Explosion Protected Products - Acasa | Intec Automatizari

More documents

Recommendations

Info

1.10 E X - T O R C H L I G H T Stabex MO The Stabex M0 was specially developed as an inspection lamp for gas or empty mineral oil tanks where the permanent hazard of an explosive gas atmosphere exists. The Stabex M0 explosion-protected torch has specifically been approved for use in Zone 0 hazardous areas up to the temperature class T6, and also fulfills the ATEX-Directive 94/9/EG. The Zone 0 safety requirements are met, since a permanent overlapping of 2 to 3 explosion categories is provided for. The torchlight may be operated in the Zone 0 without additional safety measures up to a height of 5 metres above ground level. After use, the lamp must not be left in the Zone 0 hazardous areas. The rotary switch is designed for singlehanded operation. Even when safety gloves are worn, it can be operated without difficulty. The housing of the extremely robust torch is made of stainless steel and bronze which prevents the generation of ignitable sparks due to impact. The multipart front pane is made of mineral safety glass. The torch is equipped with 2 dry cells size D according 8 IEC 86 LR20 which are impact-protected by a metal sheath. Zone 0 Extremely robust housing made of stainless steel and bronze Ergonomic switch design makes it suitable for operation with safety gloves International Approvals
Technical data Stabex M0 Marking to 94/9/EC II 1 G EEx ib ed IIC T6/T4 EC-Type Examination Certificate PTB 99 ATEX 2197 X Permissible ambient temperature -20 °C to +40 °C Incandescent lamp 2.5 V/0.3 A specified data: 0 °C to +30 °C (battery) Light aperture Ø 44 mm, mineral glass Battery 2 dry cells IEC 60086 R 20/LR 20 (T6/T4) Operating time approx. 12 h (alcaline battery) Luminous flux approx. 12 lm Degree of protection accd. EN 60529 IP65 Weight approx. 2.2 kg (without battery) Enclosure material Stainless steel/bronze Max. permitted height of fall 5 m Ordering details ⎮ Accessories Type Scope of delivery Order No. I Stabex M0 I Stabex M0 Stabex M0 with incandescent lamp and battery 1 1350 000 001 Accessories for Ex-torchlight Stabex mini Type OU Order No. 1 incandescent lamp 2.5 V/0.3 A 5 1 2041 820 000 Protective sheath for battery 1 3 1350 001 024 Dimension drawing ⎮ Range-diagram 195 Stabex MO Ø 80 Ø 43 Phase out type Range-diagram Stabex MO COOPER CROUSE-HINDS GMBH 1.11 14 63 2 70 2,5 10 120 cm/Ø 1 Lux 16 m Dimensions in mm 1 2 3 4 5 6 7 8 9 10 11 12
Page 1 and 2: 1005 Catalogue Explosion-Protected
Page 3 and 4: 2 4 6 8 10 12 EX-FLUORESCENT LIGHT
Page 5 and 6: A Regulations on Explosion-Protecti
Page 7 and 8: C Hazardous Areas due to Explosive
Page 9 and 10: DHazardous Areas due to explosive D
Page 11 and 12: PTB Nr. Ex-92.C.1801 EEx ed IIC T4
Page 13 and 14: H Regulations and Approvals Outside
Page 15 and 16: Chemical Stability of Plastics Mate
Page 17 and 18: PORTABLE EX-LAMPS INFORMATION ON EX
Page 19 and 20: Focussing Stabex HF Focussing HE 8
Page 21 and 22: The right light for every type of o
