-Ah batteries.
The battery label provides a place to record important dates and voltages for receipt,
charging, installation, and removal. Battery labels can be used on batteries in cyclic or
float applications.
The labels measure 3-5/8 by 4-1/8 inches, are laminated and have adhesive backing.
Item includes six labels per sheet.
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 S7.7
Padlocks
Signs, Stencils, and
Decals
Ice Chisels
Personal Safety
Equipment
Altimeter &
Barometer

Padlocks
Signs, Stencils,
and Decals
Ice Chisels
Personal Safety
Equipment
Altimeter &
Barometer
Helpful
Ideas and
Facts
Another Benefit of HIF Customer Support
Did you know?
Three ways to order from the HIF:
1. Call HIF; 2. Order through One-Stop;
3. Order through HIF-CSSII
S7.8 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

S8 Ice Chisels
S8.1
Padlocks
Signs, Stencils, and
Decals
Ice Chisels
Personal Safety
Equipment
Altimeter &
Barometer

Padlocks
Signs, Stencils,
and Decals
Ice Chisels
Personal Safety
Equipment
Altimeter &
Barometer
BLADE-TYPE
ICE CHISEL
7302002
Ice chisel has a steel blade 10.5 inches long by 3 inches wide welded to a 1-inch steel
handle with a ring top. It has an overall length of 54 inches and weighs approximately
14 pounds. The mild steel blade may be sharpened with a bench grinder or touched up
in the field with a file.
S8.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

S9 Personal Safety Equipment
S9.1
Padlocks
Signs, Stencils, and
Decals
Ice Chisels
Personal Safety
Equipment
Altimeter &
Barometer

Padlocks
Signs, Stencils,
and Decals
Ice Chisels
Personal Safety
Equipment
Altimeter &
Barometer
SAFETY STRAPS
7405001
Safety straps for eyeglasses or goggles. Straps feature a sliding bead to keep glasses
close and convenient. Latex grips fit securely over eyeglass temples.
S9.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

S10 Altimeter and Barometer
S10.1
Padlocks
Signs, Stencils, and
Decals
Ice Chisels
Personal Safety
Equipment
Altimeter &
Barometer

Padlocks
Signs, Stencils,
and Decals
Ice Chisels
Personal Safety
Equipment
Altimeter &
Barometer
ALTIMETER/
BAROMETER
7701001
The altimeter/barometer measures altitude up to 6,000 meters and barometric
pressure between 790 and 553 millimeters of mercury. It is temperature compensated
to operate efficiently from –20 to 40 degrees centigrade. Accuracy of altitude
measurements is +/- 10 meters. The unit is 2.5 inches by 2.7 inches by 0.8 inches,
weighs 3.2 ounces and comes with leather carrying case, lanyard, a holder that may be
placed on a desk or a wall, and an instruction manual.
S10.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

T System Diagrams
• T1 System Diagrams
Section T
System Diagrams

System Diagrams
Section T
SECTION CONTENTS
8210 DCP System ........................................................................................................... T1.2
8400 Digital Data Recorder System .................................................................................. T1.3
Accubar Pressure Sensor System ..................................................................................... T1.4
BDR-301 Data Collection System...................................................................................... T1.5
Boat Outfit Measuring System.......................................................................................... T1.6
Bridge Board Measuring System....................................................................................... T1.7
Bridge Crane Measuring System....................................................................................... T1.8
Cablecar Measuring System ............................................................................................. T1.9
H-350 LITE Pressure Sensor System ...............................................................................T1.10
PS-2 Pressure Sensor System .........................................................................................T1.11
Typical Float-Driven System ...........................................................................................T1.12
Wading Rod Measuring System.......................................................................................T1.13

T1 System Diagrams
T1.1
System Diagrams

System Diagrams
T1.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 T1.3
System Diagrams

System Diagrams
T1.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 T1.5
System Diagrams

System Diagrams
T1.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 T1.7
System Diagrams

System Diagrams
T1.8 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 T1.9
System Diagrams

System Diagrams
T1.10 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 T1.11
System Diagrams

System Diagrams
T1.12 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 T1.13
System Diagrams

System Diagrams
Here’s another
Important
Fact
Another Benefit of the HIF Rental Program
COMPONENT LIST
If a component list is included with a piece of rental
equipment, customer must return all components
so that they will not be charged for them.
T1.14 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

U Publications
• U1 Manuals and Reports
• U2 Technical Information Sheets
• U3 Miscellaneous
Section U
Top Setting Wading Rod
Publications

Publications
Section U
Manuals and Reports
Regulator....................................... U1.2
12-Volt Power System ..................... U1.2
Geostationary Operational
Environmental Satellite ................ U1.2
Installation of Electrical Power Service. U1.2
Streamflow Data at River-Control
Structures................................. U1.2
Flowmeter (Accusonic) .................... U1.2
Flowmeter (AFFRA) ........................ U1.2
Current Meter................................. U1.2
PS-2 Pressure Sensor....................... U1.2
Stage Measuring Device with SDI-12 .. U1.2
DAA H-350 Lite............................... U1.2
DAA H-310 Pressure Transducer........ U1.3
DAA H-350 Pressure Measurement
System.................................... U1.3
Current Meter Digitizer ..................... U1.3
BDR 320 ........................................ U1.3
CR-10 ............................................ U1.3
SDI Incremental Interface................. U1.3
Regulator Charger II......................... U1.3
Minimonitor (Punched-Paper Tape) .... U1.3
Minimonitor (Analog Voltage) ............ U1.3
Remote Computer Systems............... U1.3
Data Recorder................................. U1.3
ORE 7510 ...................................... U1.3
Pressure Transducer and Logger........ U1.4
DMX Manual.................................... U1.4
Data Logger ................................... U1.4
Peripheral Interface ......................... U1.4
Storage Module............................... U1.4
Encoder Interface ........................... U1.4
RS-232 Interface............................. U1.4
Shaft Encoders (436A)..................... U1.4
Shaft Encoders (436B)..................... U1.4
Smart Sensor Interface .................... U1.4
Converter Assembly ......................... U1.5
Basic Data Recorder......................... U1.5
CR10X ........................................... U1.5
Handheld Meter .............................. U1.5
Data Acquisition System ................... U1.5
555A Data Logger and DCP............... U1.5
555A Data Logger and DCP (CD) ....... U1.5
Voice Modem.................................. U1.5
Cadweld Electrical Connections.......... U1.5
Earth Resistance Testing .................. U1.5
Smart Gas System ........................... U1.5
GS-93A Water Level Monitoring
System..................................... U1.6
GS-93B Water Level Monitoring
System..................................... U1.6
SECTION CONTENTS
8400 Data Recorder......................... U1.6
H-510 Data Logger.......................... U1.6
Hydrolab H2O ................................. U1.6
Hydrolab Reporter ........................... U1.6
Surveyor 4 ..................................... U1.6
DS4/Minisonde ................................ U1.6
DS3............................................... U1.6
Water Qualit y Monitoring Systems ..... U1.6
3700 Sampler ................................. U1.6
8210 Data Recorder......................... U1.6
Technical Information Sheets
Electrical Surge Arrester ................... U2.2
Ultrasonic Velocity Meter .................. U2.2
Optic-Head Meters........................... U2.2
Electric Tape Gage .......................... U2.2
Wire-Weight Gage........................... U2.2
Static Tube .................................... U2.2
PS-2 Pressure Sensor....................... U2.2
CMD Adapter.................................. U2.2
Sounding Reel................................. U2.2
B-Connector................................... U2.2
CR10 ............................................. U2.2
Model 301 Basic Data Recorder.......... U2.2
Universal Junction Box...................... U2.3
Minimonitor pH Combination
Electrode .................................. U2.3
Shaft Encoders ............................... U2.3
Tag-Line Reel.................................. U2.3
B-56 Reel Brake Adjustment.............. U2.3
BDR301 Direct Programming.............. U2.3
Basic Earth Grounding System ........... U2.3
Tail-Fin Assembly ............................. U2.3
A-55 Reel Drag Brake ....................... U2.3
Sounding Reel Cable ........................ U2.3
Boat Tagline Gripper/Cutter .............. U2.3
Cable Brake .................................... U2.3
Standup Cable Car ........................... U2.4
Basic Data Recorder......................... U2.4
Model 301 Cables ............................ U2.4
Model 80 Cables.............................. U2.4
Calibration Stand ............................. U2.4
Miscellaneous
Calendar......................................... U3.2
Earth Resistance Test Record ............ U3.2
Rating Table (AA Current Meter) ....... U3.2
Rating Table (Pygmy Current Meter) .. U3.2
Standard Rating Table
(OAA Current Meter) .................. U3.2
Argonaut Software .......................... U3.2

U1 Manuals and Reports
U1.1
Manuals and Reports Technical Information Sheets Miscellaneous

Manuals and Reports
Technical Information Sheets
Miscellaneous
Stock Number Subject/Title
0000602 Regulator Operating Manual for the USGS Regulator, HIF
Operating Manual 7-84-04
0000701 12-Volt Power System Operating Manual for the Rechargeable
12-Volt Power System: Implementation Guide, HIF
Operating Manual 7-83-01
0000805 Geostationary Operational Environmental Satellite
Operating Manual for the U.S. Geological Survey’s Data-
Collection System with the Geostationary Operational
Environmental Satellite, OFR 91-99
0001001 Installation of Electrical Power Service Operating Manual
for the Installation of Electrical Power Service, Implementation
Guide, HIF Operating Manual 7-84-02
0001010 Streamflow Data at River-Control Structures
Instrumentation for Measuring and Recording Streamflow Data
at River-Control Structures, OFR 83-872
0001111 Flowmeter—Accusonic Model 7300 Flowmeter Operator’s
Manual
0001112 Flowmeter Manual and Software for AFFRA Acoustic
Flowmeter
0001113 Current Meter Manual for Sontek Acoustic Doppler Current
Meter
0001212 PS-2 Pressure Sensor PS-2 Pressure Sensor Operator’s
Manual
0001214 Stage Measuring Device with SDI-12—Sutron Accubar
Pressure Sensor Stage Measuring Device with SDI-12
Operator’s Manual
0001215 DAA H-350 Lite—DAA H-350 Lite Operating Manual
U1.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Stock Number Subject/Title
0001216 DAA H-310 Pressure Transducer—DAA H-310 Pressure
Transducer Operating Manual
0001221 DAA H-350 Pressure Measurement System—H-350 DAA
Pressure Measurement System Operating Manual
0003202 Current Meter Digitizer—Current Meter Digitizer (Software
Version 1.2), HIF Operating Manual 6-84-03
0005202 BDR 320—BDR 320 Operator’s Manual
0005203 CR-10—CR-10 Operator’s Manual, Campbell Scientific, Inc.,
November 1992
0005206 SDI Incremental Interface—SDI Incremental Interface
(LID) Operating Manual
0005305 Regulator Charger II—Manual for USGS Regulator Charger II
0006102 Minimonitor—USGS Minimonitor Operating Manual, 1988
Revised Edition, Punched-Paper-Tape Model, OFR 88-491
0006103 Minimonitor—USGS Minimonitor Operating Manual, 1988
Revised Edition, Analog-Voltage Model, OFR 89-403
0008103 Remote Computer Systems —The 3400 Series Remote
Computer Systems Introduction, Synergetic International, Inc.,
May 1987
0008105 Data Recorder—Sutron 8200 Data Recorder Operations
Manual (With Software)
0011115 ORE 7510—ORE 7510 Manual and Software
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 U1.3
Manuals and Reports Technical Information Sheets
Miscellaneous

Manuals and Reports
Technical Information Sheets
Miscellaneous
Stock Number Subject/Title
0012155 Pressure Transducer and Logger—Manual and Software for
DH-21 Submersible Pressure Transducer and Logger
0032025 DMX Manual—Manual for Discharge Measurement Expert
(DMX)
0051071 Data Logger—ESC Model 80 Data Logger Instruction Manual,
Software Version BDR80, Version 2, Environmental Systems
Corporation, May 1991
0052060 Peripheral Interface—SC532 Peripheral Interface Instruction
Manual
0052061 Storage Module—SM192/716 Storage Module Instruction
Manual, Campbell Scientific, Inc., February 1989
0052062 Encoder Interface—QD1 Incremental Encoder Interface,
Operator’s Manual, Campbell Scientific, Inc., April 1989
0052063 RS-232 Interface—SC32A Optically Isolated RS-232 Interface
Operator’s Manual, Campbell Scientific, Inc., April 1987
0052070 Shaft Encoders—Handar Model 436A Series Incremental Shaft
Encoders, User’s Guide, Handar, November 1990
0052071 Shaft Encoders—Handar Model 436B Series Smart
Incremental Shaft Encoders, User’s Guide, Handar, November
1990
0052072 Smart Sensor Interface—Handar Smart Sensor Interface,
User’s Guide, Handar, May 1991
U1.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Stock Number Subject/Title
0052073 Converter Assembly—Handar 12-Bit Analog-Digital Converter
Assembly 570-7020, User’s Guide, Handar, October 1989
0052086 Basic Data Recorder—BDR 301 Basic Data Recorder
Operator’s Manual, Campbell Scientific, Inc., January 1991
0052310 CR10X—CR10X Operator’s Manual, Campbell Scientific
0061041 Handheld Meter—Manual for YSI Model 85 Handheld Meter
0081020 Data Acquisition System—570A Data Acquisition System,
Operating and Service Manual, Handar, March 1988
0081050 555A Data Logger and Data Collection Platform—555A
Data Logger and Data Collection Platform Operator’s Manual
0081051 555A Data Logger and Data Collection Platform (CD)—
Compact Disc version, 555A Data Logger and Data Collection
Platform Operator’s Manual
0081053 Voice Modem—Model 555 Voice Modem with Modem
Assembly Operator’s Manual
0081061 Cadweld Electrical Connections—Publication A-7D
“Installer’s and Inspector’s Guide for Cadweld Electrical
Connections”
0081062 Earth Resistance Testing—Publication 25-T-A “Getting Down
to Earth. A Manual on Earth Resistance Testing”
0121315 Smart Gas System—User’s Manual for the H-355 Smart Gas
System
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 U1.5
Manuals and Reports Technical Information Sheets
Miscellaneous

