Hi-Hog Brochure-01103.qxd - Rio Hondo Livestock Supply

BETTER ETTER BY DESIGN ESIGN

2 

Cattle Handling Equipment 

Handling System Design 3 

Parallel Axis Squeeze Chute 8 

Loading Chute 10 

Palpation Cage 11 

PASS Gates 11 

Working Alleys 12 

Crowding Tubs 14 

Calving Equipment 

Calf Tipping Table 16 

Calving /Trimming Chute 16 

Calving Enclosure 17 

Feeders 

Round Bale Feeders 18 

Fence Line Feeders 19 

Multiple Bale Feeders 19 

Panels & Gates 

Heavy Duty Panels & Gates 20 

Corral Panels & Gates 22 

Handy Panels & Gates 23 

Panel & Gate Accessories 24 

Round Pen Panels 25 

Arena Panels 25 

Horse Stalls 

Portable Stalls & Tie Stalls 26 

Box Stalls & Stall Accessories 27 

Rodeo Equipment 

Timed Event - Roping Chute 28 

Rough Stock - Bucking Chute 29 

Bison Equipment 

Table of Contents 

Bison Handling Equipment 30 

Bison Panels & Gates 31 

Cattle Guards 32 

Wellhead Fence 32 

Bleachers 33 

Picnic Tables and Fire Pits 33 

Kennels 34 

Cover photograph by Jamie Richardson, Richardson Ranch, Queen Charlotte Islands.

Cattle Handling Systems - Design 

Better By Design 

For over thirty years, those who demand superior design, craftsmanship, and service 

have turned to Hi-Hog Farm & Ranch Equipment Ltd. At the core of every Hi-Hog 

product is a passion for design and a commitment to set the standards for all others 

to follow. For functionality, durability and dependability, Hi-Hog has no equal. 

Hi-Hog's ability to work with you to find outstanding design solutions is 

unmatched. Their products are designed to be versatile and this versatility provides 

you with exceptional freedom to design a corral or handling system that meets your 

individual needs. With Hi-Hog you are free to design the way you want. 

Over the next few pages you will find several sample designs. These samples 

were selected to demonstrate the versatility of the Hi-Hog system. 

Suggested Cattle Holding Pen Sizes 

Holding Pen Area 

Under 600 lbs 

Under 275 kg 

600 to 1200 lbs 

(275 to 550 kg) 

Over 1200 lbs 

Over 550 kg 

Worked Immediately 14 sq.ft./animal 17 sq.ft./animal 20 sq.ft./animal 

Held Overnight 45 sq.ft./animal 50 sq.ft./animal 60 sq.ft./animal 

Cow/Calf Holding Pen Area 30 cows 40 cows 50 cows 

Worked Immediately 600 sq.ft. 800 sq.ft. 1000 sq.ft. 

10’ x 60’ 10’ x 80’ 10’ x 100’ 

12’ x 50’ 12’ x 67’ 12’ x 83’ 

14’ x 43’ 14’ x 57’ 14’ x 71’ 

Approximate Pen Size 

16’ x 38’ 16’ x 50’ 16’ x 63’ 

(based on 20 sq.ft./cow-calf pair) 20’ x 30’ 20’ x 40’ 20’ x 50’ 

24’ x 25’ 24’ x 33’ 24’ x 42’ 

30’ x 20’ 30’ x 27’ 30’ x 33’ 

36’ x 17’ 36’ x 22’ 36’ x 28’ 

The suggested areas outlined above are extracted from 'Corrals for Handling Beef Cattle' 1994, published by Alberta Agriculture, Food 

and Rural Development, and are based on the research of Temple Grandin, Colorado State University, Department of Animal Sciences. 

3

4 

Cattle Handling Systems - Corral Design 

Low Stress Sorting 

The goal of sorting is to work your cattle as efficiently as possible with a minimum of stress for both you and 

your animals. The most common sorting methods employ a single sorting gate. Over the long run, however, 

the efficiencies of a two-gate system may offset the lower construction costs of the single gate system. 

•Method #1: Two sorting gates are hinged on the center post and the open gates rest at an angle on the opposite side of the alley. 

•This method is commonly used at auction marts becuase it is safe and highly efficient. 

•While the up-front corral construction costs are higher the gains in safety and efficiency are 

tremendous. 

•As described above the gates mounted on the center post will provide much better flow 

both in and out of the sorting pen. 

•The advantage of the double gate system is that the animals do not need to be turned in 

the alley. Working two gates is much less work for the handler and much less stressful on 

your cattle. 

•Method #2: A single sorting gate is hinged on the center post and the open gate rests at an angle on the opposite alley fenceline. 

• The handler is secure because the gate cannot be pushed through by the livestock. 

• The animals flow smoothly into the pen because the livestock can see well into the pen. 

• The downside is the handler is required to first run the animals past the pen and then turn 

them in the alley before returning them to sort into the pen. 

•Method #3: A single sorting gate is hinged on the center post and the open gate latches directly across the alley. 

•If the handler has time to secure the sorting gate securely this gate will be safer than method #4. 

•If the gate is not securely latched however and the handler assumes that the gate is properly 

locked he may place himself in greater danger than he would in Method #4. 

•The sorting gate’s hinge point on the center post is better than when the hinge point is on 

the corner post because the cattle can see further into the pen. 

•The gate locking perpendicular to the cattle flow in the alley is not as good as in Method 

#2 where the gate rests at an angle. When the gate is square to the sorting alley cattle 

sometimes perceive the alley as a dead-end and you may find them turning in the alley 

before they reach the sorting pen. With the gate at an angle the cattle flow into the sorting 

pen will be much smoother. 

•Method #4: A single sorting gate is hinged on the corner post and the open gate swings freely in the alley. 

•An alley wider than your sort gate may be required to allow access for large farm equipment. 

•If access for farm equipment is not required then the wider alley would be a disadvantage 

as the wide alley makes it more difficult to control cattle. 

•Without a post or fenceline to secure the open gate the handler risks being injured by the 

cattle pushing the sorting gate through. 

•The hinge point on the corner post makes it more difficult to sort because the cattle cannot see 

as far into the sorting pen as they can when the gate is hung on the center post (see Method 

#1, 2 and 3). 

For help with your corral or handling system design please call our toll free number 

1-800-661-7002. 

BEST OPTION 

WORST OPTION

SAMPLE CORRAL #1 

This corral is located in relation to an 

existing barn and fence line. The handling 

system is located centrally 

between the barn and the sorting pens. 

The animals enter the corrals from the 

pasture through the sorting alley and 

on into the holding pen with feed and 

water. The cattle return up the sorting 

alley past three sorting pens. Each 

sorting pen includes two gates for safe, 

efficient sorting. From the sorting pens 

the cattle continue back towards the 

pasture where they are redirected 

through the crowding tub, adjustable 

S-alley, palpation cage and into the 

parallel axis squeeze chute. 


This corral is designed for a rancher 

who required both pre-sorting and postsorting 

pens. The cattle are brought 

from the pasture through the sorting 

alley and into a holding pen for feed 

and water. From the holding pen the 

cattle can be easily worked back into 

the sorting alley for pre-sorting. From 

these pens the cattle are brought up into 

the working alley and the handling system. 

This handling system includes a 

load out gate and loading chute off the 

funnel crowding tub. Sorting after the 

squeeze can be easily accommodated 

with this highly functional design. Grid 

based designs are easy to lay-out and 

easy to add-on to. 


This design uses a circular lay-out. 

The cattle are herded along an existing 

fence line and funneled into the core of 

the circle. At the center of the circle are 

a series of gates through which cattle 

can be easily and efficiently sorted. 

The same pens can be used for both 

pre-sorting and post-sorting. This particular 

handling system uses a PASS section 

instead of our standard Palpation 

Cage. This addition provides the 

opportunity to sort-out to a calf tipping 

table. Although circular corrals can be 

extremely efficient, they are not as 

flexible as grid-based corrals when 

you wish to alter or add-on to the layout. 

Cattle Handling Systems - Design 

5

6 

This handling system includes our 

three section funnel crowding tub with 

load-out gate, a rolling door, 21’ of 

adjustable S-alley, an adjustable palpation 

cage, and our parallel axis 

squeeze chute. This, by far, is our 

most popular handling system. 

Cattle Handling Systems - Handling System Design 

CATTLE HANDLING SYSTEM - SAMPLE #1 

Load-Out Gate 


This starter system features a three 

section crowding tub with a 10’ sheeted 10’ Panel 

panel leading into a fixed width alley. 

The alley is made using our 7’ and 10’ 

sheeted straight panels. This alley is 

finished off with our non adjustable 

palpation cage and our parallel axis 

10’ Panel 

squeeze. 

7’ Panel 


This system features a three section 

crowding tub with a 10’ sheeted panel, 

21’ S-alley 

an adjustable 21’ S-alley, an adjustable 

palpation cage, and our parallel axis 

squeeze chute. The adjustable S-alley 

includes an adjustable alley spreader 

with a rolling door. 

10’ Panel 

Funnel Crowding Tub 


This system features a three section 

21’ S-alley 

crowding tub with a 7’ sheeted panel, 

an adjustable 21’ S-alley, an adjustable 

palpation cage, and our parallel axis 

squeeze chute. The adjustable S-alley 

includes an adjustable alley spreader 

with a rolling door 

7’ Panel 

21’ S-alley 




a load-out gate leading to our universal 

21’ S-alley 

loading chute. The working alley 

begins with a rolling door, 21’ of 

adjustable S-alley, another rolling door, 

followed by our adjustable PASS section. 

From the PASS section one can 

sort to our parallel axis squeeze chute 

PASS section 

or redirect calves into our calf table. 

Loading Chute Load-Out Gate 

Funnel Crowding Tub


Load-Out Gate 


Load-Out Gate 

Calf Tipping Table 

10’ Panel 

Cattle Handling Systems - Handling System Design 


36’ U-alley 

7’ Panel 

Loading Chute 

11’ S-alley 

24 U-alley 



a 7’ sheeted panel leading to our U- 

Alley. The working alley begins with a 

rolling door, 36’ of adjustable U-alley, 

followed by our adjustable palpation 

cage, and parallel axis squeeze chute. 


This system includes our three section 

funnel crowding tub with a load-out gate 

leading to our universal loading chute. 

The working alley begins with a rolling 

door, 11’ of S-alley, and 24’ of U-Alley, 

an adjustable alley spreader with rolling 

door, and an adjustable PASS section. 

From the PASS section one can go to 

our parallel axis squeeze chute or redirect 

calves into our calf table. 


This system includes our three section 

crowding tub with a load-out gate on 

the outside and a 7’ straight section 

and a PASS gate on the inside of the 

tub. Use the double gate to load-out or 

the PASS gate to direct calves to a calf 

table. The system is completed with a 

rolling door, 21’ of S-alley, an 

adjustable palpation cage and our parallel 

axis squeeze chute. 

Load-Out Gate 


This mini-system is perfect for the 

small producer working on a tight 

budget. A two section crowding tub 

with a 10’ sheeted panel leading to a 

non adjustable palpation cage and, 

instead of our parallel axis squeeze 

chute we have used our calving/trimming 

chute with automatic headgate. 

Calving Trimming Chute 


This system uses a two section crowding 

tub similar to the one described in 

System #9. In this system an alternate 

rear exit from the tub leads to our universal 

loading chute. This system uses 

a rolling door, 21’ of S-alley, adjustable 

palpation cage, and parallel axis 

squeeze chute. 