Page 23 and 24: I Stabex mini II I Stabex mini LED
Page 25: I Stabex mini II I Stabex mini LED
Page 29 and 30: I HE 5 EN I HE 8 N EN I HE 8 EURO/H
Page 31 and 32: I HE 5 EN I HE 8 N EN I HE 8 EURO/H
Page 33 and 34: SEB 8/SEB 8 L as search and work li
Page 35 and 36: Technical data I SEB 8/9 I SEB 8/9
Page 37 and 38: I SEB 8/9 I SEB 8/9 L I SEB 8 ADR I
Page 39 and 40: Technical data HLE 7 L EN Marking t
Page 41 and 42: Application range The powerful, exp
Page 43 and 44: Ordering details Type with Lamp Lum
Page 45 and 46: I Ex-lamps with electronic ballasts
Page 47 and 48: Technical data Transport trolley wi
Page 49 and 50: EX-FLUORESCENT LIGHT FITTINGS EX-LI
Page 51 and 52: one sided through-wiring Type 1/6 I
Page 53 and 54: generously dimensioned terminal com
Page 55 and 56: Polar curves Polar curve During the
Page 57 and 58: EVG-Capsulation Robust technology f
Page 59 and 60: To be able to run on the CEAG emerg
Page 61 and 62: Technical data eLLK 92018/18 ⎮ eL
Page 63 and 64: Ordering details I eLLK 92... (18-5
Page 65 and 66: 90 Dimension drawing ⎮ Polar curv
Page 67 and 68: I Intelligent Battery Technology -
Page 69 and 70: Technical data I eLLK 92018/18 NIB
Page 71 and 72: Accessories I eLLK 92018/18 NIB I e
Page 73 and 74: Dimension drawing 13 20 Eye bolt M8
Page 75 and 76: I eLLB 20018/18 I eLLB 20036/36 I e
Page 77 and 78:
I eLLB 20018/18 I eLLB 20036/36 I e
Page 79 and 80:
I eLLB 20018/18 I eLLB 20036/36 I e
Page 81 and 82:
LED: ✴ Battery set NIB = flashing
Page 83 and 84:
Ordering details I eLLB 20018/18 NI
Page 85 and 86:
Dimension drawing ⎮ Polar curve P
Page 87 and 88:
Technical data RLF 250... / RLF-INO
Page 89 and 90:
Wall bracket set Wall-/ceiling moun
Page 91 and 92:
Wall-/ceiling mounting swivel Beste
Page 93 and 94:
Wall-/ceiling mounting Dimension dr
Page 95 and 96:
Technical data AB 12...E with elect
Page 97 and 98:
Ordering details I AB 12...E I with
Page 99 and 100:
Technical data EVF...E Marking to 9
Page 101 and 102:
Ordering details I EVF...E with ele
Page 103 and 104:
COOPER CROUSE-HINDS GMBH 2.55 1 2 3
Page 105 and 106:
Technical data I nLLK 08018/18 I nL
Page 107 and 108:
I nLLK 08018/18 I nLLK 08036 I nLLK
Page 109 and 110:
90 I nLLK 08018/18 I nLLK 08036 I n
Page 111 and 112:
I nLLK 08018/18 N I nLLK 08036/36 N
Page 113 and 114:
I nLLK 08018/18 N I nLLK 08036/36 N
Page 115 and 116:
Page 117 and 118:
Technical data SG-Ex RFE Marking to
Page 119 and 120:
Ordering details Type Description O
Page 121 and 122:
Dimension drawing 1900 Light pole 9
Page 123 and 124:
Dimension drawing Accessories 250 7
Page 125 and 126:
Cooper Crouse-Hinds © 2009 - all r
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
EX-CEILING, PENDANT LIGHT FITTINGS
Page 149 and 150:
Bulk head light fitting AB 05 I Ex-
Page 151 and 152:
Technical data Ex-Bulkhead light fi
Page 153 and 154:
Technical data Ex-Bulkhead light fi
Page 155 and 156:
Ordering details Type Entry thread
Page 157 and 158:
Technical data AB 50 ⎮ SPG 1N I E
Page 159 and 160:
