overhead door holders/stops - Architectural Builders Hardware Mfg ...

Recommendations

Info

6600/6700 EXIT ONLY Patent No. 5,730,478 6,196,599 • 6600eO with mortise lock 2-3/4” backset • 6700eO for other manufacturers’ mortise lock • Indicate handing and push or pull handle • Trim available in all BHMA finishes • Back plate or Security plate available in Stainless Steel only • Junior cover (3-1/2” x 2-3/4”) available (prefix J) recommended when mounting push side horizontal. • Round cover available (prefix RC) 6800 LOW PROFILE PUSH/PULL SeRIeS 6812 6814 Patent No. 7,258,374 Patent No. 7,258,374 • Cover projection 7/8”, handle projection 2-5/8” • 2-3/4”, 3-3/4”, 5”, 7” backsets • Handing can be easily changed in the field (unless engraved handles used) • Roller latch conversion kit available, Part No. 601LB • exit only available • Standard or ASA strike • Available in most architectural finishes • UL listed • Round cover available (prefix RC) Order form available on-line or contact factory 6830 LOW PROFILE REVERSE LATCH SeRIeS 6000 DRILL JIG Patent No. 7,481,607 • Latch bolt is thrown only when push handle is activated and held • For use in psychiatric and mental patient areas or “time-out” rooms, schools and rehabilitative facilities • Push handle on one side, flat plate on the other side • Available with 2-3/4”, 3-3/4”, 5” or 7” backset • Backsets available in US32D ONLY • Handle can be mounted up or down • Does not violate Life Safety Codes • Standard for 1-3/4” thick doors • Back plate available in Stainless Steel only • Round cover available (prefix RC) Low Profile Order form available on-line or contact factory (RC) • The 6000 Drill Jig is for drilling the mounting thru-holes for the ABH 6000 Hospital Push/Pull latches. • Using 6000 Drill Jig will aid in properly locating the mounting holes in relation to the latch hub. This will prevent any binding of mechanical parts when mounting the trim assemblies. • 6000 Drill Jig can accommodate 2-3/4” to 5” backsets. • Locates from latch cam (hub) and latch bolt. • Drill bushings for 5/16” diameter drill • Can be used on both sides of the door • To order, use Part # 6000-JIG. 8 ABH Manufacturing, Inc. • www.abhmfg.com • 630.875.9900; Fax 800.932.9224 * AvAilAble on TArgeT-1 QuickShip. See inSide cover for deTAilS. * (RC) Low Profile (RC)
EX, H & X SERIES PUSH-PULL WITH HIP PADDLe OR HANDLe eXTeNSION FOR MOST 6000, 6600 AND 6700 MODeLS • EX Series - 6” extended handle PSEX6000 Pushside extended handle PLEX6000 Pullside extended handle PPEX6000 Both sides extended handles • Available in stainless steel only • Ideal for hospital scrub rooms and restaurant kitchen doors • H Series - oversize paddle on push side trim - Available in most BHMA finishes • Also available on 6800 series • Ideal for hospital scrub rooms and restaurant kitchen doors • Prefix H J PUSH/PULL SeRIeS WITH JUNIOR COveR Patent No. 5,730,478 6,196,599 ROUND COVER SERIES PUSH/PULL WITH ROUND COveR 601LB ROLLER LATCH CONVERSION 6055 T STRIKE EXTENDED LIP • X Series - handle extension - one side • Ideal for hospital scrub rooms and restaurant kitchen doors • Prefix X • Roller latch conversion kit allows a roller latch to be converted to standard spring latch using existing screws and door prep • Kit contains roller latch bracket and full lip, 4-7/8” ASA or 2-3/4” T strike as required • Kit can be ordered separately or as part of 6000 or 6800 hospital push/pull trim • Spring latch not included STRIKES FOR 6000 SERIES - (Contact Factory for Custom Strikes) FULL LIP STRIKE 1-1/4” x 2-1/4” EX SERIES Patent No. 5,730,478 6,196,599 RC6000 RC6600/RC6700 RC6800 0” 1-3/8” 1-5/8” H SERIES Patent No. 5,730,478 6,196,599 • Compact 3-1/2” x 2-3/4” cover for handles • Recommended for 1/2” clearance between the cover and jamb stop for 2-3/4” backset and mortise lock models when handles are mounted horizontally • Available for All series (except 6800) (prefix J) • Available in most BHMA finishes 6058 2-3/4” x 1-3/8” 605858 2-3/4” x 1-5/8” • Non-handed covers • Covers can be used on both sides of unit • Available in all BHMA finishes • Available for all Push/Pull Latch units • Ideal for use in psychiatric facilities for patient safety • Security screws available • Patent pending • Prefix RC 0” 1-3/8” 1-1/2” 1-5/8” ASA STRIKE 6059 4-7/8” x 1-3/8” EXTENDED LIP 605912 4-7/8” x 1-1/2” 605958 4-7/8” x 1-5/8” X SERIES Patent No. 5,730,478 6,196,599 ABH Manufacturing, Inc. • www.abhmfg.com • 630.875.9900; Fax 800.932.9224 * AvAilAble on TArgeT-1 QuickShip. See inSide cover for deTAilS. * 6603RL For 6600 Mortise Lock Series neW! 6059RL For 6000 Cylindrical Latch Bolt Series 9
Page 1 and 2: Contents Overhead Door Holders/Stop
Page 3 and 4: 3300ADJ ADJUSTABLE SeRIeS MeDIUM DU
Page 5 and 6: FRAME REINFORCEMENTS FOR JAMB BRACK
Page 7: 6040 SeRIeS eXIT ONLy PUSH-PULL LAT
Page 11 and 12: 2500 SURFACe WALL MOUNTeD 2600 SING
Page 13 and 14: 0195 • 3/4” offset • For inte
Page 15 and 16: INTERMEDIATE PIVOTS Intermediate pi
Page 17 and 18: SCRM 4500 SPECIAL COMBINATION ReSCU
Page 19 and 20: A270HD/A270LL FOR 2” DOORS • Co
Page 21 and 22: POWER TRANSFER GEAR HINGES All full
Page 23 and 24: HALF SURFACE A503 SURFACe MOUNTeD D
Page 25 and 26: POWER TRANSFER* PT/PTR/PTS105 PT/PT
Page 27 and 28: MANUAL FLUSH BOLTS Used to lock and
Page 29 and 30: ROLLER LATCHES ABH Roller Latches a
Page 31 and 32: HOSPITAL PUSH/PULLS ABH G-J ROCKWOO

overhead door holders/stops - Architectural Builders Hardware Mfg ...

Create successful ePaper yourself

Delete template?

Save as template?