PER-S – Classic Pericline™ Small Scale - Architectural Area Lighting

PER-S – Classic Pericline Small Scale
• Patented Moldcast optics
• 70-250 watt HID (HPS and PSMH)
• Two geometrical housing options (cylindrical and rectilinear)
1. LuminairE 2. LamP/baLLasT 3. CoLor 4. oPTions
1. LuminaiRE
PosT ToP mounT
Slips over 2 3⁄8"/61mm O.D. x 4"/100mm long tenon*
PER-S-CY (Cylindrical)
PER-S-RL (Rectilinear)
Twin PosT ToP mounT
2 arms slips over a 2 3/8"/60mm O.D. x 4"/100mm long tenon*
PER-S-CY-PT2 (Cylindrical)
PER-S-RL-PT2 (Rectilinear)
waLL mounT
Wall mounted arm with ballast compartment. Up to 150PSMH
PER-S-CY-WMA (Cylindrical)
PER-S-RL-WMA (Rectilinear)
* See options. Requires tenon on pole.
Note: For fixtures utilizing 150PSMH and 150HPS and below, the
standard slipfitter size shall be 4"/100mm square for RL and 4"/100mm
O.D. for the CY. Slipfitter is designed for use with a 2 3 ⁄8"/61mm O.D. by
4"/100mm high pole tenon.
For fixtures utilizing 250PSMH and 200HPS and above, the standard
slipfitter size shall be 5"/127mm square for the RL and 5"/127mm O.D.
for the CY. Slipfitter is designed for use with a 2 3 ⁄8"/61mm O.D. by
4"/100mm high pole tenon.
2. LamP/baLLaSt
mETaL HaLiDE (120/208/240/277 volt ballast)
Mogul base, ED-28 lamp
70MH
Medium base, ED-17 lamp
100MH
PuLsE sTarT mETaL HaLiDE (120/208/240/277 volt ballast)
Mogul base, ED-28 lamp
150PSMH 200PSMH
250PSMH
HiGH PrEssurE soDium (120/208/240/277 volt ballast)
Mogul base, ED-23 1/2 lamp
70HPS 100HPS
150HPS
Mogul base, ED-18 lamp
200HPS 250HPS
All ballasts are factory wired for 277 volts, unless specified. Lamps not
included.
ARCHITECTURAL AREA LIGHTING
16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.aal.net
Copyright © 2012 | REV 6.12
TYPE
• Wall or pole mount
• Powder coat finish in thirteen standard colors with a
polymer primer sealer
3. COLOR
AWT (Arctic White) CRT (Corten)
BLK (Black) MAL (Matte Aluminum)
MTB (Matte Black) MDG (Medium Grey)
DGN (Dark Green) ATG (Antique Green)
DBZ (Dark Bronze) LGY (Light Grey)
WRZ (Wheathered Bronse) RAL/PREMIUM
BRM (Metallic Bronze) COLOR (Provide RAL)
VBL (Verde Blue) CUSTOM COLOR
(Provide color chip for matching)
4. OPtiOnS
FS1 (Single fuse holder (120/277/347V), specify voltage.
Fuse by others)
FS2 (Double fuse holder (208/240/480V), specify voltage.
Fuse by others)
ASY (Asymmetric distribution-field installed)
HSS45 (Semi-cutoff house side shield provides cutoff at 1.5
mounting height - field installed)
HSS90 (House side shield full cutoff at pole-field installed)
480V (480V ballast. Not available for 150PSMH)
347V (347V ballast 120/277/347V)
LXN-RL (Lexan rectilinear)
TEN (2 3⁄8"/61mm O.D. x 4"/100mm long tenon. Required for
AAL pole)
SPECifiCatiOnS
FiXTurE suPPorT assEmbLY
Fixture shall be supported by a cast aluminum
base plate and slipfitter assembly. For fixtures
utilizing 150PSMH and 150HPS and below, the
standard slipfitter size shall be 4"/100mm square
for RL and 4"/100mm o.d. for the CY. For fixtures
utilizing 250PSMH and 200HPS and above, the
standard slipfitter size shall be 5"/127mm square
for the RL and 5"/127mm o.d. for the CY. Slipfitter
shall accommodate a 2 3⁄8"/61mm o.d.
x 4"/100mm high pole tenon assembly.