Manuals and Reports
Technical Information Sheets
Miscellaneous
Stock Number Subject/Title
0520901 GS-93A Water Level Monitoring System—GS-93A Water
Level Monitoring System (with Internal Encoder) (ADR-type
Enclosure Version) Operating Manual
0520902 GS-93B Water Level Monitoring System—GS-93B Water
Level Monitoring System (with External Encoder) (Chart
Recorder Version) Operating Manual
0520905 8400 Data Recorder—Sutron 8400 Data Recorder Operating
Manual w/Software
0520925 H-510 Data Logger—H-510 Data Logger Operations Manual
0610300 Hydrolab H2O—Hydrolab H2O Operating Manual
0610306 Hydrolab Reporter—Hydrolab Reporter w/SDI-12 Operator’s
Manual
0610307 Surveyor 4—Surveyor 4 User’s Manual, Hydrolab
0610308 DS4/Minisonde—DS4/Minisonde User’s Manual, Hydrolab
0610360 DS3—Hydrolab DS3 Operating Manual
0610400 Water Quality Monitoring Systems —YSI 6-Series
Operations Manual for Water Quality Monitoring Systems
0742551 3700 Sampler—ISCO 3700 Sampler User’s Manual
0810500 8210 Data Recorder—8210 Data Recorder Operating Manual
(with Software), Sutron
U1.6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

U2 Technical Information Sheets
U2.1
Manuals and Reports
Technical Information Sheets Miscellaneous

Manuals and Reports
Technical Information Sheets
Miscellaneous
Stock Number Subject/Title
0001002 Electrical Surge Arrester—Electrical Surge Arrester Technical
Information Sheet for Installation
0001029 Ultrasonic Velocity Meter—Accusonic Ultrasonic Velocity
Meter Model 7300 Technical Information Sheet
0001107 Optic-Head Meters—Optic-Head Meters Care and Maintenance
Technical Information Sheet
0001203 Electric Tape Gage—Electric Tape Gage Installation Technical
Information Sheet
0001204 Wire-Weight Gage—Wire-Weight Gage Reading Instructions
Technical Information Sheet
0001209 Static Tube—Standard Orifice Static Tube Technical Information
Sheet
0001213 PS-2 Pressure Sensor—PS-2 Pressure Sensor Technical
Information Sheet
0002101 CMD Adapter—CMD Adapter Installation and Use Technical
Information Sheet
0002302 Sounding Reel—USGS Sounding Reel Servicing Technical
Information Sheet
0002308 B-Connector—B-Connector Brass Bushing Retrofit Kit
Technical Information Sheet
0005204 CR10—CR10 with SDI-12 Technical Information Sheet
0005208 Model 301 Basic Data Recorder—Model 301 Basic Data
Recorder Technical Information Sheet
U2.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Stock Number Subject/Title
0005210 Universal Junction Box—Universal Junction Box Technical
Information Sheet
0006100 Minimonitor pH Combination Electrode—Minimonitor pH
Combination Electrode (ISI Model 11) Care and Handling
Technical Information Sheet
0008102 Shaft Encoders—Handar Shaft Encoder Models 436A, 436B
Technical Information Sheet
0013010 Tag-Line Reel—Wading Tag-Line Reel Technical Information
Sheet
0023030 B-56 Reel Brake Adjustment—B-56 Reel Brake Adjustment
Technical Information Sheet
0052080 BDR301 Direct Programming—BDR301 Direct Programming
(7H) Prompt Sheet, Campbell Scientific, Inc., May 1991
0081060 Basic Earth Grounding System⎯Technical Information
Sheet for Installing a Basic Earth Grounding System For Gaging
Stations
0110706 Tail-Fin Assembly—Use of Model II AA Tail-Fin Assembly
Technical Information Sheet
0230218 A-55 Reel Drag Brake—A-55 Reel Drag Brake Technical
Information Sheet
0230275 Sounding Reel Cable—Breakaway Sounding Reel Cable
Installation Technical Information Sheet
0240118 Boat Tagline Gripper/Cutter—Technical Information Sheet
for the Boat Tagline Gripper/Cutter
0260012 Cable Brake—Sandpoint Type Cable Brake, February 1996
Technical Information Sheet
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 U2.3
Manuals and Reports Technical Information Sheets
Miscellaneous

Manuals and Reports
Technical Information Sheets
Miscellaneous
Stock Number Subject/Title
0260103 Standup Cable Car—Technical Information Sheet for Standup
Cable Car Retrofit Kit
0520802 Basic Data Recorder—Environmental Systems Corporation
Model 80 Basic Data Recorder Technical Information Sheet
0520804 Model 301 Cables—Model 301 Cables Technical Information
Sheet, Campbell Scientific
0520843 Model 80 Cables—Technical Information Sheet Model 80
Cables, Environment Systems Corporation
0610332 Calibration Stand—Aluminum Calibration Stand Technical
Information Sheet
U2.4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

U3 Miscellaneous
U3.1
Manuals and Reports Technical Information Sheets Miscellaneous

Manuals and Reports
Technical Information Sheets
Miscellaneous
Stock Number Subject/Title
0000100 Calendar—Calendar, Gage House, 2000-2001, 8-1/2 by 11
inches, double-sided, green printing on white. Displays both
Julian and calendar dates, pay periods, and holidays.
0007080 Earth Resistance Test Record—Earth Resistance Test
Record For Use With Megger Earth Testers? All Ranges
0011011 Rating Table (AA Curent Meter)—Rating Table #2 for Type-
AA Current Meter (Laminated)
0011031 Rating Table (Pygmy Current Meter)—Rating Table #2 for
Pygmy Current Meter (Laminated)
0011071 Standard Rating Table (OAA Current Meter)—Standard
Rating Table for Type OAA Current Meter (Laminated)
0113050 Argonaut Software—Argonaut Software Version 4.1 for
Sontek Acoustic Doppler Current Meter
U3.2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

SUBJECT INDEX
A
A-55 Reel, Brass Sheave for
0.10-in Cable ....................................... F2.3
A-55 Reel, Brush Holder Assembly ................ F2.5
A-55 Reel, Cable Replacement Kit
with Connector..................................... F2.6
A-55 Reel, Collector Ring............................. F2.3
A-55 Reel, Crank Arm Replacement ............... F2.4
A-55 Reel, Drag Brake ................................ F2.7
A-55 Reel, Insulator................................... F2.4
A-55 Reel, Ratchet..................................... F2.4
A-55 Reel, Retaining Arm Roller.................... F2.6
A-55 Reel, Retaining Spring Roller................. F2.6
A-55 Reel, Roller Assembly .......................... F2.2
A-55 Reel, Trunk ....................................... F2.7
A-55 Sounding Reel.................................... F2.2
AC Wall Charger for Current-Meter
Digitizer ...............................................J3.3
Accubar-3 (Sutron 5600-0125-3)................... C2.2
Accubar-5 (Sutron 5600-0125-5)................... C2.3
Adapter Cable .......................................... E1.7
Adapter for Attaching Current-Meter
Digitizer .............................................. E1.6
Adapter for Plastic Calibration Stand.............. P1.11
Adaptor for Type-A Crane............................H3.4
Adjustable Idler Wheel................................O2.3
ADR Paper Tapes....................................... L5.2
AFFRA Flow Meter .....................................A4.5
AFFRA Transducer.....................................A4.5
A-Frame and Attachments Drawing
Packages..............................................I3.4
Aircraft Cable, 3/32-inch Stainless Steel ......... F5.2
Altimeter/Barometer................................. S10.2
Aluminum Calibration Stand......................... P1.11
Analog Connector To Junction Box Cable........M2.8
Antenna Cable ..........................................Q2.3
Anti-Back Siphon Valve Kit .......................... R1.5
A-Pack Reel.............................................. F1.2
A-Pack Reel, Cable Replacement Kit .............. F1.3
A-Pack Reel, Sheave for 0.084-inch Cable....... F1.2
A-Pack Reel, Threading Shaft....................... F1.2
Argonaut Software.....................................U3.2
B
B-56 Reel (Standard), Brass Sheave...............F3.2
B-56 Reel .................................................F3.2
B-56 Reel, Brake Clutch Facing .....................F3.3
B-56 Reel, Brush Holder Assembly .................F3.6
B-56 Reel, Cable Replacement Kit,
0.10-in Cable ........................................F3.6
B-56 Reel, Cable Replacement Kit,
0.125-in Cable ......................................F3.5
B-56 Reel, Collector Ring .............................F3.3
B-56 Reel, Crank, with 2 Hubs......................F3.4
B-56 Reel, Crank Nut ..................................F3.4
B-56 Reel, Insulator....................................F3.3
B-56 Reel, Power Conversion Kit ...................F3.5
B-56 Reel, Sheave (Optional)........................F3.3
B-56 Reel, Threading Shaft ..........................F3.2
B-56 Reel, Trunk........................................F3.5
Bag, Teflon...............................................R2.20
Bags, Poly ................................................R2.19
Balance-Weight Assembly ........................... A1.7
Band Clamp, Screw Driven ..........................R2.10
Base Assembly with 1-Gallon Glass
Containers ...........................................S3.4
Base Assembly with 1-Liter Glass Bottles.........S3.3
Base Assembly with 1-Liter Polypropylene
Bottles................................................S3.3
Base Assembly with 350 mL Glass Bottles.......S3.2
Base for Sectional Wading Rod .....................E2.3
Base Stud 3/8-16 for A-55, B-56, & E-53
Reels ..................................................F2.5
Base ........................................................E1.3
Base, Three-Wheel.................................... H1.2
Battery Cable to Drive Motor........................F7.3
Battery Connector Cable (12-inch)................ N1.2
Battery Use Record Labels ...........................S7.7
Battery, Lithium.........................................C4.8
BDR 320 Power Cable with Connector
for Battery Cable .................................. M2.6
Bearing, Shaft .......................................... D2.4
Bearing, Upper-Bushing.............................. A2.3
Biddle Earth Resistance Tester, Null Meter ......S4.2
Binding Post Assembly ............................... A1.10
1
SUBJECT INDEX