7

8 

Highly regarded for its effortless operation, efficient design and superior craftsmanship, 

the Hi-Hog Parallel Axis Squeeze Chute sets the standard for all others to follow. 

Features 

All latches and 

controls can be 

easily operated 

with mitts on. 

Optional head tie bar. 

Neck injection 

access door. 

Superior quality 3/8” double braided nylon 

ropes travel on nylon wheels for years of 

smooth, trouble free operation. 

Side pockets offer a safe and secure 

location to slide a back-up bar. 

Parallel Axis Squeeze Chute 

Designed to work hard so you don’t have to. 

Rear tailgate locks both up and down. The 

responsive rope control frees the handler to 

effectively work their animals flight zone. 

No foot catches. All gaps are minimized 

and side exit panels are sheeted to a 

height of 32” 

100% extra heavy duty steel construction. 

Load bars attach easily to heavy duty squeeze platform. 

Effortless parallel squeeze action draws sides inward and forward 

while keeping your livestock centered and balanced. The fully 

reversible controls are smooth and fast, even with an animal 

in the squeeze. Double ratchet design provides 

continuous width adjustments from 32” down to 12”. 

Grease zerts on all hinge collars. 

Both sides can be opened from the working 

side for sorting or animal access. 

Each side is equipped with four side 

access panels which swing down and out 

of the way for clear, unobstructed access. 

All closed-in panels are sheeted with 14 ga. 

sheet metal and caulked to minimize noise. 

With two lower access panels on each 

side of the squeeze you have greater 

control over where you can access. 

Lower access panels swing up and 

lock securely out of your way. 

Optional Sternum Bar. (not shown) 

Checkerplate floor with traction ribs.

More features... Independent stanchion latches. 

To reduce animal bruising the 

headgate is mounted to the 

squeeze body with shock 

absorbing spring bolts. 

Extra heavy duty timing chain 

for a long working life. 

Top headgate stanchion width 

adjustment. Stanchion opening 

can be adjusted between 

5” and 11”. Three adjustments 

on both sides. 

Safety guards protect the 

headgate latch against 

accidental animal release. 

Bottleneck stanchion design. 

The bottom verticals of the 

stanchion are straight to 

eliminate the possibility of 

choking. The upper verticals 

bottleneck in at 48” height to 

minimize the upward movement 

of the animals head. 

The headgate is sheeted to 

protect your livestock. 

“We use a Hi-Hog squeeze chute with our 150 

Charolais, Simmental cows. The chute gives excellent 

restraint and control and it is fast, simple, safe and 

convenient to operate. It’s also excellent for getting 

calves to suck” 

Brent Jacobson 

Loon Lake, SK 

“The Hi-Hog Squeeze is the best chute I have ever 

used! It’s fast and easy to operate and everything 

works smoothly. Everyone who has been around it 

likes it.” 

Don Eklund 

Shawmut, MT 

“Our Hi-Hog squeeze is safe and easy to operate” 

Terri Tomlinson 

Redwater, AB 

Outside 

Length 

Inside 

Length 

Outside 

Height 

Parallel Axis Squeeze Chute 

Inside 

Clearance 

Base 

Width 

Squeeze sides at full width. 

Headgate swung fully into 

squeeze. 

Outside 

Width 

One handle releases the 

headgate either outward or 

inward, but never both. 

• Pull headgate release towards 

the back of the squeeze to swing 

the headgate 90° into the squeeze. 

• Push headgate release towards 

the front of the squeeze to swing 

headgate 90° out from the squeeze. 

* No risk of hip-lock with 180° swing. 

Auto-catch position is set quickly 

and simply with limiter chain. 

Rope dally cleats 

Headgate handle is mounted on 

the outside frame to provide a 

faster response as well as keeping 

the operator safely out of the 

headgate opening. 

Chain latch 

Head tie chain and pigtail chain 

retainers. 

Grease zerts on hinge collars. 

The bottom headgate stanchion 

comes with three width 

adjustment settings on both 

sides. 

Inside 

Width 

Squeeze sides at minimum 

width. Headgate swung 

fully out from squeeze. 

Item 

Number 

Weight 

(pounds) 

108” 96” 85” 72.5” 40” 58” 32” - 12” 1550 1670 

9

10 

Loading Chute Style Item # Weight 

Portable Loading Chute 75 1,366 lbs 

Stationary Loading Chute 76 1,269 lbs 

Universal Loading Chute 

This chute is all you need to load and unload your livestock. The extra heavy duty loading ramp 

quickly adjusts for secure loading from stock trailers to cattle liners. 

Superior craftsmanship and a 

powder coat finish for unparalleled 

durability and outstanding quality. 

For the safety of your livestock the 

inside of the chute is lined with 

48" of sheet metal to minimize 

injury. The adjustable stabilizers 

provide the ability to accurately 

align the loading chute with the 

trailer. 

Includes adjustable stabilizer 

legs to insure your chute is 

level and stable on any terrain. 

Solid 100% steel construction. 

The loading ramp is made from 1/8" checker 

plate flooring with 1.25" square tubing traction 

bars on 12" center. 

17” 

Loading height easily adjusts from 17” to 51” (no tools required) 

•direct pull point for 

jacking chute up. 

The chute itself, with its included panel hangers, allows you 

to transport up to 34 corral panels. Note: panels should 

be loaded and tied to the chute so their weight is 

balanced ahead of the chute axle axle. 

Equipped with 

standardized 

connectors 

which allow you 

to attach any of 

Hi-Hog’s panels 

or rolling doors 

without the need 

for adapters. 

Panel Type 

Panel Carrying Capacity 

Capacity on 

Panel Hangers 

•extended pull point for 

adjusting ramp. 

Chute comes with a jack for hitching to truck, levelling chute and adjusting ramp. 

51” 

Transportation Kit 

includes a removable 

towing tongue 

with 2” coupler, axle 

and two new 15” 

tires and wheels. 

Capacity 

Inside 

Chute 

Total 

Heavy Duty Panels 14 16 30 

Corral Panels 16 18 34

Palpation Cages 

Hi-Hog’s palpation cages provide a convenient and secure environment for performing preg 

checks or artificial insemination. They’re constructed with 1.9” O.D. high tensile 60,000psi 

tubing. 

• The cage can be accessed from either side. It includes two heavy duty 

66” high gates equipped with spring loaded plunger latches. 

• Gates lock quickly and securely both in the closed position as well as 

across the alley providing a barrier from animals in the alley. 

• Each of the gates on the adjustable palpation cage include a swing 

panel which swings in and locks to create a narrow ‘V’ alley which 

deters calves from turning around. 

• Cage connects directly to squeeze and alley spreaders. 

Item # Description Weight LBS Width Length Height 

80 Straight Palpation Cage 175 35 5/8” 37” 80” 

1560 Adjustable Palpation Cage 200 35 5/8” 37” 80” 

The PASS gate and PASS panel 

offer exceptional flexibility. 

The connectors on these items are the same as 

Hi-Hog’s complete line of panels so they can be 

freely placed where you need them. They have 

been used in load-out alleys, crowding tubs, working 

alleys, sorting alleys, and as a palpation 

cage. Most commonly the PASS gate and panel 

are paired up to make a short adjustable working 

alley with excellent sorting ability. 

• The frame is constructed of high tensile 1.9” 

O.D. 14ga. tubing with 16 ga. sheet metal. 

• The 42” wide by 66’’ high gate comes with a 

plunger latch. 

• Connectors come with a pin and chain. 

PASS section shown in middle 

of S-Alley. The alley has been 

narrowed to work calves. 

Palpation And Sorting Section (PASS) 

PASS gate 

PASS gate shown in open 

position sort calves out of 

S-Alley. 

Straight Adjustable 

PASS panel 

Item # Description Weight LBS Width Height 

85 PASS Gate 120 48” 80” 

86 PASS Panel 93 48” 66” 

S-Alley and PASS section 

set at full width. PASS 

gate shown open. 

11

12 

Working Alleys 

Hi-Hog offers two fully adjustable working alleys: the S-Alley and the U-Alley. The S-Alley provides excellent forward 

movement while the U-Alley turns 60º with each alley section. Hi-Hog also offers special transition alley spreaders 

which allow the operator to combine the S and U-Alleys. All of the alley panels are hung above the ground on 

adjustable alley spreaders. These spreaders allow the operator to quickly adjust and securely lock each alley section 

to fit the size of the cattle being processed. The alley width adjusts from 32” down to 18” and anywhere in between. 

The adjustable panels are 66” high. The stationary panels, on which the elevated walks are hung, are 60” high. 

S-Alley 

The S-Alley was created by Hi-Hog to take advantage of instinctive catttle behaviours. The alternating curves of the 

S-Alley encourage the lead animal to move forward in pursuit of an escape back to the pasture. As the lead animal disappears 

around the curve of the S-Alley the herding instinct of the other 

animals draws them forward. The S-Alley can be set up on 

uneven ground. Any of the spreaders described can be replaced 

with an adjustable alley spreader complete with a rolling door. 

Sample S-Alley C D 

E 

H 

B 

F 

G 

A 

The S-Alley comes in 11’, 21’, 31’, 41’,...etc. lengths. 

Alley Length Item 

Code Description 

11’ 21’ 31’ # 

21’ 

I 

1 1 1 A 1230 Adjustable S-Alley Spreader - Shield left 

- 1 2 B 200 Adjustable S-Alley Spreader - Interior 

1 1 1 C 210 Adjustable S-Alley Spreader - Shield Right 

1 1 2 D 180 Curved Section ‘A’ 

1 1 2 E 190 Curved Suction ‘A1’ 

TIP The S-Alley works well with the first alley section 

- 1 1 F 1340 Curved Section ‘B’ 

curving either way. We have found however, that 

- 

1 

1 

1 

1 

2 

G 

H 

1350 Curved Section ‘B1” 

1405 Elevated A1 Walkway (optional) 

cattle will move with less hesitation if they can see 

clearly into the first section of the S-Alley. For optimal 

performance we recommend the first alley section 

- 1 1 I 235 Elevated B1 Walkway (optional) 

U-Alley 

continue the curve of the funnel section. 

Like the S-Alley, the curve of the U-Alley encourages efficient 

forward movement. The U-Alley is often used in buildings where 

Sample U-Alley 

physical space is limited. This compact working system works 

best when it is set on a hard level surface. The U-Alley is a 

proven performer for safe and efficient livestock handling. The 

U-Alley length comes in 12’, 24’ and 36’ lengths. 

Alley Length Item 

Code Description 

12’ 24’ 36’ # 

1 1 1 J 1430 Adjustable U-Alley Spreader - Shield left 

L 

M 

K 

E 

H 

M 

E 

H 

K 

E 

H 

M 

J 

- 

1 

1 

1 

2 

1 

K 

L 

1410 Adjustable U-Alley Spreader - Interior 

1420 Adjustable U-Alley Spreader - Shield Right 

19’-9” 

1 2 3 E 190 Curved Section ‘A1’ 

1 

1 

2 

2 

3 

3 

M 

H 

1340 Curved Section 12’ 

1405 Walkway - A1 (optional) 

28’-9” 

Combination-Alley 

At Hi-Hog we know that one system will not work for everyone. 

So we’ve made it possible for you to combine our products to 

create a system that will satisfy your requirements. Our U-to-S 

Alley spreaders allow us to combine alley types to ensure your 

system goes where you need it to go. 

