stove box stockists brochure - The Stove Box

C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E

T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E

A NEW CONCEPT IN STOVE FITTING
Create the perfect fireplace for your stove
The Stove Box has been designed to keep site work to a minimum, cutting this down from a 2 day job into less than a full day. To be used
with wood, multi-fuel and gas stoves. The Stove Box is delivered as a flat pack, which comprises of 2 sides, a rear panel and a top with a
choice of various collars to fit 5”- 6” stove pipes. Various extras include frames which can be used when a fire surround is not required,
stove fascia plates which can be fitted with most fire surrounds with a 1"- 3" rebate and a choice of 6 interiors. The Stove Box is fitted in a
chimney breast and face fixes which sits on top of the hearth. It can be used in existing chimneys and also in new build and can be
connected with all flue systems now being used.
Complete your fireplace with our range of traditional or contemporary finishing touches
NOTE: The Stove Box must be lined with a fire proof material. All appliances must be fitted by an approved installer.
T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E 3

4
NEW STOVE BOX PRODUCTS

THE STOVE BOX
SB1/B, SB2/B and SB3/B
These have been very popular and are the same size as above except they
are approx 30mm wider to allow for the extra thickness of the brick interiors.
SB4
This box was designed to fit with a fire surround in stone from the gallery
range and has proved to be popular with a larger width and still 16" deep.
This box is also the used as the new Gas Stove Box.
Blazers
A new box was designed for when a larger opening is required. No need for
a fascia plate or slips. Can be used on its own with a beam or mantle above.
Also has the new hoover holes for easy cleaning and also can be used for
display with lights.
Please ask your stockist for details on this product.
36 x 34 x 18
914 x 863 x 460
SB1 SB2 SB3
34 1 / 2 x 36 x 16
867 x 914 x 405
38 1 / 2 x 38 x 18
978 x 965 x 457
30 x 32 x 16
764 x 815 x 405
New hoover holes
Display lights
30 x 32 x 14
764 x 815 x 355
T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E 5

6
FOUR FITTING OPTIONS WHEN INSTALLING
A MULTI/WOOD BURNING STOVE
1
The stovebox with all the advantages, with
extra's to make a complete fireplace and
that can be installed in one day.
3
Chamber kits, complete with brick sides
and back, frame and a register plate
when a stovebox will not fit or a cheaper
version is required.
Our selection of register plates
adjustable collars make sitework
servicing the stove easier.
Our collars are used for various work. For a
simple fit up to a clay liner or when a
builder has concreted a chamber and left a
hole for the stove pipe, just bolts up and
around the stove pipe to seal. Also ideal for
a fitter that prefers to cut his own plate on
site and needs the adjustment.
T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E
2
4

THERE ARE 2 MAIN WAYS OF
FITTING A STOVE BOX
This shows an exploded view. An
example of how simple and effective
the Stove Box can be. By using a fire
surround in wood, marble or stone with
a fascia plate shows how you can make
a unique fireplace.
This is a very popular way of a fitting
Stove Box into the chimney breast.
Place a chosen frame which covers the
front edge of the interior for a simple
hole in the wall feature.
T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E 7

8
LYNDON BRICK FIREPLACE KIT
A new feature to our product range. A rustic look with a choice of colours.
Comes complete with a solid 4" beam stained (see samples). In our opinion this
stunning fireplace will give a cottage feel to any room. Shown here in a brown
brick, natural waxed oak top in a SB1 Stove Box with the brick interior to
match. All sitting on a stone effect hearth. A 60" chimney breast will be
required for this fireplace to fit. The stove displayed here is a Devon single
door by Yeoman from Stovax range.
Please ask your stockist for details on this product.
Dark Brown Red Golden Brown Cream
Oak Beam Stains
Natural
Golden Oak
Repro
T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E

CHAMBERS
Brick sides and a back can be used with our Stove Box as an interior or
on their own as a chamber. Available in 4 colours Dark Brown, Red,
Golden Brown and Cream. Suitable for the new Lyndon Fireplace
(Large only) and the brick arch.
Large to fit SB1
Please ask your stockist for details on this product.
Dark Brown Red Golden Brown Cream
T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E 9

10
NEW BRICK ARCH
A slabbed arched fascia has been designed for easy fitting
up to our Chamber Set or a Stove Box. Also available in
4 colours Red, golden brown, cream and dark brown.
This shows an exploded view of the arch fascia with
Stove Box(SB1) and matching interior.
Displayed with a SB1 Stove Box, Arched Brick Fascia, with fire surround.
A stunning feature giving character in any room.
Please ask your stockist for details on this product.
T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E

ARCHED FRAME
We have introduced this new frame to add to our existing frame
options for a more interesting, but simple design. This frame fits our
SB1 Stove Box and is shown here in an anthracite finish with shutters
in golden oak sitting on a new hand made tiled hearth. Also displayed
is the new canopy, which can be attached to the top of the Stove Box
and transforms the Stove Box to an open fire/gas situation and also
can be attached to flue systems by using an adaptor. The interior is a
brick tile. Also available in a plain frame without shutters.
Please ask your stockist for details on this product.
T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E 11