SUBJECT INDEX
Binding Post Assembly ................................A2.4
Binding Post Assembly, Penta-Count..............A1.4
Binding Post Assembly, Single-Count .............A1.4
Blade-Type Ice Chisel................................. S8.2
Boat Outfit ...............................................G1.2
Boat Tagline Gripper/Cutter.........................G1.7
Boom Extension for Type-E Crane.................H5.2
Boom, Telescoping, without Nose Piece..........G1.2
Box, Paper Tape Storage............................. L5.3
Box, Shipping, for L&S Recorder................... L1.4
Boxes, Shipping, for F&P Recorder................ L1.3
Bracket, Crest -Stage Gage........................... B2.3
Bracket, Internal Frame (Left -Hand).............. B4.4
Bracket, Internal Frame (Right-Hand)............ B4.4
Bracket, Left End.......................................G1.4
Bracket, Mounting.......................................J3.3
Bracket, Right End .....................................G1.3
Brake Arm Assembly for E-53 Reel................ F4.5
Brake Band for Follower Brake ......................I2.4
Brake Belt .................................................I2.8
Brake Clutch Facing for B-56 Reel................. F3.3
Brake Clutch Facing for E-53 Reel................. F4.3
Brake Pads for Sandpoint Brake.....................I2.5
Brake Shoe for Follower Brake Type ...............I2.7
Brake Washer No. 1...................................D2.5
Brake Washer No. 2...................................D2.6
Brake Wing Nut .........................................D2.5
Brake ...................................................... B4.2
Brass Bushing for Type-B Connectors ............ F8.2
Brass Bushing Retrofit Kit, for Type-B
Connectors.......................................... F8.3
Brass Cable Sheave for E-53 Reel, Fits
1/8-inch Cable...................................... F4.3
Brass Cable-Car Sheave ...............................I2.2
Brass Flood Mark Tablet.............................. S5.2
Brass Gaging Station Tablet......................... S5.2
Brass Sheave for 0.10-inch Cable for
A-55 Reel............................................ F2.3
Brass Sheave for B-56 Reel (Standard)........... F3.2
Brass Sheave for E-53 Reel, Fits
0.10-inch Cable .................................... F4.2
Brass Sounding-Line Sheave .........................I2.2
Brass Weight ............................................ B3.2
Breakaway Cable Kit for 0.084 and 0.10 Cable. F2.7
Breakaway Cable Kit for 0.125 Cable ............. F2.8
Bridge Board (Footrest) Support Assembly......H6.3
Bridge Board with Support Assembly .............H6.2
Brush Holder Assembly for A -55 Reel............. F2.5
Brush Holder Assembly for B-56 Reel............. F3.6
Brush Holder Assembly for E-53 Reel............. F4.4
Brushes for Power Drive Unit ....................... F7.3
Bucket Wheel........................................... A2.6
Bucket Wheel, Metal .................................. A1.6
Bucket Wheel, Polymer............................... A3.3
Bushing, Binding Post ................................ A1.4
Bushing, Insulating.....................................E1.6
Bushing, Shaft Insulator, for Type-E Crane..... H5.3
2 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/
C
Cable Cars ................................................ I1.2
Cable Clamp.............................................. I2.9
Cable Clips................................................ I3.3
Cable Driven Float Wheels .......................... O1.2
Cable Laying Shaft for A -55 Reel...................F2.3
Cable Replacement Kit for A -Pack Reel...........F1.3
Cable Replacement Kit for B-56 Reel,
0.10-in. Cable .......................................F3.6
Cable Replacement Kit for B-56 Reel,
0.125-in. Cable .....................................F3.5
Cable Replacement Kit with Connector for
A-55 Reel.............................................F2.6
Cable Sleeving, 3-Foot .............................. F10.4
Cable, 0.045-inch, Replacement ....................B4.3
Cable, 25-Meter, without Stirrer Connector......P1.13
Cable, 3- to 9-Pin Communication................. M2.11
Cable, 9- to 25-Pin Communication............... M2.11
Cable, 9-Pin Communications ...................... M2.6
Cable, Adapter...........................................E1.7
Cable, Aircraft, 3/32-inch Stainless Steel.........F5.2
Cable, Analog Connector To Junction Box ...... M2.8
Cable, Antenna......................................... Q2.3
Cable, Battery Connector (12-inch) ............... N1.2
Cable, Battery, To Drive Motor......................F7.3
Cable, BDR 320 Power, with Connector
for Battery Cable .................................. M2.6
Cable, Calibration.......................................P2.6
Cable, Cigarette-Lighter Battery Charger......... J3.2
Cable, Communications.............................. M2.9
Cable, Communications...............................P2.10
Cable, Data, for Optic AA Meter ....................E1.7
Cable, DH-21 External Power........................C4.9
Cable, External Power Adapter......................P1.16
Cable, Field, to Computer ............................P2.9
Cable, Field, to Flying Lead Wire Adapter........P2.9
Cable, H-510 Communication....................... M2.12
Cable, Hydrolab Calibration ..........................P1.7
Cable, Hydrolab Computer Interface ..............P1.5
Cable, Junction Box to Battery..................... M2.7
Cable, Model 80 Data Logger....................... M2.10

Cable, Optic, for Current -Meter Digitizer..........J3.3
Cable, Power............................................A4.3
Cable, SDI-12 Interface .............................. P1.6
Cable, SDI-12 Junction Box..........................M2.8
Cable, SDI-12 Sensor.................................M2.9
Cable, SDI-12, RS-232 Adapter..................... P1.17
Cable, Surveyor 4 Adapter........................... P1.14
Cable, Switch Closure ..................................J3.2
Cable, Transducer, RG108 ...........................A4.2
Cable, Universal Shaft Encoder.....................M4.5
Cable, Y, for Model 301 Data Logger.............M2.7
Cable, Y, for Model 80 Data Logger...............M2.10
Cable-Car Hook ..........................................I2.8
Cable-Car Protractor....................................I2.3
Cable-Car Pullers ........................................I2.7
Cable-Laying Sheave .................................. B4.6
Cables, Ellsworth......................................F10.2
Cables, Field ............................................. P2.7
Cableway Anchor Bars .................................I3.2
Cadweld One Shot for One No. 6 AWG...........Q3.5
Cadweld One Shot for Three No. 6 AWG........Q3.4
Calendar ..................................................U3.2
Calibration Cable ....................................... P2.6
Calibration Cup ......................................... P1.7
Cap, Contact Chamber................................A1.3
Cap, Contact Chamber................................A2.4
Carbon Steel Tape.....................................D6.2
Card Reader, 8400.....................................M2.5
Carrying Case for Price AA Current Meter........A1.11
Carrying Case ...........................................A2.7
Charger, Regulator.....................................N1.2
Charger, USGS Regulator............................N1.4
Charger, Wall............................................N1.2
Check Valve, All Teflon .............................. R2.5
Checking Bar Assembly ............................... B4.5
Chisel, Blade-Type Ice ................................ S8.2
Cigarette-Lighter Battery Charger Cable ..........J3.2
Clamp Handle ...........................................G1.5
Clamp Holder............................................G1.5
Clamp Latch .............................................G1.5
Clamp Standard.........................................G1.4
Clevis for Type-B Connector......................... F8.2
Clevis Pin, Stainless Steel, 5/16-inch
Diameter............................................. F8.3
Collector Ring for A-55 Reel......................... F2.3
Collector Ring for B-56 Reel......................... F3.3
Collector Ring for E-53 Reel......................... F4.3
Columbus Tagline Reel with Tagline ..............D1.2
Columbus Weight Hanger............................ K2.2
Communication Cable, 3- to 9-Pin .................M2.11
Communications Cable, 9-Pin ...................... M2.6
Communication Cable, 9- to 25-Pin ............... M2.11
Communications Cable ............................... M2.9
Communications Cable ................................P2.10
Connector, Liquid-Tight (Grip 0.400-0.560) .....P3.2
Connector, Liquid-Tight (Grip 0.870-1.020) .....P3.3
Connector, Strain Relief (Small)................... A4.3
Connector, Strain Relief (Large).................. A4.3
Connector, Two-Conductor (Orange)............. N1.3
Connector, Two-Conductor (Red)................. N1.4
Cont act Chamber...................................... A1.3
Contact Chamber, Magnetic Head Assembly ... A1.9
Container for Repair Kit ............................. F10.8
Contax.................................................... Q3.3
Cork, Crest Gage Ground, 1 pound ................B2.3
Cotter Pin .................................................F9.2
Counter Lever............................................B4.3
Counter....................................................B4.3
Counterweight for Four-Wheel Truck............. H2.3
Cover Holding Screw.................................. D2.4
Cover...................................................... D2.3
Cover, Lucite, for Computing Type-A
Depth Indicator.....................................F6.2
CR-10 Conductivity Electrode Assembly,
Potted................................................ M3.3
CR-10 Conductivity Sensor Interface ............. M3.2
CR-10 Data Logger Environmental
Enclosure............................................ M2.2
CR-10 Data Logger.................................... M1.7
CR-10 Temperature Interface...................... M3.2
CR-10X Data Logger.................................. M1.8
Crane, Type-A .......................................... H3.2
Crane, Type-E .......................................... H5.2
Crane, Type-E, Boom Extension ................... H5.2
Crank and Brake Holder Screw..................... D2.5
Crank Arm Replacement for A -55 Reel............F2.4
Crank Assembly ........................................ D2.4
Crank for Computing Type-A Depth
Indicator..............................................F6.2
Crank for E-53 Reel....................................F4.4
Crank Handle Pin ...................................... D2.4
Crank Handle ........................................... D2.4
Crank Lock Washer.................................... D2.5
Crank Nut for B-56 Reel...............................F3.4
Crank, with 2 Hubs for B-56 Reel...................F3.4
Crest Gage Ground Cork, 1 pound.................B2.3
Crest Stage Gaging Station...........................S7.3
Crest-Stage Gage Bottom Fixture, 2-inch ........B2.2
Crest-Stage Gage Bracket ............................B2.3
Crest-Stage Gage Top Cap, 2-inch.................B2.2
Crimping Tool.......................................... F10.5
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 3
SUBJECT INDEX

SUBJECT INDEX
Crosspiece................................................G1.3
Cup, Storage ............................................ P1.8
Current-Meter Digitizer ................................J3.2
D
DAA H-350 Pressure Measurement
System (0-15 PSI)................................. C5.2
DAA H-350 Pressure Measurement
System (0-30 PSI)................................. C5.2
Danger, Government Property, Keep Off ........ S7.2
Danger, No Climbing .................................. S7.5
Data Cable for Optic AA Meter...................... E1.7
Data Cards, 8400.......................................M2.3
Data-Collection Platform (555A) with
Speech Modem.....................................Q1.8
Data Logger, 8400 (12K Reading)................M1.15
Data Logger, 8400 (50K Reading) .................M1.16
Datasonde 3 Stirrer Adapter......................... P1.5
Datasonde 3 Submersible Battery Pack
with Stirrer.......................................... P1.10
Datasonde 3 Video..................................... P1.9
Datasonde 4 Water-Quality Monitor............... P1.16
Depth Indicating Counter for A -Pack Reel....... F1.3
Desiccant Mini-Pack ................................... C4.8
Desiccant Pack for DH-21............................ C4.8
DH-21 External Power Cable ........................ C4.9
DH-21 Pressure Transducer/Data Logger........ C4.6
Diagram, 8210 DCP System.........................T1.2
Diagram, 8400 Digital Data Recorder
System...............................................T1.3
Diagram, Accubar Pressure Sensor System.....T1.4
Diagram, BDR-301 Data Collect ion System......T1.5
Diagram, Boat Outfit Measuring System.........T1.6
Diagram, Bridge Board Measuring System ......T1.7
Diagram, Bridge Crane Measuring System ......T1.8
Diagram, Cablecar Measuring System............T1.9
Diagram, H-350 LITE Pressure Sensor
System...............................................T1.10
Diagram, PS-2 Pressure Sensor System..........T1.11
Diagram, Typical Float-Driven System............T1.12
Diagram, Wading Rod Measuring System........T1.13
Digital Hand-Held Thermometer
(General Purpose)................................. S1.2
Digital Hand-Held Thermometer
(Liquids Only) ...................................... S1.2
Discharge Measurement Expert (DMXpert).......J4.2
Dissolved-Oxygen Membranes...................... P2.9
Dissolved-Oxygen Probe Service Kit............... P2.11
Doc-Soc Filtration Unit Kit ...........................R1.15
Drag Brake for A-55 Reel.............................F2.7
Drawing Packages, A-Frame and
Attachments......................................... I3.4
Drive Motor (12-Volt) for F&P Recorder..........L1.3
Drum and Index-Wheel Assembly ..................B4.5
DS3 Battery Power Pack..............................P1.4
4 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/
E
E-53 Reel Cable Replacement Kit ...................F4.5
E-53 Reel Optional Cable Replacement Kit .......F4.6
E-53 Reel .................................................F4.2
E-53 Reel, Brake Arm Assembly ....................F4.5
E-53 Reel, Brake Clutch Facing .....................F4.3
E-53 Reel, Brass Cable Sheave, Fits
1/8-in Cable .........................................F4.3
E-53 Reel, Brass Sheave, Fits 0.10-in Cable .....F4.2
E-53 Reel, Brush Holder Assembly .................F4.4
E-53 Reel, Collector Ring .............................F4.3
E-53 Reel, Crank........................................F4.4
E-53 Reel, Insulator....................................F4.3
E-53 Reel, Threading Shaft ..........................F4.2
E-53 Reel, Trunk........................................F4.4
Ear Cushion for Headphone.......................... J2.3
Earth Resistance Test Record ...................... U3.2
Electric Tape Gage .....................................B3.2
Electrical Brush for A-55, B-56, &
E-53 Reels ...........................................F2.3
Electrical Lead, Handle to Plug......................E1.5
Electrical Lead, Rod to Meter........................E1.5
Ellsworth Cables....................................... F10.2
Empty Reel.............................................. D6.4
Encoder Adapter Sleeve.............................. O1.6
Encoder, 436A (with Incremental Output)...... M4.2
Encoder, 436A/B (with Incremental
and SDI-12 Outputs)............................. M4.3
Encoder, 436B (with SDI-12 Output)............. M4.2
Encoder, 436BD (with SDI-12 Output)........... M4.4
End Hook ................................................ O1.4
End Pole for 1/2-inch Sectional
Wading Rod ........................................E2.4
Exploded View of Price AA Current Meter....... A1.2
Exploded View of Price Pygmy Current
Meter................................................. A2.2
Exploded View of Plastic Tagline Reel............ D2.2
Exploded View of Sectional Wading Rod..........E2.2
Exploded View of Top-Setting Wading Rod ......E1.2

