Wire & Cable Termination - Sasu Industrial

www.greenlee.com
Gator ® Plus Dieless Crimping Tools
spECiFiCaTiOns
CK12ID
= ReplacemenT paRT = accessoRy
EK12ID
Ek12id Ck12id
Length 16 7/8" (429 mm) Length 16 7/8" (429 mm)
height 14 3⁄4" (375 mm) height 14 3⁄4" (375 mm)
Weight 14 1⁄2 lb. (6.6 kg) Weight 14 1⁄2 lb. (6.6 kg)
Battery 12 V, 2.6 Ah, NIMH
Battery Charge Time: 1 hour
Capacity *
• Copper Color Coded Lugs and Splices: 4 AWG to 1000 kcmil*
• Aluminum Color Coded Lugs and Splices: 6 AWG to
1000 kcmil*
Dieless Crimping Tool to 500 kcmil (MCM)
Battery-powered and Corded Tool Features
• Two-speed pump advances the ram quickly to start the crimp, reducing
crimp completion time. The ram automatically retracts after the crimp
is complete.
• Retraction stop feature permits the operator to stop the ram retraction at
any point by pulling the trigger. The subsequent crimp cycle starts from
this partially retracted position saving time and battery life.
• Lightweight, featuring an angled pistol grip and a 350° rotating head.
• Flip open crimping head will allow crimping of 4 AWG – 1000 kcmil
copper or 6 AWG – 1000 kcmil aluminum with no dies to change.
• Dieless indent style crimping head does not require interchangeable
crimping dies.
Battery-powered Tool Features
• Includes two batteries, battery charger, carrying case, test gauge
and test slugs.
• Choice of a 120 volt, 230 volt, or 12 volt one-hour battery charger.
Corded Tool Features
• Operates directly from 120 volt 60Hz or 230 volt 50Hz electrical outlets.
No need to charge batteries or worry about running out of power.
• Equipped with 15 foot (5 m) cord. Can be used with extension cords.
• Includes carrying case.
CaT. nO. upC nO. dEsCripTiOn
EK12ID11 20503 Battery-Powered Dieless Crimping Tool, 115 V Battery Charger
EK12ID12 20504 Battery-Powered Dieless Crimping Tool, 12 V Battery Charger
EK12ID22 20505 Battery-Powered Dieless Crimping Tool, 230 V Battery Charger
CK12ID11 20506 Corded Dieless Crimping Tool, 120V
CK12ID22 20507 Corded Dieless Crimping Tool, 230V
03046 03046 120V Charger
03048 03048 12V Charger
03047 03047 230V Charger
07063 07063 12V NIMH Battery
MK20939 20939 EK12ID & CK12ID Carrying Case
*UL and cUL classified with Anderson ® , Blackburn ® , Burndy ® , ILSCO ® , Panduit ® , Thomas & Betts ® , Penn-Union ® and Tyco ® color-coded connectors.
The products listed above are registered trademarks of Anderson ® , Blackburn ® , FCI Burndy ® , ILSCO ® , Panduit ® , Penn-Union ® and Thomas & Betts ® and Tyco ® .
• Dieless crimping head, no dies to lose or replace.
• Patented pressure system automatically changes crimping force
for each connector size and type. Eliminates errors.
• Seven indent profile requires fewer crimps per connector.
• Automatic two-speed pump for rapid advance. Minimizes crimping time
and number of strokes.
• 8-1/2 ton (75.6 kN) maximum crimping force.
• Swivel head rotates 180° for maximum flexibility.
• Includes Pressure Test Kit and carrying case
• Not for use with “C” and “H” taps.
CaT. nO. upC nO. dEsCripTiOn
1989 35955 Dieless Crimping Tool to 500 kcmil (MCM)
36202 36202 Pressure Test Kit includes 30 Test Slugs and Gauge
spECiFiCaTiOns
Capacity * Copper – 4 AWG - 500 kcmil (MCM)
Aluminum – 6 AWG - 500 kcmil (MCM) (see chart on page 201)
Length 22-1/2" (572 mm)
Weight 14.75 lbs. (6.7 kg)
*UL and cUL classified for use with Anderson, Blackburn, FCI Burndy, ILSCO, Penn-Union and Thomas & Betts copper color-coded connectors 4 AWG-500 kcmil
(MCM) and aluminum color-coded connectors 6 AWG-500 kcmil (MCM).
The products listed above are registered trademarks of Anderson ® , Blackburn ® , FCI Burndy ® , ILSCO ® , Panduit ® , Penn-Union ® and Thomas & Betts ® .
Wire & Cable Termination
USA Tel: 800.435.0786
Fax: 800.451.2632
Canada Tel: 800.435.0786
Fax: 800.524.2853
International Tel: +1.815.397.7070
Fax: +1.815.397.9247
211