Aalco Stainless Steel Handrail Systems - BD Online Product Search

Uniclass 

L 4421 

Cl/SfB 

(34) X 

Glass Clamps 

Fittings 

Mountings 

End Caps 

Handrail Brackets 

Slotted Tube System 

Accessories 

Da Vinci Clamp System 

GLASS U 

Woodinox 

Rope System 

Mirror Polished System 

For more information go to www.barbourproductsearch.info 

Stainless 

Handrail 

Systems 

www.aalco.co.uk 

1


ALL ITEMS HELD IN AALCO UK STOCK 

2 www.aalco.co.uk 

Aalco has recently extended the 

stock of Stainless Steel architectural 

products to include additional sizes 

of handrail tube as shown in the 

table below plus a complete range 

of handrail fittings. 

If you cannot find what you are 

looking for please contact your local 

Aalco Service Centre as detailed on 

the back cover. We can also arrange 

bespoke designs with CAD drawings, 

including spiral staircase elements. 

THE RANGE 

Handrail Tube 

Aalco stocks the following items with 

a satin 240 Grit or 320 Grit polished O/D. 

Also see the Slotted Tube on page 12. 

Grade 304 (1.4301) 

O/D Wall 

42.4 mm 2.0 mm 

42.4 mm 2.5 mm 

48.3 mm 2.0 mm 

48.3 mm 2.5 mm 

320 Grit Satin Polished Bar 

Grade 304 Diameter 

304 (1.4301) 12 mm 

316 (1.4404) 12 mm 

Grade 316 (1.4404) 

O/D Wall 

42.4 mm 2.0 mm 

42.4 mm 2.5 mm 

48.3 mm 2.0 mm 

48.3 mm 2.5 mm 

Aalco stocks the following items in 3 meters. 

Issue Number 5 - February 2011 

The information contained herein is based on our present knowledge 

and experience and is given in good faith. However, no liability will be 

accepted by the Company in respect of any action taken by any third 

party in reliance thereon. 

As the products detailed herein may be used for a wide variety of 

purposes and as the Company has no control over their use, the 

Company specifically excludes all conditions or warranties expressed or 

implied by statute or otherwise as to dimensions, properties and/or their 

fitness for any particular purpose. Any advice given by the Company to 

any third party is given for that party’s assistance only and without any 

liability on the part of the Company. 

Any contract between the Company and a customer will be subject 

to the Company’s Conditions of Sale. The extent of the Company’s 

liabilities to any customer is clearly set out in those Conditions; a copy 

of which is available on request.

