Polyflex 65 - Irish Tar & Bitumen Suppliers
Polyflex 65 - Irish Tar & Bitumen Suppliers
Polyflex 65 - Irish Tar & Bitumen Suppliers
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
POLYFLEX <strong>65</strong><br />
POLYMER MODIFIED BITUMEN<br />
The <strong>Polyflex</strong> binder range consists of high polymer content sBs modified bitumens.<br />
PRINcIPaL aPPLIcaTION<br />
<strong>Polyflex</strong> <strong>65</strong> is mainly used in thin layer surface courses (thin layer asphalt). It is also used in stone<br />
mastic asphalt (SMA). The binder is also recommended for asphalt concrete or macadam base/<br />
binder courses where increased flexibility of the pavement layer is required.<br />
aDvaNTagEs OF POLYFLEX IN HOT MIXEs<br />
• Improved durability.<br />
• Better aggregate coating.<br />
• Increased resistance to rutting.<br />
• Improved ageing properties.<br />
• Increased resistance to fatigue.<br />
• Improved performance at extreme road temperatures.<br />
BRINgINg QUaLITY TO THE sURFacE
Property Unit Test Method specification<br />
Typical<br />
value<br />
Penetration @25ºC 0.1mm IS EN 1426 <strong>65</strong>-105 80<br />
Softening Point ºC IS EN 1427 ≥60 70<br />
Fraas Brittle Point ºC IS EN 12593 ≤-12 -20<br />
Storage Stability ºC IS EN 13399 ≤5 0<br />
Resistance to<br />
Hardening:<br />
Mass Change<br />
Retained Penetration<br />
Softening Point increase<br />
Softening Point decrease<br />
%<br />
%<br />
ºC<br />
%<br />
BENEFITs OF UsINg sBs POLYMER<br />
Styrene-Butadiene-Styrene (SBS) gives bitumen the following properties:<br />
• Enhanced storage stability.<br />
• Increase in viscosity/stiffness.<br />
• Increase in softening point.<br />
• Decrease in brittle point.<br />
• Increase in tensile strength.<br />
• Increase in ductility.<br />
The <strong>Polyflex</strong> range also includes <strong>Polyflex</strong> 75 and <strong>Polyflex</strong> 90.<br />
<strong>Polyflex</strong> 75 is recommended for use in Porous Asphalt.<br />
<strong>Polyflex</strong> 90 is recommended for surface course mixes which require additional<br />
binder film thickness to improve durability and rut resistance.<br />
Recommended Temperature:<br />
Recommended Storage Temperature 1<strong>65</strong>°C<br />
The storage temperature should not exceed 200°C<br />
IS EN 12607-1:200<br />
IS EN 1426<br />
IS EN 1427<br />
IS EN 1427<br />
BRINgINg QUaLITY TO THE sURFacE<br />
sPEcIFIcaTION<br />
<strong>Polyflex</strong> <strong>65</strong> complies with the requirements of I.S. EN 14023:2005 (Specification for Polymer<br />
Modified <strong>Bitumen</strong>s) and The NRA Binder Specifications.<br />
≤1<br />
≥60<br />
≤8<br />
≤2<br />
.01<br />
<strong>65</strong><br />
0<br />
1.3<br />
Available from<br />
<strong>Irish</strong> <strong>Tar</strong> & <strong>Bitumen</strong> <strong>Suppliers</strong>, Alexandra Road, Dublin 1<br />
Tel: 01 855 5117 / Fax: 01 855 4262 / Email: info@irishtar.ie / www.irishtar.ie<br />
<strong>Irish</strong> <strong>Tar</strong> & <strong>Bitumen</strong> <strong>Suppliers</strong> is registered to IS EN ISO 9001:2008 Quality Standard