Extension Section for 1/2-inch Diameter
Wading Rod ........................................ E2.3
External Power Adapter Cable ...................... P1.16
External Power Connector........................... P2.10
F
F&P Model 1542 Recorder with Telekit ........... L1.2
F&P Recorder Drive Motor (12-Volt) .............. L1.3
Female Telephone-Type Connector................J2.2
Ferrule Kit, 1/8-inch, Front/Back, Nylon.......... C1.4
Ferrule Kit, 1/8-inch, Front/Back, Stainless
Steel .................................................. C1.4
Field Cable to Computer.............................. P2.9
Field Cable to Flying Lead Wire Adapter......... P2.9
Field Cables.............................................. P2.7
Field Decontamination and Blanking
Cylinder ............................................. R2.20
Filter Unit ................................................ R2.13
Flaring Tool ............................................. R2.7
Flint for Cadweld One Shot ..........................Q3.6
Float Hanger.............................................O1.5
Float Tape Indicator...................................O2.2
Float Wheel Mounting Kit ............................O1.6
Float Wheel, Insulated, Tape-Driven..............O1.2
Float Wheel, Rainfall ..................................O1.4
Float Wheel, Uninsulated, Tape-Driven ..........O1.2
Float Wheels, Cable Driven..........................O1.2
Float, 1-1/2-inch Polyethylene......................O1.5
Float, 2-1/2 inch Polyethylene ......................O1.3
Floats, Plastic............................................O1.5
Floats, PVC...............................................O1.7
Flow Cell for Minisonde and DS4................... P1.20
Flow Cell for YSI 6920 ................................ P2.11
Flow Cell.................................................. P1.6
Flow Manifold Kit ...................................... R1.8
Flow Manifold-Tube To HIF Flow-Through
Chamber Kit ........................................ R1.11
Flow-Through Chamber .............................. P3.2
Fluid-Type Protractor for Types A and
E Cranes.............................................H3.2
Follower Brake Belt .....................................I2.2
Follower Brake-Type Cable-Car Puller .............I2.6
G
Galvanized Steel Tagline, Special Order..........D5.2
Galvanized Steel Thimbles............................I3.3
Garden-Hose Connection Kit ....................... R1.3
Gas Filter Refill Kit .....................................R2.16
Gas Filter Spring Clip ..................................R2.17
Gas Filter, Inline, Refillable ..........................R2.16
Gear Assembly, Penta................................ A1.4
Ground Bus Bar ........................................ Q3.5
Ground Enhancement Material (GEM) ............ Q3.3
Ground Resistance Tester, Direct
Reading, Megger...................................S4.3
Ground Rod Driving Sleeve.......................... Q3.6
Grounding Conductor No. 6 AWG................. Q3.4
Grounding Kit for Electronic Equipment.......... Q3.2
Grounding Rod ......................................... Q3.4
GS-93 Card Reader.................................... M2.4
GS-93 Data Card ....................................... M2.4
GS-93 Software Diskette and Manual ............ M2.4
GS-93A Water Level Monitoring System......... M1.13
GS-93B Water Level Monitoring System......... M1.14
Guard, Weighted Sensor..............................P1.10
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 5
H
H-310-15 Submersible Pressure
Transducer with Sediment Guard..............C4.3
H-310-15 Submersible Pressure Transducer.....C4.2
H-310-30 Submersible Pressure
Transducer with Sediment Guard..............C4.5
H-310-30 Submersible Pressure Transducer.....C4.4
H-350 Data Card, 1 MB Flash........................C5.3
H-350 Lite ................................................C3.2
H-350 Logger with H-355 Gas System............C5.2
H-355 Smart -Gas System.............................C1.2
H-510 Communication Cable ....................... M2.12
H-510 Data Logger.................................... M1.17
Hand Indicator for Computing Type-A
Depth Indicator.....................................F6.2
Handar 128K Memory Card ......................... Q1.6
Handar 550/560/570 Communication Cable.... Q1.5
Handar 555A Communication Cable .............. Q1.7
Handar 555A Data-Collection Platform........... Q1.6
Handar 570 ADR Interface Board ................. Q1.3
Handar 570 Analog-to-Digital Interface
Board................................................. Q1.3
Handar 570 Incremental Encoder Interface
Board................................................. Q1.2
Handar 570 Power, Encoder, and Tipping
Bucket Raingage Cable .......................... Q1.5
Handar 570 Smart Sensor Interface Board ..... Q1.4
Handar 570 Telephone Modem.................... Q1.4
Handar 570 to SDI-12 Sensor Cable.............. Q1.5
SUBJECT INDEX

SUBJECT INDEX
Handar 570A Data-Collection Platform ...........Q1.2
Handle for Heavy-Duty Boat Tagline Reel.......D4.2
Handle for Lee Au Tagline Reel.....................D3.3
Handle for Light -Duty Tagline Reel................D4.2
Handle with Insulator................................. E1.4
Hanger, Columbus Weight ........................... K2.2
Hanger, Heavy Weight (1-1/2 inch wide)........ K2.2
Hanger, Heavy Weight (3/4 inch wide)........... K2.2
Headphone Assembly ..................................J2.2
Heat-Shrink Tubing for 1/16-inch Kevlar
Cable..................................................D5.5
Heavy Duty Side-Cutting Pliers ....................F10.7
Heavy Weight Hanger (1-1/2 inch wide)......... K2.2
Heavy Weight Hanger (3/4 inch wide)............ K2.2
Helical GOES Antenna (Top Hat)...................Q2.2
Hex Rod .................................................. E1.7
High Security Padlock................................. S6.2
Hook-Type Terminal..................................F10.4
Hook-Up Wire for No. 12 AWG.....................Q3.5
Hose, 0.250 ID by 7/16 (1/2 inch) OD
by 11 ft .............................................. R2.15
Housing with Insert....................................D2.8
Hub Assembly with Bucket-Wheel Nut............A2.5
Hub Nut...................................................A2.6
Hub, Bucket Wheel, with Nuts......................A1.6
Hub, Plastic ..............................................O1.7
Hubspacer Flat Washer...............................D2.6
Hydrolab Auxiliary Power Cord ..................... P1.5
Hydrolab Calibration Cable........................... P1.7
Hydrolab Computer Interface Cable............... P1.5
Hydrolab Datasonde 3 Water-Quality
Monitor............................................... P1.3
Hydrolab H20 Water-Qualit y Monitor............. P1.2
Hydrolab Low-Ionic Strength Reference
pH ..................................................... P1.2
Hydrolab Maintenance Kit ............................ P1.12
Hydrolab Reporter..................................... P1.14
Hydrolab Stirrer with Sensor Guard ............... P1.3
Hydrolab Underwater Cables for
Minisonde 4 and Datasonde 4.................. P1.15
Hydrolab Underwater Cables........................ P1.4
I
Ice Foot ................................................... E3.2
Ice Meter with Polymer Bucket Wheel............A3.3
Ice Meter.................................................A3.2
Idler Wheel Kit .........................................O2.3
Idler Wheel ..............................................O2.3
Index Wheel .............................................B4.4
Indicator, Plastic Flood Mark (Green) .............S5.3
Indicator, Plastic Flood Mark (White)..............S5.3
Insertion Tool........................................... N1.4
Insulated, Tape-Driven Float Wheel.............. O1.2
Insulating Bushing......................................E1.6
Insulating Washer......................................E1.4
Insulator for A-55 Reel................................F2.4
Insulator for B-56 Reel................................F3.3
Insulator for E-53 Reel................................F4.3
Insulator for Handle....................................E1.4
Interface Board, Handar 555A ..................... Q1.9
Internal Frame Bracket (Left -Hand) ...............B4.4
Internal Frame Bracket (Right-Hand) .............B4.4
ISCO Model 3700 Sampler...........................S3.2
6 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/
J
Jackshaft .................................................L4.2
Junction Box To Battery Cable ..................... M2.7
Junction Box with Cables (for Model 301
Data Logger)....................................... M2.7
Junction Box with Cables (for Model 80
Data Logger)....................................... M2.10
Junction Box ............................................ M2.8
Junction, Teflon.........................................P1.13
Junction, Teflon, Series 4.............................P1.20
K
Kevlar Floating Boat Tagline, 0.172-inch ........ D5.5
Kevlar Tagline Cleaner and Rewaxer............. D5.4
Kevlar Wading Taglines.............................. D5.4
Keypad and Display Unit ............................. M2.5
Kleine Grip, Sliding .................................... D5.6
Kleine Grip, Sliding, with Steel Cable ............. D5.6
Knurled Nut, 1/8-inch Tube, Brass .................C1.5
Knurled Nut, 1/8-inch Tube, Stainless Steel.....C1.5
L
L&S Model 7000 Recorder with Digital
Input/Output ........................................L2.3
L&S Model 7000 Recorder with Module A
for DCP Interface ..................................L2.2

L&S Model 7000 Recorder........................... L2.2
Latch, Left Roller.......................................G1.6
Latch, Right Roller .....................................G1.6
Lead Sounding Weights .............................. K1.2
Lee Au Handline........................................D7.2
Lee Au Tagline Reel with 500 ft Tagline..........D3.2
Lee Au Tagline Reel without Tagline..............D3.2
Left End Bracket........................................G1.4
Left Roller Latch ........................................G1.6
Lever for Sliding Support Assembly,
Replacement ........................................ E2.5
Light-Duty Boat Tagline Reel........................D4.2
Lithium Battery ......................................... C4.8
Lock Assembly ..........................................D2.6
Lock Handle Assembly for E-Truck ................H4.3
Lock Handle .............................................D2.6
Lock Roll Pins, Stainless Steel.......................D2.7
Lock, Spring .............................................D2.8
Locking Nut, 1/2-inch.................................A4.4
Locking Pin...............................................D2.6
Long Shackle Padlock................................. S6.2
Low -Flow Dissolved-Oxygen Membrane.......... P1.9
Lower Section for 1/2-inch Diameter
Wading Rod ........................................ E2.3
Lower Section, for 1/2-inch Wading Rod......... E2.5
Lucite Cover for Computing Type-A
Depth Indicator.................................... F6.2
M
Maintenance Brush .................................... P2.11
Maintenance Kit for Low-Flow
Dissolved-Oxygen ................................. P1.12
Maintenance Kit for Minisonde...................... P1.18
Maintenance Kit ......................................... P2.10
Male NPT Hose Adapter ............................. R2.14
Male Pipe to Hose Barb Connector ................ R2.10
Male Plug Connector (Phone-Type) ............... E1.5
Male Telephone-Type Connector....................J2.3
Manual, 12-Volt Power System.....................U1.2
Manual, 3700 Sampler................................U1.6
Manual, 555A Data Logger and DCP (CD) .......U1.5
Manual, 555A Data Logger and DCP ..............U1.5
Manual, 8210 Data Recorder........................U1.6
Manual, 8400 Data Recorder........................U1.6
Manual, Basic Data Recorder........................U1.5
Manual, BDR 320.......................................U1.3
Manual, Cadweld Electrical Connections.........U1.5
Manual, Converter Assembly ........................U1.5
Manual, CR-10.......................................... U1.3
Manual, CR10X ......................................... U1.5
Manual, Current Meter Digitizer.................... U1.3
Manual, Current Meter............................... U1.2
Manual, DAA H-310 Pressure Transducer....... U1.3
Manual, DAA H-350 Lite ............................. U1.2
Manual, DAA H-350 Pressure Measurement
System............................................... U1.3
Manual, Data Acquisition System.................. U1.5
Manual, Data Logger.................................. U1.4
Manual, Data Recorder............................... U1.3
Manual, DMX Manual ................................. U1.4
Manual, DS3 ............................................ U1.6
Manual, DS4/Minisonde.............................. U1.6
Manual, Earth Resistance Testing................. U1.5
Manual, Encoder Interface.......................... U1.4
Manual, Flowmeter (Accusonic) ................... U1.2
Manual, Flowmeter (AFFRA) ....................... U1.2
Manual, GOES .......................................... U1.2
Manual, GS-93A Water Level Monitoring
System............................................... U1.6
Manual, GS-93B Water Level Monitoring
System............................................... U1.6
Manual, H-510 Data Logger......................... U1.6
Manual, Handheld Meter............................. U1.5
Manual, Hydrolab H2O ............................... U1.6
Manual, Hydrolab Reporter.......................... U1.6
Manual, Installation of Electrical Power
Service............................................... U1.2
Manual, Minimonitor (Analog-Voltage)........... U1.3
Manual, Minimonitor (Punched-Paper
Tape)................................................. U1.3
Manual, ORE 7510..................................... U1.3
Manual, Peripheral Interface........................ U1.4
Manual, Pressure Transducer and Logger....... U1.4
Manual, PS-2 Pressure Sensor...................... U1.2
Manual, Regulator Charger II ...................... U1.3
Manual, Regulator..................................... U1.2
Manual, Remote Computer Systems.............. U1.3
Manual, RS-232 Interface ........................... U1.4
Manual, SDI Incremental Interface............... U1.3
Manual, Shaft Encoders (436A).................... U1.4
Manual, Shaft Encoders (436B) .................... U1.4
Manual, Smart Gas System.......................... U1.5
Manual, Smart Sensor Interface ................... U1.4
Manual, Stage Measuring Device with
SDI-12 ............................................... U1.2
Manual, Storage Module ............................. U1.4
Manual, Streamflow Data at River-Control
Structures........................................... U1.2
Manual, Surveyor 4 ................................... U1.6
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 7
SUBJECT INDEX

