Simrad QS50 Quick Stick Manual - Simrad Yachting
Simrad QS50 Quick Stick Manual - Simrad Yachting
Simrad QS50 Quick Stick Manual - Simrad Yachting
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Simrad</strong> <strong>QS50</strong> <strong>Quick</strong> <strong>Stick</strong><br />
3 INSTALLATION<br />
3.1 Mounting<br />
The <strong>QS50</strong> is designed for arm rest or desktop mounting, indoor<br />
or outdoor. It should be installed where it is most convenient for<br />
the user, and with special regard to environmental specifications<br />
for the unit.<br />
The mounting surface must be flat and even to within 0.5 mm.<br />
• Drill the 4 mounting holes and make a panel cutout according<br />
to the supplied template.<br />
• Use the supplied gasket between the panel and the unit.<br />
• Use the supplied 19 mm screws to fasten the joystick unit to<br />
the panel.<br />
• Apply the front panel corners.<br />
Optional back cover<br />
For mounting in exposed<br />
environments, the <strong>QS50</strong> can be<br />
supplied with an optional back<br />
cover. See page 20 for depth of unit.<br />
The optional back cover has a cable<br />
gland at the bottom. The cable gland<br />
can also be mounted on side of the<br />
back cover.<br />
12 20222246 / Rev. A