For: 8 & 10 mm glass thickness 

Part no. Application Grade Dimension 

E009 For tube Ø A 42.4 mm AISI 316 43 x 64 mm 


For: 8 & 10 mm glass thickness 


E0091 Flat back AISI 316 43 x 60 mm 

For: 10.76 and 12.76 glass thickness 


For: 10 and 12 glass thickness 

For: 10 and 12 glass thickness 


GLASS CLAMPS 



For: 12.76 mm glass thickness 








Ø 9 

21.5 21.5 

43 

Ø 9 

21.5 21.5 

43 

Ø 9 

27 27 

54 

Ø9 

27 27 

54 

Ø 9 

26.5 26.5 

53 

Ø9 

26.5 26.5 

53 

30.5 

16 

30.5 

16 

31 

16 

31 

16 

16 27 

16 27 

Ø A 

33 

Ø A 

28 

28 

Ø A 

32 

32 

33 

Ø 7 

Ø 6 

59 

Ø6 

59 

60 

Ø7 

Ø 6 

53 

Ø6 

53 

60 


3

ØA 


C 

B 


FITTINGS 

38.4 

ØA 

B 

ØA 

ØA 

B 

ØA 

B 

B 

B 

C 

B 

B 

ADJUSTABLE ELBOW 

Part no. Application Grade Dimensions 

E446 For tube Ø 42.4 x 2.0 mm AISI 316 B = 27.5 mm C = 26 mm 

E4462 For tube Ø 48.3 x 2.0 mm AISI 316 B = 31.5 mm C = 28 mm 

90° DEGREE ELBOW 


E451 For tube Ø A 42.4 x 2.0 mm AISI 316 B = 65 mm 

E451/26 For tube Ø A 42.4 x 2.5 mm AISI 316 B = 65 mm 









90° DEGREE CURVED ELBOW 





E2002/26 For tube Ø A 48.3 x 2.5 mm AISI 316 B = 73 mm

Fittings 

90° FLAT END 


E452 For tube Ø 42.4 x 2.0 mm AISI 316 B = 65 mm 

E45210 For tube Ø 48.3 x 2.0 mm AISI 316 B = 65 mm 

90° ROUNDED END 


E481 For tube Ø 42.4 x 2.0 mm AISI 316 80 x 60 mm 

E482 For tube Ø 48.3 x 2.0 mm AISI 316 80 x 60 MM 


Ø A 

Ø A 

C 

B 

Fittings 

www.aalco.co.uk 5

Fittings 



Ø A 

Ø 22 

Ø A 

R21.2 

B 

ØA 

L 

4 

30.5 

20.5 

14.2 

ØA 

ARTICULATED ELBOW 

Part no. Application Grade 

E4471 For tube Ø 42.4 x 2.0 mm AISI 316 

E4471/26 For tube Ø 42.4 x 2.5 mm AISI 316 


E4472/26 For tube Ø 48.3 x 2.5 mm AISI 316 

3-WAY CONNECTING TEE 






INTERNAL CONNECTOR 

Part no. Application Grade L 

E455 For tube Ø A 42.4 x 2.0 mm AISI 316 54 mm 

E455/26 For tube Ø A 42.4 x 2.5 mm AISI 316 54 mm 



CROSSBAR HOLDER, INTERMEDIATE 

Part no. Application Grade Hole Dimensions 

E4041 For tube Ø 48.3 mm AISI 316 12.2 mm Ø 22 x 30.5 mm 

E4044 Flat back AISI 316 12.2 mm Ø 22 x 30.5 mm

4-WAY CORNER CONNECTOR 






CROSS CONNECTOR 






3-WAY CORNER CONNECTOR 






ADAPTOR 


Part no. Application Grade H 


E454/26 For tube Ø A 42.4 x 2.5 mm AISI 316 6.5 mm 



H 

B 

Ø A 

Ø A 

B 

Ø A 

B 

Ø A 

Ø A 

Ø A 

Ø A 

B 

B 

Fittings 


7


180 

11.5 157 11.5 

6 

C 

11 


MOUNTINGS 

6 

Ø 11 

120° 

68 

90 

12.5 

Ø 8.5 

Ø100 

ØA 

Ø B 

Ø A 

Ø100 

Ø75 

11 

Ø A 

120° 

10 

16 30 

Ø9 

B 

FLOOR BASE 


E403 For tube Ø A 42.4 x 2.0 mm AISI 316 Ø 100 x 6 mm 

E403/26 For tube Ø A 42.4 x 2.5 mm AISI 316 Ø 100 x 6 mm 



WALL FLANGE 

DISC COUNTERSUNK HOLES AND CHAMFERED PERIMETER 

Part no. Dimensions Grade External holes Central hole 

E0700316 Ø 100 x 6 mm AISI 316 3 x Ø 9 mm Ø 13 mm 

Part no. Application Grade Dimensions holes 

E456 For tube Ø A 42.4 x 2.0 and 2.5 mm AISI 316 B = Ø 84 mm C = 25 mm 

E2067 For tube Ø A 48.3 x 2.0 and 2.5 mm AISI 316 B = Ø 94 mm C = 28 mm 

Ø A 

130 

31 

SIDE MOUNTING BASE 


E406 For tube Ø A 42.4 x 2.0 mm AISI 316 180 x 90 mm 

E406/26 For tube Ø A 42.4 x 2.5 mm AISI 316 180 x 90 mm 

E407 For tube Ø A 48.3 x 2.0 mm AISI 316 180 x 90 mm 

E407/26 For tube Ø A 48.3 x 2.5 mm AISI 316 180 x 90 mm

COVER PLATE 

Mountings 

Part no. Hole Height Grade Dimensions 

E4072/C F = Ø 43 mm H = 25 mm AISI 316 A = Ø 105 mm 

E4073/I F = Ø 49 mm H = 25 mm AISI 316 A = Ø 105 mm 

FLOOR BASE (OUTDOOR USE) 







99.5 

21 

10.5 

115 

22 93 

15 

2x45° 

9.5 

Ø A 

5 

Ø F 

120° 

21 

ØA 

E40320 

11 

58 

7.5 107.5 

78.5 

H 

Mountings 

www.aalco.co.uk 9



END CAPS 

Ø A 

Ø A 

Ø A 

Ø A 

B 

H 

1.5 

END CAPS 

Part no. Application Grade Tube thck. 

