The Pioneer Forecart - Aaron Martin Harness

2012 Catalog 

Manufacturers of Quality Farm Equipment Since 1978. 

Pioneer Equipment Inc. • 16875 Jericho Road • Dalton, Ohio 44618 • 888.857.6340 • Fax: 330.857.0296

Welcome to Pioneer Equipment 

Thank you for your interest in Pioneer Equipment products. 

We consider it a privilege to serve you and we are always open 

to your ideas and suggestions. It is our goal to provide you 

with superior service and value. We continue to honor our 

commitment to quality and pursue new horse-drawn 

equipment innovations. 

Today, employing 30 dedicated employees and working daily 

with over 20 local suppliers and businesses, Pioneer 

has become an integral part of the local community 

and the local economy. 

We also support other organizations that promote 

sustainable horse farming. Horse Progress Days is an 

annual event that promotes draft animal power. 

Green Field Farms is a local organic co-op dedicated 

to conserving our Amish farms and our way of life. 

We encourage you to buy local and support 

organizations like these. 

We are also conscious of our environmental footprint and recycle all sorts 

of materials used in our manufacturing processes. We believe it is our moral 

responsibility to God and future generations to practice faithful stewardship 

of our land and resources. 

3 

83 

83 

585 

Wooster 

2 

23 

Holmesville 

Applecreek 

30 

Fredericksburg 

Mount 

Hope 

Orrville 

Kidron 

Emerson Rd. 

363 

250 

241 

160 

52 

94 

Jericho Rd. 

Winesburg 

Pioneer Equipment • 888.857.6340 

Dalton 

241 

Mount 

Eaton 

PIONEER 

62 

West 

Lebanon 

Wilmot 

Our Location 

Pioneer is conveniently located at 16875 Jericho Road. This is 

one-half mile east of State Route 94. We are five miles south of Dalton, 

three miles north of Mt. Eaton, or three miles east of Kidron. 

Our Hours 

We are open 7:00 a.m. to 4:00 p.m. Monday through Friday. Saturday 

hours are 7:00 a.m. to noon. Closed Sundays.

Table of Contents 

Homesteader ................................................. 1 

Buckboard ...................................................... 3 

Gang Mower ................................................... 5 

Dump Trailer .................................................. 6 

Forecarts......................................................... 7 

Blades ........................................................... 12 

Potato Plow .................................................. 13 

Training Carts ............................................... 14 

Plows............................................................. 15 

Harrows ........................................................ 23 

Wagons ......................................................... 26 

Sleds ............................................................. 36 

PTO Carts ...................................................... 37 

Neckyokes & Eveners................................... 43 

Tongues ........................................................ 47 

Wheels & Rims .............................................. 49 

Patio Seats .................................................... 51 

Ordering & Shipping ................................... 52 

Pioneer Equipment • 888.857.6340

The Pioneer Homesteader 

Versatility... Innovation... 

Plowing, Harrowing, Discing, Planting, Cultivating & Harvesting 

Years of research have gone into the design of this universal tool to make it 

user friendly, safe and easy to operate. Designed especially for the hobby farmer 

and the homesteader, this new tool features a two pin, easy change toolbar 

allowing a quick and easy switch of attachments. Footpedal steering and seat 

placement above and behind the tool provide optimum control and visibility 

when working with delicate or row crop plants. 

Plow, Till, Plant, Cultivate and Harvest 

your crops with the new Pioneer Homesteader. 

Features & Specifications 

• Oil impregnated greaseless bushings 

• Adjustable tread width 40”- 48” 

• Toolbar in front of axle - for better visibility 

• Adjustable tongue fits draft or haflinger size horses 

• Foot pedal steering for precise control 

1 Pioneer Equipment • 888.857.6340 

Easily switch between attachments with our unique 

two-pin system. (No tools required.) 

Potato Plow 

Hiller

10” Plow 

Cultivator 

Harrow 

Disc 

Homesteaders come with seat, tongue, singletrees, and eyebolt 

neckyoke. Attachments are all sold separately. 

Homesteader 

Item No. Description Weight 

6700 Homesteader 338# 

Attachments 


6731 10” Plow 100# 

6732 Cultivator 51# 

6733 Harrow 89# 

6734 Disc 124# 

6735 Hiller 46# 

6736 Potato Plow 31# 


2

The Pioneer Buckboard 

Versatility... Innovation... 

Going to town? Hauling Firewood? Fetching sawdust? Going to a picnic? Taking a 

sheep to market? Designed especially for the hobby farmer and the homesteader, the 

Pioneer Buckboard is the solution. Extensive research, combined with a universal 

design using the latest material technology provide the ultimate vehicle for all your 

transportation needs. Exclusive to Pioneer, the new Buckboard is equipped with the 

Quick-Latch rail system, allowing you to easily convert your wagon without tools. 

Pull it with a single standardbred or a team of ponies. 


• 1500 lb. load capacity 

• Bed size = 36”wide x 96” long 

• Overall width, outside of wheels 67” 

• Fifth wheel steering 

• Hydraulic or block brakes 

• Tongue and shafts available 

• Black paint or Automotive Finish 


New Pioneer Quick-Latch rail system with stainless steel latches 

allows you to quickly convert your Buckboard to meet your 

needs for the day ahead.

Bench Seats 

All wagons shown with rail dash. 

Children’s Seats 

Livestock Rack 

Sideboard Extensions 

Stained with Bench Seats 

First choose the gear you want then add accessories as needed. 

Gears come with wheels and leaf springs. 

Buckboard 


6501 Gear with wood wheels/steel tire 288# 

6502 Gear with wood wheels/rubber tire 288# 

Options & Accessories 

Item No. Description 

6520 Hydraulic Brakes on rear axle 

6521 Hydraulic Brakes on 4 wheels 

6526 Rubber Block Brakes w/lever 

9575 Hydraulic Brake Pedal w/master cylinder 

9576 Plumbing Kit w/lock valve 

6531 Shafts - haflinger/standardbred 

6532 Shafts - draft 

2010 Holdbacks 

6535 Steel Tongue - haflinger size w/doubletree & neckyoke 

Buckboard Beds & Attachments 

All beds come with one seat and your choice of plain or rail dash. 


6550 Bed w/plain dash 198# 

6551 Bed w/rail dash 200# 

6580 Extra Bench Seat w/cushions 65# 

6581 Children’s Seats 84# 

6582 Sideboards 40# 

6583 Livestock Rack (auto finish N/A) 71# 

Automotive Finishes 

Standard color = black paint 


6560 Automotive Black Finish on bed & wheels 

6561 Automotive Clear Finish on bed & wheels 

6562 Wood Stain w/Auto Clear Finish on bed & wheels 

6590 Automotive Black Finish on attachment 

6591 Automotive Clear Finish on attachment 

6592 Wood Stain w/Auto Clear Finish on attachment 



6566 Mirrors 

6570 LED Lights - 2 way red/white w/turn signals 

6571 LED Lights - 2 way amber w/headlights 

6572 Tailights w/turn signals 

2342 Whip Socket 

2341 Cupholder 

6575 Floor Mat 

6576 Assembled - gear, bed & brakes 


4

Pioneer Gang Mower 

The new Gang Mower is designed to make short work of larger 

lawns, yet it is agile enough to manuever in small yards and tight 

quarters. Footpedal steering provides maximum control around 

trees and landscaping. A universal mount, for each individual mower, 

prevents skips by easily conforming to the contour of your lawn. 

Features and Specifications 

• Wheels behind mower prevents driving over unmowed grass 

• Floating design on all reels 

• Foot pedal steering for maximum control 

• Adjustable for large or small horses 

• Cutting width = 52” 

• CL reels are Made In U.S.A. 

• SP reels are imported 


CL Clipper Reel 

• Made in USA 

• Hardened & tempered blades for long life 

• Heavy duty drive mechanism 

• Riveted blades for a precision cut 

Silver Pro Reel 

• Imported 

• Welded blades 

• Standard drive mechanism 

• Economy model 

Mowers come with seat, reels, and shafts. 

Gang Mower 


6901 Gang Mower w/steel wheels - CL reels 350# 

6902 Gang Mower w/air tires - CL reels 342# 

6903 Gang Mower w/semi-pneu - CL reels 364# 

6910 Gang Mower w/steel wheels - SP reels 350# 

6911 Gang Mower w/air tires - SP reels 342# 

6912 Gang Mower w/semi-pneu - SP reels 364#

Pioneer Dump Trailer 

The Pioneer Dump Trailer makes hauling 

a breeze. For dependable and easy unloading we offer 

a mechanical winch. Works well for hauling gravel, dirt, 

manure, firewood and much more. 


• Bed size 4’ wide x 8’ long 

• Overall width outside of wheels = 76” 

• 3500 lb. load capacity 

• 3/4” x 13” high exterior plywood sides 

• Treated tongue and groove floor 

• Wood is available in red or green color 

• Removable tailgate can swing or lock into up position 

• Aluminum beds are lightweight and will not rust 

Wood Sided Dump Trailer Specify Red or Green Color 


4701 Dump Trailer with 5-1/2”x28” steel wheels 925# 

4702 Dump Trailer with 15” rims & used tires 895# 

4703 Dump Trailer with 15” rims & new 6.70-15 tires 895# 

Aluminum Dump Trailer 


4707 Dump Trailer with 5-1/2”x28” steel wheels 730# 

4708 Dump Trailer with 15” rims & used tires 700# 

4709 Dump Trailer with 15” rims & new 6.70-15 tires 700# 


6

The Pioneer Forecart 

Poly Bench Seat 

Last longer than our wood seat and is 

the perfect choice for pleasure driving. 

Leaf springs provide comfort and a smooth 

ride. Added safety for student teamsters. 

Overall width: 

Draft = 44” 

Haflinger & Pony = 40” 

Cushions 

For additional comfort and a classic look. 

Choose either burgundy or black vinyl. 

Canvas Bench Seat Cover 

Keep your seat clean and dry. Made from 

durable, waterproof canvas material. 

LED Lights 

Prepare your forecart for the road. Our kit 

includes 2 amber flashing LED lights with 

battery and switch, reflective tape and SMV 

emblem. It is easy to install on any forecart 

with a bench seat. 

Implement Seat 

Ideal for all farm applications. Attach to 

spring mounted seat bracket. Swivels a 

full 360 o and locks in any position. 

Now available with a cushion for 

added comfort. 

Hillside Steering 

Works well for hillside row crop applications, 

allowing you to steer the wheels right or 

left. Easy to reach, hand lever operation. This 

factory installed option is only available on 

heavy-duty draft forecarts. 


Reese Hitch Receiver 

Receiver will take any 2” Reese insert 

including our Cargo Tray. Remove 

insert to access drawbar holes without 

removing the receiver. 

Torsion Axles 

Smooth your ride over rough 

terrain with trailer type rubber 

torsion axles. This factory installed 

option is only available on heavy-duty 

Draft, Haflinger and Pony Forecarts, 

with either no brakes or hydraulic brakes. 

