TI - Creation Willi Geller

C R E A T I O N W I L L I G E L L E R I N T E R N A T I O N A L – S I M P L Y B R I L L I A N T
TI

A new titanium from Creation!
MDT Oliver Heinzle
C R E AT I O N T I –
tough and brilliant colour
Creation TI is a new porcelain for veneering of titanium frameworks.
It impresses with high strength at low density and with
excellent colour, dimensional and firing stability - even after multiple
firings.
The physical properties of Creation TI are specially matched to
the framework material titanium and suited to its coefficient of
thermal expansion. With a maximum of 810 degrees Celsius, the
firing temperatures harmonise perfectly with the titanium-specific
properties.
With a flexural strength of approx. 80 MPa Creation TI is
extremely stable - for long and secure wearing comfort. And thanks
to the all-purpose bonder Crea TI Bond bonding strengths are
reached which are more than 30 per cent above the recommended
ISO limit - as a result porcelain flaws are virtually ruled out.
The aesthetics are just right too: Creation TI in the fired state has
a non-porous microstructure and hence a brilliant colour effect.
Creation TI - tailor-made to meet the highest demands
T H E B R I L L I A N C E O F C R E AT I O N T I :
• safety due to high flexural strength (80 Mpa)
• increased bond strength to the framework owing to
Crea TI Bond
• brilliant colour effect due to non-porous microstructure
• economical and easy handling because colour build-up is
the same as for all Creation systems
• high firing stability even after multiple firings
White is the fashion
C R E AT I O N T I B L E A C H S H A D E S K I T –
for pearly-white aesthetics
The special Bleach Shades Kit complements the aesthetically
versatile range of Creation TI with high-quality shades beyond the
conventional colour palette - and for all indications!
To embrace the current trend towards very light tooth shades,
the Creation TI system has been expanded with its own bleach
shades. For instance, they allow technicians to fabricate accurately
detailed highlights, perfect shade adaptations of exceptional
titanium-ceramic work which is outside the usual shade
guide.
The ten-part Creation TI Bleach Shades Kit contains a base
porcelain perfectly matched to the titanium framework, three
dentines, one incisal and one shoulder porcelain and the corresponding
fluids. They are, of course, compatible with all the ceramics
contained in the Creation TI system - for individual solutions
with impressive colour brilliance.
Creation TI Bleach Shades Kit: uncompromisingly white
T H E B R I L L I A N C E O F T H E C R E AT I O N T I
B L E A C H S H A D E S K I T:
• highest aesthetics thanks to true-to-nature light dynamics
• high colour accuracy and colour fidelity thanks to
high-quality materials
• ease of handling thanks to integrated shade and
build- up system
• compatible with all Creation TI materials

Naturally simple - naturally individual
CREATION AV.ZI.TI. MAKE UP INSTANT –
always strike the right note
Individual colour nuances can easily and quickly be created
with the complementary porcelain stains in the Creation AV.ZI.TI.
Make Up Instant kit.
A perfect mix: The high-quality porcelain stains are fine-grained,
fluorescent and can be readily mixed together. They
effectively and harmoniously convey reproduction of the natural
tooth shade. Even during application or mixing, the brilliant
colour effect is discreetly visible.
Application of the special overglaze gives the final restoration
an added soft silky sheen. What is more, it is simple and efficient
to use: Mix a small amount of the overglaze to a thin liquid
consistency and apply to the object in a very thin layer. Colour
corrections can still be made later to the overglaze.
Creation AV ZI.TI. Make Up Instant - limitless colour characterisation
T H E B R I L L I A N C E O F C R E AT I O N
AV. Z I . T I . M A K E U P I N S TA N T:
• compatible with all Creation TI materials, but also with
Creation AV and ZI
• high colour accuracy and colour fidelity thanks to high-
quality materials
• almost matches the light dynamics of natural teeth
• ease of handling without complicated mixing
Accurate measuring, perfect fixation
L I Q U I D F I R I N G PA D –
dimensionally stable and secure
The new liquid firing pad for all Creation systems precisely fixes
the object on the fireproof tray. This is because the unique liquid
support material hardens completely during the firing process.
It is easy to use, the result is simply impressive: The novel firing
pad is applied straight from the syringe into the crown or applied
onto the pressed ceramic object, then carefully placed on
the pin of the firing tray.
In the ceramic furnace, the special material completely hardens
and thereby stabilises the dental technician‘s work during
the firing process - a secure stand including for inlays, onlays,
crowns and veneers.
Tough yet easy to remove: After firing, the hardened paste can
be quickly and completely removed under running water by using
an instrument.
Liquid firing pad - stable hold from a syringe
T H E B R I L L I A N C E O F T H E
L I Q U I D F I R I N G PA D :
• stable hold on the firing tray
• easy to handle because of proven dispenser design
• safe because of firing stability and optimum heat/
warmth build-up onto the object
• economical because of precise measuring
• can be used for all Creation systems

TI Bleach Shades Kit
802050
Complete bleach shades
TI Kit 1 - 803010
Basic porcelains kit
(Dentine, Incisal)
TI Kit 2
803015
Effect porcelains kit
TI Primus
803025
Test kit for a selectable tooth shade
TI Starter Kit 803020
Introductory kit with most
important tooth shades
AV.ZI.TI. Make Up Instant
Kit 500180
Glazing and fluorescent stains
K I T S C R E AT I O N T I
Creation TI – Physical Properties
Property Measure Value Norm
Dentine Firing °C 780 -
Flexural Strength MPa (Nmm2 ) 80 Min. 50
Thermal Coefficient 10-6xK-1 8,6 ± 0,3 -
Glass Transition Temperature °C 575 ± 10 -
Y O U R L O C A L D E A L E R
Kit In Nova Neo 001150
All-purpose modifier
Kit Make Up Neo 001100
Glazing and marking stains
Kit CreaColor 001200
2 in 1 for everything: more brilliance
with individual colour effects
Distributor
Creation Willi Geller International GmbH
Koblacherstraße 3, 6812 Meiningen, Austria
Tel. +43 (0)5522 76784, Fax. +43 (0)5522 73699
info@creation-willigeller.com, www.creation-willigeller.com
Manufacturer
KLEMA Dentalprodukte GmbH
Koblacherstr. 3a, 6812 Meiningen, Austria
0483
910641 03/09
© Creation Willi Geller International GmbH
Errors and printing errors exepted. Subject to changes at any time.