Code Item # Description 

P 1235 Adjustable U2S-Alley Spreader - Left 

Q 215 Adjustable U2S-Alley Spreader - Right 

Sample Combination-Alley 

P 

S-Alley 

U-Alley 

Q

Working Alleys - Parts and Accessories 

Curved Panels 

Curved Panel - B Curved Panel - B1 Curved Panel - A Curved Panel - A1 Curved Panel - 12W Curved Panel - 12A Curved Panel - 12B 

Height Item # Weight Height Item # Weight Height Item # Weight Height Item # Weight Height Item # Weight Height Item # Weight Height Item # Weight 

66” 1340 200 lbs 60” 1350 180 lbs 66” 180 200 lbs 60” 190 180 lbs 66 1400 275 lbs 66” 181 236 lbs 66” 1341 236 lbs 

Adjustable S-Alley Spreader 

Shield Left 


Interior 

S-Alley Spreaders 


Shield Right 


w Rolling Door - Left 


w Rolling Door - Interior 


w Rolling Door - Right 

Item # Weight Item # Weight Item # Weight Item # Weight Item # Weight Item # Weight 

1230 190 lbs 200 130 lbs 210 190 lbs 1235 293 lbs 220 375 lbs 215 293 lbs 

Adjustable U-Alley Spreader 

Shield Left 

U-Alley Spreaders & Combination U to S-Alley Spreaders 


Interior 


Shield Right 

Adjustable U to S-Alley 

Spreader: Left 

Adjustable U to S-Alley 

Spreader: Right 

Item # Weight Item # Weight Item # Weight Item # Weight Item # Weight 

1430 275 lbs 1410 175 lbs 1420 275 lbs 1435 155 lbs 1425 155lbs 

Alley Options and Accessories 

30” Alley Spreader 


with swing gate. 


with lift-up gate. 


with rolling door. 

Alley Stop A1 Walkway B1 Walkway 

Item # Weight Item # Weight Item # Weight Item # Weight Item # Weight Item # Weight Item # Weight 

20 40 lbs 30 90 lbs 37 110 lbs 40 200 lbs 170 45 lbs 1405 80 lbs 235 88 lbs 

A rigid frame for main- A rigid frame for main- A rigid frame for main- A rigid frame for main- The alley stop prevents Each walkway section Each walkway section 

taining the alley’s taining the alley’s taining the alley’s taining the alley’s animals from backing includes one tread and includes one tread and 

inside width at 30” inside width at 30”. inside width at 30”. The inside width at 30”. up. It can be mounted three hangers. A1 sec- three hangers. B1 sec- 

Spreader comes with a lift-up gate can be Frame comes with a to any U or S-Alley tions are hung on the tions are hung on the 

hinged gate. 

operated from either rolling door mounted curved panel. The alley inside radius of curved outside radius of 

side using a rope and on smooth ride nylon stop height is panels. 

curved panels. 

pulley system. wheels. 

adjustable. 

13

14 

Crowding Tub 

Hi-Hog’s heavy-duty 20’ diameter, fully reversible crowding tub is constructed with 66” high sheeted perimeter panels. 

These panels are held in position by extra heavy duty overhead tub spreaders anchored with ground stakes. The pivot 

gate comes mounted in its own frame. The hinges are 2-7/8” O.D. x 4” and come with grease zerts for outstanding year 

round performance. In addition, the spring loaded pivot gate latch is rubber coated for a smooth, quiet and secure operation. 

The value of a safe and efficient Crowding Tub is often overlooked. The crowding tub, as a transition tool for moving 

animals from a wide alley into a narrow working alley, is often filled with anxious livestock and the ground is often 

wet and uneven. A well designed tub considers these conditions. 

The Hi-Hog Difference: 

1) Most tub designs include an array of tub spreaders which include large pipes along the ground. With wet or uneven 

ground conditions these rails create a tripping hazard or leg trap for both livestock and the handler. Hi-Hog eliminates 

these rails making the tub safer for livestock as well as insuring the handler never has to worry about tripping over a 

rail as they swing the pivot gate. 

2) Some manufacturers have a gap at the bottom of their tub panels. While they claim this gap may extend the life of 

the tub panel it may also shorten the lives of your cattle. This gap is a leg trap. Hi-Hog removes this hazard by sheeting 

the bottom 48” of the tub with heavy gauge sheet metal. 

3) Most tub designs include a gap between the spreader and the tub panel. If your livestock get their legs up on the 

top rail they can slide along the rail until they fall off the end of the panel into this leg trap. Hi-Hog has welded loops at 

the end of the top horizontal to remove this trap. 

4) Some manufactures offer an open rail pivot gate which presents numurous dangers to both livestock and handler. Hi- 

Hog’s pivot gate is sheeted to protect the handler and to keep livestock focused on finding the exit into the working alley. 

5) Most manufactures offer very limited, if any, design flexibility . Hi-Hog recognizes that ranchers are often faced with 

design challenges that can’t be met with standard tub designs. Hi-Hog components are designed with a common connector 

system. This gives Hi-Hog unmatched design flexibility. With well over 60 crowding tub designs available Hi- 

Hog can build a tub, using standard stock products, to fit your needs. 

Crowding - Parts and Accessories 

10’ Curved Tub Panel Overhead Tub Spreader Pivot Gate & Frame 10’ Straight Tub Panel 

Item # Weight Item # Weight Item # Weight Item # Weight 

230 230 270 45 280 440 240 180 

7’ Straight Tub Panel 7’ Double Gate PASS Gate PASS Panel 


250 130 1370 210 85 120 86 93

# of Tub Sections Code Item # Weight Description 

One Two Three 

1 2 3 A 230 230 10’ Curved Tub Panel 

1 2 3 B 270 45 Overhead Tub Spreader 

1 1 1 C 280 440 Pivot Gate and Frame 

1 1 1 F 250 130 7’ Straight Tub Panel 

845 1,120 1,395 Total Weight in Pounds (lbs) 

Hi-Hog’s Standard Tub Designs 

Crowding Tub with 7’ Straight Tub Panel 

Use: When space or budget restrict the size of your tub this tub 

will provide 180º of cattle movement sending the cattle back in 

the direction they came from. 

Crowding Tub with 10’ Straight Tub Panel 

# of Tub Sections 

One Two Three 

Code Item # Weight Description 




1 1 1 G 240 180 10’ Straight Tub Panel 

895 1,170 1,445 Total Weight in Pounds (lbs) 

Use: When space or budget restrict the size of your tub this layout 

will give you a working alley which runs at 90º from the 

incoming alley. 

# of Tub Sections 

One Two Three 

Code Item # Weight Description 




1 1 1 E 1370 210 7’ Straight Double Gate 

1 1 1 D 1340 200 S-Alley ‘B’ Section 

1,125 1,400 1,675 Total Weight in Pounds (lbs) 

Crowding Tub with Funnel Section 

Use: This is our most popular crowding tub. This tub will provide 

180º of cattle movement. The funnel configuration offers the 

smoothest flow into the working alley. The funnel section can 

be built with either a 7’ sheeted panel or our 7’ double load-out 

gate which gives you the option of loading out of your tub. 

Cattle Handling Tips 

TIP Cattle will move into the working alley most efficiently when the the angle from the incoming alley, through the 

crowding tub and out into the working alley is between 90º and 180º, with 180º being the best. 

TIP Cattle will move from the crowding tub into the working alley most efficiently when they can see one full body 

length into the alley. 

TIP Cattle have a strong desire to stay with the rest of the herd. This is why the S-Alley and the U-Alley are so effective. 

As the first animal moves out of the crowding tub and disappears around the curve of the working alley the herding 

instinct of the other animals drives them to follow their herd mates in order to keep them in sight. 

TIP When running calves from the crowding tub into the alley, instead of narrowing the full length of the alley to the 

width of your calves, leave the first alley spreader fully open. This gives the calves a larger opening to find when they 

are in the crowding tub. You will find your calves enter the alley with much less hesitation. 

15

16 

Calving Equipment 

The Double Header Calf Tipping Table 

With quick catching headgates at both ends of our calf tipping table, one 

can brand on either the left or right side without making any changes to 

the table. Engineered for one operator, this well balanced table will handle 

animals up to 500 lbs, making it the ideal table for branding, ear 

implants, castration, and neck injections. 

• A table to share with your neighbors. 

• Both headgates can be quickly locked open for handling large calves. 

• Quick, safe and simple squeeze action 

• Equipped with convenient tie loops for securing to your alley or 

squeeze. 

• Four spring loaded side access bars swing out of the way providing 

safe, fast access to the full length of your calf. 

Item #56 Weight: 365 lbs 

Calf Alley Lift-Up Gate 

• The rope and pulley system on this 18” 

wide spreader allow the operator to move 

freely when they need to work the calves 

flight zones. 

• Ideal for a one man operation. 

• The spreader includes connectors on both 

sides so that it can be set up at the end or 

in the middle of an alley. 

• The gate can be set up for left or right side 

operation. 

• Chain latches have been mounted at the 

base of the spreader to make it easy to 

securely chain your calf tipping table. 


Calving/Trimming Chute 

This multi-purpose chute is designed for calving or cattle trimming and 

grooming. 

• Multi-purpose chute for 4-H, vets and ranches. 

• Includes head tie bar. 

• Includes four split panels hinged at the headgate which swing independently 

to provide clear access. 

• To restrict animal movement, the chute includes drop pins on the bottom 

split panels which lock into slots on the floor. 

• The upper split panels also come with drop pins that secure them to 

the lower split panels. 

• The upper left panel comes with a chain to latch on to the top right split 

panel to restrict movement. 

• For trimming and grooming simply swing the split panels to the side 

and insert the side poles into one of the two sets of sleeves found in 

the chute floor. 

• Dimensions: 34”W x 96”L x 80H 


Calving/Trimming Chute Parts 

Self Catching Headgate (Calving) Trimming Chute Body Only Two Side Poles Head Tie Bar 


110 215 lbs 120 585 lbs 1380 35 lbs 126 15 lbs

Calving Enclosure 

Designed for safe and efficient calving. The self catch headgate 

with adjustable stanchions is centered so the cow is accessible 

from both sides. The centered headgate is great for getting twins to 

suck, or to get a calf to suck while you milk out on the other side. 

The convenient entrance gates on either side of the headgate 

come with self-locking plunger latches for quick access. The split 

side panels can be swung out to the sides of the enclosure to assist 

in catching the cow and because the split panels hit the side panels 

at an angle the handler can't get trapped. The split gates can 

be easily removed to create a 66" high, 10' x 10' pen. When the 

calving season is over the components can be used elsewhere. 

The side panels extend 2' beyond the front panel to provide added 

stability. Overall size is 10' x 12'. 


Calving Enclosure Parts 

Front Panel (comes with two gates) Self Catch Headgate - Calving (see headgates) 10’ wide x 7’ high Frame & Gate 

Item # Weight Item # Weight Item # Weight 

1145 250 lbs 110 215 lbs 1160 210 lbs 

12’ Left Side Panel Split Panel - Top Left Split Panel - Top Right 


1150 120 lbs 1170 52 lbs 1175 51 lbs 

12’ Right Side Panel Split Panel - Bottom Left Split Panel - Bottom Right 


1151 120 lbs 1171 42 lbs 1176 40 lbs 

Calving Barn Design 

Folding Braces (two braces required) 

Item # Weight 

1180 25 lbs 

“Hi-Hog designed a penning system which 

featured a calving enclosure for my 

21’ x 21’ barn. It has worked out exactly as 

planned and has exceeded my expectations. 

