bc cat04 - Bell and Carlson

101 Allen Road • Dodge City, KS 67801 

620-225-6688 • Fax: 620-225-9095 

email@bellandcarlson.com 

Website: www.bellandcarlson.com

Superior Design 

Because Bell and Carlson stocks have been designed and 

tested by hunters, every shooter can benefit from the 

innovative features built into every stock. All Bell and 

Carlson stocks are designed to reduce recoil and withstand 

temperature extremes, moisture and hard use. The 

stock pitch design increases contact with the shoulder 

for better recoil distribution, while the increased angle of 

comb allows the cheek to fall away from the stock. Both 

of these design features reduce felt recoil, which reduces 

flinch and increases accuracy. Bell and Carlson stocks 

also have an increased pistol grip or wrist arch which gives the 

hand a more natural and comfortable position on the rifle stock. 

Accuracy, Strength, Feel 

The solid throughout Bell and Carlson composite stock withstands 

more abuse than a wood or hollow plastic stock and is unaffected 

by atmospheric conditions. With a Bell and Carlson stock, the 

gun stays on target! Besides being impervious to weather, having 

the benefits of strength, and the reduction of felt recoil, Bell and 

Carlson stocks are built to look and feel like a wood stock with 

which all shooters are familiar. 

Fit and Finish 

Prior to finishing, an action is mounted to all Bell and Carlson 

stocks to ensure a proper fit. Any stock that does not precisely fit 

the barreled action is rejected. 

Easy Installation 

All Bell and Carlson stocks, unless indicated otherwise, 

are drop-in stocks designed to permit the customer to 

simply bolt the barreled action into the stock. Bell and 

Carlson stocks are fit for current model factory standard 

barrel contours. It may be necessary to remove minimal 

amounts of material from the magazine well and/or 

barrel channel. 

Ordering Bell and Carlson 

Stocks and Accessories 

Bell and Carlson encourages the use of its Dealer/Distributor network. 

However, should you be unable to find the Bell and Carlson 

products you are looking, please contact one of our Customer 

Representatives at 620-225-6688. 

Questions? Please contact one of our 

Customer Representatives at 620-225-6688. 

BELL AND CARLSON 

101 Allen Road / Dodge City, KS 67801 

Tel: 620-225-6688 / Fax: 620-225-9095 

Website: www.bellandcarlson.com 


Among the twenty-one outstanding finish options available on all Bell and Carlson rifle and shotgun stocks are these eight Textured 

Finish Options. The paint that is used for the textured finishes is the toughest, most durable stock coating available in the market 

today. The practical, but very attractive textured finish provides a positive, firm grip in less than ideal weather conditions. 

02 - Textured Black 

23 - Gray with Black Spiderweb 

27 - Snow Camo 

30 - Tan with Black Spiderweb 

22 - Black with Gray Spiderweb 

26 - Desert Tan 

31 - Dark Timber 

97 - Olive Green with Black Spiderweb 

When ordering, the 2 digit finish number (ie: 02) becomes the last two digits of the item number (ie: 5131-02). 

PAGE 2 © 2009 BELL AND CARLSON TEL: 620-225-6688

Among the twenty-one finish options available on all Bell and Carlson rifle 

and shotgun stocks are these thirteen outstanding Camouflaged Finish Options. 

Bell and Carlson is the only stock manufacturer to utilize a more durable, licensed hydrographic process. This process also creates 

more defined camouflage patterns with better color intensity and sharpness. Dedicated and experienced hunters who pride themselves 

in their ability to get close to their game can choose from Bell and Carlson’s thirteen popular and effective camouflage patterns. 

03 - Carbelite Camo TM 

09 - Mossy Oak ® Shadowgrass TM 

11 - Mossy Oak ® Breakup ® 

33 - Mossy Oak ® NEW Breakup ® 

20 - Skyline Excel TM 

28 - Advantage Camouflage TM 

35 - Mossy Oak ® Brush TM 

12 - Freedom Tan TM 

13 - Freedom Green TM 

19 - NaturalGear TM 

21 - Snow NaturalGear TM 

29 - Trebark ® Superflauge TM by Lynch 

34 - Realtree Hardwoods ® Green HD TM 

When ordering, the 2 digit finish number (ie: 02) becomes the last two digits of the item number (ie: 5131-02). 

www.bellandcarlson.com © 2009 BELL AND CARLSON PAGE 3


The integral bedding system is computer designed and CNC machined out of 

aircraft grade 6061-T6 aluminum, and eliminates the need for conventional 

bedding, assures perfect fit and alignment of the barreled action and stiffens the 

forend. Medalist stocks are available in all twenty-one finish options. 

