GASKET & PACKING SUPPLIES

GASKET & PACKING SUPPLIES
PUMP PACKINGS
Thermograf – CR
Braided from flexible graphite and
carbon yarns. Use in pumps, mixers,
agitators and other rotating equipment
and on high pressure valves.
Temperature limit: 600˚F dynamic
application, 900˚F static application.
1 to 14 pH range. Shaft speeds to 3,500 fpm
Order No. Size (in) Lbs./Spool Ft/Lb.
9089.00003 5/16 2 18.5
9089.00006 3/8 5 13.3
9089.00009 7/16 5 11.3
9089.00012 1/2 5 9.4
9089.00015 9/16 5 8.0
9089.00018 5/8 5 6.6
9089.00021 3/4 10 5.0
9089.00024 7/8 10 4.2
9089.00027 1 10 3.5
Thermopak 363
General service interlock braid synthetic
yarn packing, treated with
petrolatum lubricants and graphite.
For rotary and centrifugal pumps
handling hot or cold water, mild acids
and alkalies and oils. 450˚F temperature
limit. 4 to 10 pH range. Shaft speeds to 1,500 fpm.
Order No. Size (in) Lbs./Spool Ft/Lb.
9089.00030 1/8 2 95.00
9089.00033 3/16 2 70.00
9089.00036 1/4 2 37.00
9089.00039 5/16 2 22.00
9089.00042 3/8 5 15.00
9089.00045 7/16 5 10.00
9089.00048 1/2 5 9.00
9089.00051 9/16 5 7.00
9089.00054 5/8 5 5.00
9089.00057 3/4 10 4.00
9089.00060 7/8 10 3.00
9089.00063 1 10 2.00
Thermopak 172
An interlock braided PTFE packing
with an inert lubricant. Use where
other PTFE packings glaze or harden
from frictional heat. 500˚F temperature
limit. 2 to 12 pH range.
Shaft speeds to 2,000 fpm.
Order No. Size (in) Lbs./Spool Ft/Lb.
9089.00066 1/8 2 33.00
9089.00069 3/16 2 29.00
9089.00072 1/4 2 21.00
9089.00075 5/16 2 14.00
9089.00078 3/8 5 8.00
9089.00081 7/16 5 7.00
9089.00084 1/2 5 4.50
9089.00087 9/16 5 4.00
9089.00090 5/8 5 3.25
9089.00093 3/4 10 2.00
9089.00096 7/8 10 1.50
9089.00099 1 10 1.00
Thermopak 174
A graphite filled PTFE packing, with
excellent thermal conductivity and
abrasion resistance properties. Will
not hydrolyse. Best choice for universal
service. Shaft speeds to
3,600 fpm. 500˚F temperature limit.
0 to 14 pH range
Order No. Size (in) Lbs./Spool Ft/Lb.
9089.00102 1/8 2 66.00
9089.00105 3/16 2 38.00
9089.00108 1/4 2 22.00
9089.00111 5/16 2 14.00
9089.00114 3/8 5 10.50
9089.00117 7/16 5 7.00
9089.00120 1/2 5 4.50
9089.00123 9/16 5 4.00
9089.00126 5/8 5 4.00
9089.00129 3/4 10 3.00
9089.00132 7/8 10 2.00
9089.00135 1 10 1.00
Thermopak 161
An interlock braided packing made
from synthetic yarns impregnated
with PTFE and treated with a
break-in lubricant.It is a good general
service pump and valve packing.
450˚F temperature limit. Shaft
speeds to 1,500 fpm.
Order No. Size (in) Lbs./Spool Ft/Lb.