Technical data AB 51 IU ⎮ AB 51 I
Page 161 and 162:
I Ex-Pendant light fittings I EVI 5
Page 163 and 164:
90 Dimensions drawing ⎮ Polar cur
Page 165 and 166:
I Ex-Pendant light fitting I EVQ 85
Page 167 and 168:
Ordering details I Ex-Pendant light
Page 169 and 170:
Page 171 and 172:
Technical data dHLS 85250 ⎮ dHLS
Page 173 and 174:
Page 175 and 176:
Technical data FZD 04 Ballast enclo
Page 177 and 178:
Technical data FZD EN Marking to 94
Page 179 and 180:
I Ex-Floodlight I Swivel bracket Mo
Page 181 and 182:
Technical data PX 04... Marking to
Page 183 and 184:
90 Dimensions drawing PX 04 M25 546
Page 185 and 186:
Technical data dTLS 85250 / dTLS 85
Page 187 and 188:
Page 189 and 190:
Technical data GHG 664 Marking to 9
Page 191 and 192:
Page 193 and 194:
Technical data I Ex-Tank inspection
Page 195 and 196:
Page 197 and 198:
Technical data NVMV NVMV CHAMP for
Page 199 and 200:
Dimensions drawing 285 294 Ø 254 1
Page 201 and 202:
Technical data NFMV Marking to 94/9
Page 203 and 204:
Technical data NSSFMV Stainless Ste
Page 205 and 206:
Page 207 and 208:
Accessories Lamps for pendant light
Page 209 and 210:
EX-AUDIO/VISUAL-SIGNALLING EQUIPMEN
Page 211 and 212:
ALARM, SIGNAL AND CONTROLL EQUIPMEN
Page 213 and 214:
Technical data Type BG2 E/I EC-Type
Page 215 and 216:
Ordering details I BGI, PBI, BGE, P
Page 217 and 218:
Ordering details I Ex-Manual call p
Page 219 and 220:
Ordering details I Ex-Break glass c
Page 221 and 222:
Technical data XB 11 SL Range EC-Ty
Page 223 and 224:
Ordering details I Ex-Status lamps
Page 225 and 226:
Temperature classifications I Ex-St
Page 227 and 228:
Ordering details I Ex-Status lamps
Page 229 and 230:
Technical data XB 9 EC-Type Examina
Page 231 and 232:
Ordering details SM 87 with eXLink
Page 233 and 234:
Ordering details XB 11 with eXLink
Page 235 and 236:
Ordering details I Ex-10/15 Joule f
Page 237 and 238:
Ordering details I Ex-15 joule flas
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Technical data TH 12 Marking to 94/
Page 245 and 246:
Page 247 and 248:
Ordering details Ordering options*
Page 249 and 250:
Ordering details I Ex-10 W steady f
Page 251 and 252:
Ordering details I Ex-100 W steady
Page 253 and 254:
Ordering details I Ex-100 W steady
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Technical data DB 6 Marking to 94/9
Page 261 and 262:
Page 263 and 264:
Ordering details DB 3 with eXLink I
Page 265 and 266:
Ordering options* I Ex-110 dB(A) vo
Page 267 and 268:
Technical data DB 7 Marking to 94/9
Page 269 and 270:
Technical data DB 10 Marking to 94/
Page 271 and 272:
Ordering details I Ex-8/25 watt spe
Page 273 and 274:
Ordering details I Ex-25/30 watt sp
Page 275 and 276:
Technical data DB 19 Marking to 94/
Page 277 and 278:
Technical data HD 1 Marking to 94/9
Page 279 and 280:
ELECTRICAL CONNECTIVITY EXLINK 4-PO
Page 281 and 282:
What is eXLink? I What is eXLink? I
Page 283 and 284:
Function The self-cleaning Ex-e mul
Page 285 and 286:
Technical data eXLink 4-pole / 4-po
Page 287 and 288:
