User Manual - Axminster Tool Centre

More documents

Recommendations

Info

T-3 Water Cooled Sharpening System Leather Honing Wheel Japanese Waterstone SJ-200 Provides an extra fi ne mirror fi nish on hand tools where a minimum of steel removal is needed. Ideal for carving tools. 4000 grit. Available as an accessory. The Ultimate Solution for Square Edges The Tormek Square Edge Jig SE-76 automatically aligns the tool using its upper and fl at side, which ensures a 90° edge. This jig comes with the machine. The jig is used for shaping and sharpening. Honing on the Leather Honing Wheel is carried out using the Universal Support as tool rest. • Unlike conventional jigs, the upper and fl at side of the tool is always parallel to the Universal Support. • Special designed mounting clamp ensures fi rm mounting even of tapered chisels. • Safety stops prevent the tool from slipping off the stone. PATENT PENDING Universal Support • For vertical or horizontal mount. • Micro adjust with scale for each 0.25 mm (0.01"). AngleMaster Tormek Square Edge Jig Conventional Jigs Tormek Square Edge Jig Conventional Jigs Note: All jig solutions and accessory images are shown on the T-7 model. Safety Stop Unique New Truing Tool available A grinding stone should run true and have a fl at surface to give a good result. You can complete your machine with the patented Truing Tool TT-50, so you can keep your grindstone exactly round and fl at. Delivered as optional extra. Mounts instantly in a fi xed position on the Universal Support. Choice of feeding speed determines the stone character – a faster feed causes the stone to grind faster. Precise setting of cutting depth with Micro Adjust. Square Edge Jig Safety Stop Tormek Original Grindstone Developed to combine effi cient steel removal, smooth surface fi nish and long life. Can be graded with the SP-650 for a 1000 grit surface. 220 grit. Stainless Steel Shaft PAT PEND with EzyLock Easy and instant locking and unlocking by hand. Removable Water Trough Dual knobs for smooth feed across the stone. Fine surface Coarse surface
-3 ystem ety Stop Tormek Jig Solutions Knife Jig For most knives. Width 45 mm (1¾"). Long knives need to be stiff. Min blade length 60 mm (2⅜ "). Also for carver’s draw knives. Long Knife Jig Square Edge Jig Suitable for long and fl exible knives. The 140 mm (5½") width of the jig stabilizes a thin blade. Min blade length 160 mm (6¼"). Safety Stop Scissors Jig For scissors of all sizes and shears. Also suitable for portable electric hand planer blades. Axe JigTormek Original Grindstone For carving Developed and carpenter’s to combine axes. effi cient Max height steel of removal, axe 170 smooth mm (6½"). surface Copes with fi nish both and straight long life. and Can be curved graded edges. with the SP-650 for a 1000 grit surface. 220 grit. Short Tool Jig For straight shanked Stainless carving Steel gouges Shaft and V-tools down to 45 mm (1¾") PAT length. PEND with EzyLock Short wood chisels and Easy tools and for instant power lock- carvers. Max tool width ing 32 and mm unlocking (1¼"). by hand. Gouge Jig For fi ngernail shaped turning gouges of any geometry. Removable Plus shaft for turning cutters. Also for Water bent Trough carving gouges and V-tools. Max tool width 25 mm (1"). Multi Jig For turning skew chisels, parting and beading tools and roughing gouges. Straight carving gouges up to 50 mm (2") width. Tool Rest For turning scrapers, hollowing tools and thin parting tools. Also for cabinet scrapers, screwdrivers and spoke Unique New Truing Tool shave available blades. A grinding stone should run true and have a fl at surface to give a good result. You can complete your Planer machine Blade with Attachment the patented Truing Tool TT-50, so you can keep your grindstone For blades of exactly any length. round Blades and fl longer at. than Delivered as optional extra. 270 mm (10½") are relocated in the blade holder. Min width of blade 13 mm (½"). For this jig we recommend the larger T-7 model. Mounts instantly in a fi xed position on the Universal Support. Choice of feeding speed determines the stone character – a faster feed causes the stone to grind faster. Moulding Knife Attachment For all makes and shapes of moulding knives with 24, 30 or 38 mm distance Precise setting of cutting Dual knobs for smooth between guide hole centres. Max width depth with Micro Adjust. feed across the stone. of blade 100 mm (4"). For this jig we recommend the larger T-7 model. Drill Bit Sharpening Attachment Sharpens drill bits to a 4-facet point. Can be set at any angle between 90° and 150°. The optimal clearance angle Fine surface Coarse surface can be set for each drilling operation. Drill size 3 –22 mm (⁄"– ⅞ "). Included with the Tormek T-3 • Special designed mounting clamp ensures fi rm mounting even of tapered chisels. • Safety stops prevent the tool from slipping off the stone. Square Edge Jig For plane irons and wood chisels. Max tool width 76 mm (3"), max tool thickness 9 mm (⅜ "). Safety stops prevent the tool Machine Cover Tormek Square Edge Jig Conventional Jigs For protecting the machine from shavings and wood dust. T Water Cooled from slipping off Sharpening the stone. S AngleMaster Sets and measures the edge angle. Adjustable to any stone diameter from ∅ 250 mm (10") down to ∅ 150 mm Universal Support (6"). Measures from 10° to 75°. • For vertical or horizontal mount. • Micro adjust with scale for each Honing 0.25 mm Compound (0.01"). For application on the leather honing wheels. Grain size 3 micron (average). Removes the burr and polishes the Leather Honing Wheel edge to a mirror fi nish. Handbook Explains the basics in sharpening and how to best work with the Tormek system. 161 pages and 660 line drawings. Tormek DVD Brings the Handbook instructions to life. 24 minute including a 4 minute introduction to the Tormek way of sharpening. Japanese Waterstone SJ-200 Provides an extra fi ne mirror fi nish Additional on hand tools where Accessories a minimum of steel removal is needed. Ideal for carving tools. 4000 Truing grit. Tool Available as an accessory. Trues the grindstone exactly round and fl at. Guided by the Universal Support, which also guides the jigs. Dual knobs for smooth feed across the stone. PATENT PENDING Stone Grader The fi ne side grades the stone for a 1000 grit fi nish. The coarse side of the grader reverses the stone to normal fast grinding. Activates a glazed stone. AngleMaster Turning Tool Setter Replicates the geometry on turning gouges and skews when using the The Ultimate Solution SVD-185 for Square and SVS-50 Edges jigs. With The Tormek Square Edge Jig built SE-76 in edge automatically geometries. aligns the tool using its upper and fl at side, which ensures a 90° edge. This jig comes with the machine. The jig is used for shaping Woodturner’ and sharpening. s Instruction Honing Boxon the Leather Honing Wheel is carried out Contains using the TNT Universal DVD fi lm Support and detailed as tool rest. Handbook. Shows how to shape, • Unlike conventional sharpen and hone all your turning tools. jigs, the upper and fl at side of the tool is always parallel to Profi led Honing Wheels the Universal Support. For the inside honing and polishing of turning/carving gouges and V-tools. Tormek Square Edge Jig Conventional Jigs Set of two discs, one with a 3 mm (⅛") radius and one with a 60º tip. For narrow tools complement with LA-124 with 2 mm (⁄") radius and a 45º tip. Note: All jig solutions and accessory images are shown on the T-7 model. Saf
Page 1: Easy Sharpening With Full Control T

User Manual - Axminster Tool Centre

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?