9089.00138 1/8 2 80.00
9089.00141 3/16 2 40.00
9089.00144 1/4 2 22.00
9089.00147 5/16 2 14.00
9089.00150 3/8 5 10.00
9089.00153 7/16 5 7.00
9089.00156 1/2 5 6.00
9089.00159 9/16 5 5.00
9089.00162 5/8 5 4.00
9089.00165 3/4 10 3.00
9089.00168 7/8 10 2.00
9089.00171 1 10 1.50
Valve Stem Packings
Thermopak 169
Interlock braided from pure PTFE filament
yarn lubricated with a PTFE
dispersion. Good for valve and slow
speed pump applications. 550˚F
temperature limit. 0 to 14 pH range
Order No. Size (in) Lbs./Spool Ft/Lb.
9089.00174 1/8 2 35.00
9089.00177 3/16 2 31.00
9089.00180 1/4 2 22.00
9089.00183 5/16 2 15.00
9089.00186 3/8 2 or 5 10.00
9089.00189 7/16 5 9.50
9089.00192 1/2 5 7.00
9089.00195 9/16 5 5.00
9089.00198 5/8 5 4.00
9089.00201 3/4 10 2.50
9089.00204 7/8 10 2.00
9089.00207 1 10 1.00
90
1373

GASKET & PACKING SUPPLIES
90
1374
5100 – Compre s s e d
– Non-Asbestos
A high performance synthetic
sheet with nitrile binder.
Excellent chemical resistance to
most petroleum products, solvents and mild chemicals. Low
creep relaxation at high temperatures. Blue colour.
• 800˚F temperature limit
Order No. Sheet Thickness (in) Sheet Size(in)
9089.00210 1/64 60 x 60
9089.00213 1/32 60 x 60
9089.00216 3/64 60 x 60
9089.00219 1/16 60 x 60
9089.00222 1/8 60 x 60
Klinger Oilit ® 3XA – Asbestos
Top quality oil and gasoline-resistant sheet. Asbestos fibre
with NBR binder. Widely used in the oil and petro-chemical
industries. Excellent resistance to oils and solvents, particularly
suitable for use with refrigerants.
• Anti-stick: Eliminates the need for graphite or grease.
• Anti-corrosion: Surface asbestos fibres that cause corrosion
have been removed
• Anti-leak: Conforms to all the irregularities of flange surfaces
to provide increased micro-sealing
• Suggested maximum temperature: 1,000°F
Order No. Sheet Thickness (in) Sheet Size(in)
9089.00225 1/64 60 x 80
9089.00228 1/32 60 x 80
9089.00231 1/6 60 x 80
9089.00234 3/32 60 x 80
9089.00237 1/8 60 x 80
Flexible Graphite
Sheeting
High resistance to extreme temperatures,
steam and chemicals.
Low gas permeability and thermal
expansion along with great
compression and creep relaxation qualities. Available in
sheet form as well as die-cut gaskets, braided packing
(Thermograf ® ) and die-formed rings or tapes (Allgraph ® ).
• Temperature Limits: -328˚F to 932˚F; steam: 1,200˚F
• Pressure Limit: 5,000 PSI
• Nuclear Certifiable pH Range: 0-14 (except strong oxidizers)
Homogenous
Laminated
Order No. Size (in) Order No. Size (in) Thick (in)
9089.00240 24 x 24 9089.00267 40 x 40 1/32
9089.00243 40 x 40 9089.00270 40 x 60 1/32
9089.00246 60 x 60 9089.00273 60 x 60 1/32
9089.00249 24 x 24 9089.00276 40 x 40 1/16
9089.00252 40 x 40 9089.00279 40 x 60 1/16
9089.00255 60 x 60 9089.00282 60 x 60 1/16
9089.00258 24 x 24 9089.00285 40 x 40 1/8
9089.00261 40 x 40 9089.00288 40 x 60 1/8
9089.00264 60 x 60 9089.00291 60 x 60 1/8
300 Red Rubber
Gasketing
Made from an SBR compound
resulting in a sheet soft enough to
make a tight fluid seal, strong
enough to resist a blow-out.
Suitable for use against hot or
cold water, air and low pressure
steam. Available in both wrapper
or smooth finish. Exceeds ASTM D 1330-78 Grade II.