Cargo Tray 

Now you have a way to haul all of 

your extra cargo. Use with #8240 Reese 

hitch receiver. 

Inside Dimensions: 17”W x 29”L x 9” H 

12 Volt Hydraulic Unit 

Works well for any application where only 

hydraulics are needed. Easily mounts to any 

Pioneer Forecart. 

Toolbox 

Ideal for tools, gloves and spare parts. 

Made of cast aluminum, it will never rust. 

Easily mounts on guard or seat post. 

Fenders 

Cover your wheels and extend the platform 

for added teamster safety. We recommend 

the use of fenders when using a bench seat. 

Cupholder 

Take your drink to the field. Whether it’s 

hot coffee in the morning, or a cold drink 

in the afternoon. 

Whip Socket 

Tapered design to fit most any style whip.

Sun Shade 

Provides added comfort and protection 

from the sun when driving on warm 

summer days. Easily folds back for entry. 

Mounts on any draft forecart with bench seat. 

Wheels 

Select the proper wheel for your application. 

• Air Tires 

• Steel Wheels 

• Bolt on sled runners. 

Tongues 

Available in ash hardwood or steel 

construction. Three position mounting 

for special hitches. 

Length from hitch pin to neckyoke: 

Pony = 85”, 

Haflinger = 102”, 

Draft = 121” 

Brakes 

Mechanical Brakes are band type with 

replaceable lining. Foot pedal operated 

with lock. 

Hydraulic Brakes are 10” trailer type 

and foot pedal operated with lock valve. 

All brakes are factory installed, tested 

and adjusted. 

Shafts 

For single horse driving. Our shafts 

feature all steel construction for safety 

and durability. Easily switch from tongue 

to shafts using only two bolts. 

Shaft Measurements 

Length from singletree Distance between pipes 

to front of shaft pipe: at narrowest point: 

Mini = 46” Mini = 15” 

Pony = 60” Pony = 19” 

Cob = 70” Cob = 22” 

Haflinger = 76” Haflinger = 23” 

Draft = 87” Draft = 27” 


8

The Pioneer Draft Forecart 

Proven by many years of on-the-farm performance, the popular 

PIONEER forecart offers dependable trouble-free service on the road 

and in the field. Quality materials and workmanship throughout, 

with a simple, well-balanced design means true value 

and economy. 


• Standard cart has 4-bolt wheel hubs for general farm work 

• Heavy duty cart has heavier spindles and 6-bolt wheel hubs 

(Recommended when using steel wheels) 

• Overall width (outside of tires) 64” 

• 15” rims mounted with good used tires or new implement tires 

First choose the forecart that fits your application then add accessories as 

needed. Forecarts come with seats and wheels as listed. Torsion axles, 

hydraulic brakes and hillside steering are available on heavy duty carts only. 

Draft Size Forecarts 


8010 Standard Cart w/implement seat, 15” rims w/used tires 231# 

8012 Std. Cart w/implement seat, 15” rims w/new 6.70 -15 tires 231# 

8015 Standard Cart w/implement seat, 15” rims only 182# 

8020 Standard Cart w/implement seat, 28” steel wheels 248# 

8025 Standard Cart w/poly bench seat, 15” rims w/used tires 269# 

8027 Std. Cart w/poly bench seat, 15” rims w/new 6.70 -15 tires 269# 

8030 Standard Cart w/poly bench seat, 15” rims only 219# 

8035 Standard Cart w/poly bench seat, 28” steel wheels 285# 

8040 Heavy-duty Cart w/implement seat,15” rims w/used tires 259# 

8041 HD Cart w/implement seat, 15” rims w/new 6.70 -15 tires 259# 

8045 Heavy-duty Cart w/implement seat, 15” rims only 203# 

8050 Heavy-duty Cart w/implement seat, 28” steel wheels 289# 

8055 Heavy-duty Cart w/poly bench seat, 15” rims w/used tires 296# 

8057 HD Cart w/poly bench seat, 15” rims w/new 6.70 -15 tires 296# 

8060 Heavy-duty Cart w/poly bench seat, 15” rims only 240# 

8065 Heavy-duty Cart w/poly bench seat, 28” steel wheels 326# 


Standard Cart with implement seat and air 

tire wheels. Shown with optional mechanical 

brakes, guard and tongue. 



8235 Rubber Torsion Axles 

8255 Mechanical Brakes 

8279 Hydraulic Brakes 

8275 Guard - draft size 

8280 Guard - haflinger size 

8108 Implement Seat 

8106 Cushion for implement seat 

8100 Seat Bracket 

8209 Wood Bench Seat 

8210 Poly Bench Seat 

8109 Cushion Set - burgundy 

8110 Cushion Set - black 

8120 Canvas Cover for bench seat 

8121 Sun Shade 

8271 Steel Tongue - 13’ draft size 

8264 Wood Tongue - 13’ draft size 

8265 Wood Tongue - 14’ for multiple hitches 

8266 Wood Tongue - haflinger size 

2062 Tongue Cap 

8293 Shafts - draft size 

8294 Shafts - haflinger size 


8216 Fenders w/extensions 

8217 Platform Extensions only 

8220 Cargo Tray 

8240 Reese Hitch Receiver 

8241 Reese Ball Mount - w/2” ball 

8245 Drawbar Extension 

8219 LED Light Package - w/battery 

8223 12V Hydraulic Unit 

8236 Chrome Hubcaps w/hydraulic brakes only 


2346 Lineholders (See page 20 for more info.) 


2323 Toolbox - black 

2328 Toolbox Bracket for seat post 

2329 Toolbox Bracket for guard 

8229 Hillside Steering 

9090 Sled Runners for standard cart - set of 2 

9091 Sled Runners for heavy duty cart - set of 2 

9092 Sled Runners for cart w/hydraulic brakes - set of 2 

9075 Safety Chains (for runners) 

9048 New 6.70 - 15 implement tire

The Pioneer Haflinger Forecart 

Made especially for the smaller draft breeds and lighter breeds such as Standardbreds and 

Quarter Horses. This forecart has the same features as our larger forecarts, and with a full range 

of options and accessories you can easily order one to fit your application. 

Overall width (outside of tires) 53-1/2”. 

First choose the forecart that fits your application then add 

accessories as needed. Forecarts come with seats and wheels 

as listed. 

Haflinger Forecarts 


8401 Cart w/implement seat, 175/80 - 13” tires 176# 

8403 Cart w/implement seat, 24” steel wheels 186# 

8405 Cart w/poly bench seat, 175/80 - 13” tires 208# 

8406 Cart w/poly bench seat, 24” steel wheels 218# 






8413 Guard 









8418 Wood Tongue 

Haflinger Forecart with bench seat, 13” tires 

shown with optional cushions, guard, shafts, 

fenders, cargo tray, brakes and light package. 

Options & Accessories (Continued) 


2062 Tongue Cap 


8322 Shafts - cob size 


8420 Fenders 






2346 Lineholders (see page 20 for more info.) 





9097 Sled Runners - set of 2 



10

The Pioneer Pony Forecart 

This down-sized version of our standard Pioneer forecart is ideal for 

ponys or small horses. Outfitted with the same features of our larger 

forecarts, you can customize your unit with additional options 

and accessories. 

Pony Cart with implement seat, air tires 

and optional hydraulic brakes, guard, 

shafts and holdbacks. 

Pioneer Sled Runners 


Convert your forecart or 

wagon to a sled. Pioneer 

Sled Runners bolt directly 

to your wheel hubs. 

First choose the forecart that fits your application then add 

accessories as needed. Forecarts come with seats and wheels 

as listed. 

Pony Forecarts 


8301 Cart w/implement seat, 5.30 - 12” tires 146# 

8303 Cart w/implement seat, 20” steel wheels 166# 

8305 Cart w/ poly bench seat, 5.30 - 12” tires 178# 

8306 Cart w/ poly bench seat, 20” steel wheels 198# 






8313 Guard 









8318 Wood Tongue 

2059 Pony Tongue Cap 

8319 Shafts - pony size 



8320 Fenders 













Sled Runners 


9090 Runner set for standard cart 122# 

9091 Runner set for HD cart 122# 

9092 Runner set for cart w/hydraulic brake 142# 

9093 Runner set for 6-ton gear 244# 


9095 Runner set for 3-6 ton gear w/hyd. brake 284# 


9097 Runner set for pony and haflinger cart 96# 

9072 Safety Chains (1 Ton Gear) 

9073 Safety Chains (3-6 Ton Gear) 

9074 Safety Chains (Haflinger/Pony Cart) 

9075 Safety Chains (Draft Cart)

The Pioneer Blade 

Put your Pioneer forecart to work with this durable blade attachment. 

Use the blade for scraping barnyards, grading driveways or leveling dirt. 

For plowing snow, we recommend using the optional blade wings and 

skid shoes. Conveniently mounts to any Pioneer draft forecart with just 

two bolts. A well-balanced design and convenient adjustments make 

the blade easy to operate. Blade mounted on draft forecart 

with optional skid shoes and wings. 


• Blade widths of 6’ or 7’ 

• Adjustable lever depth control 

• Floating position for leveling large areas 

• Angle and tilt adjust to right or left 

• Convenient spring pin adjustment 

• Reversible blade doubles blade life 

Blades 


8201 6’ Blade - complete 193# 

8202 7’ Blade - complete 211# 

8206 Adjustable Skid Shoes - set 17# 

8205 Blade Wings - set 57# 

8207 6’ Replacement Blade only 78# 

8208 7’ Replacement Blade only 96# 

8204 Lift Assembly only 115# 


12

The Pioneer Potato Plow 

This unique add-on features a heat treated furrower that digs potatoes 

and rolls them out for easy pickup without damage. Available as a 

complete unit or as an attachment for the Pioneer blade. 

Potato Plow 


8212 Potato Plow - complete w/lift 120# 

8213 Potato Plow - attachment only 44# 

8214 Replacement Furrower 7# 

13 Pioneer Equipment • 888.857.6340

The Pioneer Training Cart 

Safety... Versatility... Innovation... 

Truly in a class of its own, the all new Pioneer Training Cart is the 

latest innovation for the horse trainer and driver. Extensive research, 

combined with the latest technology in suspension and design, 

provides the durability and peace of mind you need while training 

your horses. The spacious platform, with angled foot rest makes 

driving safe and comfortable. Numerous adjustments on the axle, 

seat and shafts eliminate balance issues. Choose the angled seat 

for training or the traditional spring mounted bench seat for 

pleasure driving. 


• Front and rear entry 

• 38” rubber tired wooden wheels with flush hub 

• Overall width, outside of wheels = 62” 

• Raised seat for better view and stability 

• Rear step provides easy access 

• Heavy duty spindles with taper roller bearing hubs 

• Easily switch from tongue to shafts 

First choose the Training Cart that fits your application then add 

accessories as needed. Training Carts come with seats as listed. 

Standard color is red with black wheels. 