LuminairE HousinG
Upper housing assembly shall be constructed
from fabricated aluminum for the RL - rectilinear
luminaire and spun aluminum for the CY -
cylindrical luminaire. Upper housing shall be
supported by internal brackets with no structural
stress on the lens. Removable aluminum top
cover shall be gasketed and secured by means
of stainless steel fasteners. Lens shall be a onepiece,
injection molded, UV resistant clear acrylic
ELECTriCaL
Fixture shall be U.L. listed and CSA approved for
use in outdoor wet locations. Ballast shall be high
power factor multi-tap style (120/208/240/277V).
Note: All ballasts are factory prewired per
customer’s request.
oPTiCaL sYsTEm
Optical system shall consist of the patented
Pericline reflector assembly, a sharp cutoff dual
reflector system consisting of collecting and
distributing reflectors designed to provide sharp
cutoff at 76°. The optical system shall be capable
of producing maximum light intensities which
strike the ground at approximately 2-3/4 times
the luminaire mounting height. Reflectors shall be
spun aluminum with specular Alzak ® finish.
Job
TYPE
noTEs
PER-S
See next page
| 1 |

PER-S – Classic Pericline Small Scale
DIMENSIONS DIMENSIONS
FinisH
SMALL PERICLINE SMALL PERICLINE
DimEnSiOnS Photometric Report
Fixture finish consists of a five stage pretreatment regimen Cylindrical Cylindrical
CATALOG NUMBER:
Cylindrical
with a polymer primer sealer, oven dry off, and top coated
with a thermoset super TGIC polyester powder coat
finish. The finish shall meet the AAMA 605.2 performance
specification which includes passing a 3000 hour salt
spray test for corrosion resistance.
Rectilinear
12" Sq.
12" Sq.
305mm 305mm
Rectilinear
Rectilinear Wednesday, July 11, 2012
12" Sq.
305mm
25.5" 25 1/2"
Wednesday, July 648mm
648mm 11, 2012
CErTiFiCaTion
All electrical components and materials shall be U.L.
recognized. Fixtures shall be listed with U.L. laboratories
for wet location use.
warranTY
Fixture is warranted for three years. Ballast components
carry the ballast manufacturer’s limited warranty. Any
unauthorized return, repair, replacement or modification
of the Product(s) shall void this warranty. This warranty
applies only to the use of the Product(s) as intended by
AAL and does not cover any misapplication or misuse of
said Product(s), or installation in hazardous or corrosive
environments. Contact AAL for complete warranty
language, exceptions, and limitations.
AAL reserves the right to change product specifications without notice.
42 7/16"
1078mm
42 7/16"
1078mm
ARCHITECTURAL AREA LIGHTING
16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.aal.net
Copyright © 2012 | REV 6.12
PT2
PT2
TYPE
FILENAME: PER-SRL.IES
14"/356mm Diameter 14"/356mm 14"/356mm Diameter
TEST #D1087A CATALOG MOLDCAST NUMBER: 71113(PERICLINE)
24"/609mmPhotometric
24"/609mm
Report
SMALL RECTILINEAR PERICLINE : SPEC REFLECTOR, CLEAR ACRYLIC
LAMP: ( 1) M-250/U--VERT FILENAME: PER-SRL.IES
@ 20500.00 LMS. EA.
BALLAST: STD 295W. B.F.= 1.00
TEST #D1087A MOLDCAST 21" 71113(PERICLINE) 21"
SMALL RECTILINEAR 28" 28" PERICLINE 533mm 28" : SPEC 5331mm 533mm REFLECTOR, 29" CLEAR 29" 29" ACRYLIC
SUMMARY DATA LAMP: 711mm ( 1) M-250/U--VERT 711mm
711mm@
20500.00 LMS. EA. 736mm
736mm
736mm
BALLAST: STD 295W. B.F.= 1.00
EFFICIENCY
( Total)
:
43.
4 %
EFFICIENCY (Down SUMMARY / Up): DATA
4"/100mm O.D.
4"/102mm 41.7 o.d. % / 1.7 4"/102mm % o.d.