• 225˚F temperature limit
Order No. Sheet Thickness (in) Standard Width (in)
9089.00294 1/32 36
9089.00297 1/16 36
9089.00300 1/16 48
9089.00303 3/32 36
9089.00306 3/32 48
9089.00309 1/8 36
9089.00312 1/8 48
9089.00315 3/16 36
9089.00318 3/16 48
9089.00321 1/4 36
9089.00324 1/4 48
882 Commercial
Neoprene Gasketing
Good quality, low cost sheet that
offers moderate resistance to
oils, sunlight, mild mineral acids,
alkalis, alcohols and solvents.
• 250˚F temperature limit
• Plate surface finish
• 700 psi tensile strength
Order No. Thickness (in) Width (in)
9089.00327 1/16 48
9089.00330 1/8 48
9089.00333 3/16 48
9089.00336 1/4 48
Synthetic Rubber
Gasketing
925 EPDM
A cost-effective and versatile
material. Performs well
with most acids, alkalis,
ozone, water and stays flexible
at low temperatures. General purpose gasketing material
for the pulp and paper industry. Albion 925-P is available
for higher temperature applications (330˚F). Not suitable
for use with petroleum products. Black colour.
• 275˚F temperature limit
• 900 psi tensile strength ASTM D412
Order No. Thickness (in) Width (in)
9089.00339 1/16 36
9089.00342 1/16 48
9089.00345 1/8 36
9089.00348 1/8 48
9089.00351 3/16 36
9089.00354 3/16 48
9089.00357 1/4 36
9089.00360 1/4 48

GASKET & PACKING SUPPLIES
960 Red Silicone
Gasketing
Superior mechanical, thermal,
electrical and chemical properties.
Substantially more resistant to oils, glycol, acids
than most elastomers. Odourless as well as tasteless, nontoxic
and non-corrosive. Recommended for food and pharmaceutical
applications.
• 500˚F temperature limit
• 900 psi tensile strength ASTM D412
Order No. Thickness (in) Width (in)
9089.00363 1/32 36
9089.00366 1/16 36
9089.00369 3/32 36
9089.00372 1/8 36
9089.00375 3/16 36
9089.00378 1/4 36
9089.00381 3/8 36
9089.00384 1/2 36
980 Viton ® Gasketing
Retains its mechanical properties even at high temperatures
in most industrial process fluids. Excellent or use with
petroleum products, acids, alkalis, fluorine, chlorine, sulphuric
acid and other aggressive chemicals. Does not
become brittle after prolonged exposure. Black colour.
• 450˚F temperature limit
• 1,000 psi tensile strength ASTM D412
Order No. Thickness (in) Width (in)
9089.00387 1/32 36
9089.00390 1/32 48
9089.00393 1/16 36
9089.00396 1/16 48
9089.00399 1/8 36
9089.00402 1/8 48
9089.00405 3/16 36
9089.00408 3/16 48
9089.00411 1/4 36
9089.00414 1/4 48
Pure Expanded
PTFE Joint Sealant
Thick tape form with an adhesive
back. Compresses into a
thin, wide ribbonwhich c o n-
forms to surface irregularities. Ideal for maintenance, emerg
e n c yrepairs, or special design flanges.
Regular Spool
Jumbo Spool
Width (in) Order No. Length (ft) Order No. Length (ft)
1/8 9089.00417 100 9089.00441 1000
3/16 9089.00420 75 9089.00444 750
1/4 9089.00423 50 9089.00447 500
3/8 9089.00426 25 9089.00450 250
1/2 9089.00429 15 9089.00453 150
5/8 9089.00432 15 9089.00456 150
3/4 9089.00435 15 9089.00459 100
1 9089.00438 15 9089.00462 75
2 — — 9089.00465 39
THERMOFAB Cloths
Available in various styles,
including texturized, high-temperature
treated, and tacky
gasket cloth. Typical applications
include curtains, drop
cloths, fire blankets, stressrelieving,
insulation, lagging,
dust filtration, scrubbers, cable-tray covers,safety apparel.