E4090 For tube Ø A 42.4 x 2.0 and 2.5 mm AISI 316 B = 2.0 - 2.5 mm 

E4091 For tube Ø A 48.3 x 2.0 and 2.5 mm AISI 316 B = 2.0 - 2.5 mm 

END CAPS 


E01151 For tube Ø A 42.4 x 2.0 mm AISI 303 Ø 42.4 x 6.5 mm 

E01151/26 For tube Ø A 42.4 x 2.5 mm AISI 303 Ø 42.4 x 6.5 mm 

E01152 For tube Ø A 48.3 x 2.0 mm AISI 303 Ø 48.3 x 6.5 mm 

E01152/26 For tube Ø A 48.3 x 2.5 mm AISI 303 Ø 48.3 x 6.5 mm 

END CAPS 

Part no. Application Grade Height 



END CAPS 


E465 For tube Ø A 42.4 x 2,0 mm AISI 316 

E465/26 For tube Ø A 42.4 x 2.5 mm AISI 316 

E466 For tube Ø A 48.3 x 2.0 mm AISI 316 

E466/26 For tube Ø A 48.3 x 2.5 mm AISI 316

HANDRAIL HOLDER ADJUSTABLE 


E030/S316 For tube Ø A 42.4 x 2.0 mm AISI 316 75 mm 

E030/S316/26 For tube Ø A 42.4 x 2.5 mm AISI 316 75 mm 



HANDRAIL HOLDER RIGID 


E031/S1316 For tube Ø A 42.4 x 2.0 mm AISI 316 75 mm 

E031/S316/26 For tube Ø A 42.4 x 2.5 mm AISI 316 75 mm 



WALL SUPPORT 


E02230 For tube Ø 42.4 mm AISI 303 



HANDRAIL BRACKET 

Ø 6.5 

H 

10.5 

11 

64 

42 11 

46 

H 

10.5 

Ø 70 

Ø A 

6 

27 

Ø A 

85 

Ø 12 

Ø 12 

Ø 

Ø 12 

93 

64.5 

www.aalco.co.uk 11



SLOTTED TUBE SYSTEM 

80 

Ø 

50 

80 

50 

25 

34 

Ø 

66 

30 6 30 

50 

50 

80 

Ø 

80 

Ø 

Ø 

25 

Ø 

Ø 

RUBBER INSERT 

SLOTTED TUBE 


E1000424 Tube Ø 42.4 x 1.5 x 6000 mm AISI 304 




CONNECTOR 


E1200100 Tube Ø 42.4 x 1.5 mm AISI 316 

E1200110 Tube Ø 48.3 x 1.5 mm AISI 316 

90 DEGREE ANGLE - HORIZONTAL 




90 DEGREE ANGLE - VERTICAL 




END CAPS 




Tube Size Part no. Application Coil length Grade 

Ø 42.2 E1999100 Glass 8 - 10.76 mm 30 mt. RUBBER 

Ø 42.2 E1999200 Glass 12 - 16.76 mm 30 mt. RUBBER 

Ø 42.2 E1999300 Glass 16.76 - 18 mm 30 mt. RUBBER 

Ø 48.3 E1999400 Glass 8 - 13 mm 30 mt. RUBBER 

Ø 48.3 E1999500 Glass 14 - 18 mm 30 mt. RUBBER 

Ø 48.3 E1999650 Glass 18 - 21.5 mm 30 mt. RUBBER


ACCESSORIES 

DEGREASING SPRAY 

Part no. Application Dims. 

E4051 Cleaning spray 500 ml 

Spray for cleaning all metal surfaces to be glued 

PROTECTION SPRAY 


E4052 Protection spray 500 ml 

Leaves a thin antistatic and water-repellent coat on 

the treated metallic surfaces. It is recommended on 

finished products. 

STAINLESS STEEL ADHESIVE 


E4054 High gluing adhesive 50 ml 

Consumption per bonding ca. 1 ml 

Ø (mm) 42.4 48.3 

Glueing connections per 1 bottle (50 ml) 60 50 

NNOSOFT & INNOPROTECT 

Part no. Quantity 

Innosoft 500, 250 & 100 ml bottle 

Innoprotect 500, 250 & 100 ml bottle 

Application Sponge 1 

Cleaning Kit to remove oxides, rust contamination and stains 

from stainless steel surfaces then passivate. 


13


STOCK HELD IN ITALY 


B 

B 

ØA 

ØA 

FITTINGS 

B 

B 




90° DEGREE CURVED ELBOW 

All the items on pages 2 to 13 

of this catalogue are available 

from Aalco’s UK stocks. Items on 

the following pages are available 

from the stocks held by the 

manufacturer in Italy and can 

be supplied on short lead times. 

Many other items are also 

available as are items designed 

to customers own drawings and 

specifications - Please contact 

your local service centre with 

your enquiries. 


E450/304 For tube Ø A 42.4 x 2.0 mm AISI 304 B = 65 mm

90° FLAT END 

Part no. Application Grade Dimension B 

E452 For tube Ø 42.4 x 2.0 mm AISI 316 55mm 

90° ROUNDED END 


E481 For tube Ø 42.4 x 2.0 mm AISI 316 80 x 60 mm 

CROSSBAR HOLDER, INTERMEDIATE 

FLOOR BASE 



WALL FLANGE 


Part no. Application Grade Hole Dimensions 

E4042 For tube Ø 42.4 mm AISI 316 12.2 mm Ø 22 x 30.5 mm 

Part no. Application Grade Dimensions holes 

E456 For tube Ø A 42.4 x 2.0 mm AISI 316 B = Ø 84 mm 

E2067 For tube Ø A 48.3 x 2.0 mm AISI 316 B = Ø 94 mm 

Ø A 

Ø 22 

Ø A 

C 

B 

C 

R21.2 

30.5 

20.5 

120° 

Ø B 

Ø A 

B 

14.2 

120° 

Fittings 


15


Ø B 

Ø B 

87 

31 


MOUNTINGS 

ØA 

10 

49.35 

C 

C 

Ø A 

Ø A 

D 

D 

Ø11 

M 8 

Ø A 

Ø80 

E40350 

H 

37.5 37.5 10 

Ø110 

10 

ELBOW WITH FLANGE 

SIDE MOUNTED BASE 




Fittings suitable for tube with wall thickness 2.5mm will be available shortly. 

Part no. Application Grade Dimensions Dimensions Dimensions 

E4566 For tube Ø A 42.4 x 2.0 mm AISI 316 B = Ø 84 mm C = 80 mm C = 65 mm 


ELBOW WITH FLANGE 

Part no. Application Grade Dimensions Dimensions Dimensions 



END CAPS 

END CAPS 





E4131/26 For tube Ø A 48.3 x 2.5 mm AISI 316 9 mm

120° 


HANDRAIL BRACKET 

120° 

Ø 40 

47 

Ø 4.5 

47.5 

120° 

120° 

Ø63 

Ø 63 

Ø6.5 

Ø 5.5 

64 

E015 E018 

8 

83.5 

Ø 42.4 

77.5 

Ø 33.7 - 42.4 

Ø20 

86.7 

WALL SUPPORT 



HANDRAIL HOLDER 


E022/S316 For tube Ø 33.7 - 42.4 mm AISI 316 

www.aalco.co.uk 17

Handrail Bracket 


C 

58 

12 


Ø 42.4 

Ø A 

27 64 

Ø A 

Ø 42.4 

Ø 42.4 

Ø 20 

H 

H 

Ø B 

11 

64 

42 11 

Ø A 

11 

64 

42 11 

Ø A 

64 

Ø 6.5 

Ø 6.5 

3 PIECES COMPLETE WITH SCREW AND END CAP FOR TUBE 

Part no. Grade For tube A B C 

E0104 AISI 303 Ø A 42.4 x 2.0 mm Ø 20 mm 58 mm 


Fittings suitable for tube diameter 48.3 will be available shortly. 