The equipment is easily installed, 

very functional and a dream to operate. I 

recommend Hi-Hog products to every 

operator who believes in less stress for 

themselves and their animals. This is the 

first time in my life that something has 

worked out as planned.” 

Rick Nielson 

Cochrane, Ab 

17

18 

Hi-Hog offers a wide variety of feeders to meet your livestock 

feeding needs. Consult the chart at right to see what types of 

feeders can be created with each feeder style. 

Cyclone Feeder 

Use: A sturdy efficient and economical 

cow/calf feeder. 

Construction: constructed of 1” x 1”, 

0.100 wall square tubing. The stanchions 

project in towards the center of the 

feeder to save on feed. The base of the 

feeder is sheeted to a height of 20” with 

16 ga. sheet metal. Three sections bolt 

together to create a strong, long lasting 

feeder. 

Hurricane Feeder 

Use: A rugged cow/calf feeder. 

Construction: The frame, including the 

outside stanchion on each section are 

constructed of 1.9” OD, 14 ga. high tensile 

steel tubing while the interior stanchions 

are made from 1 1/2” OD, 14 ga. high 

tensile steel tubing. The stanchions project 

in towards the center of the feeder to save 

on feed. The base of the feeder is sheeted 

to a height of 20” with 16 ga. sheet metal. 

Three sections pin together to create a 

rugged cow/calf feeder. All exposed ends 

have been coned to eliminate sharp edges. 

Tornado Feeder 

Use: A rugged bull feeder. 

Construction: The frame and stanchions 

are constructed of 1.9” OD, 14 ga. high 

project in towards the center of the 

feeder to save on feed. The base of the 


16 ga. sheet metal. Three sections pin 

together to create a rugged bull feeder. All 

exposed ends have been coned to 

eliminate sharp edges. 

Tombstone Feeder 

Use: A rugged cow/calf/bull feeder. 

Construction: constructed of 1.9”OD, 12 

ga. for frame and 14 ga. for tombstone 

hoops. 1” OD, 14 ga. is used on the 

interior vertical of the tombstone hoops. 

Two halves pin together to create a single 

hexagonal shaped feeder.The base of the 


16 ga. sheet metal. 

Inside 

Diameter 

Outside 

Diameter 

Feeding 

Positions 

Stanchion 

Width 

Feeder 

Height 

Item 

Number 

Inside 

Diameter 

Outside 

Diameter 

Feeding 

Positions 

Stanchion 

Width 

Feeder 

Height 

Item 

Number 

7’-1” 

8’-6” 

18 

14” 

55” 

960 

Item 

Weight 290 lbs 

7’-1” 

9’-0” 

18 

13 1/2” 

60” 

910 

Item 


Inside 

Diameter 

Outside 

Diameter 

Feeding 

Positions 

Stanchion 

Width 

Feeder 

Height 

Item 

Number 

7’-1” 

9’-0” 

15 

16” 

60” 

920 

Item 


Diameter 9’-0” 

Feeding 

Positions 

Stanchion 

Width 

Feeder 

Height 

Item 

Number 

Item 

Weight 

12 

12” 

49” 

950 

370 lbs 

Feeders 

Round Bale Feeders 

Feeder Style Use Feeder Type 

Calf Cow Bull Round Bale Fenceline Combination 

Cyclone 

Hurricane 

Tornado 

Tombstone 

Slantbar 

Creep 

“We use several Hi-Hog cyclone round bale 

feeders at our auction mart because we know 

they are built to last. We have been extremely 

happy with their performance. In addition to saving 

on feed they are built strong enough to 

stand up to animal and operator abuse, but light 

enough to move easily from pen to pen.” 

Lyle Taylor, owner/operator 

Medicine Hat Feeding Company 

Medicine Hat , Alberta 

“We bought four Hi-Hog hurricane feeders several 

years ago. We have used them with all sizes of 

cattle. They are a very versatile feeder. They 

worked so well we bought nine more to start this 

years feeding program.” 

Garry Schroeder 

Bladinsville, Illinois 

I purchased a Hi-Hog tornado bull feeder 3 years 

ago and we feed our charolais bulls with it. The 

feeder is built very strong and has saved us alot 

of hay. This is the best bull feeder available. 

Jim Jesse 

Langdon, Alberta. 

“Our 75 bison have used our Hi-Hog tombstone 

feeders for several years. They are great feeders 

and they are built bison tough!” 

Rodney Cohey 

White Water Bison 

Branard, Iowa

Slantbar Feeder Panel 

Panel 

Length 

Feeding 

Positions 

Item 

Number 

Weight 

(Lbs) 

6’ 4 970 85 

8’ 5 980 112 

10’ 6 990 142 

12’ 8 1000 175 

16’ 10 1010 300 

Use: A rugged cow/calf feeder panel. 

Construction: 1 1/2” OD, 14ga. for the 

top rail, 1.9” OD, 12ga for the interior 

two horizontal and 1.9” OD, 14 ga. for 

the bottom horizontal and outside verticals. 

The slant bar stanchions are 1 

5/16” OD, 0.133 wall. 

Note: the 16’ panel has 2 3/8” OD 

inside horizontal and the top and bottom 

horizontal are 1.9” OD tubing. 

Features: A double top rail provides 

additional strength. All verticals have 

been coned to eliminate sharp edges. 

Stanchion width: 13 1/2” 

Panel Height: 60” 

Slantbar 

Combination 

Hurricane 

Combination 

Tombstone 

Combination 

Feeders 

Fenceline Feeder Panels 

Hurricane Feeder Panel 

Panel 

Length 

Use: A rugged multi-bale cow/calf feeder. 

Feeding 

Positions 

Item 

Number 

Weight 

(Lbs) 

8’-5” 5 1245 157 

14’-8” 10 1246 266 

Use: A rugged cow/calf feeder panel. 

Construction: All horizontal and lower 

internal verticals are constructed of 2 

3/8” OD, 0.125 wall tubing. The outside 

verticals are 1.9” OD, 12 ga. tubing. The 

interior stanchions are made from 1 1/2” 

OD, 14 ga. tubing. The base of the 


16 ga. sheet metal. 

Features: The stanchions project in 

towards the center of the feeder to save 

on feed. All exposed ends have been 

coned to eliminate sharp edges. 

Stanchion width: 16” 


Tombstone Feeder Panel 

Panel 

Length 

Construction: 1 1/2” OD, 14ga. for the top rail, 1.9” OD, 12ga for the interior two 

horizontals and 1.9” OD, 14 ga. for the bottom horizontal and outside verticals. 

The slant bar stanchions are 1 5/16” OD, 0.133 wall. 

Note: the 16’ panel has 2 3/8” OD inside horizontal and the top and bottom 

horizontal are 1.9” OD tubing. This feeder should be kept full of feed as the panels 

can be pushed out of square when feed gets low. 

Features: A double top rail provides additional strength. All verticals have been 

coned to eliminate sharp edges. 

Stanchion width: 13 1/2” 


Use: A rugged multi-bale cow/calf feeder panel. 

Construction: All horizontal and lower internal verticals are constructed of 2 3/8” 

OD, 0.125 wall tubing. The outside verticals are 1.9” OD, 12 ga. tubing. The interior 

stanchions are made from 1 1/2” OD, 14 ga. tubing. The base of the feeder 

is sheeted to a height of 20” with 16 ga. sheet metal. 

Features: The stanchions project in towards the center of the feeder to save on 

feed. All exposed ends have been coned to eliminate sharp edges. The panels 

pin together to create a rigid corner brace so the cattle cannot push these panels 

out of square when the feeder gets low on feed. 



Use: A rugged multi-bale cow/calf/bull feeder panel. 

Construction: 2 3/8” OD, 0.125 wall for panel frame. 1.9” OD, 14 ga. for tombstones, 

and 1” OD, 14 ga. for the interior vertical on the tombstones. The base of 

the feeder is sheeted to a height of 20” with 16 ga. sheet metal. This feeder 

should be kept full of feed as the panels can be pushed out of square when feed 

gets low. 



Feeding 

Positions 

Item 

Number 

Weight 

(Lbs) 

7’ 2 1050 120 

10’ 3 1060 180 

12’ 4 1070 220 

16’ 6 1080 285 

Use: A rugged cow/calf/bull feeder 

panel. 

Construction: 2 3/8” OD, 0.125 wall for 

panel frame. 1.9” OD, 14 ga. for tombstones, 

and 1” OD, 14 ga. for the interior 

vertical on the tombstones. 



Combination Feeders 

Creep Feeder Panel 

Panel 

Length 

Feeding 

Positions 

Item 

Number 

Weight 

(Lbs) 

10’ 6 1490 76 

Use: A fenceline feeder panel which 

allows calves through to feed while 

restricting access to larger animals. 

Construction: built from 1 1/2” OD, 16 

ga. and 1.9” OD, 14 ga. high tensile 

steel tubing. 

Features: comes with a pin and chain 

at both ends and will connect with any 

Hi-Hog panel or frame & gate. All verticals 

have been coned to eliminate 

sharp edges. The overall length of this 

panel is 9’-11” 



19

20 

Panels and Gates 

All Hi-Hog Panels and Gates come with our universal connectors which allow you complete freedom to combine any of our panels and gates. 

All Hi-Hog Panels and Gates are built from 60,000 psi minimum high tensile steel tubing. 

The actual Panel length, including connectors is 1” less than the descriptive name. (For example; the overall length of a 12’ panel including connectors is 11’-11”) 

The actual Gate length, measured at the outside edge of the gate verticals, is 5” less than the descriptive name. (For example; a 12’ gate is 11’-7” long, allowing 5” of clearance 

on a 12’ opening between gate posts) 

The Heavy Duty Line: designed for use in the heaviest pressure areas such as corrals, handling areas, and confinement. 

Heavy Duty Panels - the narrow spacing of the bottom four bars provides excellent control for calves. 

6 Bar - Heavy Duty Panels 7 Bar - Heavy Duty Panels 

The bottom bar and top three bars 

The bottom bar and top four bars 

are 1.9” OD, 14 ga. 

are 1.9” OD, 14 ga. 

10” 

The two interior bottom bars are 


1.5” OD, 16 ga. 

9” 

1.5” OD, 16 ga. 

9” 

1.5” OD, 16 ga. tubing is used to 


reinforce the top three bars. 

9” 

reinforce the top four bars. 

9” 

1.25” x 3/16” flatbar provides additional 

strength for the bottom four 

6” 



6” 

bars. 

6” 

bars. 

6” 

End verticals are coned to eliminate 

sharp edges. 

6” 


sharp edges. 

6” 

Panels come with a pin & chain on 


both ends. 

both ends. 

Size (L x H) Item Number Weight (lbs) 


6’ x 5’ 810 65 

6’ x 6’ 816 83 

8’ x 5’ 820 85 

8’ x 6’ 826 105 

10’ x 5’ 830 100 

10’ x 6’ 836 131 

12’ x 5’ 840 120 

12’ x 6’ 846 150 

14’ x 5’ 850 140 

14’ x 6’ 856 172 

16’ x 5’ 860 155 

16’ x 6’ 866 196 

Heavy Duty Panels with a Gate 

6 Bar - Heavy Duty Panels with a Gate 7 Bar - Heavy Duty Panels with a Gate 

The bottom bar and top three bars 

are 1.9” OD, 14 ga. 


1.5” OD, 16 ga. 

Gate frame is 1.9” OD, 12 ga. 


reinforce the top three bars. 

9” 



9” 

bars. 

6” 

End verticals are coned to eliminate 6” 

sharp edges. 


both ends. 

Gate comes with 7/8” plunger latch. 