SUBJECT INDEX
Manual, Voice Modem.................................U1.5
Manual, Water Quality Monitoring Systems .....U1.6
Maximum and Minimum Stage Indicator.........M4.3
Mechanical Stopwatch .................................J1.2
Meter...................................................... B3.2
Microswitch for F&P Recorder....................... L1.3
Minisonde 4 with Vented Level..................... P1.19
Minisonde 4.............................................. P1.17
Minisonde Weighted Sensor Guard ................ P1.18
F&P Model 1542 Recorder........................... L1.2
Model 80 Data Logger................................M1.2
Model 80 Data Logger Cable ........................M2.10
Model 80 Data Logger with Extended
Temperature Range ..............................M1.3
Model 85 Handheld Water-Quality Monitor...... P2.2
Model 301 Data Logger...............................M1.4
Model 320 Data Logger...............................M1.5
Model 320 Environmental Enclosure Kit ..........M2.2
Model 555A Data Logger.............................M1.6
Model 600 Water-Quality Monitor.................. P2.2
Model 6000 Water-Quality Monitor................ P2.5
Model 600XLM Water-Quality Monitor............ P2.4
Model 610 Display ..................................... P2.8
Model 6920 Water-Quality Monitor................ P2.5
Model 8200 Sutron Data-Collection
Platform..............................................Q1.13
Model 8200A Data Logger with Phone/Speech
Modem..............................................M1.10
Model 8200A Data Logger...........................M1.9
Model 8200A Sutron Data-Collection
Platform..............................................Q1.13
Model 8210 Data Logger (without GOES)........M1.11
Model 8210 Data Logger with
Phone/Speech Modem...........................M1.12
Model III Timer......................................... L3.2
Mooring Fixture for Minisonde...................... P1.18
Mounting Bracket .......................................J3.3
Multiparameter ADR Paper Tapes.................. L5.2
N
Nicopress Sleeve (5/8-inch)......................... B4.3
Nicopress Sleeve, 1-080D, 1-1/2 inch............F10.6
Nicopress Sleeve, 1-102D, 1-1/2 inch............F10.6
Nicopress Sleeve, 1-102D, 5/16 inch.............F10.6
Nicopress Sleeve, 1-102D, 7/8 inch..............F10.6
Nicopress Tool, 310-C................................F10.7
Nicopress Tools......................................... F2.8
Nitrate Body Adapter.................................. P1.19
Nitrogen Delivery System Kit .......................R1.16
Nose Piece (Sheave).................................. G1.3
Nubian Steel Tapes.................................... D6.3
Numeral Plates for Metric Staff Gage..............B1.4
Nut with Set Screw, Pivot............................ A1.7
Nut, Hub................................................. A1.6
Nut, Raising ............................................. A1.6
Nut, Thumb ............................................. A1.5
Nylon Bushing for Type-B Connectors.............F8.2
Nylon Tie Straps .......................................R2.9
Nylon Tubing, 500-foot Roll..........................C1.5
8 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/
O
Observation Well Sign .................................S7.3
Oil, 1 Ounce, in Dispenser Bottle .................. A1.10
Oil, 1/2 Pint, in Bottle................................. A1.11
Optic Cable for Current -Meter Digitizer ........... J3.3
Outer Sheave Shaft forType-E Crane
(for Brass Sheave)................................ H5.3
Outer Sheave Shaft for Type-E Crane
(for Polymer Sheave) ............................ H5.3
P
Padlock, High Security.................................S6.2
Padlock, Long Shackle.................................S6.2
Panel, Plastic.............................................R2.8
Paper Tape Storage Box..............................L5.3
Paper Tapes, ADR ......................................L5.2
Paper Tapes, Multiparameter ADR .................L5.2
Parafilm ..................................................R2.21
Parallel Battery Harness.............................. N1.3
Parallel Connector.................................... F10.5
Pawl, with Screw and Spring for A -55 Reel......F2.4
PC-208W Software .................................... M2.3
PCMCIA Static Ram Card, 1 Meg .................. M2.3
pH/ORP Probe ...........................................P1.19
pH/ORP Probe ...........................................P2.3
pH/ORP Probe ...........................................P2.8
Phone-Jack Plug Adapter.............................E1.6
Pigtail (24-inch)........................................ N1.3
Pigtail (6-inch).......................................... N1.3
Pipe, 1/4-inch Female to 1/8-inch
Tube with Nylon Ferrule..........................C1.6
Pivot fork for Type-A Truck ......................... H2.3
Pivot Nut with Set Screw ............................ A2.5

Pivot with Nut and Set Screw .......................A1.7
Pivot with Nut and Set Screw .......................A2.4
Plastic Calibration Stand.............................. P1.11
Plastic Floats.............................................O1.5
Plastic Flood Mark Indicator (Green).............. S5.3
Plastic Flood Mark Indicator (White).............. S5.3
Plastic Hub...............................................O1.7
Plastic Panel ............................................ R2.8
Plastic Protractor Tube for Types A
and E Cranes.......................................H3.3
Plastic Screw, 6/32 inch by 5/16 inch............. F4.5
Plastic Screw, 8/32 inch by 5/16 inch............. F3.4
Plastic Tagline Reel with 400-ft Kevlar
Tagline ...............................................D2.3
Plastic Tagline Reel without Tagline...............D2.3
Plates, Numeral, for Metric Staff Gage ........... B1.4
Pliers, Heavy Duty Side-Cutting ...................F10.7
Plug Valve ............................................... R2.17
Plug, Shipping...........................................A2.5
Poly Bags ................................................ R2.19
Polyethylene Float, 1-1/2-inch......................O1.5
Polyethylene Float, 2-1/2 inch......................O1.3
Polyethylene Outer and Inner Sheave ............H3.3
Power Conversion Kit for B-56 Reel............... F3.5
Power Drive Unit Assembly for B-56 &
E-53 Reels........................................... F7.2
Pressed-Sleeve Connector........................... F9.2
Pressure Line Connection Kit ........................ C1.4
Price AA Current Meter............................... A1.3
Price AA Shaft ...........................................A1.8
Price Pygmy Current Meter..........................A2.3
Price Pygmy Shaft......................................A2.4
PS-2 Enclosure without Transducer............... C1.3
PS-2 with LARC Kit and SDI-12..................... C1.3
Pump/Reel-Tubing End-Fitting Kit ................ R1.4
Punch Pins for F&P Recorder........................ L1.3
PVC Floats................................................O1.7
Q
QD1 Interface...........................................M3.4
Quick-Connect Body .................................. R2.14
Quick-Connect Body, Full-Flow Type
(0.500 OD) ......................................... R2.6
Quick-Connect Body, Full-Flow Type
(1/2 NPT) ........................................... R2.4
Quick-Connect Stem .................................. R2.13
Quick-Connect Stem, Full-Flow Type
(0.500 OD) ......................................... R2.4
Quick-Connect Stem, Full-Flow Type .............R2.9
Quick-Connect Stem, Full-Flow Type
(1/2 NPT) ...........................................R2.5
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 9
R
Radio Frequency (RF) Connector.................. Q2.2
Radon Sample Collector Kit .........................R1.18
Rainfall Float Wheel................................... O1.4
Ratchet Crank-Handle Assembly ....................B4.5
Ratchet for A-55 Reel..................................F2.4
Rating Table (AA Current Meter) .................. U3.2
Rating Table (Pygmy Current Meter) ............. U3.2
Reed Switch with Spring............................. A1.9
Reel, A -55 Sounding...................................F2.2
Reel, A -Pack..............................................F1.2
Reel, B-56 ................................................F3.2
Reel, E-53.................................................F4.2
Reel, Lee Au Tagline, with 500 ft Tagline ....... D3.2
Reel, Lee Au Tagline, without Tagline............ D3.2
Reel, Light -Duty Boat Tagline ...................... D4.2
Reel, Plastic Tagline, with 400-ft Kevlar
Tagline............................................... D2.3
Reel, Plastic Tagline, without Tagline ............ D2.3
Reel, Standard-Duty Boat Tagline................. D4.3
Refill Tape............................................... D6.3
Regulator Charger..................................... N1.2
Regulator, Pressure with CGA 580 Inlet ..........C1.2
Removable Hub........................................ D3.3
Repair Kit for Ground-Water Equipment ........ F10.9
Repair Kit for Surface-Water Equipment........ F10.8
Replacement Inserts.................................. A1.11
Retaining Arm Roller for A -55 Reel.................F2.6
Retaining Sheave Guide Bar .........................B4.6
Retaining Spring Roller for A -55 Reel..............F2.6
Retro-Fit Kit for Stand-Up Cable Car............... I2.5
Right End Bracket ..................................... G1.3
Right Roller Latch...................................... G1.6
Rigid Fork for Type-A Truck......................... H2.3
Rigid Fork for Type-E Truck......................... H4.3
Ring-Type Terminal (3/8-inch Stud) ............. F10.5
Ring-Type Terminal (No. 10 Stud)............... F10.4
Ring-Type Terminal (No. 2 Stud)................. F10.5
Rod, 1-inch Diameter, Extension Section.........E3.2
Rod, 1-inch Diameter, Lower Section..............E3.2
Rod, Hex..................................................E1.7
Rod, Round...............................................E1.7
Rod, Top-Setting Wading.............................E1.3
SUBJECT INDEX