The Medalist line of stocks 

combines the stability and durability of Bell and Carlson’s 

proprietary composite stock with an integral aluminum bedding system. 

Other Medalist features include: 

• 13 1/2” length of pull standard, custom length of pull available for an additional charge 

• Hunting and sporting styles weight approximately 2.0 lbs, tactical models approximately 2.5 lbs 

• Choice of twenty-one different finishes • Pachmayr Decelerator recoil pad • Uncle Mikes sling swivel studs installed 


7779-___ Browning A-Bolt, Short Action 

Sporter style with advanced lightweight aluminum block system and Pachmayr 

Decelerator recoil pad. Fits current model short action with standard contour barrel. 

Also fits WSM calibers. 

2131-___ Browning A-Bolt, Long Action 

Fits A-Bolt Sporter style, Stalker, Medallion, etc. (such as .25-06, .270, 

.280, .30-06, 7mm, 300 Win Mag, etc.) DOES NOT FIT BBR. 


2197-___ Interarms MK X, Long/Short Action 

Sporter style, fits current model long or short action with magazine 

area block - .22-250, .243, .25-06, .270, .308, .30-06. 








2194-___ Mauser 96 

Sporter style, fits Swedish Mauser 96 with step barrel, 

without adjustable trigger. 

2193-___ Mauser 98 

Sporter style, fits sporter action with taper barrel without adjustable 

trigger, because of variations in actions modifications may be 

required - .30-06. 







2961-___ Remington 700 BDL, Short Action 

Sporter style, fits models with hinged floorplate, fits 700 Safari Grade, 

Classic and Varmint Special with modifications - .17, .22-250, .222, 

.223, .243, 6mm, 7mm-08, .308. 

2960-___ Remington 700 BDL, Long Action 

Sporter style, fits models with hinged floorplate, 700 Safari Grade, 

Classic, Varmint Special with modifications. 

- .25-06, .270, 7mm, .30-06. 


2963-___ Remington 700 BDL, "Weatherby Style" Long Action 

Weatherby style stock, fits long action models (such as .270, .30-06, 

7mm, 300 Win Mag, etc.) with hinged floorplate. 




29 - Trebark ® Superflauge TM 


Integral Aluminum Bedding System 








The solid throughout Medalist line of composite stocks feature 

Pachmayr Decelerator recoil pads, and are available in all twenty-one of the outstanding 

finish options available on Bell and Carlson stocks, including Snow Camo, pictured above. 


Sporter style, fits models with hinged floorplate and magnum contour 

barrel. (NO CHECKERING). 

2462-___ Remington 700 BDL, Short Action 



2463-___ Remington 700 BDL, Long Action, Left Hand 



2464-___ Remington 700 BDL, Short Action, Left Hand 



2971-___ Winchester Model 70, Short Action 

Sporter style, fits current models with hinged floorplate and short 

action featherweights. Also fits WSM calibers. Barrel channel with 

sight lug requires slight modification. Short action with magazine 

area block must use Long Action stock. 


7776-___ Winchester Model 70, Long Action 

Fits sporter style (POST 64) LONG ACTION with one-piece hinged floorplate. 

(NO CHECKERING). 

7775-___ Winchester Model 70, Short Action 

Fits sporter style (POST 64) SHORT ACTION with one-piece hinged floorplate. 

(NO CHECKERING). 






19 - NaturalGear 







6349-___ Weatherby MKV 

Weatherby style, with #2 contour barrel. 

6556-___ Weatherby MKV, Left Hand 








6498-___ Weatherby MKV Accumark Magnum 

Weatherby style, fits all Magnum calibers from .257 to .460. 

6962-___ Weatherby MKV Accumark Magnum, Left Hand 

Weatherby style, fits all Magnum calibers from .257 to .460. 

6963-___ Weatherby MKV Ultra Light Magnum 

and Standard Weatherby MKV 


2195-___ Weatherby MKV Ultra Light Magnum 

and Standard Weatherby MKV 

Sporter style, with standard contour barrel. 

6501-___ Weatherby Vanguard/Howa 1500 

Weatherby style, fits current model long action. 

6505-___ Weatherby Vanguard/Howa 1500 

Weatherby style, fits current model short action. 