For customers who wants to configur
Page 289 and 290:
I eXLink 4-pole + PE I with locking
Page 291 and 292:
I eXLink 4-pole + PE I with locking
Page 293 and 294:
Ordering key eXLink receptacle 4-po
Page 295 and 296:
Ordering key eXLink inlet 4-pole +
Page 297 and 298:
Ordering key eXLink inlet 4-pole +
Page 299 and 300:
Ordering key eXLink plug/coupler fo
Page 301 and 302:
Dimension drawing eXLink Plug metal
Page 303 and 304:
Innovative connectors for Ethernet
Page 305 and 306:
Technical data eXLink USB 4-pole I
Page 307 and 308:
Technical data eXLink 6+1-pole / 7-
Page 309 and 310:
For customers who wants to configur
Page 311 and 312:
Ordering key eXLink coupler 6+1-pol
Page 313 and 314:
Ordering key eXLink inlet 6+1-pole/
Page 315 and 316:
Ordering key eXLink plug/coupler fo
Page 317 and 318:
Dimension drawings eXLink 6+1-pole
Page 319 and 320:
Y-junction-box 2 x cable glands Inl
Page 321 and 322:
1. Pole No. 5 = 4-pole 6 = 4-pole +
Page 323 and 324:
Page 325 and 326:
Technical data Type 791 01 ⎮ Type
Page 327 and 328:
Ordering details I Explosion protec
Page 329 and 330:
Page 331 and 332:
Technical data Model ExTerm Marking
Page 333 and 334:
Ordering details I Model ExTerm - 2
Page 335 and 336:
Internal wiring / Dimension drawing
Page 337 and 338:
CEE plugs and receptacles A first s
Page 339 and 340:
Technical data Ex-transformer plug
Page 341 and 342:
Ordering details I 16A 2-pole up to
Page 343 and 344:
Ordering details I 16A 3-pole, 4-po
Page 345 and 346:
I 16A 3-pole, 4-pole and 5-pole up
Page 347 and 348:
Ordering details I 32A 4-pole up to
Page 349 and 350:
I 32A 4-pole up to 690 V I I 32A 5-
Page 351 and 352:
Dimension drawing Transformer plug
Page 353 and 354:
Ordering details I 63 A 4- and 5-po
Page 355 and 356:
Technical data Ex-plugs and recepta
Page 357 and 358:
Dimension drawing ⎮ Wiring diagra
Page 359 and 360:
Ordering details Type h Cable entry
Page 361 and 362:
I 20A 7-pole up to 500 V I Wall soc
Page 363 and 364:
Technical data Ex-protected plug an
Page 365 and 366:
Technical data I Zone 2: 16A 3-pole
Page 367 and 368:
I Zone 2: 16A 3-pole, 4-pole and 5-
Page 369 and 370:
Technical data I Zone 2: 32A 4-pole
Page 371 and 372:
I Zone 2: 32A 4-pole and 5-pole up
Page 373 and 374:
Technical data Ex-plugs and recepta
Page 375 and 376:
Page 377 and 378:
Ordering details I Zone 2: 125A 4-
Page 379 and 380:
COOPER CROUSE-HINDS GMBH 6.101 1 2
Page 381 and 382:
Technical data I Industrial use: 16
Page 383 and 384:
I Industrial use: 16A 3-pole, 4-pol
Page 385 and 386:
Page 387 and 388:
I Industrial use: 32A 4-pole and 5-
Page 389 and 390:
Page 391 and 392:
I Industrial use: 63A 4-pole and 5-
Page 393 and 394:
Ordering details I Industrial use:
Page 395 and 396:
Page 397 and 398:
Technical data I Ex-Repair- and Mai
Page 399 and 400:
I Ex-Repair- and Maintenance: 16A 3
Page 401 and 402:
Ordering details I Ex-Repair- and M
Page 403 and 404:
Ordering details I Ex-Repair- and M
Page 405 and 406:
Technical data Repair receptacle di
Page 407 and 408:
Technical data 16A 3-pole ⎮ 16A 5