SUBJECT INDEX
Roller Assembly for A-55 Reel ...................... F2.2
Roller for Bridge Board ...............................H6.2
Roller for Follower Brake Type.......................I2.7
Roller Holder ............................................G1.6
Roller, Straight Guide .................................G1.4
Round Rod ............................................... E1.7
Round-Head Set Screw ...............................A2.3
Round-Head Wood Screw, No. 10................. B1.4
Rubber Tension Bumper.............................. E1.5
S
Safety Pin, Secures Clevis Pin in Clevis........... F8.3
Safety Straps............................................ S9.2
Sample-Collection Chamber Kit:
Components ....................................... R1.12
Sample-Line Extension Kit .......................... R1.6
Sandpoint Brake without Top Plate.................I2.5
Sandpoint Brake.........................................I2.4
SC32A Interface........................................M3.4
SC532 Interface ........................................M3.3
Screw for Lever Sliding Support Assembly,
Replacement ........................................ E2.5
Screw, Contact Chamber/Pivot .....................A1.5
Screw, Cover Holding .................................D2.4
Screw, Crank and Brake Holder....................D2.5
Screw, Hanger..........................................A1.5
Screw, Plastic, 6/32 inch by 5/16 inch............ F4.5
Screw, Plastic, 8/32 inch by 5/16 inch............ F3.4
Screw, Round-Head Set ..............................A2.3
Screw, Roundhead Wood, No. 10.................. B1.4
Screw, Slotted Set .....................................A2.5
Screw, Slotted Set .....................................A2.6
Screw, Stand and Lock ...............................D2.7
Screw, Tailfin ............................................A1.5
Screw, Thumb, for A -55 Handle.................... F2.5
Screws, Spindle, for Removable Hub..............D3.3
SDI Incremental Interface (LID) ...................M3.5
SDI-12 Interface Cable ............................... P1.6
SDI-12 Junction Box Cable ..........................M2.8
SDI-12 Sensor Cable ..................................M2.9
SDI-12, RS-232 Adapter Cable...................... P1.17
Seal, Hole, Hoffman A-5050, 1/2-inch...........A4.3
Sealing Ring, 1/2-inch ................................A4.4
Sediment-Sampler Hanger........................... F5.2
Septa...................................................... R2.18
Set Screw, Nut, Pivot..................................A1.8
Shaft Bearing............................................D2.4
Shaft Insulator Bushing for Type-E Crane....... H5.3
Shaft with Magnet..................................... A1.9
Shaft, Outer Sheave, for Type-E Crane
(use w/brass sheave)............................ H5.3
Shaft, Outer Sheave, for Type-E Crane
(use w/polymer sheave) ........................ H5.3
Shaft, Threaded.........................................B4.6
Sheave for 0.084-inch Cable for A-Pack
Reel....................................................F1.2
Sheave for B-56 Reel (Optional) ....................F3.3
Sheave, Brass Cable-Car .............................. I2.2
Sheave, Brass Sounding-Line........................ I2.2
Sheave, Brass, for 0.10-in Cable for A-55
Reel....................................................F2.3
Sheave, Polyethylene, Outer and Inner.......... H3.3
Sheaves, Wire Rope.................................... I3.2
Shield for Cobralink SL High-Security Lock....... I2.9
Shipping Box for L&S Recorder.....................L1.4
Shipping Boxes for F&P Recorder ..................L1.3
Shipping Plug........................................... A2.5
Sight-Feed Assembly, with Fittings and
By-Pass ...............................................C1.2
Sign and Stand Kit, Water Survey Crew ..........S7.6
Sign, Crest Stage Gaging Station...................S7.3
Sign, Danger, Government Property,
Keep Off..............................................S7.2
Sign, Danger, No Climbing ...........................S7.5
Sign, Observation Well ................................S7.3
Sign, Stream Gaging Station.........................S7.2
Sign, US Geological Survey, Magnetic
Backing ...............................................S7.4
Sign, Water Quality Monitoring Station ...........S7.4
Sign, Water Survey Crew, Replacement ..........S7.6
Signs, USGS Identifiers with Magnetic
Backing ...............................................S7.5
Sit -Down Cable Car Sample Case
Retainer Kit .......................................... I2.6
Sit -Down Cable Car .................................... I1.3
Sleeve Size A for Ellsworth Cable-End
Terminators ....................................... F10.2
Sleeve Size B for Ellsworth Cable-End
Terminators ....................................... F10.2
Sleeve Size C for Ellsworth Cable-End
Terminators ....................................... F10.3
Sleeve Size D for Ellsworth Cable-End
Terminators ....................................... F10.3
Sliding Kleine Grip ..................................... D5.6
Sliding Kleine Grip, with Steel Cable .............. D5.6
Sliding Support Assembly for Sectional
Wading Rod .........................................E2.4
Sliding Support ..........................................E1.3
Slotted Set Screw...................................... A2.5
10 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Slotted Set Screw ......................................A2.6
SM192 Storage Module ...............................M2.6
Software for 555A......................................Q1.7
Solar Panel...............................................Q2.3
Solderless 9-Pin 'D' Connector (Male).............M2.9
Solid Phase Extraction (SPE) Field Kit ............ R1.2
Sontek Acoustic Doppler Current Meter..........A5.2
Sontek Power Supply..................................A5.2
Sounding Weight, 15-Pound......................... K1.2
Sounding Weight Carriers ............................ K2.3
Spade-Type Terminal ................................F10.4
Spectrophotometer ................................... R2.21
Spindle Screws for Removable Hub ...............D3.3
Spool with Insert .......................................D2.8
Spring Brake Curved Washer........................D2.5
Spring for Reed Switch ...............................A1.10
Spring for Sliding Support Assembly,
Replacement ........................................ E2.4
Spring Lock ..............................................D2.8
Sprocket Hubs .......................................... L4.3
Sprockets................................................. L4.2
Staff Gage Section (Metric) 1 Meter Long ....... B1.3
Staff Gage Sections (English) ....................... B1.2
Stage Kit..................................................O1.3
Stage Potentiometer...................................M4.4
Stage/Rainfall Kit .......................................O1.3
Stainless Steel Counterweights.....................O1.4
Stainless Steel Pin for Pressed-Sleeve
Connector........................................... F9.2
Stainless Steel Tape (for Electric Tape
Gage)................................................. B3.3
Stainless Steel Tape ...................................D6.4
Stainless Steel Tapes (for Tape-Driven
Float Wheels).......................................O2.2
Stand and Lock Screw ................................D2.7
Stand Bolt ................................................D2.7
Stand Lock Washer....................................D2.7
Stand Wing Nut .........................................D2.7
Stand, Plastic Calibration............................. P1.11
Stand, Three-Wheel Base ............................H1.2
Standard Dissolved-Oxygen Membrane .......... P1.8
Standard Rating Table (OAA Current Meter)....U3.2
Standard-Duty Boat Tagline Reel..................D4.3
Standoff Latch for Type-A Crane...................H3.3
Stand-Up Cable Car.....................................I1.2
Stand-Up Cable-Car Sample Case Retainer
Kit ......................................................I2.3
Steel Taglines...........................................D5.2
Stencils, USGS Gerbermask.......................... S7.5
Stopwatch Holder Strap ...............................J1.2
Stopwatch Holder.......................................J1.2
Storage Cup..............................................P1.8
Straight Guide Roller.................................. G1.4
Strainer, Weighted .....................................S3.4
Stranded Stainless Steel Wire ...................... O1.6
Strap, Stopwatch Holder.............................. J1.2
Straps, Safety............................................S9.2
Stream Gaging Station Sign..........................S7.2
Striker for Cadweld One Shot....................... Q3.6
Surveyor 4 Adapter Cable ............................P1.14
Surveyor 4 with 128K Memory......................P1.14
Sutron 8210 Data-Collection Platform
with Phone/Speech Modem.................... Q1.16
Sutron 8210 Data-Collection Platform............ Q1.15
Sutron SDI-12 Cables................................. Q1.14
Swagelok Female Connector ........................R2.2
Swagelok Female Connector ........................R2.6
Swagelok Female Run Tee ..........................R2.18
Swagelok Male Adapter ..............................R2.11
Switch Closure Cable................................... J3.2
Swivel Fork for Type-E Truck....................... H4.2
Synergetics Data-Collection Platform with
SCADA 1 Programming.......................... Q1.10
Synergetics Data-Collection Platform with
SCADA 2 Programming.......................... Q1.11
Synergetics Environmental Enclosure ............ Q1.12
Synergetics Incremental Shaft Encoder.......... Q1.11
Synergetics Telephone Modem Module .......... Q1.12
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 11
T
Tablet, Brass Flood Mark .............................S5.2
Tablet, Brass Gaging Station.........................S5.2
Tagline Termination Kit for 1/16-inch
Kevlar Tagline...................................... D5.3
Tagline Termination Kits............................. D5.3
Tagline, Boat, Gripper/Cutter....................... G1.7
Tagline, Galvanized Steel, Special Order ........ D5.2
Tagline, Kevlar Floating Boat , 0.172-inch
Taglines, Kevlar Wading ............................. D5.4
Taglines, Steel.......................................... D5.2
Tailpiece Assembly, Standard ...................... A1.7
Tape Weight ............................................ D6.4
Tape, Carbon Steel.................................... D6.2
Tape, Refill .............................................. D6.3
Tape, Stainless Steel.................................. D6.4
Tape, Stainless Steel, for Electric Tape
Gage...................................................B3.3
Tape, Woven Clot h.................................... D6.2
Tapered Guide Roller ................................. G1.5
SUBJECT INDEX

SUBJECT INDEX
Tapes, Nubian Steel...................................D6.3
Tapes, Stainless Steel, for Tape-Driven
Float Wheels........................................O2.2
Tech. Info. Sheet, A -55 Reel Drag Brake ........U2.3
Tech. Info. Sheet, B-56 Reel Brake
Adjustment ..........................................U2.3
Tech. Info. Sheet, Basic Data Recorder..........U2.4
Tech. Info. Sheet, Basic Earth Grounding
System...............................................U2.3
Tech. Info. Sheet, B-Connector ....................U2.2
Tech. Info. Sheet, BDR301 Direct
Programming .......................................U2.3
Tech. Info. Sheet, Boat Tagline
Gripper/Cutter......................................U2.3
Tech. Info. Sheet, Cable Brake .....................U2.3
Tech. Info. Sheet, Calibration Stand..............U2.4
Tech. Info. Sheet, CMD Adapter...................U2.2
Tech. Info. Sheet, CR10..............................U2.2
Tech. Info. Sheet, Electric Tape Gage ............U2.2
Tech. Info. Sheet, Electrical Surge Arrester.....U2.2
Tech. Info. Sheet, Minimonitor pH
Combination Electrode ...........................U2.3
Tech. Info. Sheet, Model 301 Basic Data
Recorder.............................................U2.2
Tech. Info. Sheet, Model 301 Cables..............U2.4
Tech. Info. Sheet, Model 80 Cables...............U2.4
Tech. Info. Sheet, Optic-Head Meters ............U2.2
Tech. Info. Sheet, PS-2 Pressure Sensor.........U2.2
Tech. Info. Sheet, Shaft Encoders.................U2.3
Tech. Info. Sheet, Sounding Reel Cable..........U2.3
Tech. Info. Sheet, Sounding Reel..................U2.2
Tech. Info. Sheet, Standup Cable Car ............U2.4
Tech. Info. Sheet, Static Tube......................U2.2
Tech. Info. Sheet, Tag-Line Reel...................U2.3
Tech. Info. Sheet, Tail-Fin Assembly ..............U2.3
Tech. Info. Sheet, Ultrasonic Velocity Meter....U2.2
Tech. Info. Sheet, Universal Junction Box.......U2.3
Tech. Info. Sheet, Wire-Weight Gage.............U2.2
Tee, Teflon .............................................. R2.12
Teflon Bag .............................................. R2.20
Teflon Junction ......................................... P1.13
Teflon Junction, Series 4............................. P1.20
Teflon Tee ............................................... R2.12
Telescoping Boom without Nose Piece ...........G1.2
Test Box for L&S Input/Output Recorder........ L2.3
Test Record, Earth Resistance......................U3.2
Thermometer, Digital Hand-Held (General
Purpose)............................................. S1.2
Thermometer, Digital Hand-Held (Liquids
Only).................................................. S1.2
Thimbles, Galvanized Steel...........................I3.3
Threaded Shaft..........................................B4.6
Threading Shaft for A -Pack Reel....................F1.2
Threading Shaft for B-56 Reel.......................F3.2
Threading Shaft for E-53 Reel.......................F4.2
Three-Wheel Base Stand ............................ H1.2
Three-Wheel Base ..................................... H1.2
Thumb Screw for A -55 Handle ......................F2.5
Tilting Harness ..........................................K2.4
Tipping Bucket Rain Gage............................S2.2
TL-10 Cable Clip ...................................... F10.3
TL-8 Cable Clip ........................................ F10.3
Tongue or Handle for Type-A Truck.............. H2.2
Tongue or Handle for Type-E Truck.............. H4.2
Tool, Yoke Alignment (for Price AA
Current Meter)..................................... A1.8
Tool, Yoke Alignment (for Price Pygmy
Current Meter)..................................... A2.7
Top Plate with Clamp.................................. I2.4
Top Rail Assembly for Cable Cars .................. I2.3
Top-Setting Wading Rod..............................E1.3
Transducer, Model No. 7652B...................... A4.2
Transducer, ORE Model 7612....................... A4.5
Tray, Polypropylene ...................................R2.19
Trigger Spring for Handle.............................E1.6
Trigger Switch for Power Drive Unit ...............F7.3
Trigger with Bumper...................................E1.4
Trunk for A -55 Reel....................................F2.7
Trunk for B-56 Reel....................................F3.5
Trunk for E-53 Reel....................................F4.4
Trunk for Power Drive Unit...........................F7.2
Tube Adapter ...........................................R2.15
Tube, Plastic Protractor, for Types A and
E Cranes............................................. H3.3
Tubing, Amber Latex ..................................R2.8
Tubing, Convoluted ...................................R2.11
Tubing, Teflon, Smooth Wall (0.375 ID)..........R2.3
Tubing, Teflon, Smooth Wall (0.500 ID)..........R2.12
Tubing, Tygon...........................................S3.5
Tufflite Adapter .........................................R2.2
Turbidity Probe..........................................P1.12
Turbidity Probe..........................................P1.20
Turbidity Probe..........................................P2.7
Turbidity-Sample Tube Kit ...........................R1.10
Turnbuckles.............................................. I3.4
Two-Conductor Connector (Orange).............. N1.3
Two-Conductor Connector (Red).................. N1.4
Tygon Tubing............................................S3.5
Type-A Crane........................................... H3.2
Type-A Depth Indicator...............................F6.2
Type-A Four-Wheel Truck........................... H2.2
12 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

Type-B Connector...................................... F8.2
Type-E Crane............................................H5.2
Type-E Heavy-Duty Truck............................H4.2
U
Underwater Connector Cable Termination
Kit ..................................................... F1.3
Uninsulated, Tape-Driven Float Wheel ...........O1.2
Universal Shaft Encoder Cable......................M4.5
Upper-Bushing Bearing ...............................A2.3
US Geological Survey, Magnetic Backing
Sign ................................................... S7.4
USGS Gerbermask Stencils .......................... S7.5
USGS Identifiers with Magnetic Backing ......... S7.5
USGS Regulator Charger.............................N1.4
UVM, ORE Model 7510................................A4.4
UVM, ORE Model No. 7300 ..........................A4.2
V
Valve, Plug............................................... R2.17
Valve, Three-Way Stopcock ........................ R2.7
V-Belts for J&H Motor................................. F7.3
Videos “How to Cadweld One Shot”...............Q3.2
W
Wading Rod, Top-Setting ............................ E1.3
Wall Charger.............................................N1.2
Water-Quality Monitor, 600XL.......................P2.3
Water Quality Monitoring Station Sign............S7.4
Water Survey Crew Replacement Sign............S7.6
Water Survey Crew Sign and Stand Kit ...........S7.6
Weight Pins...............................................K2.3
Weight, 5-Pound........................................B4.2
Weight, 15-Pound Sounding.........................K1.2
Weight, Tape ........................................... D6.4
Weighted Sensor Guard...............................P1.10
Weighted Strainer......................................S3.4
Well Cap, 4-inch ........................................C4.7
Well Cap, 6-inch ........................................C4.7
Wing Nut 3/8-16 for A-55, B-56, & E-53
Reels ..................................................F2.5
Wire Rope Sheaves..................................... I3.2
Wire, Stranded Stainless Steel ..................... O1.6
Wire-Weight Gage Assembly.........................B4.2
Woven Cloth Tape..................................... D6.2
X Y Z
X-Yagi Antenna Element Replacement Pack.... Q2.3
X-Yagi Antenna with Mounting Kit................. Q2.2
Y Cable for Model 301 Data Logger............... M2.7
Y Cable for Model 80 Data Logger................ M2.10
Yoke Alignment Tool (for Price AA Current
Meter)................................................ A1.8
Yoke Alignment Tool (for Price Pygmy
Current Meter)..................................... A2.7
YSI Flow -Thru Chamber (Model 6000)............P2.6
YSI Flow-Thru Chamber (Models 600,
600XL, & 600XLM).................................P2.4
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 13
SUBJECT INDEX

