overhead door holders/stops - Architectural Builders Hardware Mfg ...

Recommendations

Info

TOP PIVOTS Top pivots are supplied as part of pivot set or can be purchased separately. They are available in most architectural finishes. 0180 L0180 0320 0321 0340 * 0180 x 1 1 /2 • 3/4” offset top pivot • Non-handed, full mortise • Needle bearing supplied standard. Can be used on heavy duty doors • US32D models UL listed for use on 3 hour doors ® • 1-1/2” offset top pivot • Non-handed, full mortise • Needle bearing supplied standard. Can be used on heavy duty doors • extended pivot pins available • US32D models UL listed for use on 3 hour doors ® US C US C • Top pivot for center hung doors • Walking beam type • Standard duty • Dress plate provided for jamb portion • extended pins available • BHMA/ANSI C06021/3520 (modified) neW! • Top Pivot for 1-3/4” lead lined doors • 3/4” offset • Non-handed, full mortise • Needle bearing supplied standard • US32D models UL listed for use ® US C on 3 hour doors • Top pivot for center hung doors • Walking beam type • Light duty • Dress plate provided for jamb portion • extended pins available • BHMA/ANSI C06013/3500 • Top pivot for center hung doors • Walking beam type • Light duty • Dress plate provided for jamb portion • extended pins available • BHMA/ANSI C06013/3500 neW! • electrified Top pivot for center hung doors • Walking beam type • Standard duty • Dress plate provided for jamb portion • BHMA/ANSI C06021/3520 (modified) • 8-28ga. wires supplied standard 14 ABH Manufacturing, Inc. • www.abhmfg.com • 630.875.9900; Fax 800.932.9224 * AvAilAble on TArgeT-1 QuickShip. See inSide cover for deTAilS.
INTERMEDIATE PIVOTS Intermediate pivots are used to keep doors in alignment. All intermediate pivots are offset hung and cannot be used on center hung doors. Per NFPA 80, fire doors are to have an intermediate pivot for additional 30” or fraction thereof for door heights over 6’. Available in most architectural finishes. 019 * • 3/4” offset, handed • Full mortise • Needle bearing supplied standard Can be used on heavy duty doors • US32D models UL ® listed for use on labeled doors US C • BHMA/ANSI C07321/3525 019 x 1 1 /2 L019 E019 • Intermediate Pivot • For Power Transfer • 3/4” offset, handed • Full Mortise *Pivot cannot be separated for installation neW! • 1-1/2” offset, handed • Full mortise • Needle bearing supplied standard can be used on heavy duty doors • US32D models UL ® listed for use US C on labeled doors • BHMA/ANSI C07321 • Intermediate Pivot • For 1-3/4” lead lined doors • 3/4” offset, handed • Full mortise • Needle bearing supplied standard • US32D models UL ® listed for use on labeled doors US C • BHMA/ANSI C07311 • Can be used on heavy duty doors • US32D models UL listed for use on labeled doors ® US C • (8) 28ga. wires supplied standard* • Door and jamb portions are factory assembled ABH Manufacturing, Inc. • www.abhmfg.com • 630.875.9900; Fax 800.932.9224 * AvAilAble on TArgeT-1 QuickShip. See inSide cover for deTAilS. 15
Page 1 and 2: Contents Overhead Door Holders/Stop
Page 3 and 4: 3300ADJ ADJUSTABLE SeRIeS MeDIUM DU
Page 5 and 6: FRAME REINFORCEMENTS FOR JAMB BRACK
Page 7 and 8: 6040 SeRIeS eXIT ONLy PUSH-PULL LAT
Page 9 and 10: EX, H & X SERIES PUSH-PULL WITH HIP
Page 11 and 12: 2500 SURFACe WALL MOUNTeD 2600 SING
Page 13: 0195 • 3/4” offset • For inte
Page 17 and 18: SCRM 4500 SPECIAL COMBINATION ReSCU
Page 19 and 20: A270HD/A270LL FOR 2” DOORS • Co
Page 21 and 22: POWER TRANSFER GEAR HINGES All full
Page 23 and 24: HALF SURFACE A503 SURFACe MOUNTeD D
Page 25 and 26: POWER TRANSFER* PT/PTR/PTS105 PT/PT
Page 27 and 28: MANUAL FLUSH BOLTS Used to lock and
Page 29 and 30: ROLLER LATCHES ABH Roller Latches a
Page 31 and 32: HOSPITAL PUSH/PULLS ABH G-J ROCKWOO

overhead door holders/stops - Architectural Builders Hardware Mfg ...

Create successful ePaper yourself

Delete template?

Save as template?