We’ve designed our full line of Medalist 

Varmint/Tactical Style Stocks to help you maximize 

the effectiveness of many modern shooting applications. All are built 

with stable, strong and durable solid structural urethane with aramid, graphite and fiberglass. They also feature a precision 

machined aluminum insert bedding block for total metal to metal fit, virtually eliminating additional bedding 

and assuring a perfect fit that will never change. All our Medalist Varmint/Tactical Style Stocks come equipped with 

a Pachmayr Decelerator recoil pad and Uncle Mike swivel studs and are available in all twenty-one finish options. 


2948-___ Mauser 98 Varmint/Tactical 

Sporter style stock with wide beavertail forend 

With block. Fits #2 barrel but can be opened up to fit larger barrels. 

NO CHECKERING OR CHEEKPIECE. 


2092-___ Remington 700 BDL Varmint/Tactical, Short Action 

Vertical grip style stock, with block. 

2096-___ Remington 700 BDL Varmint/Tactical, Long Action 

Vertical grip style. 


2949-___ Remington Light Varmint, Short Action ADL 

Has tapered, semi-beavertail forend with advanced aluminum lug/pillar 

system and Pachmayr Decelerator recoil pad. Fits current model 

short action with standard contour barrel. 

DOES NOT HAVE FULL LENGTH BEDDING SYSTEM. 















2094-___ Remington 700 BDL Varmint/Tactical, Short Action 

Fits heavy barrel models with hinged floorplate (such as 700P, VS, VLS, Sendero, etc.) 

.17 to .308 calibers. Comes with adjustable cheekpiece for proper cheek/eye placement 

to scope. Also has 3-way adjustable butt assembly that adjusts for length of 

pull, cant (left/right) and height (up/down). The forend is tapered for minute elevation 

adjustments and comes with integral aluminum forearm rail for attachments. 

2098-___ Remington 700 BDL Varmint/Tactical, Long Action 

Fits heavy barrel models with hinged floorplate (such as 700P, VS, 

VLS, Sendero, etc.) in LONG ACTION calibers such as .300 Win Mag, 

.338 Lapua, etc. Comes with adjustable cheekpiece for proper 

cheek/eye placement to scope. Also has 3-way adjustable butt assembly 

that adjusts for length of pull, cant (left/right) and height 

(up/down). The forend is tapered for minute elevation adjustments 

and comes with integral aluminum forearm rail for attachments. 

2956-___ Remington 700 BDL “Light Tactical”, Short Action 

Fits models with hinged floorplate (such as 700P, VS, VLS, Sendero, 

etc.) in SHORT ACTION calibers such as .223, .22-250, .243, .308. 


2958-___ Remington 700 BDL Standard Varmint, Short Action 

Fits models with hinged floorplate, 700 Safari Grade, Classic, Varmint 

Special with modifications - .17, .22-250, .222, .223, .243, 6mm, 

7mm-08, .308. 













2999-___ Savage Short Action Varmint/Tactical 

Fits all short action "two digit models" (such as Model 10, 10GY, 11F, 

etc.) with heavy barrel and blind magazine. Also fits Accu-Trigger. 

2997-___ Savage Short Action Varmint/Tactical 

(NEW STYLE “CENTERFEED” OR “INLINE FEED”) Fits all short action 

"two digit models" (such as Model 10, 10GY, 11F, etc.) with heavy 

barrel and blind magazine. Also fits Accu-Trigger. 


7200-___ Winchester Model 70 Varmint/Tactical, Short Action 

Fits current model with hinged floorplate and heavy barrel. Also fits WSM calibers. 

Has checkering on pistol grip only, "flutes" in forearm and dual front studs. 








2998-___ Weatherby Vanguard/Howa 1500 Varmint/Tactical 

Fits HEAVY BARREL models in SHORT ACTION calibers such as .222, 

.223, .22-250, .243, .308 etc. Has dual front studs. 

2972-___ Winchester Mod 70 Varmint/Tactical, Short Action 

With block. Sporter style, fits current model with hinged floorplate and heavy barrel. 

Checkering on pistol grip only. 







The solid throughout Medalist 

Varmint/Tactical Style Stocks are available in all 

twenty-one of the outstanding finish options available on Bell and 

Carlson stocks, including Black with Gray Spiderweb, pictured above. 


6560-___ Weatherby Vanguard/Howa 1500 Varmint/Tactical, Short Action 

Fits current model short action HEAVY BARREL. Has dual front studs. 



Weatherby style, fits current model short action HEAVY BARREL. Has 

dual front studs. 