Page 409 and 410:
Technical data I Ex-Cable reel: 16A
Page 411 and 412:
6.134 EX-PROTECTED PORTABLE POWER S
Page 413 and 414:
I Ex-protected portable power suppl
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
I Ex-Terminal and Junction boxes I
Page 423 and 424:
7.4 E X - J U N C T I O N B O X Pla
Page 425 and 426:
I Ex-junction boxes 791 I GHG 791 0
Page 427 and 428:
7.8 E X - J U N C T I O N B O X E S
Page 429 and 430:
7.10 U N I V E R S A L T E R M I N
Page 431 and 432:
I Ex-e/Ex-i terminal box I GHG 791
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
Page 443 and 444:
I Ex-e/Ex-i terminal box I Ordering
Page 445 and 446:
7.26 E X - T E R M I N A L B O X E
Page 447 and 448:
Page 449 and 450:
Page 451 and 452:
7.32 E X - T E R M I N A L B O X E
Page 453 and 454:
I Ex-d terminal box I Type C30 Type
Page 455 and 456:
7.36 E X - T E R M I N A L E N C L
Page 457 and 458:
Page 459 and 460:
I Ex-e terminal enclosures I NEXT O
Page 461 and 462:
Page 463 and 464:
Page 465 and 466:
Page 467 and 468:
Page 469 and 470:
I Ex-e/Ex-i terminal enclosures I 1
Page 471 and 472:
I Ex-e/Ex-i terminal enclosures I E
Page 473 and 474:
Page 475 and 476:
Page 477 and 478:
Page 479 and 480:
Page 481 and 482:
Page 483 and 484:
I Ex-e Terminal enclosures I STB ST
Page 485 and 486:
I Ex-e Terminal enclosures I STB Or
Page 487 and 488:
I Ex-e Terminal enclosures I STB Or
Page 489 and 490:
I Ex-e/Ex-i Terminal box I Type 744
Page 491 and 492:
7.72 EX-INTERMEDIATE MOTOR TERMINAL
Page 493 and 494:
I Ex-Intermediate motor terminal bo
Page 495 and 496:
I Ex-Intermediate motor terminal bo
Page 497 and 498:
7.78 FIXING MATERIALS AND ACCESSORI
Page 499 and 500:
I Fitting materials and accessories
Page 501 and 502:
I Fitting materials and accessories
Page 503 and 504:
8.2 E X - C A B L E G L A N D S Pla
Page 505 and 506:
I Ex-cable glands I Cable gland for
Page 507 and 508:
I Ex-cable glands I Cable gland Scr
Page 509 and 510:
I Ex-cable glands I Drainage plug B
Page 511 and 512:
8.10 E X - C A B L E G L A N D S Me
Page 513 and 514:
I Ex-cable glands I ADE 1F ISO Orde
Page 515 and 516:
I Ex-cable glands I ADE 4F ISO Orde
Page 517 and 518:
I Ex-cable glands I Earthing washer
Page 519 and 520:
I Ex-cable glands I Gasket Accessor
Page 521 and 522:
I Ex-cable glands I Shroud Accessor
Page 523 and 524:
I Ex-cable glands I Accessories for
Page 525 and 526:
I Ex-cable glands I Type ADL 1F Ord
Page 527 and 528:
I Ex-cable glands I Type ADL 4F Ord
Page 529 and 530:
I Ex-cable glands I Earth tag Lock
Page 531 and 532:
I Ex-cable glands I Reducing rings
Page 533 and 534:
I Ex-cable glands I Screw plugs Ord
Page 535 and 536:
8.34 COOPER CROUSE-HINDS GMBH
Page 537 and 538:
I Ex-control units and control stat
Page 539 and 540:
9.4 E X - I N S T A L L A T I O N S
Page 541 and 542:
9.6 E X - C O N T R O L S T A T I O
Page 543 and 544:
I Ex-control stations I Type 411 81
Page 545 and 546:
Page 547 and 548:
I Ex-control stations I Accessories
Page 549 and 550:
I Ex-control stations I Type 432...
