Linear Ball Bearings - René Baer AG

a METRISCH
W.M. Berg
Fertigung von
Präzisionsteilen
B
CRANK STYLE
Crossed Roller Slides
Lead Screw Driven
A
.25 F
T
D
C
SHAFT STYLE
Materials:
Rails and Rollers - Hardened and Ground Tool Steel.
Top Carriage - 6061 T6 Aluminum, Clear Anodized
or G2 Close Grain Cast Iron.
Retainers - Brass
Note: Specify desired mounting holes & locations when ordering
Add C to end of stock number for Crank Style.
Add K to end of stock number for Knob Style.
Add SM to end of stock number for Shaft Style.
i.e.: LDA-10C = Aluminum series with crank.
R
KNOB STYLE
ALUMINUM CAST C P RATED
STOCK STOCK TRAVEL A B CRANK KNOB SHAFT D F +0.005 R T CAPACITY
NUMBER NUMBER STYLE STYLE STYLE +0.018 (kg)
LDA-01 LDS-01 25 155 140 133 50.8 76.2 105
LDA-02 LDS-02 25 25.0 50.8 180 165 159 76.2 101.6 4.00 35 25 160
LDA-03 LDS-03 50 206 190 164 101.6 152.4 210
LDA-04 LDS-04 25 184 175 165 76.2 101.6 160
LDA-05 LDS-05 25 31.7 76.2 210 200 190 101.6 127.0 4.00 38 25 235
LDA-06 LDS-06 50 235 225 216 101.6 152.4 210
LDA-07 LDS-07 25 235 225 216 127.0 152.4 290
LDA-08 LDS-08 60 285 276 266 152.4 203.2 340
LDA-09 LDS-09 50 36.5 101.6 337 327 316 203.2 254.0 4.00 36 25 475
LDA-10 LDS-10 75 387 378 368 228.6 304.8 500
LDA-11 LDS-11 50 313 269 279 152.4 203.2 545
LDA-12 LDS-12 100 50.8 152.4 414 390 361 203.2 304.8 6.00 54 38 650
LDA-13 LDS-13 150 515 492 483 304.8 406.4 780
René Baer AG
CH-8833 Samstagern
Fax +41 44 787 05 56
E-Mail wmberg@renebaerag.ch 12/38
P
N