Weatherby style, fits current model short action HEAVY BARREL. Has 

dual front studs. 


6554-___ Weatherby MKV Varmint, Long Action 

Weatherby style. 













35 - Mossy Oak ® Brush 

Over the years, Carbelite Classic stocks have been the 

industries finest and most popular line of drop-in synthetic stocks. 

Carbelite Classic features and options include: 

• More models than any other stock design offered by Bell and Carlson • Easy installation 

• Choice of twenty-one different finishes • Designed for scope use • Premium recoil pad installed 

• Uncle Mike sling studs installed • Grip and appearance enhancing checkering on most models 

• Optional reinforced lug recommended for use with magnum calibers • Some right hand and left hand models available 

• Limited lifetime warranty on materials and workmanship 

5131-___ Browning A-Bolt Hunter, Long Action 

Fits Stainless Stalker, Medallion, Gold Medallion and Big Horn Sheep 

- 25-06, .270, .280, .30-06. Does not fit A-Bolt II or BBR. 

5171-___ Enfield P14/17, Long Action 

Fits Military style, Centurian P14 and Remington U.S. 1917, bent 

floor plate for six shot mag - all calibers. 

5081-___ *Howa 1500, Long Action 

One piece trigger guard and magazine - .25-06, .270, .30-06. 

5082-___ *Howa 1500, Short Action 

One piece trigger guard and mag - .22-250, .223, .243, .308. 

5111-___ *Interarms MK X, Long or Short Action 

Fits current model action or short action with magazine area block - 

.22-250, .243, .25-06, .270, .308, .30-06. 

5152-___ *Interarms Mini MK X, Short Action 

Fits current model action - .223, 7.62x39. 

5251-___ Mauser 96, Long Action 

Fits Swedish Mauser 96 with step barrel, without adjustable trigger. 

5051-___ Mauser 98, Long Action 

Fits sporter action with taper barrel without adjustable trigger, 

sporter floorplate, because of multiple origins of manufacture and 

variations in actions modifications may be required - .30-06. 

5081-___ *Mossberg, Long Action 


5082-___ *Mossberg, Short Action 


5012-___ Remington 700 ADL, Short Action, Blind Magazine 

Fits current model and Sportsman 78 action, Model 721 and 722 

actions require custom inletting for proper fit - .17, 7mm-08, .22- 

250, .222, .223, .243, 6mm, .308. 

5011-___ *Remington 700 ADL, Long Action, Blind Magazine 

Fits current model and Sportsman 78 action, Model 721 and 722 

actions require custom inletting for proper fit - .25-06,.270, .280, 

7mm,.30-06, .300. 

*Barrel channel and magazine box area modifications may be 

required for magnum calibers and/or heavy barrels. 

Magnum calibers will require embedded steel lug. (i.e. .300, 

.338, .375, .378, .416, .458, .460, etc.) 












5021-___ *Remington 700 BDL, Long Action 

Fits models with hinged floorplate, fits 700 Safari Grade, Classic and 

Varmint Special with modifications - .25-06, .270, 7mm, .30-06. 

5023-___ *Remington 700 BDL, Long Action, Left Hand 

Fits models with hinged floorplate, fits 700 Safari Grade, 

Classic and Varmint Special with modifications - .25-06, .270, 7mm, 

.30-06. 

5022-___ *Remington 700 BDL, Short Action 

Fits models with hinged floorplate, fits 700 Safari Grade, 

Classic and Varmint Special with modifications - 17, .22-250, .222, 

.223, .243, 6mm, 7mm-08, .308. 

5024-___ *Remington 700 BDL, Short Action Left Hand 

Fits models with hinged floorplate, fits 700 Safari Grade, Classic and 

Varmint Special with modifications - 17, .22-250, .222, .223, .243, 

6mm, 7mm-08, .308. 


Detachable Mag. 



5092-___ Remington Model 7, Short Action 

Fits current model - .223, .243, 6mm, 7mm-08, .308. 

5221-___ Remington 700 Mountain Rifle, Long Action 

Fits standard barrel action - .270, .30-06. 














5031-___ *Ruger M77, Long Action 

Fits tang safety model - .25-06,.257, .270, 7x57, .280, .284, 7mm, 

.30-06, .300. 

5032-___ *Ruger M77, Short Action 

Fits tang safety model - .22-250, .243, 6mm, .308. 

5231-___ *Ruger M77 MKII, Long Action 

Fits current model, stock can be modified to accept any barrel contour 

offered by Ruger - .25-06, .270, .280, 7x57, 7mm, .30-06, .300. 