2 PIECES COMPLETE WITH END CAP FOR TUBE 

Part no. Grade For tube A B C 





Part no. Grade Height H For tube A 

E040300 AISI 303 74 mm Ø A 42.4 x 2.0 mm 

E040310 AISI 316 74 mm Ø A 42.4 x 2.0 mm 




E040500 AISI 303 74 mm Ø A 42.4 x 2.0 mm 

E040510 AISI 316 74 mm Ø A 42.4 x 2.0 mm 

Fittings suitable for tube diameter 48.3 will be available shortly.



E040700 AISI 303 74 mm Ø A 42.4 x 2.0 mm 

E040710 AISI 316 74 mm Ø A 42.4 x 2.0 mm 




E040900 AISI 303 74 mm Ø A 42.4 x 2.0 mm 

E040910 AISI 316 74 mm Ø A 42.4 x 2.0 mm 




E041100 AISI 303 74 mm Ø A 42.4 x 2.0 mm 

E041110 AISI 316 74 mm Ø A 42.4 x 2.0 mm 




E041300 AISI 303 74 mm Ø A 42.4 x 2.0 mm 

E041310 AISI 316 74 mm Ø A 42.4 x 2.0 mm 



H 

Ø 42.4 

Ø 42.4 

Ø 42.4 

Ø 42.4 

H 

H 

H 

11 

64 

42 11 

Ø A 

11 

64 

42 11 

Ø A 

64 

11 42 11 

Ø A 

11 

64 

42 11 

Ø A 

Ø 6.5 

Ø 6.5 

Ø 6.5 

Ø 6.5 

Handrail Bracket 


19


E00842 E00842 

E00843 E00843 

MODELLO REGISTRATO REGISTERED DESIGN 

patented 

E00840/C E00840/C 

Ø 30 

Ø 30 


DA VINCI CLAMP SYSTEMS 

58 

1 GLASS CLAMP 

8 WAYS TO USE IT 

THE INTERCHANGEABLE CLAMP CAN BE USED 

WITH ALMOST ANY TUBE! 

USE OF THE CLAMP TOGETHER WITH THE CLOSURE 

PROVIDES LATERAL LOCKING THUS TRANSFORMING 

TO A SINGLE GLASS SUPPORT 

THE MOVABLE CLAMP PERMITS ROTATION 

OF THE GLASS AROUND MOUNTED POST 

5 

10 

60 

20.5 

Ø A 

DA VINCI 

CLAMP SYSTEM 

30 

Ø 30 

Ø 30 

R30 

5 

10 

22 

A 

29 

ROUND CLAMPS 

• EASY TO INSTALL • ECONOMICAL • SAFE 

Ø A 

Part no. Dimensions Grade Glass thickness 

E00840 Ø 60 mm AISI 316 A = Ø 8 mm 

ADAPTER FOR ROUND CLAMPS 

Part no. Grade Application 

E00842 AISI 316 For tube Ø A 42.4 mm 

E00843 AISI 316 For tube Ø A 48.3 mm 

E00844 AISI 316 Flat back 

STAINLESS STEEL CLOSURE FOR ROUND CLAMPS 

Part no. Grade 

E00840/C AISI 316 

RUBBER FOR ROUND CLASS CLAMPS 

Part no. Grade No. of pieces in set Glass 

E00840/R1 RUBBER 2 8.76 mm 

E00840/R2 RUBBER 2 10 mm 

E00840/R3 RUBBER 2 10.76 mm 

E00840/R4 RUBBER 2 12 mm 

E00840/R5 RUBBER 2 12.76 mm


GLASS U 

GLASS U is a new concept for glass railing. It is extremely easy and fast to install, since it was 

conceived expressly for installer. This system does not require the use of concrete during 

installation. The system allows for easy replacement of glass. 

Floor Fixing Channel End Accessories 

3000 

Part no. Description Grade 

E1600100 


E1600500 Aluminium 

Aluminium support for 

floor anchorage 

Wall Fixing Channel End Accessories 

3000 


E1700200 


Aluminium support for 

floor anchorage 


Aluminium 

Aluminium 


TUV Tested 



to 200kg/m 


3000 


E1700300 



Carter to cover the holes 

of the glass anchorage 

E1700200 



Aluminium 


21



GLASS U EXTRA STRONG 

When a space is very crowded it is correct to be even more secure. That’s why we created 

Glass U Extra Strong 3 kN, is ideal for museums, stadiums, airports AND SO ON. 

A profile that resists up to a 300kg horizontal force, as directed by the most strigent European laws. 