6” 


6’ x 5’ 811 124 

8’ x 5’ 821 141 

10’ x 5’ 831 155 

12’ x 5’ 841 175 

14’ x 5’ 851 200 

16’ x 5’ 861 218 

Constructed of 1.9” OD, 14 

ga. throughout. 

coped 1.5” OD, 16 ga. tubing 

is used for the interior verticals 

for reinforcement. 

Collar hinges come with 13” 

of 1” diameter allthread. 

The end verticals are coned 

to eliminate sharp edges. 

Gates come complete with 

48” of 1/4” chain and chain 

latch. 

The bottom bar and top four bars 

are 1.9” OD, 14 ga. 


1.5” OD, 16 ga. 

Gate frame is 1.9” OD, 12 ga. 

10” 


reinforce the top four bars. 

9” 



9” 

bars. 

6” 

End verticals are coned to eliminate 6” 

sharp edges. 


both ends. 

Gate comes with 7/8” plunger latch. 

6” 


6’ x 6’ 817 83 

8’ x 6’ 827 157 

10’ x 6’ 837 180 

12’ x 6’ 847 202 

14’ x 6’ 857 225 

16’ x 6’ 867 247 

Heavy Duty Gates 

5 Bar - Heavy Duty Gates 6 Bar - Heavy Duty Gates 

9 5/16” 

9 5/16” 

9 5/16” 

9 5/16” 


4’ x 4’ 640 55 

6’ x 4’ 650 70 

8’ x 4’ 660 90 

10’ x 4’ 670 100 

12’ x 4’ 680 120 

14’ x 4’ 690 140 

16’ x 4’ 700 160 

Constructed of 1.9” OD, 14 

ga. throughout. 

coped 1.5” OD, 16 ga. tubing 

is used for the interior verticals 

for reinforcement. 

Collar hinges come with 13” 

of 1” diameter allthread. 

The end verticals are coned 


Gates come complete with 

48” of 1/4” chain and chain 

latch. 

9 5/16” 

9 5/16” 

9 5/16” 

9 5/16” 

9 5/16” 


4’ x 5’ 645 56 

6’ x 5’ 655 76 

8’ x 5’ 665 95 

10’ x 5’ 675 118 

12’ x 5’ 685 142 

14’ x 5’ 695 161 

16’ x 5’ 705 185



All Hi-Hog Panels and Gates are built from 60,000psi minimum high tensile steel tubing. 

The actual Frame & Gate length, including connectors is 1” less than the descriptive name. (For example; the overall length of a 12’ panel including connectors is 11’-11”) 

Frame & Gates are commonly used to segregate animals in an alley or as a pen entrance or exit. 

The Heavy Duty Line: designed for use in the heaviest pressure areas such as corrals, handling areas, and confinement. 

Heavy Duty Frame & Gates - Single Frame 

5 Bar - Heavy Duty Frame & Gates - SF 6 Bar - Heavy Duty Frame & Gates - SF 

Gate construction:1.9” 14 ga. throughout. 

For additional strength the 6’ wide Frame & Gate uses 

coped 1.5” OD, 16 ga. tubing for the interior verticals. 

Frame construction: a 2 3/8” OD, 0.125” wall frame. 

Comes with 7/8” dia. plunger latch and striker plate. 

Size (L x H) Gate Height Item Number Weight (lbs) 

4’ x 7’ 5’ 350 100 

6’ x 7’ 5’ 352 128 


4’ x 7’ 6’ 351 125 

6’ x 8’ 6’ 355 145 

Heavy Duty Frame & Gates - Double Frame - One Piece Construction 

5 Bar - Heavy Duty Frame & Gates - DF 5 Bar - Heavy Duty Frame & Gates - DF 

Gate construction:1.9” 14 ga. 

throughout. 

For additional strength, coped 1.5” 

OD, 16 ga. tubing is used for interior 

verticals. 

Frame construction: End verticals 

and top rails are built using doubled 

up 1.9” OD, 14 ga. Bottom rail is 

2 3/8” OD, 0.125” wall. 

Comes with 7/8” dia. plunger latch 

and striker plate. 


8’ x 8’ 5’ 360 195 

10’ x 8’ 5’ 370 225 

12’ x 8’ 5’ 380 260 

8’ x 10’ 5’ 390 210 


8’ x 8’ 6’ 361 210 

10’ x 8’ 6’ 371 240 

12’ x 8’ 6’ 381 285 

8’ x 10’ 6’ 391 225 

Heavy Duty Frame & Gates - Double Frame - Two Piece Construction 

5 Bar - Heavy Duty Frame & Gates - DF- 2PC 6 Bar - Heavy Duty Frame & Gates - DF- 2PC 


throughout. 



verticals. 




2 3/8” OD, 0.125” wall. 

Frame comes in two pieces to 

accommodate shipping. 



9 5/16” 

9 5/16” 

9 5/16” 

9 5/16” 

9 5/16” 

9 5/16” 

9 5/16” 

9 5/16” 

9 5/16” 

9 5/16” 

9 5/16” 

9 5/16” 


10’ x 10’ 5’ 360 240 

12’ x 10’ 5’ 410 275 

10’ x 12’ 5’ 420 255 

12’ x 12’ 5’ 430 290 

Gate construction:1.9” 14 ga. throughout. 

For additional strength the 6’ wide Frame & Gate uses 

coped 1.5” OD, 16 ga. tubing for the interior verticals. 

Frame construction: a 2 3/8” OD, 0.125” wall frame. 

Comes with 7/8” dia. plunger latch and striker plate. 


throughout. 



verticals. 




2 3/8” OD, 0.125” wall. 




throughout. 



verticals. 




2 3/8” OD, 0.125” wall. 

Frame comes in two pieces to 

accommodate shipping. 



10 1/8” 

10 1/8” 

9 5/16” 

9 5/16” 

9 5/16” 

10 1/8” 

10 1/8” 

9 5/16” 

9 5/16” 

9 5/16” 

10 1/8” 

10 1/8” 

9 5/16” 

9 5/16” 

9 5/16” 


8’ x 8’ 6’ 361 260 

12’ x 10’ 6’ 411 300 

10’ x 12’ 6’ 421 275 

12’ x 12’ 6’ 431 315 

21

22 





The actual Gate length, measured at the outside edge of the gate verticals, is 5” less than the descriptive name. (For example; a 12’ gate is 11’-7” long, allowing 5” of clearance 

on a 12’ opening between gate posts) 

The Corral Line: The narrow spacing of the bars make these panels and gates ideal for confinement of all cattle sizes. 

Corral Panels - the narrow spacing of the bottom four bars provides excellent control for calves. 

6 Bar - Corral Panels 

7 Bar - Corral Panels 

Constructed of 1.5” OD, 16ga. tubing 

1.25” x 3/16” flatbar welded on the 

face of the panel for added strength. 


sharp edges. 


both ends. 


6’ x 5’ 750 55 

8’ x 5’ 760 65 

10’ x 5’ 770 78 

12’ x 5’ 780 93 

14’ x 5’ 790 110 

16’ x 5’ 800 125 


6’ x 6’ - - 

8’ x 6’ 766 75 

10’ x 6’ 776 90 

12’ x 6’ 786 108 

14’ x 6’ 796 125 

16’ x 6’ 806 140 

Corral Panels with a Gate 

6 Bar - Corral Panels with a Gate 7 Bar - Corral Panels with a Gate 





sharp edges. 


both ends. 

Gate comes with a bolt latch 


6’ x 5’ 751 83 

8’ x 5’ 761 95 

10’ x 5’ 771 110 

12’ x 5’ 781 123 

14’ x 5’ 791 135 

16’ x 5’ 801 150 

The top, bottom, and end verticals 

are constructed of 1.9” OD, 

14 ga.tubing 

Interior horizontal are constructed 

of 1.5” OD, 16 ga. 

For added strength 1.25” x 

3/16” steel flat bar is welded on 

alternate faces of the gate. 

Collar hinges come with 13” of 

1” diameter allthread. 

The end verticals are coned to 


Gates come complete with 48” 

of 1/4” chain and chain latch. 


6’ x 6’ 757 88 

8’ x 6’ 767 102 

10’ x 6’ 777 120 

12’ x 6’ 787 138 

14’ x 6’ 797 152 

16’ x 6’ 807 170 

Corral Gates & Corral Frame & Gates 

6 Bar - Corral Gates 

6 & 7 Bar - Corral Frame & Gates 

7 3/8” 

7 3/8” 

7 3/8” 

7 3/8” 

7 3/8” 

9 1/2” 

9 1/2” 


4’ x 4’ 570 50 

6’ x 4’ 580 70 

8’ x 4’ 590 85 

10’ x 4’ 600 100 

12’ x 4’ 610 115 

14’ x 4’ 620 130 

16’ x 4’ 630 150 

7” 

7” 

7” 

9 1/2” 

9 1/2” 

7” 

7” 

7” 





sharp edges. 


both ends. 





sharp edges. 


both ends. 

Gate comes with a bolt latch 

9.5” 

9.5” 

7” 

7” 

7” 

10 1/2” 

9 1/2” 

9 1/2” 

10 1/2” 

9 1/2” 

9 1/2” 

Frame constructed from 1.5” OD, 14 ga. on top and sides. bottom bar is 1.9”OD, 12 ga. 

Gate constructed from 1.5” 16 ga. tubing throughout, with 1.25” x 3/16” flatbar reinforcing. 

Gate comes with 7/8” diameter plunger latch and striker plate. 

End verticals are coned to eliminate sharp edges. (also see calving enclosure F&G) 


8’ x 8’ 5’ 365 144 

10’ x 8’ 5’ 375 165 

12’ x 8’ 5’ 385 190 

8’ x 8’ 6’ 366 154 

10’ x 8’ 6’ 376 177 

12’ x 8’ 6’ 386 205 

7” 

7” 

7” 

7” 

7” 

7” 

10” 

9.5” 

9.5” 

7” 

7” 

7”


All Hi-Hog Panels and Gates come with our universal connectors which allow you complete freedom to combine any of our panels and Spreaders, and Frame& Gates. 



The actual Gate length, measured at the outside edge of the gate verticals, is 5” less than the descriptive name. (For example; a 12’ gate is 11’-7” long, allowing 5” of clearance on 

a 12’ opening between gate posts) 

The Handy Line: designed for portability and low pressure animal confinement 

Constructed of 1 5/16” OD, 16 ga. 

tubing 




one end only. 

Handy Panels 

5 Bar - Handy Panel 6 Bar - Handy Panel 


10’ x 5’ 720 60 

12’ x 5’ 730 70 

Handy Panel with a Gate 

5 Bar - Handy Panel with a Gate 


tubing 




one end only. 


10’ x 5’ 710 90 

Constructed of 1 5/16” OD, 

16 ga. tubing 

1.25” x 3/16” flatbar welded 

on the face of the panel for 

added strength. 

Gate collar hinges come with 

13” of 3/4” diameter allthread. 

Gate comes complete with 

48” of 1/4” chain and latch. 

End verticals are coned to 


Handy Gates 


tubing 




one end only. 


10’ x 5’ 726 68 

12’ x 5’ 736 

Handy Frame & Gate 

80 

5 Bar - Handy Frame & Gate 


tubing 

Gate has a 40 1/2” wide opening 

and a 7’ high frame. 

Gate comes with a bolt latch. 