5232-___ *Ruger M77 MKII, Short Action 


offered by Ruger - .22-250, .223, .243, 6mm. 

5233-___ *Ruger M77 MKII, Long Action, Left Hand 


offered by Ruger - .25-06, .270, .280, 7x57, 7mm, .30-06, .300. 


5292-___ Ruger Mini 14/30 

Serial # 181-00000 and above. Length of pull 

extended to 14", pistol grip extended. NO CHECKERING. 

5061-___ *Sako A/V L61R, Long Action 

Fits standard Sporter, Hunter, Safari, Classic and Deluxe models - 

.25-06, .270, .280, 7mm, .300, .338, .375. 

5065-___ *Sako A-II L579, Medium Action 

Fits Forester Action, can be modified to fit Varmint heavy barrel, 

Hunter, Classic and Deluxe models - .22-250, .243, 7mm-08, .308. 

28 - Advantage Camouflage 

5161-___ *Sako A-III L61R, Long Action 

Fits Finnbear action with short tang - .25-06, .270, .30-06. 

5071-___ Savage, Long Action, Blind Magazine 

Fits all long action "three digit models" (such as Model 110, 111, etc.) 

with standard contour barrel and top loading internal magazine. 

5072-___ Savage, Short Action, Blind Magazine 

Fits short action "two digit models" (such as Model 10, 10GY, 11F, 

etc.) with standard contour barrel and top loading internal magazine. 

21 - Snow NaturalGear 

The solid throughout Carbelite Classic stock withstands more abuse 

than a wood or hollow plastic stock and is unaffected by atmospheric conditions. 

All our stocks are designed to reduce recoil and withstand temperature extremes, moisture and hard use. 












5081-___ *Smith & Wesson 1500, Long Action 


5082-___ *Smith & Wesson 1500, Short Action 


5191-___ Springfield 1903/A3, Long Action 

Sporter style, stock can be modified to fit most Springfield 1903’s - 

.30-06. 

5081-___ *Weatherby Vanguard, Long Action 


5082-___ *Weatherby Vanguard, Short Action 


5101-___ *Weatherby MK V, Long Action 

Fits Japanese and U.S.A. actions with one piece floorplate only, inletting 

required for second recoil lug on the barrel in calibers .378 and 

above, extensive modifications required to fit German actions - 

.240, .257, .270, 7mm, .30-06, .300, .340, .378, .416, .460. 

5103-___ *Weatherby MK V, Long Action, Left Hand 

Fits Japanese and U.S.A. actions, inletting required for second recoil 

lug on the barrel in calibers .378 and above, extensive modifications 

required to fit German actions - .240, .257, .270, 7mm, .30-06, .300, 

.340, .378, .416, .460. 

19 - NaturalGear 

5041-___ *Winchester Mod 70 Post-64, Long Action 

Fits current models with hinged floor plate, barrel channel with 

sight lug requires slight modification, short action with magazine 

area block - .25-06, .257, .264 .270, 7x57, .30-06. 

5042-___ Winchester Mod 70 Post-64, Short Action 

Fits current models with hinged floor plate and short action featherweights, 

barrel channel with sight lug requires slight modification, 

short action with magazine area block must use Long Action Stock - 

.22-250, .223, .243, .250, .308. 

5241-___ Winchester Mod 70 Post-64, Featherweight, Long Action 

Fits current model with hinged floor plate and trigger guard - .270, 

.30-06. 

5141-___ *Winchester Mod 70 Pre-64, Long Action 

Fits standard barreled action with hinged floorplate and trigger 

guard - .257, .270, .30-06. 

*Barrel channel and magazine box area modifications may be 

required for magnum calibers and/or heavy barrels. 

Magnum calibers will require embedded steel lug. (i.e. .300, 

.338, .375, .378, .416, .458, .460, etc.) 














Bell and Carlson Carbelite Classic butt stocks and 

forearms are rugged, impervious to weather, won’t shrink or 

crack like wood stocks and are made with the same care and precision 

as our one piece stocks. Two piece rifle and shotgun stocks are available in all 

twenty-one finishes and feature a quality recoil pad and checkered pistol grip and forearm. 

6638-___ Browning BAR Post 79 Standard 

.243, .270, .30-06, .308. 

6658-___ Browning BAR Post 79 Magnum 7mm, .300, .338. 

6668-___ Browning BAR Safari Mark II Standard 

Fits current model action - .243, .270, .30-06, .308. 