20 

80 

2500 

Mounting profile, side mount 


E1800200 Galvanized Iron 

170 


100 

M12 

Ø 15 

50 


Ø 17 

M12 

TUV Tested 

250 

120 

to 300kg/m 

M12 

50 

Ø 15 

37 

150 

150 

75 75 

125 

200 

50 

Ø 26 

Ø 13 

200 

74 

50 

Ø 13 

M12 

20 

25 150 25 

100 100 

75 

75 

120 

25 

15 

Ø 15 

170 

2500 

250 

A full copy 

of the TUV 

test report is 

available for 

download at 




125 

100 

30 40 

30 



140 

15 

200

3000 

2500 

1 

2 

3 


GLASS U & GLASS U EXTRA STRONG 

36 

5 

84 

95 

95 

2 

2 

36 

A 

36 

150 

8.5 

3.64 

INSERT ThE GLASS IN ThE cLOSING 

dEvIcE ANd LAy EvERyThING IN 

ThE ALUMINIUM PROfILE 

MOvE ThE GLASS TO ONE SIdE ANd 

INSERT wEdGES IN ThE OPPOSITE 

SIdE Of ThE GLASS 

10.44 

fIX ThE GLASS PUTTING wEdGES IN 

ThE OThER SIdE Of ThE GLASS APPLyING 

A SLIGhT PRESSURE 

8.5 

55 

55 

100 

cLOSING dEvIcES fOR GLASS U 

Rubber gaskets to be used with items 

E1600100 and E1700100 

Part no. Grade Glass thickness A 

E1999800 RUBBER 16.76 - 17.52 mm 

E1999810 RUBBER 20.76 - 17.52 mm 

cLOSING dEvIcES fOR GLASS U EXTRA STRONG 

150 

Rubber gaskets to be used with item E1800100 

Part no. Grade Glass thickness 

E1800600 RUBBER 26.5 - 27 mm 

E1800700 RUBBER 30.5 - 31 mm 

fixing wedges are made of synthetic material 

cLOSING dEvIcES fOR GLASS U 


E1999830 RUBBER 

10.44 

PER VETRO 30.1/31 

10.44 

cLOSING dEvIcES fOR GLASS U EXTRA STRONG 

Part no. Grade Glass thickness 

E1800610 RUBBER 26.5 - 27 mm 

E1800710 RUBBER 30.5 - 31 mm 

cLOSING GASKET fOR GLASS U 

Part no. Grade Glass thickness coil length 

E1999850 RUBBER 16.76 - 17.52 mm 30 mt. 

E1999860 RUBBER 20.76 - 21.52 mm 30 mt. 

cLOSING GASKET fOR GLASS U EXTRA STRONG 

Part no. Grade Glass thickness coil length 

E1800620 RUBBER 26.5 - 27 mm 30 mt. 

E1800720 RUBBER 30.5 - 31 mm 30 mt. 

Examples of Applications 

www.aalco.co.uk 23

For more information go to www.barbourproductsearch.info


E604 Articulated angle connector AISI 304 


E605 Pivoting connector AISI 304 


E6070 Pivoting connector AISI 304 


45 mm 


E6080 Wall mounting Ø 45 mm hole AISI 304 

29 


E4265 Flat end terminal AISI 304 

35 


E4260 Rounded end terminal AISI 304 


E0224 Handrail support AISI 304 


E4586 Handrail support AISI 304 

Woodinox 

45 mm 

EINSM6X12 

84 mm 

ESM614 

Screw in nut + set screw 

M6 included with handrail 

support E4586 


25

Woodinox 




E600/T 

Plastic supports for 

end caps and fittings 

(screw included) 

E600/D 

Plastic 


E600/D 

Drill-gauge for 

wooden handrails 

E600/T 

E4265 

Aluminium 


E600/D1 

Drilling template for 

radial holes in wooden 

handrails Ø 45 mm 

Aluminium

The Wire Rope range provides 

an interesting and attractive 

alternative to systems based 

on tube or bar. 