Training Cart 


8801 Training Cart with angled seat 525# 

8802 Training Cart with bench seat 551# 

8817 Maroon & Cream color 



8821 Angled Seat with cushions 

8822 Bench Seat with cushions 

8834 Steel Tongue - draft size w/doubletree & neckyoke 

8836 Steel Tongue - haflinger size w/ doubletree & neckyoke 




8827 Fenders 

8828 Rear Step 

8819 LED Light Package -w/battery 




14

The Pioneer Walking Plow 

An economical option for the small farmer or homesteader, 

our walking plow features a simple yet dependable design 

for years of trouble-free service and is easy to use in nearly 

all soil conditions. Standard equipment includes a sod 

breaking jointer, fully adjustable depth gauge wheel, 

convenient swivel hitch clevis, and steel handle slide 

to eliminate wear on wood handles. 


Sizes: 12”, 14” or 16” available in RH or LH 

Bottoms: Oliver, 14” John Deere 

Beam: 2-piece higher strength carbon steel 

Hitch: horizontal and vertical adjustment for various hitch sizes 

Clevis: forged steel swivel type 

Handles: No. 1 select hardwood 

Gauge Wheel, Handle Slide, Jointer and Clamp: included 

Coverboard: optional - not included 

Length: 98” overall 

Width: 36” overall 

Height: 36” overall 

Jointer 

Provides a clean furrow when plowing sod. Features a 

strong, stress-proof steel shank and replaceable point 

and moldboard. Available in right and left hand. 

Gauge Wheel 

Helps control depth. Semi-steel, 7” wheel mounts on 

adjustable shank. Universal clamp allows wheel to be 

used on most walking plows. 

Plow Handle 

Made from select hardwoods. Blank 1” x 2” x 5’ handles 

fit most walking plows and cultivators. 

Handle Slide 

Prevent excessive wear and keep hands dry in 

wet or muddy conditions. Readily bolts on to 

most walking plows. 


Plows come complete with jointer, gauge wheel, swivel 

clevis and handle slide as shown. 

Walking Plows 

RH Item No. LH Item No. Description Weight 

5312-R 5312-L 12” Walking Plow 257# 



Walking Plow Accessories 

Jointers 

RH Item No. LH Item No. Description 

5128-R 5128-L Jointer 

5571 5571 Jointer Clamp 

CF-4-R CF-3-L Jointer Frog 

CE-6-R CE-5-L Jointer Point 

CT-8-R CT-7-L Jointer Moldboard 

Gauge Wheels 


5324 Gauge Wheel Assembly - includes clamp 

5320 Gauge Wheel - wheel mounted on shank 

5323 Clamp Only 

5325 Gauge Wheel only - 3/4 bore with grease fitting 

Plow Handles 


5322 Plow Handle (each) 

5326 Plow Handle (dozen) 

Handle Slide 


5321 Handle Slide 

14” RH with Oliver Bottom

The Pioneer Footlift Sulky Plow 

This sulky plow combines modern materials with field-proven features borrowed from the plows of a bygone era. 

It is safe and easy to operate with a hands-free spring assist footlift and lowering pedal. Both the landslide and 

furrow wheels are connected to the steering framework and coupled to the tongue so that when the horses turn, 

so does the plow. Continuous improvements in design ensure ease of operation and years of service in the field. 

A unique feature on the 

Pioneer Sulky Plow is a safety bolt 

that shears if the bottom hits a solid object. 

This virtually eliminates the possibility 

of a broken evener, torn harness 

or damage to the plow. 

14” with KV bottom with optional coulter and toolbox 


Sizes: 12”, 14” or 16” available in RH only 

Bottoms: Oliver, Kverneland, or 14” John Deere 

Frame: heavy tubular steel 


Axles: precision machined carbon steel 

Wheel Hubs: 4-bolt with tapered roller bearings 

Furrow & Rear Wheel: solid web type eliminates trash pickup 

Land Wheel: heavy duty spoke type 

Tongue: wood with sliding neckyoke 

Hitch: ample adjustment for various hitch sizes 

Steering: tongue steers furrow and rear wheel 

for maneuverability and precise control 

Footlift: spring assisted, hands-free lowering and raising of plow 



Height: 48” minimum 

Improvements Include: 

• Wider wheel base for better stability 

• New lift spring location for smoother travel 

• Spring detent furrow lever for better control 

• Raised framework for better clearance 

• New furrow axle to eliminate caster affect 

Plows come with seat, bottom, coulter clamp and tongue 

with neckyoke. For other accessories see page 18. 

Footlift Plows 


5712 N/A 12” Footlift Plow /Oliver 689# 

5714 N/A 14” Footlift Plow /Oliver or JD 692# 

5716 N/A 16” Footlift Plow /Oliver 695# 

5712-KV N/A 12” Footlift Plow /KV 715# 




16

The Pioneer Sulky Plow & Accessories 

Built for performance and reliability, 

the Pioneer sulky plow can handle any 

type of soil conditions, plowing at a 

uniform depth at all times. All levers 

and controls are easily reached from 

our large, comfortable and 

spring-mounted seat. Width and depth 

are widely adjustable. It also features 

beam-to-bottom clearance and a full 

width coverboard for excellent trash 

and cover crop covering. Choose 

from three sizes and a range of 

adjustments and options to get 

just the right combination 

you need. 


Sizes: 12”, 14” or 16” available in RH or LH 





Furrow Wheel: solid web type construction 


Hitch: ample adjustment for various hitch sizes 



Height: 37” minimum 


14” RH with KV Bottom and optional coulter 

A unique feature on the Pioneer Sulky Plow 

is a safety bolt that shears if the bottom hits 

a solid object. This virtually eliminates the 

possibility of a broken evener, torn harness 

or damage to the plow. 

Coulter 

For use on sulky and gang plows. Freely cuts 

field residue for cleaner furrows and better 

trash coverage. Features a 17” fluted blade, 

adjustable 1-3/8”swivel stem and 4-bolt 

tapered roller bearing hub. 

Toolbox 

Made of cast aluminum, it is ideal 

for tools, gloves and spare parts. 

5-1/2” wide x 12-1/2” long x 4” high 

Seat Cushion

Coulter or Jointer Clamp 

This universal clamp bolts to any 

plow beam. It securely clamps the 

coulter or jointer in position, 

yet allowing for easy adjustment. 

Spring Lift 

Our fully adjustable 

spring lift can be added 

to your Pioneer sulky 

plow to assist when lifting 

the plow out of the ground. 

It works on RH or LH 

models. All mounting 

hardware included. 

Spring Hitch 

Designed to act as a 

shock absorber and 

will ease the strain on 

horses in rocky soil. 

Landside Wheel 

This cast iron wheel, with tapered roller bearings, replaces the long 

landside and heel on a sulky plow. It works on RH or LH models. 

All mounting hardware included. 

4-Horse Plow Equalizer 

Designed to eliminate side draft on plows when 

using 4-abreast with no horse on plowed ground. 

Works on RH or LH models. Available with or 

without doubletrees. 

Tongue Adapter 

Bolted directly to the plow, 

our tongue adapter provides 

better control, especially in hilly 

conditions. Use your tongue or 

use our No. 5133 plow tongue 

with neckyoke. It works on RH 

or LH models. All mounting 

hardware included. 

Sulky plows come with seat, footlift, bottom and coulter 

clamp included. All other options and accessories need to 

be ordered separately. 

Sulky Plow with Oliver Bottom 


5612-R 5612-L 12” Sulky Plow 450# 

5614-R 5614-L 14” Sulky Plow 455# 

5616-R 5616-L 16” Sulky Plow 460# 

Sulky Plow with Kverneland Bottom 


5612 KV-R 5612 KV-L 12” Sulky Plow 478# 



Sulky Plow Accessories 


5150 5150 Coulter 

5200 5200 Coulter Blade - 4 or 6 bolt 

5128-R 5128-L Jointer 

5571 5571 Coulter or Jointer Clamp 

5114 5114 Tongue Adapter 

5133 5133 Plow Tongue w/neckyoke 

5107 5107 Spring Lift 

5140 5140 Spring Hitch 

5170-R 5170-L Landside Wheel 

2089 2089 4-Horse Equalizer only 

2090 2090 4-Horse Equalizer w/doubletrees 

2323 2323 Toolbox 

2330 2330 Toolbox Bracket/Sulky 

2332 2332 Toolbox Bracket/Footlift 

8106 8106 Cushion for implement seat 


18

The Pioneer Gang Plow 

Provides increased production for larger farms 

Our best-in-class 2-bottom gang plow features conventional steel plow 

bottoms to ensure continued parts availability. Ample clearances and full 

width coverboards provide good trash flow and coverage, while the fluted 

coulters slice through residue for clean furrows. Width and depth of cut 

are fully adjustable. Furrow and rear wheel steering allow precise control 

on turns, and an elevated operator’s platform provides an unobstructed 

view. Raising and lowering the plow bottoms in and out of the ground is 

made easier with a convenient D-handle over-center lever, while a handy 

foot latch holds them securely in the raised position. 

Continuous improvements in design ensure ease of operation 

and years of service in the field. 


• New spring location for smooth travel 

• New foot pedal to lower bottoms 

• Raised framework for better clearance 

• New furrow axle to eliminate caster affect 

12” with Oliver Bottoms 

and optional toolbox 



Sizes: 12” , 14” or 16” available in RH only 


Coulters: slice through residue for cleaner furrows 

Tongue: wood with sliding neckyoke 

Frame: heavy tubular steel 

Beams: 2-piece higher strength carbon steel 



Furrow and Rear Wheel: solid web type 


Hitch: ample adjustment for various size hitches 

Steering: tongue steers furrow and rear wheel 

for precise control 



Height: 76” minimum

Hydraulic Lift 

This option provides the ultimate in ease of 

operation. Although our Gang Plows lift with little 

effort, the hydraulic assist allows old and young alike 

the ability to plow all day long with less fatigue. 

Pioneer Line Holders 

Safely free your hands to make adjustments, even 

when you’re alone in the field. They provide a sure 

grip and a quick and easy release. 

Spring Hitch 

Designed to act as a shock 

absorber and will ease the 

strain on horses in rocky soil. 

The oblong, knurled line holders provide 

a non-slip grip and work well with both 

leather and synthetic lines. 

Foot latch and D-Handle over center lever in raised position. 

Gang plows come complete with seat, bottoms, coulters and tongue 

with neckyoke as shown. 

Gang Plows 


5912 12” Gang Plow 1218# 

5914 14” Gang Plow 1237# 

5916 16” Gang Plow 1256# 

5912-KV 12” KV Gang Plow 1283# 

5914-KV 14” KV Gang Plow 1297# 

5916-KV 16”KV Gang Plow 1311# 

Gang Plow Accessories 

5920 Spring Hitch 

5925 Hydraulic Lift w/Battery 

2322 Toolbox 



2346 Lineholders 

2072 Heavy 4-Horse plow equalizer only - 67” 

2073 Heavy 4-Horse plow equalizer w/doubletrees 



20

Ralph J. Rice of Jefferson, Ohio with his three Percherons, 

Pearl, Prince and Dolly hitched to his Pioneer Sulky Plow 

with Kverneland bottom. 