Will fit most lightweight actions with minor modifications. 

6678-___ Browning BAR Safari MKII Magnum 

Fits current model action - 7mm, .300, .338. 

Will fit most lightweight actions with minor modifications. 

11 - Mossy Oak ® Breakup 

6628-___ Remington Model 742/7400 

Fits current model action, all calibers, modifications on forearm cap 

due to variations may be necessary, metal sleeve from wood forearm 

will not be necessary, BDL requires purchase of forearm cap. 

6618-___ Remington Model 760 Post-81 

Fits current model action - all calibers. 

6648-___ Remington Model 760 Pre-81 

Fits all calibers. 

6618-___ Remington Model 6/7600 

Fits current model action, all calibers. 


6688-___ Ruger #1 

Fits current model action with 26” medium weight sporter barrel, 

modification will be necessary for heavy or lightweight barrels - 

.243, .270, 7x57, .30-06. 

6698-___ T/C Contender Thumbhole Buttstock 

Fits current model action with 16” barrel, forearm can be fit to 21” 

barrel, NOTE: THUMBHOLE STOCK REQUIRES 16” OR LONGER 

BARREL TO BE LEGAL. Stock can be used for either right or left 

handed shooters, barrel channel modifications may be required for 

magnum calibers and/or heavy barrels - all calibers. 







13 - Freedom Green 

03 - Carbelite Camo 






29 - Trebark ® Superflauge 

by Lynch 

8428-___ Benelli Super Black Eagle/M1 Super 90 

12 gauge. 

8548-___ Browning A-5, 2 3/4” 

Fits current model actions, due to variations in action manufacture 

modifications may be required - 12 gauge only. 

8558-___ Browning A-5, 3” Magnum 



8618-___ Browning BPS Fits current model actions - 12 gauge only. 

8568-___ Mossberg 500 Fits current model actions - 12 gauge. 

8528-___ Remington 870 

Fits current model actions, forearm requires a special forearm wrench 

to remove the factory wood forearm - 12 gauge. 

8518-___ Remington 1100 Fits current model actions - 12 gauge. 

8538-___ Remington 11-87 Fits current model actions - 12 gauge. 

With Monte Carlo Cheekpiece 

The buttstock features a raised Monte Carlo roll-over cheekpiece for 

proper eye to scope alignment. The pistol grip is extended and 

includes a slight palm swell for fast target acquisition and accuracy. 

28 - Advantage Camouflage 

2548-___ Browning A-5, 2 3/4” 



2558-___ Browning A-5, 3” Magnum 



2528-___ Remington 870 

Fits current model actions, forearm requires a special forearm wrench 

to remove the factory wood forearm - 12 gauge only. 

2518-___ Remington 1100 

Fits current model actions - 12 gauge only. 

2538-___ Remington 11-87 













The Premier Thumbhole line of stocks offer a beautiful 

design that gives the shooter a better fit for comfort and accuracy. 

Combining the beauty and functionality of the Premier stock designs 

with the durability of the unequaled Bell and Carlson composite material 

makes this line of stocks a superb choice for the sportsman looking for perfection! 

Premier Thumbhole features include: 

• Thumbhole with palm swell for a better grip and reduced recoil 

• Monte Carlo cheekpiece for more precise and quicker target acquisition 

• Pachmayr Decelerator Recoil Pad • Uncle Mike's Swivel Studs • Choice of twenty-one different finishes 

T111-___ *Interarms Mark X, Long Action 

Fits current model action or short action with magazine area block - 

.22-250, .243, .25-06, .270, .308, .30-06. 

T051-___ Mauser 98, Long Action 

Fits sporter action with taper barrel without adjustable trigger, 

because of multiple origins of manufacture and variations in actions 

modifications may be required - .30-06. 

T021-___ *Remington 700 BDL, Long Action 

Fits models with hinged floorplate, 700 Safari Grade and Classic with 

modifications to barrel channel and magazine box area, when 

replacing factory stocks longer action screws may be required - .25- 

06, .270, .280, 7mm, .30-06. 

T023-__ *Remington 700 BDL, Long Action, Left Hand 

Fits models with hinged floorplate, fits 700 Safari Grade and Classic 

with modifications to barrel channel and magazine box area, when 

replacing factory stocks longer action screws may be required - .25- 

06, .270, .280, 7mm, .30-06. 

T011-___ *Remington 700 ADL, Long Action, Blind Magazine 

Fits current model and Sportsman 78 action,when replacing factory 

stocks longer action screws may be required - .25-06, .270, .280, 

7mm, .30-06, .300. 