EFFICIENCY (Street / House):
or
or 5"/127mm 22.2 o.d. % / 21.2
5"/127mm or 5"/127mm % o.d.
EFFICIENCY
( Total)
:
43.
4 % O.D.
ROADWAY CLASSIFICATION: TYPE IV, VERY SHORT
EFFICIENCY (Down / Up): 41.7 % / 1.7 % WMA
CUTOFF CLASSIFICATION: CUTOFF
EFFICIENCY (Street / House): 17" 22.2 % / 21.2 17" 17" %
LUMENS/
LAMP:
20500
ROADWAY CLASSIFICATION: 432mm
432mmTYPE
IV, VERY 432mmSHORT
NO.
OF
LAMPS:
CUTOFF CLASSIFICATION: 1 CUTOFF
LUMINOUS OPENING: LUMENS/
LAMP:
RECTANGULAR 20500
WiNd
Ot
h.
: OF
LAMPS:
0.
95
( Feet)
1
Length: LUMINOUS OPENING: 0.95 RECTANGULAR
Height: Width:
35" 0.83
28.25" 35" 0.
95
( Feet)
Length: 717mm
INPUT
WATTS:
889mm 295
889mm 0.95
Height: 37"
37"
0.83
INPUT
WATTS:
940mm
940mm
940mm 295
28" 28"
711mm
WMA
21" 21"
21"
28"
5331mm 533mm
533mm 29" 29"
711mm
736mm 737mm
4"/102mm 4"/100mm o.d. O.D. 4"/102mm o.d.
or 5"/127mm or or 5"/127mm
5"/127mm O.D.
17"
17"
432mm 432mm
432mm
37"
37"
940mm
940mm
35"
35"
899mm
899mm
CATALOG NUMBER:
FILENAME: PER-SRL-H.IES
b2 u3 G2
PT2 PT2
FORWARD LIGHT LUMEN
FL 30
PT2 PT2
uplight 3.7%
Downlight 96.3%
20' mounting height
o 1.5% 251
o
FM 60 8.1% 1337
FH 80 o 12.7% 2114
o
FVH 90 0.2% 29
BACK LIGHT
BL 30 o 0.9% 150
o
BM 60 5.3% 887
BH 80 o 5.6% 930
o
BVH 90 0.1% 23
UPLIGHT
UL 100 o 0.01
0.01
0.02
0.02
0.05
0.05
0.5
0.1 0.5 1.
0.1 0.2
Reported data calculated from manufacturer's data file, based on IESNA recommended methods.
1.
0.2
Photometric Viewer v3.4
2.
Reported data calculated from manufacturer's data file, based on IESNA recommended methods. 2.
Photometric Viewer v3.4
Mounting
Height Multiplier
----------- --------------
----------- --------------
10 4.000
10 15 1.778 4.000
15 20 1.000 1.778
20 25 0.640 1.000
25 30 0.444 0.640
30 35 0.327 0.444
35 40 0.250 0.327
40 45 0.198 0.250
50 0.160
45 0.198
50 0.160
UH
o
180
0.3%
1.0%
52
166
+ = Point of max candela
Mounting Height = 20 Feet. Each box represents one mounting height.
+ = Point of max candela
Mounting Height = 20 Feet. Each box represents one mounting height.
IES files can be found at www.aal.net
Photometric Report
42 1/2"
1078mm
42 1/2"
1078mm
29"
737mm
Wednesday, July 11, 2012
PT2 PT2
Note: For fixtures Note: utilizing For fixtures 175MH utilizing and 150 175MH HPS and below, 150 HPS the and standard below, slipfitter the standard size shall slipfitter be 4" size square shall for be RL 4" and square 4” o.d. for RL for the and CY. 4” o.d. for the CY.
For fixtures utilizing For fixtures 250MH utilizing and 200 250MH HPS and above, 200 HPS the and standard above, slipfitter the standard size shall slipfitter be 5" size square shall for be the 5" RL square and 5" for o.d. the RL for the and CY. 5" o.d. for the CY.
