Tiger River® Spas - Olympic Hot Tub Company
Tiger River® Spas - Olympic Hot Tub Company
Tiger River® Spas - Olympic Hot Tub Company
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CONTROL PANEL MENU DISPLAY<br />
The control panel consists of four main menus. These menus are; Set Temperature, System, Lite+ and Tools. The Lite+ menu will only appear if<br />
the spa is equipped with an optional multicolor light (if equipped with the optional multicolor light, use the reference card provided with the light for<br />
operating instructions).<br />
Press the MODE ▲ or MODE ▼ button to scroll through the main menus. Once the desired menu is illustrated, press the ON ▲ button to activate<br />
the menu.<br />
TEMPERATURE CONTROL<br />
Set Temperature Display<br />
The set temperature range is from 80°F to 104°F (27°C to 40°C). Higher temperatures can be reached by using<br />
one of four codes: ut-1, ut-2, ut-3 and ut-4. These settings get progressively warmer, with ut-4 the highest at<br />
approximately 106°F (41°C). (The temperature of any setting may rise slightly depending on the current use and<br />
condition of your spa, and on outside temperature.)<br />
The set temperature of the spa water will automatically be 102°F (39°C) the first time power is applied. This is the<br />
setting programmed at the factory. After the spa has been set up and used, the last temperature value set by the<br />
user will be stored in memory. If power is disconnected from the spa, it will automatically revert to the last set temperature when power is<br />
reapplied.<br />
To display the set temperature of the spa, press the ON ▲ button. The set temperature will be displayed, unless the spa is locked (in which case<br />
the lock icon is displayed). The set temperature display will automatically shut off after 30 seconds.<br />
To increase the set temperature of the spa water, press ON ▲ button. Each time the button is pressed, the set temperature display will increment<br />
by one degree. If the button is held down, the set temperature display will increase by one degree every half-second.<br />
To decrease the set temperature of the spa water, press the OFF ▼ button . Each time the button is pressed, the set temperature display will<br />
decrement by one degree. If the button is held down, the set temperature display will decrease by one degree every half-second.<br />
If the set temperature value will not change, check the TEMPERATURE LOCK and SPA LOCK features. When either of these features is applied,<br />
the temperature control is disabled. To activate the temperature control buttons, remove all locking features applied.<br />
SYSTEM MODE<br />
System Display Active<br />
Your <strong>Tiger</strong> River spa is equipped with a System Mode. This function will allow you to conveniently turn the jet(s)<br />
on high speed and the light on maximum intensity at the same time.<br />
To activate the system mode, perform the following functions:<br />
Press the MODE ▲ button until the SYSTM symbol is illuminated on the display. The jets and light icons will flash<br />
until the system mode is activated. Press the ON ▲ button to activate the SYSTM mode feature.<br />
NOTE: Once activated, the jet and light functions can still be changed by pressing the JETS or LIGHT button.<br />
To deactivate the system mode, press the MODE ▲ button until the SYSTM symbol is illuminated on the display. Press the OFF ▼ button to<br />
deactivate.<br />
TOOLS MENU<br />
Tools Display<br />
The TOOLS menu is one of the main menus on the control panel. Within the TOOLS menu are six submenus, which<br />
consists of; Clean, Temp Lock, Spa Lock, Summer Timer and Exit.<br />
To enter into the TOOLS menu, scroll through the main menus using the MODE ▲ or MODE ▼ button until the<br />
TOOLS menu is illustrated. Press the ON ▲ button to enter into the TOOLS submenu, use the MODE ▲ or<br />
MODE ▼ button to scroll through the submenus. Once the desired submenu is illustrated, press the ON ▲ button<br />
to activate the submenu or press the OFF ▼ button to deactivate the submenu. To leave the TOOLS submenu, scroll through the submenu until<br />
EXIT is illustrated, press the ON ▲ button to exit the submenu.<br />
CLEANING MODE<br />
Clean Cycle Active<br />
All <strong>Tiger</strong> River spas are equipped with a “Cleaning” mode. When the mode is activated, the jet pump in the first jet<br />
system will turn on and run for ten minutes (used for water maintenance). To activate the “Cleaning" mode, press<br />
the MODE ▲ or MODE ▼ button until the TOOLS menu is illustrated. Then press the ON ▲ button to enter the<br />
TOOLS submenus. The CLEAN symbol will illuminated (the CLEAN mode is the first submenu) on the display.<br />
Press the ON ▲ button to activate the CLEAN mode feature.<br />
NOTE: The jet icon will remain solid in the CLEAN display and will flash on and off in the main display while the “Cleaning ” mode is active.<br />
To stop the Cleaning Cycle before the ten minutes is complete, Press the MODE ▲ button until the TOOLS menu is illuminated then press the ON<br />
button to enter the TOOLS submenus where the CLEAN symbol is illuminated on the display. Press the OFF ▼ button to deactivate.<br />
NOTE: Pressing the JETS button will also deactivate the clean cycle.<br />
Control Panel Operations<br />
Page 26
Change language