T261-___ Remington 700 BDL, Long Action Detachable Mag. 

T031-___ *Ruger 77, Long Action 


offered by Ruger - .25-06, .270, .280, 7x57, 7mm , .30-06, .300. 

T101-___ *Weatherby MK V, Long Action 

Fits Japanese and U.S.A. long actions, inletting required for second 

recoil lug on the barrel in calibers .378 and above, extensive modifications 

required to fit German actions - .240, .257, .270, 7mm, .30- 

06, .300, .340, .378, .416, .460. 

T041-___ *Winchester Mod 70 Post-64, Long Action 

Fits current models with hinged floor plate, barrel channel with sight 

lug requires slight modification, short action with magazine area 

block - .25-06, .257, .264, .270, 7x57, .30-06. 

*Barrel channel and magazine box area modifications may be required for magnum calibers and/or heavy barrels. 

Magnum calibers will require embedded steel lug. (i.e. .300, .338, .375, .378, .416, .458, .460, etc.) 












Bell and Carlson Special Services 

9955-00 . . . . . . Pachmayr DeceleratorTM Pad, Installed 

9841-00 . . . . . . . Bell and Carlson Recoil Pad, Installed 

9803-00. . . . . . . . . . . . . . . . . Reinforcement in lug area 

Bell and Carlson Upgrades and Accessories 

9959-00 . . . . . . . . . . . . . . . . . Three Way Butt Assembly 

9958-00 . . . . . . . . . . . . . . . . . . Two Way Butt Assembly 

9956-00 . . . . . . . . . Harris #6 Rail Stud, 3/8” European 

9945-00 . . . . . . . . . . . . . . . Pachmayr DeceleratorTM Pad 













9802-00. . . . . . . . . . . . . . . . . . . . Change Length of Pull 

9821-00. . . . . . Refinish Bell and Carlson Stock (Paint) 

9822-00 . . . . . . . . . . . . . . Camo Bell and Carlson Stock 

9851-00 . . . . . . . . . . . Bell and Carlson Rifle Recoil Pad 

9852-00. . . . . . . . Bell and Carlson Shotgun Recoil Pad 

9901-00 . . . . . . . Remington 700 guard screws, set of 3 


Bell and Carlson is pleased to introduce 

the new DuraMaxx TM Heavy Barrel Stock 

to fit Savage long and short action 

varmint and tactical rifles. 

The DuraMaxx is a “drop-in” stock that's 

more affordable than our top of the line 

fiberglass/aramid/carbon fiber stock 

but still provides the strength, 

beauty and functionality 

that all of our products 

are known for. 

7112-___ Savage, Long Action, Blind Magazine 

Fits all long action "three digit models" (such as Model 110, 

111, etc.) with standard contour barrel and top loading internal 

magazine. Fits Accu-Trigger. 















The DuraMaxx stock was 

specially designed for the 

hunter/shooter to be versatile 

enough to be used for off-hand, 

bipod or benchrest use. This 

“drop-in” stock comes complete 

with aluminum pillar bedding 

and a Pachmayr Decelerator pad. 

The stock is designed for a “free-floating” 

barrel, has no checkering and is available 

in all the finishes we offer, including our 

popular Spiderweb and camouflage patterns. 

7110-___ Savage, Short Action, Blind Magazine 

Fits all short action "two digit models" (such as Model 10, 

10GY, 11F, etc.) with standard contour barrel and top loading 

internal magazine. Fits Accu-Trigger. 












Maximizing the accuracy and appearance of a Ruger 10/22 starts with a Bell and Carlson stock featuring 

solid structural urethane with aramid, graphite and fiberglass construction. With your choice of seven 

stock styles and twenty-one finish options, Bell and Carlson is clearly the only choice for accuracy. 

Odyssey Target Style Stock 


Features such as an adjustable comb with an aluminum forearm rail for attachments, downward 

front to rear tapered forearm for minute elevation adjustments and vented forearm make this the 

only choice of performance minded shooters. With 2 or 3 way adjustable butt assemblies. 

2033-__ Odyssey, 2-way Butt Assembly 

2032-__ Odyssey, 3-way Butt Assembly 

Anschutz Style Target Stock 

Sportsman Team Challenge Heavy Barrel - Although this style Anschutz can be used for any purpose, 

it has been specifically designed for use in Team Challenge competition. Scope use only. 