MEDIUM PERICLINE MEDIUM PERICLINE
b3 u3 G2
Cylindrical Cylindrical Rectilinear Rectilinear
FORWARD LIGHT LUMEN
16" Square 16" Square
406mm
406mm
FL 30
19"/482mm Diameter 19"/482mm Diameter
28"
28"
28"
28"
42 7/16"
42 7/16"
42 7/16"
42 7/16"
711
711
711mm
711mm
1078mm
1078mm
1078mm
1078mm
5"/127mm o.d. 5"/127mm o.d.
uplight 5"/127mm o.d. 3.9% 5"/127mm o.d.
Downlight 96.7%
23 1/2"
23 1/2 "
23 1/2"
23 1/2 "
597mm
597mm
597mm
597mm
20' mounting height
o 1.9% 397
o
FM 60 6.7% 1377
FH 80 o 12.5% 2553
o
FVH 90 0.2% 43
BACK LIGHT
BL 30 o 1.7% 352
o
BM 60 6.7% 1368
BH 80 o 11.8% 2418
o
BVH 90 0.2% 42
UPLIGHT
UL 100 o TEST #E1218A CATALOG MOLDCAST NUMBER: 71112-C45(PERICLINE)
Wednesday, July 11, 2012
SMALL RECTILINEAR PERICLINE : HOUSE SIDE CUTOFF SPEC REFL
LAMP: ( 1) M-175/U--VERT FILENAME: PER-SRL-H.IES
@ 16600.00 LMS. EA.
BALLAST: STD 215W. B.F.= 1.00
TEST #E1218A MOLDCAST 71112-C45(PERICLINE)
SMALL RECTILINEAR PERICLINE PERS : SRL HOUSE SIDE CUTOFF SPEC WATTAGE: REFL 295 LUMEN OUTPUT: 8903 EFFICACY: 69.5
SUMMARY DATA
ISO-ILLUMINANCE DIAGRAM (fc)
LAMP: ( 1) M-175/U--VERT @ 16600.00 LMS. EA.
ISO-ILLUMINANCE DIAGRAM (fc)
BALLAST: STD 215W. B.F.= 1.00
EFFICIENCY
( Total)
:
35.
8 %
Mounting
EFFICIENCY (Down
Height Multiplier
SUMMARY / Up): DATA
34.5 % / 1.3 %
Height Multiplier
----------- --------------
EFFICIENCY (Street / House): 23.3 % / 12.5 %
-----------
10
--------------
4.000
ROADWAY CLASSIFICATION: EFFICIENCY
( Total)
: TYPE III, VERY 35.
8 SHORT %
10
0.5
15 1.778 4.000
CUTOFF CLASSIFICATION: EFFICIENCY (Down / Up): CUTOFF 34.5 % / 1.3 %
0.5
15 20 1.000 1.778
LUMENS/
LAMP:
EFFICIENCY (Street / House):
16600
23.3 % / 12.5 %
20 25 0.640 1.000
ROADWAY CLASSIFICATION: TYPE III, VERY SHORT
NO.
OF
LAMPS:
1
25 30 0.444
CUTOFF CLASSIFICATION: CUTOFF
0.640
0.01
LUMINOUS OPENING: 1.
30 35 0.327
LUMENS/
LAMP:
RECTANGULAR 16600
0.444
Wi
2.
0.01
0.02 40 0.250
Nd
Ot
h.
: OF
LAMPS:
0.
95
( Feet)
1
1.
35 0.327
Length: 45 0.198
LUMINOUS OPENING: 0.95 RECTANGULAR
2.
0.02 40 0.250
50 0.160
Height: Width:
0.83 0.
95
( Feet)
45 0.198
INPUT
WATTS:
Length: 215
0.95
50 0.160
Height: 0.83
0.05
INPUT
WATTS:
215
0.05
0.1 0.2
0.4% 85
0.1 0.2
+ = Point of max candela
o Mounting Height = 20 Feet. Each box represents one mounting height.
UH 180 1.3% 265
+ = Point of max candela
Mounting Height = 20 Feet. Each box represents one mounting height.
PERS SRL H WATTAGE: ISO-ILLUMINANCE 215 LUMEN DIAGRAM DIAGRAM OUTPUT: (fc) (fc) 5939 EFFICACY: 77.2
Reported data calculated from manufacturer's data file, based on IESNA recommended methods.
Photometric Viewer v3.4
Photometric Report
| 2 |
WMA
25 1/2"
648mm