Explosion Protected Products - Acasa | Intec Automatizari

1.10
E X - T O R C H L I G H T
Stabex MO
The Stabex M0 was specially developed as
an inspection lamp for gas or empty mineral
oil tanks where the permanent hazard of
an explosive gas atmosphere exists.
The Stabex M0 explosion-protected torch has
specifically been approved for use in Zone 0
hazardous areas up to the temperature class T6,
and also fulfills the ATEX-Directive 94/9/EG.
The Zone 0 safety requirements are met, since
a permanent overlapping of 2 to 3 explosion
categories is provided for. The torchlight may
be operated in the Zone 0 without additional
safety measures up to a height of 5 metres
above ground level. After use, the lamp must
not be left in the Zone 0 hazardous areas.
The rotary switch is designed for singlehanded
operation. Even when safety gloves are worn, it
can be operated without difficulty. The housing
of the extremely robust torch is made of
stainless steel and bronze which prevents
the generation of ignitable sparks due to
impact. The multipart front pane is made of
mineral safety glass. The torch is equipped
with 2 dry cells size D according 8 IEC 86 LR20
which are impact-protected by a metal sheath.
Zone 0
Extremely robust housing made
of stainless steel and bronze
Ergonomic switch design makes it
suitable for operation with safety gloves
International Approvals