Thick. Weight Width Temp.
Order No. Mfg. No. (in) (oz yd 2 ) (in) Material (˚F)
9089.00468 2175 .032 17.5 40 Glass 1000
9089.00471 2175 .032 17.5 60 Glass 1000
9089.00474 2240 .060 24 40 Glass 1000
9089.00477 2240 .060 24 60 Glass 1000
9089.00480 2360 .075 36 40 Glass 1000
9089.00483 2360 .075 36 60 Glass 1000
9089.00486 GVC3500 .060 35 40 Treated glass 1500
9089.00489 GVC3500 .060 35 60 Treated glass 1500
9089.00492 GVC3500 .060 35 72 Treated glass 1500
9089.00495 110 .110 32 36 Ceramic wire insert 1800
9089.00498 84CH .026 18 36 Silica 3000
9089.00501 188CH .054 32 36 Silica 3000
THERMOFAB Woven Tapes
Developed as an efficient, high quality alternative to
asbestos in hot-wrapping and energy-conservation applications.
Woven with selvaged edges to prevent unraveling.
Typical applications include pipe and hose wrapping and
hangers, thermal insulation, electrical applications, fabrication
of special gaskets and furnace door seals.
* Must Advise Width of material when ordering
Mfg. Thick. Width Length Temp.
Order No. No. (in) (in) (ft) Material (˚F)
9089.00504 150 1/16 1/2 – 6 100 Glass 1000
9089.00507 300 1/8 1/2 – 6 100 Glass 1000
THERMOFAB Rope
Specifically developed as an
alternative to asbestos in packing
and sealing applications
such as oven and furnace door
seals, wood-stove door seals, caulking and thermal insulation.
Also suitable for seals in metal-casting molds.
* Must Advise Diameter of material when ordering
Mfg. * Dia. Temp.
Order No. No. Construction (in) Material (˚F)
9089.00510 267 Braided, firm 3/16 – 1-1/2 Glass 1000
9089.00513 273 Braided 1/4 – 3 Glass 1000
9089.00516 274 Twisted 1/4 – 2 Ceramic 2300
9089.00519 275 Braided 1/4 – 2 Ceramic 2300
THERMOFAB
Sleeving
For extreme-heat protection
of tubing, hoses, cables,
wires, and thermocouple leads. Other applications include
stress relieving, insulation and oven-door seals.
* Must Advise Inside Diameter size when ordering
I.D. Thickness Temp.
Order No. Mfg. No. (in) (in) Material (˚F)
9089.00522 1000 1/4 to 4 .060 Glass 1000
90
1375

GASKET & PACKING SUPPLIES
Sheet Rubber
• Materials available: SBR, Neoprene, Nitrile, EPDM,
Hypalon, Chute & Launder Lining, Viton, Silicone,
Neoprene, Pure Gum, C.I. Packing, Red Sheet Packing,
Butyl, Closed Cell Sponge, Urethane Sheet, Durashield
• Cut to size: specify Width and Length
Max. Max.