ROPE SYSTEM 

Mirror Polished Stainless Steel Accessories 

Part no. Grade Dimensions Thread 

E012 AISI 303 Ø 60 mm M10 

E4300 AISI 316 Ø 60 mm M10 

E01201 AISI 303 Ø 55 mm M10 

E0120 AISI 316 Ø 50 mm M8 

E4301 AISI 316 Ø 50 mm M8 

E0121 AISI 303 Ø 40 mm M8 

E4302 AISI 316 Ø 40 mm M8 

E0122 AISI 303 Ø 30 mm M6 

E0123 AISI 303 Ø 25 mm M6 

E0124 AISI 303 Ø 20 mm M6 

E0125 AISI 303 Ø 15 mm M6 

Hole Ø 10.2 mm 

Part no. Grade Dimensions 

E0126 AISI 303 Ø 20 mm blind hole 


E01262 AISI 303 Ø 20 mm hole 














E0130/SO AISI 303 Ø 30 mm hole with screw set 









E01301/SO AISI 303 Ø 30 mm hole with screw set 

Part no. Grade Rope Min break load 

EF7X704 AISI 316 Ø 4 mm 9.00 kN 

EF7X705 AISI 316 Ø 5 mm 14.00 kN 

EF7X706 AISI 316 Ø 6 mm 20.00 kN 

Ø A 

Ø 12 

X 

7 

7 

7 

19 

Part no. Grade Rope Min break load 

EF7X1904 AISI 316 Ø 4 mm 8.50 kN 

EF7X1905 AISI 316 Ø 5 mm 14.00 kN 

EF7X1906 AISI 316 Ø 6 mm 20.00 kN 

Part no. Grade Rope X A 

EA04 AISI 303 Ø 4 mm M8 Ø 15 mm 

EA04316 AISI 316 Ø 4 mm M8 Ø 15 mm 

EA05 AISI 303 Ø 5-6 mm M10 Ø 20 mm 

EA05316 AISI 316 Ø 5-6 mm M10 Ø 20 mm 

Part no. Grade For Tube Hole 

EB06 AISI 303 Ø 33.7 mm Ø 6.5 mm 

EB06316 AISI 316 Ø 33.7 mm Ø 6.5 mm 

EB061 AISI 303 Ø 42.4 mm Ø 6.5 mm 

EB061316 AISI 316 Ø 42.4 mm Ø 6.5 mm 

EB063 AISI 303 Flat face Ø 6.5 mm 


EB07 AISI 303 Ø 33.7 mm Ø 8.5 mm 

EB07316 AISI 316 Ø 33.7 mm Ø 8.5 mm 

EB071 AISI 303 Ø 42.4 mm Ø 8.5 mm 

EB071316 AISI 316 Ø 42.4 mm Ø 8.5 mm 




27

Rope Rope System 

M6 

Part no. Grade Rope Y 

ETF04SX AISI 316 - left Ø 4 mm 60 mm 

ETF04DX AISI 316 - right Ø 4 mm 60 mm 





M6 

Part no. Grade Rope Y 

ETM04SX AISI 316 - left Ø 4 mm 60 mm 

ETM04DX AISI 316 - right Ø 4 mm 60 mm 





Part no. Grade Description 


ET06 AISI 316 


Y 

ED05 AISI 303 Adjustable ropes with 2 M6 thread 

ED05316 AISI 316 Adjustable ropes with 2 M6 thread 

Tightening connector with internal 

thread right/left M6 

ED06 AISI 316 Domed head nut right hand thread M6 

ED06SX AISI 316 Domed head nut left hand thread M6 



Y 

64 

16 4 

37 

37 

63 

Part no. Grade Rope A B 

ETFF04 AISI 316 Ø 4 mm 55 mm 48 mm 



48 

63 


ETMS06DX AISI 316 Right hand thread 

ETMS06SX AISI 316 Left hand thread 

70 

53 


ED07 AISI 316 Rounded head screw M6 thread right 

ED07SX AISI 316 Rounded head screw M6 thread left 

60 


ETFM06DX AISI 316 Right hand thread 

ETFM06SX AISI 316 Left hand thread 

Part no. Grade Rope 

ETFT04 AISI 316 Ø 4 mm 




ETMT06DX AISI 304 Right hand thread 

ETMT06SX AISI 304 Left hand thread 

A 

B

50 

72 

Part no. Grade Rope 

ETFS04 AISI 304 Ø 4 mm 



31 

Part no. Grade A 

ETTB04304 AISI 303 Ø 4 mm 






A 

Part no. Grade Thread A 

ETSM8 AISI 316 M6-M8 90 mm 



34 

Part no. Grade For tube Hole(B) Rope (B) 

ESF04 AISI 303 Ø 33.7 mm Ø 4.5 mm Ø 4 mm 












ESF043 AISI 303 Flat face Ø 4.5 mm Ø 4 mm 







Mirror Polished Stainless Steel Rope Accessories System 

Rope System 

22 

B 

34 

34 

EXAMPLE OF APPLICATION 

ED06 

ED07 

EB071 

ED06 

ED06 

ETTB05 

ETM05DX 

ETM05DX 

ETM05DX 

ETFM06DX 

ED05 

ETFT05 

B 

22 

B 

22 

Part no. Grade For tube Hole (B) Rope (B) 

ESF08 AISI 303 Ø 33.7 mm Ø 8 mm Ø 4-5-6 mm 




ESF083 AISI 303 Flat face Ø 8 mm Ø 4-5-6 mm 

ESF083316 AISI 316 Flat face Ø 8 mm Ø 4-5-6 mm 

Part no. Grade For tube Rope (B) 

EST04DX AISI 303 Ø 33.7 mm Ø 4-5-6 mm 


EST04SX AISI 303 Ø 33.7 mm Ø 4-5-6 mm 






EST043DX AISI 303 Flat face Ø 4-5-6 mm 

EST053DX AISI 316 Flat face Ø 4-5-6 mm 

EST043SX AISI 303 Flat face Ø 4-5-6 mm 

EST053SX AISI 316 Flat face Ø 4-5-6 mm 

ETM05DX ETF05DX 

ETM05SX ET06 

ED06 

EA05 EA05 

ETMT06DX 

ETFF04 

ETFF05 ETFT05 

ETM05DX 

E0124 

EST04DX 

ETM04DX 

ESF04 

ETM04SX 

EST04SX 

ED06SX 


29

MIRROR POLISHED TUBES 

Part no. Dimensions Grade Weight 

X4801 Ø 42.4 x 2.0 x 3000 mm AISI 316 6.07 kg 

X4801/6000 Ø 42.4 x 2.0 x 6000 mm AISI 316 12.14 kg 

MIRROR POLISHED ROUND BARS 

Part no. Dimensions Grade Weight 

X4851 Ø 12 x 3000 mm AISI 316 2.66 kg 

X4851/6000 Ø 12 x 6000 mm AISI 316 5.32 kg 


Ø B 

Part no. For tube Grade Round bar 

X40650 A = Ø 42.4 mm AISI 316 B = Ø 12.2 mm 

Part no. For tube Grade Round bar 

X0069991316 A = Ø 42.4 mm AISI 316 B = Ø 12.2 mm 


MIRROR POLISHED STAINLESS STEEL SYSTEM 

M6 

34 

18 

Ø A 

Ø A 

22−33 

30 

Ø B 

ROUND BAR HOLDERS 

Ø A 30.5 

Part no. For tube Grade Hole 

X0069 A = Ø 42.4 mm AISI 304 B = Ø 12.2 mm through 



Part no. For tube Grade Hole 




20.5 

Ø 22 

Ø B


Mirror Mirror Polished Polished Stainless Stainless Steel Steel Accessories System 

