Auger Bit File Axe Sharpening File Featheredge Websaw File Screw ...

15
200
FILES
File Coarseness
Bastard Files
• Provide a coarse finish
2nd Cut Files
• Provide a medium finish
Smooth Files
• Provide a fine finish
Flat Files
Used by machinists, machinery builders, ship and engine
builders, repair men and others for rapid removal of metal.
Order No. Mfg. No. Description Length (in)
1539.00003 1-110-04-1-0 Bastard 4
1539.00006 1-110-06-1-0 Bastard 6
1539.00009 1-110-08-1-0 Bastard 8
1539.00012 1-110-10-1-0 Bastard 10
1539.00015 1-110-12-1-0 Bastard 12
1539.00018 1-110-14-1-0 Bastard 14
1539.00021 1-110-04-2-0 2nd cut 4
1539.00024 1-110-06-2-0 2nd cut 6
1539.00027 1-110-08-2-0 2nd cut 8
1539.00030 1-110-10-2-0 2nd cut 10
1539.00033 1-110-12-2-0 2nd cut 12
1539.00036 1-110-04-3-0 Smooth 4
1539.00039 1-110-06-3-0 Smooth 6
1539.00042 1-110-08-3-0 Smooth 8
1539.00045 1-110-10-3-0 Smooth 10
1539.00048 1-110-12-3-0 Smooth 12
Half Round Files
Rounded on one side
and flat on the other.
They are used on concave, convex and flat surfaces.
Order No. Mfg. No. Description Length (in)
1539.00051 1-210-04-1-0 Bastard 4
1539.00054 1-210-06-1-0 Bastard 6
1539.00057 1-210-08-1-0 Bastard 8
1539.00060 1-210-10-1-0 Bastard 10
1539.00063 1-210-12-1-0 Bastard 12
1539.00066 1-210-14-1-0 Bastard 14
1539.00069 1-210-04-2-0 2nd cut 4
1539.00072 1-210-06-2-0 2nd cut 6
1539.00075 1-210-08-2-0 2nd cut 8
1539.00078 1-210-10-2-0 2nd cut 10
1539.00081 1-210-12-2-0 2nd cut 12
1539.00084 1-210-04-3-0 Smooth 4
1539.00087 1-210-06-3-0 Smooth 6
1539.00090 1-210-08-3-0 Smooth 8
1539.00093 1-210-10-3-0 Smooth 10
1539.00096 1-210-12-3-0 Smooth 12
Long Angle
Lathe Files
Long angle lathe files are specially designed for fine finishing
and rapid stock removal on lathe work. Both edges are
"safe" or uncut. These files remove metal faster than regular
mill files and leave a smoother finish.
Order No. Mfg. No. Description Length (in)
1539.00159 1-104-10-3-0 Long Lathe 10
1539.00162 1-104-12-3-0 Long Lathe 12
1539.00165 1-104-14-3-0 Long Lathe 14
Square Files
Square files are used for filing slots, keyways and general
surface filing. Square files are double-cut on all sides and
are sometimes preferred to a flat file because they are
heavier in "section" and have four filing surfaces.
Order No. Mfg. No. D e s c r i p t i o n Length (in)
1539.00099 1-160-04-1-0 Bastard 4
1539.00100 1-160-06-1-0 Bastard 6
1539.00101 1-160-08-1-0 Bastard 8
1539.00102 1-160-10-1-0 Bastard 10
1539.00103 1-160-12-1-0 Bastard 12
1539.00104 1-160-04-2-0 2nd cut 4
1539.00105 1-160-06-2-0 2nd cut 6
1539.00106 1-160-08-2-0 2nd cut 8
1539.00107 1-160-10-2-0 2nd cut 10
1539.00108 1-160-12-2-0 2nd cut 12
1539.00109 1-160-04-3-0 Smooth 4
1539.00110 1-160-06-3-0 Smooth 6
1539.00111 1-160-08-3-0 Smooth 8
1539.00112 1-160-10-3-0 Smooth 10
1539.00114 1-160-12-3-0 Smooth 12
Round Files
Used to file circular openings or concave surfaces.
Tapered slightly towards the point.
Order No. Mfg. No. Description Length (in)
1539.00117 1-230-06-1-0 Bastard 6
1539.00120 1-230-08-1-0 Bastard 8
1539.00123 1-230-10-1-0 Bastard 10
1539.00126 1-230-12-1-0 Bastard 12
1539.00129 1-230-04-2-0 2nd cut 4
1539.00132 1-230-06-2-0 2nd cut 6
1539.00135 1-230-08-2-0 2nd cut 8
1539.00138 1-230-10-2-0 2nd cut 10
1539.00141 1-230-12-2-0 2nd cut 12
1539.00144 1-230-04-3-0 Smooth 4
1539.00147 1-230-06-3-0 Smooth 6
1539.00150 1-230-08-3-0 Smooth 8
1539.00153 1-230-10-3-0 Smooth 10
1539.00156 1-230-12-3-0 Smooth 12
Needle Files 2-Cut
Used by jewelers, die makers and fine tool makers.
Round handle.
Order No. Mfg. No. Description Length (in)
1539.00192 2-230-14-4-0 1/2 round 5-1/2
1539.00195 2-230-16-4-0 1/2 round 6-1/4
1539.00198 2-302-14-2-0 3 square 5-1/2
1539.00201 2-302-16-2-0 3 square 6-1/4
1539.00204 2-301-14-2-0 Flat 5-1/2
1539.00207 2-301-16-2-0 Flat 6-1/4
1539.00210 2-308-14-2-0 Knife 5-1/2
1539.00213 2-308-16-2-0 Knife 6-1/4
1539.00216 2-307-16-2-0 Round 6-1/4
1539.00219 2-307-14-2-0 Round 5-1/2
1539.00222 2-303-14-2-0 Square 5-1/2
1539.00225 2-303-16-2-0 Square 6-1/4