Order No. Mfg. No. Gauge (in) Width (in) Length (ft)
PURE GUM RUBBER - AMBER
DUROMETER SHORE A: 40
9089.00591 PGI-.063 1/16 48 66
9089.00594 PGI-.125 1/8 48 66
9089.00597 PGI-.188 3/16 48 66
9089.00600 PGI-.25 1/4 48 66
9089.00603 PGI-.375 3/8 48 66
9089.00606 PGI-.5 1/2 48 66
9089.00609 PGI-.75 3/4 48 66
9089.00612 PGI-1 1 48 66
EPDMI RUBBER - BLACK
DUROMETER SHORE A: 60
9089.00615 EPDI-.125 1/8 48 66
9089.00618 EPDI-.188 3/16 48 66
9089.00621 EPDI-.25 1/4 48 66
9089.00624 EPDI-.375 3/8 48 33
9089.00627 EPDI-.5 1/2 48 33
NEOPRENE SHEETING - BLACK
DUROMETER SHORE A: 60
9089.00630 NEOI60-.031 1/32 48 66
9089.00633 NEOI60-.063 1/16 48 66
9089.00636 NEOI60-.094 3/32 48 66
9089.00639 NEOI60-.125 1/8 48 66
9089.00642 NEOI60-.188 3/16 48 66
9089.00645 NEOI60-.25 1/4 48 66
9089.00648 NEOI60-.375 3/8 48 33
9089.00651 NEOI60-.5 1/2 36 33
9089.00654 NEOI60-.625 5/8 48 33
9089.00657 NEOI60-.75 3/4 48 33
9089.00660 NEOI60-1 1 48 33
9089.00663 NEOI60-1.25 1-1/4 48 9
9089.00666 NEOI60-1.5 1-1/2 48 9
9089.00669 NEOI60-2 2 48 9
NITRILE SHEETING - BLACK
DUROMETER SHORE A: 60
9089.00702 NITI60-.063-48 1/16 48 66
9089.00705 NITI60-.125-48 1/8 48 66
9089.00708 NITI60-.188-48 3/16 48 66
9089.00711 NITI60-.25-48 1/4 48 66
9089.00714 NITI60-.375-48 3/8 48 33
9089.00717 NITI60-.5-48 1/2 48 33
Max. Max.
Order No. Mfg. No. Gauge (in) Width (in) Length (ft)
NITRILE SHEETING - WHITE
DUROMETER SHORE A: 60
9089.00720 WNITI-.063 1/16 48 66
9089.00723 WNITI-.125 1/8 48 66
9089.00726 WNITI-.188 3/16 48 66
9089.00729 WNITI-.25 1/4 48 66
SBR 60 RUBBER - BLACK
DUROMETER SHORE A: 60
9089.00756 SBRI60-.063 1/16 48 66
9089.00759 SBRI60-.094 3/32 48 66
9089.00762 SBRI60-.125 1/8 48 66
9089.00765 SBRI60-.188 3/16 48 66
9089.00768 SBRI60-.25 1/4 48 50
9089.00771 SBRI60-.375 3/8 48 50
9089.00774 SBRI60-.5 1/2 48 50
9089.00777 SBRI60-.625 5/8 48 50
9089.00780 SBRI60-.75 3/4 48 50
9089.00783 SBRI60-1 1 48 50
9089.00786 SBRI60-1.25 1-1/4 48 9
9089.00789 SBRI60-1.5 1-1/2 48 9
9089.00792 SBRI60-2 2 48 9
RED SHEET PACKING SMOOTH FINISH
DUROMETER SHORE A: 80
9089.00795 RSPSI-.063 1/16 48 66
9089.00798 RSPSI-.125 1/8 48 66
9089.00801 RSPSI-.188 3/16 48 66
9089.00804 RSPSI-.25 1/4 48 33
Vibrapads
Anti-vibration Neoprene Pads
Molded from neoprene and available
as standard, in both 18" and 6"
square sizes in load ranges from 25 to 300 psi. Easily cut
to size to suit the application and can be stacked without
impairing the performance. 18" pads are molded separately
with solid framing around the outside.
90
1376
Order No. Mfg. No. Load Range (psi) Size (in)
9089.03101 VP25 1-25 18 x 18 x 5/16
9089.03103 VP50 10-50 18 x 18 x 5/16
9089.03105 VP100 40-700 18 x 18 x 5/16
9089.03107 VP200 75-200 18 x 18 x 1/2
9089.03109 VP300 150-300 18 x 18 x 1/2
9089.03111 VP-25-6 1-25 6 x 6 x 5/16
9089.03113 VP-50-6 10-50 6 x 6 x 5/16
9089.03115 VP-100-6 40-100 6 x 6 x 5/16
9089.03117 VP-200-6 75-200 6 x 6 x 1/2
9089.03119 VP-300-6 150-300 6 x 6 x 1/2

GASKET & PACKING SUPPLIES
Fiberfrax Ceramic
Insulation Blanket
This insulation is a strong, lightweight, flexible needled
blanket that is made from spun ceramic fibres. Available in
a wide variety of thicknesses, widths and densities.