Bottoms also are compatible with older 

Pioneer plows by simply replacing the 

original bottom beam with Item No. 5565. 

Moldboard Extension 

Long Landside 

Shin 

Frog 

Heel 

Coverboard 


Shareknife 

Kverneland Plow Bottom & Parts 

Designed with grass farmers in mind, the Kverneland plow bottom excels in most 

soils, especially sod, heavy clay and muck-type soil. Extensive field testing shows 

that it pulls 10-15% easier than most other models, providing greater productivity. 

The extra long moldboard has a slower twist, offering a smooth, continuous 

furrow instead of the tearing and buckling often experienced in sod. The result is 

less tillage required before and after planting. In addition, you can wait to plow until 

the grasses are tall enough to provide the benefits of green manure – and still be 

able to turn them under to control weeds in the emerging crop. 

Kverneland bottoms come with reversible point for extended wear on share. 

All wear parts have a special heat treat and last 4 to 6 times longer than 

conventional parts. 

Moldboard 

Share 

Coverboard Bracket 

Reversible Point 

14” RH KV Bottom 

Plow bottoms come complete as shown, including coverboard, 

heel and moldboard extension. 

Plow Bottoms & Accessories 


70505 70506 12” KV Bottom 

70520 70521 14” KV Bottom 

70535 70536 16” KV Bottom 

73411 73412 KV Frog 

73000 73001 12” KV Share 

73002 73003 14” KV Share 

73004 73005 16” KV Share 

53090 63090 KV Reversible Point 

73300 73301 KV Coverboard 

73310 73311 KV Coverboard Bracket 

53387 63388 KV Moldboard Extension 

73280 73281 KV 12” Moldboard 

73286 73287 KV 14”-16” Moldboard 

73250 73251 KV Shin 

73609 73609 KV Long Landside 

73608 73608 KV Short Landside 

73091 73092 Shareknife 

5561 5562 KV Heel 

5565 5565 KV Bottom Beam 

All the necessary bolts are included with the above plow parts.

Oliver & John Deere Bottoms & Parts 

Shin 

Coverboard 

Moldboard 

Landsides 

Plow Bottom Frog 

Plow Bottom with 

Standard Share 

All-American Share 

Heel 

Plow bottoms come complete as shown, including coverboard and heel. 

New bottoms come with All American shares and all the bolts. 

Plow Bottoms 


HS-12-RH HS-12-LH 12” Plow Bottom (Oliver) 

HS-14-RH HS-14-LH 14” Plow Bottom (Oliver 

HS-16-RH HS-16-LH 16” Plow Bottom (Oliver) 

JD-14-RH JD-14-LH 14” Plow Bottom (John Deere) 

Shares 


R-12-R N/A 12” standard share - full cut - 2 bolts 

R-12-S N/A 12” standard share - narrow cut - 2 bolts 

HS-111 HS-408 12” standard share - full cut - 3 bolts 



HS-142 HS-442 14” standard share - narrow cut 

NB-12-R NB-12-L 12” All American share - full cut 



Shares can also be purchased in a carton of six. 

Moldboards 


HS-137 HS-403 12” Moldboard - Oliver 



HS-14-R HS-14-L 14” Moldboard - John Deere 

Coverboards 


HS-151 HS-416 Coverboard 

Landsides 

New offset for better alignment. Standard on all plows. 


HS-135 HS-411 Short Landside - use on gang, 

footlift, or landside wheel plows 

HS-140 HS-414 Long Landside - use on sulky plow 

or walking plow 

Shins 


HS-205 HS-406 Shin - Oliver 

8195-A A-12435 Shin - John Deere 

Heels 


HS-115 HS-413 Heel 

Plow Bottom Frogs 


HS-101 HS-409 Oliver Frog 

JD-101 JD-409 John Deere Frog 


22

Pioneer Harrows 

Spring Tooth Harrows 

Ideal for seedbed preparation and weed killing, our spring tooth 

harrow is built for trouble-free performance and reliability. 

Crumbler 

Save time in the field by completing two steps in one pass with 

the new Pioneer Crumbler in conjunction with your Spring Tooth 

Harrow. The 17” rollers will easily crumble the clods as you till 

the ground. Each roller rotates individually, preventing drag 

when turning. 

New Harrow Cart 

This new cart features large wheels for a smoother ride 

and attaches easily to any Pioneer Harrow. 

8’ Spring Harrow with Crumblers and Harrow Cart 


3’ Spring Harrow 

with Raker Rods 

Harrow Features & Specifications 

Sizes: Available in 3’ and 4’ sections up to 16’ wide 

Spring Teeth: 8 teeth per 3’ section, 11 teeth per 4’ section 

Heat treated and tempered 

Tooth Clamps: Bolt on clamps for secure tooth position and easy spacing 

Lever Assembly: Easy to use lever to set depth for various conditions 

Runners: Extra wide heat treated swiveling runners insure good 

flotation and easy turning 

Raker Bar: Heat treated bars break up clods and eliminate ridging 

Crumblers: Top quality greaseless bushings 

Harrow Cart Features & Specifications 

• Safely ride behind your harrow instead of on top 

• Maintains flexibility of sections 

• Attaches to any Pioneer Harrow 

• Overall width, outside of wheels = 35”

Reversible Point 

Harrow Spring 

Spring Tooth Harrows with Drawbar & Crumbler Attachment 


4403 3’ Cut - 1 Section 373# 

4404 4’ Cut - 1 Section 471# 

4406 6’ Cut - 2 Sections 743# 

4408 8’ Cut - 2 Sections 938# 

4409 9’ Cut - 3 Sections 1113# 

4410 10’ Cut - 3 Sections 1210# 

4412 12’ Cut - 3 Sections 1409# 

4422 12’ Cut - 4 Sections 1487# 

4416 16’ Cut - 4 Sections 1878# 

Crumbler 


4360 3’ Crumbler Attachment 206# 

4361 4’ Crumbler Attachment 275# 

Spring Tooth Harrows with Drawbars & Raker Rods 


4303 3’ Cut - 1 Section 188# 

4304 4’ Cut - 1 Section 223# 

4306 6’ Cut - 2 Sections 373# 

4308 8’ Cut - 2 Sections 442# 

4309 9’ Cut - 3 Sections 558# 

4310 10’ Cut - 3 Sections 592# 

4312 12’ Cut - 3 Sections 665# 

4322 12’ Cut - 4 Sections 747# 

4316 16’ Cut - 4 Sections 886# 

Spring Tooth Harrows with Raker Rods- Single Sections 


4300 3’ Cut - Single Section 171# 


Spring Drawbars Only - Including Clevises 


4323 3’ Drawbar for Single Section 


4326 6’ Drawbar for Two Sections 


4329 9’ Drawbar for Three Sections 



4342 12’ Drawbar for Four Sections 

4336 16’ Drawbar for Four Sections 

Points & Springs 


4301 Harrow Spring w/clamp 

4302 Reversible Point 

Harrow Cart 


4200 New Item Harrow Cart 140# 


24

Pioneer Harrows (Continued) 

Spike Tooth Harrows 

Pioneer’s spike tooth harrow is designed for leveling, 

weeding and seedbed preparation. Pull it with ponies, 

horses, mules or a tractor. High quality materials and 

craftsmanship ensure years of performance. 


Sizes: Available in 5’ and 6’ sections up to 18’ wide 

Spike Teeth: 35 teeth per 5’ section, 40 teeth per 6’ section. Spikes are 

diamond shaped, hardened with a reinforced shoulder and 

stay sharp longer 

Open End Construction: Helps prevent clogging, eliminates overriding 

and allows complete flexibility 

Lever Assembly: Easy to use lever to set depth for various conditions 

Tubular Frame: Rigid enough to hold the teeth in position, flexible 

enough to follow uneven terrain 

Drawbar: Steel drawbars have a chain pull to eliminate bent rods 

Drawhooks: Designed to stay hooked even when trailed over the 

roughest ground 


10’ Spike Tooth Harrow 

Specify: Item No., Size and Description. 

Spike Tooth Harrows with Drawbars 


4115 5’ Cut - 1 Section 128# 

4116 6’ Cut - 1 Section 137# 

4120 10’ Cut - 2 Sections 257# 

4122 12’ Cut - 2 Sections 277# 

4125 15’ Cut - 3 Sections 391# 

4128 18’ Cut - 3 Sections 422# 

Spike Tooth Harrows - Single Sections 




Spike Drawbars Only - Including Clevises 








Spikes 


4100 Harrow Spike 

Harrow Cart 


4200 New Item Harrow Cart 140#

Pioneer Horse Drawn Wagon Gears 

Custom Beds 

You can learn about our many sizes 

and styles of wagons on the next 

couple of pages. However, If you 

don’t see what you are looking for 

don’t hesitate to contact us and 

someone will help you design 

a bed to meet your needs. 


26

Pioneer Horse Drawn Wagon Gears 

Whether you’re a farmer, hobbyist, or providing commercial wagon 

rides, Pioneer can design a complete custom wagon just for you. 

Choose from four sizes ranging from ½-ton to 6-ton capacity. Select 

the proper gear and wagon bed, then complete the package with 

suitable options and accessories. 


• Behind the axle auto-type steering 

• Adjustable tie rods 

• Short turning and true tracking even at high speeds 

• Convenient rear hitch 

• Grease fittings at all pivot points 

• Heavy duty reinforced spindles 

• Tapered roller bearing wheel hubs 

• Oscillating coupling pole 

Bolster Springs 

Single spring bolsters fit our 1/2 and 1 ton models. 

Double spring bolsters fit our 3 and 6 ton models. 

All sizes have the option of light, medium, or 

heavy color coded coil springs. 

Bolster Springs for 1 Ton gears 

Min. Max 

Light 500# 1400# 

Medium 800# 2000# 

Heavy 1600# 4400# 

Bolster Springs for 3 & 6 Ton gears 

Min. Max 

Light 1000# 2800# 

Medium 1600# 4000# 

Heavy 3200# 8800# 


Beam Standards 

Beam standards are used on 1/2 

and 1 ton models without bolster 

springs. They come standard on 

3 and 6 ton models. 

Wheels 

Select the proper wheel 

for your application. 

• Air Tires 

• Steel Wheels 

• Wood Wheels* 

Or, convert your wagon to a sled 

using our bolt on sled runners. 

*Wood Wheels are not interchangeable 

with steel wheels, air tires or sled runners. 

Brakes 

Mechanical brakes on the rear 

axle are available on all Pioneer 

horse drawn wagon gears. 

Hydraulic brakes on 2 or 4 wheels 

are available on 1, 3 and 6 ton 

models. All brakes are factory 

installed, tested and adjusted. 

Retractable Steps 

Retractable steps for easy entry. 

