Metrisch - René Baer AG
Metrisch - René Baer AG
Metrisch - René Baer AG
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
a METRISCH<br />
W.M. Berg<br />
Fertigung von<br />
Präzisionsteilen<br />
A<br />
ØD<br />
Quick-2-Lock ® Hubs<br />
Tool Steel For 5mm to 16mm Shafts<br />
Ød<br />
• Quick and easy installation - Just tighten the nut<br />
• Positive release for removal or adjustment<br />
• Eliminates expensive machining operations -<br />
Such as cutting of keyways, turning of snap ring<br />
grooves, splines, shoulders and threads for lock<br />
nuts, drilling and pinning<br />
• Drastically relaxes shaft and hub tolerances,<br />
permitting the use of commercially finished<br />
shafting<br />
B<br />
L1<br />
L2<br />
Permissible Tolerance on Shaft Bore:<br />
For 5mm thru 16mm 0.04<br />
For 17mm thru 19mm 0.08<br />
• Smaller diameter shafts (and bearings) may be<br />
used, offering equal strength and stiffness<br />
because of the rigidizing effect of Quick-2-Lock<br />
and because of the elimination of keyways<br />
• Infinite lateral and circumferential positioning<br />
• Quick and easy removal<br />
• Excellent concentricity<br />
• Greater shaft strength and stiffness<br />
• Unaffected by vibration and torque reversals<br />
Metric Tool Steel<br />
The "torque on nut” column represents values which are necessary to obtain the<br />
maximum transmissible torque/thrust.<br />
DIMENSIONS (mm) PERFORMANCE Torque<br />
STOCK MAX. Contact On Approx.<br />
NUMBER Transmissible Pressure Nut* WT.<br />
Ød ØD Ll L2 A B Torque Thrust On Hub On Shaft<br />
N.m KN N.cm2 N.cm2 N-m<br />
QHM-5T 5 16.0 19.0 9.5 13 3 12 3.2 3565 4698 14.1 14<br />
QHM-6T 6 16.0 19.0 9.5 13 3 16 3.4 3565 3915 14.1 14<br />
QHM-8T 8 19.0 22.0 11.0 16 3 23 4.0 2547 2517 17.0 28<br />
QHM-9T 9 19.0 22.0 11.0 16 3 28 4.1 2547 2237 17.0 28<br />
QHM-10T 10 22.5 25.5 12.5 19 5 30 4.2 1857 2056 19.8 42<br />
QHM-12T 12 22.5 25.5 12.5 19 5 38 4.3 1857 1713 19.8 42<br />
QHM-14T 14 25.5 28.5 16.0 22 5 44 4.4 1238 1240 22.6 56<br />
QHM-16T 16 25.5 28.5 16.0 22 5 50.0 4.5 1238 1087 22.6 56<br />
*The "Torque on Nut" column represents values which are necessary to obtain<br />
the maximum transmissible torque/thrust.<br />
<strong>René</strong> <strong>Baer</strong> <strong>AG</strong><br />
CH-8833 Samstagern<br />
Fax +41 44 787 05 56<br />
E-Mail wmberg@renebaerag.ch 2/41