Configurator primergy rx300 s7 - fujitsu global
Configurator primergy rx300 s7 - fujitsu global
Configurator primergy rx300 s7 - fujitsu global
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1x<br />
K<br />
System configurator and order-information guide<br />
PRIMERGY RX300 S7 Status 2013-02-28<br />
Section VII Modular Raid 0/1, Raid5 for SAS or SATA HD`s. On-board Controller for max. 4x 2.5" SATA or SAS HD`s<br />
L<br />
On board SATA Controller with 3 Gb/sec and up to 4x 2.5" SATA HDDs (no additional controller required)<br />
For up to 4x 2.5" SAS HDDs with RAID 0/1 functionality a Patsburg Upgrade Kit is required<br />
For all other HDD configurations a modular RAID-controller is required<br />
Following optional onboard SAS RAID can be selected for 4x2.5" HDDs or one SAS Tape device<br />
S26361-F3674-E1<br />
Onboard 4 port SAS Controller<br />
LSI<br />
Patsburg B<br />
RAID 0, 1 & 10<br />
no controller cache<br />
SAS 1.0 (3Gb/sec)<br />
4 internal ports<br />
PCIe x4<br />
no PCI slot required<br />
max. 1x per system<br />
For more than 4 hard disks or 6 Gb/sec one of the following modular RAID-controllers is required<br />
Modular Raid 0/1 controller with IME support for SAS/SATA<br />
This RAID controller supports max. 8 HDDs on internal SAS ports<br />
Modular Raid 5 controller for SAS/SATA<br />
RAID levels 0, 1, 10, 5, 50, 6 and 60 The FBU is an option for the controller<br />
are supported. which can be used once per controller.<br />
This RAID controller supports max. 16 HDDs If the FBU option has been choosen, the<br />
combined with internal SAS expander TFM Module is needed once per FBU.<br />
S26361-F3554-E8 S26361-F3554-E512 S26361-F3669-E1<br />
RAID Ctrl SAS 6G 8port internal RAID Ctrl SAS 6G 8port internal RAID Ctrl SAS 6G 8port internal<br />
Based on chip LSISAS2008 Based on chip LSISAS2108 Based on chip LSISAS2208<br />
LSI MegaRAID LSI MegaRAID LSI MegaRAID<br />
no Cache, no BBU 512MB Cache with ECC 1GB Cache with ECC<br />
RAID 0, 1 & 10 RAID 0, 1, 10, 5, 50, 6, 60 RAID 0, 1, 10, 5, 50, 6, 60<br />
Support for 3Gb/s and 6Gb/s optional BBU optional FBU<br />
SATA and SAS hard drives Support for 3Gb/s and 6Gb/s Support for 3Gb/s and 6Gb/s<br />
PCIe x8 SATA and SAS hard drives SATA and SAS hard drives<br />
Low-profile MD2 form factor PCIe x8 PCIe x8<br />
max. 1x per system Low-profile MD2 form factor Low-profile MD2 form factor<br />
max. 1x per system max. 1x per system<br />
S26361-F3257-E216<br />
Cache Battery Backup Unit<br />
with 16 cm cable set<br />
max. 1x per Controller<br />
S26361-F3669-L660 Lose delivery FBU option S26361-F3669-E100<br />
RAID Key FastPath TFM Module for FBU option<br />
License Activation Key S26361-F3669-L100<br />
for 1 Controller TFM Module for FBU option max. 1x per Controller<br />
S26361-F3669-L661 max. 1x per Controller<br />
RAID Key CacheCade<br />
License Activation Key S26361-F3669-L110 S26361-F3669-E125<br />
for 1 Controller Flash Backup Unit Flash Backup Unit<br />
with 25cm, 55cm, 70cm cable set with 25cm cable set<br />
max. 1x per Controller max. 1x per Controller<br />
Fujitsu Technology Solutions x86 PRIMERGY Serve 22 of 30
Change language