Wagon Size Width 

1 Ton 21-1/4” wide 

3 Ton 27-1/2” wide 

6 Ton 31-1/2” wide 

Wagon Beds 

Choose from our many styles of beds including the traditional 

Flatbed, Utility, Trailway, Classic, SUV or Coach. Every bed is 

constructed from quality dried poplar wood and features 

powder-coated steel hardware. Standard bed colors are red, 

green, or clear varnish. Custom colors and automotive finish 

are available upon request. Accessorize your wagon with a canvas 

cover*, cushion seats, LED lights, and whip socket. 

*Canvas covers feature a 5-year limited warranty 

Trailway Utility 

SUV 

Classic 

Coach 

Tongues 

Choose from 4 tongue options including: 

• Ash Hardwood 

• All Steel Horse 

• All Steel Horse/Tractor Combination 

• Standard Steel Tractor 

Length from hitch pin to neckyoke: 

Mini = 73” 

Pony = 85” 

Haflinger = 102” 

Draft = 121” 

Shafts 

Drive your single horse or pony with a set of shafts. 

Our shafts feature all steel construction for safety and durability. 

Length from singletree Distance between pipes 

to front of shaft pipe: at narrowest point: 

Mini = 46” Mini = 15” 

Pony = 60” Pony = 19” 

Cob = 70” Cob = 22” 

Haflinger = 76” Haflinger = 23” 

Draft = 87” Draft = 27”

Pioneer Wagon Beds 

3-Ton Classic Wagon with accessories 


• Angled footboard prevents strain when driving 

• Wider and heavier cushion for additional comfort 

• Spacious cargo box underneath seat cushion 

• Redesigned armrests prevent fatigue on long trips 

• New design on dash for added elegance 

• Rear armrests for additional safety 

• Gas shocks for a smoother ride 


28

Pioneer 1/2 Ton Wagon Gear 

1/2-Ton Utility Wagon with 47” pony. 

When ordering a Pioneer Wagon first choose the gear you want 

then add accessories as needed. Gears come with wheels, and a coupling 

pole. 

1/2-Ton Gears 


2401 Gear with 4.80-8 air tires (16” o.d.) 81# 

2402 Gear with 16” semi pneu. wheels 125# 

2403 Gear with 16” steel wheels 117# 

2404 Gear with 16” wood wheels/rubber tire 97# 

2405 Gear with 16” wood wheels/steel tire 85# 




2411 Mechanical Brake Pedal - w/hardware 

2414 Shafts - mini size 

2412 Shafts - pony size 




2416 Wood Tongue with hardware - mini size 

2417 Wood Tongue with hardware - pony size 

2419 Wood Tongue Adapter only 

2423 Steel Tractor Tongue 

2418 Bolster Springs - 1 set of four units 

2424 Beam Standards - 1 set of four units 

2426 Sled Runners - set of four 


2434 16” air tire/wheel - each 

2435 16” steel wheel - each 

2436 16” semi-pneumatic wheel - each 

1/2-Ton Wagon Beds 


2420 Utility Bed 170# 

2421 SUV Bed 230# 


This compact wagon is designed 

especially for ponies and haflingers 

and is a good choice for young 

teamsters or beginners of any age. 

Useful for many purposes, like going 

to town, pleasure driving and trail rides. 


• Bed size 40” wide x 70” long 

• Available in red, green or clear varnish 

• 1/2 ton load capacity 

• Overall width of gear (outside of tires) - 37” 

• Length adjustment of gear 

(axle to axle) - 44-1/2” to 56-1/2” 

1/2-ton gear with air tires, SUV bed, optional shafts, springs, and brakes 



2428 LED Lights - installed with battery 

2458 Marker Lights 


2431 Automotive Paint 

2438 Automotive Clear Finish 

2433 Wood Stain w/Auto Clear Finish 


2341 Cup Holder 

2430 Safety Flag 


2429 Assembled - gear, bed and brakes

Pioneer 1 Ton 

Wagon Gear 

Built like the big wagons but in a more 

manageable size, this wagon can be pulled 

with a single horse, team of ponies or a small 

tractor. A great multi-purpose wagon, hobby 

farmers and small landholders will find it 

useful for hauling wood, hay, grain and 

produce or utilizing it for trail rides and 

pleasure driving. Build your own bed or 

choose one of ours. A wide variety of 

options are available to help you 

customize your wagon. 


• Bed size 56”wide x 108”long 


• 1 ton load capacity 

• Overall width of gear (outside of tires) 51” 

• Length adjustment on gear (axle to axle) 66”- 96” 


then add accessories as needed. Gears come with wheels, and a coupling 

pole. 

1-Ton Gears 


9527 Gear with 5.30-12” air tires 232# 

9528 Gear with 175/80-13” air tires 290# 

9500 Gear with 4”x20” steel wheels 272# 


9517 Gear with 24” wood wheels/steel tire 239# 

9518 Gear with 24” wood wheels/rubber tire 247# 





9573 Hydraulic Brakes on all 4 wheels 

9574 Mechanical Brake Pedal - w/hardware 

9575 Hydraulic Brake Pedal - w/master cylinder 





9549 Wood Tongue - w/hardware - haflinger size 



9542 Bolster Springs - 1 set of 4 units 

9539 Beam Standards - 1 set of 4 units 

9096 Sled Runners - set of four 


9590 Rubber bolted to steel wheels - each 

9591 5.30-12” air tire wheel - each 

9592 175/80-13” air tire wheel - each 

9505 Automotive Paint on wood wheels 

9506 Automotive Clear Finish on wood wheels 

9507 Wood Stain w/Auto Clear Finish on wood wheels 

1-Ton Trailway Wagon with team of Haflingers (14.2 hands) 

1-Ton Wagon Beds 


9600 Utility Bed 420# 

9601 Trailway Bed 470# 

9602 Coach Bed 520# 

9605 SUV Bed 460# 

9608 Classic Bed 555# 

9620 Flat Bed 360# 



9647 3’ Upright 


9645 Upright Bracket 

9603 Cushions on Trailway benches 

9609 Cushions on Classic benches 







9611 Canvas Top on Classic bed 

9612 Canvas Top on Trailway bed 


2341 Cup Holder - flat bed mount 

2340 Cup Holder - pipe guard mount 


9670 New Item Storage Cover 

9604 Assembled - gear, bed and brakes 


30

Pioneer 3 Ton Wagon Gear 

3-Ton Classic Wagon with accessories and sled runners 

Pioneer’s 3-ton wagon is ideal for utility work, pleasure driving and trail rides. Designed for light-to 

medium-sized horses and mules, you can pull it with a single horse, team or tractor. Build your own 

bed or choose one of ours. A wide variety of options are available to customize your wagon. 


• Bed size 5’8” wide x11’ or 12’ long 


• 3 ton load capacity 

• Overall width of gear (outside of tires) 64” 

• Length adjustment on 

gear (axle to axle) 78”-110” 


3-Ton Passenger Wagon with pneumatic tires and tractor tongue

The Pioneer Box Bed 

The Pioneer Box Bed comes with spring mounted seat and 

rear end gates. The box is 38” wide x 10’ long. Overall it is 12’ 

long with footboard and rear scoop extension. 


then add accessories as needed. Gears come with wheels, beam standards 

and a coupling pole. 

3-Ton Gears 



3302 Gear with 15”x5” rims 322# 

3303 Gear with 15” rims and used tires 398# 

3304 Gear with 15”x5” rims w/new 6.70 - 15 tires 398# 

3306 Gear with 30” wood wheels w/steel tire 486# 

3307 Gear with 30” wood wheels w/rubber tire 500# 





3322 Hydraulic Brakes on all 4 wheels 

9574 Mechanical Brake Pedal w/hardware 

9577 Mechanical Brake Lever w/hardware 






3325 Wood Tongue w/hardware - draft size 

3326 Wood Tongue w/hardware - haflinger size 

3330 Steel Tongue - draft size 

3331 Steel Horse/Tractor Combo Tongue - draft size 

8734 Lift Spring Kit for Tongue 



3329 Bolster Springs - 1 set of 4 units 

8645 Beam Standards - each 

3334 Chrome Hubcaps - w/hydraulic brakes only 


9095 Sled Runners for gear w/hyd. brakes - set of 4 


3312 Automotive Paint on wood wheels 

3313 Automotive Clear Finish on wood wheels 

3314 Wood Stain w/Auto Clear Finish on wood wheels 

3-Ton Custom Wagon 

3 Ton Wagon Beds 


3340 Utility Bed x 11’ 545# 

3341 Utility Bed x 12’ 590# 

3342 Trailway Bed x 11’ 615# 

3343 Trailway Bed x 12’ 665# 

3344 Classic Bed x 11’ 768# 

3345 Classic Bed x 12’ 818# 

3346 Coach Bed x 11’ 680# 

3347 Box Bed 323# 

3348 SUV Bed x 11’ 600# 

3349 SUV Bed x 12’ 650# 

3360 Flat Bed x 12’ 440# 

3370 New Item Passenger Bed x 14’ 665# 






3351 Cushions on Classic Benches 

3350 Cushions on Trailway Benches 

3372 Cushions on Passenger Benches 







3356 Canvas Top - on Classic Bed 

3357 Canvas Top - on Trailway Bed 

3380 New Item Gas Shocks 





3353 New Item Storage Cover 




32

Shown here is our most popular farm gear (8507-HS) on steel wheels 

with optional mechanical brakes, wood tongue and hayrack. 

6 Ton Farm Gear 

For farmers using steel wheels 

Our heavy duty, field ready 6-ton horse wagon gear 

is built for years of hard use and extra heavy loads. 


• Heavy 2” reinforced spindles 

• Larger bearings on hubs and hitch 

• Extra large 1” spindle nut 

• Heavy duty seal with mud guard 

• Bed size 6’ 6” wide x 14’ or 16’ long 


• 6-ton load capacity 

• Choice of 3 tread widths 

• Choice of 7’, 9’ or 11’ coupling pole 

(See page 34 for ordering information) 


6-Ton Gear designed for the farmer using steel wheels 

When ordering a Pioneer wagon first choose the gear you want then 

add accessories as needed. Gears come with wheels, beam standards 

and a 7’ coupling pole. Tread width is measured center to center on 

wheels. 

6-Ton Gears For Horses 

Model 8507-HN (60” Tread Width) 


8591 Gear with 5-1/2” x 28” steel wheels 682# 

8592 Gear with 8” x 28” steel wheels 738# 

8561 Gear with 15” x 6” rims 510# 


Model 8507-HS (66” Tread Width) 






Model 8507-HW (72” Tread Width) 






Gear Options & Accessories 




8701 Hydraulic Brakes on all four wheels 

9574 Mechanical Brake Pedal w/hardware 

9577 Mechanical Brake Lever w/hardware 



8721 Wood Tongue w/hardware - draft size 

8709 Steel Tongue - draft size 

8702 Steel Horse/Tractor Combo Tongue - draft size 

8734 Lift Spring Kit for Tongue 



8705 Bolster Springs - set of 4 

8645 Beam Standards - each 

3334 Chrome Hubcaps - w/hydraulic brakes only 

8042 7’ Coupling Pole 



9093 Sled Runner - set of 4 

9095 Sled Runner for gear with hyd. brakes - set of 4 


9042 Used 15” highway tire 

9043 Recapped 15” highway tire 

9044 New 9.5L-15 Implement tire 

Seat Bracket Mounting Post 

6-Ton Wagon Beds 

Use Model 8506-HS gear with these beds. 