Page 551 and 552:
Page 553 and 554:
Page 555 and 556:
9.20 E X - C O N T R O L S T A T I
Page 557 and 558:
Page 559 and 560:
I Ex-control stations I Measuring A
Page 561 and 562:
Page 563 and 564:
Page 565 and 566:
Page 567 and 568:
Page 569 and 570:
I Order Code for Individual Control
Page 571 and 572:
Page 573 and 574:
I Ex-control stations I Mounting ar
Page 575 and 576:
Page 577 and 578:
Page 579 and 580:
Page 581 and 582:
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
I Built-in Components I DRT 1 x 2-p
Page 589 and 590:
I Built-in Components I DRT 1 x 2-p
Page 591 and 592:
I Built-in Components I SLT 1 x 2-p
Page 593 and 594:
I Built-in Components I SLS 1 x 2-p
Page 595 and 596:
I Built-in Components I SGTE 1 x 2-
Page 597 and 598:
I Built-in Components I Ordering co
Page 599 and 600:
I Built-in Components I SCT 1 x 2-p
Page 601 and 602:
I Built-in Components I SCT 1 x 2-p
Page 603 and 604:
I Built-in Components I Potentiomet
Page 605 and 606:
I Built-in Components I Technical d
Page 607 and 608:
I Built-in Components I Technical d
Page 609 and 610:
I Built-in Components I Ex 23 Ex 29
Page 611 and 612:
I Built-in Components I MKX 4 UT4 U
Page 613 and 614:
I Built-in Components I Metal flang
Page 615 and 616:
9.80 E X - C O N T R O L A N D S I
Page 617 and 618:
I Ex-Control and signal units for p
Page 619 and 620:
Dimension drawing 68 (Double-)pushb
Page 621 and 622:
Page 623 and 624:
Page 625 and 626:
Key-operated pushbutton Dimension d
Page 627 and 628:
Page 629 and 630:
Mushroom-h.p.-button Mushroom-h.p.-
Page 631 and 632:
Page 633 and 634:
Page 635 and 636:
Control switch GHG 249 Example for
Page 637 and 638:
Page 639 and 640:
Signal lamp Ordering code for Compo
Page 641 and 642:
I Ex-Control and signal units I Mea
Page 643 and 644:
I Accessories I Interchangeable AM7
Page 645 and 646:
I Accessories I Flap (with O-activa
Page 647 and 648:
9.112 E X - C O N T R O L S W I T C
Page 649 and 650:
I Ex-Control switches I GHG 292 GHG
Page 651 and 652:
Page 653 and 654:
9.118 E X - C O N T R O L S W I T C
Page 655 and 656:
Page 657 and 658:
Page 659 and 660:
9.124 L I G H T A L L O Y C O N T R
Page 661 and 662:
9.126 COOPER CROUSE-HINDS GMBH
Page 663 and 664:
I Ex-Safety and main current switch
Page 665 and 666:
10.4 E X - S A F E T Y S W I T C H
Page 667 and 668:
I Ex-Safety switches I Ordering det
Page 669 and 670:
Page 671 and 672:
I Ex-Safety switches I Technical da
Page 673 and 674:
Dimension drawing 225 X197 I Ex-Saf
Page 675 and 676:
Page 677 and 678:
Page 679 and 680:
Page 681 and 682:
Page 683 and 684:
Page 685 and 686:
Page 687 and 688:
I Ex-Safety switches I 3-pole Techn
Page 689 and 690:
I Ex-Safety switches I 3-pole, 20 A
Page 691 and 692:
Page 693 and 694:
Page 695 and 696:
10.34 I N D U S T R I A L S A F E T
Page 697 and 698:
I Industrial safety switches I Orde
Page 699 and 700:
Page 701 and 702:
I Industrial safety switches I Tech
Page 703 and 704:
I Industrial safety switches I 3-po
Page 705 and 706:
Page 707 and 708:
Page 709 and 710:
I Industrial safety switches I Tech
Page 711 and 712:
I Industrial safety switches I 3-po
Page 713 and 714:
I Industrial safety switches I 3-/6
Page 715 and 716:
Page 717 and 718:
Page 719 and 720:
10.58 E X - M A I N C U R R E N T S
Page 721 and 722:
I Ex-Main current switches I 3-pole
Page 723 and 724:
Page 725 and 726:
I Ex-Main current switches I GHG 26
Page 727 and 728:
I Ex-Main current switches I GHG 26
Page 729 and 730:
Page 731 and 732:
10.70 E X - P O W E R C I R C U I T
Page 733 and 734:
I Ex-Main circuit breaker I EXKO 73
Page 735 and 736:
Page 737 and 738:
Page 739 and 740:
Page 741 and 742:
Page 743 and 744:
Page 745 and 746:
10.84 E X - M A N U A L M O T O R S
Page 747 and 748:
I Ex-Manual motor starter I GHG 635
Page 749 and 750:
I Ex-Manual motor starter I GHG 635
Page 751 and 752:
I Ex-Manual motor starter I Accesso
Page 753 and 754:
EX-CONTROL AND DISTRIBUTION SYSTEMS
Page 755 and 756:
I Ex-Control and distribution syste
Page 757 and 758:
Page 759 and 760:
Technical data MCB distribution for
Page 761 and 762:
Dimension drawing lighting distribu
Page 763 and 764:
Page 765 and 766:
Technical data MCB distribution for
Page 767 and 768:
Dimension drawing lighting distribu
Page 769 and 770:
1. mounting space height 190 mm 2.