LATERAL ANCHORAGE FLANGE CANOPIES 

Part no. For tube Grade Disc 

X113316 A = Ø 42.4 x 2.0 mm AISI 316 Ø 100 x 6 mm 

PIVOTING ROUND BAR CONNECTOR LATERAL ANCHORAGE 

Part no. Grade For round bar 

X0070316 AISI 316 A = Ø 12 mm 

Part no. Grade For tube 

X456 AISI 316 A = 42.4 mm 

25 

100 

Ø A 

Ø A 

Ø 11 

120° 

35 

100 

125 

58 

15 15 

84 

Ø A 

120° 

Ø A 

Part no. Hole Grade Height 

X4072 F = Ø 43 mm AISI 316 H = 15 mm 

84 

Part no. For tube 

X4561 A = 42.4 x 2.0 mm 

ANCHORAGES FOR HANDRAILS LATERAL ANCHORAGE 

60 

Part no. For tube 

X4483 A = Ø 42.4 x 2.0 mm 

105 

Ø F 

82 

Ø A 

83 

Ø A 

H 

www.aalco.co.uk 31


Mirror Polished Stainless Steel System 

WALL HANDRAIL SUPPORT HANDRAIL SUPPORT 

Ø 6.5 

64 

11 42 11 

46 


Ø70 

Part no. For tube Grade 

X02231316 A = Ø 42.4 mm AISI 316 

Ø 6.5 

11 

64 

42 11 

46 

Ø 70 


X0223316 A = Ø 42.4 mm AISI 316 

6 

6 

73 

Ø12 

73 

Ø 12 

Ø 42.4 

Ø 42.4 

93 

93 

75 

10.5 

27 

Ø A 

Ø 12 


X031/S1316 A = Ø 42.4 x 2.0 mm AISI 316 

75 

10.5 

Ø A 

Ø 12 


X030/S316 A = Ø 42.4 x 2.0 mm AISI 316 

64.5

58 

12 


X0102316 A = Ø 42.4 x 2.0 mm AISI 316 

60 


X458 A = Ø 42.4 x 2.0 mm AISI 316 

6 


X454 A = Ø 42.4 x 2.0 mm AISI 316 

Ø A 

Ø A 



Ø A 

Ø A 

27 64 

Ø A 

Ø 20 

Ø 12 

75 

C 

Ø 42.4 

Ø A 

Ø B 


X0104316 A = Ø 42.4 x 2.0 mm AISI 316 

60 


X4581 A = Ø 42.4 x 2.0 mm AISI 316 

ØA 

22 


X468/424 A = Ø 42.4 x 2.0 mm AISI 316 

Ø A 

M6 

64 

80 

Ø A 

30 Ø 54 

M5 


33



D 


B 

B = glass thickness 8 - 8.76 and 10 mm 

Ø A 

B 

Part no. Dimensions For tube Grade 

X00950 C x D = 52 x 64 mm A = Ø 42.4 left mm AISI 316 

D 


X0092 C x D = 53 x 53 mm A = Ø 42.4 mm AISI 316 


X00931 C x D = 43 x 43 mm Flat back AISI 316 

GLASS CLAMP SUPPORT 


X00955 C x D = 52 x 64 mm A = Ø 42.4 right mm AISI 316 

B = glass thickness 8 and 10 mm B = glass thickness 8 - 8.76 and 10 mm 

DA VINCI CLAMP SYSTEM 

ROUND CLAMPS 

Part no. Dimensions Grade Glass thickness 

X00840 Ø 60 mm AISI 316 A = Ø 8 mm 

C 

C 

60 

D 

B 

Ø A 

30 

B 

D 

A 

29 








D 

D 




STAINLESS STEEL CLOSURE FOR ROUND CLAMPS 


X00840/C AISI 316 

C 

B 

Ø A 

C B 

B 


X0090 For tube Ø A 48.3 mm AISI 316 43 x 64 mm 

58 

20.5 

R30 

Ø A 

22

TUBE FITTINGS 



Ø A 

65 

22 

22 53 

Ø A 

65 

Ø A 

Ø A 

65 

65 

90° ELBOW 


X450 A = Ø 42.4 x 2.0 mm AISI 316 

90° ANGLE 


X451 A = Ø 42.4 x 2.0 mm AISI 316 

PIVOTING CONNECTOR 


X446 A = Ø 42.4 x 2.0 mm AISI 316 

ARTICULATED ELBOW 


X4471 A = Ø 42.4 x 2.0 mm AISI 316 


35



TUBE FITTINGS 

3 WAY FLUSH “T” 

SPHERES FINIALS 



X453 A = Ø 42.4 x 2.0 mm AISI 316 

PIVOTING CONNECTOR 

Ø A 

F 

Ø A 


X455 A = Ø 42.4 x 2.0 mm AISI 316 


X452 Ø A 42.4 x 2.0 mm AISI 316 

FINIALS 

Ø A 

Part no. Dimensions Hole Grade 

X4308 A = Ø 25 mm blind hole F = Ø 12.2 mm AISI 316 

X4309 A = Ø 25 mm blind hole F = Ø 14.2 mm le AISI 316 

X4311 A = Ø 25 mm hole F = Ø 12.2 mm AISI 316 

X4312 A = Ø 25 mm hole F = Ø 14.2 mm le AISI 316 

87 

Ø A 

Ø A 

M 

END CAPS 

HOLLOW SPHERES FINIALS 

Ø A 

Part. no. For tube Grade 

X465 Ø A 42.4 x 2.0 mm AISI 316 


X011316 Ø A 42.4 x 2.0 mm AISI 316 

Ø A 

Ø A 


X0119316 Ø A 42.4 x 2.0 mm AISI 316 

Ø A 


X01151316 Ø A 42.4 x 2.0 mm AISI 316 

Part no. Dimensions Thread Grade 

E0701/HP A = Ø 30 mm M6 AISI 316 

E0702/HP A = Ø 40 mm M6 AISI 316 

E071/HP A = Ø 60 mm M8 AISI 316 

E072/HP A = Ø 70 mm M8 AISI 316 

E073/HP A = Ø 80 mm M8 AISI 316 

E074/HP A = Ø 90 mm M8 AISI 316 

E075/HP A = Ø 100 mm M10 AISI 316 

E076/HP A = Ø 120 mm M10 AISI 316 

Ø A 

F 

Ø A 

M

AISI 316 

Part no. 

AISI 304 

Part no. 