9626 6’6” x 14’ Utility Bed 715# 

9627 6’6” x 16’ Utility Bed 815# 

9622 6’6” x 14’ Trailway Bed 840# 

9623 6’6” x 16’ Trailway Bed 900# 

9629 6’6” x 14’ Classic Bed 960# 

9630 6’6” x 16’ Classic Bed 1060# 

9640 7’ x 14’ Flat Bed with Treated Floor 580# 





Wagon Bed Options & Accessories 





9654 New Item Seat bracket mounting post 

9632 Cushions on Classic benches 

9631 Cushions on Trailway benches 







9633 Canvas Top - on Classic bed 

9634 Canvas Top - on Trailway bed 

9660 New Item Gas Shocks 








34

Pioneer Tractor Wagon Gears 

These heavy duty wagon gears have heavy duty components 

and are designed take the punishment in all field conditions. 

Choose from 6 to 15-ton capacity. 


• Behind the axle automotive type steering eliminates road 

whip and provides smooth and straight towing 

• Replaceable bushings and thrust bearings on front spindles 

for less maintenance 

• Grease fittings on wheel hubs and all pivot points 

• 38” or 42” Beam spacing 

• Choice of 7’, 9’ or 11’ coupling pole 

When ordering a Pioneer wagon first choose the gear you want then 

add accessories as needed. Gears come with rims (no tires), beam 

standards, 7’ coupling pole and quick-hitch tongue. 

The 12 and 15-ton gears come standard with tandem rear axles. 

6-Ton Gear Model 8506-W (70” Tread Width) 














8531 Gear with 22.5” x 8.25” rims 1048# 

12-Ton Gear Model 8512-T (75” Tread Width) 







12 or 15-ton capacity wagons provide greater stability and 

smoother towing. Perfect for self-unloading forage boxes, 

or large bale beds, they feature rear walking beam axles. 

15-Ton Gear Model 8515-T (76” Tread Width) 






8740 Standard Steel Tongue - 6-ton 

8760 Standard Steel Tongue - 8, 10, 12, 15-ton 

8770 Quick-Hitch Extendible Tongue - 6-ton 

8790 Quick-Hitch Extendible Tongue - 8, 10, 12, 15-ton 

8708 Wood Tongue w/hardware - 8, 10, 12, 15-ton-Draft 

8725 Wood Tongue Adapter only - 8, 10, 12, 15-ton 

8734 Lift Spring Kit for tongue 

8705 6-ton Bolster Springs - set of four 

8706 8-ton Bolster Springs - set of four 

8645 Beam Standards - 6-ton - each 

8845 Beam Standards - 8, 10, 12, 15-ton - each 




9044 New 9.5L-15 8-ply rib implement tire w/tube 

(use on 15” x 6” rim) 

9045 New 11L-15 8-ply rib implement tire w/tube 

(use on 15” x 8” rim) 

9047 New 12.5L-15 8-ply rib implement tire w/tube 

(use on 15” x 10” rim)

Pioneer The Pioneer Work Work Sled Sled 

Custom Sleds are now available: Call for details 

Our work sled is perfect for light hauling of firewood, hay, or farm supplies. 

It also works well for training colts or exercising horses. For greater performance 

in snow and on bare ground, we’ve incorporated all-steel runners that 

provide better float over ruts and rough terrain. 

Add one or two seats for more passengers, 

additional comfort and safety. 


• Bed Size 4’ wide x 7’ long 

• 3/4” exterior plywood floor 

• 36” high, removeable dash with lineholder 

• 12” high, removeable sideboards and endgate 

• Poplar wood construction - sideboards and dashboard 

Pioneer Stoneboat 

Haul light loads and exercise you’re horses with this economical 

runabout sled. Features 6” high steel soled runners, a 4’wide by 

5’ long treated floor and a 24” high removable 

dashboard. Tongue and shafts 

are not available. 

Work Sled with 

optional seat 

and shafts 

Work Sled with optional seat and tongue 

Work Sled Specify Red or Green Color 


4600 Work Sled only - no tongue or shafts 393# 

4659 Sled Tongue w/hardware - draft size 

4660 Sled Tongue w/hardware - haflinger size 

4650 Sled Shafts - draft size 

4651 Sled Shafts - haflinger size 


4652 Sled Seat with cushions 



Stoneboat 


1006 Stoneboat 186# 


36

The Pioneer Liberty PTO Cart 

Motorized cart helps you do more work in less time 

In a class of its own, the Pioneer Liberty PTO cart features a quiet running gas or diesel 

engine to help improve daily productivity on today’s modern horse-powered farms. 

Choose the engine and horsepower to fit your application, from a range of 25 HP to 

75 HP. Field ready and loaded with features, the PTO cart is a proven performer. 

This cart is the result of years of research and extensive on-the-farm testing. It is ideal 

for use with rotary mowers, haybines, hayrakes, tedders, square and round hay balers, 

manure spreaders, corn pickers, picker/shellers, silage choppers and other critical 

farm equipment. 

All Pioneer Liberty PTO carts feature the exclusive adjustable drawbar stabilizer, 

which eliminates balance problems associated with a two-wheeled cart. Our design 

ends swaying, tongue weight problems and PTO shaft damage on sharp turns. It also 

provides better stability when making turns and working on hillsides. This is accomplished 

by first clamping or welding a pin to the tongue of the implement being pulled. Next, 

the implement tongue is hitched to the cart drawbar in the usual manner. Then, the cart 

stabilizer bar is attached to the pin on the implement tongue. Finally, the cart tongue latch 

is disconnected. Using this method, the cart and implement become one single unit and 

will operate and turn like an auto-steer wagon. 


The Pioneer Hybrid PTO Cart 

Do more with less — The new Pioneer 45HP Diesel 

PTO Cart. Featuring a lighter frame this machine is 

large enough to run a small round baler and still 

light enough to use for applications like tedding 

and raking. 


Model LK-45 

Implements Recommended Horsepower Requirements 

25HP 27HP 31HP 35HP 45HP 62HP 75HP 100HP 

7’ Haybine • • • • • • • • 

9’ Haybine • • • • • • 

Tedder • • • • • • • • 

Rake • • • • • • • • 

Small Square Baler • • • • • • • • 

Corn Picker (1 row) • • • • • • • • 

4’ x ‘4’ Round Baler (wet & dry) • • • • 

4’ x ‘5’ Round Baler (wet & dry) • • • 

9’ Discbine • • • 

Chopper (1 row) • • 

Chopper (2 row) • 

TMR Mixer • • 

6’ Tiller • • 

8’ Tiller • 


38

Pioneer Diesel PTO Carts 

Choose the horsepower to fit your application from a range of 45 

HP to 75 HP. Quiet running diesel engines help you do more work in 

less time. Field ready and loaded with features, these PTO carts are 

proven performers. 


• Larger, more accessible fuel tank with visible fuel level 

• Larger platform for extra comfort 

• Rear guard for additional safety 

• Torsion Axles - optional 

• Foot Pedal steering - optional 


The Pioneer Diesel PTO Cart 

Model LD-75 


• 45 HP to 75 HP Diesel Engines 

• Hydraulic Brakes with lock valve 

• Tongue - steel with lift spring 

• Hillside Steering - hydraulically operated 

• Clutch - hand lever belt tightener 

• PTO shaft - 1-3/8 - 6 spline 540 RPM 

• Hydraulic Pump - 8 GPM 

• Hydraulic Outlets - 4 quick disconnect 

• Overall width (outside of tires) = 75” 

• 7 gallon fuel tank

Pioneer Gasoline PTO Carts 


Model LK-35 


• 25 HP to 35 HP Gasoline Engines 

• Hydraulic Brakes with lock valve 

• Tongue - steel with lift spring 

• Hillside Steering - hydraulically operated 

• Clutch - hand lever belt tightener 

• PTO shaft - 1-3/8 - 6 spline 540 RPM 

• Hydraulic Pump - 3 GPM 

• Hydraulic Outlets - 4 quick disconnect 

• Overall width (outside of tires) = 73” 

• 6 gallon fuel tank 

Torsion Axle 


40

Foot Pedal Steering 

Steer your cart while driving your horses. This feature works on all old 

and new Pioneer PTO carts. 

Implement or Tractor Seats 

Choose from our standard or deluxe seats. Add comfort and safety for those 

long days in the field. Both models come with arm rests and front to back 

slides. The deluxe model comes with air ride suspension, lumbar and back 

angle adjustments. 


Tongue Stabilizer 

Shown here connected to an implement 

tongue in work mode. All PTO carts have 

hydraulic adjustable stabilizers. Two bolt on 

stabilizer pins included with each PTO cart. 

PTO carts come with implement seat and your choice of wheels, steel, 

steel with rubber or air tires. One 4” and 6” bolt on 

stabilizer pin. Hydraulic brakes and steering, plus 4-outlet 

hydraulics come standard on all our PTO carts. 

Gasoline PTO Carts 


LK-25 PTO Cart with 25 HP Kohler gas engine 1186# 

LK-27 PTO Cart with 27 HP Kohler gas engine 1186# 

LK-31 PTO Cart with 31 HP Vanguard gas engine 1245# 

LK-35 PTO Cart with 35 HP Vanguard gas engine 1245# 

Diesel PTO Carts 


LK-45 Hybrid PTO Cart with 45HP Kubota 

water cooled diesel engine 1807# 

LD-62 PTO Cart with 62HP Deutz 

air cooled diesel engine 2025# 

LD-75 PTO Cart with 75HP Deutz 

air cooled diesel engine 2073# 



9142 Rubber Torsion Axle for LK Carts 

9143 Rubber Torsion Axle for LD Carts 

4643 Standard Tractor Seat 

4644 Deluxe Tractor Seat 

4641 Standard Tractor Seat - instead of implement seat 

4642 Deluxe Tractor Seat - instead of implement seat 

9154 Seat Bracket for tractor seat 


9136 Footpedal Steering Kit 

9180 4” Stabilizer Pin 

9181 6” Stabilizer Pin 

2326 Plastic Toolbox 




9127 Steel Tongue - replacement 

9128 New Item Steel Tongue - offset for 3 or 5 horses

Photo Courtesy of Horse Progress Days 

The Pioneer Four-Wheel Diesel PTO Cart 


Engine: 80 HP to 120 HP air cooled Deutz Diesel 

or install your own engine. 

Clutch: Reduction gear clutch mounts directly 

to engine, eliminating all belts and pulleys. 

Dual PTO shafts provides both 540 and 1000 RPM. 

Gear: Front axle pivots for better flotation 

over ruts and rough terrain. Comes with 

hydraulic brakes on all four wheels. 

Steering: All four wheels steer together for 

more precise control on hillsides and row 

crop applications. 

Hydraulics: 8 GPM pump with four 

standard outlets. 

