Metaflex FCR Primer - AkzoNobel Aerospace Coatings
Metaflex FCR Primer - AkzoNobel Aerospace Coatings
Metaflex FCR Primer - AkzoNobel Aerospace Coatings
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>AkzoNobel</strong><br />
<strong>Aerospace</strong> <strong>Coatings</strong><br />
Product Group<br />
Characteristics<br />
Product<br />
Information<br />
Components<br />
Hardener<br />
Thinner or<br />
Activator<br />
Specifications<br />
Qualified<br />
Product List<br />
Surface Conditions<br />
Cleaning<br />
Instruction for Use<br />
Mixing Ratio<br />
(volume)<br />
<strong>Metaflex</strong> ® <strong>FCR</strong> <strong>Primer</strong><br />
<strong>AkzoNobel</strong> <strong>Aerospace</strong> <strong>Coatings</strong><br />
1 East Water Street, Waukegan, IL 60085, USA - Phone (847) 623 4200, Fax (847) 625 3200<br />
Rijksstraatweg 31, 2171 AJ Sassenheim, The Netherlands - Phone (31) 71 308 2905, Fax (31) 71 308 2056<br />
Internet: www.akzonobel.com/aerospace<br />
Wash <strong>Primer</strong>s<br />
<strong>Metaflex</strong> ® <strong>FCR</strong> <strong>Primer</strong> is a 3-component filiform corrosion resistance<br />
washprimer which has been designed:<br />
- As an alternative pretreatment to chemical conversion coatings.<br />
- For reactivation of aged anodized or chromated alloys and sealed<br />
anodized surfaces.<br />
- For strip ability of polyurethane systems with alkaline paint removers.<br />
- To provide adhesion of subsequent polyurethane or epoxy / isocyanate<br />
primers.<br />
<strong>Metaflex</strong> ® <strong>FCR</strong> Hardener<br />
Thinner C 25/90 S (normal conditions, flashpoint
<strong>AkzoNobel</strong><br />
<strong>Aerospace</strong> <strong>Coatings</strong><br />
<strong>Metaflex</strong> ® <strong>FCR</strong> <strong>Primer</strong><br />
Induction Time 15 – 30 minutes after mixing<br />
Initial Spraying<br />
Viscosity<br />
(21ºC/70ºF)<br />
<strong>AkzoNobel</strong> <strong>Aerospace</strong> <strong>Coatings</strong><br />
1 East Water Street, Waukegan, IL 60085, USA - Phone (847) 623 4200, Fax (847) 625 3200<br />
Rijksstraatweg 31, 2171 AJ Sassenheim, The Netherlands - Phone (31) 71 308 2905, Fax (31) 71 308 2056<br />
Internet: www.akzonobel.com/aerospace<br />
56 – 65 seconds ISO-Cup 3.<br />
33 – 34½ seconds Gardner Signature Zahn-Cup #1.<br />
Note Viscosity measurements are provided as guidelines only and are not to be<br />
used as quality control parameters. Certified information is provided by<br />
certification documentation available on request.<br />
Pot Life<br />
(21ºC/70ºF)<br />
Dry Film<br />
Thickness<br />
(DFT)<br />
Application<br />
Recommendations<br />
6 hours.<br />
6 – 10 micron (μm)<br />
0.25 – 0.4 mils<br />
Conditions Temperature:<br />
Relative Humidity:<br />
Equipment Air<br />
HVLP<br />
Air Electrostatic<br />
Airless Electrostatic<br />
Number of<br />
Coats<br />
Cleaning of<br />
Equipment<br />
15 – 35ºC<br />
59 – 95ºF<br />
35 – 75%<br />
1.4 mm nozzle orifice<br />
1.4 mm nozzle orifice<br />
1.2 mm nozzle orifice<br />
6.11 – 6.13, (.011 - .013 inch) angle 60º<br />
Spray an even wet cross coat or a cross coat directly followed by a single<br />
coat.<br />
Solvent Cleaning C 28/15 or Solvent Cleaning 98068<br />
Note The quality of the application of all coatings will be influenced by the spray<br />
equipment chosen and the temperature, humidity, and air flow of the paint<br />
application area. When applying the product for the first time, it is<br />
recommended that test panels be prepared in order to identify the best<br />
equipment settings to be used in optimizing the performance and<br />
appearance of the coating.<br />
Page 2 of 3 (Code 10-01)
<strong>AkzoNobel</strong><br />
<strong>Aerospace</strong> <strong>Coatings</strong><br />
Physical Properties<br />
Drying Times<br />
(21ºC/70ºF)<br />
Theoretical<br />
Coverage<br />
Gloss (60º) Matt<br />
<strong>Metaflex</strong> ® <strong>FCR</strong> <strong>Primer</strong><br />
<strong>AkzoNobel</strong> <strong>Aerospace</strong> <strong>Coatings</strong><br />
1 East Water Street, Waukegan, IL 60085, USA - Phone (847) 623 4200, Fax (847) 625 3200<br />
Rijksstraatweg 31, 2171 AJ Sassenheim, The Netherlands - Phone (31) 71 308 2905, Fax (31) 71 308 2056<br />
Internet: www.akzonobel.com/aerospace<br />
Dry to dust<br />
Recoatable minimum<br />
Recoatable maximum<br />
15 minutes<br />
2 hours<br />
8 hours<br />
25 m 2 per liter base material at 6 μm dry film thickness<br />
1018 ft 2 per US gallon base at 0.25 mil dry film thickness<br />
Color Translucent brownish yellow<br />
Flash-point <strong>Metaflex</strong> ® <strong>FCR</strong> <strong>Primer</strong><br />
<strong>Metaflex</strong> ® <strong>FCR</strong> Hardener<br />
Thinner C 25/90 S<br />
Thinner 96184<br />
Thinner 98056<br />
Storage<br />
Safety Precautions<br />
Change language