For tube bar diam. No. A Y 

XM4421205F XM2421205F Ø 42.4 x 2.0 mm Ø 12 mm 5 170 mm 

XM4421207F XM2421207F Ø 42.4 x 2.0 mm Ø 12 mm 7 125 mm 

Y 

Y 

42.4 mm 

A 

42.4 mm 

AISI 316 

Part no. 

1000 

1000 

Part X031/S1316 

AISI 304 

Part no. 



All Newel Posts shown on pages 37 and 38 are in both 316 and 304 

Grade. All these parts are also available in Satin Polished (240 Grit). 

The part numbers for these are as below, but replacing the ‘X’ 

with an ‘E’ 

For example the Satin Polished version of part XM4421205F has 

the reference number EM4421205F. 

Part X4042 

Part X0069 


XM4421205F90 XM2421205F90 Ø 42.4 x 2.0 mm Ø 12 mm 5 170 mm 

XM4421207F90 XM2421207F90 Ø 42.4 x 2.0 mm Ø 12 mm 7 125 mm 

NEWEL POSTS 

1000 

Y 

42.4 mm 

AISI 316 

Part no. 

A 

Y 

Part X030/S316 Part X4072 

AISI 304 

Part no. 


XM4421205S XM2421205S Ø 42.4 x 2.0 mm Ø 12 mm 5 170 mm 

XM4421207S XM2421207S Ø 42.4 x 2.0 mm Ø 12 mm 7 125 mm 

42.4 mm 

AISI 316 

Part no. 

1200 

Part X113316 

AISI 304 

Part no. 


XL4421205F XL2421205F Ø 42.4 x 2.0 mm Ø 12 mm 5 170 mm 

XL4421207F XL2421207F Ø 42.4 x 2.0 mm Ø 12 mm 7 125 mm 


37

1200 

AISI 316 

Part no. 

AISI 304 

Part no. 


XL4421205S XL2421205S Ø 42.4 x 2.0 mm Ø 12 mm 5 170 mm 

XL4421207S XL2421207S Ø 42.4 x 2.0 mm Ø 12 mm 7 125 mm 

1000 



42.4 mm 

640 

AISI 316 

Part no. 

Y 

42.4 mm 

70 mm 

380 mm 

AISI 304 

Part no. 

Part X113316 

180 mm 

XP44202PF XP24202PF Ø 42.4 x 2.0 mm No 

XP44202PS XP24202PS Ø 42.4 x 2.0 mm Yes 

For tube Pivoting Handrail Supp. 

AISI 316 

Part no. 

AISI 304 

Part no. 

XP44204PF XP24204PF Ø 42.4 x 2.0 mm Yes 

AISI 316 

Part no. 

AISI 304 

Part no. 

XP44204PF90 XP24204PF90 Ø 43.0 x 1.5 mm No 




38 

1000 

640 

180 mm 

42.4 mm 

640 

180 mm 

1000 

Part X030/S316

¥ QUALITY CERTIFIED ¥ 

QUALITÀ CERTIFICATA 


CERTIFICATION 

HORIZONTAL PRESSURE RESISTANCE 

This test is meant to verify the possibility of deformations or 

break due to the application of a 3.5 kN load for 1min. The test 

is done applying the force on a specific point which is more 

subject to cause the failure of the tested object. The load is 

applied by a calibrated press that registers the applied strength 

and possible failure. All the clamps tested at TUV Italia s.r.l.’s 

laboratories passed the compression tests with no sign of 

deformations or fractures. 

TRACTION RESISTANCE 

The test consists of applying a 500 N (50kg) driving strength for 

300 seconds to a sheet blocked by a glass clamp. At the end of 

the test there must be no movements, deformations or fractures. 

IMPACT RESISTANCE 

The test consists of impacting a glass supported by 4 clamps 

with a 50kg body, by hitting it in the most critical point of its 

structure. The pendulum must have a length of 1.5 mt and has 

to cover a 30° angle from the moment of the release to the 

moment of the impact with the glass. 

CORROSION RESISTANCE 

The products have been put inside a saline fog room, to carry 

out the test according to ISO 9227:2006. The room nebulises a 

solution of salt NaCI at 5% with pH level between 6.5 and 7.2 

at a constant temperature of +35°C. 

Length of the test : 120 hours 

Arteferro has tested and certified quite 

a big variety of glass clamps including 

the Da Vinci Clamp System and the Glass 

System. They obtained TUV’s approval 

and certification. 

They have been approved according 

to DIN/EN 12600 safety standards. 

50kg 

50kg 


39

For more information go to www.barbourproductsearch.info

Aalco Stainless Steel Handrail Systems - BD Online Product Search

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?