Tongue: Steel tube with lift spring that 

eliminates all tongue weight. 

Platform: Elevated and spacious for comfort 

and visibility. Controls are all within easy reach 

of the operators seat. 

Dimensions: Overall width (outside of tires) 77” 

Overall length (outside of tires) 78” 

Four-Wheel PTO Carts 


4W-75 75 HP PTO Cart 2625# 

4W-100 100 HP PTO Cart 2775# 

4W-116 116 HP PTO Cart 2880# 

Add more versatility for your Pioneer PTO Cart 

This unit is compatible with all Pioneer PTO cart models. 

Use it with your 3pt tiller or any other 3pt hitch applications. 

3 Point Attachment for PTO Carts 


4690 3 Point Attachment 905# 


42

Pioneer Neckyokes, Doubletrees & Hardware 

From small ponies to large draft horses, Pioneer has a neckyoke and doubletree to fit your needs. 

Wood neckyokes and doubletrees are made from select hardwoods, handcrafted and finished 

to perfection. These elegant wood neckyokes and doubletrees look great in any application. 

Our steel neckyokes and doubletrees are designed to take the abuse of extra heavy loads. 


Wood Neckyoke with Eyebolt 

Wood Neckyoke with Ring 

Steel Neckyoke with Eyebolt 

Steel Neckyoke with Ring 

Wood Singletree 

Light Steel Singletree 

Heavy Steel Singletree 

Neckyoke End Singletree Hook 

Neckyoke Ring Center with Plates 

Evener Clevis Heel Chain Clevis

Middlering 

Wood Doubletree 

Heavy Steel Doubletree 

Light Steel Doubletree 

Singletree Center Slip Hook 

Jockey Stick 

Pony size 26” to 30”, Haflinger size 34” to 40”, Draft size 40” to 48” 

Specify length on all neckyokes and doubletrees 

Specify Red or Clear Varnish on wood neckyokes and doubletrees 

Wood Neckyokes 


2130 Wood neckyoke w/ring 34”, 36”, 38”, 40”, 42”, 44” or 48” 

2131 Wood neckyoke w/eyebolt 34”, 36”, 38”, 40”, 42”, 44” or 48” 

2132 Pony wood neckyoke w/ring 26” or 30” 

2133 Pony wood neckyoke w/eyebolt 26” or 30” 

Steel Neckyokes 


2064 Steel neckyoke w/ring 35”, 38”, 40”, 42”or 48” 

2063 Steel neckyoke w/eyebolt 35”, 38”, 40”, 42”or 48” 

2060 Pony steel neckyoke w/ring 26”or 30” 

2061 Pony steel neckyoke w/eyebolt 26”or 30” 

Wood Doubletrees 

Complete with singletrees and hardware. 


2054 Wood doubletree 34”, 36”, 38”, 40”, 42”, 44”or 48” 

2055 Pony wood doubletree 26”or 30” 

Steel Doubletrees 


2071 Light steel doubletree 33”or 35”, 33” used 

on 3 and 4 horse eveners 

2076 Heavy steel doubletree 38”, 40”, 42”or 48” 

2077 Pony steel doubletree 26”or 30” 

Wood Singletrees 


2020 Wood singletree 24”, 26”, 28”, 30”, 32”or 34” 

2021 Pony wood singletree 20”or 22” 

Steel Singletrees 


2074 Light steel singletree 28” 

2079 Heavy steel singletree 29” 

2078 Pony steel singletree 22” 

Jockey Sticks 


2009 Jockey Stick 40”, 46”or 52” 

2007 Jockey Yoke 

Hardware Items 


2044 Ring center complete w/plates - 1/2”or 9/16” ring 

2047 Eyebolt center complete with plates 

2045 Plates only - no ring center 

2042 Neckyoke end - 3/8”or 7/16” ring 

2048 Singletree center 

2098 7/16” Standard singletree hook 

2096 1/2” Logging singletree hook 

2052 4” Evener clevis w/ 1/2” bolt - 

used on wood doubletrees 

2099 4” Evener clevis w/ 5/8” bolt - 

used on 3 and 4-horse eveners 

2094 5” or 6” Evener clevis w/ 5/8” bolt 

2053 Heel chain clevis 

2315 Slip Hook - fits heavy steel doubletree 

2097 Middlering - used on standard 3-horse evener 

2095 Heavy Middlering - used on heavy 3-horse evener 


44

Pioneer Eveners & Hitches 

Whether you have small ponies or large draft horses we have an evener to fit your needs. 

Check out our wide variety of eveners and hitches from light to heavy. Featuring all steel 

construction, our eveners will give you years of use in the field. 


5-Horse Beam 

6-Horse Beam 

3-Horse Evener 

4-Horse Evener 

3-Horse Tongue 

Evener on PTO Cart Tongue 

3-Horse Tongue Evener

Photo Courtesy of Horse Progress Days 

Rope & Pulley Hitches 

Switch to tandem hitching to give your horses more room and comfort. Light, yet strong and durable, 

rope hitches make a simple and convenient hitch for all your tandem hitch needs. Our rope hitches come 

complete with 12’ ropes, hooks, pulleys and chains. Evener sold seperately. 

4-Horse Plow Equalizer 

Designed to eliminate side draft on plows when 

using 4-abreast with no horse on plowed ground. 

Works on RH or LH models. Available with or 

without doubletrees. 

4-Horse Neckyoke 

Eveners & Hitches 


2081 3-Horse evener - complete as shown 51# 

2082 3-Horse beam only - 55” 23# 

2083 4-Horse evener - complete as shown 68# 

2084 4-Horse beam only - 65” 28# 

2120 3-Horse tongue evener - complete as shown 63# 

2087 5-Horse beam - 88” 55# 

2088 6-Horse beam - 102” 61# 

2089 4-Horse plow equalizer only - 61” 45# 

2090 4-Horse plow equalizer w/ doubletrees 85# 

2092 4-Horse neckyoke 45# 

Heavy 3 and 4 Horse Eveners for Tandem Rope Hitches 


2066 3-Horse evener - complete 69# 

2067 3-Horse - beam only - 58” 28# 

2068 4-Horse evener - complete 98# 

2069 4-Horse - beam only - 72” 34# 

2072 Heavy 4-Horse plow equalizer only - 67” 53# 

2073 Heavy 4-Horse plow equalizer w/doubletrees 115# 

Tandem Rope and Pulley Hitches 


2111 2-up Hitch - 2-horse 6# 




2118 12’ Replacement rope only 1# 


46

Pioneer Tongues & Accessories 

All Pioneer Wood Tongues are made from select ash hardwood, tapered, planed and chamfered. 

Pioneer Safety Latch 

Hitch safer with the Pioneer Safety Latch. 

Fasten this latch to the end of your tongue and you’ll 

wonder how you ever got along without it. 


Wagon Tongue 2360 

Mower Tongue 2365 

Plow Tongue 5133 

Tongue Caps & Hammerstraps 

Hammerstraps 

Tongue Cap 

6-Ton Wagon Tongue 8721 

1-Ton Wagon Tongue 9549 

Newly Redesigned 6-Ton Steel Combination Wagon Tongue 8702 

Hitch Tongue Cap 

Clevises & Pins 

Swivel Clevis 

Hitch Pin 

Field Clevis 

Twisted Clevis 

Straight Clevis

Mower Parts 

Mower Pitman Plate 

Mower Pitman Wood 

The Pioneer Toolbox 

Ideal for tools and spare parts, the Pioneer toolbox 

is made of cast aluminum and will never rust. Mounting 

brackets and 2 holes in bottom of toolbox make 

it easy to mount to most any piece of equipment. 

The toolbox is 5-1⁄2” wide x 12-1⁄2” long x 4” high. 

Mower Seat 

Bracket Adapter 

Tongues 


2358 Pony tongue - 11’ blank, unpainted (not shown) 

2360 Wagon tongue - 13’ blank, unpainted 

2365 Mower tongue - 14’ blank, unpainted 

8264 Cart tongue - 13’ fitted and painted, 

no hardware (not shown) 

5133 Plow tongue w/neckyoke 

- fitted and painted, w/hardware 

8721 6-Ton wagon tongue 


9549 1-Ton wagon tongue 


8702 6-Ton steel combination wagon tongue 

front part detaches when using tractor 

Tongue Caps 


2059 Pony Tongue Cap w/bolts 

2062 Tongue Cap w/bolts 

2058 Hitch Tongue Cap with bolts 

2057 Safety Latch 

Hammerstraps 


2032 1” wide for 1/2” hitch pin 

2033 1-1⁄2” wide - for 5/8” hitch pin 

2034 1-3⁄4” wide - for 3/4” hitch pin 

2035 With 2 holes - for use w/#2120 3-horse tongue evener 

Clevises & Pins 


2301 3/4” Field clevis - w/ 3/4” pin 

2302 5/8” Straight clevis - w/ 1/2” pin 

2303 5/8” Twisted clevis - w/ 1/2” pin 

2306 1/2” x 4-1/2” Hitch pin 

2304 5/8” x 6-1/4” Hitch pin 

2305 3/4” x 6-1/4” Hitch pin 

2307 1” x 6-1/4” Hitch pin 

2308 1-1/8” x 6-1/4” Hitch pin 

2310 1/2” Swivel clevis 

Mower Parts 


2370 Pitman Wood - McD #7 

2375 Pitman Wood - McD #9 

2400 Pitman Wood - JD 

2380 Pitman Plate - McD #22222 

2381 Pitman Plate - McD #42237 

2382 Pitman Plate - McD 3-Hole 

2383 Pitman Plate - JD 

2384 Pitman Plate - JD 3-Hole 

2389 Mower Seat Bracket Adapter 

2390 New Item Mower Caster Unit 

Toolboxes & Mounting Brackets 


2321 Red Toolbox 

2322 Green Toolbox 

2323 Black Toolbox 

2325 Unpainted Toolbox 

2328 Toolbox Bracket for cart seat post 

2329 Toolbox Bracket for cart guard 

2330 Toolbox Bracket for sulky plow 

2332 Toolbox Bracket for footlift plow 


48

Pioneer Wheels 

New Rolling Machine 


• Entire wheel making process restructured and improved 

• Better uniform wheel circle every time 

• Improved accuracy 

Wheel Rims for Air Tires 


We make steel wheels for all types of equipment, 

from wheelbarrows to tractors. If you don’t see 

what you need let us know and we will quote 

your special requirements. 

When requesting a quote on a custom wheel project 

include as much information as possible, such as 

bolt pattern, rim size, special offset, etc. For special 

bolt patterns we need to know how many bolt holes, 

bolt size, bolt circle, pilot hole diameter and hub 

outside diameter. 