4’ x 7’ 5’ 1540 65 

5 Bar - Handy Gate Size (L x H) Item Number Weight (lbs) 

4’ x 42” 500 35 

6’ x 42” 510 50 

8’ x 42” 520 60 

10’ x 42” 530 70 

12’ x 42” 540 80 

14’ x 42” 550 90 

16’ x 42” 560 105 

Overhead Spreaders 

Overhead Spreaders - One Piece Construction Overhead Spreaders - Four Piece Construction 

A solid frame suitable for use in the 

heaviest pressure areas. 

Commonly used to give rigidity to 

an alley. 

Constructed of 2 3/8” OD, 0.125wall 

frame. 

Both end verticals come with connectors 

on three sides. 

Can connect any of our panels or 

gates directly to this overhead spreader. 

9 3/4” 

9 3/4” 

9 3/4” 

9 3/4” 

9 3/4” 

9 3/4” 

9 3/4” 

9 3/4” 

7 3/8” 

7 3/8” 

7 3/8” 

7 3/8” 


4’ x 7’ 1660 80 

8’ x 8’ 1670 120 

8’ x 10’ 1680 140 

10’ x 8’ 1690 140 

12’ x 8’ 1700 150 

A solid frame suitable for use in the 

heaviest pressure areas. 

Commonly used to give rigidity to an 

alley. 

Constructed of 2 3/8” OD, 0.125wall 

frame. 

Both end verticals come with connectors 

on three sides. 

Can connect any of our panels or gates 

directly to this overhead spreader. 

Four part construction to accomodate 

shipping 

8 3/4” 

8 3/4” 

8 3/4” 

8 3/4” 

8 3/4” 

9 7/16” 

9 7/16” 

9 7/16” 

9 7/16” 


10’ x 10’ 1700 150 

10’ x 12’ 1710 170 

12’ x 10’ 1730 170 

12’ x 12’ 1740 190 

23

Weld-on Striker Plate 

Panel and Gate Accessories 

Latches: While all Hi-Hog gates come with a chain and latch, a variety of alternative gate latches can be purchased 

separately or custom installed on your gate order. 

Horse back drop latch 

Model Bolt Size Item # Weight 

Medium 7/8” 1334 14 lbs 

Heavy 1 1/8” 1333 20 lbs 

The drop latch is designed for horse 

back operation. 

A 4’ long rod slides through tubing 

welded to the end of the gate at a 45º 

angle. This latch uses gravity and 

requires the operator to lift the latch 

for both opening and closing the gate. 

Horse back lever latch Plunger latch 


Medium 7/8” 1332 20 lbs 

Heavy 1 1/8” 1329 22 lbs 

The lever latch is designed for horse 

back operation. 

This latch employs the same plunger 

latch described to the right except that 

the handle has been repositioned to 

operate as a lever. Simply lift the handle 

and push towards the plunger to 

release the latch. To close the gate 

just push the gate shut and it will lock 

automatically. 

Striker Plates: two styles of striker plates are available for use with any of the above latches. 


Medium 7/8” 1331 4 lbs 

Heavy 1 1/8” 1330 6 lbs 

The ideal latch for frequently used 

gates or for gates that need to be 

closed in a hurry. 

The spring loaded plunger compresses 

when it comes in contact with the 

sloped face of the striker plate and 

then extends into the striker slot to 

provide a safe and solid lock. Use the 

7/8” model on handy gates and the 

1 1/8” on heavy duty gates. 

Bolt-on Striker Plate 

Model Item # Weight 


Weld-on 1650 1 lbs 

Bolt-on 1651 1 lbs 

This plate is designed to be welded 

This plate comes with 4 predrilled 

onto the face of a steel post. Adjust 

7/16” holes. Adjust plunger latch so 

plunger latch so that bolt makes 

maximum penetration. 

that bolt makes maximum penetration. 

Connectors: All Hi-Hog Panels and Gates come with our universal connectors which allow you complete freedom to combine any of our 

Panels, Overhead Spreaders, and Frame& Gates. all our panels and frame and gates can be stack the connectors for our most rigid 3 way connection. 

Overhead spreaders come with a three way connector. All connectors will work with all Hi-Hog products with connectors. 

Connector Links 

This versatile and economical connector 

has largely replaced our three and four 

way connectors. They offer tremendous 

flexibility on uneven ground. Two links are 

required for each connection. 

Size Item # Weight 

1 1/2” x 3 1/2” x 3/16” 1112 0.5 lbs 

3-Way Connectors 

This connector can be used anywhere 

three items intersect. Tubing is coned 


Height Outside Dia. Gauge Item # Weight 

5’ 1.5” 16 ga. 1090 7.0 lbs 

6’ 1.9” 14 ga. 1091 8.0 lbs 

Post to Panel Connectors 

The connector bolts to a wooden 

post. Require 2 per connection. 


Vertical 1110 .8 lbs 

Horizontal 1111 .8 lbs 

4-Way Connectors 

This connector can be used anywhere 

four items intersect. Tubing is coned 


#1331 

#1330 

#1110 #1111 

Plan View Plan View 

Height Outside Dia. Gauge Item # Weight 

5’ 1.5” 16 ga. 1100 7.5 lbs 

6’ 1.9” 14 ga. 1101 8.5 lbs

Equine Panels 

Arena Panels 

Hi-Hog’s versatile, 12’ long and 6’ high arena panel can be used in the construction of round pens or arenas. 

This panel weighs less than our Heavy-duty panels but is stronger than our Corral panels. Constructed with 

60,000 psi high tensile 1.9” 16ga. steel tubing for superior strength. Panels come with pin & chain connectors 

at both ends. Universal connectors allow you complete freedom to combine with any of our panels or frame 

and gates. 

Our panels 

come with top 

rail extensions 

to eliminate the 

potential leg 

traps found on 

some panels. 

Constructed with 

60,000psi high tensile 

1.9” 16ga. steel 

tubing for superior 

strength. 

Mudlegs keep panels 

from sinking. 

Coped vertical stays provide superior 

strength with no sharp edges. 

Round Pens 

Coned verticals 

protect horses 

from sharp 

edges. 

Universal connectors 

give you the freedom 

to combine any Hi- 

Hog product without 

the need for 

adapters. 

Designed specifically for the equine industry, Hi-Hog’s round pen panels represent the perfect balance of 

portability and strength. Both the panels and gates are 6’ high; the height recommended by professional 

trainers. Constructed with 60,000 psi high tensile 1.5” steel tubing for superior strength (all tubing is 16 ga. 

except for the gate frame which is 12 ga.). 

Coped vertical stays provide superior 

strength with no sharp edges. 

Coned verticals 

protect horses 

from sharp 

edges. 

Mudlegs keep panels 

from sinking. 

Gusseted frame 

for strength. 

Our panels come with top 

rail extensions to eliminate 

the dangerous leg traps 

found on other round pen 

panels. 

Comes standard with our 

most popular plunger latch 


Panel comes with pin and chain at one end. Universal connectors give you the freedom to 

combine any Hi-Hog product without the need for adapters. 

Round Pens 

Diameter # of 10’ Panels (Item #2910) # of 6’w x 9’h Gates (Item #2906) Total Weight (lbs) 

40’ 12 1 1149 

50’ 15 1 1416 

60’ 18 1 1683 

70’ 22 1 2039 

80’ 25 1 2306 

25

26 

Portable Horse Stalls 

Item # Description Weight 

4401 10’ x 7’ Portable Stall Front 186 lbs 

4411 10’ x 7’ Portable Stall Partition 180 lbs 

4421 7’ Portable Stall Post 10 lbs 

Tie Stalls 

Hi-Hog horse stalls can be found at many of North 

America’s premier equine venues including Spruce 

Meadows, Thunderbird Equestrian Centre and The 

Calgary Stampede. For those who demand excellence, 

Hi-Hog offers a high quality portable horse stall. 

Designed for quick, hassle free installation, they are 

ideal for those who rent out stalls. The panels are light 

enough to handle and strong enough to endure multiple 

installations. A forklift and 4 men can install 300 

stalls in a day. 

Our partition panels come with three-way connectors on 

one end. This design means that a bank of back-to-back 

stalls will only need one stall post. This makes installation 

a breeze. And since our three-way connectors pivot 

in line with the partition for shipping you can stack them 

flat and ship them efficiently without worrying about 

damaging the connectors. 

With the modular design you can have one stall or a 

hundred stalls. Stalls can be purchased with or without 

roofs. Roof tarps are designed for stall configurations 

20’ wide by 30’ long minimum. For roof pricing or help 

with your design call toll free: 

1-800-661-7002. 

“Spruce Meadows opened in 1975 and Hi-Hog was 

there. Over the years Hi-Hog has supplied Spruce 

Meadows with both box stalls, temporary stalls, and 

round pens. They have also supplied us with a number 

of products not directly linked to the equine industry 

such as bleacher stands. In addition Hi-Hog has been 

able to help us with a number of special projects such as 

the transport stall they built for us which we use to safely 

unload horses from aircraft. We continue to work with 

Hi-Hog because their products and service have always 

been top notch.” 

Randy Fedorak, V.P. & Director, Special Features, 

Spruce Meadows, Calgary, Alberta 

Tie-stall panels are 10’ long. Their height varies from 7’ 

tall at the front to 52” at the rear. The front of the panel 

attaches to the wall with two wall brackets (item 4060). 

The rear of the Tie stall panel comes standard with an 

adjustable vertical mounting bracket for attaching to the 

floor and ceiling. This bracket can be adjusted for ceiling 

heights from 8’ to 12’ in height. The raised portion of the 

panel comes with 16 gauge sheet metal. The bottom of 

the panel frame comes with channel ready to accept 16 

pieces of 2” x 8” lumber x 47.5” long lumber (wood and 

wood fasteners are not included). 

The mangers come with brackets for mounting to the 

front to a wall and sleeved brackets on the side sleeve to 

attach to a variety of tie stall widths. The manger comes 

with a ring for tieing off your horses. 8 cubic foot capacity. 

Tie Stall 10’ Partition Tie Stall 5’ Manger 

Item # Weight Item # Weight 

6115 163 lbs 6113 90 lbs

Box Stalls 

For more information on our line of horse products including Box Stalls, Portable Stalls, Stall Accessories, Round Pens, and 

Roping Equipment call 1-800-661-7002. Please note the descriptive name is followed by the actual dimension. The actual dimension 

is taken from the outside edges of the end verticals. Connectors project 1” from verticals. 

Box Stall Fronts 

Length Actual Length Height Item # Weight SRP 

10’ 116 1/8” 7’ 1630 225 lbs $450.00 

12’ 140 1/8” 7’ 1640 255 lbs $503.00 

Our premier line of Stall Fronts 

come standard with the door 

on the right side. The 4’ wide 

rolling door comes complete 

with a horse window. The door 

travels smoothly on 4” silent 

nylon rollers. A corner feed 

gate permits feed to be placed 

in the stall without entering the 

stall. 

Stall fronts and partitions are 

sold as frames only and do not 

include wood. 10’ Stall Front with 10’ Open Top Partition 10’ Stall Front 

Box Stall Partitions 

Open Top Partition All Plank Partition 

Length Actual Length Height Item # Weight Length Actual Length Height Item # Weight 

10’ 118 7/8” 7’ 4210 160 lbs 10’ 118 7/8” 7’ 4110 90 lbs 

12’ 142 7/8” 7’ 4212 190 lbs 12’ 142 7/8” 7’ 4112 110 lbs 

Partition Channel Set Partition Strap Set 

Height Item # Weight Height Item # Weight 

7’ 4099 25 lbs 80” 4098 13 lbs 

Accessories 

Wall Bracket Animat Corner Feeder Hay Manger Blanket Hanger 

Item # 4060 Item # 4050 Item # 4040 Item # 4030 Item # 4020 

Weight 1lb/each Weight 90 lbs Weight 10 lbs Weight 20 lbs Weight 8 lbs 

Require two per partition connection 

to wall. 