12
THE NEW GAS STOVE BOX
Introducing the new Gas Stove Box. A complete fireplace, just fits in the
wall and comes complete with a built in granite hearth, SB4 stovebox, and
frame. Shown here with a CL5 gas stove from yeoman, with a flush finish.
Can be set up off the ground and comes with halogen lighting. Which gives
a spectacular contemporary feature.
Colour options:
Brown
Mojave Red (as illustrated)
Anthracite
Sand
Please note this fireplace must not be fitted with lighting,
unless the chimney is lined.
Please ask your stockist for details on this product.
T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E

CHELSEA FRAME
The Chelsea Frame gives a new look to the SB2/3 Stove Box. A simple
feature to enhance any room where a larger fireplace is not required.
Shown here with a SB2 Stove Box with mosaic interior, on a textured
granite hearth, a green Firefox 5 multi fuel stove and pipe. Frame in
Metallic brown finish.
Colour options:
Brown
Mojave Red
Anthracite
Sand
Create your own look by selecting various interiors.
Please ask your stockist for details on this product
T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E 13

14
BRICK INSET
This has been designed to fit most surrounds on the market, and when the
customer requires a stove fitted without too much disruption (as a
standard cut out 22" x 16" ). Also can be fitted with a gas, electric or an
open grate. Choice of colours Brown Red Buff. Requires a 2.5" rebate.
Displayed here with a Kexby fire surround, stained golden oak on a slate
effect tiled hearth and an inset stove from the Stovax range.
Please ask your stockist for details on this product
T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E

16
CANOPY
We have designed a canopy which can be bolted on to our large register plate or Stove
Box. It has the advantaged of adjustment to line up with existing flues. Choice of 2
adaptors 6" for gas and 8" for sold fuel systems. Transforms the Stove Box with all its
advantages to a dog grate situation. Colour Anthracite. Two options plain or studded.
Shown here complete with our Rustic Corble fire surround in natural oak.
Please ask your stockist for details on this product
T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E

OTHER STOVE BOX PRODUCTS
17

18
FASCIA PLATES
These items have been designed to be
placed in front of the Stove Box and up
to the rebate of most surrounds. The
interiors used are cut up to the back of
the stove fascia plate, depending on
the size of the rebate.
FRAMES
There are a choice of 3 frames and they
have been designed for when a simple
hole in the wall feature is required.
The frame covers the front edge of the
interior. Available in 2 sizes to fit SB1
and SB2/3.
Hand forged
studded black/hand
forged. Plain
available
Sphinx fascia plate
in matt black
T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E
Diamond fascia
plate in matt black
Patterned Half Round Plain
Sphere fascia plate
in matt black

LINED INTERIORS
• Plain fireboard for painting or tiling
• Textured fireboard to paint
• Reeded fireboard
• Featured brick, various patterns, stone
and much more...
Feature brick made from original
handmade bricks and all these products
are only sold with The Stove Box.
Brick feature Textured
board
Plain board
T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E 19
Reeded
board
Mosaic Bamboo Slate
An example of the preparation work
for the lined interiors

20
A SMALL SELECTION OF COMPLETED FIREPLACES
USING ‘THE STOVE BOX’
Reeded interior with metallic
brown frame to match stove
Herring Bone brick interior with half
round frame in black
Limestone frame, textured interior
painted red with 5kW Stove
Kexby fire surround in golden oak with hand
forged studded fascia plate. Textured interior in
SB2 Stove Box 8kW multifuel stove
Brick Bond in SB1 Stove Box with sphere
fascia plate to fit with most standard
fire surrounds
The Blazer Stove Box with textured
interior with L shaped beam in oak above
with Stovax multifuel stove on old
titled hearth
T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E

OTHER FIREPLACE PRODUCTS
21

22
FIREPLACE SURROUNDS
Oak has a choice of finishes:
• Natural hand waxed
• Golden Oak waxed
• Repro oak
All oak products are made from english
kiln, dried character oak with a distressed
waxed finish and will have cracks, knots
and will get even better with age. This
provides you with a totally distressed
hand made finish. This is providing you
wax with a good quality wax.
Please ask to view our samples.
Rustic Corble Plain Rustic Kexby Rosedale
L-Shaped Beam
Mantle Mirror
MIRRORS
Newark
Rustic Mirror
MANTLES
Corble
T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E
FENDERS
Rustic Fenders
Solid Beam

FIREPLACE HEARTHS
Riven slate hearth. One piece for stoves Black and red tiled hearth with tongue Standard granite.
Also available in textured granite
STOVES STANDS
REGISTER
PLATES
Collars can be purchased
on their own and include
fibre rope, bolts and
washers.
D E S I G N E D , M A N U F A C T U R E D & F I T T E D F O R Y O U R H O M E
Two size register plates with adjustable
collars for 5”/6” flue pipes
32” x 16” 2mm thick.
Primed
36” x 18” 2mm thick.
Primed
23

24
CONTEMPORARY LOG STORES
Wall mounted
M
WOODEN LOG STORES
Available in 3 sizes:
W 4’ x H 4’ x D 2’
W 4’ x H 5’ x D 2’
W 4’ x H 6’ x D 2’
Tick
Shield
Small cube Medium cube Large cube
T H E S T O V E B O X - C R E A T E T H E P E R F E C T F I R E P L A C E F O R Y O U R S T O V E

MADE IN BRITAIN
25

stockists stamp