Wire & Cable Termination - Sasu Industrial

www.greenlee.com
Gator ® Pro CCX Tools
E12CCX
ECCX11
= ReplacemenT paRT = accessoRy
CCCX11
spECiFiCaTiOns E12CCX ECCX
Crimping Force 24,000 lb. (107 kN)
12-Ton
12,000 lb (53 kN) 6-Ton
height 16-1/8" (371 mm) 14-3/4" (375 mm)
Length 13" (330 mm) 12-1/8" (308 mm)
Weight 14 lbs. (6.5 kg) 10.5 lbs. (4.8 kg)
Battery 12V, 2.6 Ah, NIMH 12V, 2.6 Ah, NIMH
Battery Charge
Time
1 hour 1 hour
spECiFiCaTiOns C12CCX CCCX
Crimping Force 24,000 lb. (107 kN)
12-Ton
12,000 lb (53 kN) 6-Ton
height 16-1/8" (371 mm) 14-3/4" (375 mm)
Length 13" (330 mm) 12-1/8" (308 mm)
Weight 14 lbs. (6.5 kg) 10.5 lbs. (4.8 kg)
Operating
Voltage
Crimping dies on page 214-215.
C12CCX11 (120V, 60
cycle AC) C12CCX22
(230V, 50 cycle AC)
CCCX11 (120V, 60 cycle
AC) CCCX22 (230V, 50
6-Ton tools
When used with Greenlee KC22 and KA22 dies in combination with
Anderson ® , Blackburn ® , FCI Burndy ® , ILSCO ® , Panduit ® , Penn-Union ® and
Thomas & Betts ® color-coded connectors, connections up to 600 kcmil
(copper) and 350 kcmil (aluminum) are UL and cUL classified. These tools
also accept Greenlee, Burndy ® , Kearney ® , Blackburn ® , Panduit ® and Thomas
& Betts ® dies used for 6-ton tools. They can drive knockout punches up
through 2" diameter.
12-Ton tools
• When used with Greenlee KC12 and KA12 dies in combination with
Anderson ® , Blackburn ® , FCI Burndy ® , ILSCO ® , Panduit ® , Penn-Union ®
and Thomas & Betts ® color-coded connectors, crimps on connections
up to 750 kcmil are UL and cUL classified. The tools also accept all
industry “U” type dies. These tools drive knockout punches through
5-5/8" diameter.
• Retraction stop feature permits the operator to stop the ram
retraction at any point by pulling the trigger. The subsequent crimp cycle
starts from this partially retracted position saving time and battery life.
Battery-powered and Corded Tool Features
• 350º rotating head adjusts to your work position.
• Lightweight, plus ergonomic angled handle for comfortable, low-stress use.
• Cycles in seconds with two-speed, hydraulic pump, maximizing productivity.
• Automatic retraction when crimping and cutting cycles are complete.
• Use optional CCX blades and adapters (see page 186).
• U.S. Patent #6,206,663, #6,532,790.
Battery-powered Tool Features
• Nickel-metal hydride battery (NIMH) delivers up to 120 cycles per charge
with the ECCX and 40 cycles per charge with the E12CCX.
• Includes two batteries, a choice of either a 120V, 12V, or 230V one-hour
charger and a high-impact molded carrying case.
Corded Tool Features
• Operate directly from 120V 60Hz or 230V 50 Hz electrical outlets.
• No need to charge batteries or worry about running out of power.
• Equipped with 15 foot (5m) cord. Can be used with extension cords.
• Includes a high-impact molded carrying case.
CaT. nO. upC nO. dEsCripTiOn
E12CCX11 11668 12-Ton Battery-Powered 12CCX tool, w/120V charger
E12CCX12 11669 12-Ton Battery-Powered 12CCX tool, w/12V charger
E12CCX22 11670 12-Ton Battery-Powered 12CCX tool, w/230V charger
C12CCX11 11666 12-Ton Corded 12CCX Tool, 120V, 60 Hz
C12CCX22 11667 12-Ton Corded 12CCX Tool, 230V, 50 Hz
ECCX11 07028 6-Ton Battery-Powered CCX tool, w/120V charger
ECCX12 07029 6-Ton Battery-Powered CCX tool, w/12V charger
ECCX22 07030 6-Ton Battery-Powered CCX tool, w/230V charger
CCCX11 01394 6-Ton Corded CCX Tool, 120V
CCCX22 01395 6-Ton Corded CCX Tool, 230V
12274 12274 Carrying Strap
07063 07063 12V NIMH Battery
07146 07146 Carrying Case for E12CCX
01562 01562 Carrying Case for C12CCX
03046 03046 120V Charger
03048 03048 12V Charger
03047 03047 230V Charger
cycle AC) See page 186 for crimping die adapters, cutting blades and knockout punch adapter
Wire & Cable Termination
USA Tel: 800.435.0786
Fax: 800.451.2632
Canada Tel: 800.435.0786
Fax: 800.524.2853
International Tel: +1.815.397.7070
Fax: +1.815.397.9247
185