Page 771 and 772:
I Ex-d-Built-in components I Size 4
Page 773 and 774:
I Ex-d-Built-in components I Size 4
Page 775 and 776:
t (sec.) I Ex-d-Built-in components
Page 777 and 778:
Ex-Built-in components MCB 0.5 A to
Page 779 and 780:
Technical data I Ex-d-Built-in comp
Page 781 and 782:
Dimension drawing ⎮ Termination d
Page 783 and 784:
Ordering details NH 00 Main fuse up
Page 785 and 786:
Ordering details Main switch up to
Page 787 and 788:
Ex-Built-in components Air-break co
Page 789 and 790:
Technical data Motor starter for di
Page 791 and 792:
Dimension drawing ⎮ Main contacts
Page 793 and 794:
Ex-Built-in components Installation
Page 795 and 796:
Ex-Built-in components Installation
Page 797 and 798:
Dimension drawing 130 X 118 Module
Page 799 and 800:
Ordering details I Ex-d-Built-in co
Page 801 and 802:
Ex-Built-in components Manual motor
Page 803 and 804:
Technical data Thermal overcurrent
Page 805 and 806:
Technical data Overvoltage arrester
Page 807 and 808:
Technical data Star-delta timer rel
Page 809 and 810:
Dimension drawing ⎮ Termination d
Page 811 and 812:
Dimension drawing Ex-e Trafo B1 B H
Page 813 and 814:
I Ex-e-Empty enclosures in plastic
Page 815 and 816:
I Ex-e-Empty enclosures in stainles
Page 817 and 818:
Customised enclosure, covered by Ty
Page 819 and 820:
Technical data Ex-Key operated push
Page 821 and 822:
SGT 1 x 4-pole Technical data I Ex
Page 823 and 824:
Technical data Ex-Signal lamp SIL M
Page 825 and 826:
Page 827 and 828:
Size 11 Technical data Size 9 Ex d
Page 829 and 830:
Signal lamp Technical data Key oper
Page 831 and 832:
Page 833 and 834:
The distributions and built-in comp
Page 835 and 836:
Ordering details I Ex-Control and d
Page 837 and 838:
Wiring diagram ⎮ Dimension drawin
Page 839 and 840:
I Built-in components I Pushbutton
Page 841 and 842:
Ordering details I Built-in compone
Page 843 and 844:
Ordering details I Built-in compone
Page 845 and 846:
Page 847 and 848:
Page 849 and 850:
Page 851 and 852:
Dimension drawing Size 1 Size 2 Siz
Page 853 and 854:
Dimension drawing B GUB 30 A C F E
Page 855 and 856:
Technical data Mushroom-h.p.-button
Page 857 and 858:
Technical data Ex-Control and signa
Page 859 and 860:
Page 861 and 862:
I Keyword register (In alphabetical
Page 863 and 864:
I Keyword register (In alphabetical
Page 865 and 866:
I Keyword register (Chapter in alph
Page 867 and 868:
I Keyword register (Chapter in alph
Page 869 and 870:
I Index of order code I Order No. P
Page 871 and 872:
Page 873 and 874:
Page 875 and 876:
Page 877 and 878:
Page 879 and 880:
Page 881 and 882:
Page 883 and 884:
Page 885 and 886:
Page 887 and 888:
Page 889:
show all

Explosion Protected Products - Acasa | Intec Automatizari

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?