CVB-EX - Gimota

VD 09/2006
o Working Temperature: -40ºC / +135ºC
General Characteristics
o Protection degree IP66/IP67 according to EN
60529
o Working Temperature: -40ºC / +135ºC
o Hard anodized aluminium alloy or nickel plated
brass
o Protection degree IP66/IP67 according to o EN60529 Hundreds of available arrangements according to
o Hard anodized aluminium alloy or nickel plated Mil-C-5015 brass
o from size 16s to size 40
o Hundreds of available arrangements according o 2 to 150 to Mil-C-5015
contacts
o from size 16s to size 40
o Crimp or solder contacts
o 2 to 150 contacts
o Safety lock by threaded stainless steel hexagon
o Crimp or solder contacts
socket screw
o Safety lock by threaded stainless steel hexagon socket screw
Reverse bayonet coupling system
The reverse bayonet connectors are derived from the threaded Mil-C-5015 series
to provide faster coupling and anti-vibration resistance.
In this series the coupling system is composed of 3 bayonet ramps (see drawing
below) machined on the external side of the receptacle connector and 3 stainless
Reverse steel bayonet studs coupling mounted system inside the plug connector’s coupling nut.
The reverse bayonet connectors are derived from the threaded Mil-C-5015 series to provide faster coupling and
anti-vibration resistance.
In this series the coupling system is composed of 3 bayonet ramps (see drawing below) machined on the external
side of the receptacle connector and 3 stainless steel studs mounted inside the plug connector’s coupling nut.
Characteristic
Characteristics
Advantages against the thread coupling
To mate connectors rotate coupling-nut 120° only Fast coupling and uncoupling
Audible, visible and tactile mating. Security of coupling is guaranteed and consequently
To mate connectors rotate coupling-nut 120° improved only audible, reliability visible and tactile ma-
The bayonet ting. ramps The bayonet are resistant ramps to damage are resistant to damage Higher number of mating cycles
Van-System s.r.l.
Via zambeletti, 19
20021 Baranzate (Mi)
ITALIA
Advantages against the thread coupling
T : +39 02 356 993 1
F : +39 02 38 204 205
E : info@vansystem.eu
W: www.vansystem.eu
General Characteristics
Dynamin s.r.l.
Piazza Venini, 8
20010 Vittuone (Mi)
ITALIA
o Fast coupling and uncoupling
o Security of coupling is guaranteed and consequently improved reliability
o Higher number of mating cycles
T : +39 02 901 11 052
F : +39 02 902 14 99
E : info@dynamin-srl.it
W: www.dynamin-srl.it
5