STOCK NUMBER INDEX
STOCK NUMBER INDEX
1101001 ...............A1.3
1101002 ...............A1.3
1101005 ...............A1.3
1101008 ...............A1.4
1101012 ...............A1.4
1101013 ...............A1.4
1101014 ...............A1.4
1101015 ...............A1.5
1101021 ...............A1.5
1101022 ...............A1.5
1101023 ...............A1.5
1101024 ...............A1.6
1101027 ...............A1.6
1101030 ...............A1.6
1101032 ...............A1.6
1101033 ...............A1.7
1101049 ...............A1.7
1101053 ...............A1.7
1101055 ...............A1.7
1101056 ...............A1.8
1101057 ...............A1.8
1101058 ...............A1.8
1101060 ...............A1.9
1101062 ...............A1.9
1101063 ...............A1.9
1101064 ...............A1.10
1101067 ...............A1.10
1101069 ...............A1.10
1101075 ...............A1.11
1101077 ...............A1.11
1101079 ...............A1.11
1103001 ...............A2.3
1103003 ...............A2.3
1103005 ...............A2.3
1103006 ...............A2.4
1103011 ...............A2.4
1103012 ...............A2.4
1103019 ...............A2.4
1103020 ...............A2.5
1103021 ...............A2.5
1103022 ...............A2.5
1103023 ...............A2.5
1103024 ...............A2.6
1103025 ...............A2.6
1103026 ...............A2.6
1103027 ...............A2.7
1103028 ...............A2.7
1104001 ...............A3.2
1104002 ...............A3.3
1104003 ...............A3.3
1111021 ...............A4.2
1111022 ...............A4.2
1111023 ...............A4.2
1111026 ...............A4.3
1111030 ...............A4.3
1111031 ...............A4.3
1111032 ...............A4.3
1111035 ...............A4.4
1111036 ...............A4.4
1111050 ...............A4.4
1111055 ...............A4.5
1112010 ...............A4.5
1112050 ...............A4.5
1113010 ...............A5.2
1113012 ...............A5.2
1201001 ...............B1.2
1201002 ...............B1.2
1201003 ...............B1.2
1201004 ...............B1.2
1201005 ...............B1.2
1201006 ...............B1.2
1201007 ...............B1.2
1201008 ...............B1.2
1201009 ...............B1.2
1201010 ...............B1.2
1201011 ...............B1.2
1201012 ...............B1.2
1201013 ...............B1.2
1201014 ...............B1.2
1201015 ...............B1.2
1201016 ...............B1.2
1201017 ...............B1.2
1201018 ...............B1.2
1201019 ...............B1.2
1201020 ...............B1.2
1201021 ...............B1.2
1201022 .............. B1.2
1201023 .............. B1.2
1201024 .............. B1.2
1201025 .............. B1.2
1201026 .............. B1.2
1201027 .............. B1.2
1201028 .............. B1.2
1201029 .............. B1.2
1201030 .............. B1.2
1201031 .............. B1.3
1201032 .............. B1.4
1201033 .............. B1.4
1201034 .............. B1.4
1201035 .............. B1.4
1201036 .............. B1.4
1201037 .............. B1.4
1201038 .............. B1.4
1201039 .............. B1.4
1201040 .............. B1.4
1201041 .............. B1.4
1201042 .............. B1.4
1202001 .............. B2.2
1202002 .............. B2.2
1202003 .............. B2.3
1202004 .............. B2.3
1202005 .............. B2.3
1202006 .............. B2.3
1203001 .............. B3.2
1203002 .............. B3.2
1203003 .............. B3.2
1203004 .............. B3.3
1203005 .............. B3.3
1203006 .............. B3.3
1204001 .............. B4.2
1204002 .............. B4.2
1204003 .............. B4.2
1204005 .............. B4.3
1204006 .............. B4.3
1204007 .............. B4.3
1204008 .............. B4.3
1204009 .............. B4.4
1204010 .............. B4.4
1204011 .............. B4.4
14 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

1204012............... B4.5
1204015............... B4.5
1204020............... B4.5
1204025............... B4.6
1204030............... B4.6
1204031............... B4.6
1213101............... C1.2
1213102............... C1.2
1213105............... C1.2
1213122............... C1.3
1213125............... C1.3
1213130............... C1.4
1213133............... C1.4
1213134............... C1.4
1213135............... C1.5
1213138............... C1.5
1213139............... C1.5
1213140............... C1.6
1214000............... C2.2
1214010............... C2.3
1215000............... C3.2
1216010............... C4.2
1216013............... C4.3
1216020............... C4.4
1216023............... C4.5
1216050............... C4.6
1216052............... C4.7
1216054............... C4.7
1216055............... C4.8
1216056............... C4.8
1216059............... C4.8
1216060............... C4.9
1221000............... C5.2
1221005............... C5.2
1221012............... C5.2
1221050............... C5.3
1301001............... D1.2
1302004............... D2.3
1302005............... D2.3
1302012............... D2.3
1302013............... D2.4
1302014............... D2.4
1302015............... D2.4
1302016............... D2.4
1302017............... D2.4
1302018............... D2.5
1302019............... D2.5
1302020............... D2.5
1302021............... D2.5
1302022............... D2.5
1302023............... D2.6
1302024............... D2.6
1302025............... D2.6
1302026............... D2.6
1302027............... D2.6
1302028............... D2.7
1302029............... D2.7
1302030............... D2.7
1302031............... D2.7
1302032............... D2.7
1302033............... D2.7
1302034............... D2.8
1302035............... D2.8
1302036............... D2.8
1303002............... D3.2
1303003............... D3.2
1303004............... D3.3
1303005............... D3.3
1303006............... D3.3
1304002............... D4.2
1304003............... D4.2
1304004............... D4.2
1305001............... D4.3
1307001............... D5.2
1307003............... D5.2
1307006............... D5.2
1307008............... D5.3
1307009............... D5.3
1307010............... D5.3
1307011............... D5.3
1307014............... D5.4
1307015............... D5.4
1307016............... D5.5
1307017............... D5.5
1307018............... D5.4
1307019............... D5.4
1307022............... D5.6
1307023............... D5.6
1308000............... D6.2
1309000............... D6.2
1309001............... D6.3
1309002............... D6.3
1309003............... D6.3
1309004............... D6.3
1309005............... D6.3
1309006............... D6.3
1309007 ...............D6.3
1309008 ...............D6.3
1309009 ...............D6.3
1309013 ...............D6.4
1309015 ...............D6.4
1309020 ...............D6.4
1501010 ...............S1.2
1501030 ...............S1.2
2101001 ...............E1.3
2101002 ...............E1.3
2101003 ...............E1.3
2101004 ...............E1.4
2101005 ...............E1.4
2101006 ...............E1.4
2101007 ...............E1.4
2101008 ...............E1.5
2101009 ...............E1.5
2101010 ...............E1.5
2101011 ...............E1.5
2101012 ...............E1.6
2101013 ...............E1.6
2101014 ...............E1.6
2101015 ...............E1.6
2101016 ...............E1.7
2101017 ...............E1.7
2101020 ...............E1.7
2101021 ...............E1.7
2102002 ...............E2.3
2102003 ...............E2.3
2102005 ...............E2.3
2102006 ...............E2.4
2102007 ...............E2.4
2102008 ...............E2.4
2102009 ...............E2.5
2102012 ...............E2.5
2102013 ...............E2.5
2103001 ...............E3.2
2103002 ...............E3.2
2103003 ...............E3.2
2201001 ...............D7.2
2301000 ............... F1.2
2301003 ............... F1.2
2301004 ............... F1.2
2301007 ............... F1.3
2301008 ............... F1.3
2301020 ............... F1.3
2302000 ............... F2.2
2302002 ............... F2.2
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 15
STOCK NUMBER INDEX

STOCK NUMBER INDEX
2302003 ...............F2.3
2302004 ...............F2.3
2302005 ...............F2.3
2302006 ...............F2.3
2302007 ...............F2.4
2302008 ...............F2.4
2302009 ...............F2.4
2302010 ...............F2.4
2302011 ...............F2.5
2302012 ...............F2.5
2302013 ...............F2.5
2302014 ...............F2.5
2302015 ...............F2.6
2302016 ...............F2.6
2302017 ...............F2.6
2302018 ...............F2.7
2302022 ...............F2.7
2302075 ...............F2.7
2302076 ...............F2.8
2302077 ...............F2.8
2303000 ...............F3.2
2303002 ...............F3.2
2303003 ...............F3.2
2303004 ...............F3.3
2303005 ...............F3.3
2303006 ...............F3.3
2303008 ...............F3.3
2303009 ...............F3.4
2303010 ...............F3.4
2303011 ...............F3.4
2303013 ...............F3.5
2303014 ...............F3.5
2303017 ...............F3.5
2303018 ...............F3.6
2303019 ...............F3.6
2304000 ...............F4.2
2304002 ...............F4.2
2304003 ...............F4.2
2304004 ...............F4.3
2304005 ...............F4.3
2304006 ...............F4.3
2304008 ...............F4.3
2304009 ...............F4.4
2304012 ...............F4.4
2304015 ...............F4.4
2304016 ...............F4.5
2304017 ...............F4.5
2304018 ...............F4.5
2304019 ...............F4.6
2305004 ...............F5.2
2305005 ...............F5.2
2306001 ...............F6.2
2306002 ...............F6.2
2306003 ...............F6.2
2306004 ...............F6.2
2307001 ...............F7.2
2307002 ...............F7.2
2307003 ...............F7.3
2307004 ...............F7.3
2307005 ...............F7.3
2307006 ...............F7.3
2308001 ...............F8.2
2308002 ...............F8.2
2308003 ...............F8.2
2308004 ...............F8.2
2308005 ...............F8.3
2308006 ...............F8.3
2308007 ...............F8.3
2309001 ...............F9.2
2309002 ...............F9.2
2309003 ...............F9.2
2314017 ............. F10.9
2316001 ............. F10.2
2316002 ............. F10.2
2316003 ............. F10.2
2316004 ............. F10.2
2316005 ............. F10.2
2316006 ............. F10.3
2316007 ............. F10.3
2316008 ............. F10.3
2316009 ............. F10.3
2316010 ............. F10.4
2316011 ............. F10.4
2316012 ............. F10.4
2316013 ............. F10.4
2316014 ............. F10.5
2316015 ............. F10.5
2316016 ............. F10.5
2316017 ............. F10.5
2316018 ............. F10.6
2316019 ............. F10.6
2316020 ............. F10.6
2316021 ............. F10.6
2316025 ............. F10.7
2316026 ............. F10.7
2316027 ............. F10.8
2316028 .............F10.8
2401000 .............. G1.2
2401001 .............. G1.2
2401002 .............. G1.3
2401003 .............. G1.3
2401004 .............. G1.3
2401005 .............. G1.4
2401006 .............. G1.4
2401007 .............. G1.4
2401008 .............. G1.5
2401009 .............. G1.5
2401010 .............. G1.5
2401011 .............. G1.5
2401012 .............. G1.6
2401013 .............. G1.6
2401014 .............. G1.6
2401018 .............. G1.7
2501001 .............. H1.2
2501002 .............. H1.2
2501003 .............. H3.4
2502001 .............. H2.2
2502002 .............. H2.2
2502004 .............. H2.3
2502005 .............. H2.3
2502006 .............. H2.3
2503001 .............. H3.2
2503002 .............. H3.2
2503003 .............. H3.3
2503007 .............. H3.3
2503008 .............. H3.3
2504001 .............. H4.2
2504002 .............. H4.2
2504006 .............. H4.2
2504007 .............. H4.3
2504010 .............. H4.3
2505001 .............. H5.2
2505007 .............. H5.2
2505008 .............. H5.3
2505009 .............. H5.3
2505010 .............. H5.3
2601001 ................I1.2
2601002 ................I2.2
2601003 ................I2.2
2601004 ................I2.2
2601005 ................I2.3
2601006 ................I2.3
2601010 ................I2.3
2601011 ................I2.4
16 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