Standard Bolt Pattern Specifications 

Pony 4-Bolt = 4” bolt circle – 2-1/2” pilot 

4-Bolt = 5” bolt circle – 3-5/8” pilot 

Auto 5-Bolt = 4-1/2” bolt circle – 2-7/8” pilot 

5-Bolt = 5-1/2” bolt circle – 4” pilot 

6-Bolt = 6” bolt circle – 4-5/8” pilot 

8-Bolt = 8” bolt circle – 6” pilot 

Standard & Custom Steel Wheels 

Center Plate Welded Wheel Hub 

Seal Race Bearing 

Bolt Circle 

Pilot Hole

Specify Item No., bolt pattern, rim thickness, width and diameter. 

Riveted Spoke Wheels with 3/16” Rims 

Item No. Bolt Pattern Size Weight 

9010 Pony, 4-Bolt 3⁄16”x4”x24” 38# 

9011 4-5-6-Bolt 3⁄16”x5”x24” 43# 

9012 4-5-6-Bolt 3⁄16”x5”x26” 45# 

9013 4-Bolt 3⁄16”x5”x28” 50# 

9014 5-6-Bolt 3⁄16”x5-1⁄2”x28” 52# 

Riveted Spoke Wheels with 1/4” Rims 


9015 4-5-6-Bolt 1⁄4”x5-1⁄2”x26” 59# 

9016 4-5-6-Bolt 1⁄4”x8”x26” 74# 

9017 4-5-6-Bolt 1⁄4”x5-1⁄2”x28” 64# 

9018 4-5-6-Bolt 1⁄4”x6-1⁄2”x28” 69# 

9019 4-5-6-Bolt 1⁄4”x8”x28” 78# 

9020 6-8-Bolt 1⁄4”x6-1⁄2”x34” 98# 

9021 6-8-Bolt 1⁄4”x6-1⁄2”x36” 103# 

9022 6-8-Bolt 1⁄4”x6-1⁄2”x38” 106# 

9023 6-8-Bolt 1⁄4”x8”x38” 125# 

9024 6-8-Bolt 1⁄4”x6-1⁄2”x38” w/cleats 128# 

9025 6-8-Bolt 1⁄4”x8”x38” w/cleats 150# 

Welded Spoke Steel Wheels 


9026 Pony 3⁄16”x4”x20” 30# 

9027 3” x16” Wheelbarrow Wheel w/ 5/8”x 4” hub 13# 

9028 3”x16” Wheelbarrow Wheel w/ 5/8”x 6” hub 13# 

9029 2”x26” Garden Cart Wheel w/ 3/4”x 4-7/8” hub 15# 

9082 5-Bolt hyd. brake 1⁄4”x 5-1/2”x26” 65# 

9083 5-Bolt hyd. brake 1⁄4”x 5-1/2”x28” 69# 

9088 6-Bolt on 5” BC 1⁄4”x 5-1/2”x28” w/cleats - sm. spreader 74# 

9080 8-Bolt 1⁄4”x 6-1/2”x36” w/treadplate rim 102# 

9081 8-Bolt 1/4” x 6-1/2” x 38” w/treadplate rim 105# 

Welded Rims for Steel Wheels 

Item No. Size 

9086 3/16” x4”x20” 

9057 3/16” x4”x24” 

9058 3/16” x5”x24” 

9059 3/16” x5”x26” 

9060 3/16” x5”x28” 

9061 3/16” x5-1/2”x28” 

9062 1/4” x5-1/2”x26” 

9063 1/4” x8”x26” 

9064 1/4” x5-1/2”x28” 

9065 1/4” x6-1/2”x28” 

9066 1/4” x8”x28” 

9067 1/4” x6-1/2”x34” 

9068 1/4” x6-1/2”x36” 

9069 1/4” x6-1/2”x38” 

9070 1/4” x8”x38” 

Wheel Parts 


9050 Pony, 4-5-6-Bolt x 8” center plate only 

9051 6-8-Bolt x 11” center plate only 

9052 8”x4” center ring only 



9055 Pony, 4-5-6-Bolt x 8” welded wheel hub 

9056 6-8-Bolt x 11” welded wheel hub 

Tires on Steel Wheels 


9001 Tire on steel wheels - 24” 

9002 Tire on steel wheels - 5-1/2” x 26” & 28” 

9003 Tire on steel wheels - 8” x 26” & 28” 

9004 Tire on steel wheels - 34” - 36” - 38” 

9005 Cut and bolt sidewalls 

Wheel Rims for Air Tires 


9030 4-Bolt 15”x5” 17# 

9031 5-Bolt 15”x6” 21# 

9032 6-Bolt 15”x6” 21# 

9033 6-Bolt 15”x8” 29# 

9034 6-Bolt 15”x10” 32# 

9035 6-Bolt 16”x6” 23# 

9036 6-Bolt 16”x8” 28# 

9037 6-Bolt 16”x10” 35# 

9038 8-Bolt 15”x10” 32# 

9039 8-Bolt 16”x10” 35# 

9041 8-Bolt 22.5”x8.25” 62# 

9046 5-bolt 15”x6” for hydraulic brake 21# 

Bearings, Races & Seals 

Item No. Description Used On 

LM-11749 Bearing - Outer Older Pioneer plows 

L-44643 Bearing - Inner Pioneer plows, 4-bolt coulters, 

1-ton wagons 

L-44643 Bearing - Outer Newer Pioneer plows, 

4-bolt coulters, 1-ton wagons 

LM-11949 Bearing - Outer Carts, 3-ton, 5-ton E-Z wagons 

LM-67048 Bearing - Inner Carts, 3-ton, 5-ton E-Z wagons 

LM-67048 Bearing - Outer 6-8-10-12-15-ton wagons, 

HD carts 

LM-48548 Bearing - Inner 6-ton wagons, HD carts 

LM-48548 Bearing - Outer HD 6-ton farm wagons 

LM-501349 Bearing - Inner HD 6-ton, 8-12-ton wagons 

LM-603049 Bearing - Inner 10-15-ton wagons 

342-A Bearing - Inner Reliable wagons 

14137-A Bearing - Outer Reliable wagons 

LM-11710 Race - Outer Older Pioneer plows 

L-44610 Race - Inner Pioneer plows, 4-bolt coulters, 

1-ton wagons 

L-44610 Race - Outer Newer Pioneer plows, 

4-bolt coulters, 1-ton wagons 

LM-11910 Race - Outer Carts, 3-ton, 5-ton E-Z wagons 

LM-67010 Race - Inner Carts, 3-ton, 5-ton E-Z wagons 

LM-67010 Race - Outer 6-8-10-12-15-ton wagons, 

HD carts 

LM-48510 Race - Inner 6-ton wagons, HD carts 

LM-48510 Race - Outer HD 6-ton farm wagons 

LM-501310 Race - Inner HD 6-ton, 8-12-ton wagons 

LM-603011 Race - Inner 10-15-ton wagons 

332 Race - Inner Reliable wagons 

14276 Race - Outer Reliable wagons 

CR-12411 Seal Plows, coulters, 1-ton wagons 

CR-16069 Seal Carts, 3-ton, 5-ton wagons 

CR-17617 Seal 6-ton wagons, HD carts 

CR-17618 3-Lip Seal 6-ton wagons, HD carts 

8728 3-Pc. Seal HD 6-ton farm wagons 

8729 Replacement Rubber HD 6-ton farm wagons 

CR-20044 Seal 8-12-ton wagons 

CR-22392 Seal 10-15-ton wagons 

CR-22870 Seal Reliable wagons 


50

Pioneer Patio Seats 

The same seat used on our popular carts are now available for your backyard and patio. 

These seats are 44” wide and are available in red, stain or clear varnish. Accented with 

powder coated black hardware, this classic design is right at home in most any setting. 

Custom Engraving 

Have your seat back custom engraved with your 

name or a picture of your choice. Above are some 

examples of what can be done. 


This patio seat with steel base easily 

bolts to any existing wagon or buckboard 

for additional comfort and safety. 

Spring & Spring Bracket 

Patio seat with wood base and engraved back rest and custom stain finish. 

Patio Seats 


4610 Patio Seat w/wood base 

4611 Patio Seat w/steel base 

4626 Custom Engraved Seat Back 


4622 Wood Stain 

4618 Steel Base only 

4613 Seat only - no springs or brackets 

8110 Cushion Set - black vinyl 

8109 Cushion Set - burgundy vinyl 

4605 1-1/4” Standard Seat Spring 

4607 1-1/2” Heavy Seat Spring 

4606 Seat to Spring Bracket 

8120 Seat Cover

Pioneer Dealer Network 

Pioneer has a large dealer network throughout the 

United States and Canada plus in some foreign countries. 

Even though you are welcome to buy directly from us, we 

encourage you to buy from your local dealer. This will usually 

save you money. Contact us to locate a dealer near you. 

Pioneer Equipment Inc. does not maintain an official 

website. Any Pioneer Equipment displayed or sold via the 

internet is done so by dealers or individuals. 

Ordering 

To help us process your order quickly and accurately be sure to: 

• Use the enclosed order form. If you need additional space 

photocopy the order form or use a blank sheet of paper. 

• Type or print clearly and fill in all requested information. 

Be sure to use item numbers. 

• It is important that you give us your correct ship to street 

address. UPS or truck shipments cannot deliver to P.O. Boxes. 

• Include your home and work phone numbers in case we need 

to contact you about your order. 

Truck freight shipments need a phone number 

to schedule delivery. 

• Make checks payable to Pioneer Equipment, Inc. 

• We accept all major credit cards 

Returning Merchandise 

• If you receive merchandise damaged, defective, 

you are not satisfied with it in any way, or simply 

decide you do not want it, you may return it within 

30 days for a full refund. 

• Send us a note explaining why you want to return 

it and whether you want an exchange, refund 

or substitute. 

• Be sure to include your name, address, 

invoice number, and the date you received the 

merchandise. We will then contact you with 

details for returning the merchandise. 

NOTE: The information contained in this catalog is 

general in nature and is not intended for specific 

application purposes. Pioneer reserves the right to 

change the specifications and information shown 

at any time without notice or obligation. 

Shipping 

• All items, unless otherwise noted, are priced F.O.B. 

our shop. This means you are responsible for 

shipping costs. 

• Items over 70 pounds or exceeding UPS size 

requirements ship via truck freight. Some truck 

freight shipments need to be crated to protect 

the merchandise. 

• UPS will not accept any package exceeding 108” 

in length, so items such as wagon tongues have to 

be shipped via truck freight. 

• We have special discounted rates with some 

truck freight lines which save you up to 50% on 

shipping charges. Keep in mind that most truck 

freight companies have a minimum charge per 

shipment of $100.00 and up. 

• Rates vary widely depending on total weight, 

classification and destination. Contact us for 

exact freight and crating charges on your 

shipments. 

• Most items are kept in stock and available for 

immediate shipment. Allow 7 to 10 days for 

delivery. If an item is out of stock we will inform 

you if we expect a lengthy delay. 

Pioneer Equipment Inc. 

16875 Jericho Road • Dalton, Ohio 44618 

888.857.6340 • Fax: 330.857.0296

Distributed Locally By: 

16875 Jericho Road • Dalton, Ohio 44618 

888.857.6340 • Fax: 330.857.0296

The Pioneer Forecart - Aaron Martin Harness

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?