Dimensions 3/4” x 48” x 72” Plastic corner feeder comes 

with steel support mounting 

ring. 

Designed for wall mount. 

18” deep, 28” wide, 28” high. 

Designed for wall mount. 

Includes mounting brackets. 

27

28 


Roping Chute 

The Hi-Hog Roping Chute is built to PRCA and CPRA specifications. This durable 

chute, designed to handle both calves and steers, is manufactured using minimum 

60,000 psi, high tensile steel tubing. The contoured sheeting used on the bottom 

36" keep your stock facing forward with their legs and feet safely within the chute. 

The spring loaded release gate can be quickly and easily tripped from the operator's 

seat mounted on top, from either side of the chute, or from horseback. The 

release gate springs open and locks securely to prevent the gate from swinging 

back and adversely spooking the animal. The bottom half of the release gate is 

sheeted to keep feet contained while the top half comes with horizontal rails to 

keep your stock facing down the arena. 

This chute comes equipped with quick access barrier gates on both sides. These 

gates provide excellent access for attaching neck ropes or horn wraps. The simple 

but solid gravity lock insures that you can work efficiently and still be confident 

that your animals are securely contained. 

Stock flow can be easily controlled with the lift-up tailgate. Like the release gate, 

the tailgate can also be operated from the operator's seat mounted on top, or from 

either side of the chute, or from horseback. 

A simple lead-up alley can be made by adding two 8' long x 5' high Corral Panels 

(item #760) and a 24" Alley Spreader with a Gate (item #3360). 

Roping Chute ...Item #1200 

Call 1-800-661-7002 for free assistance with your new arena design. 

Specifications 

Length - Outside - Open 103.5” 

Length - Outside - Closed 96” 

Length - Inside - Closed 90” 

Width - Outside 32” 

Width - Inside - Lower 18.5” 

Width - Inside -Upper 28” 

Height - Outside 72” 

Height -Inside 60” 

Height of Hotroll Sheeting 36” 


Quick access barrier gate


Bucking Chutes 

Framework: primary frame: 3.5"OD, .225 wall. Secondary frame 2-3/8" OD, .190 wall. 

Bucking chutes are mounted on 4.5"OD, .375 wall skids. 

Rolling doors can be operated from either the front or the back of the chute. 

Rolling doors glide smoothly and silently on nylon wheels. 

Rolling door track is covered to protect both rough stock and rider. 

Rolling doors automatically lock shut. 

Rolling doors come with rubber padding to protect both rough stock and rider 

Heavy Duty Deluxe Gate Latch operates safely and effortlessly. 

Gates swing 180º to lie flat against chute, protecting both rough stock and rider. 

27" expanded metal catwalk folds flat against chute for efficient transportation. 

Universal Hi-Hog connectors free you to connect any Hi-Hog panel to this chute. 

Made to PRCA and CPRA specifications. 

All Hi-Hog equipment is powder coated Hi-Hog green for a long lasting finish. 

Left or Right hand exits are available. 

Item # 1190 Set of Three Bucking Chutes (specify Left or Right Exit) 

Outside Height: 96” Panel Height: 76.5” 

Outside Width: 86” measured at door track Gate Height: 76.5” 

Inside Section Length: 101” Rolling Door Height: 85” 

Inside Width: 32” Weight: 5060 lbs. 

At over 5000 lbs, Hi-Hog's 

outstanding three section 

bucking chutes may be 

the strongest bucking 

chutes available. Take a 

look at the structural 

framework and you'll 

instantly see that these 

chutes are built to last. 

The heavy duty one piece 

construction provides 

both structural integrity 

and unmatched durability. 

In addition to the obvious 

strength of this chute you 

will also find superior 

features and performance. 

29

30 


Bison Manual Squeeze Chutes 

Manual side-swing Bison Squeeze Manual swing-up Bison Squeeze 

Unlike most bison squeezes where the manufacturers simply tack an open-frame cage onto the front of their cattle 

squeeze and call them a bison squeeze, the Hi-Hog Parallel Axis Bison Squeeze has been designed from the ground 

up solely for bison. Compare the Hi-Hog chute with others on the market and you will find the completely reversible 

Hi-Hog bison squeeze longer, taller, heavier, stronger and safer. 

Compared with cattle, bison exhibit much stronger ‘fight or flight’ behaviors. Bison, for example, have a much larger 

flight zone, they accelerate far faster, and they are more susceptible to stress, particularly when they're isolated. 

Our bison equipment is designed with a thorough understanding of these differences. Our squeeze chute is fully 

sheeted to create a dark calming environment. The sheet metal has been caulked with silicone to reduce noise levels. 

The inside of the squeeze is smooth and the gaps have been minimized to protects horns and feet. 

In 1995, Hi-Hog redesigned and redefined the bison crash cage by sheeting in all but two narrow horizontal windows. 

In previous years our crash gate was made with open bars, similar to most of the crash cages you see in the market 

today. We found that the bison would ignore the bars and try to jump and ‘crash through' this type of gate, causing both 

injury and stress. With Hi-Hog's closed-in crash gate bison walk calmly forward to look through the windows making it 

far easier for the rancher to catch the bison the first time while minimizing animal stress and virtually eliminating 

injuries. 

You can choose from two manual bison squeeze chutes, the traditional side-swing crash gate (Item 2365) and the popular 

swing-up crash gate (Item 2360). The hinge point on the side-swing can be easily shifted from one side to the 

other. The swing-up crash gate model comes with brackets already installed to facilitate an easy and affordable 

upgrade to hydraulics. For larger operations who want the convenience of hydraulics we also have a hydraulic model 

(Item #2367) 

The parallel squeeze action draws the tapered sides inward and forward keeping your bison centered and balanced. 

Operation Completely reversible operation 

Weight Side Swing: 3,200 lbs, Lift-up: 3,400 lbs, Hydraulic:3,700 lbs 

Inside Length 100” 

Inside Height 82” 

Inside Width Adjustable from 12” to 32” 

Base Width 40” 

Side Access 8 Sheeted and siliconed, quick latch, drop down panels 

Neck Access 2 vertical, sheeted and siliconed, quick latch, neck access doors 

Tail Access 2 vertical, sheeted and siliconed, quick latch, tail access doors. 

Foot Access 2 horizontal, sheeted and siliconed, drop down kick panels. Panels come with plunger latches. 

Side Exits Comes complete with two fully opening side exits. Excellent for sorting or for emergency access. 

Tail Gate Comes with a sheeted and siliconed, quick and quiet rear rolling door. 

Head Gate Full Length bottleneck scissor headgate. Both sides can be adjusted both at the top and at the bottom. 

Crash Gate Sheeted and siliconed. The sloped bottom and top insure bison keep their feet behind the stanchion. 

Grease Zerts All pivot points come with 2 two hinges. All hinges are equipped with grease zerts. 

Solid Construction 100% steel construction including floor and access panels.

Hydraulic Swing-Up Bison Squeeze 

Control Alley: the sheeted 32” wide control 

alley is usually used directly behind the 

squeeze chute. This alley comes with a 

rolling door at both ends, a sheeted roof 

panel, and a side exit. 

7’ high, 7 rail 

Bison Panel 

7’-2” high, sheeted 

Bison Panel 


Bison Hydraulic Squeeze Chute 

The hydraulic bison squeeze is based on our highly successful, field 

proven manual bison squeeze chutes. Like all Hi-Hog products this 

squeeze has been designed to be simple, flexible and functional. 

Reversible Operation Operation can be easily changed from one side to the other. 

Weight of squeeze chute 3700 lbs 

Weight of Power Pack 140 lbs 

Hydraulic Lines 110/220 Volt, 20 litre (5.28 Gallons) 

Hydraulic Head Gate Each circuit includes independent adjustable pressure settings. 

Hydraulic squeeze sides Includes line blocks for safe, soft-catch and solid, positive lock. 

Hydraulic Crash Cage Securely locks in both the raised and lowered positions. 

Hydraulic Tail Gate Rides smoothly on Silent Nylon Wheels. 

Hinged Operators Boom 

Bison Panels & Gates 


Bison Gate in Frame 

Provides the operator with the freedom to work the bison’s flight zones 

and to position handler for the best viewing angles. 

7’ high, sheeted 

Bison Gate in Frame 


Bison Gate 

Medium pressure Heavy pressure Medium pressure Heavy pressure Medium to heavy pressure 

Available Lengths: 

4’,6’,8’,10’,12’,14’,16’ 

Constructed using 1.9” 

O.D., 14 Gauge high 

tensile steel tubing. 


4’,6’,8’,10’,12’,14’,16’ 


O.D high tensile steel 

tubing. 

Bison Working Alleys 

Box Alley: The sheeted 5’ wide box alley, and 5’ to 3’ wedge are ideal 

for working bison. Bison do not like to be isolated. The box alley allows 

you to bring multiple bison into the alley. They have room to turn and 

they are with their herd mates so they will remain relatively calm. When 

you are ready to bring one of the bison ahead into the squeeze simply 

slide the rolling gate across the wedge section to isolate one animal 

and then quickly open the tail gate to the squeeze. 


8’,10’,12’ 


O.D. frame and 1.9” 

O.D. 14 ga tubing. 


8’,10’,12’ 


O.D. frame and 1.9” 

O.D. 14 ga tubing 


4’,6’,8’,10’,12’,14,16 


O.D., 14 Gauge high tensile 

steel tubing. 

31

32 

Cattle Guard - 7’ Road Length 

Item # Road Width # of Sills Weight (lbs) 

3712 12’ Single 1,659 

3714 14’ Single 1,857 

3716 16’ Single 2,146 

3720 20’ Single 2,632 

3725 7’ Smooth Ride Bars 215 

Cattle Guard - 8’ Road Length 

Item # Road Width # of Sills Weight (lbs) 

3616 16’ None 1,863 

3620 20’ None 2,273 

3812 12’ Single 1,797 

3814 14’ Single 2,007 

3816 16’ Single 2,322 

3820 20’ Single 2,847 

Oilfield Equipment 

Cattle Guards 

Hi-Hog offers a variety of Cattle Guard sizes and options. Our 

Cattle Guards come in 7’ and 8’ road lengths and 12’, 14’, 16’, 

and 20’ road widths. They are engineered to 17000 kg/axleload, 

or 4250 kg/pair of wheels. The Cattle Guards 

come complete with break-a-way 2 7/8” diameter posts. 

These 4’ high posts come pre-drilled to accept our swing 

gates or our handy gates. We also offer optional 5’ high posts 

which come pre-drilled to accept our corral or heavy duty 

gates. Both set of posts also come with chain links for affixing 

fence line wires. 

3912 12’ Double 2,135 

Swing Gates 

3914 14’ Double 2,403 Our swing gates are designed to mount on the pre-drilled 

3916 16’ Double 2,773 break-a-way posts which come with all our Cattle Guards. 

3920 20’ Double 3,411 

The single swing gate comes with a chain latch for locking. 

The double swing gates come with a solid bracket which ties 

3825 8’ Smooth Ride Bars 255 the two gates together for locking. 