Ideal for use in furnace, kiln, reformer and boiler seals, linings
and insulation, casting mold wrappings, removeable
insulating blankets for field stress relieving welds, reuseable
insulation for steam and gas turbines, flexible high
temperature pipe insulation, fire protection.
Continuous Melting
Use Limit* Point Density
Order No. Colour (˚F) (˚F) (lb/ft 3 )
9089.00525 White 2300 3200 4
9089.00528 White 2300 3200 6
9089.00531 White 2300 3200 8
Allpax Gasket Cutter
Cuts all gasketing materials
including compressed asbestos,
cork, rubber, PTFE and nonasbestos
fibre. Cutting capacity
is from 1/4" to 60" in diameter
and up to 3/4" thick. Efficient
and easy-to-use tool that eliminates
waste and costly errors.
Available in five convenient kits
to meet a broad range of cutting
requirements.
Order No. Mfg. No. Description Cap. (in)
9089.00534 1 Gasket Cutter 12
9089.00537 2 Gasket Cutter 24
9089.00540 3 Gasket Cutter 36
9089.00543 4 Gasket Cutter 48
9089.00546 5 Gasket Cutter 60
Mats & Ramps
• Interlocking with drain holes for
self-cleaning; unique under-sided
pattern for greater traction
• 1” thick, black (made from
recycled rubber tires)
• Grease and oil resistant
• Non-skid; hard wearing
• Ideal for assembly & product
lines, food preparation,
industrial wash areas, etc.
Order No. Mfg. No. Size (in)
9089.00549 M100 15-1/4 x 15-1/4
9089.00552 MM200 15-1/4 x 5-3/4
9089.00555 MF300 15-1/4 x 5-3/4
9089.00558 M400 5-3/4 x 5-3/4 x 8
9089.00561 MMOD 27” x 42” Mat Complete; Includes:
2-M100, 3-MM200, 3-MF300, 4-M400
Rubber Floor Matting - Black Wide Rib
• Advise Length required.
Order No. Mfg. No. Thick (in) Width (in) Max. Length
9089.00564 RMB-.125 1/8 36 25 yds
Anti-Fatigue Matting - Black Wide Rib
1/8 Vinyl Face with Sponge Back
• Advise Length required.
Order No. Mfg. No. Thick (in) Width (in) Max. Length
9089.00567 FM-.25 1/4 36 10 yds
9089.00570 FM-.375 3/8 36 10 yds
Hex Matting
• Individual matting pieces can be
connected together
• Safety yellow beveled edge
reduces trip hazard
Order No. Mfg. No. Description Thick (in)
9089.00573 STAM 36" x 36" mat 5/8
9089.00576 STAM-CON Connector
9089.00579 STAM-EDGE Beveled edge
7" Heavy Duty
Wheel Chocks
Designed to prevent ‘creeping’ of the
truck or trailer while loading and
unloading. Conveniently stores in
truck cab or chains to loading dock.
With Nylon Carrying Handle
For easier carrying.
Order No. Mfg. No. Description
9089.00582 202807 7" Wheel Chock
9089.00585 202807H 7" Wheel Chock with Nylon strap handle
6" Length
Truck Bumpers
Made from heavy wall
rubber to provide a
resilient, durable bumper.
Sold in pairs, includes all
mounting hardware.
Order No. Mfg. No. Description
9089.00588 202206 6" Truck Bumpers w/ hardware, pairs
90
1377