2601012.................I2.4
2601014.................I2.4
2601018.................I2.5
2601020.................I2.5
2601030.................I2.5
2602001.................I1.3
2602002.................I2.6
2603001.................I2.6
2603002.................I2.7
2603003.................I2.7
2604001.................I2.7
2604003.................I2.8
2605001.................I2.7
2606001.................I2.7
2607001.................I2.8
2607002.................I2.9
2608001.................I2.9
2609001.................I3.2
2609002.................I3.2
2609003.................I3.2
2609004.................I3.2
2609005.................I3.2
2609007.................I3.2
2609010.................I3.2
2609011.................I3.2
2609012.................I3.2
2609020.................I3.3
2609021.................I3.3
2609022.................I3.3
2609023.................I3.3
2609024.................I3.3
2609030.................I3.3
2609031.................I3.3
2609032.................I3.3
2609033.................I3.3
2609041.................I3.4
2609042.................I3.4
2609060.................I3.4
2609065.................I3.4
2701001............... H6.2
2701002............... H6.2
2701003............... H6.3
3101001................J1.2
3101002................J1.2
3101003................J1.2
3201001................J2.2
3201002................J2.2
3201003................J2.3
3201007................J2.3
3202001................J3.2
3202003................J3.2
3202004................J3.2
3202005................J3.3
3202006................J3.3
3202007................J3.3
3202025................J4.2
3301001............... K1.2
3301002............... K1.2
3301003............... K1.2
3301004............... K1.2
3301005............... K1.2
3301006............... K1.2
3302001............... K2.2
3302002............... K2.2
3302003............... K2.2
3303001............... K2.3
3303002............... K2.3
3303003............... K2.3
3303004............... K2.3
3303005............... K2.3
3303006............... K2.3
3304001............... K2.3
3304002............... K2.3
3305001............... K2.4
4301001............... R1.2
5101001................L1.2
5101002................L1.2
5101004................L1.3
5101005................L1.3
5101006................L1.3
5101007................L1.3
5101008................L1.4
5102001................L2.2
5102002................L2.2
5102003................L2.3
5102005................L2.3
5201001...............M1.2
5201002...............M1.3
5202001...............M1.4
5202002...............M1.5
5202004...............M2.6
5202005...............M2.2
5202008...............M1.6
5203003...............M1.7
5203010...............M1.8
5203014...............M2.3
5203015 .............. M3.2
5203020 .............. M3.2
5203025 .............. M3.3
5205002 .............. M1.9
5205004 .............. M1.10
5205010 .............. M1.11
5205020 .............. M1.12
5205050 .............. M2.3
5206001 .............. M2.5
5206002 .............. M2.6
5206003 .............. M2.6
5206004 .............. M3.3
5206005 .............. M3.4
5206006 .............. M3.4
5206008 .............. M2.2
5206015 .............. M3.5
5207001 .............. M4.2
5207002 .............. M4.2
5207003 .............. M4.3
5207004 .............. M4.3
5207006 .............. M4.4
5207010 .............. M4.4
5207015 .............. M4.5
5208001 .............. M2.7
5208002 .............. M2.7
5208003 .............. M2.7
5208004 .............. M2.8
5208005 .............. M2.8
5208006 .............. M2.8
5208007 .............. M2.9
5208009 .............. M2.9
5208011 .............. M2.9
5208020 .............. M2.10
5208021 .............. M2.10
5208023 .............. M2.10
5208027 .............. M2.11
5208028 .............. M2.11
5209001 .............. M1.13
5209002 .............. M1.14
5209003 .............. M2.4
5209004 .............. M2.4
5209009 .............. M2.4
5209025 .............. M1.17
5209030 .............. M2.12
5209050 .............. M1.15
5209052 .............. M1.16
5209055 .............. M2.5
5209060 .............. M2.3
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 17
STOCK NUMBER INDEX

STOCK NUMBER INDEX
5209065 .............. M2.3
5303001 ............... L3.2
5304001 ............... L4.2
5304010 ............... L4.2
5304011 ............... L4.2
5304012 ............... L4.2
5304013 ............... L4.2
5304014 ............... L4.2
5304015 ............... L4.3
5304016 ............... L4.3
5305007 ...............N1.2
5305008 ...............N1.2
5305009 ...............N1.2
5305010 ...............N1.3
5305011 ...............N1.3
5305012 ...............N1.3
5305018 ...............N1.3
5305022 ...............N1.4
5305023 ...............N1.4
5305040 ...............N1.4
5306002 .............. O1.2
5306003 .............. O1.2
5306004 .............. O1.2
5306005 .............. O1.2
5306006 .............. O1.3
5306007 .............. O1.3
5306008 .............. O1.3
5306009 .............. O1.4
5306012 .............. O1.4
5306013 .............. O1.5
5306014 .............. O1.5
5306015 .............. O1.5
5306016 .............. O1.5
5306017 .............. O1.4
5306018 .............. O1.4
5306019 .............. O1.4
5306020 .............. O1.6
5306021 .............. O1.6
5306022 .............. O1.6
5306025 .............. O2.3
5306030 .............. O1.7
5306035 .............. O1.7
5306037 .............. O1.7
5306046 .............. O1.4
5307001 .............. O2.2
5307002 .............. O2.2
5307003 .............. O2.2
5307004 .............. O2.2
5307010 .............. O2.2
5307011 .............. O2.2
5307015 .............. O2.2
5307016 .............. O2.3
5307017 .............. O2.3
5308001 ............... L5.2
5308002 ............... L5.2
5308003 ............... L5.2
5308004 ............... L5.2
5308005 ............... L5.2
5308010 ............... L5.2
5308011 ............... L5.2
5308013 ............... L5.2
5308014 ............... L5.2
5308020 ............... L5.3
5309011 .............. O1.4
5309045 .............. O1.4
6103000 ...............P1.2
6103003 ...............P1.2
6103005 ...............P1.3
6103006 ...............P1.3
6103008 ...............P1.4
6103009 ...............P1.4
6103010 ...............P1.4
6103011 ...............P1.4
6103012 ...............P1.5
6103013 ...............P1.5
6103014 ...............P1.5
6103015 ...............P1.6
6103016 ...............P1.6
6103017 ...............P1.7
6103022 ...............P1.7
6103023 ...............P1.8
6103024 ...............P1.8
6103025 ...............P1.9
6103026 ...............P1.9
6103027 ...............P1.10
6103028 ...............P1.10
6103032 ...............P1.11
6103035 ...............P1.11
6103036 ...............P1.11
6103040 ...............P1.12
6103042 ...............P1.12
6103043 ...............P1.12
6103053 ...............P1.4
6103054 ...............P1.4
6103057 ...............P1.13
6103060 ...............P1.13
6103065 .............. P1.13
6103070 .............. P1.14
6103075 .............. P1.14
6103076 .............. P1.15
6103077 .............. P1.15
6103078 .............. P1.15
6103079 .............. P1.15
6103080 .............. P1.16
6103082 .............. P1.16
6103083 .............. P1.17
6103090 .............. P1.17
6103092 .............. P1.18
6103093 .............. P1.18
6103094 .............. P1.18
6103095 .............. P1.19
6103099 .............. P1.19
6103100 .............. P1.19
6103104 .............. P1.20
6103106 .............. P1.20
6103107 .............. P1.20
6104001 .............. P2.2
6104005 .............. P2.2
6104010 .............. P2.3
6104011 .............. P2.3
6104012 .............. P2.4
6104013 .............. P2.4
6104014 .............. P2.5
6104015 .............. P2.5
6104016 .............. P2.6
6104017 .............. P2.6
6104018 .............. P2.7
6104020 .............. P2.7
6104030 .............. P2.7
6104031 .............. P2.7
6104032 .............. P2.7
6104034 .............. P2.7
6104037 .............. P2.7
6104038 .............. P2.8
6104040 .............. P2.8
6104042 .............. P2.9
6104050 .............. P2.9
6104060 .............. P2.9
6104061 .............. P2.10
6104070 .............. P2.10
6104095 .............. P2.10
6104096 .............. P2.11
6104097 .............. P2.11
6104100 .............. P2.11
18 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/

6301001............... P3.2
6301003............... P3.2
6301004............... P3.3
7014010............... S2.2
7042551............... S3.2
7042555............... S3.2
7042556............... S3.3
7042557............... S3.3
7042558............... S3.4
7042559............... S3.4
7042560............... S3.5
7080001............... S4.2
7080002............... S4.3
7101005............... S5.2
7101006............... S5.2
7101007............... S5.3
7101009............... S5.3
7102001............... S6.2
7102002............... S6.2
7103001............... S7.2
7103002............... S7.2
7103003............... S7.3
7103004............... S7.3
7103005............... S7.4
7103006............... S7.4
7103008............... S7.5
7103010............... S7.5
7103015............... S7.5
7103020............... S7.5
7103021............... S7.5
7103022............... S7.5
7103023............... S7.5
7103050............... S7.6
7103052............... S7.6
7105001............... S7.7
7302002............... S8.2
7405001............... S9.2
7701001............. S10.2
8102030...............Q1.2
8102031...............Q1.2
8102032...............Q1.3
8102033...............Q1.3
8102034...............Q1.4
8102036...............Q1.4
8102039...............Q1.5
8102040...............Q1.5
8102041...............Q1.5
8102042...............Q1.6
8102050...............Q1.6
8102051...............Q1.7
8102052...............Q1.7
8102058...............Q1.8
8102059...............Q1.9
8103003...............Q1.10
8103011...............Q1.11
8103018...............Q1.12
8103020...............Q1.11
8103025...............Q1.12
8104001...............Q2.2
8104015...............Q2.2
8104020...............Q2.2
8104050...............Q2.3
8104060...............Q2.3
8104080...............Q2.3
8105001...............Q1.13
8105010...............Q1.13
8105015...............Q1.14
8105018...............Q1.14
8105030...............Q1.15
8105050...............Q1.16
8106010...............Q3.2
8106012...............Q3.2
8106014...............Q3.3
8106016...............Q3.3
8106018...............Q3.4
8106020...............Q3.4
8106022...............Q3.4
8106024...............Q3.5
8106026...............Q3.5
8106030...............Q3.5
8106031...............Q3.6
8106032...............Q3.6
8106033...............Q3.6
0000100............... U3.2
0000602............... U1.2
0000701............... U1.2
0000805............... U1.2
0001001............... U1.2
0001002............... U2.2
0001010............... U1.2
0001029............... U2.2
0001107............... U2.2
0001111............... U1.2
0001112............... U1.2
0001113............... U1.2
0001203............... U2.2
0001204 ...............U2.2
0001209 ...............U2.2
0001212 ...............U1.2
0001213 ...............U2.2
0001214 ...............U1.2
0001215 ...............U1.2
0001216 ...............U1.3
0001221 ...............U1.3
0002101 ...............U2.2
0002302 ...............U2.2
0002308 ...............U2.2
0003202 ...............U1.3
0005202 ...............U1.3
0005203 ...............U1.3
0005204 ...............U2.2
0005206 ...............U1.3
0005208 ...............U2.2
0005210 ...............U2.3
0005305 ...............U1.3
0006100 ...............U2.3
0006102 ...............U1.3
0006103 ...............U1.3
0007080 ...............U3.2
0008102 ...............U2.3
0008103 ...............U1.3
0008105 ...............U1.3
0011011 ...............U3.2
0011031 ...............U3.2
0011071 ...............U3.2
0011115 ...............U1.3
0012155 ...............U1.4
0013010 ...............U2.3
0023030 ...............U2.3
0032025 ...............U1.4
0051071 ...............U1.4
0052060 ...............U1.4
0052061 ...............U1.4
0052062 ...............U1.4
0052063 ...............U1.4
0052070 ...............U1.4
0052071 ...............U1.4
0052072 ...............U1.4
0052073 ...............U1.5
0052080 ...............U2.3
0052086 ...............U1.5
0052310 ...............U1.5
0061041 ...............U1.5
0081020 ...............U1.5
wwwhif.er.usgs.gov/uo/ • FAX (228) 688-1610 • (800) 382-0634 19
STOCK NUMBER INDEX

STOCK NUMBER INDEX
0081050 ...............U1.5
0081051 ...............U1.5
0081053 ...............U1.5
0081060 ...............U2.3
0081061 ...............U1.5
0081062 ...............U1.5
0110706 ...............U2.3
0113050 ...............U3.2
0121315 ...............U1.5
0230218 ...............U2.3
0230275 ...............U2.3
0240118 ...............U2.3
0260012 ...............U2.3
0260103 ...............U2.4
0520802 ...............U2.4
0520804 ...............U2.4
0520843 ...............U2.4
0520901 ...............U1.6
0520902 ...............U1.6
0520905 ...............U1.6
0520925 ...............U1.6
0610300 ...............U1.6
0610306 ...............U1.6
0610307 ...............U1.6
0610308 ...............U1.6
0610332 ...............U2.4
0610360 ...............U1.6
0610400 ...............U1.6
0742551 ...............U1.6
0810500 ...............U1.6
CS1001 ...............R2.2
CS1002 ...............R2.2
CS1003 ...............R2.3
CS1004 ...............R2.4
CS1005 ...............R2.4
CS1006 ...............R2.5
CS1007 ...............R2.5
CS1008 ...............R2.6
CS1009 ...............R2.6
CS1010 ...............R2.7
CS1011 ...............R2.7
CS1012 ...............R2.8
CS1013 ...............R2.8
CS1014 ...............R2.9
CS1015 ...............R2.9
CS1016 ...............R2.10
CS1017 ...............R2.10
CS1018 ...............R2.11
CS1019 ...............R2.11
CS1020 ...............R2.12
CS1021 ...............R2.12
CS1022 ...............R2.13
CS1023 ...............R2.13
CS1024 ...............R2.14
CS1025 .............. R2.14
CS1026 .............. R2.15
CS1028 .............. R2.15
CS1029 .............. R2.16
CS1030 .............. R2.16
CS1031 .............. R2.17
CS1032 .............. R2.17
CS1033 .............. R2.18
CS1034 .............. R2.18
CS1035 .............. R2.19
CS1036 .............. R2.19
CS1037 .............. R2.20
CS1038 .............. R2.20
CS1039 .............. R2.21
CS1040 .............. R2.21
CSK001 .............. R1.3
CSK002 .............. R1.4
CSK003 .............. R1.5
CSK004 .............. R1.6
CSK005 .............. R1.8
CSK006 .............. R1.10
CSK007 .............. R1.11
CSK008 .............. R1.12
CSK009 .............. R1.15
CSK010 .............. R1.16
CSK011 .............. R1.18
20 (800) 382-0634 • FAX (228) 688-1610 • wwwhif.er.usgs.gov/uo/