Cattle Guard - Swing Gates Smooth Ride Bars 

Item # Road Width Gates Weight (lbs) 

Smooth ride bars provide a smooth drive surface for one 

vehicle to cross the gate. They are available for both the 7’ 

3512 12’ Single 79 and 8’ road length cattle guards. A set of smooth ride bars 

3514 

3516 

14’ 

16’ 

Double 

Double 

89 

124 

provide two 22” wide tracks mounted 48” apart. The tracks 

are made from five pieces of 1/2” x 2” steel spaced 3” apart. 

Please specify if you want one or two sets of smooth ride bars 

3520 20’ Double 144 when you order your gates. 

Wellhead Fencing 

Protect your investment with Hi-Hog’s heavy duty cattle guard fencing. 

The fence of choice for oilfield, pipeline and utility companies. Call 1-800-661-7002 for details. 

Accidental livestock death and injury can cost thousands of dollars. By protecting your wellhead with 

Hi-Hog’s cattle guard fencing you can protect your equipment and lower your risk of liability.

Park Equipment 

Bleacher Stands 

Are you looking for seating for your Hi-Hog riding or rodeo arena? Hi-Hog offers both a 5 and 10 row bleacher frame. 

These bleacher frames are engineered to meet or exceed Canadian standards. Each bleacher section measures 16 

linear feet. Bleacher sections can be joined to provide continuous seating. Price includes steel frame and steel 

frame fasteners. Wood and wood fasteners are not included with this package. Custom design is also available. 

Cross bracing design provides 

superior strength. 

Mounting brackets come with pre-drilled 

5/16” holes to accept lag bolts or screws. 

Fire Box 

Designed and manufactured for the campground industry this 

firebox is also available to the public. The grill swings safely out 

of the way providing full access to the firebox. Air-holes are cut 

around the base of the perimeter to allow good airflow. 

Box dimensions are 21” x 21” x 12” 

Grill is 19” x 11” 

Item #9012 

Picnic Table Frame 

Item # Description 

6052 16’, 5-Row Bleacher Skid Frame 

6052.1 Skid Frame Connector (Set of 5 Pieces) 

6053 16’ Bleacher Back Rail 

6054 5-Row Bleacher, 2 Side Rails 

6055 16’, 5-Row Bleacher 

6056 16’, 10-Row Bleacher 

6057 10-Row Bleacher, 2 Side Rails 

Hi-Hog has long been recognized for their 

outstanding livestock equipment which is 

built to endure the abuse of its users: horses, 

cattle, and bison. It is no surprise that 

Hi-Hog's picnic table is also built to last. 

That's what makes these tables ideal for parks, 

playgrounds, schools, or even the active back 

yard. Hi-Hog's handicap accessible, walk through 

picnic table frame is made from 1.5" OD 14 

gauge, minimum 60,000 psi high tensile steel 

tubing. To customize the look and feel of your 

table simply install the lumber of your choice to 

the easily assembled frame. You'll find the dark 

green powder coat paint finish will look great with 

any wood or stain you choose for years to come. 

Item #8446 Weight 46 lbs 

Bike Rack 

This bike rack can facilitate up to 36 bikes. The structure also 

can be used as a sign stand or barrier. This is a non stock item. 

Please call in advance of required date. 

Bike Rack dimensions: w” x L” xH” 

Grill is 19” x 11” 

Item #xxxx 

33

34 

Kennels 

A quality dog enclosure for the discerning pet or kennel owner. 

Solid Construction: We use superior grade 2" x 4", 10 ga. steel 

mesh. Each wire is individually welded to our solid square tubing 

frame to create a safe and secure panel. 

Safe: Unlike chainlink kennels, there are no exposed wires, no 

bulky connectors, no exposed nuts or bolts and no sharp edges for 

your dog to catch their collar or cut themselves on. 

Square corners: In addition, our panel corners are not rounded 

like some kennels. Rounded panel corners create a serious leg lock 

where a leg can slide off the top rail and become trapped in the 

wedge where the two panels meet. Our corners are square and 

come with a connector which prevents legs from sliding into the 

gap. 

Secure: Our simple sliding gravity door lock accepts most padlock styles to ensure that your animal is 

safe and secure. 

Optional Roof: the optional roof panels will prevent your dog from escaping and ensure others won't 

get in. 

Quick setup: You don't need a wrench to set up this kennel. Hi-Hog's unique connectors insert quickly 

and easily into the square tubing verticals to create a rigid panel-to-panel joint. 

Quality 

Security 

Flexibility 

“Several years ago we set up some Hi-Hog 

kennels at our vet clinic. We're very 

happy with our decision. The kennels 

have proven to be exceptionally sturdy 

and we love their portability. We're 

also very impressed with the versatility 

of the modular components. So much 

so that we just bought some more Hi-Hog 

components to add on to our existing 

bank of 5' x 10' kennels.” 

Dr. Dale Gibson 

Moore & Company Vet Clinic 

Balzac, Alberta 

Versatile: Our modular component system makes it easy to design a 

kennel that meets your needs. Whether building a single kennel, a bank 

of kennels, or back-to-back banks of kennels, you'll find the perfect 

solution with Hi-Hog's modular 5' and 10' components. 

Call 1(800)661-7002 and our design staff will create an accurate 

and itemized kennel design that meets your needs. 

Portable: With Hi-Hog's simple connector system you can quickly 

and easily expand, re-locate or rearrange your kennels. 

Easy Cleaning: The bottom rail of the Hi-Hog kennel is raised 1" 

above the ground to ensure there is no place for waste to gather 

when cleaning the kennel with a hose. 

Durable and attractive finish: Hi-Hog's durable forest green powder 

coat paint finish ensures you will have an attractive and lasting addition 

to any yard. 

Not just for the dogs... 

Animal Enclosures Secure Storage Display Stands

20' 

15' 

10' 

5' 

Modular Kennel components 

6090 6091 6092 6093 

6094 

6096 6097 

6098 6088 6089 

6095 

Sample Plans: kennels can be set up back-to-back and all the plans shown can include a roof. 

5' 10' 15' 

20' 

Item # Description Weight 

6088 2-Way Connector 1.6 lbs 

6089 3-Way Connector 3 lbs 

Non Stock 4-Way Connector 4.5 lbs 

6090 10’W x 6’H Panel 62 lbs 

6091 5’W x 6’H Panel 40 lbs 

6092 10’W x 6’H Panel with Gate 86 lbs 

6093 5’W x 6’H Panel with Gate 64 lbs 

6094 5’W x 10’L Roof Panel 48 lbs 

6095 10’L Roof Panel Support 14 lbs 

6096 10’W x 6’H Spreader 30 lbs 

6097 5’W x 6’H Spreader 24 lbs 

6098 Wall Connector 2 lbs 

5’ x 10’ Kennel with Roof Panel 

5’ x 10’ Kennel 

35

HERE’S WHAT SOME OF OUR CUSTOMERS HAVE TO SAY ABOUT HI-HOG 

We do on-the-farm research which requires an efficient, low stress handling system. After looking at a lot of other systems we 

chose to go with Hi-Hog. Hi-Hog has thought of details that we wouldn't have. Our handling system is a safe, easy to operate, 

one man operation. Fred Taylor, Owner, Allan Munroe. Farm Manager 

Taylor Made Research, Livestock Division, Pierson, Mb 

Anyone who has ever helped me work cattle has been impressed with my Hi-Hog squeeze chute. I can handle my biggest bulls 

with ease and also head gate my baby calves for ear tagging. You've got plenty of access for any procedure. I've had my Hi-Hog 

Squeeze for several years and the only time I've ever been tempted by another squeeze was when I saw the latest Hi-Hog 

squeeze. Leon Steffen 

Burdette, Ks 

I'm sixty years old and I wouldn't be without my Hi-Hog Parallel Axis Squeeze. Safety is paramount and the Hi-Hog is the only 

squeeze I feel comfortable using. The adjustments on most squeeze chutes are so cumbersome you never use them, however, 

the Hi-Hog squeeze adjusts easily, even with my arthritic hands. It is exceptionally user friendly for both me and my animals - I 

don't have to fight to get my big (wide) pregnant cows into the extra high, extra wide chute for their pre-calving vaccinations. I'm 

not sure who loves this chute more - me, my cattle, or my Vet! In my opinion, you simply cannot get better value for the money. 

Elizabeth May, May Meadows Farms 

Hawkestone, On 

We run a commercial cow/calf operation. Most of the time it's just my wife and I working the cattle. With the Hi-Hog tub, alley and 

squeeze we are no longer getting all beat up. It's easier and safer as we do everything from the outside of the alley. We really like 

the ease of adjustment on the S-Alley as we work with all different sizes of cattle. The auto headgate on the P.A. Squeeze is excellent, 

I wouldn't have anything else. Several very knowledgeable cattle people have seen our Hi-Hog system work and have commented 

‘That's the best system we’ve ever seen & we've seen them all'. If someone is looking for a working system or a squeeze 

Hi-Hog is the one. Bob & Barb Marx, SZ Bar Farms 

Bozeman, Mt 

We raise seedstock for a bucking bull string registered with the Rodeo Stock Registry of North America. For us the most important 

consideration is the safety of our animals and our handlers. Hi-Hog’s equipment is user friendly, sturdy, stout, and safe. When 

our Hi-Hog system was delivered we started knocking down our old lead up alley at noon and by 2:00pm we had the Hi-Hog system 

set-up and had sorted and tagged 25 head of Brahman-Cross calves, cows and bulls ranging from 200 lbs to 1800lbs, and 

loaded out 5 head. Brad O'Leary, Maple Key Cattle Co. 

Woodstock, On / Weatherford, Tx 

Several years ago I bought a Hi-Hog squeeze chute. Since then I've purchased the Hi-Hog palpation cage, S-alley, a funnel crowding 

tub and a number of panels and gates. I'm extremely happy with everything; and so is my technician, my vet, and anyone else 

who has seen it. I work my cattle on my own and I can't afford to get hurt. That's why I bought a Hi-Hog system. After looking at 

a lot of other systems I could see there was no comparison for safety, accessibility, or strength. Whether I'm performing breeding/AI 

work or dehorning and castrating, this system adjusts smoothly and quietly to do the job at hand. I am really pleased and 

impressed with this equipme Marg Kerr, Kervan Farms 

Milford, On 

I bought a Hi-Hog tub and alley system and everything about it is good. My son is a vet & he says it's the one to have. The funnel 

tub & double gate alone makes it superior to others. You only need one guy to run the whole thing. I would recommend Hi- 

Hog to anyone considering a working system or a squeeze chute. Willard Hjartarson 

Cut Bank, MT 

It used to take a day and a half to work our 1200 head cow/calf operation. Since we put in our Hi-Hog tub and ‘S'-Alley it takes 

less than 5 hours and it is a lot less stressful for the animals and the men. 

Ron Terry: Ranch Hand, 3L Cattle Company (1200 head cow/calf) 

Naicam, Sk 

We have a 200 head commercial Simmental and Angus beef 

herd. When it came time to replace our handling facility we 

went with Hi-Hog. We find that with this equipment we can 

work efficiently and safely and cattle handle much easier. 

William and Rena Swiderski 

Bonnyville, Ab 

We needed the most sturdy heavy-duty panels that 

money could buy. After looking at all the competitive 

products, we chose Hi-Hog - simply because they are the 

best. We couldn't be happier with the quality. 

Roberta Olsen, O Lazy S Quarter Horses & Paints 

Hagerman, ID 

Your Local Dealer

Hi-Hog Brochure-01103.qxd - Rio Hondo Livestock Supply

Create successful ePaper yourself

Delete template?

Save as template?