Configurator primergy rx300 s7 - fujitsu global

More documents

Recommendations

Info

1x K System configurator and order-information guide PRIMERGY RX300 S7 Status 2013-02-28 Section VII Modular Raid 0/1, Raid5 for SAS or SATA HD`s. On-board Controller for max. 4x 2.5" SATA or SAS HD`s L On board SATA Controller with 3 Gb/sec and up to 4x 2.5" SATA HDDs (no additional controller required) For up to 4x 2.5" SAS HDDs with RAID 0/1 functionality a Patsburg Upgrade Kit is required For all other HDD configurations a modular RAID-controller is required Following optional onboard SAS RAID can be selected for 4x2.5" HDDs or one SAS Tape device S26361-F3674-E1 Onboard 4 port SAS Controller LSI Patsburg B RAID 0, 1 & 10 no controller cache SAS 1.0 (3Gb/sec) 4 internal ports PCIe x4 no PCI slot required max. 1x per system For more than 4 hard disks or 6 Gb/sec one of the following modular RAID-controllers is required Modular Raid 0/1 controller with IME support for SAS/SATA This RAID controller supports max. 8 HDDs on internal SAS ports Modular Raid 5 controller for SAS/SATA RAID levels 0, 1, 10, 5, 50, 6 and 60 The FBU is an option for the controller are supported. which can be used once per controller. This RAID controller supports max. 16 HDDs If the FBU option has been choosen, the combined with internal SAS expander TFM Module is needed once per FBU. S26361-F3554-E8 S26361-F3554-E512 S26361-F3669-E1 RAID Ctrl SAS 6G 8port internal RAID Ctrl SAS 6G 8port internal RAID Ctrl SAS 6G 8port internal Based on chip LSISAS2008 Based on chip LSISAS2108 Based on chip LSISAS2208 LSI MegaRAID LSI MegaRAID LSI MegaRAID no Cache, no BBU 512MB Cache with ECC 1GB Cache with ECC RAID 0, 1 & 10 RAID 0, 1, 10, 5, 50, 6, 60 RAID 0, 1, 10, 5, 50, 6, 60 Support for 3Gb/s and 6Gb/s optional BBU optional FBU SATA and SAS hard drives Support for 3Gb/s and 6Gb/s Support for 3Gb/s and 6Gb/s PCIe x8 SATA and SAS hard drives SATA and SAS hard drives Low-profile MD2 form factor PCIe x8 PCIe x8 max. 1x per system Low-profile MD2 form factor Low-profile MD2 form factor max. 1x per system max. 1x per system S26361-F3257-E216 Cache Battery Backup Unit with 16 cm cable set max. 1x per Controller S26361-F3669-L660 Lose delivery FBU option S26361-F3669-E100 RAID Key FastPath TFM Module for FBU option License Activation Key S26361-F3669-L100 for 1 Controller TFM Module for FBU option max. 1x per Controller S26361-F3669-L661 max. 1x per Controller RAID Key CacheCade License Activation Key S26361-F3669-L110 S26361-F3669-E125 for 1 Controller Flash Backup Unit Flash Backup Unit with 25cm, 55cm, 70cm cable set with 25cm cable set max. 1x per Controller max. 1x per Controller Fujitsu Technology Solutions x86 PRIMERGY Serve 22 of 30
System configurator and order-information guide L PRIMERGY RX300 S7 Status 2013-02-28 SAS-/SCSI-/ Fibre-Channel Controller Low Profile SAS controller for external backup drives No mix and match of different All controllers for the connection of external FC or FCoE controllers possible. storage system are delivered without cables. For the configuration of external cabling see the configurator for external storage system. Fibre Channel Controller for external storage systems For Fibre Channel SAN also other componets like S26361-F3631-E201 S26361-F3631-E202 switches, SFPs and optical wires are orderable 8GBit/s FC Controller 8GBit/s FC Controller (for details see price liste) Qlogic Qlogic QLE2560, low profile bracket QLE2562, low profile bracket 1 channel 8GBit/sec FC Controller 2 channel 8GBit/sec FC Controller loose delivery: LC Interface for 50µm Fiber LC Interface for 50µm Fiber Single channel S26361-F3961-L201 PCIe x8, 170mm PCIe x8, 170mm Dual Channel S26361-F3961-L202 max. 4x per system max. 4x per system with mounted LP bracket S26361-F3961-E201 S26361-F3961-E202 8GBit/s FC Controller 8GBit/s FC Controller 6x Emulex Emulex M S26361-F3628-E201 SAS Controller 6Gb/s 8 port LP LSI SAS9200-8e LP PCIe 2.0 x4, ext: 8 port max. 3x per system LPe1250, low profile bracket LPe12002, low profile bracket FH bracket is not included 1 channel 8GBit/sec FC Controller 2 channel 8GBit/sec FC Controller loose delivery: LC Interface for 50µm Fiber LC Interface for 50µm Fiber Single channel S26361-F3631-L201 PCIe x4, 170mm PCIe x4, 170mm Dual Channel S26361-F3631-L202 max. 4x per system max. 4x per system with mounted LP bracket as soon as avaiable as soon as available S26361-F4994-E201 S26361-F4994-E202 16GBit/s FC Controller 16GBit/s FC Controller Emulex Emulex LPe16000, low profile bracket LPe16002, low profile bracket FH bracket is not included 1 channel 16GBit/sec FC Contr. 2 channel 16GBit/sec FC Contr. loose delivery: LC Interface for 50µm Fiber LC Interface for 50µm Fiber Single channel S26361-F4994-L501 PCIe x8, 170mm PCIe x8, 170mm Dual Channel S26361-F4994-L502 max. 6x per system max. 6x per system contains LP and FH brackets. Fujitsu Technology Solutions x86 PRIMERGY Serve 23 of 30
Page 1 and 2: PRIMERGY RX300 S7 System configurat
Page 3 and 4: Configuration diagram PRIMERGY RX30
Page 5 and 6: PRIMERGY-Software Configurators and
Page 7 and 8: System configurator and order-infor
Page 11 and 12: D Section IV Graphics System config
Page 15 and 16: 1. Independent Channel Mode Channel
Page 19 and 20: H SAS Controller for internal Backu
Page 21: J S26361-F4581-E100 S26361-F4581-E2
Page 27 and 28: 2x N2 E) 10GbE 2-Port SFP+ for MMF

Configurator primergy rx300 s7 - fujitsu global

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?