AO32-__ Anschutz Sportsman Style Target, Heavy Barrel 

Target/Varmint Style Stock 

Full size stock with an extended grip for stability and comfort. It has a fairly wide forend and dual 

front sling studs and also has a “thumb hook” for additional stability when shooting off a bag or 

rest. Has a slightly tapered forend to allow for quick and easy elevation adjustments. 

AJ32-__ Target/Varmint Style 

Anschutz Style Thumbhole Stock 

The Anschutz Style Thumbhole combines the great features of the Anschutz style and the great 

feel and improved control of a thumbhole stock. The palm-swell grip fits the hand like a glove! 

AT32-__ Anschutz Thumbhole, Heavy Barrel 

Premier Thumbhole Stock 

The Premier combines beauty with functionality for more comfort and accuracy, featuring a 

Monte Carlo cheekpiece and thumbhole with palm swell for better grip and reduced recoil. 

Heavy barrel contours. 

T032-__ Premier Thumbhole, Heavy Barrel 

Heritage Sporter Style Stock 

The Heritage Sporter Style Stock with cheekpiece features distinctive styling with all the accuracy 

and durability common to all of the Bell and Carlson stocks. Heavy barrel contours. 

P032-__ Heritage Sporter with Cheekpiece, Heavy Barrel 

Classic Style Stock 

Featuring the classic design without cheekpiece, this stock 

works for both right hand and left hand shooters. This stock is 

a true drop-in and installs in minutes. Heavy barrel contours. 

4032-__ Classic, Heavy Barrel 
















35 - Mossy Oak ® Brush 

Extended 

Mag Release 

0030-00 For Ruger 10/22 













Bell and Carlson is pleased to announce that we now have the ability to apply a variety 

of camouflage patterns to your existing firearms by using the same process that is being 

used by original equipment manufacturers on new guns sold today. You are no longer 

limited to only the finishes being offered on some of the new firearms! 

• Better Concealment! 

• Increased Value! 

• Reduced Maintenance! 

SHIPPING PROCEDURES: Make sure the firearm is NOT loaded. Scopes, slings, etc. should be 

removed before shipping. Bell and Carlson will not be responsible for damage to the firearm, parts 

or accessories. The firearm should be shipped in a “hard-shell” (plastic or metal) gun case and 

wrapped carefully to prevent damage in shipping. 

WARRANTY: All parts returned for warranty MUST be pre-approved by Bell and Carlson and 

MUST be accompanied with a Return Authorization number. Bell and Carlson will be responsible 

ONLY for defects in materials and workmanship relating to the supplied finish for one year. Bell 

and Carlson will not assume any responsibility for damage to the firearm, parts or accessories. 

PAGE 14 © 2009 BELL AND CARLSON TEL: 620-225-6688 

TM

Mossy Oak ® Shadow Grass ® 

Mossy Oak ® Breakup ® 

Mossy Oak ® NEW Breakup ® 

Trebark ® Superflauge TM by Lynch 

Skyline Excel TM 

Realtree Hardwoods ® Green HD 

Advantage Camouflage 

NaturalGear TM 

Snow NaturalGear TM 

Freedom Tan TM 

Freedom Green TM 

www.bellandcarlson.com © 2009 BELL AND CARLSON PAGE 15 

TM

Made in the U.S.A., designed for entertainment 

and to generate interest in target and 

recreational shooting. Let's face it, it's just not 

that much fun shooting at paper targets. It's 

also a real problem figuring out what to attach 

them to and how to hang them. 

The low cost, easy setup and unlimited versatility of the EZ- 

Roost is why it is considered the "Ultimate Target System". 

Plus, it's really fun to shoot at a target that actually breaks! 

It's much more fun than just punching holes in paper. 

The EZ-Roost is designed primarily to be used for small and 

large rifles and pistols at 5 to 500 yards, but it is also a great 

target for BB/pellet guns and archery. Setting up is as easy as 

inserting the metal post into the ground, sliding the target 

holder onto the post and positioning a standard 4 1/2" clay 

target in the holder. 

The EZ-Roost comes complete with four target holders and 

four mounting posts and is packaged in a clamshell for easy 

display. The holders are designed to be used with the metal 

posts included, but they will also fit on a common 3/8" steel 

post, such as electric fence posts, dowels, etc. 

EZ-Roost Target System 

SKU # EZ2003 

101 Allen Road • Dodge City, KS 67801 

620-225-6688 • Fax: 620-225-9095 


Website: www.bellandcarlson.com

bc cat04 - Bell and Carlson

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?