Using herbicides on lantana (PDF 704KB)
Using herbicides on lantana (PDF 704KB)
Using herbicides on lantana (PDF 704KB)
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
General advice and<br />
manufacturers’ recommendati<strong>on</strong>s<br />
General advice may vary between<br />
<str<strong>on</strong>g>herbicides</str<strong>on</strong>g>, therefore any use of<br />
these recommendati<strong>on</strong>s should be in<br />
strict accordance with the label of the<br />
herbicide product being used.<br />
Mixed spray<br />
• Only mix herbicide in quantities<br />
that are likely to be used in <strong>on</strong>e<br />
day, and use promptly. Some<br />
<str<strong>on</strong>g>herbicides</str<strong>on</strong>g>, like Graz<strong>on</strong> ® DS,<br />
Starane ® 200 and Tord<strong>on</strong> ® 75-D,<br />
can remain in diluted form<br />
for up to <strong>on</strong>e week. Other<br />
<str<strong>on</strong>g>herbicides</str<strong>on</strong>g> cannot be stored<br />
for more than two days<br />
(e.g. metsulfur<strong>on</strong> methyl) and<br />
some cannot be stored for<br />
prol<strong>on</strong>ged periods in direct<br />
sunlight (e.g. Lantana ® 600).<br />
• Some <str<strong>on</strong>g>herbicides</str<strong>on</strong>g> require<br />
agitati<strong>on</strong> to keep active<br />
ingredients in suspensi<strong>on</strong>, but<br />
for others this can create<br />
excessive foaming.<br />
• Be aware of the mixing c<strong>on</strong>tainer<br />
being used. Some <str<strong>on</strong>g>herbicides</str<strong>on</strong>g><br />
such as metsulfur<strong>on</strong> methyl and<br />
glyphosate cannot be mixed in<br />
galvanised steel or unlined steel<br />
c<strong>on</strong>tainers, as this will produce<br />
hydrogen gas. Other <str<strong>on</strong>g>herbicides</str<strong>on</strong>g><br />
may have corrosive effects <strong>on</strong><br />
aluminium.<br />
• Some <str<strong>on</strong>g>herbicides</str<strong>on</strong>g> are pre-packed<br />
with two mixer chemicals or solid<br />
<str<strong>on</strong>g>herbicides</str<strong>on</strong>g> in water-soluble bags<br />
to allow easier mixing and<br />
reduce the chance of mess or<br />
spillage. Some pre-packed<br />
herbicide gels are also available<br />
for cut stump work for ease of<br />
applicati<strong>on</strong>.<br />
<str<strong>on</strong>g>Using</str<strong>on</strong>g> <str<strong>on</strong>g>herbicides</str<strong>on</strong>g> <strong>on</strong> <strong>lantana</strong>: a guide to best management practices<br />
• Be aware of the hardness of the<br />
water. Reduced results may<br />
occur if the herbicide is mixed<br />
with water c<strong>on</strong>taining soil or<br />
calcium salts. Some <str<strong>on</strong>g>herbicides</str<strong>on</strong>g><br />
are readily miscible in hard or<br />
soft waters.<br />
Cleaning<br />
• Clean all equipment by<br />
thoroughly washing with water<br />
for at least 10 minutes (or as per<br />
the label directi<strong>on</strong>s) and clean<br />
tanks by using the cleaning<br />
chemicals specified for that<br />
product. When some cleaning<br />
chemicals are mixed with certain<br />
<str<strong>on</strong>g>herbicides</str<strong>on</strong>g> they may have<br />
chemical reacti<strong>on</strong>s and produce<br />
harmful gases that are<br />
flammable or toxic.<br />
25